HP PSC 1500
Part Number: Q5888-00003
Here you can find all about HP PSC 1500, for example driver and printer windows 7, series ink, driver download, printer, software, series. You can also write a review. [ Report abuse or wrong photo | Share your HP PSC 1500 photo ]
HP PSC 1500 Printer, size: 2.6 MB
HP PSC 1500 All-IN-ONE
HP PSC 1500
HP PSC 1500
User reviews and opinions
|immo_we||9:10pm on Friday, March 12th, 2010|
|Wonderful Experience This was my first laser printer... for the money I am very impressed. The toner cartridges lasted over a year. Bad Experience When it worked the prints were good, but that is ONLY when it worked! Great Color Laserjet This is a 600 dpi printer with a carosel based print engine. It features 16ppm black and 4ppm color.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Load 10 x 15 cm (4 x 6 inch) photo paper
You can load 10 x 15 cm (4 x 6 inch) photo paper into the paper tray of your HP All-inOne. For best results, use a recommended type of 10 x 15 cm (4 x 6 inch) photo paper. For more information, see Recommended papers.
For best results, set the paper type and paper size before copying or printing. For information on changing paper settings, see the onscreen HP Image Zone Help. Tip To help prevent rips, wrinkles, and curled or bent edges, store all paper flat in a resealable bag. If the paper is not stored properly, extreme changes in temperature and humidity might result in curled paper that does not work well in the HP All-in-One. To load 10 x 15 cm (4 x 6 inch) photo paper 1. Remove all paper from the paper tray. 2. Insert the stack of photo paper into the far right side of the paper tray with the short edge forward and the glossy side down. Slide the stack of photo paper forward until it stops. If the photo paper you are using has perforated tabs, load the photo paper so that the tabs are closest to you. 3. Squeeze and hold the tab on the top of the paper-width guide, then slide the paper-width guide inward against the stack of photo paper until it stops. Do not overload the paper tray; make sure the stack of photo paper fits within the paper tray and is no higher than the top of the paper-width guide.
Load postcards or Hagaki cards
You can load postcards or Hagaki cards into the paper tray of your HP All-in-One. For the best results, set the paper type and size before printing or copying. For more information, see the onscreen HP Image Zone Help. To load postcards or Hagaki cards 1. Remove all paper from the paper tray. 2. Insert the stack of cards into the far right side of the paper tray with the short edge forward and the print side down. Slide the stack of cards forward until it stops. 3. Squeeze and hold the tab on the top of the paper-width guide, then slide the paper-width guide inward against the stack of cards until it stops. Do not overload the paper tray; make sure the stack of cards fits within the paper tray and is no higher than the top of the paper-width guide.
You can load one or more envelopes into the paper tray of your HP All-in-One. Do not use shiny or embossed envelopes or envelopes that have clasps or windows. Note For specific details on how to format text for printing on envelopes, consult the help files in your word processing software. For best results, consider using a label for the return address on envelopes. To load envelopes 1. Remove all paper from the paper tray. 2. Insert one or more envelopes into the far right side of the paper tray with the envelope flaps up and to the left. Slide the stack of envelopes forward until it stops. Tip For more help on loading envelopes, refer to the diagram engraved in the base of the paper tray. 3. Squeeze and hold the tab on the top of the paper-width guide, then slide the paper-width guide inward against the stack of envelopes until it stops. Do not overload the paper tray; make sure the stack of envelopes fits within the paper tray and is no higher than the top of the paper-width guide.
Avoid paper jams
To help avoid paper jams, follow these guidelines: Prevent curled or wrinkled paper by storing all unused paper flat in a resealable bag. Remove printed papers from the paper tray frequently. Ensure that paper loaded in the paper tray lays flat and the edges are not bent or torn. Do not combine different paper types and paper sizes in the paper tray; the entire stack of paper in the paper tray must be the same size and type. Adjust the paper-width guide in the paper tray to fit snugly against all paper. Make sure the paper guide does not bend the paper in the paper tray.
Do not force paper too far forward in the paper tray. Use paper types that are recommended for your HP All-in-One. For more information, see Choose papers for printing and copying.
For more information about clearing paper jams, see Paper troubleshooting.
Use a PictBridge camera
This HP All-in-One supports the PictBridge standard, which allows you to connect any PictBridge-compliant camera and print photos without using your computer. Check your camera's user guide to see if it supports PictBridge capability. Your HP All-in-One features a PictBridge camera port on the front of the device, as shown below.
Note The camera port only supports USB-equipped digital cameras that support PictBridge. It does not support other types of USB devices. If you attach a USB device that is not a compatible digital camera to the camera port, an error message appears on your computer screen.
Connect a digital camera
The HP All-in-One supports the PictBridge standard, which lets you connect any PictBridge-compatible camera to the camera port and print JPEG photos contained on the memory card in the camera. We recommend you connect your camera's power cable to the camera to conserve battery power. 1. 2. 3. Make sure the HP All-in-One is turned on and that the initialization process is finished. Connect your PictBridge-compatible digital camera to the camera port on the front of your HP All-in-One using the USB cable supplied with your camera. Turn on your camera and make sure it is in PictBridge mode. When the camera is connected correctly, the PictBridge logo appears in the Copy area of the control panel, next to the number of copies, as shown below.
For more information on printing from a PictBridge-compatible digital camera, see the documentation that came with your camera. If the camera is not PictBridge-compliant or is not in PictBridge mode, the PictBridge icon will blink, and an error icon appears in the number of copies area on the control panel as shown below.
To print from the software application you used to create your document (Mac) 1. Make sure you have paper loaded in the paper tray.
