The charging lights monitor the refresh status:
Descending blinking Discharging battery pack (lights turn off as green lights discharging progresses). Ascending steady green lights Charging battery pack (lights turn on as charging progresses). Charging is complete when all three lights are lit.
Setting the picture quality
Before taking pictures, change the picture quality setting (or resolution) on your digital camera to 3:2. This ensures that the pictures you take are proportional to the printer dock paper, preventing unwanted cropping of your pictures. See your camera users guide for more information.
Tagging pictures for printing
NOTE: The following procedure pertains to Kodak EasyShare digital cameras. For information on tagging pictures on other brands of ImageLink system compatible cameras, see the camera users guide. 1 Press the Share button. 2 Press to locate a picture. 3 Make sure Print is highlighted (to tag all pictures in the current image storage location, highlight Print All ), then press the OK button. 4 Press to select the number of copies (0 - 99). The default is one. Zero removes the tag for a selected picture. The Print icon is displayed in the status area.
To apply a print quantity to other pictures, press the print quantity as is, or press to change it.

to locate them. Keep

5 Press the OK button. 6 Press the Share button to exit. NOTE: To remove print tagging from all pictures: from the Share menu, highlight Cancel Prints press the OK button. To print tagged pictures from your digital camera, see page 15. To print tagged pictures from your computer, see page 26. 12

, then

Printing without a computer
IMPORTANT: Wait until printing is complete before removing paper, the paper tray, or the camera. Failure to do so can cause paper misfeeds or jams.
Printing from your digital camera
1 Take a picture with your camera (see your camera users guide). 2 Place the camera on the printer dock (see page 10). The current or most recent picture appears on the camera screen.
To print the current picture, press the Print button,
NOTE: If you tagged pictures for printing using your digital camera, instead of printing the current picture, all tagged pictures are printed (see page 15).
Press the Left/Right control on the printer dock, pictures to print.

to review and choose

3 Press the Print button, The copy screen appears.
To print more than one copy, press press.

The Kodak EasyShare printer dock series 3 offers PictBridge technology, which lets you print from any PictBridge compatible camera or device. 1 Plug the USB connector from the PictBridge compatible device into the USB device connector located on the side of the printer dock. NOTE: If the PictBridge compatible device is already plugged in but the connection is no longer available, disconnect then reconnect the USB cable to re-establish the connection.
2 Use your PictBridge compatible device to review pictures, choose printing options, and print. See your device users guide for details.
Changing the printed picture size
1 Follow the procedure for printing from your digital camera (see page 13), Kodak card reader (see page 14), or PictBridge compatible device (see page 15). 2 Before printing, while making selections or changing settings, press the Picture Size button repeatedly to scroll through and select a picture size.
Picture Size setting 1 up (full photo) 2 up (card size) 4 up (wallet size) 9 up (mini photo) Number and size of prints per sheet One 4 x 6 in. (102 x 152 mm) picture Up to two 2.1 x 3.3 in. (54 x 85 mm) pictures Up to four 2 x 3 in. (51 x 76 mm) pictures Up to nine 1.3 x 2 in. (34 x 51 mm) pictures
3 Continue changing other settings or begin printing. To change the default picture size:
Select a picture size (see above), then press and hold the Picture Size button for 4 seconds. The selected Picture Size light blinks, then glows steady.
Effect of picture size on number of copies
In most cases, the picture size setting also determines the number of copies that are printed. For example, if you choose to print a picture with 2 up selected, 2 copies are printed on one sheet of paper. When printing tagged pictures (see page 15), the number of copies that are printed is determined by the setting on your camera or device. For example, if three pictures on your camera are each tagged for printing one copy, and the 4 up option on the printer dock is selected, three 2 x 3 in. (51 x 76 mm) pictures are printed on one sheet of paper. For best results, choose a picture size or number of copies (on your camera or device) that optimizes the use of white space on the paper. 16
NOTE: When printing from a PictBridge compatible device (see page 15), picture size and number of copies are determined by the devices multi-up and copies settings. Change these settings on your device before printing. If the picture size option selected on your device does not match any of the picture size options on the printer dock, the closest available picture size option on the printer dock is automatically selected.

Removing the perforated tabs from the paper
IMPORTANT: Remove perforated tabs only after printing. Paper missing perforated tabs will not feed properly. 1 Fold the tabs up, then down. 2 Remove each tab and discard.

