The HP All-in-One at a glance

Label 13

Description Color graphics display (also referred to as the display) Control panel Output tray (currently shown in the up position) Paper-width guide for the main input tray Main input tray (also referred to as the input tray) Paper tray extender (also referred to as the tray extender) Paper-width and paper-length guides for the photo tray Photo tray Paper-length guide for the main input tray Ink cartridge door Memory card slots Glass Lid backing

Label 3 4

Description Ethernet port USB port Power connection* Rear door
Use only with the power adapter supplied by HP.
Chapter 1 HP All-in-One overview

Control panel features

The following diagram and related table provide a quick reference to the HP All-in-One control panel features.

Label 7

Name and Description Color graphics display (also referred to as the display): Shows menus, photos, and messages. The display can be pulled up and angled for better viewing. Cancel: Stops the current operation and returns to the main screen. Attention light: Indicates a problem occurred. See the display for more information. Back button: Returns to the previous screen on the display. Preview: Displays a preview of a copy or photo job. Setup: Presents the Setup Menu for generating reports, changing fax and network settings, and accessing tools and preferences. Help: Opens the Help Menu on the display where you can select a topic to learn more about it. Depending on the topic you select, the topic will appear on your display or on your computer screen. Rotate: Rotates the currently displayed photo 90 degrees clockwise. Subsequent presses continue to rotate the photo 90 degrees. Photosmart Express: Launches the Photosmart Express menu for printing, saving, editing, and sharing photos. Photo Fix: Automatically adjusts a photo for viewing or printing when turned on. Features include color effects, photo brightness, frames, and red-eye removal. Press Photo Fix to turn the feature off and on. By default, this feature is turned on. Reprints: Scans a photo and prints it.

(continued)

Label 12
Name and Description Print Photos: Prints the photos selected on your memory card. If no photos are currently selected, the HP All-in-One prints the photo currently showing on the display. From the idle state, pressing the Print Photos button launches the Photosmart Express menu. Scan Menu: Opens the Scan Menu where you can select a destination for your scan. Start Scan: From the idle state, pressing the Start Scan button opens the Scan Menu where you can choose a destination for your scan. If you are already in the Scan Menu, it sends the scan job to the highlighted destination. Copy Menu: Selects copy options, such as number of copies, paper size, and paper type. Start Copy Black: Starts a black-and-white copy. Start Copy Color: Starts a color copy. On: Turns the HP All-in-One on or off. When the HP All-in-One is off, a minimal amount of power is still supplied to the device. To completely remove power, turn the HP All-in-One off, and then unplug the power cord. Zoom Out: Zooms out to show more of a photo or multiple photos at the same time on the display. Zoom In: Zooms in to enlarge the image on the display. You can also use this button to adjust the crop box when printing. OK: Selects a menu, setting, or value displayed on the display. Direction pad: Allows you to navigate through menu options by pressing the up, down, left, or right arrow buttons. If you are zooming in on a photo, you can also use the arrow buttons to pan around the photo and select a different area to print.

6. 7. 8. 9.

To install the Mac HP All-in-One software 1. Quit all applications running on your Mac. 2. Insert the Mac CD that came with the HP All-in-One into the CD-ROM drive on your Mac. 3. Double-click the HP All-in-One installer icon. 4. In the Authenticate dialog, enter the Administrator password used to access your Mac or network. The installer software looks for HP All-in-One devices. 5. From the HP Installer dialog, select your language and the HP All-in-One you want to connect.
Follow the onscreen instructions to complete all the installation steps, including the Setup Assistant. When you have finished installing the software, the HP All-in-One is ready for use. To test your network connection, go to your Mac and print a self-test report to the HP All-in-One.
Load originals and load paper
You can copy or scan up to letter- or A4-size originals by loading them on the glass. To load an original on the glass 1. Lift the lid on the HP All-in-One. 2. Load your original print side down in the right front corner of the glass. Tip For more help on loading an original, refer to the engraved guides along the edge of the glass.

Close the lid.