Select the HP All-in-One in the Chooser (OS 9), Print Center (OS X v10.2 or earlier), or Printer Setup Utility (OS X v10.3 or later) before you begin printing. From the File menu in your software application, choose Page Setup. The Page Setup dialog box appears, allowing you to specify the paper size, orientation, and scaling. Specify the page attributes: Choose the paper size. Select the orientation. Enter the scaling percentage. Note For OS 9, the Page Setup dialog box also includes options to print a mirrored (or reversed) version of the image, and to adjust the page margins for two-sided printing.
Click OK. From the File menu in your software application, choose Print. The Print dialog box appears. If you are using OS 9, the General panel opens. If you are using OS X, the Copies & Pages panel opens. Change the print settings for each option in the pop-up menu, as appropriate for your project. Click Print to begin printing.
Change the print settings
You can customize the print settings of the HP All-in-One to handle nearly any print task.
Before you change print settings, you should decide if you want to change the settings for the current print job only, or if you want to make the settings the defaults for all future print jobs. How you display print settings depends on whether or not you want to apply the change to all future print jobs or just to the current print job. To change the print settings for all future jobs 1. In the HP Director (or HP Solution Center), click Settings, point to Print Settings, and then click Printer Settings. 2. Make changes to the print settings, and click OK. To change the print settings for the current job 1. On the File menu in your software application, click Print. 2. Make sure the HP All-in-One is the selected printer. 3. Click the button that opens the Properties dialog box. Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer, or Preferences. 4. Make changes to the print settings, and click OK. 5. Click Print or OK in the Print dialog box to print the job.
Use the Page Setup and Print dialog boxes to change the settings for your print job. Which dialog box you use depends on which setting you want to change. To change the paper size, orientation, or scaling percentage 1. Select the HP All-in-One in the Chooser (OS 9), Print Center (OS X v10.2 or earlier), or Printer Setup Utility (OS X v10.3 or later) before you begin printing. 2. From the File menu in your software application, choose Page Setup. 3. Make changes to the paper size, orientation, and scaling percentage settings, and click OK. To change all other print settings 1. Select the HP All-in-One in the Chooser (OS 9), Print Center (OS X v10.2 or earlier), or Printer Setup Utility (OS X v10.3 or later) before you begin printing. 2. From the File menu in your software application, choose Print. 3. Make changes to the print settings, and click Print to print the job.
Note If you click See All Services, you can choose from among all of the services available in your country/region, for example: HP Instant Share E-mail and Create Online Albums. Follow the onscreen instructions. 5. 6. The Go Online screen appears in the Work area of the HP Instant Share tab. Click Next and follow the onscreen instructions. From the HP Instant Share E-mail service, you can: Send an e-mail message with thumbnail images of your photos which can be viewed, printed, and saved over the Web. Open and maintain an e-mail address book. Click Address Book, register with HP Instant Share, and create an HP Passport account. Send your e-mail message to multiple addresses. Click the related link. Send a collection of images to a friend or relative's network-connected device. Enter the name assigned to the device by the recipient in the E-mail address field followed by @send.hp.com. You will be prompted to sign in to HP Instant Share with your HP Passport userid and password. Note If you have not previously set up HP Instant Share, click I need an HP Passport account on the Sign in with HP Passport screen. Obtain an HP Passport user ID and password.
Send images using the HP Instant Share client application software (Mac OS X v10.2.8 and later)
Note Mac OS X v10.2.1 and 10.2.2 are not supported.
Use the HP Instant Share client application to share images with friends and relatives. Simply open the HP Instant Share window, select the images you want to share, and forward the images using the HP Instant Share E-mail service. Note For more information on using the HP Instant Share client application software, see the onscreen HP Image Zone Help. To use the HP Instant Share client application 1. Select the HP Image Zone icon from the Dock. The HP Image Zone opens on your desktop. 2. In the HP Image Zone, click the Services button at the top of the window. A list of applications appears in the lower part of the HP Image Zone. 3. Choose HP Instant Share from the list of applications. The HP Instant Share client application software opens on your computer. 4. Use the + button to add an image to the window, or the - button to remove an image. Note For more information on using the HP Instant Share client application software, see the onscreen HP Image Zone Help. 5. 6. Make sure the images you want to share display in the HP Instant Share window. Click Continue and follow the onscreen instructions.
7. 8. 9.
From the HP Instant Share services list, select the service you want to use to send your scanned image. Follow the onscreen instructions. From the HP Instant Share E-mail service, you can: Send an e-mail message with thumbnail images of your photos which can be viewed, printed, and saved over the Web. Open and maintain an e-mail address book. Click Address Book, register with HP Instant Share, and create an HP Passport account. Send your e-mail message to multiple addresses. Click the related link. Send a collection of images to a friend or relative's network-connected device. Enter the name assigned to the device by the recipient in the E-mail address field followed by @send.hp.com. You will be prompted to sign in to HP Instant Share with your HP Passport userid and password. Note If you have not previously set up HP Instant Share, click I need an HP Passport account on the Sign in with HP Passport screen. Obtain an HP Passport user ID and password.
Check the estimated ink levels
You can easily check the ink supply level to determine how soon you might need to replace a print cartridge. The ink supply level shows an estimate of the amount of ink remaining in the print cartridges. Tip You can also print a self-test report to see if your print cartridges might need to be replaced. For more information, see Print a self-test report.
To check the ink levels from the HP Director (Windows) 1. In the HP Director (or HP Solution Center), click Settings, point to Print Settings, and then click Printer Toolbox. Note You can also open the Printer Toolbox from the Print Properties dialog box. In the Print Properties dialog box, click the Services tab, and then click Service this device.
Click the Estimated Ink Level tab. The estimated ink levels for the print cartridges appear.
To check the ink levels from the HP Image Zone software (Mac) 1. In the HP Director (OS 9) or HP Image Zone (OS X), choose Settings, and then choose Maintain Printer. 2. If the Select Printer dialog box appears, select your HP All-in-One, and then click Utilities. 3. From the pop-up menu, choose Ink Level. The estimated ink levels for the print cartridges appear.
