HP PSC 1500 All-in-One series

User Guide

Copyright 2004 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under copyright laws.
It is not lawful in many places to make copies of the following items. When in doubt, check with a legal representative first. Governmental paper or documents: Passports Immigration papers Selective service papers Identification badges, cards, or insignias
If the product does not operate normally, see the online Troubleshooting help. No operator-serviceable parts inside. Refer servicing to qualified service personnel. Use in a well-ventilated area. Warning This equipment will be inoperable when main power fails.
Governmental stamps: Postage stamps Food stamps
Adobe and the Acrobat logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Portions Copyright 1989-2004 Palomar Software Inc. The HP PSC 1500 All-in-One series includes printer driver technology licensed from Palomar Software, Inc. www.palomar.com. Windows, Windows NT, Windows Me, Windows XP, and Windows 2000 are U.S. registered trademarks of Microsoft Corporation. Intel and Pentium are registered trademarks of Intel Corporation. Energy Star and Energy Star logo are US registered marks of the United States Environmental Protection Agency. Publication number: Q5888-90191 First edition: December 2004
Checks or drafts drawn on Governmental agencies Paper currency, travelers checks, or money orders Certificates of deposit Copyrighted works

Safety information

Warning To prevent fire or shock hazard, do not expose this product to rain or any type of moisture. Always follow basic safety precautions when using this product to reduce risk of injury from fire or electric shock. Warning hazard 1. 2. Potential shock

Notice

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. The Hewlett-Packard Company shall not be liable for incidental or consequential damages in connection with, or arising out of the furnishing, performance, or use of this document and the program material which it describes. Note: Regulatory information can be found in the technical information chapter of this guide.

4. 5. 6. 7.

Read and understand all instructions in the Setup Guide. Use only a grounded electrical outlet when connecting the device to a power source. If you do not know whether the outlet is grounded, check with a qualified electrician. Observe all warnings and instructions marked on the product. Unplug this product from wall outlets before cleaning. Do not install or use this product near water or when you are wet. Install the product securely on a stable surface. Install the product in a protected location where no one can step on or trip over the line cord, and where the line cord will not be damaged.

Contents

HP All-in-One overview...3 The HP All-in-One at a glance...3 Control panel overview...4 Status light overview....5 Use the HP Image Zone to do more with your HP All-in-One..Find more information... Connection information...11 Supported connection types...11 Connect using a USB cable....11 Use printer sharing (Windows)....11 Use printer sharing (Mac OS X)...Load originals and load paper...13 Load an original....13 Choose papers for printing and copying...14 Load paper....15 Avoid paper jams...Use a PictBridge camera... 21 Connect a digital camera...21 Print photos from a digital camera..Use the copy features...23 Set the copy paper type...23 Increase copy speed or quality....24 Make multiple copies of the same original..24 Copy a two-page document....25 Make a borderless copy of a photo...25 Resize an original to fit onto letter or A4 paper...26 Stop copying....Print from your computer....27 Print from a software application...27 Change the print settings...28 Stop a print job....Use the scan features.... 31 Scan to an application...31 Stop scanning...Use HP Instant Share....33 Overview....33 Get started...34 Send images using your computer...Order supplies....39 Order paper, transparency film, or other media..39 Order print cartridges....39 Order other supplies...Maintain your HP All-in-One...41 Clean the HP All-in-One....41 Check the estimated ink levels....42

User Guide 1

Print a self-test report...42 Work with print cartridges...Troubleshooting information....51 Before you call HP Support....51 View the Readme file....52 Setup troubleshooting...52 Operational troubleshooting....62 Device update...Get HP support....67 Get support and other information from the Internet..67 Warranty support...67 HP customer support....68 Access your serial number and service ID.. 68 Call in North America....68 Call elsewhere in the world...69 Call in Australia under warranty and post-warranty...71 Call HP Korea customer support...71 Call HP Japan support...72 Prepare your HP All-in-One for shipment...Technical information...75 System requirements....75 Paper specifications...75 Print specifications...77 Copy specifications....77 Scan specifications....78 PictBridge specifications....78 Physical specifications...78 Power specifications...79 Environmental specifications...79 Additional specifications....79 Environmental product stewardship program..79 Regulatory notices...80 Declaration of conformity (European Economic Area)..Hewlett-Packard LIMITED WARRANTY STATEMENT..85 Duration of limited warranty....85 Extent of limited warranty...85 Limitation of warranty...86 Limitation of liability....86 Local law.... 86 Limited warranty information for EU countries/regions...86 Index.....89

HP All-in-One overview

Many HP All-in-One functions can be accessed directly, without turning on your computer. Tasks such as making a copy or printing photos from a camera can be accomplished quickly and easily from your HP All-in-One. This chapter describes the HP All-in-One hardware features, control panel functions, and how to access the HP Image Zone software. Tip You can do more with your HP All-in-One by using the HP Image Zone software installed on your computer. The software provides enhanced copy, scan, and photo functionality. For more information, see the onscreen HP Image Zone Help and Use the HP Image Zone to do more with your HP All-inOne.