To load full-size paper 1. Pull out the input tray, and then slide the paper-width and paper-length guides to their outermost positions.
Tap a stack of paper on a flat surface to align the edges, and then check the paper for the following: Make sure it is free of rips, dust, wrinkles, and curled or bent edges. Make sure all the paper in the stack is the same size and type.
Insert the stack of paper into the input tray with the short edge forward and the print side down. Slide the stack of paper forward until it stops. Tip If you are using letterhead, insert the top of the page first with the print side down. For more help on loading full-size paper and letterhead, refer to the diagram engraved in the base of the input tray.
Slide the paper-width and paper-length guides inward until they stop at the edges of the paper. Do not overload the input tray; make sure the stack of paper fits within the input tray and is no higher than the top of the paper-width guide.

Press or to highlight a paper size, and then press OK. The paper size choices available vary depending on your country/region. Note Depending on the paper size you choose, you might be prompted to choose a layout for the photos on your pages.
When the Fix Faded Original? prompt appears, highlight Yes or No as appropriate, and then press OK. The HP All-in-One scans your original and shows a preview of the photo on the display. Press OK to display the selection menu. Tip If you want to print more than one copy of the selected photo, press to highlight Copies, and then press OK. Use the arrows to increase or decrease the number of copies. If you want to edit the photo before printing, press Photo, and then press OK. to highlight Edit
Press to highlight Done, and then press OK. The Print Summary screen appears. Press or to highlight one of the following options, and then press OK. Print Options Enables you to manually specify the type of paper on which you are printing and whether you want to print a date and time stamp on your photo. By default, the Paper Type is set to Automatic and the Date Stamp setting is set to Off. If you want, you can change the defaults of these settings with the Set New Defaults option. Print Preview Displays a preview of what your printed page will look like. This enables you to verify your settings before printing and wasting paper and ink on potential mistakes. Prints your photo with the size and layout you selected.

Print Now

To scan to a computer 1. Load your original print side down in the right front corner of the glass. 2. Press Scan Menu. 3. Press to highlight Scan to Computer, and then press OK. 4. If the HP All-in-One is connected to one or more computers on a network, do the following: a. Press OK to select Select Computer. A list of the computers connected to the HP All-in-One appears on the display. Note The Select Computer menu might list computers with a USB connection in addition to those connected through the network.
Press OK to select the default computer, or press to select a different computer, and then press OK. The Scan To menu appears on the display, listing the applications on the selected computer. If the HP All-in-One is connected directly to a computer with a USB cable, proceed to step 5. Press OK to select the default application to receive the scan, or press to select a different application, and then press OK. A preview image of the scan appears on your computer, where you can edit it. Make any edits to the preview image, and then click Accept when you are finished.
Print 10 x 15 cm (4 x 6 inch) photos
You can select specific photos on your memory card to print as 10 x 15 cm (4 x 6 inch) photos. To print one or more 10 x 15 cm (4 x 6 inch) photos 1. Insert your memory card into the appropriate slot on the HP All-in-One. Turn the memory card so that the label faces left and the contacts are facing the HP All-inOne, and then push the card forward into the appropriate slot until the Photo light turns on. The HP All-in-One supports the memory cards described below. Each type of memory card can only be inserted in the appropriate slot for that card.