Print a self-test report
If you are experiencing problems with printing, print a self-test report before you replace the print cartridges. This report provides useful information on several aspects of your device, including your print cartridges. 1. 2. 3. Load letter, A4, or legal unused plain white paper into the paper tray. Press and hold the Cancel / Resume button and then press the Start Copy Color button. The HP All-in-One prints a self-test report, which might indicate the source of the printing problem. A sample of the ink test area of the report is shown below.
Make sure the test patterns are even and show a complete grid. If more than a few lines in a pattern are broken, this might indicate a problem with the nozzles. You might need to clean the print cartridges. For more information, see Clean the print cartridges. Make sure the color blocks have even consistency and are representative of the colors listed below. You should see cyan, magenta, and yellow color blocks. Check the color blocks and lines of color for streaking or white lines. Streaks might indicate clogged nozzles or dirty contacts. You might need to clean the print cartridges. For more information on cleaning the print cartridges, see Clean the print cartridges. Do not clean with alcohol. If color blocks are missing, or if a block of color is muddy or does not match the label indicated below the block, this might indicate that the tri-color print cartridge is out of ink. You might need to replace the print cartridge. For more information on replacing print cartridges, see Replace the print cartridges.
To replace the print cartridges 1. Make sure the HP All-in-One is on. Caution If the HP All-in-One is off when you lift the print-carriage access door to access the print cartridges, the HP All-in-One will not release the cartridges for changing. You might damage the HP All-in-One if the print cartridges are not docked safely on the right side when you try to remove them. 2. 3. Make sure the paper tray is down and there is letter or A4 unused plain white paper loaded in the paper tray. Open the print-carriage access door by lowering the door. The print carriage moves to the far right side of the HP All-in-One.
Wait until the print carriage is idle and silent, and then, using your thumb, lightly press down on a print cartridge to release it. If you are replacing the tri-color print cartridge, remove the print cartridge from the slot on the left. If you are replacing the black or photo print cartridge, remove the print cartridge from the slot on the right.
Print cartridge slot for the tri-color print cartridge Print cartridge slot for the black and photo print cartridges
Pull the print cartridge toward you out of its slot.
If you are removing the black print cartridge in order to install the photo print cartridge, store the black print cartridge in the print cartridge protector. For more information, see Use the print cartridge protector. If you are removing the print cartridge because it is low or out of ink, recycle the print cartridge. The HP Inkjet Supplies Recycling Program is available in many countries/regions, and lets you recycle used print cartridges free of charge. For more information, go to the following website: www.hp.com/hpinfo/globalcitizenship/environment/recycle/inkjet.html Remove the new print cartridge from its packaging and, being careful to touch only the black plastic, gently remove the plastic tape by using the pink pull tab.
Maintain your HP All-in-One 3
Caution Do not touch the copper-colored contacts or ink nozzles. Touching these parts can result in clogs, ink failure, and bad electrical connections.
Slide the new print cartridge forward at a slight upward angle into the empty slot. Using your index finger, push the print cartridge forward until it clicks into place. If the print cartridge you are installing has a white triangle on its label, slide the print cartridge into the slot on the left. The label for the slot is green with a solid white triangle. If the print cartridge you are installing has a white square or a white pentagon on its label, slide the print cartridge into the slot on the right. The label for the slot is black with a solid white square and a solid white pentagon.
View the Readme file
You might want to refer to the Readme file for more information on possible installation problems. In Windows, you can access the Readme file from the Windows taskbar by clicking Start, pointing to Programs or All Programs, pointing to HewlettPackard, pointing to HP PSC 1500 All-in-One series, and then clicking View the Readme File. In Mac OS 9 or OS X, you can access the Readme file by double-clicking the icon located in the top-level folder of the HP All-in-One software CD-ROM. Using the reinstall utility after a failed installation to return your computer to a state that will allow the HP All-in-One to be reinstalled. Using the reinstall utility in Windows 98 to recover a missing Composite USB System Driver. System requirements.
The Readme file provides more information, including:
This section includes installation and configuration troubleshooting tips for some of the most common issues associated with software installation and hardware setup.
Hardware setup troubleshooting
Use this section to solve any problems you might encounter while setting up the HP All-in-One hardware.
My HP All-in-One does not turn on Solution Try the following: Make sure the power cable is firmly connected to both the HP All-in-One and the power adaptor, as shown below.
Plug the power cable into a grounded power outlet, surge protector, or power strip. If you are using a power strip, make sure the power strip is on. Test the power outlet to make sure it is working. Plug in an appliance that you know works, and see if the appliance has power. If not, then there might be a problem with the power outlet. If you plugged the HP All-in-One into a switched outlet, make sure the switch is on. When you press the On button, wait a few seconds for the HP All-in-One to turn on.
My USB cable is not connected Solution You must first install the software that came with your HP All-in-One before connecting the USB cable. During installation, do not plug in the USB cable until prompted by the onscreen instructions. Connecting the USB cable before prompted can cause errors. Connecting your computer to your HP All-in-One with a USB cable is straightforward. Simply plug one end of the USB cable into the back of your computer and the other into the back of the HP All-in-One. You can connect to any USB port on the back of your computer. Note 1 AppleTalk is not supported.
If you are using a Mac: Check the Apple System Profiler (OS 9) or the System Profiler (OS X) to verify your USB connection. If the HP All-in-One shows up in the USB window, then the USB connection between your computer and HP All-in-One is working. If it is working, there might be a problem with the software. Try to run the HP All-in-One Setup Assistant to see if it can detect the HP All-in-One. (You can access the HP All-in-One Setup Assistant through the HP Image Zone software.) Check other printers or scanners. You might need to disconnect older products from your computer. If your HP All-in-One is networked, see the Network Guide that came with your HP All-in-One. After you check the connections, try restarting your computer. Turn your HP All-in-One off and then on again.