Installing software

Macintosh computers
Power Mac G3, G4, G5, G4 Cube, iMac;
Minimum system requirements
Windows OS-based computers
Windows 98, 98SE, ME, 2000 SP1, or
XP OS Internet Explorer 5.01 or higher 233 MHz processor or greater 64 MB RAM (128 MB RAM for Windows XP OS) 200 MB hard disk space available CD-ROM drive Available USB port Color monitor, 800 x 600 pixels (16-bit or 24-bit recommended)
PowerBook G3, G4; or iBook computers
Mac OS 10.2 or higher Safari 1.0 or higher for complete installation 128 MB RAM 200 MB hard disk space available CD-ROM drive Available USB port Color monitor, 1024 x 768 pixels (thousands
or millions of colors recommended)

Installing the software

IMPORTANT: Install Kodak EasyShare software before connecting the printer dock to the computer. 1 Close all software applications that are open on your computer (including anti-virus software). 2 Place the Kodak EasyShare software CD into the CD-ROM drive.
3 Load the software: Windows OS-based computerif the install window does not appear, choose Run from the Start menu and type d:\setup.exe where d is the drive letter that contains the CD. Mac OS Xdouble-click the CD icon on the desktop, then click the Install icon. 4 Follow the on-screen instructions to install the software. Select Complete to automatically install the most commonly used applications. Select Custom to choose the applications you wish to install. IMPORTANT: To use the printer dock with a computer, you must install the printer driver. If you choose Custom, make sure the printer dock is selected. The printer driver is automatically installed if you choose Typical.
Add the printer for Mac OS X: a Open the finder window and click the Applications button. If you dont see the Applications button, open the Applications folder on your operating drive. b Open the Utilities folder, then double-click Print Center. c In the Printer List window, click the Add Printer button. d Select the printer dock, then click Add. The printer dock is added to your computer. IMPORTANT: When prompted, take a few minutes to electronically register your printer dock and software. This lets you receive information regarding software updates and registers some of the products included with the printer dock. You must be connected to your Internet service provider to register electronically. To register later, visit www.kodak.com/go/register. 5 Restart the computer if prompted. If you turned off anti-virus software, turn it back on. See the anti-virus software manual for details. For more information on installing the software, see the ReadMe file on the Kodak EasyShare software CD. For information on the software applications included on the Kodak EasyShare software CD, click the Help button in the EasyShare software.

Uninstalling the software
If you wish to remove the printer driver or EasyShare software from your computer, use the following procedure: Windows OS-based computer: 1 Open the Control Panel: From the Start menu, select Settings, then select Control Panel. (On Windows XP operating systems, depending on your configuration, Control Panel may be found in the Start menu.) 2 Double-click Add/Remove Programs. 3 Select Kodak EasyShare software, then click Remove. 4 Select Modify to uninstall single components, such as the printer driver, or select Remove to uninstall all components. 5 Follow the on-screen instructions. Restart the computer if prompted. Mac OS X: 1 Double-click the operating drive for your system. 2 Select Library, then select Printers. 3 Open the Kodak folder, then open the printer dock folder. 4 Double-click the printer dock uninstaller program. 5 Follow the on-screen instructions.
Using the printer dock with a computer

Connecting to a computer

IMPORTANT: Make sure your camera is NOT docked when you connect the printer dock to the computer. 1 Make sure Kodak EasyShare software is installed on the computer (see page 20). 2 Plug the labeled end of the USB cable (included) into the labeled USB port on your computer. See your computer documentation for details. 3 Plug the other end of the USB cable into the square USB connector on the back of the printer dock.
Transferring pictures from your digital camera
1 Make sure Kodak EasyShare software is installed (see page 20) and the printer dock is connected to your computer (see page 23). 2 If you have the optional USB card reader, disconnect it from the printer dock. 3 Place the camera on the printer dock (see page 10). 4 Press the Transfer button, , on the printer dock. Kodak EasyShare software opens on your computer (if it is installed). 5 Use Kodak EasyShare software to transfer pictures from the camera to your computer. See the Kodak EasyShare software Help for details. The printer dock Transfer light blinks while the pictures are being transferred. The Transfer light continues to blink until the Transfer or Print button is pressed, the camera is removed from the printer dock, or the connection is no longer available. NOTE: With the software installed, pressing the Transfer button establishes a new drive connection for the docked camera. You can view, copy, delete, and otherwise manage files on the new drive, as you do with other drives on your computer. See your computer documentation for details.

