EPSON Stylus Photo EX

paper support extension paper support

Accessories

Ink Cartridges

edge guides

printer cover control panel

Cartridge Black Color

Part number S020093 S020110
Media name EPSON 360 dpi Ink Jet Paper EPSON High Quality Ink Jet Paper Size Letter A4 Letter A4 Letter A4 Ledger/B Legal Letter A4 Letter A4 Ledger/B A6 Letter ALedger/B Panoramic (8.3 23.4 inches) Letter A4 A10 A6, 16 frames per sheet (includes software) A6, 16 frames per sheet Letter Letter A4 A3 Part number S041060 S041059 S041111 S041117 S041062 S041061 S041070 S041067 S041124 S041126 S041072 S041071 S041075 S041107 S041141 S041140 S041134 S041156 S041145 S041064 S041063 S041054 S041122 S041144-KIT

output tray

output tray extensions load/eject button power light
EPSON Photo Quality Ink Jet Paper

ink cartridge clamp

paper out thickness light lever
EPSON Photo Quality Glossy Paper EPSON Photo Quality Glossy Film

EPSON Photo Paper

color ink out light black ink out light
power button cleaning button
EPSON Ink Jet Transparencies EPSON Photo Quality Ink Jet Cards EPSON Photo Sticker Kit
EPSON Photo Sticker Refill EPSON Iron-On Cool Peel Transfer Paper EPSON Photo Quality Self Adhesive Sheets EPSON Ink Jet Back Light Film
S041144 S041153 (10 sheets) S041155 (50 sheets) S041106 S041131
EPSON Stylus Photo EX - 1

Ink Cartridge

Specification Color(s) Black ink cartridge (S020093) Black Color ink cartridge (S020110) Cyan, Magenta, Yellow, Light Magenta, Light Cyan 220 pages (A4, 360 dpi, 5% duty each color)

Printer Specifications

Printing
Printing method EPSONs exclusive drop-on-demand Micro Piezo ink jet technology 32 nozzles 32 nozzles 5 (cyan, magenta, yellow, light cyan, light magenta)
Nozzle configuration Black Color
Print capacity* 540 pages/A4 (ISO/IEC 10561 Letter Pattern at 360 dpi) Cartridge life Storage temperature
2 years from production date (if unopened) (within 6 months after opening package, at 77 F (25 C)) Installed: 4 to 104 F (20 to 40 C) 1 month at 104 F (40 C) Uninstalled: 22 to 104 F (30 to 40 C) 1 month at 104 F (40 C) 22 to 140 F (30 to 60 C) 1 month at 104 F (40 C) 120 hours at 140 F (60 C) 1.4 F (17 C) 2.0 (W) 2.1 (D) 1.5 (H) inches 51.4 (W) 52.7 (D) 38.5 (H) mm
Printable columns and printing speeds
Print quality 180 dpi 360 dpi 720 dpi 1440 dpi Printable width 11.46 inches (291 mm) 11.46 inches (291 mm) 11.46 inches (291 mm) 11.46 inches (291 mm) Available dots CR speed 20 ips 20 ips 20 ips 20 ips Transit temperature
Freezing 5 F (15 C) temperature** Dimensions 0.7 (W) 2.1 (D) 1.5 (H) inches 19.8 (W) 52.7 (D) 38.5 (H) mm
dpi = dots per inch, ips = inches per second
Resolution Print direction Control code
Maximum 1440 dpi 720 dpi Bidirectional with logic seeking ESC/P Raster
* The print capacity may vary, depending on how often you clean the print head. ** It thaws and is usable after approximately 3 hours at 77 F (25 C). Caution: EPSON recommends the use of genuine EPSON ink cartridges. Other products not manufactured by EPSON may cause damage to your printer not covered by EPSONs warranties. Do not use an ink cartridge if the date on the package has expired.