For more information on setting up your HP All-in-One and connecting it to your computer, see the Setup Guide that came with your HP All-in-One.
I received a message on the computer about a paper jam or a blocked carriage Cause If either a paper jam or blocked carriage error message appears on the computer, there might be some packing material inside the HP All-in-One. Solution Lift open the print-carriage access door to expose the print cartridges and remove any packing material, tape, or other foreign objects. Turn off the HP All-in-One, wait one minute, and then press the On button to turn the HP Allin-One back on.
Software installation troubleshooting
If you encounter a software problem during installation, see the topics below for a possible solution. If you encounter a hardware problem during installation, see Hardware setup troubleshooting.
During a normal installation of the HP All-in-One software, the following things occur: The HP All-in-One CD-ROM runs automatically The software installs Files are copied to your hard drive You are requested to plug in the HP All-in-One A green OK and check mark appear on an installation wizard screen You are requested to restart your computer (most systems) The registration process runs
If any of these things did not occur, there might be a problem with the installation. To check the installation on a Windows computer, verify the following: Start the HP Director (or HP Solution Center) and check to make sure the following icons appear: Scan Picture, Scan Document, and HP Image Zone. For information on starting HP Director (or HP Solution Center), see the onscreen HP Image Zone Help that came with your software. If the icons do not appear immediately, you might need to wait a few minutes for the HP All-in-One to connect to your computer. Otherwise, see Some of the icons are missing in the HP Director (or HP Solution Center). Open the Printers dialog box and check to see that the HP All-in-One is listed. Look in the system tray at the far right of the Windows taskbar for an HP All-inOne icon. This indicates that the HP All-in-One is ready.
When the software installation is complete, the Status Monitor icon appears in the Windows system tray. To verify that the software is properly installed, double-click the HP Director (or HP Solution Center) icon on the desktop. If the HP Director (or HP Solution Center) shows the essential icons (Scan Picture, Scan Document, and HP Image Zone), the software has been properly installed. To uninstall from a Windows computer, method 2 Note Use this method if Uninstall Software is not available in the Windows Start menu. 1. 2. 3. 4. 5. On the Windows taskbar, click Start, Settings, Control Panel. Double-click Add/Remove Programs. Select HP PSC & OfficeJet 4.5, and then click Change/Remove. Follow the onscreen instructions. Disconnect your HP All-in-One from your computer. Restart your computer. Note It is important that you disconnect your HP All-in-One before restarting your computer. Do not connect the HP All-in-One to your computer until after you have reinstalled the software. 6. 7. Launch setup. Follow the onscreen instructions and the instructions provided in the Setup Guide that came with your HP All-in-One.
To uninstall from a Windows computer, method 3 Note This is an alternate method if Uninstall Software is not available in the Windows Start menu. 1. 2. 3. 4. Run the HP PSC 1500 All-in-One series software Setup program. Select Uninstall and follow the onscreen directions. Disconnect your HP All-in-One from your computer. Restart your computer. Note It is important that you disconnect your HP All-in-One before restarting your computer. Do not connect the HP All-in-One to your computer until after you have reinstalled the software. 5.
User Guide Troubleshooting information
Run the HP PSC 1500 All-in-One series software Setup program again.
Launch Reinstall. Follow the onscreen instructions and the instructions provided in the Setup Guide that came with your HP All-in-One.
To uninstall from a Mac computer 1. Disconnect the HP All-in-One from your Mac. 2. Double-click the Applications: HP All-in-One Software folder. 3. Double-click HP Uninstaller. Follow the onscreen instructions. 4. After the software is uninstalled, disconnect your HP All-in-One, and then restart your computer. Note It is important that you disconnect your HP All-in-One before restarting your computer. Do not connect the HP All-in-One to your computer until after you have reinstalled the software. 5. 6. 7. To reinstall the software, insert the HP All-in-One CD-ROM into your computers CD-ROM drive. On the desktop, open the CD-ROM and then double-click HP all-in-one installer. Follow the onscreen instructions and the instructions provided in the Setup Guide that came with your HP All-in-One.
Device update (Windows)
Use one of the following to retrieve an update for your device: Use your Web browser to download an update for your HP All-in-One from www.hp.com/support. The file will be a self-extracting executable with the extension.exe. When you double-click the.exe file, the Device Update Wizard opens on your computer. Use the Software Update utility, provided with the HP Image Zone software, to automatically search the HP support website for device updates at predetermined intervals. For more information on the Software Update utility, see the HP Image Zone Help. Tip After the Software Update utility is installed on your computer, it searches for device updates. If you do not have the latest version of the Software Update utility at the time of install, a dialog appears on your computer prompting you to upgrade. Accept the upgrade. Note If you installed the HP Image Zone Express software, the update utility is called Update. The button that opens the Update utility is located in the upper left corner of the software window.
To use device update 1. Do one of the following: Double-click the update.exe file you downloaded from www.hp.com/support. When prompted, accept the device update found by the Software Update utility. The Device Update Wizard opens on your computer. 2. At the Welcome screen, click Next. The Select a Device screen appears. 3. Select your HP All-in-One from the list, and then click Next. The Important Information screen appears. 4. Make sure your computer and device meet the requirements listed. 5. If you meet the requirements, click Update. A progress bar or other such designator displays. 6. Do not disconnect, shut down, or otherwise disturb your device while the update is occurring. Note If you disrupt the update, or an error message indicates the update failed, call HP support for assistance. After your HP All-in-One restarts, the Update Complete screen appears on your computer and a test page prints from your device. Your device is updated. It is now safe to use your HP All-in-One.