Top left: CompactFlash (I, II) Top right: Secure Digital, MultiMediaCard (MMC), Secure MultiMedia Card
Bottom left: xD-Picture Card Bottom right: Memory Stick, Magic Gate Memory Stick, Memory Stick Duo (with user-supplied adapter), Memory Stick Pro Press OK to select View & Print. When you press OK, the most recent photo on your memory card appears on the display. Press or to scroll through the photos on your memory card. When the photo you want to print appears, press OK. Tip If you want to print the photo using the default print settings, press Print Photos. The HP All-in-One will print a 10 x 15 cm (4 x 6 inch) copy of your photo onto the paper currently loaded in the photo tray.
Press OK to select 4 x 6. Press or to highlight a paper size, and then press OK. The following options are available: Print one 10 x 15 cm (4 x 6 inch) borderless photo on each sheet of 10 x 15 cm (4 x 6 inch) photo paper Print up to three 10 x 15 cm (4 x 6 inch) photos with borders on a full-size sheet of paper When you press OK, the selected photo reappears. 7. (Optional) Press and to select additional photos to print, or press OK to display the selection menu and change the print settings. For information on these options, see the onscreen Help that came with the HP All-in-One. 8. When you are done changing print settings and selecting photos, press OK to display the selection menu. 9. Press to highlight Done Selecting, and then press OK. The Print Summary screen appears. 10. Press or to highlight one of the following options, and then press OK. Print Options Enables you to manually specify the type of paper on which you are printing and whether you want to print a date and time stamp on your photo. By default, the Paper Type is set to Automatic and the Date Stamp setting is set to Off. If you want, you can change the defaults of these settings with the Set New Defaults option. Print Preview Displays a preview of what your printed page will look like. This enables you to verify your settings before printing and wasting paper and ink on potential mistakes. Prints your photos with the size and layout you selected.
Print from a software application
Most print settings are automatically handled by the software application. You need to change the settings manually only when you change print quality, print on specific types of paper or transparency film, or use special features.
To print from a software application (Windows) 1. Make sure you have paper loaded in the input tray. 2. On the File menu in your software application, click Print. 3. Select the HP All-in-One as the printer. If you set the HP All-in-One as the default printer, you can skip this step. The HP Allin-One will already be selected. 4. If you need to change settings, click the button that opens the Properties dialog box. Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer, or Preferences. Note When printing a photo, you must select options for the correct paper type and photo enhancement. 5. Select the appropriate options for your print job by using the features available in the Advanced, Printing Shortcuts, Features, and Color tabs. Tip You can easily select the appropriate options for your print job by choosing one of the predefined print tasks on the Printing Shortcuts tab. Click a type of print task in the Printing Shortcuts list. The default settings for that type of print task are set and summarized on the Printing Shortcuts tab. If necessary, you can adjust the settings here and save your custom settings as a new printing shortcut. To save a custom printing shortcut, select the shortcut and click Save. To delete a shortcut, select the shortcut and click Delete. 6. 7. Click OK to close the Properties dialog box. Click Print or OK to begin printing.

Press down on the gray latch until it clicks into place.
Repeat steps 2 through 5 for each ink cartridge you are replacing. Close the ink cartridge door.

Clean the HP All-in-One

To ensure that your copies and scans remain clear, you might need to clean the glass and lid backing. You might also want to dust the exterior of the HP All-in-One. Clean the glass Clean the lid backing Clean the exterior

Clean the glass

Glass that is dirty from fingerprints, smudges, hair, and dust on the main glass surface slows down performance and affects the accuracy of some features. To clean the glass 1. Turn off the HP All-in-One, and raise the lid. 2. Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive glass cleaner. Caution Do not use abrasives, acetone, benzene, or carbon tetrachloride on the glass, since they can damage it. Do not place or spray liquid directly on the glass. The liquid might seep under the glass and damage the device. 3. 4. Dry the glass with a dry, soft, lint-free cloth to prevent spotting. Turn on the HP All-in-One.

Clean the lid backing

Minor debris can accumulate on the white document backing located underneath the lid of the HP All-in-One. To clean the lid backing 1. Turn off the HP All-in-One, and raise the lid. 2. Clean the white document backing with a soft cloth or sponge slightly moistened with a mild soap and warm water. Wash the backing gently to loosen debris. Do not scrub the backing.
Dry the backing with a dry, soft, lint-free cloth. Caution Do not use paper-based wipes, as these might scratch the backing.
If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol, and wipe the backing thoroughly with a damp cloth to remove any residual alcohol. Caution Be careful not to spill alcohol on the glass or exterior of the HP Allin-One, as this might damage the device.
Turn on the HP All-in-One.

