Basic Operation Guide

Safety Instructions
Important Safety Instructions.3

Solving Problems

Error Messages.. 20 Problems and Solutions. 20

Control Panel Functions

Control Panel..4
Summary of Panel Settings
Copy Mode.. 24 Memory Card Mode.. 25 Photo Print Mode. 26 Setup Mode.. 27

Handling Paper

Selecting Paper.6 Loading Paper..6

Copying

Placing Originals on the Document Table..8 Copying Photos.8 Copying Documents..9
Printing from a Memory Card
Handling a Memory Card.10 Printing Photos.11 Selecting and Printing Photos Using an Index Sheet.12
Printing from a Digital Camera
Using the PictBridge or USB DIRECT-PRINT..14

Replacing Ink Cartridges

Precautions.15 Removing and Installing Ink Cartridges..15

Maintenance

Checking the Ink Cartridge Status..18 Checking and Cleaning the Print Head..18 Aligning the Print Head..19

English

-for use without a computer-
Where to Find Information
Paper manuals Start Here Be sure to read this sheet first. This sheet tells you how to set up the printer and install the software. Basic Operation Guide -for use without a computerThis book provides information on using the printer without connecting to your computer, such as instructions on copying, or printing from a memory card. If you have problems using the printer, see the Solving Problems chapter in this book.

(this book)

Online manuals User's Guide This guide provides instructions for printing and scanning from your computer and information on the software. This guide is included in the software CD-ROM and installed automatically when you install the software. To read this guide, double-click the icon on your desktop. Online help Online help is built into each application included on the software CD-ROM. It provides detailed information on the application.
Warnings, Cautions, and Notes
Follow these guidelines as you read your instructions:
w Warning: Warnings must be followed carefully to avoid bodily injury. c Caution: Cautions must be observed to avoid damage to your equipment. Note: Notes contain important information about the printer. Tip: Tips contain hints for using the printer.

Copyright Notice

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this product. Epson is not responsible for any use of this information as applied to other printers. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as Epson Approved Products by Seiko Epson Corporation. EPSON is a registered trademark and EPSON STYLUS and Exceed Your Vision are trademarks of Seiko Epson Corporation. USB DIRECT-PRINT and the USB DIRECT-PRINT logo are trademarks of Seiko Epson Corporation. Copyright 2002 Seiko Epson Corporation. All rights reserved. DPOF is a trademark of CANON INC., Eastman Kodak Company, Fuji Photo Film Co., Ltd. and Matsushita Electric Industrial Co., Ltd. SDHC is a trademark. Memory Stick, Memory Stick Duo, Memory Stick PRO, Memory Stick PRO Duo, MagicGate Memory Stick, MagicGate Memory Stick Duo, and Memory Stick Micro are trademarks of Sony Corporation. xD-Picture Card is a trademark of Fuji Photo Film Co., Ltd. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

Paper Type Paper Type Setting Plain Paper Loading capacity 12 mm 80 sheets 80 sheets Matte 20 sheets 80 sheets
2. Open the output tray and slide out the extensions.
Plain paper * Epson Bright White Paper Epson Premium Ink Jet Plain Paper Epson Matte Paper Heavyweight Epson Photo Quality Ink Jet Paper Epson Premium Glossy Photo Paper Epson Premium Semigloss Photo Paper Epson Ultra Glossy Photo Paper Epson Glossy Photo Paper
3. Flip the feeder guard forward.

Prem. Glossy 20 sheets

Ultra Glossy Photo Paper

20 sheets 20 sheets

* You can use paper with a weight of 64 to 90 g/m2.

4. Slide the edge guide.

8. Flip the feeder guard back.
5. Load the paper short edge first, even for landscape printing, with the printable side up.
The printable side is often whiter or brighter than the other side.

cm (in.) and cm (in.)