Device update (Mac)
The device update installer provides a means to apply updates to your HP All-in-One as follows: 1. 2. 3. 4. Use your Web browser to download an update for your HP All-in-One from www.hp.com/support. Double-click the downloaded file. The installer opens on your computer. Follow the onscreen prompts to install the update to your HP All-in-One. Restart the HP All-in-One to complete the process.
Get HP support
Hewlett-Packard provides Internet and phone support for your HP All-in-One. This chapter provides information on how to get support from the Internet, contact HP customer support, access your serial number and service ID, call in North America during warranty, call HP Japan customer support, call HP Korea customer support, call elsewhere in the world, call Australia post-warranty, and prepare your HP All-in-One for shipment. If you are unable to find the answer you need in the printed or onscreen documentation supplied with your product, you can contact one of the HP support services listed in the following pages. Some support services are available only in the U.S. and Canada, while others are available in many countries/regions worldwide. If a support service number is not listed for your country/ region, contact your nearest authorized HP dealer for help.
Reset your HP All-in-One:
For more information, go to www.hp.com/support. This website offers technical support, drivers, supplies, and ordering information. If you are still experiencing problems and need to speak with an HP Customer Support Representative, do the following: a. b. c. d. e. Have the specific name of your HP All-in-One, as it appears on the control panel, available. Print a self-test report. For information on printing a self-test report, see Print a self-test report. Make a color copy to have available as a sample printout. Be prepared to describe your problem in detail. Have your serial number and service ID ready. For information on how to access your serial number and service ID, see Access your serial number and service ID.
Call HP Customer Support. Be near your HP All-in-One when you call.
Access your serial number and service ID
You can access the serial number and service ID for your HP All-in-One by printing a self-test report. Note If you cannot turn on your HP All-in-One, you can view the serial number by looking at the sticker above the rear clean-out door. The serial number is the 10character code in the upper left corner of the sticker. To print a self-test report 1. 2. Press and hold Cancel / Resume on the control panel. While holding Cancel / Resume, press Start Copy Color. The self-test report prints, containing the serial number and service ID.
Call in North America
Call 1-800-474-6836 (1-800-HP invent). US phone support is available in both English and Spanish languages 24 hours a day, 7 days a week. Canada phone support is available in both English and French languages 24 hours a day, 7 days a week. Days and hours of support may change without notice. This service is free during the warranty period. A fee may apply outside the warranty period.
Call elsewhere in the world
The numbers listed below are current as of the publication date of this guide. For a list of current international HP Support Service numbers, go towww.hp.com/support and choose your own country/region or language. You can call the HP support center in the following countries/regions. If your country/region is not listed, contact your local dealer or nearest HP Sales and Support Office to find out how to obtain services. Support service is free during the warranty period; however, your standard long-distance phone charges will apply. In some cases, a flat fee per single incident will also apply. For phone support in Europe, please check for the details and conditions of phone support in your country/region by going to www.hp.com/support. Alternatively, you can ask your dealer or call HP at the phone number provided in this guide. As part of our constant efforts to improve our phone support service, we advise you to check our website on a regular basis for new information regarding service features and delivery. Country/Region Algeria
The HP All-in-One meets product requirements from regulatory agencies in your country/region. This section provides information on the regulatory model identification number for your HP All-inOne; an FCC statement; and separate notices to users in Australia, Japan, and Korea.
Regulatory model identification number
For regulatory identification purposes, your product is assigned a Regulatory Model Number. The Regulatory Model Number for your product is SDGOB-0502. This regulatory number should not be confused with the marketing name (HP PSC 1500 All-in-One series) or other product numbers.
The United States Federal Communications Commission (in 47 CFR 15.105) has specified that the following notice be brought to the attention of users of this product. Declaration of Conformity: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Class B limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
For more information, contact the Product Regulations Manager, Hewlett-Packard Company, San Diego, (858) 655-4100. The user may find the following booklet prepared by the Federal Communications Commission helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington DC, 20402. Stock No. 004-000-00345-4. Caution Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this equipment not expressly approved by the Hewlett-Packard Company may cause harmful interference and void the FCC authorization to operate this equipment.
