HP df800 Series

Digital Picture Frame Cadre Photo Numrique Marco de Fotos Digital
User Manual Manuel de lutilisateur Manual del Usuario

Revision 1.0a

FCC Compliance Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, (example use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Whats in the Box

Qty Item Image

Engl ish

Digital Picture Frame

Additional Frames

Remote Control

Universal Power Adapter

(9V, 1.5A, 100/240 switching)

USB 2.0 Cable

Warranty Document

User Manual

Remote Controller Holder

Getting Started

1. Connect the power cord into the DC input of the digital picture frame and plug the adapter into a power outlet.

English

2. Unfold the attached stand to its extended position and push the POWER button on the top of the digital picture frame. 3. Insert a memory card or USB storage device (external memory) containing desired photos, music, and/or video into the appropriate card slot or USB port as illustrated below. Note: Memory cards and USB storage devices must be orientated correctly. Generally, labels on these cards or USB devices must be facing outward as illustrated below. 4. A slide show for your photos will automatically begin in a few seconds. If music tracks are available on the same external memory device, the slide show will be displayed with background music unless disabled in Settings. Enjoy it and have fun!
MENU: Press to access menu mode.
ZOOM: Press to enlarge picture in browse mode. UP: Press to move up in thumbnail mode or when setting options. PREV or RETURN: Press to move left in browse, thumbnail or menu mode, or return to previous screen in slide show mode. PLAY/PAUSE or MODE: Press to change display mode (slide show, browse, or thumbnail). Press to play or pause music or video files. Press to make selections in menu or settings mode. NEXT: Press to move right in browse, thumbnail or menu mode. DOWN: Press to move down in thumbnail mode or when setting options. VOL + / - : Press the + button to increase and the button to decrease audible playback volume. COPY/DEL: Press this button in Browse, thumbnail, or MUSIC mode to initiate the copy or delete process. ROTATE: Press to rotate the picture during browse mode.
SLIDESHOW: Press this button to begin a photo slideshow. Timer: Press this button to view calendar and press again to view the clock mode. SETUP: Press this button to open the setup menu.

Picture Frame

Top View: Power and Transport
Power button & LED PLAY/PAUSE/MODE button MENU button UP button DOWN button PREV button NEXT button
Left Side View: USB Port and Mini USB Port for PC Connect

Mini USB Slot

USB Slot
Right Side View: External Memory Slots

Power Input

CF Card Slot

SD/MMC/xD/MS Card Slot

Rear View: Remote Controller Holder

Key Features

Features
Add or delete photos from external memory devices, and internal memory. Photo slide show with music 9 different photo transition options. Shuffle mode optional. Photo slide show without music 9 different photo transition options. Shuffle mode optional. Photos/Images View individual photos in Browse mode (see later section). View Photo thumbnails. Photo zoom and rotate. Playback music/audio tracks Music tracks must be in an mp3 file format Playback video clips Video clips must be in an Motion JPEG (.avi and.mov) file format. Clock and Calendar Includes alarm clock functionality
Basic Brightness and Contrast adjustment controls
Basic Color and Tint adjustment controls
7 on screen display languages English, French, Spanish, Italian, German, Dutch, & Portuguese

Initial Setup

1. Pull tab from remote control to activate.
2. Power on the picture frame and press SETUP button.
3. Press the directional arrows to highlight LANGUAGE. Note: If desired language is already selected, go to step 5.

4. Press

button and use the directional arrow buttons to highlight to select the
the desired On-Screen-Display language. Press language.
5. Change other settings by using the directional keys to highlight the desired option and press to select the desired option.
IMAGE SIZE: Select ORIGINAL to display photos with their original properties. Display photo in full height in normal aspect ratios. Select OPTIMAL to allow the frame to display photos with optimized properties. Photo(s) will enlarge to fit the full width of the screen.
The default option is ORIGINAL. SLIDE TRANSITION: Choose from 9 options and select the desired transition. The default option is set to RANDOM. SLIDE SHOW SPEED: Select the desired photo display length. Options are: 5, 10, 30, 60 SECONDS, I HOUR, and 24 HOURS. The default option is 5 SECONDS. SLIDE SHOW SHUFFLE: Select ON to display photos in a random order. Photos will not repeat until all have been displayed. Select OFF to display photos in sequential order. The default option is set to OFF. RESET SETTINGS: Select this to restore all options to factory default settings. A confirmation prompt will be displayed before settings are reset. LANGUAGE: Select this to choose the desired screen language option. The default is ENGLISH. BRIGHTNESS/CONTRAST: Select this option to change the displays brightness and contrast properties. Use the the & & buttons to change the display contrast. Use buttons to change the display brightness.