Clean the exterior

Use a soft cloth or slightly moistened sponge to wipe dust, smudges, and stains off the case. The interior of the HP All-in-One does not require cleaning. Keep fluids away from the control panel and the interior of the HP All-in-One. Caution To avoid damage to the exterior of the HP All-in-One, do not use alcohol or alcohol-based cleaning products.
Troubleshooting and support
This chapter contains troubleshooting information for the HP All-in-One. Specific information is provided for installation and configuration issues, and some operational topics. For more troubleshooting information, see the onscreen Help that came with your software. This chapter also provides warranty and support information. For support contact information, see the inside back cover of this guide. Many issues are caused when the HP All-in-One is connected to the computer using a USB cable before the HP All-in-One software is installed on the computer. If you connected the HP All-in-One to your computer before the software installation screen prompts you to do so, you must follow these steps:

Hardware setup troubleshooting
Use this section to solve any problems you might encounter while setting up the HP All-in-One hardware. The HP All-in-One will not turn on Cause The HP All-in-One is not properly connected to a power supply. Solution Make sure the power cord is firmly connected to both the HP All-in-One and the power adaptor. Plug the power cord into a grounded power outlet, surge protector, or power strip.
Power connection Power cord and adaptor Grounded power outlet
If you are using a power strip, make sure the power strip is on. Or, try plugging the HP Allin-One directly into a grounded power outlet. Test the power outlet to make sure it is working. Plug in an appliance that you know works, and see if the appliance has power. If not, then there might be a problem with the power outlet. If you plugged the HP All-in-One into a switched outlet, make sure the switch is on. If it is switched to on but still does not work, then there might be a problem with the power outlet.
Cause You pressed the On button too quickly.
Chapter 2 Solution The HP All-in-One might not respond if you press the On button too quickly. Press the On button once. It might take a few minutes for the HP All-in-One to turn on. If you press the On button again during this time, you might turn the device off. Warning If the HP All-in-One still does not turn on, it might have a mechanical failure. Unplug the HP All-in-One from the power outlet and contact HP. Go to: www.hp.com/support If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
I connected the USB cable, but I am having problems using the HP All-in-One with my computer Cause The USB cable was connected before the software was installed. Connecting the USB cable before prompted can cause errors. Solution You must first install the software that came with the HP All-in-One before connecting the USB cable. During installation, do not plug in the USB cable until prompted by the onscreen instructions. Once you have installed the software, connecting your computer to the HP All-in-One with a USB cable is straightforward. Simply plug one end of the USB cable into the back of your computer and the other into the back of the HP All-in-One. You can connect to any USB port on the back of your computer.

Network troubleshooting

This section contains network troubleshooting information for the HP All-in-One. Specific information is provided for installation and configuration issues. The computer is unable to discover the HP All-in-One I received a System Requirements Error: No TCP/IP The Printer not Found screen appears during installation I am using a cable modem without a router and I do not have IP addresses
Chapter 2 The computer is unable to discover the HP All-in-One Cause Cables are not connected properly. Solution Check the following cables to ensure they are connected properly. Cables between the HP All-in-One and the hub or router Cables between the hub or router and your computer Cables to and from your modem or HP All-in-One Internet connection (if applicable)
Cause Your Local Area Network card (LAN card) is not set up properly. Solution Make sure that your LAN card is set up properly. To check your LAN card (Windows) 1. Right-click My Computer. 2. In the System Properties dialog box, click the Hardware tab. 3. Click Device Manager. 4. Make sure your card shows up under Network Adapters. 5. Refer to the documentation that came with your card. To check your LAN card (Mac) 1. 2. 3. Click the Apple icon on the Menu bar. Select About This Mac and then click More Info. The System Profiler is displayed. In the System Profiler, click Network. Make sure your LAN card appears in the list.
Cause You do not have an active network connection. Solution Check to see if you have an active network connection. To see if you have an active network connection Check the two Ethernet indicator lights on the top and bottom of the RJ-45 Ethernet jack on the back of the HP All-in-One. The lights indicate the following: a. Top light: If this light is a solid green, the device is properly connected to the network, and communications have been established. If the top light is off, there is no network connection. Bottom light: This yellow light flashes when data is being sent or received by the device over the network.
To establish an active network connection 1. 2. Check the cable connections from the HP All-in-One to your gateway, router, or hub to ensure connections are secure. If the connections are secure, turn off the power on the HP All-in-One, and then turn it on again. Press the On button on the control panel to turn the HP All-in-One off, and press it again to turn the device on. Also, turn off the power on your router or hub, and then turn it on again.
I received a System Requirements Error: No TCP/IP Cause Your Local Area Network (LAN) card (NIC) is not installed properly. Solution Make sure your LAN card is installed properly and set up for TCP/IP. See the instructions that came with your LAN card. The Printer not Found screen appears during installation Cause The HP All-in-One is not turned on. Solution Turn on the HP All-in-One.