(continued) Nederland Hewlett-Packard Nederland BV Startbaan XR Amstelveen NL France Hewlett-Packard France 1 Avenue du Canada Zone d'Activite de Courtaboeuf F-91947 Les Ulis Cedex Portugal Hewlett-Packard Portugal Sistemas de Informtica e de Medida S.A. Edificio D. Sancho I Quinta da Fonte Porto Salvo 2780-730 Paco de Arcos P-Oeiras Deutschland Hewlett-Packard GmbH Herrenberger Strae 110-140 D-71034 Bblingen sterreich Hewlett-Packard Ges.m.b.H. Lieblgasse 1 A-1222 Wien Espaa Hewlett-Packard Espaola S.L. C/ Vicente Aleixandre 1 Parque Empresarial Madrid - Las Rozas 28230 Las Rozas E-Madrid Suomi Hewlett-Packard Oy Piispankalliontie 17 FIN-02200 Espoo Greece Hewlett-Packard Hellas E.E. Voriou Epirou 25 Maroussi Athens Italia Hewlett-Packard Italiana S.p.A Via G. Di Vittorio Cernusco sul Naviglio I-Milano United Kingdom Hewlett-Packard Ltd Cain Road Bracknell GB-Berks RG12 1HN Polska Hewlett-Packard Polska Sp. z o.o. ul. Szturmowa 2A 02678 Warszawa Wpisana do rejstru przedsiebiorcow w Sadzie Rejonowym dla m.st. Warszawy, XX Wydzial Gospodarczy pod numerem KRS 0000016370 Latvia Hewlett-Packard SIA Palasta iela 7 Riga, LV-1050 Estonia HP Oy Eesti Filiaal Estonia pst. 1 EE-10143 Tallinn tel +Sverige Hewlett-Packard Sverige AB Skalholtsgatan 9 S-Kista Hewlett-Packard LIMITED WARRANTY STATEMENT
Hungary Hewlett-Packard Magyarorszg Kft. 1117 Budapest Neumann J. u. 1. Slovensk republika Hewlwtt-Packard Slovakia, s.r.o. Miletiova 00 Bratislava
Lietuva UAB Hewlett-Packard eimyniki g. 21B 09200 Vilnius eska republika HEWLETT-PACKARD s.r.o. Vyskoilova 1/21 Praha 4
Chapter 15 (continued) fax +Slovenia Hewlett-Packard d.o.o. Tivolska cesta Ljubliana Cyprus/Kibris Hewlett-Packard Hellas E.E. Voriou Epirou 25 Maroussi Athens, Greece Malta Hewlett-Packard Europe B.V. Amsterdam, Meyrin Branch 150, Route de Nant d'Avril 1217 Meyrin, Geneva Switzerland
Symbols/Numerics 10 x 15 cm photo paper load x 6 inch photo paper load 16 A A4 paper load 15 align print cartridges 48 B best copy quality 24 borderless copies 10 x 15 cm (4 x 6 inch) photo 25 C camera port. See PictBridge port cancel copy 26 print job 29 scan 32 cancel button 4 cartridges. See print cartridges clean exterior 42 glass 41 lid backing 41 print cartridges 49 connection types supported printer sharing 11, 12 USB 11 control panel overview 4 copy black-and-white documents 25 cancel 26 copy specifications 77 number of copies 24 paper types, recommended 23 quality 24 speed 24 customer support Australia 71 contact 68 HP Quick Exchange Service (Japan) 72 Japan 72 Korea 71 North America 68 outside U.S. 69 serial number 68 service ID 68 website 67 D declaration of conformity European Economic Area 83 device update Mac 65 overview 64 Windows 64 digital camera PictBridge 21 E envelopes load 18 Environmental product stewardship program 79 environmental specifications 79 F fast copy quality 24 FCC statement 81 fit to page 26 G glass clean 41 load original greeting cards load 18 H Hagaki cards load 17 HP All-in-One overview 3 prepare to ship 72 HP Director HP Instant Share 36 Mac 6 missing icons 59 start (Windows) 6 HP Image Zone HP Instant Share 34, 35, 36 Mac 6, 35, 36 overview 6 Windows 6, 34 HP Instant Share about 33 e-mail photos from the HP Image Zone (USB) 34 HP Image Zone 34 send images from HP Image Zone (USB) 34 send to a device 34 setup (USB) 34 HP JetDirect 11 HP Support before you call 51 I ink cartridges. See print cartridges ink levels, check 42 inkjet supplies recycling 80 Instant Share. See HP Instant Share iron-on transfers load 18 J jams, paper 19, 63 L labels load 18 legal paper load 15
Product environmental attributes - IT ECO Declaration 2003
Brand Manufacturer Manufacturers representative Contact person Postal address Postal code /City/ Country Telephone (incl. country code) Mobile phone (incl. country code) Fax (incl. country code) Internet site Additional information
Hewlett-Packard Hewlett-Packard Name: email: firstname.lastname@example.org Name: Hans Wendschlag, HP Sweden email:
Latest version of this document can be found at: www.hp.se/itecodeclarations. The company environmental profile, which is issued for the company and isn't product related, can also be found at the same website. Check Item 14 for explanatory information regarding specific item responses.
This declaration covers the below listed Information Technology product categories* with specified product identity (ID) such as type/model number.
Computer System Unit (CPU) Display/Monitor Printer Black/white Product Identity Copier Fax Color Mobile/Portable Computer Keyboard Multifunction product Pages per minute: Scanner Server
Other product, specify:
HP PSC 1500 All-in-One Series,Product (Q5888A, Q5889A) RMN SDGOB-0502 Models PSC1510(Q5880A,B, Q5886C), PSC 1513(Q5880C), PSC 1508(5880D), PSC 1510x i(Q5881A), PSC 1510V(5882A), PSC 1507(Q5883A,B) PSC 1503(Q5883C), PSC 1504(Q5884B), PSC 1514(Q5885B)
Version of Guideline document used for completion of this declaration (yyyy-mm-dd):
2003-09-01 *For Telecommunication products, use special ECO declarations found at:
This IT ECO Declaration consists of three documents: Company Environmental Profile Divided in to two sections; Legal and Market requirements Product Environmental Attributes Divided in to two sections; Legal and Market requirements and Guideline document with extensive clarifications, comments and references.
The latest version of all these documents can be downloaded from: Notes:
Voluntary vs compulsory requirements: Items marked V are voluntary to answer, all other items must be answered.
The latest version of the Guideline document must be used. Specify in table above according to which version of the guideline document this declaration has been
This version of the IT ECO Declaration is adjusted to the document Product-related Environmental Attributes, issued by the European Association for Standardizing
Information and Communication Systems (ECMA), TR/70, version 1999.
This version of the IT ECO Declaration meets the basic principles of ISO14021:1999, Environmental labels and declarations Self-declared environmental claims (Type
II environmental labelling).
This IT Eco Declaration version can be used from October 1
and shall be used for products announced after December 1
The IT Eco Declaration is a system for declaration of environmental aspects of IT and Telecom products, developed by the Nordic IT organisations, ITB in Denmark, IKT-Norge in Norway and IT-Fretagen in Sweden. This IT Eco Declaration may only be used after having signed a contract with at least one of these organisations.