Paper HP papers

Tips HP Premium Paper: Locate the gray arrow on the nonprinting side of the paper, and then slide the paper into the paper tray with the arrow side facing up. HP Premium Inkjet Transparency Film: Insert the film so that the white transparency strip (with arrows and the HP logo) is on top and is going into the paper tray first. (For printing from a software application only.) Note The HP All-in-One cannot automatically detect transparency film. For best results, set the paper type in the software application to transparency film before printing onto transparency film. HP Iron-On Transfers: Flatten the transfer sheet completely before using it; do not load curled sheets. (To prevent curling, keep transfer sheets sealed in the original package until you are ready to use them.) Locate the blue stripe on the nonprinting side of the transfer paper and then manually feed one sheet at a time into the paper tray with the blue stripe facing up. (For printing from a software application only.) HP Matte Greeting Cards, HP Photo Greeting Cards, or HP Textured Greeting Cards: Insert a small stack of HP greeting card paper into the paper tray with the print side down; slide the stack of cards forward until it stops. (For printing from a software application only.)
Labels (for printing from a software application only)
Always use letter or A4 label sheets designed for use with HP inkjet devices, and make sure that the labels are no more than two years old. Labels on older sheets might peel off when the HP All-in-One, causing paper jams. 1. 2. Fan the stack of labels to make sure none of the pages are sticking together. Place a stack of label sheets on top of full-size plain paper in the paper tray, label side down. Do not insert labels one sheet at a time.

Avoid paper jams

To help avoid paper jams, follow these guidelines: Prevent curled or wrinkled paper by storing all unused paper flat in a resealable bag. Remove printed papers from the paper tray frequently. Ensure that paper loaded in the paper tray lays flat and the edges are not bent or torn. Do not combine different paper types and paper sizes in the paper tray; the entire stack of paper in the paper tray must be the same size and type. Adjust the paper-width guide in the paper tray to fit snugly against all paper. Make sure the paper guide does not bend the paper in the paper tray.

Normal (two stars): delivers high-quality output and is the recommended setting for most of your copying. Normal copies faster than Best. Best (three stars): produces the highest quality for all paper and eliminates the banding (striping) effect that sometimes occurs in solid areas. Best copies slower than the other quality settings.
To change the copy quality from the control panel 1. Make sure you have paper loaded in the paper tray. 2. Load your original face down on the right front corner of the glass. 3. Press the Quality button to select fast (one star), normal (two stars), or best (three stars). 4. Press Start Copy Black or Start Copy Color.
Make multiple copies of the same original
You can set the number of copies from the control panel or from the HP Image Zone software. To make multiple copies of an original from the control panel 1. Make sure you have paper loaded in the paper tray. 2. Load your original face down on the right front corner of the glass. 3. Press the Copies button to increase the number of copies up to a maximum of 9. Tip Use the HP Image Zone software to set the number of copies higher than 9. If the number of copies is greater than 9, only the last digit of the number of copies is displayed on the control panel. 4. Press Start Copy Black or Start Copy Color. In this example, the HP All-in-One makes six copies of the original 10 x 15 cm (4 x 6 inch) photo.

Copy a two-page document

You can use the HP All-in-One to copy a single- or multiple-page document in color or black and white. In this example, the HP All-in-One is used to copy a two-page blackand-white original.
To copy a two-page document from the control panel 1. Make sure you have paper loaded in the paper tray. 2. Load the first page of your original face down on the right front corner of the glass. 3. Press Start Copy Black. 4. Remove the first page from the glass and load the second page. 5. Press Start Copy Black.
Make a borderless copy of a photo
For the best quality when copying a photo, load photo paper in the paper tray and then use the Type button to select Photo Paper. You might also want to use the photo print cartridge for superior print quality. With the tri-color and photo print cartridges installed, you have a six-ink system. For more information, see Use a photo print cartridge. To copy a photo from the control panel 1. Load photo paper in the paper tray. Note In order to make a borderless copy, you must have photo paper loaded. 2. Load your original photo face down on the right front corner of the glass. Position the photo on the glass so the long edge of the photo is along the front edge of the glass. Press the Type button to select Photo Paper. Note When Photo Paper is selected, the HP All-in-One defaults to the Borderless setting. 4. Press Start Copy Color.

Chapter 6

The HP All-in-One makes a borderless copy of your original photo, as shown below.
Resize an original to fit onto letter or A4 paper
If the image or text on your original fills the entire sheet with no margins, use the Resize to Fit setting to reduce your original and prevent unwanted cropping of the text or images at the edges of the sheet.
Tip You can also use Resize to Fit to enlarge a small photo to fit within the printable area of a full-size page. In order to do this without changing the proportions of the original or cropping the edges, the HP All-in-One might leave an uneven amount of white space around the edges of the paper. To resize a document from the control panel 1. Make sure you have paper loaded in the paper tray. 2. Load your original face down on the right front corner of the glass. 3. Press the Size button to select Resize to Fit. 4. Press Start Copy Black or Start Copy Color.