Transferring pictures from a Kodak card reader
The Kodak EasyShare printer dock series 3 is compatible with the Kodak 8-in-1 card reader and the Kodak 6-in-1 card reader (each sold separately). Other Kodak USB card readers may work with the printer dock; however, other manufacturers card readers are not supported. 1 Make sure Kodak EasyShare software is installed (see page 20) and the printer dock is connected to your computer (see page 23). 2 If a camera is docked, remove it. 3 Plug the USB connector from the card reader into the USB connector located on the side of the printer dock. NOTE: If the card reader is already plugged in but the connection is no longer available, disconnect then reconnect the USB cable to re-establish the connection. 4 Insert the memory card into the card reader (see your card reader users guide for details). Do not insert more than one card at a time. 5 Press the Transfer button, , on the printer dock. Kodak EasyShare software opens on your computer (if it is installed). 6 Use Kodak EasyShare software to transfer pictures from the card reader to your computer. See the Kodak EasyShare software Help for details. The printer dock Transfer light blinks while the pictures are being transferred. The Transfer light continues to blink until the Transfer or Print button is pressed, or until the connection is no longer available. NOTE: With the software installed, pressing the Transfer button establishes one or more new drive connections for the card reader. You can view, copy, delete, and otherwise manage files on the new drives, as you do with other drives on your computer. See your computer documentation for details. Purchase a Kodak card reader and other accessories at a retailer of Kodak products, or visit www.kodak.com/go/accessories.

Printing from a computer

We recommend using Kodak EasyShare software (included) for printing. This software lets you take advantage of a wide range of features, including full color enhancement, red-eye reduction, picture organization, and much more. If there are no pictures on your computer, use the printer dock to transfer pictures from your camera or memory card before printing (see page 24). IMPORTANT: Wait until printing is complete before removing paper or the paper tray. Failure to do so can cause paper misfeeds or jams.
Printing with Kodak EasyShare software
1 Make sure Kodak EasyShare software is installed (see page 20) and the printer dock is connected to your computer (see page 23). 2 Click the My Collection tab. 3 Select the pictures you wish to print. 4 Click the Print at Home tab. 5 Make sure the printer dock is selected as the current printer. 6 Change any other settings, such as paper size and print layout, then click Print. NOTE: The Picture Size button on the printer dock is disabled when printing from a computer. Set printing options using EasyShare software. See the EasyShare software Help for details.

Support the printer dock and tray by placing it on a flat, level surface. Do not block the cooling vents. Avoid blocking the back of the printer dock and paper tray exit. Keep power and USB cables away from the paper path. Keep the surrounding area vacuumed and litter-free. Protect the printer dock from tobacco smoke, dust, sand, and liquid spills.
Avoid placing objects on the printer dock. Keep the printer dock, accessories, and supplies away from direct sunlight and out of high-temperature environments (such as a vehicle parked in the sun). When storing, remove the paper tray, then close the paper tray cover (see page 7) and paper tray door to keep out dust and debris. Store paper flat.
Cleaning the paper feed roller
To prevent misfeeds and to make sure your pictures look their best, we recommend that you keep the paper feed roller clean. Inspect the roller weekly for debris particles, and clean if necessary. IMPORTANT: Unplug the power before cleaning the paper feed roller. 1 Unplug the AC power cord from the power outlet. 2 Remove the paper tray from the printer dock, and leave the paper tray door open. 3 Lightly moisten a lint-free cloth with water. IMPORTANT: Do not use cotton or cotton swabs to clean the paper feed roller. 4 Use the moistened cloth to gently wipe clean the surface of the paper feed roller. Advance the feed roller with your thumb as necessary, and continue cleaning. 5 Allow the paper feed roller to fully dry before reconnecting the power.
Traveling with your printer dock
IMPORTANT: When traveling, keep the printer dock, accessories, and supplies away from direct sunlight and out of high-temperature environments (such as a vehicle parked in the sun). Consider purchasing the AC power cord for the region to which you are traveling. 1 Disconnect the power and remove all cables. 2 Remove the paper tray from the printer dock; close the paper tray cover and the paper tray door on the printer dock. 3 Repack the printer dock in the original packing box, or use the optional printer dock travel bag. Purchase an AC power cord, printer dock travel bag, and other accessories at a retailer of Kodak products, or visit www.kodak.com/go/accessories.