Association of the Swedish IT and Telecom Industry www.itforetagen.se
Norwegian IT-companies Organisation www.ikt-norge.no
IT-Brancheforeningen Kontor & Data www.itb.dk
Template version September 2003
HP PSC 1500 All-in-One Series
Models PSC1510(Q5880A,B, Q5886 Page 1 (4)
Copyright Association of the Swedish IT and Telecom Industry 2000. Reproduction of this form without permission is prohibited by the copyright law 1960:729. The prohibition includes any kind of reproduction, by electronic or any other means.
Product environmental attributes Item P1 P1.1 P1.2 P1.3 P1.4 P1.5 P1.6 P2 P2.1 P2.2 P3 P3.1 P3.2 P3.3 P3.4 P4 P4.1 P4.2 P4.3 P5 P5.1 P5.2
Legal requirements Requirement met Yes No n.a.
Environmental conscious design The product is free from, i.e. less than 0.1% by weight (b.w.), CFCs& HCFCs, asbestos and PCB & PCT (3093/94/EEC, 76/769/EEC, 6th amendment, 99/77/EEC, 82/828/EEC) Components are free from, i.e. less than 0.1% b.w., mercury (Hg), except for small amounts of mercury which are allowed in light sources. (SE SFS 1998:944) Cadmium (Cd) content of colorants, stabilizers, and surface treatments does not exceed, 0.01% b.w., as specified in 76/769/EEC, 10th amendment, 1991/338/EEC. Paints are free from lead (Pb), i.e. less than 0.1% b.w., (76/769/EEC, 8th amendment, 89/677/EEC) Paints, coatings, plastics, rubbers and seals are free from flame retardants and / or plasticizers containing Short Chain Chlorinated Paraffines (SCCPs) with more than 0,1% by weight, 10-13 carbon atoms, minimum 48% chlorine by weight, CAS number 63449-39-8 (NO MVD regulation 1544, 2000.12.13 If the product is intended for direct and prolonged skin contact, the surfaces do not release nickel (Ni) above levels specified in (76/769/EEC, 8th amendment, 94/27/EEC) Batteries If hazardous batteries are used in the product, they are labelled. (93/86/EEC). If batteries are used in the product they are free (<0.0005% by weight) from mercury (Hg) (98/101/EC) Electrical safety, EMC and connection to the telephone network The product meets the Low Voltage Directive (LVD) regarding electrical safety (73/23/EEC & 93/68/EEC) The product meets the EMC Directive regarding electromagnetic compatibility (89/336/EEC) If product is intended for connection to a public telecom network or contains a radio transmitter, it meets the EU R&TTE Directive (1999/5/EC) The product is CE-marked (93/68/EEC) Consumable materials If a photo conductor (drum, belt etc.) is used in the product, it is free (<0.01% by mass) from cadmium (Cd) (76/769/EEC and 91/338/EEC) If an ink is used in the product, it is free (<0.01% by mass) from cadmium (Cd) (91/338/EEC) If toner/ink (or corresponding) are used in the product, they are classified and if required labelled in accordance with EU directives 99/45/EEC and 2001/58/EEC Packaging materials The sum of the concentration levels of lead, cadmium, mercury, and hexavalent chromium present in packaging or packaging components does not exceed 0.01% by weight (100 ppm). (94/62/EC). The product packaging material is free from CFC/HCFC.
This product meets above listed legal requirements
Product identity: HP PSC 1500 All-in-One Series
Page 2 (4) SDGOB-0502 Models PSC15
Product environmental attributes - Market requirements Item P6 Requirement met V = Voluntary to answer. Yes No n.a. Environmental conscious design Disassembly, recycling Glueing / welding of different material has been avoided Plastic materials in covers / housing have not been surface coated. Mechanical plast ic parts >100g, consist of one material or of easily separable materials. Plastic parts >25g, have material codes according to ISO 11469, which inc ludes ISO 1043, part 1-4
P6.1 P6.2 P6.3 P6.4 P6.5 P6.6
Plastic parts are free from metal inlays that cannot be removed by one man alone with commonly available tools. If labels are required they should be separable. (This requirement does not apply to safety labels.) Product lifetime Upgrading of the product can be done with commonly avai lable tools Processor, memory and cards of various types can be changed/upgraded. Hard disk, CD/DVD drives and / or f loppy drive can be changed/upgraded. Spare parts are available after end of production for Material requirements years
P6.7 P6.8 P6.9 P6.10
Plastic parts >25g are free from PBB/PBDE, i.e less than 0.1% b.w. Plastic parts >25g are free from f lame retardant substances/preparations above 0.1% classified as R45/46, R50/ 51/52/53 and R60/61 (67/548/EEC) Chemical specif ication of f lame retardants in plast ic parts over 25g according to ISO 1043-4:
Product cover/ housing: Not Flame Retarded
Other plastic parts: Not Flame Retarded
Printed c ircuit boards: Not Fl ame Retarded
Product cover/housing material type, specif ied according to ISO 1043-1 P6.14
Material type Material type Material type
Electrical cable insulation material specif ication Light sources are free from mercury, i.e less than 0.1% b.w. If mercury is used specify: Number of lamps
& Max. Mercury per lamp (mg)
P6.17 P6.18 P7 P7.1 P7.2 P8 P8.1
Mechanical plast ic parts > 25g are free from lead (Pb), i.e. less than , 0.1% b.w. Product is free from beryllium (Be) and beryllium oxide (BeO), i.e. less than 0.1% b.w. Batteries Product is free from batteries def ined as hazardous (91/157/EEC) Batteries are used that meet the EU Eco-label criteria (2001/687/EC & 2001/686/EC) Energy Consumption Maximum power: Low Power mode: 9.3 W W W Operation: Off mode: Deep sleep mode: min.; min.; Sleep mode in: Off mode in: N/A 6.9 W W W min.; min. V Value V V