Stop copying

To stop copying, press Cancel / Resume on the control panel.

Print from your computer

The HP All-in-One can be used with any software application that allows printing. The instructions vary slightly depending on whether you are printing from a Windows computer or a Mac. Make sure you follow the instructions for your operating system in this chapter. In addition to the printing capabilities described in this chapter, you can print special print jobs such as borderless prints and newsletters; print images directly from a digital camera that supports PictBridge; and use scanned images in printing projects in the HP Image Zone. For more information on printing from a digital camera, see Use a PictBridge camera. For more information on performing special print jobs or printing images in the HP Image Zone, see the onscreen HP Image Zone Help.
Print from a software application
Most print settings are automatically handled by the software application you are printing from or by HP ColorSmart technology. You need to change the settings manually only when you change print quality, print on specific types of paper or transparency film, or use special features. To print from the software application you used to create your document (Windows) 1. Make sure you have paper loaded in the paper tray. 2. On the File menu in your software application, click Print. 3. Select the HP All-in-One as the printer. 4. If you need to change settings, click the button that opens the Properties dialog box. Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer, or Preferences. 5. Select the appropriate options for your print job by using the features available in the Paper/Quality, Finishing, Effects, Basics, and Color tabs. Tip You can easily select the appropriate options for your print job by choosing one of the predefined print tasks on the Printing Shortcuts tab. Click a type of print task in the What do you want to do? list. The default settings for that type of print task are set, and summarized on the Printing Shortcuts tab. If necessary, you can adjust the settings here, or you can make your changes on the other tabs in the Properties dialog box. 6. 7. Click OK to close the Properties dialog box. Click Print or OK to begin printing.

Scan to an application

You can scan originals placed on the glass directly from the control panel. 1. 2. Load the original face down on the right front corner of the glass. Press Start Scan on the control panel. A preview image of the scan appears in the HP Document Viewer window on the computer, where you can edit it. For more information on editing a preview image, see the onscreen HP Image Zone Help that came with your software. Make any edits to the preview image in the HP Scan window. When you have finished, click Accept. The HP All-in-One sends the scan to the HP Image Zone software, which automatically opens and displays the image.

Chapter 8

The HP Image Zone has many tools that you can use to edit your scanned image. You can improve the overall image quality by adjusting the brightness, sharpness, color tone, or saturation. You can also crop, straighten, rotate, or resize the image. When the scanned image looks just the way you want it, you can open it in another application, send it through e-mail, save it to a file, or print it. For more information on using the HP Image Zone, see the onscreen HP Image Zone Help.

Stop scanning

To stop scanning, press the Cancel / Resume button on the control panel, or in the HP Image Zone software, click Cancel.

Use HP Instant Share

HP Instant Share makes it easy to share photos with family and friends. Using the HP Image Zone software installed on your computer, select one or more photos to share, select a destination for your photos, and then send the photos on their way. You can even upload your photos to an online photo album or an online photo finishing service. Availability of services varies by country/region. With HP Instant Share E-mail, family and friends always get photos they can view -no more large downloads or images that are too big to open. An e-mail message with thumbnail images of your photos is sent with a link to a secure Web page where family and friends can easily view, share, print, and save the photos.

Overview

To replace the print cartridges 1. Make sure the HP All-in-One is on. Caution If the HP All-in-One is off when you lift the print-carriage access door to access the print cartridges, the HP All-in-One will not release the cartridges for changing. You might damage the HP All-in-One if the print cartridges are not docked safely on the right side when you try to remove them. 2. 3. Make sure the paper tray is down and there is letter or A4 unused plain white paper loaded in the paper tray. Open the print-carriage access door by lowering the door. The print carriage moves to the far right side of the HP All-in-One.
Wait until the print carriage is idle and silent, and then, using your thumb, lightly press down on a print cartridge to release it. If you are replacing the tri-color print cartridge, remove the print cartridge from the slot on the left. If you are replacing the black or photo print cartridge, remove the print cartridge from the slot on the right.
Print cartridge slot for the tri-color print cartridge Print cartridge slot for the black and photo print cartridges
Pull the print cartridge toward you out of its slot.
If you are removing the black print cartridge in order to install the photo print cartridge, store the black print cartridge in the print cartridge protector. For more information, see Use the print cartridge protector. If you are removing the print cartridge because it is low or out of ink, recycle the print cartridge. The HP Inkjet Supplies Recycling Program is available in many countries/regions, and lets you recycle used print cartridges free of charge. For more information, go to the following website: www.hp.com/hpinfo/globalcitizenship/environment/recycle/inkjet.html Remove the new print cartridge from its packaging and, being careful to touch only the black plastic, gently remove the plastic tape by using the pink pull tab.
Maintain your HP All-in-One 3
Caution Do not touch the copper-colored contacts or ink nozzles. Touching these parts can result in clogs, ink failure, and bad electrical connections.
Slide the new print cartridge forward at a slight upward angle into the empty slot. Using your index finger, push the print cartridge forward until it clicks into place. If the print cartridge you are installing has a white triangle on its label, slide the print cartridge into the slot on the left. The label for the slot is green with a solid white triangle. If the print cartridge you are installing has a white square or a white pentagon on its label, slide the print cartridge into the slot on the right. The label for the slot is black with a solid white square and a solid white pentagon.