Follow the same steps to load A4 paper.
6. Place behind the tabs.
7. Slide the edge guide to the right. Make sure it fits under the arrow inside the left edge guide

Note: 2. Press OK. Note:

If your photos have faded over time, select ON to bring them back to life.
The copied image may not be exactly the same size as the original. Depending on the type of paper used, print quality may decline in the top and bottom areas of the printout, or these areas may be smeared.
Placing Originals on the Document Table
1. Open the document cover and place your original face-down on the document table.
If you set Color Restoration to On for a normal color photo, the photo may not be printed correctly.
3. Press OK. Your photo is previewed. 4. Select the number of copies. 5. Press x Menu and change the settings (& Print settings for Photo Print mode on page 26). Then press OK. 6. Press x Start. Note: 2. Close the cover gently.
If the edges of the copy are cropped off, move the original away from the corner slightly.

Copying Photos

Copying multiple photos
Place each photo horizontally.
You can copy photos from mm to mm. You can also copy two photos at the same time. 1. Press J Photo.

5mm 5mm

You can copy two cm (in.) size photos at the same time. If the edge of the photo is missing after you print, try copying them one at a time.
Cropping and enlarging a photo
6. Select the number of copies. 7. Press x Menu and change the settings (& Print settings for Photo Print mode on page 26). Then press OK to apply the new settings. 8. Press x Start.

Copying Documents

You can crop out the rest of the photo and print just the main subject by itself when you copy a photo. 1. Press J Photo and follow the instructions on the preceding pages to preview the photo. 1. Press r Copy.

2. Select a copy settings.
2. Press G [Display/Crop]. You see the cropping screen.
Select Color for color copies or B&W for black-and-white copies. Select a layout option. Set the number of copies.
3. Use the following button to set the area you want to crop.
Copies +, u, d, l, r Change the frame size. Move the frame.
3. Press x Menu to change the settings (& Print settings for Copy mode on page 24). Then press OK. 4. Press x Start. Note:
4. Press OK to confirm the cropped image. Note:
To readjust the frames position, press y Back to return to the previous screen.
Place your photo 5 mm away from the edge of the document table. Also when you place two photos, position each photo at least 5 mm away from the adjacent photo. You can copy several different sized photos at the same time, as long as they are larger than mm and all fit inside the mm area.
5. When you have finished checking the cropped image, press OK. Note:
The image. icon is displayed on the cropped

Handling a Memory Card

Inserting a memory card
If a digital camera is connected to the printer, disconnect it before you insert your memory card.
1. Make sure no memory cards are in the slots. Then insert your memory card. c Caution:
Do not insert more than one memory card at a time. Do not try to force the memory card into the slot. Memory cards will not go all the way in. Make sure you check which direction the card should be inserted, and if the card needs an adapter, make sure you attach the adapter before inserting the card. Otherwise, you may not be able to remove the card from the printer.
xD-Picture Card xD-Picture Card Type M xD-Picture Card Type H
SD Memory Card SDHC Memory Card MultiMediaCard

Compact Flash Microdrive

miniSD card* miniSDHC card*
microSD card* microSDHC card* (* Adapter required)

Removing the memory card

1. Make sure the memory card light is not flashing. 2. Remove the memory card by pulling it straight out.

Printing Photos

1. Press C Memory Card.
Memory Stick Memory Stick PRO MagicGate Memory Stick
2. Select one of the settings in the following table for viewing/printing your photos, and then press OK. Follow the instructions below to select the photos and set the number of copies.
Setting View and Print Photos Print All Photos Print by Date
Instructions Select a photo and set the number of copies. Press OK. Set the number of copies. You can view all of the photos by using l or r. Select the date, and then place a check mark and press OK. Press OK again, and select a photo. Set the number of copies. See Selecting and Printing Photos Using an Index Sheet on page 12. Your printer displays the photos on the memory card in sequence. When you see the photo that you want to print, press OK and set the number of copies. If you want to print additional photos, select the photo you want to print. Then set the number of copies.