2 - EPSON Stylus Photo EX
Paper type Single sheets Size Letter (8.inches) Legal (8.inches) Ledger or B size (inches) Statement (5.5 8.5 inches) Executive (7.inches) A3 (mm) A4 (mm) A5 (mm) B4 (mm) B5 (mm) Letter (8.inches) A4 (mm) A6 (mm), glossy film only Photo paper (inches) A4 (mm) No. 10: 9.5 4.1 inches (mm) DL: 8.7 4.3 inches (mm) C6: 4.4 6.4 inches (mm) A6 (mm) inches (mm) Letter (8.inches) A4 (mm) Ledger or B size (inches) inches (mm) Panoramic (mm) A6 (mm) 16 frames per sheet Paper types Plain bond paper and special ink jet papers distributed by EPSON Thickness 0.003 to 0.004 inch (0.08 to 0.11 mm) for plain bond paper Weight 17 to 24 lb (64 to 90 g/m2) for plain bond paper
Transparencies, Glossy film, Glossy paper
Transparencies, glossy paper, and glossy film distributed by EPSON Self adhesive sheets distributed by EPSON Plain bond paper or air mail paper
Adhesive sheets Envelopes
0.006 to 0.017 inch (0.16 to 0.43 mm)
12 to 20 lb (45 to 75 g/m2)
Index (ink jet) cards Photo paper
Ink jet cards distributed by EPSON Photo paper distributed by EPSON

Photo stickers

Photo stickers distributed by EPSON Transfer paper distributed by EPSON Ink jet back light film distributed by EPSON
Iron-on cool peel transfer paper Letter (8.inches) A4 (mm) Ink jet back light film A3 (mm)
Note: Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON cannot attest to the quality of any non-EPSON brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs. Poor quality paper may reduce print quality and cause paper jams and other problems. If you encounter problems, switch to a higher grade of paper. Do not load curled or folded paper. Use special papers distributed by EPSON under these conditions: Temperature: 59 to 77 F (15 to 25 C) Humidity: 40 to 60% RH Store printouts on EPSON glossy media and self adhesive sheets under these conditions: Temperature: 59 to 86 F (15 to 30 C) Humidity: 20 to 60% RH
EPSON Stylus Photo EX - 3

Printable area

A B-L B-L B-R EPSON Panoramic Photo Paper A: The minimum top margin is 0.12 inch (3.0 mm). B-L, The minimum left margin is 0.12 inch (3.0 mm). B-R: The minimum right margin is 0.54 inch (14.0 mm). C: The minimum bottom margin is 0.12 inch (3.0 mm). Note: Always load paper into the sheet feeder short edge first. However, envelopes should be loaded long edge first. B-R C envelope A: The minimum top margin is 0.12 inch (3.0 mm). When loading multiple sheets of EPSON Photo Quality Film, the minimum top margin is 1.2 inches (30 mm). B-R C

C single sheet

Mechanical
Paper feed method Paper path Sheet feeder capacity Dimensions Storage Width: 21.5 inches (546 mm) Depth: 10.8 inches (275 mm) Height: 6.8 inches (172 mm) Width: 21.5 inches (546 mm) Depth: 31.0 inches (788 mm) Height: 13.9 inches (353 mm) Friction Rear entry sheet feeder 100 sheets of 17 lb (64 g/m2) paper
B-L, B-R: The minimum left and right margins are 0.12 inch (3.0 mm). The minimum right margin for envelopes is as follows: 0.28 inch (7 mm) for DL envelopes. 1.10 inches (28 mm) for No. 10 envelopes. 0.12 inch (3 mm) for C6 envelopes. C: The minimum bottom margin is 0.54 inch (14.0 mm). A
Printing (maximum dimensions)

B-L, B-R

Weight
15.4 lb (7 kg) without the ink cartridges
C EPSON 4 6-inch Photo Paper (dotted lines indicate perforations) A: BL, BR: C: The maximum top margin is 0.67 inch (17.0 mm). The maximum left and right margin is 0.24 inch (6.1 mm). The maximum bottom margin is 0.24 inch (6.1 mm).
4 - EPSON Stylus Photo EX

Electrical

Specification Input voltage range** Rated frequency range Input frequency range Rated current Power consumption 0.4 A 120 V Model 99 to 132 V 220240 V Model* 198 to 264 V 50 to 60 Hz 49.5 to 60.5 Hz 0.2 A

Hardware initialization

When the printer is turned on, the printer mechanism is initialized and the input data buffer and print buffer are cleared. Printer settings are returned to their default values. However, the printer mechanism is not initialized if the printer is turned on within ten seconds after turning it off. In this case, the printer caps the print head, and ejects any paper in the paper path.