COLOR/TINT: Select this option to change the displays color and tint properties. Use the & & buttons to change the display color. Use the
buttons to change the display tint.
BACKGROUND MUSIC: Turn background music on or off during the slide show. Note: Only mp3 file formats are supported for playback. TIME OPTION: Select 12H for standard AM and PM time display. Select 24H for a 24 hour clock display.
Photo/Music/Video Content Management
The HP Digital Picture Frame can play back content from internal and external memory devices such as USB Flash drives and memory cards typically used with digital cameras. More than one external memory device can be inserted; however, content from one memory source can be selected for playback at any given time. To select the desired memory source, press the button TWICE and use the arrow keys to select this
to highlight the appropriate memory icon. Press the content source. Example illustrated below:
or There are two methods on how to get content in the internal memory. From external memory device: Insert external memory device with desired content into the appropriate connector. A slide show will automatically begin. Press the the slide show. Use the & button to stop
buttons to navigate to the
desired photo. Press the button to start the copy process. Follow the on screen prompts as illustrated below to copy the photo onto the frames internal memory. Repeat for each desired photo/image. NOTE: Only one photo/picture can be copied (or deleted) at a time from or to external memory devices.
To copy audio files, press the

button. Use the arrow

buttons to navigate to the icon and press the button. Select the desired audio file and repeat the copy process as previously illustrated. If desired, content can be copied onto external memory devices from the internal memory. Select the internal memory source and repeat the copy process but select the desired external memory device as the memory destination location.
From a PC/notebook: For the first connection, it is recommended to remove all external memory sources. Power on the HP Digital Picture Frame and connect the HP Digital Picture Frame to your Windows 2000 (with service pack 4 or greater), Windows XP (with Service Pack 2 or greater), or Windows Vista PC/notebook by using the USB cable provide with product (see illustration below):
3 new drive letters will appear in Windows Explorer. These new drive letters represent the Digital Picture Frames internal memory, Memory card slot 1 and Memory card slot 2. The digital picture frame will display the graphic below:

1 of the 3 new drive letters is the HP Digital Picture Frames internal memory and will be labeled HP df800. Drive letter assignment MAY vary from PC to PC. Use standard Windows copy and paste procedures to move content onto the frames internal memory. To check the picture frame's available memory, right click on the internal memory drive letter and select Properties. A properties menu will appear displaying the available/Free space (in Mega Bytes[MB]). Disconnect the PC/notebook when desired content has been copied successfully. 12
Removing content from memory: Content can be removed/ deleted from internal and external memory in the same manner as it was added. Select the desired photo/music file to be deleted and press the button. Use the arrow button to
highlight the DELETE button icon and press the this action as illustrated below:

to confirm

Follow the on screen menus to complete the task. Repeat the process for each file to be deleted.

Photo/Picture Slide Show

Slide show modes Slide show mode will begin automatically a few seconds after the frame is powered on or when an external memory card/USB Flash drive is inserted. There are two slide show modes, one with background music and the other without. Review the Initial Setup section of this document for details on how to change desired settings. Browse mode
To exit slideshow mode, press once. Browse mode will be displayed on the lower right section of the screen for a few seconds. This allows forward and previous photo viewing as well as a copy/delete, rotate, and zoom options. Thumbnail mode
To view photos/pictures in thumbnail mode, press the in slideshow mode or once when in browse mode.

twice when

Music Playback
Press to access the menu screen.
Use the directional arrows to select the icon then press. The frame will display a list of music/audio files found on the selected memory source as illustrated below.
The first music track in the list will begin to play. The default playback mode is to play from first to last track then repeat from the first track. Supported audio format: MP3

Video Playback

Press the button to access the menu screen of the frame.
Use the directional arrows to select the confirm.

icon then press

The frame will display a list of supported video clips/files found on the selected memory source as illustrated below.