Latest 30 Latest 60 Latest 90

6. Press x Start. Note:

Make sure the triangle mark on the upper left corner of the index sheet is printed properly. If the index sheet is not printed correctly, the printer cannot scan it.
2. Selecting photos from the index sheet
On the index sheet, use a dark pen or pencil to fill in the ovals and make your selections.
2. Close the document cover. 3. Load the size of photo paper you marked on the index sheet (& page 6). 4. On the LCD screen, make sure Print Photos from Index Sheet is selected, then press x Start. Note:
If you have more than one index sheet, wait each time until printing is complete. Then repeat the steps above to scan and print from each additional sheet.
Using the PictBridge or USB DIRECT-PRINT
PictBridge and USB DIRECT-PRINT let you print your photos by connecting your digital camera directly to the printer. Make sure your camera and photos meet the following requirements.
Direct printing compatibility File format Image size PictBridge or USB DIRECT-PRINT USB port JPEG pixels to pixels
6. Connect the USB cable from your camera to the USB port on the front of the printer.
1. Make sure your printer is not printing from a computer. 2. Remove any memory cards from the printer. 3. Press F [Setup]. 4. Select PictBridge Setup, then press OK. 5. Select the print settings (& Print settings for Memory Card mode on page 25). Then press OK.
7. Make sure your camera is turned on and use it to select the photos, adjust any necessary settings, and print your photos. See your cameras manual for details. Note:
Depending on the settings on this printer and the digital camera, some combinations of paper type, size, and layout may not be supported. Some of the settings on your digital camera may not be reflected in the output.

Precautions

w Warning:
If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them immediately with water. If you still have discomfort or vision problems, see a doctor immediately.
Never move the print head by hand. When an ink cartridge is expended, you cannot continue printing even if the other cartridges still contain ink. Leave the expended cartridge installed until you have obtained a replacement. Otherwise the ink remaining in the print head nozzles may dry out.
1. Do one of the following: If an ink cartridge is expended: Look at the message on the LCD screen to find out which cartridge should be replaced, then press OK. If an ink cartridge is not expended: Press F [Setup]. Select Maintenance, and press OK. Select Change Ink Cartridge, and press OK. 2. Lift up the scanner unit.

Some ink is consumed each time cartridges are inserted because the printer automatically checks their reliability. For maximum ink efficiency, only remove an ink cartridge when you are ready to replace it. Ink cartridges with low ink status may not be used when reinserted. Epson recommends the use of genuine Epson ink cartridges. The use of non-genuine ink may cause damage that is not covered by Epson's warranties, and under certain circumstances, may cause erratic printer behavior. Epson cannot guarantee the quality or reliability of non-genuine ink. Information about the ink cartridge status is not displayed when non-genuine ink is used.

c Caution:

Do not lift up the scanner unit when the document cover is open.
3. Open the cartridge cover.
Removing and Installing Ink Cartridges
Make sure you have a new ink cartridge before you begin. Once you start replacing a cartridge, you must complete all the steps in one session. Note:
Do not open the ink cartridge package until you are ready to install it in the printer. The cartridge is vacuum packed to maintain its reliability.
Never attempt to open the cartridge cover while the print head is moving. Wait until the print head has stopped at the replacement position.
4. Squeeze the tab and lift it straight up.
You must remove the yellow tape from the cartridge before installing it; otherwise, print quality may decline or you may not be able to print. Do not remove the seal.
Do not refill the ink cartridge. Other products not manufactured by Epson may cause damage that is not covered by Epson's warranties, and under certain circumstances, may cause erratic printer behavior.
Be sure to always install an ink cartridge into the printer immediately following the removal of the current ink cartridge. If the ink cartridge is not installed promptly, the print head may dry out, rendering it unable to print.
If it is difficult to remove the cartridge, lift the cartridge with more force until comes out.
7. Place the new ink cartridge in the cartridge holder and press it down until it clicks into place.
5. Before you open the new ink cartridge package, shake it four or five times. Then remove it from the package.