The Readme file provides more information, including:

Setup troubleshooting

This section includes installation and configuration troubleshooting tips for some of the most common issues associated with software installation and hardware setup.
Hardware setup troubleshooting
Use this section to solve any problems you might encounter while setting up the HP All-in-One hardware.
My HP All-in-One does not turn on Solution Try the following: Make sure the power cable is firmly connected to both the HP All-in-One and the power adaptor, as shown below.
Plug the power cable into a grounded power outlet, surge protector, or power strip. If you are using a power strip, make sure the power strip is on. Test the power outlet to make sure it is working. Plug in an appliance that you know works, and see if the appliance has power. If not, then there might be a problem with the power outlet. If you plugged the HP All-in-One into a switched outlet, make sure the switch is on. When you press the On button, wait a few seconds for the HP All-in-One to turn on.
My USB cable is not connected Solution You must first install the software that came with your HP All-in-One before connecting the USB cable. During installation, do not plug in the USB cable until prompted by the onscreen instructions. Connecting the USB cable before prompted can cause errors. Connecting your computer to your HP All-in-One with a USB cable is straightforward. Simply plug one end of the USB cable into the back of your computer and the other into the back of the HP All-in-One. You can connect to any USB port on the back of your computer. Note 1 AppleTalk is not supported.
Note 2 Do not plug the USB cable into the USB port on your keyboard.
I received a message on the computer to attach the control panel overlay Solution This might mean the control panel overlay is not attached, or it is attached incorrectly. Peel and remove the back of the control panel overlay. Lift the lid and insert the overlay tabs into the device. Press down on the overlay to ensure it is firmly attached.
I received a message on the computer that the print cartridge alignment failed Cause The incorrect type of paper is loaded in the paper tray. Solution If you have colored paper loaded in the paper tray when you align the print cartridges, the alignment fails. Load unused plain white letter or A4 paper into the paper tray, and then try the alignment again. If the alignment fails again, you might have a defective sensor or print cartridge. Contact HP Support. Go to www.hp.com/support. If prompted, choose your
country/region, and then click Contact HP for information on calling for technical support. Cause Protective tape is covering the print cartridges.
Solution Check each print cartridge. If the plastic tape is still covering the ink nozzles, gently remove the plastic tape by using the pink pull tab. Do not touch the ink nozzles or the copper-colored contacts.

When I insert the CD-ROM into my computers CD-ROM drive, nothing happens Solution Do the following: 1. From the Windows Start menu, click Run. 2. In the Run dialog box, enter d:\setup.exe (if your CD-ROM drive is not assigned to drive letter D, enter the appropriate drive letter), and then click OK.
The minimum system checks screen appears Solution Your system does not meet the minimum requirements to install the software. Click Details to see what the specific problem is, and then correct the problem before attempting to install the software.
A red X appears on the USB connect prompt
Solution Normally, a green check appears indicating that the plug and play is successful. A red X indicates that the plug and play failed. Do the following: 1. 2. Verify that the control panel overlay is firmly attached, and then unplug the HP All-in-One and then plug it in again. Verify that the USB and power cables are plugged in.
Verify that the USB cable is set up properly as follows: Unplug the USB cable and plug it in again. Do not attach the USB cable to a keyboard or non-powered hub. Verify that the USB cable is 3 meters (9.8 feet) or less in length. If you have several USB devices attached to your computer, you might want to unplug the other devices during the installation. Continue with the installation and restart the computer when prompted. Then open HP Director (or HP Solution Center) and check for the essential icons (Scan Picture,Scan Document, and HP Image Zone). If the essential icons do not appear, remove the software and then reinstall it. For more information, see Uninstall and reinstall the software.
I received a message that an unknown error has occurred Solution Try to continue with the installation. If that doesnt work, stop and then restart the installation, and follow the directions on the screen. If an error occurs, you might need to uninstall and then reinstall the software. For information , see Uninstall and reinstall the software.
Some of the icons are missing in the HP Director (or HP Solution Center) If you installed the full version of the software and the essential icons (Scan Picture, Scan Document, and HP Image Zone) do not appear, your installation might not be complete. If you did not install the full version of the software, the essential icons are Scan Picture and Scan Document (the HP Image Zone Express icon will appear on your desktop, not in the HP Director). Solution If your installation is incomplete, you might need to uninstall and then reinstall the software. Do not simply delete the HP All-in-One program files from your hard drive. Make sure to remove them properly using the uninstall utility provided in the HP All-in-One program group. For more information, see Uninstall and reinstall the software.
The registration screen does not appear Solution In Windows, you can access the registration screen from the Windows taskbar by clicking Start, pointing to Programs or All Programs (XP), Hewlett-Packard, HP PSC 1500 All-in-One series, and then clicking Sign up now.