Troubleshooting

When you have questions about your printer dock, start here. Additional technical information is available in the ReadMe file located on the Kodak EasyShare software CD. For updates to Troubleshooting information, visit www.kodak.com/go/printerdocks.

Printing problems

If. Try the following Paper does not IMPORTANT: Use only Kodak color cartridge & paper kits for your printer dock. Do not use inkjet paper. feed (Paper light may The paper tray may be empty. Load paper (page 6), re-install the paper glow steady tray, then press. amber) Check the paper:
1 Remove the paper tray (page 7). 2 Inspect the paper supply: make sure paper is not damaged in any

Print is smudged Fingerprints may be on glossy side of paper. Handle paper by the edges or by the removable tabs (page 5). Print is spotted Check to see if the paper is dirty, and use a dry, lint-free cloth to wipe clean. For excessive dirt or debris, thoroughly clean the paper tray, and load new paper (page 6). Check and clean the paper feed roller if necessary (page 31).
NOTE: When storing paper, remove and close the paper tray and paper tray door to keep dust and debris from collecting on the paper or inside the printer dock (page 5).
Print is too light IMPORTANT: Use only Kodak color cartridge & paper kits for your
printer dock. Do not use inkjet paper.
Make sure the paper is loaded with the Kodak logo facing down. Reload
if necessary (page 6). Try re-taking the picture with the flash off. See your camera users guide for details. Adjust the exposure compensation on your camera, and try re-taking the picture. See your camera users guide for details. Edit the picture using Kodak EasyShare software on your computer. See the EasyShare software Help for details. Print is too dark Try re-taking the picture with the flash on, or move within the flash range of the camera. See your camera users guide for details. or is discolored Adjust the exposure compensation on your camera, and try re-taking the picture. See your camera users guide for details. Edit the picture using Kodak EasyShare software on your computer. See the EasyShare software Help for details. Make sure the printer dock is not placed in direct sunlight or is not operating in a high-temperature environment. Make sure the cooling vents are not blocked or dirty (page 1). Pictures are cropped
Change the picture quality setting (or resolution) on your digital camera
to 3:2. See your camera users guide for details. Adjust cropped pictures using Kodak EasyShare software on your computer. If you are printing from an application on your computer, select the proper paper size in print options.
NOTE: Cropping may vary depending on the selected picture size (page 16).
A selected The image file may be corrupt. Review the picture on the camera or computer and delete if necessary. picture does not print. The image file may not be JPEG format. The printer dock can only print JPEG files in standalone mode. Connect to a computer (page 23) and use EasyShare software to print BMP and TIFF formats (page 26).
If. Nothing happens when you try to print Try the following

Check the power connections (page 3). Remove the paper tray, check that paper is properly loaded, and re-install

(page 7).

If the Paper light glows steady amber, load paper (page 6). Make sure the color cartridge is properly installed (page 4). If the Color
cartridge light is on, install a new cartridge. on the printer dock (page 10). printer dock.
Nothing happens when you try to print (from docked camera) Nothing happens when you try to print (from Kodak card reader)
The camera is not properly seated on the connector. Reseat the camera Re-establish the connection: remove, then reseat the camera on the Make sure there is at least one picture in the cameras internal memory

or memory card.

NOTE: The Kodak EasyShare printer dock series 3 is compatible with the Kodak 8-in-1 card reader and the Kodak 6-in-1 card reader (each sold separately). Other Kodak USB card readers may work with the printer dock; however, other manufacturers card readers are not supported.
Check the USB connections from the card reader to the printer dock

(page 14).

Re-establish the connection: disconnect, then reconnect the USB cable
from the card reader to the printer dock. Make sure a memory card is inserted and that there is at least one picture on the memory card.
Nothing Check the USB connections from the PictBridge compatible device to the printer dock (page 15). happens when you try to print Re-establish the connection: disconnect, then reconnect the USB cable from the PictBridge compatible device to the printer dock. (from PictBridge compatible Make sure there is at least one picture in the PictBridge compatible device) devices internal memory or memory card.
Nothing Check the USB connections from the printer dock to the computer (page 23). happens when you try to print The computer may be transferring pictures. Wait a few seconds, then try to again. (from computer) Access the printer menu for your system. Remove check marks next to Pause Printing and Offline, if checked. Close unnecessary software applications. Disconnect then reconnect the USB cable from the printer dock to the computer (page 23). Make sure Kodak EasyShare software is installed (page 20). Install if necessary. If you choose Custom installation, make sure to install the printer driver. Uninstall, then reinstall Kodak EasyShare software (page 20). Make sure your computer meets the minimum system requirements (page 20). Upgrade your system if necessary. Printing is slow NOTE: When printing a large number of prints, printing may slow down to prevent the