8. Close the ink cartridge cover and press it until it clicks into place. c Caution: c Caution:
Be careful not to break the hooks on the side of the ink cartridge when you remove it from the package. Do not touch the green chip on the side of the cartridge. This can damage the ink cartridge. If you find it difficult to close the cover, make sure all the cartridges are firmly seated. Press down on each cartridge until you hear it click into place. Do not attempt to force the cover closed.
6. Remove the yellow tape.
9. Close the scanner unit.
10. Press OK. The ink delivery system starts charging. c Caution:
Do not turn off the printer during ink charging as this will waste ink.
If a message on the LCD screen still tells you that a cartridge should be replaced, the ink cartridges may not be installed properly. Press OK again, and press down the ink cartridge until it clicks into place.
Checking the Ink Cartridge Status
You can check which cartridge is low. 1. Press F [Setup]. 2. Select Ink Levels, then press OK. You see a graphic showing the ink cartridge status:
C (Cyan), M (Magenta), Y (Yellow), B (Black)
2. Press F [Setup]. (If you have just finished cleaning the print head, you can start the nozzle check by pressing x Start.) 3. Select Maintenance, then press OK. 4. Select Nozzle Check, then press OK. 5. Press x Start. 6. Examine the nozzle check pattern you printed.
If your printout looks like the one shown below, the print head does not need to be cleaned yet. Press OK to return to the main menu.
When your ink starts getting low, is displayed. 3. Press y Back to return to the previous screen. Note:
Epson cannot guarantee the quality or reliability of non-genuine ink. If non-genuine ink cartridges are installed, the ink cartridge status may not be displayed.
If your printout has gaps like the one shown below, clean the print head as described in the next section.

Cleaning the print head

4. Press x Start. The printer begins cleaning the print head. Follow the message on the LCD screen.
8. Enter the numbers for the other patterns in the same way. 9. When you finish, press OK and you see a message indicating alignment is complete.
See your online Users Guide for help on using the printer with a computer.

Problems and Solutions

Setup problems
LCD screen came on and then went out. The printers voltage may not match the outlet rating. Turn off the printer and unplug it immediately. Then, check the printer labels. c Caution
If the voltage does not match, DO NOT PLUG YOUR PRINTER BACK IN. Contact your dealer.

Error Messages

Error Messages A printer error has occurred. Turn off the printer, then press On button to turn on. See your documentation. A scanner error has occurred. See your documentation. Waste ink pad in the printer is saturated. Contact your dealer to replace it. Cannot recognize ink cartridges. Make sure the ink cartridges are installed correctly. Solution Turn the printer off and then back on. Make sure that no paper is still in the printer. If the error message still appears, contact your dealer. Turn the printer off and then back on. If the error message still appears, contact your dealer. Contact your dealer to replace it.
The printer makes noise after you turn it on. Make sure the protective tape is not blocking the print head. After releasing the print head turn off the power, wait a moment, then turn it back on. The printer makes noise after ink cartridge installation. When you install ink cartridges, the ink delivery system must be charged. Wait until charging is finished (the charging message disappears from the LCD screen), then turn off the printer. If you turn it off too soon, it may use extra ink the next time you turn it on. Make sure the ink cartridges are seated securely and no packing material remains in the printer. Open the cartridge cover and push the cartridges down until they click into place. Turn off the power, wait a moment, then turn it back on. A screen that prompts you to restart the computer did not appear after finishing the software installation.
Make sure the ink cartridges are installed correctly. (& Removing and Installing Ink Cartridges on page 15). Then try again. Make sure the memory card has been inserted correctly. If so, check to see if there is a problem with the card and try again.

Cannot recognize the memory card or disk.
The software has not been installed correctly. Eject and insert the software CD-ROM, and then install the software again. The terms on the LCD screen are not displayed in your language.
If the language displayed on the LCD screen is not the one you want, select the language you want from the Setup menu.

Paper feed problems

Paper does not feed correctly or is jammed. If paper does not feed, remove it from the sheet feeder. Fan the paper, load it against the right side, and slide the left edge guide against the paper (but not too tightly). Make sure the paper is not in front of the feeder guard. Do not load paper above the c arrow mark inside the left edge guide (& Loading Paper on page 6). If the paper is stuck inside the printer, press the P On button to turn it off. Open the scanner unit and remove any paper inside, including any torn pieces. Close the scanner unit. If the paper remains near the sheet feeder, gently pull it out. Then turn the printer back on and carefully reload paper.
LCD screen is off. Make sure that the printer is on. Turn off the printer and make sure that the power cord is securely plugged in. Make sure that your outlet works and is not controlled by a wall switch or timer. The printer makes printing sounds, but nothing prints. The print head nozzles may need cleaning (& Cleaning the print head on page 18). Make sure the printer is on a flat, stable surface. The margins are incorrect.
Make sure your original is positioned in the right bottom corner of the document table. If the edges of the copy are cropped off, move the original away from the corner slightly. Make sure the paper size settings are correct for the paper you have loaded. Make sure your paper is loaded short edge first, all the way to the right, with the left edge guide lightly against the paper (& page 6). Do not load paper above the c arrow mark inside the left edge guide (& page 6). Select Actual instead of Auto Fit Page or adjust the zoom settings. Change the Expansion setting to adjust the amount of image that extends beyond the paper size during borderless printing. Blank pages are printed. The print head nozzles may need cleaning (& Cleaning the print head on page 18).