Software initialization

Approx. 15 W (ISO/IEC 10561 Letter Pattern) Approx. 5 W in standby mode (120 V model) Approx. 5.5 W in standby mode (220240 V model)
This clears the print buffer and returns printer settings to their default values. However, it does not initialize the printer mechanism or clear the data buffer.
* This product is also designed for an IT power system phase-tophase voltage of 220240 V. ** Check the label on the back of the printer for the voltage of your printer.

Interface

Your printer is equipped with an 8-bit parallel interface and a serial interface.

Parallel interface

Environmental
Temperature Operation Storage* 50 to 95 F (10 to 35 C) to 140 F (20 to 60 C) 1 month at 104 F (40 C) 120 hours at 140 F (60 C) 20 to 80% RH 5 to 85% RH

The built-in parallel interface has the following characteristics: Forward channel Data format: Synchronization: Handshake timing: Signal level: Connector: Reverse channel 8-bit parallel, IEEE-1284 compatibility mode STROBE pulse BUSY and ACKNLG signals TTL compatible 57-30360 Amphenol connector or equivalent
Humidity (without condensation) Operation Storage*
*Stored in shipping container

Safety approvals

Safety standards EMC UL 1950 with D3, CSA C22.2 No. 950 with D3 FCC part 15 subpart B class B, CSA C108.8 class B
Transmission mode: Adaptable connector: Synchronization: Handshaking: Signal level:
IEEE-1284 Nibble mode 57-30360 Amphenol connector or equivalent Refer to the IEEE-1284 specification Refer to the IEEE-1284 specification IEEE-1284 Level 1 device

Initialization

The printer can be initialized (returned to a fixed set of conditions) in these ways:
Hardware initialization Software initialization The printer is turned on. The printer receives an INIT signal from the parallel interface. Software sends an ESC @ (initialize the printer) command.
Data transmission timing: Refer to the IEEE-1284 specification

Serial interface

The printers built-in serial interface is based on the RS-423 standard. This interface has the following characteristics: Standard: Synchronization: Based on RS-423 Synchronous
EPSON Stylus Photo EX - 5
Bit rate: Handshaking: Word format: Approx. 900Kbps X-ON/X-OFF and DTR protocol Data bit: 8 bits Parity bit: None Start bit: 1 bit Stop bit: 1 bit 8-pin mini-DIN PSBA
When the power and paper out lights flash and the ink out lights are on, your printer has a carriage error. Turn off the printer by pressing the P power button; wait several seconds; then turn it on again. If this does not clear the error condition, contact EPSON as described in the Users Guide. When all the lights flash, your printer may have an internal error. Turn off the printer by pressing the P power button; wait several seconds; then turn it on again. If this does not clear the error condition, contact EPSON as described in the Users Guide.

Connector

Recommended cable: Apple System Peripheral-8 cable (part number M0197)

Control Panel

paper out light load/eject button power light
Installing an Ink Cartridge in a New Printer
1. Plug the power cord into a grounded outlet.
black ink out light color ink out light cleaning button
2. Make sure the power is off (the P power light is off).
Caution: Dont use an outlet controlled by a wall switch or timer, or one that uses the same circuit as a large appliance. This may disrupt the power, which can erase memory or even damage the power supply.

power button

3. Lower the output tray and open the printer cover.
The four lights on your printers control panel show the printers status and alert you to problems like paper jams. S When the paper out light comes on, your paper ran out or is incorrectly loaded. Load paper in the sheet feeder and then press the E load/eject button. When the paper out light flashes, you have a paper jam. Take all of the paper out of the sheet feeder, reload the paper, then press the E load/eject button. If the light continues to flash, turn off the printer and gently pull out any jammed paper. When an ink out light flashes, your ink supply is low. Make sure you have a replacement cartridge. When an ink out light comes on, you need to replace the ink cartridge. The power light is on when the printer is on. The power light flashes when the printer is receiving a print job or performing a maintenance operation such as cleaning the print head.

printer cover

power button output tray

B or A

B or A P
4. Press the P power button to turn on the printer. The P power light flashes, the B and A ink out lights come on, and the ink cartridge holders move left to the installation position.
Caution: Always use the P power button to turn the printer on or off. Never use an external switchsuch as a power stripto turn off the printer.
6 - EPSON Stylus Photo EX
5. Pull up the two ink cartridge clamps. (The illustration shows the color ink cartridge clamp.)
Caution: Never turn off the printer when the P power light is flashing. But if the light is still flashing after five minutes and the printer isnt moving or making noise, you may turn off the printer.