The Digital Imaging Monitor does not appear in the system tray Solution If the Digital Imaging Monitor does not appear in the system tray, start the HP Director (or HP Solution Center) to check whether or not essential icons are there. For more information, see the Use the HP Director section of the HP Image Zone Help that came with your software. The system tray normally appears at the bottom of the desktop.
Uninstall and reinstall the software If your installation is incomplete, or if you connected the USB cable to the computer before prompted by the software installation screen, you might need to uninstall and then reinstall the software. Do not simply delete the HP All-in-One program files from your hard drive. Make sure to remove them properly using the uninstall utility provided in the HP All-in-One program group. A reinstall can take from 20 to 40 minutes for both Windows and Mac computers. There are three methods to uninstall the software on a Windows computer. To uninstall from a Windows computer, method 1 1. Disconnect your HP All-in-One from your computer. Do not connect the HP All-inOne to your computer until after you have reinstalled the software. 2. On the Windows taskbar, click Start, Programs or All Programs (XP), HewlettPackard, HP PSC 1500 All-in-One series, uninstall software. 3. Follow the onscreen instructions. 4. If you are asked whether you would like to remove shared files, click No. Other programs that use these files might not work properly if the files are deleted. 5. Restart your computer. Note It is important that you disconnect your HP All-in-One before restarting your computer. Do not connect the HP All-in-One to your computer until after you have reinstalled the software.
To reinstall the software, insert the HP All-in-One CD-ROM into your computers CD-ROM drive, and follow the onscreen instructions and the instructions provided in the Setup Guide that came with your HP All-in-One. After the software is installed, connect the HP All-in-One to your computer. Press the On button to turn the HP All-in-One on. After connecting and turning on your HP All-in-One, you might have to wait several minutes for all of the Plug and Play events to complete. Follow the onscreen instructions.
When the software installation is complete, the Status Monitor icon appears in the Windows system tray. To verify that the software is properly installed, double-click the HP Director (or HP Solution Center) icon on the desktop. If the HP Director (or HP Solution Center) shows the essential icons (Scan Picture, Scan Document, and HP Image Zone), the software has been properly installed. To uninstall from a Windows computer, method 2 Note Use this method if Uninstall Software is not available in the Windows Start menu. 1. 2. 3. 4. 5. On the Windows taskbar, click Start, Settings, Control Panel. Double-click Add/Remove Programs. Select HP PSC & OfficeJet 4.5, and then click Change/Remove. Follow the onscreen instructions. Disconnect your HP All-in-One from your computer. Restart your computer. Note It is important that you disconnect your HP All-in-One before restarting your computer. Do not connect the HP All-in-One to your computer until after you have reinstalled the software. 6. 7. Launch setup. Follow the onscreen instructions and the instructions provided in the Setup Guide that came with your HP All-in-One.

Press the On button to turn off the HP All-in-One. Unplug the power cord, and then disconnect it from the HP All-in-One. Caution Do not return the power cord and power supply with the HP All-in-One. The replacement HP All-in-One will not be shipped with these items. Store the power cord and power supply in a safe place until the replacement HP All-in-One arrives.
If available, pack the HP All-in-One for shipment by using the original packing materials or the packaging materials that came with your exchange device.
If you do not have the original packaging materials, please use other adequate packaging materials. Shipping damage caused by improper packaging and/or improper transportation is not covered under the warranty. 9. Place the return shipping label on the outside of the box. 10. Include the following items in the box: A complete description of symptoms for service personnel (samples of print quality problems are helpful). A copy of the sales slip or other proof of purchase to establish the warranty coverage period. Your name, address, and a phone number where you can be reached during the day.

Technical information

The technical specifications and international regulatory information for your HP All-in-One are provided in this section. This chapter provides information on system requirements for Windows and Mac; paper, print, copy, memory card, specifications for scan, physical, power, and environmental concerns; regulatory notices; and the declaration of conformity.

System requirements

Software system requirements are located in the Readme file. You can access the Readme file by double-clicking the icon located in the top-level folder of the HP All-in-One software CD-ROM. If Windows software is already installed, you can access the Readme file from the Start button on the taskbar; select Programs, Hewlett-Packard, HP PSC 1500 Series, View the Readme File.

Paper specifications

This section provides information on paper-tray capacities, paper sizes, and print margin specifications.