Press the

buttons to select a desired video clip. Press
to start playback. The default playback mode will automatically play the next video clip until the end of the list, and then start over from the beginning. Supported Video format: Motion JPEG (.avi and.mov)

Calendar

Use the directional buttons to select the icon then press. The frame will display the calendar screen similar to the illustration below.
The calendar will display the current date. To adjust the date, review the next section titled Clock Setup and Viewing. Use the Use the month. & & buttons to view the previous or next month(s). buttons to highlight the different days in the

Clock Setup and Viewing

Use the directional buttons to select the icon then press The frame will display the Clock screen as illustrated below.
To change the clock time and alarm settings, press the and the hour number will begin to flash.

button

Use the Use the Press

& &

buttons to change the clock option settings. buttons to move between the clock options.
when desired date, time, and alarm settings are selected.
NOTE: The HP df800 Digital Picture Frame has a Real Time Clock (RTC) battery backup that allows the clock to maintain correct date and time when powered off. It is important that the df800 remains powered up for at least 6 hours to achieve a full charge. Once fully charged, the battery backup will allow the df800 to be powered down up to 36 hours. If the df800 is powered off for more than the battery limits, the date and time will need to be reconfigured. 18

Specifications

Panel Specification
8 4:3 800x600 pixels 400:cd/m2 65/65 60/40 +9V, 1.5A Stereo 1 (STD 1.1 Host) 128MB Memory Stick Pro (MS Pro), Secure Digital (SD 2.0), XD Picture Card, & Multi Media Card (MMC) Compact Flash (CF)
Mini B receptacle Standard A receptacle
Aspect ratio Resolution Contrast ratio Brightness Viewing Angle - Horizontal Viewing Angle - Vertical Power External AC Power Adapter Audio Internal speakers Connectivity USB Ports Storage/Media Internal memory Supported Memory cards Memory cards slot 1 Memory cards slot 2 Connectivity USB for link to PC USB for thumb drive Media Files Supported: Video file formats Photo file formats Audio file formats User Interface/Control

Buttons at the Top of digital picture frame Remote control
Motion JPEG (.avi and.mov) JPEG - (Base line only)
Yes Yes English, French, Spanish, Italian, German, Dutch, & Portuguese

Supported Languages

On-Screen Display
Frequently Asked Questions
Question How far away can I use the remote control? Why cant I display some of my Photos? Why cant I play some of my music tracks? Why cant I play some of my video clips? Can I delete photos from external memory cards or flash drives? Can I delete photos from internal memory? Answer Up to 15ft (5m) Some photo/image file formats are not supported. Please refer to the specifications. Some music file formats are not supported. Please refer to the specifications. Some video file formats are not supported. Please refer to the specifications. Yes, refer to the Photo/Music/Video Content Management section of this document. Yes, refer to the Photo/Music/Video Content Management section of this document. Remove all external memory sources or How can I switch to the internal memory? press the button TWICE on the remote and select the internal memory icon. The appropriate USB drivers are not supplied for this product and are NOT native to these operating systems Connecting the frame will only allow access to the memory card slot 1 and no other source. If desired, content from the Apple can be copied onto a slot 1 memory card. Following procedures documented in Photo/Music/Video Content Management section of this document, content could be copied onto the frames internal memory. Note: This WILL NOT be a supported process. I have lost or damaged my remote and/or power adapter. Can I order replacements? How can I find the latest information/FAQs about my HP Digital Picture Frame? Yes. Visit www.hp.com/support for more details. Visit www.hp.com/support for more details and the latest information.
Why cant I use my Windows 98 or Me system to copy content onto the frame?
Why cant I use my Apple system to copy content onto the frame?

Cleaning and Care Tips

Please power off the HP Digital Picture Frame before cleaning. DO NOT spray or pour liquid cleaning agents directly on the screen or frame. DO NOT use ammonia, alcohol, or abrasive detergent cleaning agents. Cleaning the Screen: 1. Wipe screen with a clean, soft, lint-free cloth to remove dust and loose particles. 2. If further cleaning is required, apply an appropriate cleaning agent (approved for LCD displays) to a clean, soft, lint-free cloth and wipe the screen. NOTE: do not apply too much pressure on the screen to avoid damaging it. Cleaning the Frame and Backing: 1. Use a clean, soft, lint-free cloth to remove dust and loose particles. 2. If desired, apply an appropriate cleaning agent to a clean, soft, lint-free cloth and wipe the appropriate surfaces.