print head from overheating.
Make sure the printer dock is not placed in direct sunlight or is not
operating in a high-temperature environment.
Make sure the cooling vents are not blocked or dirty (page 1). Close unnecessary software applications. Make sure your computer meets the minimum system requirements
(page 20). Upgrade your system if necessary.
IMPORTANT: The color cartridge may lock in place if there is a paper Unable to error. Do not attempt to remove the cartridge without remove color cartridge (paper first clearing the paper error. Make sure the Paper light is light may glow off before attempting to remove the cartridge (see Paper steady amber or light under Printer dock status lights, page 41). blink) Check to see if the paper tray is empty or if paper is missing perforated tabs. Reload paper if necessary (page 6), then try again. Make sure paper is not jammed. Clear the jam if necessary (page 34), then try again. Disconnect then reconnect the power and try again. IMPORTANT: Upon reconnecting the power, the color cartridge may advance to the next picture slot on the ribbon, resulting in a supply mismatch (see below).
Paper runs out Supply mismatch can result from several different situations, including: before the color Scrapping of paper as a result of jams or other errors cartridge (or Gradual advancement of the color cartridge ribbon as a result of vice versa) removing ribbon slack or clearing jams Advancement of the color cartridge ribbon upon reconnecting power to unlock the color cartridge Supply mismatch is likely to occur as you continue to use your printer dock. If you wish to keep your cartridge and paper supply synchronized, discard unused cartridge or paper when one or the other is fully depleted.
Transfer/communication problems
If. Try one or more of the following , on the printer dock. Nothing happens Press the Transfer button, when you try to Check the power and USB connections from the printer dock to the transfer pictures to computer (page 23). the computer If you are trying to transfer pictures from a docked camera, make sure to disconnect the optional USB card reader first (page 24). The camera is not properly seated on connector. Reseat the camera on the printer dock (page 10). If you are trying to transfer pictures from a compatible Kodak card reader (page 25) and a camera is docked, remove it. Check the USB connections between the printer dock and the card reader or device.
Close unnecessary software applications, and minimize remaining
application windows. Follow any messages on the screen that may have been hidden by other windows. Disconnect then reconnect the USB cable from the printer dock to the computer (page 23). Make sure Kodak EasyShare software is installed (page 20). Install if necessary. If you choose Custom installation, make sure to install the printer driver. Uninstall, then reinstall Kodak EasyShare software (page 20). Make sure your computer meets the minimum system requirements (page 20). Upgrade your system if necessary.

The camera and battery have been Slowly return the camera and exposed to extreme temperatures. battery to room temperature. Descending blinking green lights The Ni-MH battery pack refresh cycle in progress: discharging (lights turn off as discharging progresses). Leave the camera on the dock to continue refresh cycle (page 11).
Print button/light Light status Light glows steady green Light blinks green Light is off Cause The printer dock is ready for printing. The printer dock is printing. There are no pictures in the camera or on the card. None required. To enable Print: 1 Take pictures. Action/solution None required.
The camera is not docked or a compatible Kodak card reader is 2 Dock the camera, or connect a not connected. compatible Kodak card reader (page 14). If using a card reader, make sure a memory card is inserted. The camera is not properly seated Reseat the camera on the printer on the connector. dock (page 10). The camera or card reader is None required. transferring pictures to the When transfer is complete, press computer, or has established an the blinking Transfer button,. active connection to the computer. A PictBridge compatible device is None required. connected. The Print button is disabled; print command is controlled from the PictBridge compatible device. To print from another source, unplug the PictBridge compatible device.
Picture Size lights Light status One light glows steady green Cause The indicated picture size is available and selected. Action/solution None required. To change picture size, press the Picture Size button repeatedly.

