*C8380-90169* *C8380-90169*

C8380-90169

hp officejet 7110(xi)/7130(xi) all-in-one

3 1.V 0m A

21 English Espaol Franais Deutsch Portugus Nederlands Italiano Dansk Suomi Norsk Svenska

a b c d e

Hewlett-Packard Company 2002

www.hp.com/support

TOP INSTRUCTIONS to Perform 4800 Optimized DPI Alignment
To get the best print quality, you should align your print heads using this page. Follow these steps: Step 1. Load the TOP of this page face down on the scanner glass in the front right corner. Step 2. Press Enter on the front panel when prompted. Step 3. "4800 optimized align complete" displays on the front panel when you are done. Please recycle or discard this page.

a b c d

Nordic Information Technology Organisations
Association of the Swedish IT and Telecom Industry www.sito.se Sweden Norwegian IT-companies Organisation www.ikt-norge.no Norway IT-Brancheforeningen Kontor & Data www.itb.dk Denmark

ECO Declaration

Information Technology (IT) Products

July 2000

This declaration covers the following product(s) with specified product identity (ID), type/model numbers: Each marked product category must be identified below Computer system CRT display/ LCD display/ Keyboard Mobile/portable unit (CPU) monitor monitor computer Server Copier* Laser printer* Inkjet printer* Matrix printer* Fax* Scanner* Multifunction product*, specify: InkJet - Print/Fax/Scan/Copy Other product, specify: *) pages per minute: bl/w: 22 colour: 18 Model/type/sales name: C8390A, C8392/ InkJet/HP/ OfficeJet 7110, OfficeJet 7110xi Please use separate ECO declarations for telecommunication equipment.

Brand Manufacturer

Hewlett Packard
Manufacturers representative

Contact person

Hal Phillips, HP San Diego, CA USA

Postal address

Hans Wenschlag

Postal code City

Skalholtsgatan 9

Telephone

164 97
Mobile phone E-mail/Internet site

+544 2072

+hans_wendschlag@hp.com

+444 2266

Additional information
CONDITIONS FOR DECLARATION USE
(excerpts from the contract text, for full text, see the ECO Declaration Guideline): Any company wishing to use this declaration must meet the following requirements: - sign a contract with one or more of the Nordic IT Organisations and pay the service fee - state compliance to the specific requirements, only if this can be verified via certificates, test reports or signed documents - the declaration must be completed in accordance with the instructions given in the "ECO Declaration Guideline". - respond to all obligatory requirements marked with an "O" (response required), "O()" (response required by law) applicable to the declared product category, ("V" = voluntary information); - in case of incorrect information, immediately correct the issued declarations and notify customers - on request notify the Nordic IT Organisations of how many declarations have been issued This version of the ECO declaration shall be used for products announced after July 2000 and can be used for products announced from January 2000.
Version/date: Page 1(4) Model: This Eco declaration for Information Technology (IT) products may only be used after having signed a contract with at least one of the Nordic IT-Organisations, ITB in Denmark, IKT-Norge in Norway or IT-Fretagen in Sweden.
Copyright Association of the Swedish IT and Telecom Industry 2000. Reproduction of this form without permission is prohibited by the copyright law 1960:729. The prohibition includes any kind of reproduction, by electronic or any other means (Version June 2000).

n/a = not applicable

Type of requirement
Requirement fulfilled Yes No n/a

1 1.1 1.2 1.2.1 2.2 2.3

Environmental policy & Environmental management The manufacturer has a documented environmental policy approved by the management. The manufacturer has an environmental management system: certified by ISO 14001, EMAS, other/internal system The manufacturer regularly publishes an environmental report. Environmental conscious design The product is designed for easy disassembly during recycling. Gluing/welding/painting of different materials has been avoided. Large mechanical plastic parts consist of one material or of easy separable materials. All plastic parts, heavier than 25g have material codes according to ISO11469 All plastic parts, heavier than 25g have material codes according to ISO 1043 part 1 part 2 part 3 part 4 not known Chemical specification of flame retardant in plastic parts over 25g: Product cover/housing PBB/PBDE TBBPA Other None Other plastic parts PBB/PBDE TBBPA Other None Printed circuit boards PBB/PBDE TBBPA Other None Product cover/housing material specification Material type PC or Material type PS Material type Electrical cable insulation material specification PVC Other Not known CFCs, HCFCs, asbestos, PCB and PCT are not present in the product. Mercury is not present in the product. Cadmium is not present in plastic materials and CRTs (Cathode Ray Tubes). Lead is not present in mechanical plastic parts heavier than 25g Chloroparaffins with chain length 10-13 C atoms, chlorinated greater than 50% are not present in mechanical plastic parts heavier than 25g. Special tools are not needed to upgrade the product. Processor, memory and cards of various types can be changed/upgraded. Hard disk and/or floppy drive can be changed/upgraded. Batteries Batteries, defined as hazardous in the EU Directive 91/157/EEC are not used in the product. If batteries, defined as hazardous are used in the product these are labelled according to the EU Directive 93/86/EEC. Energy consumption Operation, colour:32.5 W bl/w: 32.5 W Stand by/Idle 21.4 W Low energy state/Sleep mode W Off mode 11.9 W If stand by/idle, reverts to low energy-/sleep-/off mode state in: min. Automatic 2-sided printing/copying from 1-sided originals. Information about the energy save function is given in the user manual. The product meets the requirements of ENERGY STAR. Noise characteristics Sound power level: Operation: LWAd 6.5 B LWA B LWAI B Stand by/Idle: LWAd 3.3 B LWA B LWAI B Sound pressure level, LpAm, LpA: Operation: 51 dB measurement dist. 0,5 m, 1 m, 0,25 m Stand by/Idle: 20 dB measurement dist. 0,5 m, 1 m, 0,25 m