Testing the Printer

You can run a printer check to determine whether a problem comes from the printer itself or some other source. t If the results are satisfactory, the problem lies in software settings, the interface cable, or your computer. 6. Remove the ink cartridges from their foil packages. Then remove only the yellow part of the tape seal on the top of each cartridge. Do not remove the white part.

Caution: You must remove the yellow tape seal from the top of the cartridge or you will permanently damage it. Its OK if the tape does not exactly tear off along the dotted line. Dont remove the tape seal from the bottom. dont remove dont remove remove
t If the printer check does not print correctly, there is a problem with your printer. Follow these steps to check the printer: 1. Make sure both the printer and computer are turned off. 2. Disconnect the interface cable from the printer. 3. Make sure paper is loaded in the printer. 4. Hold down the E load/eject button and press the Ppower button. Hold down the buttons until the Ppower light starts to flash. Then release both buttons. The printer prints one page containing the printers ROM version, ink counter code, character table number, and a nozzle check pattern. Only the nozzle check pattern is shown below:

remove

black ink cartridge

color ink cartridge

Warning: If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them immediately with water.
7. Insert the ink cartridges into their holders. Be sure the labels are face up and the arrows point toward the back of the printer. The black ink cartridge goes on the left and the color ink cartridge goes on the right. 8. Push down the clamps until they lock in place. 9. Press the R cleaning button and close the printer cover. The printer moves the print head and begins charging the ink delivery system. Charging can take up to two minutes. During this time, the P power light flashes, and the printer makes various sounds. Dont turn off the printer or interrupt the charging process or youll use more ink than necessary. Charging is complete when the P power light stops flashing and is continually lit.
5. After it prints the page, turn off the printer. Remember to reconnect the interface cable, then turn on the printer and your computer.
EPSON Stylus Photo EX - 7
Printing on Special Media
When you print on special media, you need to be careful about choosing the correct Media Type and Paper Size settings in your printer software. The following table lists the available EPSON media and the corresponding Media Type setting to select in your printer software.
Then select this Media Type setting in your printer software. Plain paper For this media name. EPSON Photo Quality Glossy Film2 EPSON Photo Stickers EPSON High Quality Glossy Paper EPSON Ink Jet Transparencies EPSON Ink Jet Back Light Film
Load a maximum of this many sheets. 30 (use a 1.2 inch top margin and a support sheet) 1 (use a support sheet) 30 (use a support sheet) 10 (use a support sheet) 1

Then select this Media Type setting in your printer software. Photo Quality Glossy Film
For this media name. Plain paper, letter size Plain paper, legal size Envelopes
Load a maximum of this many sheets. 100 (load preprinted forms top edge first) 100 (pull up the paper support extension) 10 (set the thickness lever to the + position, load flap edge first and printable side up) letter size 30 legal size
Ink Jet Transparencies Ink Jet Back Light Film
Use the Flip Horizontal option to reverse your image before you print itespecially if it includes textso the image will appear correctly when its transferred. For better results, load EPSON Photo Quality Glossy Film one sheet at a time. This also allows you to use a smaller top margin.
Labels (single sheets) EPSON 360 dpi Ink Jet Paper EPSON Special Coated Paper for 360 dpi Printing EPSON Iron-On Cool Peel Transfer Paper1 EPSON High Quality Ink Jet Paper EPSON Photo Quality Ink Jet Paper EPSON Special Coated Paper for 720 dpi Printing EPSON Photo Quality Ink Jet Cards EPSON Special Coated Index Cards for 720 dpi Printing EPSON Photo Quality Self Adhesive Sheets EPSON Photo Quality Glossy Paper EPSON Photo Paper EPSON Panoramic Photo Paper

360 dpi Ink Jet Paper

Additional Media Loading Guidelines
Caution: Dont use the cleaning sheets that may be included with your special media; they may damage the printer.
1 sheet 70 letter size 30 legal size Photo Quality Ink Jet Paper
t If the corresponding Media Type option for your paper is not shown in the Media Type list, change the Print Quality setting in the More Settings dialog box, select Automatic as the Mode setting, or change the predefined setting in the Custom Settings list in the printer settings dialog box. Then select the correct media type. t Some special media have a cut corner that you need to position correctly; follow any instructions in the package. Always handle sheets by the edges, and dont touch the printable surface.

