Q3122-90101

*Q312290101*

hp scanjet 4670 digital flatbed scanner setup

check the box contents

1. HP Scanjet digital flatbed scanner 2. Vertical holder, with folding legs for storage Used for positioning and holding items for scanning 3. Transparent materials adapter (TMA) For instructions on how to scan slides and negatives, see the Users Manual 4. One or more CDs (depending on your location) 5. Combination USB and power cable 6. Power cable and AC adapter (one or two pieces, depending on your scanner) 7. Users Manual 8. Setup Poster
scan photos and documents
1. Pull the top edge of the scanner, rotating the scanner forward in the holder. The scanner can rest against the front edge of the holder. 2. Position the item face up in the lower left corner of the holder, with the top of the item facing left. Use the media placement tabs on the holder to position the item. 3. Return the scanner to its original position on the holder. You can see the item face up through the scanner glass. 4. Press the Scan button. 5. Follow the instructions on the screen. For instructions on how to scan a thick document, see the Users Manual.

install the software

1. If you are installing the software onto a Windows 2000 or Windows XP system, log on as an administrator. See your operating system help for how to log on as an administrator. 2. Close all programs on the computer. 3. Locate the HP Photo & Imaging software CD that is appropriate for your language. 4. Insert the CD into the computers CD drive. Windows Follow the instructions on the screen. If the installation application does not start automatically: On the Start menu, click Run, and type: x:setup.exe (where x is the letter of the CD drive). If you will scan oversized items (larger than the scanner glass), select Panorama Maker and ReadIris Pro when asked to verify the software to install. Macintosh Double-click the installer icon on the CD and follow the instructions. If you will scan oversized items (larger than the scanner glass) double-click the Bonus folder icon, and then double-click the Panorama Maker installer icon.

scanner buttons

Power Save Scan Copy Turns off the scanner lamp and puts the scanner in low-power mode. Scans a photo or document and places it in the specified destination. Scans a photo or document and sends it to the default printer to make copies.
HP Instant Share Scans a photo and allows you to share it in e-mail, create an album on the HP website, or order professional-quality prints. (Not all services available in all regions or on all operating systems.)
connect the scanner to the computer and connect the power
4 1. Connect the combination USB and power cable to the scanner cable. 2. Connect the power cable to the connector on the shorter cable of the combination USB and power cable. 3. Connect the USB connector of the combination USB and power cable to a USB port on the computer. 4. Do one of the following: If you have a one-piece power cable, connect the other end to a surge protector or a grounded wall outlet. If you have a two-piece power cable (comes with an adapter), connect one end of the power cable to the power adapter, and then connect the other end of the power adapter to a surge protector or a grounded wall outlet. 2

find the scanning side

The scanner has glass on both sides. One side is called the scanning side; the other side is called the viewing side. 1. Viewing side: The viewing side has a light frame around the glass, which shows the HP logo and product name. You can see the item to scan face up through the glass as you look at the viewing side. The scanner lamp shines away from this side when scanning. 2. Scanning side: The scanning side has a dark frame around the glass, which always faces the item being scanned. The scanner lamp shines through this side when scanning.
set up the vertical holder, set the scanner on the holder

1. Open the support legs by rotating them into place. a. Open the rear support first; make sure it clicks into the fully open position. b. Rotate the front support from behind the holder to the front of the holder until it clicks into place. 2. Set the holder on a flat surface. 3. If there is a sticker on the front of the holder, peel it off. 4. Place the scanner in the holder so the light-colored frame with the HP logo faces you. The buttons will be on the right side of the scanner. The cord exits the scanner at the lower left. 5. To align the scanner on the holder, slide the scanner from side to side in the holder until it is secured in the holder. Note: The holder can be used for holding the scanner, positioning items to scan, and providing a flat surface on which to scan. The holder is not necessary for scanning.

product support

www.scanjet.hp.com www.hp.com/support www.shopping.hp.com (U.S. only) www.hp.com (worldwide)
For information on installation problems, customer support, and how to use the scanner, see the Users Manual. The printed User's Manual is shipped in the box or is available electronically from the Help menu in the HP Scanning software. Visit these websites: www.scanjet.hp.com for product updates, promotions and scanning tips www.hp.com/support for customer support www.shopping.hp.com (U.S. only) or www.hp.com (worldwide) for ordering HP accessories, supplies, and products

hp scanjet 4670

environmental profile

published 12/03

Hewlett-Packard Company Consumer Imaging and Printing 3404 East Harmony Road Fort Collins, CO, 80528, USA product description
Model: HP ScanJet 4670(Q3122A), 4670v(Q3123A), 4670xi(Q3124A)
Weight: 1.37 kg Height: 1.9 cm Width: 41.3 cm Depth: 29.8 cm (Measurements provided are for a non-packaged product) This product conforms to the following voluntary environmental program criteria: ENERGY STAR
environmental certifications other features warranty, service & options
HP has designed this product with the following additional features to help the user conserve resources: Not applicable 1 year None 3 years after end of production 3 years after end of production Standard Warranty: Extended Warranty: Spare Parts Available: Service Available:

operational data

Operational Mode: 4.5 second preview scan Energy Consumption: Operation: Sleep: for this product) Idle/Ready/Standby: Off: Acoustical Noise: Operation: Idle/Ready/Sleep: 14.5 W 9.5 W (Per U.S. EPA ENERGY STAR Test Guidelines, if applicable 11.5 W 9.5 W 3.9 bels 2.2 bels (inaudible)
(declared sound power (LwAd) per ISO 7779/ISO 9296)
product safety information product restricted materials
For chemical information about related HP printer supplies, please refer to Material Safety Data Sheets for these products at: http://www.hp.com/go/msds The information in this section refers to materials restricted by regulation or law and applies to parts, components and products sold by HP. This product does not contain: Asbestos Cadmium as a stabilizer, coloring agent or surface coating treatment. Lead carbonates or sulfates are not contained in any paint applied. Mercury (except lamps containing less than 10 mg) Chlorofluorocarbons (CFCs), halons, HCFCs, HBFCs, 1,1,1 trichloroethane, carbon tetrachloride or methyl bromide. Chlorinated or brominated dioxins or furans are not present at a concentration that is currently prohibited by law. Polychlorinated biphenyls (PCB) or polychlorinated terphenyls (PCT).
For additional product material information about this product, see additional product materials below. For product material information for associated batteries and packaging, see batteries and packaging, below.
additional product materials batteries packaging
Plastic parts do not contain polybrominated biphenyls (PBBs) or polybrominated biphenyl ethers (PBBEs) (also known as polybrominated biphenyl oxides (PBBOs)).
This product does not contain batteries.
Packaging materials do not contain lead, mercury, cadmium or hexavalent chromium as an intentionally added element. The sum concentration of incidental lead, mercury, cadmium and hexavalent chromium in the packaging for this product is less than 100mg/kg. No chlorofluorocarbons (CFCs), halons, HCFCs, HBFCs, 1,1,1 trichloroethane, carbon tetrachloride or methyl bromide are used in plastic foam packaging materials. Plastic packaging materials are marked according to ISO 11469 and DIN 6120 standards.
External: Corrugated Paper1 Weight: 0.7 kg Internal: Polystyrene-Foam Polyethylene-Bag(s) Weight: 0.17 kg Weight: 0.06 kg
Recycled content varies by region.
HP designs packaging to be recyclable where practical. The recyclability of the packaging depends on the availability of municipal recycling programs for the packaging used.
To ensure compliance with local packaging take-back requirements, in the following European countries, HP is a member of a packaging recovery scheme. Some countries are operating a Green Dot system as indicated.
Countries with Green Dot systems Austria (ARA) Belgium (Fostplus: consumer products) (Val-I-Pac: professional products) France (Eco-Emballages) Germany (DSD) Ireland (Repak) Portugal (Punto Verde SA) Spain (Ecoembes) Sweden (Repa Registret)
Countries with no Green Dot system Finland (PYR Ltd) Italy (Conai) Norway (Materialretur) Switzerland (SWICO) UK (Valpak) Some larger HP offices also accept HP product packaging* from customers in countries or areas without local packaging recovery schemes. Contact your local HP sales office for more information.
*This does not include packaging that is contaminated or contains dangerous substances, which should be disposed of in accordance with local regulations.
End-of-life management/ recyclability
Hewlett-Packard offers end-of-life HP product return programs in certain geographic areas. To determine if a program is available for this HP product in your area, please refer to our recycling Web site at http://www.hp.com/go/recycle or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner This HP product is designed to enhance end-of-life disposal options by: Marking plastic parts weighing more than 25g according to ISO 11469 international standards Eliminating glues and adhesives from product construction where technically feasible Using common fasteners Including snap-in features

This HP product contains the following materials that may require special handling at endof-life: Mercury in the fluorescent lamp in the scanner/liquid crystal display Lead in solder and/or cathode ray tube
For recycling information, you can contact www.hp.com/go/recycle or contact your local authorities or the Electronics Industries Alliance: www.eiae.org.

company information

Environmental Policy Hewlett-Packard Company established an environmental policy in 1992 with the goals of providing products and services that are environmentally sound throughout their lifecycles and conducting its operations worldwide in an environmentally responsible manner. HP has strengthened that commitment with the intent to be the recognized
leader in inventing environmentally sustainable solutions for the common good. ISO 14001 In June 2000 HP achieved ISO 14001 certificationthe international standard for environmental management systemsof its worldwide manufacturing operations. Issued by the independent registration firm, Bureau Veritas Quality International (BVQI), this global certification is your assurance that HPs policies, procedures and organization for managing the environmental aspects of our operations meet the voluntary requirements of ISO 14001. Ozone-Depleting Substances Hewlett-Packard has eliminated all manufacturing process uses of chlorofluorocarbons (CFCs), HBFCs, halons, 1,1,1 trichloroethane (TCA), carbon tetrachloride and methyl bromide, and we require suppliers to avoid using these chemicals in their manufacturing processes.

for more information

The following information is available online at http://www.hp.com/go/environment More about HPs commitment to the environment Material Safety Data Sheets (MSDS) for HP printer supplies Environmental profiles for many related HP products End-of-life return and recycling programs for selected HP products, depending upon geographic location
The information presented in this document is based largely on the recommendations made by the ECMA Standardizing Information and Communication Systems Technical Committee 38, Technical Report 70, and is believed accurate and reliable for operating hp scanjet 4670, 4670v, 4670xi. Data are the most current available to Hewlett-Packard at the time of preparation and is issued as a matter of information only. No warranty as to accuracy or completeness is expressed or implied. The information in this document is subject to change without notice.

ENERGY STAR is a U.S. registered service mark of the U.S. Environmental Protection Agency. As an ENERGY STAR Partner, Hewlett-Packard Company has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Copyright Hewlett-Packard Company, 2001. All Rights Reserved. Reproduction, adaptation, or translation without prior written permission is prohibited except as allowed under copyright laws.