All lights are off

There are no pictures in the camera, To enable the picture size on the card, or on the PictBridge option: compatible device. 1 Take pictures. The camera is not docked, a 2 Dock the camera or compatible Kodak card reader or connect a compatible PictBridge compatible device is not Kodak card reader connected, or a memory card is not (page 14) or PictBridge inserted. compatible device (page 13). If using a card reader, make sure a memory card is inserted. The camera is not properly seated on the connector. Reseat the camera on the printer dock (page 10).
The camera or card reader is None required. transferring pictures to the computer, or has established an active connection to the computer.
Transfer button/light Light status Light glows steady green Light blinks green Cause The printer dock is ready for transferring pictures. Action/solution None required.
Pictures are being transferred None required. to the computer. After transferring pictures, the transfer light continues to blink green until either the Transfer button is pressed again or the connection is no longer available. There are no pictures in the camera or on the memory card. None required. To enable Transfer: 1 Connect printer dock to computer (page 23).

Light is off

The camera is not docked, a compatible Kodak card reader 2 Take pictures. is not connected, or a memory 3 Dock the camera, or connect a card is not inserted. compatible Kodak card reader The printer dock is not (page 14). If using a card reader, connected to the computer. make sure a memory card is inserted. The camera is not properly seated on connector.
Reseat the camera on the printer dock (page 10).
The printer dock is printing in The Transfer button is disabled. standalone mode. The computer is off. Turn on the computer.
Still having problems? Visit www.kodak.com/go/support, or see Chapter 8, Getting help, or contact your camera manufacturer. 46

Printer dock

Getting help
Get support for your product (FAQs, troubleshooting information, etc.) www.kodak.com/go/printerdocks

Helpful links

Purchase full range of digital camera and www.kodak.com/go/accessories dock accessories. Download latest printer dock software, www.kodak.com/go/printerdockdownlo firmware and drivers ads See online tutorials www.kodak.com/go/howto Software Get information on EasyShare software www.kodak.com/go/easysharesw (or click the Help button in the EasyShare software) Get help with the Windows operating www.kodak.com/go/pcbasics system and working with digital pictures Other Get support for Kodak docks, cameras, software, accessories, more Get information on Kodak EasyShare printer docks Get information on Kodak inkjet products Optimize your printer for truer, more vibrant colors Register your printer dock www.kodak.com/go/support www.kodak.com/go/printerdocks www.kodak.com/go/inkjet www.kodak.com/go/onetouch www.kodak.com/go/register
Telephone customer support
If you have questions concerning the operation of the software or printer dock, you may speak with a customer support representative. Before you call, have the camera or dock connected to your computer. Be at your computer, and have the following information available:
Computer model, Operating system Processor type and speed (MHz) Amount of memory (MB) & free hard disk space
Greece Hong Kong India Italy

Battery safety and handling
CAUTION: When removing batteries, allow them to cool first; batteries may be hot.
Read and follow all warnings and instructions supplied by the battery manufacturer. Use only batteries that are approved for this product. Keep batteries out of the reach of children. Do not allow batteries to touch metal objects, including coins. Otherwise, a battery may short circuit, discharge energy, become hot, or leak. Do not disassemble, install backward, or expose batteries to liquid, moisture, fire, or extreme temperature.
Replace all batteries of a set at the same time. Do not mix new batteries with used ones. Do not mix rechargeable and non-rechargeable batteries. Do not mix lithium, Ni-MH, and Ni-Cd batteries together. Do not mix batteries of different chemistry types, grades, or brands. Failure to observe this precaution may cause leakage. Remove batteries when the product is stored for an extended period of time. In the unlikely event that battery fluid leaks inside the product, contact your local Kodak Customer Service representative. In the unlikely event that battery fluid leaks onto your skin, wash immediately with water and contact your local health provider. For additional health-related information, contact your local Kodak Customer Service representative. Dispose of batteries according to local and national regulations. If the battery contacts touch metal objects, the battery may short-circuit, discharge energy, become hot, or leak. Do not charge non-rechargeable batteries.
For more information on batteries, see www.kodak.com/global/en/service/batteries/batteryUsage.jhtml
Upgrading your software and firmware
Download the latest versions of the software included on the Kodak EasyShare software CD and the printer dock firmware (the software that runs on the printer dock). Visit www.kodak.com/go/printerdockdownloads.
Additional care and maintenance
Do not allow chemicals, such as suntan lotion, to come into contact with the painted surface of the printer dock. If the printer dock has been subjected to inclement weather or you suspect water has gotten inside the printer dock, turn off the printer dock and remove the paper tray and color cartridge. Allow all components to air-dry for at least 24 hours before using the printer dock again. If this does not resolve the problem, contact customer support (see page 48). 51

