hp All-In-One Products

environmental profile

published 3/05

Hewlett-Packard Company All-In-One Personal Printing 16399 West Bernardo Drive San Diego, Ca 92127-1899 product description
Models: HP PSC 1500 Series (Q5888A,Q5889A) PSC 1510(Q5880A,B, Q5886C), PSC 1513(Q5880C), PSC 1508(Q5880D), PSC 1510xi(Q5881A), PSC 1510V(Q5882A),PSC 1507(Q5883A,B), PSC 1503(Q5883C), PSC 1504(Q5884B), PSC 1514(Q5885B) Regulatory Model Number: SDGOB-0502
Weight: 5.08 kg (11.19 pounds)
Height: 16.2 cm (6.38 inches) Width: 43.4 cm (17.09 inches) Depth: 29.0 cm (11.42 inches) (Measurements provided are for a non-packaged product, trays folded)
environmental certifications other features
This product conforms to the following voluntary environmental program criteria: ENERGY STAR
HP has designed this product with the following additional features to help the user conserve resources: Print, Copy and Scan in one product Draft Quality Printing Optionsaves toner/ink and paper This product is suited for the use of recycled paper according to DIN 19309 Photo/Imaging
warranty, service & options
Standard Warranty: Extended Warranty: Spare Parts Available: Service Available:
1year Extended warranty service available defined by region. Variable, defined by region. 3 years after end of production. At the end of that time The product is supported on a best effort basis.

Operational data

Operational Mode: Up to 20 pages-per-minute in fast draft mode. Actual speed will vary with operating mode and print content. Energy Consumption: Operation: Sleep: for this product) Idle/Ready/Standby: Off: Operation: Idle/Ready/Sleep: 14.6 W (Normal Mode) 9.9 W (Per U.S. EPA ENERGY STAR Test Guidelines, if applicable 9.9 W 7.4 W 6.7 bels in fast mode. All other modes 5.9 bels or lower. 3.3 bels (inaudible)
Acoustical Noise: (declared sound power (LwAd) per ISO 7779/ISO 9296)
product safety information product restricted materials
For chemical information about related HP printer supplies, please refer to Material Safety Data Sheets for these products at: http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/index.html The information in this section refers to materials restricted by regulation or law and applies to parts, components and products sold by HP. This product does not contain: Asbestos Cadmium as a stabilizer, coloring agent or surface coating treatment. Lead carbonates or sulfates are not contained in any paint applied. Mercury Chlorofluorocarbons (CFCs), halons, HCFCs, HBFCs, 1,1,1 trichloroethane, carbon tetrachloride or methyl bromide. Chlorinated or brominated dioxins or furans are not present at a concentration that is currently prohibited by law. Polychlorinated biphenyls (PCB) or polychlorinated terphenyls (PCT).
For additional product material information about this product, see additional product materials below. For product material information for associated batteries and packaging, see batteries and packaging, below.
additional product materials batteries Packaging
Plastic parts do not contain polybrominated biphenyls (PBBs) or polybrominated biphenyl ethers (PBBEs) (also known as polybrominated biphenyl oxides (PBBOs)). Halogenated flame-retardants are not used in the housing plastics. This product contains no battery. Packaging materials do not contain lead, mercury, cadmium or hexavalent chromium as an intentionally added element. The sum concentration of incidental lead, mercury, cadmium and hexavalent chromium in the packaging for this product is less than 100mg/kg. No chlorofluorocarbons (CFCs), halons, HCFCs, HBFCs, 1,1,1 trichloroethane, carbon tetrachloride or methyl bromide are used in plastic foam packaging materials. Plastic packaging materials are marked according to ISO 11469 and DIN 6120 standards.

External: Corrugated Paper1 Internal: Polystyrene-Foam Polyethylene-Bag(s)
Weight: 570.8 g (1.23 pounds) Weight: 21.3g (0.05 pounds) Weight: 22.7 g (0.05 pounds)
HP designs packaging to be recyclable where practical. The recyclability of the packaging depends
on the availability of municipal recycling programs for the packaging used. To ensure compliance with local packaging take-back requirements, in the following European countries, HP is a member of a packaging recovery scheme. Some countries are operating a Green Dot system as indicated.
Countries with Green Dot systems Austria (ARA) Belgium (Fostplus: consumer products) (Val-I-Pac: professional products) France (Eco-Emballages) Germany (DSD) Ireland (Repak) Portugal (Punto Verde SA) Spain (Ecoembes) Sweden (Repa Registret)
Countries with no Green Dot system Finland (PYR Ltd) Italy (Conai) Norway (Materialretur) Switzerland (SWICO) UK (Valpak) Some larger HP offices also accept HP product packaging* from customers in countries or areas without local packaging recovery schemes. Contact your local HP sales office for more information.
*This does not include packaging that is contaminated or contains dangerous substances, which should be disposed of in accordance with local regulations.
End-of-life management/ recyclability
Hewlett-Packard offers end-of-life HP product return programs in certain geographic areas. To determine if a program is available for this HP product in your area, please refer to our recycling Web site at: http://www.hp.com/hpinfo/globalcitizenship/environment/recycle/index.html or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner This HP product is designed to enhance end-of-life disposal options by: Marking plastic parts weighing more than 25g according to ISO 11469 international standards Eliminating glues and adhesives from product construction where technically feasible Using common fasteners Including snap-in features
This HP product contains the following materials that may require special handling at end-of-life: Mercury in the fluorescent lamp in the scanner Lead in solder
For recycling information, you can contact: www.hp.com/hpinfo/globalcitizenship/environment/recycle/index.html or contact your local authorities or the Electronics Industries Alliance: www.eiae.org (If any of the above materials requiring special handling is included in the data sheet then this sentence must also be included.)