Paper-tray capacities

Type Plain paper Legal paper Cards Envelopes Transparency film Labels 4 by 6 inch (10 by 15 cm) Photo Paper 8.5 by 11 inch (216 by 279 mm) Photo Paper Paper weight 16 to 24 lb. (60 to 90 gsm) 20 to 24 lb. (75 to 90 gsm) 110 lb. index max (200 gsm) 20 to 24 lb. (75 to 90 gsm) N/A N/A 145 lb. (236 gsm) N/A Input tray* 100 (20 lb. paper) 100 (20 lb. paper 30 Output tray** 50 (20 lb. paper) 50 (20 lb. paper) 15 or fewer 10 15

Power specifications

Power consumption: 40 W maximum Input Voltage: 100240VAC @ 5060 Hz Output voltage: 16 V @ 625 mA, 32V @ 940 mA DC
Environmental specifications
Recommended operating temperature range: 15 to 32 C (59 to 90 F) Allowable operating temperature range: 5 to 40 C (41 to 104 F) Humidity: 15% to 85% RH non-condensing Non-operating (Storage) temperature range: 40 to 60 C (40 to 140 F) In the presence of high electromagnetic fields it is possible the output from the HP All-inOne may be slightly distorted HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize injected noise due to potential high electromagnetic fields
Additional specifications
Memory: 8 MB ROM, 32 MB DRAM If you have Internet access, you can get acoustic information from the HP website. Go to: www.hp.com/support.
Environmental product stewardship program
This section provides information on protecting the environment; ozone production; energy consumption; paper use; plastics; material safety data sheets; and recycling programs.
Protecting the environment
Hewlett-Packard is committed to providing quality products in an environmentally sound manner. This product has been designed with several attributes to minimize impacts on our environment. For more information, visit HPs Commitment to the Environment website at: www.hp.com/hpinfo/globalcitizenship/environment/index.html

Ozone production

This product generates no appreciable ozone gas (O3).

Energy consumption

Energy usage drops significantly while in ENERGY STAR mode, which saves natural resources, and saves money without affecting the high performance of this product. This product qualifies for ENERGY STAR, which is a voluntary program established to encourage the development of energy-efficient office products.
ENERGY STAR is a U.S. registered service mark of the U.S. EPA. As an ENERGY STAR partner, HP has determined that this product meets ENERGY STAR guidelines for energy efficiency.

Chapter 15

Limitation of warranty
TO THE EXTENT ALLOWED BY LOCAL LAW, NEITHER HP NOR ITS THIRD PARTY SUPPLIERS MAKES ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, AND FITNESS FOR A PARTICULAR PURPOSE.

Limitation of liability

To the extent allowed by local law, the remedies provided in this Warranty Statement are the customers sole and exclusive remedies. TO THE EXTENT ALLOWED BY LOCAL LAW, EXCEPT FOR THE OBLIGATIONS SPECIFICALLY SET FORTH IN THIS WARRANTY STATEMENT, IN NO EVENT SHALL HP OR ITS THIRD PARTY SUPPLIERS BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON CONTRACT, TORT, OR ANY OTHER LEGAL THEORY AND WHETHER ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Local law

This Warranty Statement gives the customer specific legal rights. The customer may also have other rights which vary from state to state in the United States, from province to province in Canada, and from country to country elsewhere in the world. To the extent that this Warranty Statement is inconsistent with local law, this Warranty Statement shall be deemed modified to be consistent with such local law. Under such local law, certain disclaimers and limitations of this Warranty Statement may not apply to the customer. For example, some states in the United States, as well as some governments outside the United States (including provinces in Canada), may: Hewlett-Packard LIMITED WARRANTY STATEMENT Preclude the disclaimers and limitations in this Warranty Statement from limiting the statutory rights of a consumer (e.g., the United Kingdom); Otherwise restrict the ability of a manufacturer to enforce such disclaimers or limitations; or Grant the customer additional warranty rights, specify the duration of implied warranties which the manufacturer cannot disclaim, or allow limitations on the duration of implied warranties. THE TERMS IN THIS WARRANTY STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT, OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF THE HP PRODUCTS TO SUCH CUSTOMERS.
Limited warranty information for EU countries/regions
Listed below are the names and addresses of the HP entities which grant HPs Limited Warranty (manufacturers warranty) in your country. You may also have statutory legal rights against the seller on the basis of the purchase agreement in addition to the manufacturers warranty, which are not restricted by this manufacturers warranty. Belgique/Luxembourg Hewlett-Packard Belgium BVBA/ SPRL Luchschipstraat 1 Rue de l'aeronef B-1140 Bruxelles Ireland Hewlett-Packard Ireland Ltd. 30 Herbert Street IRL-Dublin 2 Danmark Hewlett-Packard A/S Kongevejen 25 DK-3460 Birkeroed

hpxipk50474bs PSC 1510 17/6/2005 11:12 AM Page 1

C M Y CM MY CY CMY K

HPXIPK 50474BS_Millhouse_HP PSC 1510 AiO_Size: 210 x148H_Open/420 x148mm_Close
HP PSC 1510 All-in-One Printer, Scanner, Copier
Print Up to 4800-optimised dpi1 colour HP PhotoREt 3 Colour Layering Technology (PhotoREt 4 Colour Layering Technology with optional photo cartridge) Up to1200-rendered dpi black when printing from a computer Print method: HP Thermal Inkjet printing Language: Lightweight Imaging Device Interface Language (LIDIL) Duty cycle: Up to 1000 pages per month Speed2 Black text Colour graphics Scan Draft Up to 20 ppm Up to 18 ppm Normal Up to 7 ppm Up to 5 ppm Best Up to 2.4 ppm Up to 0.6 ppm