O O O V O O O O O O V O() O O O O O O O Info Info Info Info Info Info Info
2.6 2.7 2.8 2.9 2.10 2.11 2.12 2.13 2.3.1 3.4.1
O O() V O O O V O O O Value Value Value Value Value

4.2 4.3 4.5.1

V V V V

Value Value Value Value

Version/date: Page 2(4) Model: This Eco declaration for Information Technology (IT) products may only be used after having signed a contract with at least one of the Nordic IT-Organisations, ITB in Denmark, IKT-Norge in Norway or IT-Fretagen in Sweden.
6 6.1 6.2 6.3 6.7.1 7.2 7.3 7.8.1 8.2 8.3 8.4 8.5 8.9.1 9.10.1 10.2 10.3
Emissions Copiers, printers, faxes, multifunction products: Dust, measured according to RAL-UZ mg/m3 Ozone, measured according to RAL-UZ mg/m3 Styrene, measured according to RAL-UZ mg/m3 Displays and portable computers: Display/portable computer meets the requirements regarding electromagnetic fields according to: MPR-II , TCO-92/95 , TCO-99 , prEN50279- A , -B , -C Electrical safety, EMC and connection to the telephone network The product meets the Low Voltage Directive (LVD) regarding electrical safety. The product meets the EMC Directive regarding electromagnetic compatibility. If the product is connected to a public telecom network, it must meet the requirements of 1999/5/EC directive. The product is CE-marked. Consumable materials (copiers, printers, faxes, multifunction products) The photo conductor (drum, belt etc.) does not contain cadmium. The photo conductor does not contain selenium. If the photo conductor contains selenium there is a system for waste recovery. Toner/ink (or corresponding) is classified and if required labelled in accordance with EU Directive. Ink does not contain cadmium. Paper containing recycled fibres and meeting the requirements of ENV 12281:1996, can be used in the product. Ergonomics The computer system meets the ergonomic requirements of EN 29241-3, -7, -8. The product keyboard meets the requirements of ISO 9995 and EN 29241-4. Packaging and documentation The product package material does not contain heavy metals according to 94/62/EC. The product package material does not contain CFC/HCFC. Product packaging: Material type: Cardboard weight: 1.665 kg Material type: PE weight:.105 kg Material type: PS weight:.358 kg Material type: other plastic weight:.014 kg The company participates in/ has its own system for collection and recycling of packaging material. Plastic packaging material is marked acc. to DIN6120, ISO11469 or ISO1043-1 to 4. User and product documentation is printed on non chlorine bleached paper. Recycling The company has a system for reuse/ recycling of the product. Information about the system according to 11.1 can be found in the user manual or as specified under item 12 below. Additional information The scanner lamp contains <2mg of mercury A small "Li" button battery is used in this product. Panasonic # CR2032