paper tray, i door, i installing, removing, 7 PictBridge compatible device, printing from, 15 picture size and number of copies, 16 button, i changing default, 16 lights, i, 45 printing different pictures on same sheet, 17 printing different sizes/layouts, 16 printing duplicate pictures on same sheet, 18 pictures automatic color correction of, 28 printing different pictures on same sheet, 17 printing duplicate pictures on same sheet, 18 printing from Kodak card reader, 14 printing from PictBridge compatible device, 15 printing tagged, 15 reviewing on camera, 13, 18 selecting number of copies, 12, 13, 16 setting quality, 12 tagging for automatic printing, 12 transferring from camera, 24 transferring from Kodak card reader, 25
power AC adapter & cord, 3 connecting, 3 connector (DC-in), ii, 3 print button/light, i, 44 print order bypassing, 15 creating on camera (tagging pictures), 12 printing, 15 printer driver installing, 20 updating, 47, 51 printing canceling, 19, 29 from a computer, 26 from applications, 27 from docked camera, 13 from Kodak card reader, 14 from PictBridge compatible device, 15 print order, 15 problems, 33 tagged pictures from computer, 27 tagging pictures for, 12 with Kodak EasyShare software, 26 Q quality setting on camera, 12 R recharging. See charging recycling and disposal of batteries, 50 of printer dock, 51
refresh button, i, 11 of Ni-MH rechargeable battery pack, 11 regulatory information Canadian compliance, 55 FCC compliance, 54 VCCI compliance, 55 requirements, system, 20 reviewing pictures on camera, 13, 18 S safety, 50 service and support, 48 setup color cartridge, 4 custom camera insert, 2 loading paper, 6 location for printer dock, 1 paper tray, 7 slot, paper path, ii software help, 47 installing, 20 Kodak EasyShare, printing with, 26 printing from applications, 27 system requirements, 20 uninstalling, 22 upgrading, 47, 51 specifications, 49 status lights, 41 supplies & accessories, ordering, 47 support, technical, 48 system requirements, computer, 20 59
T tagging pictures for printing, 12 telephone support, 48 transfer button/light, i, 46 transferring pictures from camera to computer, 24 from Kodak card reader, 25 problems, 40 traveling with printer dock, 32 tray, paper. See paper tray troubleshooting printing problems, 33 status lights, 41 transferring pictures, 40 U uninstalling software, 22 upgrading software & firmware, 47, 51 URLs, Kodak web sites, 47 USB cable, 14, 15, 23, 25 connector (from device), i, 14, 15, 25 connector (to computer), ii, 23 V VCCI compliance, 55 vents, cooling, ii W warranty, 52 Windows OS installing software on, 20 system requirements, 20 uninstalling software, 22 60