If paper jams frequently, make sure the left edge guide is not pushed too tightly against the paper. Try loading fewer sheets of paper. Make sure you are not using paper with binder holes.

Print quality problems

You see banding (light lines) in your printouts or copies.
Clean the print head (& Checking the print head on page 18). Make sure you select the correct paper type (& Selecting Paper on page 6). Make sure the printable (whiter or glossier) side of the paper is face up. Use up ink cartridges within six months after installing them. The ink cartridges may need replacing (& Removing and Installing Ink Cartridges on page 15).
Printing and copying problems
Align the print head (& Aligning the Print Head on page 19). Clean the document table. See your online User's Guide. If a moir (cross-hatch) pattern appears on your copy, change the zoom setting or shift the position of your original. Your printout is blurry or smeared.
Make sure the document is placed flat against the document table. If only part of the image is blurred, your original may be wrinkled or warped. Make sure the printer is not tilted or placed on an uneven surface. Make sure your paper is not damp, curled, or loaded face down (the whiter or glossier printable side should be face up). Load new paper face-up.
Make sure you select the correct paper type (& Selecting Paper on page 6). Make sure your paper is not damaged, old, dirty, or loaded face-down. If it is, load new paper with the whiter or glossier side face-up. When you select Standard or Best as the quality setting, select Off as the bidirectional setting. Bidirectional printing decreases print quality. Your printout is grainy.
Make sure you select the correct paper type (& Selecting Paper on page 6). Use a support sheet with special paper or try loading your paper one sheet at a time. Load your paper one sheet at a time. Remove sheets from the output tray so not too many collect at a time. Clean the print head (& Cleaning the print head on page 18). Align the print head (& Aligning the Print Head on page 19).
Make sure you select Best as the quality setting. If you are printing or copying a photo, make sure you are not enlarging it too much. Try printing it smaller. Align the print head (& Cleaning the print head on page 18). You see incorrect or missing colors. Clean the print head (& Cleaning the print head on page 18). The ink cartridges may be old or low on ink. Replace an ink cartridge (& Removing and Installing Ink Cartridges on page 15). Make sure you loaded the right paper and selected the correct setting for it on the LCD screen. If your paper runs out, replace it as soon as possible. If the printer is left without paper for a long period of time, the colors of your next copy or print job may be incorrect. Your printout is too dark. If you are copying, press x Menu and adjust the Density. The image size or position is incorrect. Make sure you loaded the right paper and selected the correct setting for it on the LCD screen. Make sure the original is placed correctly on the document table (& Placing Originals on the Document Table on page 8). Clean the document table. See your online User's Guide.

To clean the inside of the printer, make a copy without placing a document on the document table. Load and eject dry paper several times. See your online User's Guide.
Use only paper recommended by Epson and genuine Epson cartridges. Clean the document table. See your online User's Guide. Your printout is faint or has gaps. Clean the print head (& Cleaning the print head on page 18). If you notice jagged vertical lines, you may need to align the print head (& Aligning the Print Head on page 19). The ink cartridges may be old or low on ink. Replace an ink cartridge (& Removing and Installing Ink Cartridges on page 15).

Scan quality problems

Only part of the photo is scanned.
The printer has non-readable areas at the edges. Move the photo away from the edges slightly. The file size is too big. Try changing the quality settings.

For more solutions

If you cannot solve the problem using the troubleshooting, contact customer support services for assistance. You can find customer support information for your area in your online User's Guide or warranty card. If it is not listed there, contact the dealer where you purchased your printer.