Ordering information

Number Q5880A Supplies C9362W C9361W C8765W C8766W C9369W Description HP PSC 1510 All-in-One Printer, Scanner, Copier HP HP HP HP HP 99 Black Inkjet Print Cartridge Tri-colour Inkjet Print Cartridge Black Inkjet Print Cartridge (higher volume) Tri-colour Inkjet Print Cartridge (higher volume) Photo Inkjet Print Cartridge Q1936A C6065A HP Premium Inkjet Paper A4-size, 200 sheets HP Iron-On Transfers A4-size, 12 sheets HP Textured Greeting Cards, Half-fold A4-size, 20 sheets, 20 envelopes HP 95 Series** Photo Pack 4 x 6 (4R-size), 100 sheets
1200 x 1200 dpi optical resolution (Up to 19,200 dpi3 enhanced) Up to 48-bit colour Flatbed scanner Black copy speed2: Up to 20 cpm Colour copy speed2: Up to 18 cpm Colour copy resolution: Up to 4800 x 1200-optimised dpi4 Reduction/enlargement: 50 to 400% Maximum copies: Up to 50 copies Copier settings: Stand-alone copying: fit to page, 100% (with software: photo-size choices and reduce/enlarge) HP Image Zone Photo and Imaging Software on CD-ROM Up to 100-sheet input tray Up to 50-sheet output tray 1 USB, 1 PictBridge Paper: A4 210mm x 297mm, A5 105mm x 146mm, US Letter 216mm x 279mm, US Legal 216mm x 356mm, US Executive 184mm x 267mm, B5-JIS 182mm x 257mm, borderless panoramic (up to 216mm x 610mm) Envelopes: DL 110mm x 220mm, C6 114mm x 162mm, A2 111mm x 146mm Cards: 76mm x 127mm, C6 102mm x 152mm, 127mm x 203mm, A6 105mm x 148.5mm 43.4 x 58.7 x 16.2 cm (paper tray down); 43.4 x 29.0 x 16.2 cm (paper tray folded up)/5.08 kg Windows 98, 98 SE, Me, 2000 Professional, XP Home, XP Professional; Mac OS X v10.1.5, v10.2.3 and higher, v10.3 and higher For PC: Any Intel Pentium II or Celeron processor (Pentium III or higher recommended); 128 MB RAM (256 MB or higher recommended for all operating systems); 855 MB available hard disk space for full software installation (395 MB for basic software installation); Windows 98, 98 SE, 2000, Me, XP Home, XP Professional (does not support Windows 3.1, 95, NT 4.0 and DOS); SVGA monitor (800 x 600, 16-bit colour); CD-ROM drive; USB port and USB cable for direct connection; Microsoft Internet Explorer 5.01 or higher; Adobe Acrobat Reader 5 or higher recommended; Internet access recommended; full-colour scanning requires an additional 50 MB hard disk space For Mac: G3 processor (G4 or higher recommended); 128 MB RAM (256 MB or higher recommended); 400 MB available hard disk space for software installation; Mac OS X v10.1.5, 10.2.3 or higher, 10.3 or higher (does not support Mac OS 9, Mac OS X v10.2, 10.2.1 and 10.2.2); HP Memories Disc Creator software requires CD-Writer and 700 MB of additional hard disk space; QuickTime 5.0 or higher; any Web browser

Q1951A Q2504A Q6602A*

HP Premium Plus High-gloss Photo Paper A4-size, 20 sheets 4 x 6 (4R-size), 20 sheets 10 x 30 cm (Panoramic-size), 20 sheets HP Glossy Photo Paper A4-size, 20 sheets HP Everyday Semi-gloss Photo Paper A4-size, 100 sheets A4-size, 40 sheets
Compact all-in-one with PictBridge for direct photo printing

C6765A

C6829A
Software included Paper handling Interface and connectivity Media size

Q2511A Y2143A

Q7937A*
Available in selected Asia-Pacific countries only Specifically designed to print x 6 (4R-size) photos

Hewlett-Packard offices

Australia Hong Kong India Indonesia Korea Malaysia New Zealand Philippines Tel Tel Tel Tel Fax Tel Tel Tel Tel : : : : : : : : : 47 (852) 444 999/ (0800) (0800) (080) 4848 (0800) 4488 PRC Singapore Taiwan Thailand Vietnam Bangladesh, Brunei, Cambodia, Pakistan and Sri Lanka Tel Tel Tel Tel Tel Fax : : : : : : (800) 820 6616/ (021) 8100 (0800) (66-2) (84-8) (65) 6275 6707
Dimensions (w x d x h)/Weight Operating systems System requirements

Dealers Stamp

HP customer care
One-year limited hardware warranty; optional HP Care Pack for 3 years from purchase date; 24-hour electronic support available at www.hp.com/support

Power features5

Input voltage: 90 to 264 VAC (+/- 10%) Input frequency: 47/63 Hz, (+/- 3 Hz) Current: 1 amp maximum Consumption: 70 watts maximum Recommended: 15 to 32C, 15 to 85% RH Maximum: 5 to 40C, 15 to 85% RH Storage temperature: -40 to 60C Acoustic power emission: printing (black): 5.9 B(A), printing (colour): 5.6 B(A), copying (black): 5.7 B(A), copying (colour): 5.4 B(A), idle: 3.3 B(A) Acoustic pressure emission: printing (black): 46 dB(A), printing (colour): 42 dB(A), copying (black): 45 dB(A), copying (colour): 41 dB(A), idle: 21 dB(A)

For specific warranty details, please check with your local country reseller.