Cause You do not have an active network connection. Solution Make sure you have an active network connection. To make sure your network connection is active 1. If the connections are secure, turn off the power on the HP All-in-One, and then turn it on again. Press the On button on the control panel to turn the HP All-in-One off, and press it again to turn the device on. Also, turn off the power on your router or hub, and then turn it on again. Check the cable connections from the HP All-in-One to your gateway, router, or hub to ensure connections are secure. Make sure the HP All-in-One is connected to the network with a CAT-5 Ethernet cable.
Cause Cables are not connected properly. Solution Check the following cables to ensure they are connected properly: Cables between the HP All-in-One and the hub or router Cables between the hub or router and your computer Cables to and from your modem or HP All-in-One Internet connection (if applicable)
Cause A firewall, anti-virus, or anti-spyware application is preventing the HP All-in-One from accessing your computer. Solution Temporarily disable the firewall, anti-virus, or anti-spyware, and uninstall and then reinstall the HP All-in-One software. You can re-enable your firewall, anti-virus, or anti-spyware application after installation is complete. If you see firewall pop-up messages, you must accept or allow the pop-up messages. For more information, see the documentation provided with the firewall software. Cause A Virtual Private Network (VPN) is preventing the HP All-in-One from accessing your computer. Solution Try temporarily disabling the VPN before proceeding with the installation. Note The HP All-in-One functionality will be limited during VPN sessions.
Cause The Ethernet cable is not plugged in to the router, switch, or hub, or the cable is defective. Solution Try reinserting the cables. Or, if necessary, try a different cable. Cause The HP All-in-One is assigned an AutoIP address instead of DHCP. Solution This indicates that the HP All-in-One is not connected properly to the network. Check the following: Make sure all cables are connected properly and securely. If the cables are connected properly, your access point, router, or home gateway might not be sending an address. If this is the case, you might need to reset the device. Make sure the HP All-in-One is on the correct network.

Cause The HP All-in-One is on the wrong subnet or gateway. Solution Print a network configuration page, and verify that the router and HP All-in-One are on the same subnet and gateway.
Chapter 2 I am using a cable modem without a router and I do not have IP addresses Cause If you have a computer with a cable modem, a separate Local Area Network (LAN) for your other computers, and no DHCP or router, you must use AutoIP to assign IP addresses to the other computers and to the HP All-in-One. Solution To obtain an IP address for the computer with the cable modem Your Internet Service Provider (ISP) assigns either a static or dynamic IP address to the computer with the cable modem.
To assign IP addresses to the remaining computers and the HP All-in-One Troubleshooting and support Use AutoIP to assign IP addresses to the remaining computers and the HP All-in-One. Do not assign a static IP address.

Clear paper jams

If the HP All-in-One has a paper jam, check the rear door. To clear a paper jam from the rear door 1. 2. Turn off the HP All-in-One. Press in the tab on the rear door to release the door. Remove the door by pulling it away from the HP All-in-One. Caution Trying to clear a paper jam from the front of the HP All-in-One can damage the print mechanism. Always access and clear paper jams through the rear door.
Gently pull the paper out of the rollers. Caution If the paper tears when you are removing it from the rollers, check the rollers and wheels for torn pieces of paper that might be remaining inside the device. If you do not remove all the pieces of paper from the HP All-in-One, more paper jams are likely to occur.
Replace the rear door. Gently push the door forward until it snaps into place. Turn on the HP All-in-One, and then press OK to continue the current job.