Copy Mode

Menu Copies Color/B&W Layout
Setting Item 1 to 99 Color, B & W With Border Borderless
Description Copies your original with a standard 3-mm margin. Copies your photo all the way to the edges of the paper.
Your image is slightly enlarged and cropped to fill the sheet of paper. Print quality may decline in the top and bottom areas of the printout, or the area may be smeared when printing.
Print settings for Copy mode

Menu Zoom

Setting Item Actual, Auto Fit Page
Description Select Actual to print your photo at its original size. Select Auto Fit Page for borderless printing and resizing the image to fit various common paper sizes. You can also resize the original to a specific scale using Copies + or -. -

Paper Type

Plain Paper, Matte, Prem. Glossy, Ultra Glossy, Photo Paper 10 x 15 cm, 13 x 18 cm, A4

Paper Size

Menu Quality Density Expansion
Setting Item Draft, Standard, Best -4 to +4 Standard, Mid., Min.

Description -

Select the amount the image is expanded when you select Borderless. Standard: The image is slightly enlarged and cropped to fill the sheet of paper. Mid.: Margins might be printed. (Low expansion rate.) Min.: Margins might be printed. (Lowest expansion rate.)

Memory Card Mode

Setting Item View and Print Photos Print All Photos Print by Date Print Index Sheet Slide Show
Description Prints only the photos that you choose. Prints all the photos on your memory card. Prints photos by the date they ware taken. Prints thumbnails of the photos on your memory card and lets you select which ones you want to print. Displays all photos on your memory card as a slide show and prints photos that you choose.

Print settings for Memory Card mode

Menu Paper Type

Setting Item Prem. Glossy, Ultra Glossy, Photo Paper, Plain Paper, Matte

Menu Paper Size Layout

Setting Item 10 x 15 cm, 13 x 18 cm, 16:9 wide, A4 Borderless
Description Prints your photo all the way to the edges of the paper.
Your image is slightly enlarged and cropped to fill the sheet of paper. Print quality may decline in the top and bottom areas of the printout, or the area may be smeared when printing. With Border Quality Date Standard, Best None, yyyy.mm.dd, mmm.dd.yyyy, dd.mmm.yyyy On, Off Prints your photo with a white margin at the edge. Prints the date your photo was taken.

Bidirectional

Select On to increase the print speed. Select Off to improve the print quality (but your photos print more slowly). Select the amount the image is expanded when you select Borderless. Standard: The image is slightly enlarged and cropped to fill the sheet of paper. Mid.: Margins might be printed. (Low expansion rate.) Min.: Margins might be printed. (Lowest expansion rate.)

Expansion

Standard, Mid., Min.

Photo Print Mode

Color Restoration Setting
Setting Item Restoration Description Select On to restore faded photo.
Print settings for Photo Print mode
Setting Item Prem. Glossy, Ultra Glossy, Photo Paper, Matte 10 x 15 cm, 13 x 18 cm, A4 Borderless

Paper Size Layout

Copies your photo all the way to the edges of the paper.
Your image is slightly enlarged and cropped to fill the sheet of paper. Print quality may decline in the top and bottom areas of the printout, or the area may be smeared when printing. With Border Quality Expansion Standard Standard, Mid., Min. Copies your original with a standard 3-mm margin. Select the amount the image is expanded when you select Borderless. Standard: The image is slightly enlarged and cropped to fill the sheet of paper. Mid.: Margins might be printed. (Low expansion rate.) Min.: Margins might be printed. (Lowest expansion rate.)

Setup Mode

Ink Levels Maintenance
Check the ink cartridge status. Nozzle Check Head Cleaning LCD Brightness Head Alignment Change Ink Cartridge Language Display Format Print a nozzle check pattern to check the condition of the print head. Clean the print head to improve the condition of the print head. -10 to +10 Adjust the alignment of the print head. Change ink cartridges before they are expended. English, French, German, Italian, Spanish, Portuguese, Dutch, Russian 1up with Info, 1up without Info, 9up
PictBridge Setup Restore Default Settings
Set the print settings when printing with a PictBridge device. Reset the LCD panel settings to the factory default settings.

Supply Ink Cartridges Printer Name Stylus CX8300 Series Stylus DX8400 Series Black T0731 T0731H T0711 T0711H Cyan T0732 T0712 Magenta T0733 T0713 Yellow T0734 T0714
Available ink cartridge sizes vary by location.