company information

Environmental Policy Hewlett-Packard Company established an environmental policy in 1992 with the goals of providing products and services that are environmentally sound throughout their lifecycles and

providing products and services that are environmentally sound throughout their lifecycles and conducting its operations worldwide in an environmentally responsible manner. HP has strengthened that commitment with the intent to be the recognized leader in inventing environmentally sustainable solutions for the common good. ISO 14001 In June 2000 HP achieved ISO 14001 certificationthe international standard for environmental management systemsof its worldwide manufacturing operations. Issued by the independent registration firm, Bureau Veritas Quality International (BVQI), this global certification is your assurance that HPs policies, procedures and organization for managing the environmental aspects of our operations meet the voluntary requirements of ISO 14001. Ozone-Depleting Substances Hewlett-Packard has eliminated all manufacturing process uses of chlorofluorocarbons (CFCs), HBFCs, halons, 1,1,1 trichloroethane (TCA), carbon tetrachloride and methyl bromide, and we require suppliers to avoid using these chemicals in their manufacturing processes.

for more information

The following information is available online at: More about HPs commitment to the environment Material Safety Data Sheets (MSDS) for HP printer supplies Environmental profiles for many related HP products End-of-life return and recycling programs for selected HP products, depending upon geographic location
The information presented in this document is based largely on the recommendations made by the ECMA Standardizing Information and Communication Systems Technical Committee 38, Technical Report 70, and is believed accurate and reliable for operating the HP PCS 1500 series products. Data are the most current available to Hewlett-Packard at the time of preparation and is issued as a matter of information only. No warranty as to accuracy or completeness is expressed or implied. The information in this document is subject to change without notice. ENERGY STAR is a U.S. registered service mark of the U.S. Environmental Protection Agency. As an ENERGY STAR Partner, Hewlett-Packard Company has determined that this product meets the ENERGY STAR guidelines for energy efficiency. GREENGUARD
is a U.S. registered trademark of Air Quality Sciences, Inc.
Copyright Hewlett-Packard Company, 2001. All Rights Reserved. Reproduction, adaptation, or translation without prior written permission is prohibited except as allowed under copyright laws.

Product End-of-Life Disassembly Instructions
Product Category: Inkjet Printers Marketing Name / Model [List multiple models if applicable.] PhotoSmart-PSC 1500 PRODUCT (Q5888A) MODELS PSC 1510(Q5880A/B, Q5886C), 1513(Q5880C), 1508(Q5880D), 1510xi(Q5881A), 1510v(Q5882A), 1507(Q5883A/B), 1503(Q5883C, 1504(Q5884B), 1514(Q5885B)
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 1.0 Items Requiring Selective Treatment 1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable. Quantity of items Item Description Notes included in product Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) Batteries Mercury-containing components Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm Cathode Ray Tubes (CRT) Capacitors / condensers (Containing PCB/PCT) Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height External electrical cables and cords Gas Discharge Lamps Plastics containing Brominated Flame Retardants Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner Components and waste containing asbestos Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances EL-MF877-00 Template Revision A Include the cartridges, print heads, tubes, vent chambers, and service stations. With a surface greater than 10 sq cm All types including standard alkaline and lithium coin or button style batteries For example, mercury in lamps, display backlights, scanner lamps, switches, batteries Includes background illuminated displays with gas discharge lamps 3 ------------------------------------3 ------------Page 1
2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable) Common Hand Tools. Torx screw driver Flat blade screw driver Wire Cutting Pliers Needle Nose Pliers 3.0 Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: 1. 2. 3. 4. 5. 6. 7. 8. 9. Remove inkjet cartridges, if applicable. Remove outer housing skins and sort according to markings. Disassemble chassis using appropriate tools and set aside items requiring selective treatment. #10
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations). See attached illustration for location & description of the following items requiring selective treatment: 1. 2. 3. 4. 5. 6. 7. 8. 9.
EL-MF877-00 Template Revision A

Page 2

Page 3