Ink cartridge messages

The following is a list of ink cartridge error messages: Calibration error Cannot print The following ink cartridges cannot be used after device initialization and must be replaced Ink cartridge problem Ink cartridge(s) are empty Ink cartridge(s) are expired

Print head assembly is stalled Cause The print head assembly is blocked. Solution Remove any objects that are blocking the print head assembly. To clear the print head assembly 1. Open the ink cartridge door by lifting from the front center of the device, until the door locks into place.

2. 3. 4.

Remove any objects that are blocking the print head assembly, including any packing materials. Turn the HP All-in-One off, then turn it on again. Close the ink cartridge door.
Print head failure Cause The print head assembly or the ink delivery system has failed and the HP All-in-One can no longer print. Solution Contact HP Support. Go to: www.hp.com/support If prompted, choose your country/region, and then click Contact HP for information on calling for technical support. Printer alignment failed Cause An incorrect type of paper is loaded in the input tray.
Chapter 2 Solution If you have color or photo paper loaded in the input tray when you align the printer, the alignment might fail. Load unused plain white letter or A4 paper into the input tray, and then try the alignment again. If the alignment fails again, you might have a defective sensor. Contact HP Support. Go to: www.hp.com/support If prompted, choose your country/region, and then click Contact HP for information on calling for technical support. Cause The print head assembly or sensor is defective. Solution Contact HP Support. Go to: www.hp.com/support If prompted, choose your country/region, and then click Contact HP for information on calling for technical support. Troubleshooting and support Replace ink cartridges soon Cause This warning indicates one or more ink cartridge is out of ink. Solution You might be able to continue printing for a short period of time with ink remaining in the print head assembly. Replace the indicated ink cartridge(s) or press OK on the control panel to continue. For more information, see: Replace the ink cartridges
Wrong ink cartridge(s) installed Cause The wrong ink cartridge(s) are installed. Solution The first time you set up and use the HP All-in-One, make sure to install the ink cartridges that were shipped with your device. The ink in these ink cartridges is specially formulated to mix with the ink in the print head assembly. To resolve this error, replace the affected ink cartridge(s) with the ink cartridges that were shipped with the HP All-in-One. For more information, see: Replace the ink cartridges

Maximum capacity. Output tray capacity is affected by the type of paper and the amount of ink you are using. HP recommends emptying the output tray frequently. Maximum capacity.

Paper sizes

For a complete list of supported media sizes, see the printer software.

Print specifications

Up to 1200 x 1200 rendered dpi black when printing from a computer Up to 4800 x 1200 optimized dpi color when printing from a computer and 1200-input dpi Print speeds vary according to the complexity of the document Panorama-size printing Method: drop-on-demand thermal inkjet Language: PCL3 GUI Duty cycle: Up to 3000 printed pages per month

Chapter 3

Copy specifications
Copy resolution up to 1200x1200 Digital image processing Up to 99 copies from original (varies by model) Zoom to 400%, fit to page (varies by model) Copy speeds vary according to the complexity of the document

Scan specifications

Image editor included Integrated OCR software automatically converts scanned text to editable text (if installed) Twain-compliant interface Resolution: up to 2400 x 4800 dpi optical (varies by model); 19200 dpi enhanced (software) Color: 48-bit color, 8-bit grayscale (256 levels of gray) Maximum scan size from glass: 21.6 x 29.7 cm (8.5 x 11.7 inches)

Physical specifications

Specification Height Width Depth Weight In the open position 43.6 cm (17 inches) 44.6 cm (17.4 inches) 49.9 cm (19.5 inches) 9.5 kg (21 pounds) In the closed position 18.9 cm (7.4 inches) 44.6 cm (17.4 inches) 38.7 cm (15.1 inches) 9.5 kg (21 pounds)

Power specifications

Power consumption: 16 watts maximum (average printing) Input voltage: AC 100 to 240 V ~ 1 A 5060 Hz, grounded Output voltage: DC 32 V===940 mA, 16 V===625mA
Environmental specifications
Recommended operating temperature range: 15 to 32 C (59 to 90 F) Allowable operating temperature range: 5 to 35 C (41 to 95 F) Humidity: 15% to 80% RH non-condensing Non-operating (Storage) temperature range: 20 to 50 C (4 to 122 F) In the presence of high electromagnetic fields, it is possible the output from the HP All-in-One may be slightly distorted HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize injected noise due to potential high electromagnetic fields

Acoustic information

If you have Internet access, you can get acoustic information from the HP website. Go to: www.hp.com/support.
Environmental product stewardship program
Hewlett-Packard is committed to providing quality products in a environmentally sound manner. For information on HP's Environmental product stewardship program, see the onscreen Help.