8.6 Sleep mode: If Product is in Stand by mode, it reverts to: Low power mode in Deep sleep mode in: P8.2
Automatic 2-sided printing/ copying from 1-sided originals. Information about the energy save function is given in the user documentation. (Not applicable when no instruction is needed to operate the energy save function, i.e. the energy save function cannot be adjusted or inhibited by the user.) The product meets the requirements of ENERGY STAR. The product meets the requirements of GEEA. Display meets the energy save requirements of EU Eco-label (2001/ 686/EC & 2001/687/EC). Desktop or portable computer meets the energy save requirements of EU Eco-label (2001/686/EC & 2001/687/EC) V V V
P8.3 P8.4 P8.5 P8.6
2 Models PSC1510(Q5880A,B, Q58 Page 3 (4)
Item P9 P9.1 P9.2
Requirement met V = Voluntary to answer. Yes No n.a. Noise characteristics (Measured and declared according to ISO 7779 and ISO 9296) Declared A-Weighted Sound Power Level, LW Ad (1B = 10 dB) 6.7 bels Operating Mode: LWAd : Idling Mode: B The product meets the acoustic noise requirement of: The product meets the acoustic noise requirement of: The product meets the acoustic noise requirement of: TCO Blue Angel EU Flower Value V V V V
L WAd :
The product meets the acoustic noise requirement of: Nordic Swan Declared A-Weighted Sound Pressure Level, LpAm (measured at the Operator Position if applicable; otherwise measured at the 1m Bystander Positions). For PC tower, check the test to determine LpAm : table top floor standing Check the test used to detemine LpAm : operator position bystander position Operating Mode: LpAm: dB Idling Mode: L pAm : dB Emissions Chemical emissions Dust: < 0.006 mg/m , tested according to:
Specify: V V V
Meets the dust emission requirements of: Meets the dust emission requirements of: Meets the dust emission requirements of: P10.2 Ozone: < 0.001 mg/m , tested according to:
TCO Blue Angel Nordic Swan
Meets the ozone emission requirements of: Meets the ozone emission requirements of: Meets the ozone emission requirements of: P10.3 Styrene: < 0.001 mg/m , tested according to:
Meets the styrene emission requirements of: Meets the styrene emission requirements of:
TCO Blue Angel
P11 P11.1 P11.2 P11.3 P11.4 P12 P12.1 P12.2 P12.3 P13
Meets the styrene emission requirements of: Nordic Swan Electromagnetic emissions Display/monitor/portable computer meets the requirement for low frequency electromagnetic fields in: MPR-II Display/monitor/portable computer meets the requirement for low frequency electromagnetic fields in: TCO Display/monitor/portable computer meets the requirement for low frequency electromagnetic fields in: -A, prEN50279 Consumable Materials The photo conductor is free from selenium. If the photo conductor contains selenium there is a system for waste recovery. Safety data sheet/Material Safety Data Sheet (SDS / MSDS) is available for toner/ ink (99/45/EC & 2001/58/EC) Paper containing recycled fibres and meeting the requirements of ENV 12281:1996, can be used in the product. Ergonomics The computer system meets the ergonomic requirements of EN 29241-3, -7, -8 for CRT displays and EN-ISO 13406-2 for flat panel displays. The product keyboard meets the requirements of ISO 9995 and EN 29241-4. The computer input device meets the requirements of ISO 9241 part 9. Packaging Product Packaging: Material Type: Material Type: Material Type: Material Type: Corrugated Paper Polystyrene Polyethylene Composite Plastic weight: weight: weight: weight:
0.59kg 0.02 kg 0.02 kg 0.01 kg
kg kg kg kg V V V Value
Product Packaging: Product Packaging: Product Packaging:
P13.2 P13.3 P13.4 P14
Plastic packaging material is marked according to DIN 6120, ISO 11469 or ISO 1043,1-4. Product plastic packaging is free from chlorine User and product documentation are free from chlorine bleached paper Additional Information
"The IT Eco Declaration covers the product base model only. If optional items with moving parts are added, like extra hard disks or graphic cards with fans etc, these can change energy and acoustics values for which HP can take no responsibility." 0 anto
Product identity: HP
PSC 1500 All-in-One Series
els Page 4 (4) PSC1510(Q5880A,B, Q5886
DVR 522 XM-ZR604 Switch AVD-K800P VE1020 Network Fazer ABS 127-3 LS1902C AXT847 BDP-BX37 GR-B207flqa ZDT6053 UE-32C6000 SCX-4828FN XEV Nokia 1325 AAC5040 PCG-GRT785B VGN-AR61E Armada E500 6321-20 DX100 Boot Camp YT-150 42PF9630A IRC3580 SCP-8100 DMC-LZ7 Accent MIC200 YP-T9BAB Kgna 335 NAD T761 XR-CA660X KX-TG1311NE Driver Download CHH 8000 WE BOX 7530G Series Ink VP-DC171W RC1600 21FS7RL FAV675I-d EF 310000 World LFX25960ST KOR-631G DVD-SR150M MCM395 AW2127S F150-2001 Printer SA-AK22 LG Wave DTM40 AJ-D215 1 8G CR-334 MRV-F405 VH745XZ1 Software Slide NP-X11 Suunto M2 PSW112 SCP-7000 87128iss7 DRX6675Z BDP-S770 VPC-C5EX LN-505 PMH2000 KX-FP155GRW MC-EU1 CFD-G55 KDG820J-kd-g820 DI 183 F18316S Syncmaster 153V Colorist S3550 DSC-T100 250 X CS5200 2 8D GEM-P800 Series SGH-X560 Microtower PC Printer Windows 7 Camera LX-850 J110I HS-55W Express 8 ET 2400 ESD 9270 ICD-U70 TCM-5000EV HT-3000 K200I BB420 SR7400 Roland W-30 WD1009
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101