Standard Features CCD resolution 4.23 megapixel (2408x1758 pixels) Image resolution 4.0 megapixel (2304x1728 pixels) Image quality 4.0MP best (print, enlargement) 3.5MP best (optimized ratio for 4" x 6" prints, 3:2) 2.1MP better (small prints) 1.1MP good (e-mail) Lens 3.0X optical zoom, 6.0-18.0 mm (35 mm equivalent: 36-108 mm) 3.3X advanced digital zoom 10X total zoom Auto-focus TTL auto-focus with selectable modes: multi-zone, center-spot Focus range wide: 60 cm (24 in.) to infinity tele: 60 cm (24 in.) to infinity LCD 3.0 in. (7.6 cm) high-resolution (230K pixel) indoor/outdoor display with polarizer and touchscreen with stylus Aperture f/2.9 or f/4.7 (wide), f/4.9 or f/8.1 (tele) Shutter speed 4-1/1400 sec. ISO equivalent automatic, (80-160); manual (80, 100, 200, 400) White balance auto, daylight, tungsten, fluorescent Built-in flash auto, red-eye, fill, off Flash range wide 0.6-3.1 m (2-10.2 ft.) tele 0.6-2.1 m (2-6.9 ft.) Self-timer user selectable, 2-30 seconds Creative Performance Features Scene modes auto, portrait, close-up, self-portrait, museum/manner, night portrait, sport, children, snow, beach, party, landscape, flower, backlight, night landscape and fireworks Close-up mode wide 10-70 cm (4-27 in.) tele 43-70 cm (17-27 in.) Burst mode 2 fps, up to 6 images Color modes high color, standard color, low color, black and white, sepia Exposure metering automatic: TTL-AE; selectable: multi-pattern, center-weighted, center spot Exposure compensation +/-2.0 EV in 0.3 EV step increments Exposure control programmed AE Click to capture < 0.5 sec (wide) Shot to shot < 1.5 sec Video mode continuous MPEG-4 video with audio capture, playback on camera Video resolution VGA (640x480 pixels) at 30 fps Video length up to 80 min. limited by capacity of external memory card Zoom during video 3x optical zoom Selectable sound themes Effortless Operation Auto picture rotation Dedicated buttons power, delete, menu, Share, flash setting, back, info, capture/review mode Review modes slide show, protect, share/print, multi-up, image storage, copy, picture info, favorites, view by date, view by album On camera assistant Video out NTSC, PAL (user-selectable) Software Kodak EasyShare software Dock compatibility Kodak EasyShare printer dock series 3, Kodak EasyShare camera dock series 3 Kodak EasyShare printer dock plus**, Image Link print system compatible Additional Features Storage 256 MB internal memory, SD/MMC card expansion slot Wireless SDIO Wi-Fi 802.11b Power options Kodak rechargeable Lithium-Ion battery KLIC-5000, DC-in jack on side of camera for 5V adapter, via the Kodak EasyShare dock series 3 terminals Image recording format Still: JPEG/EXIF v2.21, Video: Quicktime MOV Interface USB compliant, Kodak EasyShare series 3 docks, audio/video connectors Lens protection built-in lens barrier Tripod mount 1/4 in. standard Weight without batteries: 225 g (7.9 oz.) Dimensions WxHxD: 103x63x26 mm (4.1x2.5x1.0 in.) Warranty one year Minimum System Requirements Windows 98, 98SE, ME, 2000 SP1, or XP OS 233 MHz processor or greater (300 MHz recommended for XP) 64MB RAM (128MB for XP) Internet Explorer 5.01 or higher

ZOOM DIGITAL CAMERA

PowerMac or PowerBook G3, G4, G5; iMac; eMac; or iBook Macintosh OS X 10.2.3-10.2.8, 10.3 or greater 128 MB RAM for OS X (64 MB RAM for OS 8.6/9.x) Safari 1.0 or higher Minimum hardware requirements 200MB hard drive disk space available CD-ROM drive Available USB port Package Contents Kodak EasyShare-one S143 zoom digital camera with built-in lens cover Wrist strap Kodak EasyShare Li-Ion rechargeable battery and charger Stylus Audio/video cable USB cable Kodak EasyShare software Getting Started kit Custom camera insert for optional Kodak EasyShare printer dock and camera dock series 3 Ordering Information Kodak EasyShare-One S143 zoom digital camera xxx xxxx English/French/Spanish Recommended Accessories Kodak EasyShare printer dock series 3 xxx xxxx Kodak EasyShare printer dock plus xxx xxxx Kodak color cartridge and photo paper kit xxx xxxx Kodak EasyShare camera dock series 3 xxx xxxx Kodak Wi-Fi card xxx xxxx Kodak stylus (3-pack) xxx xxxx Kodak EasyShare Picture Viewer xxx xxxx Kodak 8-in-1 card reader xxx xxxx Kodak SD memory cards 512 MB xxx xxxx Kodak EasyShare Li-Ion rechargeable battery (1050 mAh) xxx xxxx Kodak EasyShare Li-Ion rapid battery charger kit xxx xxxx

For more information on the Kodak EasyShare-one 4.0 zoom digital camera, visit www.kodak.com/go/easyshare
Eastman Kodak Company, 2005. Kodak, EasyShare, the Share button, EasyShare-one, Image Link, and the Image Link print system logo are trademarks of Eastman Kodak Company. Schneider-Kreuznach and C-Variogon are trademarks of Jos. Schneider Optische Werke GmbH used under license by Eastman Kodak Company. Product specifications subject to change without prior notice. Simulated LCD display image. IC-xxx CAT No. xxx *Optional Kodak Wi-Fi card sold separately. **Kodak EasyShare-one digital camera is also compatible with the Kodak EasyShare printer dock and camera dock series 3, as well as the Kodak EasyShare printer dock 6000 and camera dock 6000 when used with Kodak adapter kit D-22.