Operating environment

For more information, visit us at http://www.hp.com/apac/homeandoffice
Energy Star is a U.S. registered service mark of the United States. Environmental Protection Agency.

HP PSC 1510 All-in-One

Printer, Scanner, Copier

Noise level

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Copyright 2005 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Printed in Singapore: 06/2005 P/N: 200030170
Up to 4800 x 1200-optimised dpi colour when printing from a computer and 1200-input dpi. Print and copy speeds may vary depending on the type of output. The maximum dpi at which you can scan is limited by available computer memory, disk space and other system factors. On HP premium photo papers and 1200 scan dpi. Power requirements are based on the country or region where the product is sold. Do not convert operating voltages or use with other voltages. Doing so might cause damage that would not be covered under HPs product warranty.
hpxipk50474bs PSC 1510 17/6/2005 11:12 AM Page 2

Get ready for

Original HP Supplies
The science behind brilliant printing
New HP Vivera Inks for great printouts
beautiful photos, scans and copies
Direct photo printing, convenient copying and high quality scanning its all neatly packed in the easy-to-use HP PSC 1510 All-in-One. With an intuitive control panel and one-touch buttons, you can easily print, copy and scan photos and documents in true-to-life colours and laser-quality black. Whats more, with its compact design and a fold-up paper tray, youll have no trouble fitting it in even the tightest corners.
Recommended usage for best results Ideal print volume:

HP INKS

True-to-life
Scans at 1200 x 1200 dpi optical
resolution and 48-bit colour
The new HP 92 Black and HP 93 Tri-colour inkjet print cartridges are specially designed for all your basic printing needs and are included with every purchase of the HP PSC 1510 All-in-One. Use the HP 94 Black and HP 95 Tri-colour inkjet print cartridges when you need to print more.
For more information on cartridge page and photo yields, see www.hp.com/go/pageyield
photos with HP Vivera Inks
Print and copy true-to-life photos that resist fading for generations4 in optional 6-ink5 colour with HP Vivera Inks. Plus, print your favourite photos, with or without borders, from 4 x 6-inch up to a panoramic 8.5 x 24-inch6. You can also preserve treasured memories with high-quality scanning. Simply scan your photos or documents using the glass-top scanner bed to convert them into digital files for easy storing and reprinting.

Direct photo printing

connect your camera directly
HP Photo Papers and Photo Packs
Moderate to high print volume, about 50 150* pages per month

Copies photos and

Ideal for: Basic photo printing School and creative home projects Document printing and copying Colour copying Photo and document scanning Other HP printers to consider: HP PSC 1610 Photosmart All-in-One Versatile, easy-to-use all-in-one with PictBridge and memory card slots
* Projected usage based on actual usage of similar products.
documents without a PC. Plus, easily enlarge and resize photos up to 8.5 x 11-inch
Now you can conveniently print photos without turning on your PC. By connecting a PictBridge-enabled camera to the HP PSC 1510 All-in-Ones front USB port, all your snapshots can be printed and shared instantly. Let HPs range of innovative software tools expand your creativity! HP Image Zone lets you organise, edit and transform your favourite photos into creative projects such as photo cards, CD labels and more. For enhancing your pictures, theres HP Real Life technologies to automatically remove red-eye and bring out details in poorly lit or shadowy photos. In addition, with HP Instant Share3, you can easily send and receive photos without the burden of large email attachments.

Compact all-in-one

Enjoy fast and reliable performance of this compact photo all-in-one. Its stylish design features a fold-up paper tray that maximises space, and the intuitive control panel with eight convenient one-touch buttons make it easy to print, scan and copy your photos and documents in a variety of sizes.
Enjoy printing your own photos at home with HP's range of photo papers. Pick up an HP Photo Pack** the affordable and convenient way to get photo lab quality prints.
**Available in selected Asia-Pacific countries only.

PictBridge

enables direct photo printing from digital cameras1
Prints at speeds of up to 20 ppm black
and 18 ppm colour, at up to 4800-optimised dpi2
Applies to PictBridge-enabled digital cameras only. Up to 4800 x 1200-optimised dpi colour when printing from a computer and 1200-input dpi. Internet connection required. Internet service purchased separately. Based on Wilhelm-Research.com light fade testing under glass on HP Premium Plus Photo Papers. For more information on additional permanence testing factors, visit www.hp.com/apac/longlasting 6-ink printing available with purchase of HP 99 Photo Inkjet Print Cartridge; not included; sold separately. Borderless printing up to 8.5 x 24-inch using brochure and photo paper, sold in selected countries only.