Value Value Value

O O() O() O() O() O() O O O() O() V O O O() O O O O O O() V V O O
10.4 10.5 10.11.1 11.2.8 3.1

HP P/N 1420-0356

Version/date: Page 3(4) Model: This Eco declaration for Information Technology (IT) products may only be used after having signed a contract with at least one of the Nordic IT-Organisations, ITB in Denmark, IKT-Norge in Norway or IT-Fretagen in Sweden.
C o m m e n t s a n d e x p l a n a t i o n s : For complete comments, explanations, terms and conditions, please refer to ECO Declaration Guideline at each IT Association home page: www.sito.se/itmiljodeklaration - www.ikt-norge.no - www.itb.dk
2 Environmental conscious design
2.1 Some examples of environmental conscious design: PCBs are not enamelled Plastic fittings are not painted or metal-coated Metal fitting, cables and PCBs are not plasticised Batteries are not installed (soldered) directly on the PCB Product labelling does not impede recycling 2.4 These flame retardants are:
- decabrombiphenyl - pentabromdiphenyleter - octabromodiphenyleter - decabromodiphenyleter
CAS no 13654-09-6 CAS no 32534-81-9 CAS no 32536-52-0 CAS no 1163-19-5
SE: Has announced to notify the EU to prohibit the above CAS numbers. Most common is TBBPA (Tetrabromobisphenol A). Applies to all IT products with printed circuit boards. Does not apply to the components on the board. 2.7-2.11 Refers to substance levels which do not exceed natural background levels. 2.7 CFC/HCFC: according to SFS 1995:636, EU-Directive 3093/94/EEC group I, II and VIII and the 1987 Montreal Protocol (September 1997 version). PCB/PCT: according to 1985:837. 2.8 SE: According to SFS 1996:319 mercury is prohibited in relays, level indicators, pressure switches, temperature regulators/ thermostats, electrical switches and contacts for continuos current transmission. Mercury can occur in small amounts in fluorescent tubes and shall after use be treated as hazardous waste. 2.10 SE: The requirement can be found in the Swedish ordinance SFS 1998:944. 2.3, 2.9, 2.10, 2.11 Examples of mechanical plastic parts are product covers/housings and similar construction details.

4 Energy consumption

Displays and portable computers: 6.4 Extensive research has not been able to demonstrate any negative health effects caused by electromagnetic fields from visual displays. EU Directive as well as Nordic national regulation exists, but legally binding hygenic limit values do not exist. Since 1986, the market in Northern Europe has demanded visual displays with reduced electromagnetic fields. According to prEN50279 (which is based on the Swedish standard SS4361490), electromagnetic fields are specified in three categories: PrEN50279 category: A B C Approximately equivalent to TCO-99 MPR-II -the levels according to Category C has no recommended levels for electrostatic and electrical fields, band I. This category is intended for electrical products, insulation class II without protective earth. The standard has a higher level of requirements on the test laboratory. Additionally it contains a section on measuring electromagnetic fields in the office environment and the inaccuracy of such measurements. Observe that that the criteria can normally only be met if the product is connected to a grounded wall outlet. In year 2000, pr EN 50279, is expected to be adopted as a European Norm (EN). Applies to visual stand alone displays and portable computers.

7 Electrical safety, EMC and connection to the telecom. network
The energy consumption is given as a mean value during a typical period of time. 4.1 Nordic recommendations for energy efficient products follow the voluntary US EPA system, called ENERGY STAR. From 199801-01 the NUTEK requirement for displays has been incorporated into the new EPA MOU. For more information, see: www.epa.gov/office.html.
5 Noise characteristics 9
The product shall meet the applicable EU directives: Low Voltage Directive (LVD), 73/23/EEC & 93/68/EEC for electrical safety. EMC Directive, 89/336/EEC, for electromagnetic compatibility. If the product is connected to a public telecom network, the product must meet the Directive 1999/5/EC on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. The CE-mark is the manufacturers confirmation to National authorities that the product meets applicable EU-Directives. On request by the authority the manufacturer must be able to present an EC Declaration of Conformity and/or technical file/test report. The eco-declaration does not replace the EC Declaration of Conformity.

Ergonomics

Sound is measured on a basic machine without accessories (e.g. sorter, document feeder). LWAd = declared A-weighted sound power level rel 1pW. LWA = measured on one product sample. To compare with LWAd, 0.3 B has to be added to compensate the measurement uncertainty. LWAI = including impulsive noise according to RAL-UZ62. Measured on one sample. Not comparable with LWAd or LWA. 1B = 10 dB. Observe! This formula can NOT be used to calculate the sound power level to sound pressure level. Observe! To be able to compare the noise levels from two products, sound power is used. If sound pressure is used, the measurements must be performed according to the same standard, at the same distance and during the same operational conditions.
6 Emissions (Dust, Ozone, VOC)
9.1 EN29241-3 specifies visual ergonomic requirements for computer systems, including operating system and fonts. 9.2 Applies to standard keyboards, does not apply to portable computer keyboards.

10 Packaging and documentation
10.4 SE: The requirements can be found in SFS 1997:185. The company must see to that used packaging is collected and recycled, either by having an own system or be part of an industry system like IT tervinning or a general system, such as the REPA-register.

11 Recycling

Copiers, printers, faxes, multifunction products: 6.1-6.3 RAL-UZ is a German standard used for ECO-labelling of products. Does not apply to inkjet printers.
11.1 SE: The Swedish regulation (SFS 2000:208) on producer responsibility for electric and electronic products is put in force on July 1st 2001. IT-Fretagen already in 1996 established a voluntary system, IT tervinning, that several companies have joined. Other companies have their own systems or contracts with recycling companies. DK: Regulation in force from December 1st 1999. NO: Regulation is enforced July 1st 1999.
Version/date: Page 4(4) Model: This Eco declaration for Information Technology (IT) products may only be used after having signed a contract with at least one of the Nordic IT-Organisations, ITB in Denmark, IKT-Norge in Norway or IT-Fretagen in Sweden.