Sales Line : 0005 Visit This Product on Laptops Direct
Epson Stylus DX8400 - multifunction ( colour ) C11C690301

79.97 inc.vat

Summary
Bring quality, versatility and value to all your home printing. Print, scan and copy documents and photos from one compact desktop location and use the LCD viewer for even easier PC-free operation. This advanced all-in-one printer, scanner and copier is perfect for high-quality document and photo management. You can easily print directly from your PictBridge digital camera or memory card via the 6.3 cm LCD viewer - even without a PC. Epson's latest generation of DURABrite Ultra Ink provides laser-like text and glossy photos, and is resistant to water, smudging and fading. It is also cost-effective due to individual ink cartridges.
s s s s s s s s s s s s s s s s s s s s s s s
Product Description - Epson Stylus DX8400 - multifunction ( printer / copier / scanner ) ( colour ) Device Type - Printer / copier / scanner Copier Type - Digital Dimensions (WxDxH) - 45 cm x 34 cm x 17.9 cm Weight - 6 kg Printing Technology - Ink-jet ( colour ) Inkjet Technology - Epson Micro Piezo - 4-ink Max Copying Speed - Up to 29 ppm (mono) / up to 29 ppm (colour) Max Printing Speed - Up to 32 ppm (mono) / up to 32 ppm (colour) Max Printing Resolution - Up to 5760 x 1440 dpi (mono) / up to 5760 x 1440 dpi (colour) Scanning - 1200 x 2400 dpi Display - 2.5" Original Size - 216 x 297 mm (max) Original Type - Sheets, books Media Size - Legal (216 x 356 mm) (max) Media Type - Envelopes, plain paper, photo paper Standard Media Capacity - 120 sheets PC Connection Availability - Yes PC Connection - Hi-Speed USB, USB host Office Machine Features - Print from memory card Power - AC 230 V Environmental Standards - EPA Energy Star Manufacturer Warranty - 1 year warranty

Technical Specifications

Print quality Maximum resolution Colour Print Speed Print speed (black, normal quality, A4) Print speed (colour, normal quality, A4) 32 ppm 32 ppm 5760 x 1440 DPI Y
Print technology Print head Number of print cartridges Print technology Scanning Scanner integrated Maximum scan resolution Colour scanning Scan speed (black, normal quality, A4) Scan speed (colour, normal quality) Scan type Copying Colour copy capability Copy speed (normal quality, colour, A4) Copy speed (normal quality, black, A4) Fax Fax integrated Input capacity Standard input capacity Display Display Media formats ISO B-series sizes (B0.B9) ISO A-series sizes (A0.A9) Envelopes sizes Photo paper sizes Letter Legal Media types Printing media types System Requirements Compatible operating systems Connectivity PictBridge Direct printing Interface Energy management Power Requirements Weight & dimensions Weight Dimensions W x D x H Operating system/software Bundled software Epson Creativity Suite Epson Web-To-Page Epson Easy Photo Print Epson Scan Assistant Epson Attach - Email Epson Copy Utility ABBYY FineReader 5.0 Sprint Plus (Mac) ABBYY FineReader 6.0 Sprint Plus (PC) 5900 g 450 x 340 x 179 mm AC 220-240V Y Y USB Windows 2000/XP/XP-x64/Vista, Mac OS 10.2.8+ Photo paper B5 A4, A5, A6 No.10, DL, C6 20x25 cm, 13x18 cm, 10x15 cm, 9x13 cm, 13x20 cm, 102x181mm Y Y LCD 120 sheets N Y 29 cpm 29 cpm Y 1200 x 2400 DPI Y 300dpi 2.2msec/line, 600dpi 7.2msec/line 300dpi 7.2msec/line, 600dpi 13.1msec/line Flatbed scanner Epson Micro Piezo 4 pcs Inkjet
Certificates Energy Star certified Storage media Y

Compatible memory cards

CF, MicroDrive, Memory Stick, MagicGate Memory Stick, Memory Stick PRO, SD, SDHC, MMC, xD Picture , xD-Picture Type-M, xD-Picture Type-H
Price correct as at Wednesday, November 03, 2010 4:31 PM. Please check the website for the latest price.