Regulatory notices

The HP All-in-One meets product requirements from regulatory agencies in your country/region. For a complete listing of regulatory notices, see the onscreen Help.

Regulatory model identification number
For regulatory identification purposes, your product is assigned a Regulatory Model Number. The Regulatory Model Number for your product is SDGOB-0605-01. This regulatory number should not be confused with the marketing name (HP Photosmart C5100 All-in-One series, etc.) or product numbers (Q8211A, etc.).
Ink cartridge warranty information
The HP ink cartridge(s) warranty is applicable when the product is used in its designated HP printing device. This warranty does not cover HP ink products that have been refilled, remanufactured, refurbished, misused, or tampered with. During the warranty period the product is covered as long as the HP ink is not depleted and the end of warranty date has not been reached. The end of warranty date, in YYYY/MM/DD format, may be found on the product as indicated:

Warranty

Symbols/Numerics 10 x 15 cm photo paper specifications 35 A after the support period 34 B blocked print head 25 buttons, control panel 4 C cancel button 4 CAT-5 Ethernet cable 7 clean exterior 21 glass 20 lid backing 20 color graphics display 4 connect wired network (Ethernet) 7 connection problems HP All-in-One does not turn on 23 control panel buttons 4 features 4 copy make a copy 12 specifications 36 customer support warranty 34 D damaged, ink cartridge 29 direction pad 5 display change language 24 change measurements 25 E envelopes specifications 35 environment Environmental product stewardship program 36
environmental specifications 36 G glass clean 20 H help use onscreen Help 6 Hewlett-Packard Company notices 2 I ink empty 30 replace soon 32 ink cartridges damaged 29 empty 30 error message 32 error messages 28 expired 30 HP ink depleted 31 incorrect 29, 32 missing 29 non-HP ink 30 replace 18 replace soon 32 troubleshoot 25 J jams, paper
clean lid backing 20 replace ink cartridges 18 make a copy 12 memory cards slots 2 missing ink cartridge 29 N network finish setup O OK button 5 on button 5 P paper jams 12, 25, 28 paper sizes 35 specifications 35 paper tray capacities 35 phone support 33 phone support period period for support 33 photo paper specifications 35 Photosmart Express 4 physical specifications 36 power specifications 36 print from software application 16 specifications 35 print head failure 31 stalled 31 print head, blocked 25 printer found screen, Windows 9 R regulatory notices regulatory model identification number 37

, OK. . , OK. , , . , . . , . . .
1. . 2. . 3. , OK.
HP All-in-One , :. OK . , HP All-in-One. , , , USB. OK , OK. . HP All-in-One USB, 5. OK , OK. , . , .
10 x 15 10 x 15 1. HP All-in-One. , , HP All-in-One.
, . HP All-in-One . .
: CompactFlash (I, II) : Secure Digital, MultiMediaCard (MMC), Secure MultiMedia Card : xD-Picture Card : Memory Stick, Magic Gate Memory Stick, Memory Stick Duo ( ), Memory Stick Pro OK ./. OK , . , , . , , OK.
, . HP All-in-One 10 x 15 , .
OK 4 x 6. OK. : 10 x 15 10 x 15 10 x 15
OK . () OK . . , HP All-in-One. 8. OK . 9. , OK. . 10. , OK. 7.
, , . , - . .

. . .

, . , . (Windows) 1. , . 2. . 3. HP All-in-One . HP All-in-One , . HP All-in-One . 4. , , . , , , .

. .

, , . . . . , . , . , .

OK . OK .