cut corner

30 cards (use a support sheet)
(use a support sheet) 20 (use a support sheet) 1 Photo Paper
t If the special media has protective sheets between each sheet of media, be sure to remove the protective sheets before printing. Load the printable side of the media face up in the sheet feeder.
8 - EPSON Stylus Photo EX
Warning: If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water.
Replacing an Ink Cartridge
Caution: To ensure good results, use genuine EPSON cartridges and do not refill them. Other products may cause damage to your printer not covered by EPSONs warranty.
Installing the New Cartridge
Once you have removed the empty cartridge, youre ready to install the new one. Follow these steps: 1. Remove the new ink cartridge from its packaging.
Caution: You must remove the yellow tape seal from the top of the cartridge; leaving the tape on will permanently damage it. Do not remove the clear seal from the bottom of the cartridge; ink will leak out.

When a B black or A color ink out light flashes, the indicated cartridge is low on ink. This is a good time to make sure you have a new cartridge. When the light stays on, the cartridge is empty and you need to replace it. You cannot print if either ink cartridge is empty. Use these EPSON ink cartridges within six months of installing them and before the expiration date on the package: t Black ink cartridge: S020093 t Color ink cartridge: S020110
2. Remove only the yellow part of the tape seal on the top of the cartridge. Do not remove the white part. (Its OK if the tape does not exactly tear off along the dotted line.)
dont remove dont remove remove remove
Removing an Empty Ink Cartridge
You can replace a cartridge when the B black or A color ink out light is either flashing or on. Follow these steps: 1. Make sure the printer is turned on and not printing. 2. Determine which cartridge needs to be replaced. 3. Lower the output tray and raise the printer cover.
Note: If you press the R cleaning button when neither ink out light is flashing or on, the printer cleans the print head as described on page 10. If you need to replace an ink cartridge before the lights flash (because the ink is too old, for example) follow the instructions in Replacing an Outdated Ink Cartridge.
3. Lower the ink cartridge into its holder with the label facing up and the arrow pointing to the back of the printer. The larger cartridge (color) goes on the right, the black ink cartridge on the left. 4. Press down the ink cartridge clamp until it locks in place. 5. If you need to replace the other ink cartridge, remove it as described in Removing an Empty Ink Cartridge. Then follow steps 1 through 4 in this section. 6. Press the R cleaning button and close the printer cover. The printer moves the print head and begins charging the ink delivery system. (Even if you dont press the button, ink charging begins 60 seconds after you close the clamp.) The Ppower light flashes and the printer makes various sounds. Charging takes about two minutes. When its finished, you can print again.
Caution: Never turn off the printer while the P power light is flashing, unless the printer hasnt moved or made any noise for more than 5 minutes.
4. Press the R cleaning button and hold it for three seconds. The print head moves all the way to the left and the P power light begins flashing. (The print head returns to its home position if you dont proceed to step 5 within 60 seconds.) 5. Pull up the ink cartridge clamp. The cartridge rises up from its holder.

Caution: Dont open the clamp or remove a cartridge except to replace it with a new one. Once you remove a cartridge, you cant reuse it. Even if the cartridge contains ink, reusing it may damage the print head.
6. Lift the cartridge out of the printer and dispose of it carefully. 7. Follow the steps in the next section to install the new ink cartridge.
EPSON Stylus Photo EX - 9
Replacing an Outdated Ink Cartridge
If an ink cartridge is more than six months old, you may need to replace it. How can you tell? You may notice that your printouts dont look as good as they used to. If print quality doesnt improve after cleaning and aligning the print head, you may need to replace one or both cartridges. Follow these steps to replace an ink cartridge before the B black or A color ink out light is flashing or on: 1. Make sure the printer is turned on and not printing. 2. Lower the output tray and raise the printer cover. 3. Press the E load/eject button and hold it down for a few seconds until the print head moves to the left. (The printer automatically moves the print head back to the home position after 60 seconds if you dont continue with step 4.)
Caution: To avoid damaging the printer, never move the print head by hand.
Using the Head Cleaning Utility
Follow these steps to run the utility: 1. Make sure the printer is turned on but not printing, and the B black and A color ink out lights are off. 2. Access the printer settings dialog box. 3. Click the Utility tab (Windows) or the Utility button (Macintosh). You see the Utility menu. 4. Click the Head Cleaning button. 5. Follow the instructions on the screen to clean the print head. Cleaning takes about two minutes, during which the printer makes some noise and the P power light flashes.
4. Pull up the ink cartridge clamp. The cartridge rises up from its holder. 5. Lift the cartridge out of the printer and dispose of it carefully. 6. Follow the steps in the previous section, Installing the New Cartridge, to install the new ink cartridge.
When the Ppower light stops flashing, you need to run a nozzle check to confirm that the print head is clean and to reset the printers cleaning cycle. 6. Make sure paper is loaded in the printer and click Print nozzle check pattern (Windows) or Confirmation (Macintosh). Then click Next. See Examining the Nozzle Check Pattern for further instructions. If your print quality has not improved, repeat the steps above.