(Mac) 1. , . 2. File () Page Setup ( ). Page Setup ( ), , . 3. , HP All-in-One. 4. : . . . 5. OK. 6. File () Print (). Print () Copies & Pages ( ). 7. . . 8. Print () .
. HP All-in-One , , , . . HP All-in-One, : www.hp.com/learn/suresupply. /,
, . 1. HP All-in-One. 2. . , .
, HP All-in-One, . . (, , , ) .
. HP, . Web- : www.hp.com/hpinfo/globalcitizenship/environment/recycle/inkjet.html 5. , . , , , .

25 , . .

. , HP All-in-One.
- , , - . 1. HP All-in-One . 2. , . , , . . . 3. 4. , , . HP All-in-One.

, HP All-in-One, .

1. HP All-in-One . 2. , . , . . 3. , . . 4. , () , . HP All-in-One . 5. HP All-in-One.
, . HP All-in-One . HP All-in-One. HP All-in-One .
HP All-in-One. , . . , . . . . , HP All-in-One USB HP All-in-One . HP All-in-One , , . 1. 2. 3. 4. 5. USB . ( ). . HP All-in-One, , . HP All-in-One. USB , .
USB , , , . HP All-in-One . , HP All-in-One. Windows 1. Windows , , . 2. . 3. HP All-in-One, /. . 4. HP All-in-One . 5. . HP All-in-One, . HP All-in-One , . 6. 7. - HP All-in-One . , , , HP All-in-One.

Windows .

2 HP . HP ( ), . Mac 1. 2. 3. 4. 5. 6. 7. HP All-in-One Mac. Applications:Hewlett-Packard (:Hewlett-Packard). HP Uninstaller ( HP). , . . , - HP All-in-One -. -, HP All-in-One Installer ( HP " "). , , , HP All-in-One.

, HP All-in-One. HP All-in-One HP All-in-One . , HP All-in-One . , .

, . HP All-in-One .

. , . , . HP All-in-One , . , , .
. . HP All-in-One , . . . . HP All-in-One . . , . HP All-in-One - , . HP All-in-One HP. : www.hp.com/support /, HP .
USB , HP All-in-One USB , . USB . USB, , HP All-in-One. USB . HP All-in-One USB . USB , HP All-in-One. USB .
USB , HP All-in-One. . / 1. 2. 3. 4.

5. 6. 7.

. , OK. , OK. . OK. , , OK. / , OK. / . / OK. , , OK.
, HP All-in-One /. / , . / . .
, (, , , ). Letter A4 . - , , . HP. : www.hp.com/support. / , Contact HP ( HP) .
, , HP All-in-One . , . .
HP All-in-One HP All-in-One . 28 HP Photosmart C5100 All-in-One series

HP All-in-One .

, . , . , HP All-in-One . HP All-in-One. . , HP All-in-One. , HP All-in-One . HP All-in-One, . , HP All-in-One . .
HP All-in-One. . HP All-in-One : TCP/IP " " , IP- HP All-in-One . . HP All-in-One . HP All-in-One ( ).
( ). . (Windows) 1. 2. 3. 4. 5. . . . . , .
(Mac) 1. 2. Apple Menu (). About This Mac ( Mac) More Info (). System Profiler ( ). System Profiler Network (). , . .

2 .

Ethernet RJ-45 Ethernet, HP All-in-One. :. : , . , . : , .
1. 2. HP All-in-One , . , HP All-in-One, . HP All-in-One, . , .
: TCP/IP . TCP/ IP. . " " HP All-in-One . HP All-in-One. . . 1. , HP All-in-One, . . HP All-in-One, . , . 2. HP All-in-One , . 3. , HP All-in-One Ethernet CAT-5. . . HP All-in-One . HP All-in-One ( ). , - HP All-in-One . , -, 30 HP Photosmart C5100 All-in-One series
HP All-in-One. , . , . . . (VPN) HP All-in-One . . VPN HP All-in-One .
Ethernet , , . . . IP- HP All-in-One AutoIP, DHCP. HP All-in-One . : , . , , , . . , HP All-in-One .
HP All-in-One . , HP All-in-One . , IP- , DHCP , IP HP All-in-One IP- (AutoIP). IP- IP-.
IP- HP All-in-One AutoIP IP- HP All-in-One. IP-.