Cleaning the Print Head

If your printed image is unexpectedly light or faint, or dots are missing from the image, you may need to clean the print head. This unclogs the nozzles so they can deliver ink properly. Cleaning the print head uses ink, so clean it only if print quality declines. You can use either of the following to clean the print head: t The Head Cleaning utility (recommended) in your printer software (if the printer is on a local port rather than a network) t The printers control panel buttons.

Using the Control Panel

Follow these steps to clean the print head: 1. Make sure the printer is turned on and not printing, and that the B black and A color ink out lights are off. 2. Press the R cleaning button and hold it for three seconds. Cleaning takes about two minutes, during which the printer makes some noise and the Ppower light flashes.
After the cleaning cycle is complete and the Ppower light stops flashing, you need to run a nozzle check to confirm that the print head is clean and to reset the printers cleaning cycle. 3. Access the printer settings dialog box. 4. Click the Utility tab (Windows) or the Utility button (Macintosh). You see the Utility menu. 5. Click the Nozzle Check button. Then click Next. See the next section for instructions on examining the nozzle check pattern. If your print quality has not improved, repeat the steps above.
10 - EPSON Stylus Photo EX
Examining the Nozzle Check Pattern
Examine the nozzle check pattern after printing it. It should look something like this, with each of the six sections showing one of the ink colors: 3. Clean the exterior of the printer with a soft, damp cloth. Keep the printer cover closed so water doesnt get inside. 4. Clean ink out of the printers interior with a damp cloth.
Each staggered horizontal and straight vertical line should be complete, with no gaps in the dot pattern. If your printout looks OK, youre done. If any dots are missing, as shown below, clean the print head again, as explained in the previous sections.

missing dots

Transporting the Printer
If you want to move your printer some distance, you need to prepare it for transportation and repack it in the original box.
Caution: To avoid damage, always leave the ink cartridges installed when transporting the printer.

Follow these steps:

Aligning the Print Head
If your printouts contain misaligned vertical lines, you may need to align the print head. Follow these steps: 1. Make sure the printer is turned on and paper is loaded. 2. Access the printer settings dialog box. 3. Click the Utility tab (Windows) or the Utility button (Macintosh). You see the Utility menu. 4. Click the Print Head Alignment button. 5. Follow the instructions on the screen to print a test page and select the correct alignment.

Note: For best results, use EPSON ink jet paper or photo quality paper when you check the print head alignment.
1. Turn on the printer and wait until the print head locks in the far right position. Then turn off the printer. 2. Unplug the power cord from the electrical outlet. Then disconnect the interface cable from the printer. 3. Remove any paper from the sheet feeder and remove the paper support. 4. Push in the output tray extensions and close the tray. 5. Repack the printer and attachments in the original box using the protective materials that came with it. See the Notice Sheet that was packed with the printer. Be sure to keep the printer flat as you transport it. If you notice a decline in print quality after transporting the printer, clean the print head; if output is misaligned, align the print head.
Related Documentation Cleaning the Printer
Caution: Dont touch the gears inside the printer. Never use alcohol or thinner for cleaning; they can damage the printer components and case. Dont get water on the printer components. Dont spray lubricants or oils inside the printer.
TM-SP700AD PL-PHOTOEX CPD-6296 CPD-6300
EPSON Stylus Photo EX Service Manual EPSON Stylus Photo EX Parts Price List EPSON Stylus Photo EX Users Guide EPSON Stylus Photo EX Getting Started guide
To keep your printer working at its best, you should clean it several times a year, following these steps: 1. Turn off the printer, unplug the power cord, and disconnect the printer cable. 2. Remove all the paper from the sheet feeder.
EPSON Stylus Photo EX - 11
12 - EPSON Stylus Photo EX