All-in-One Printer

Users Guide

User Guide

Eastman Kodak Company Rochester, New York 14650 Eastman Kodak Company, May 2008 Kodak and EasyShare are trademarks of Eastman Kodak Company. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such marks is under license. 1989-2007 I.R.I.S. (Image Recognition Integrated Systems), All Rights Reserved P/N IK3254 Revision E January 2009

Kodak ESP3 All-in-One

Product Overview....1 Memory Card Slots.... 1 Memory Cards Supported... 1 Control Panel Layout....2 Main Components... 4 USB Port....5 Status Lights...5 AiO Home Center (Windows)... 8 AiO Home Center (Macintosh).. 9 Getting Started.... 11 Printer Location....11 Printing a Demo Page...11 Status Monitor (Windows Only)...11 Setting Options for the Status Monitor...11 Handling and Loading Paper... 13 Loading an Original... 13 Handling Paper....15 Loading the Paper Tray...15 Loading 4 x 6 Photo Paper...16 Loading Envelopes....17 Print..... 19 Transfer Pictures to Computer..19 Transfer to a Windows computer...19 Transfer to a Macintosh computer...20 Print Pictures from a PictBridge Camera..20 Print from a Bluetooth Device...20 Range....21 Bluetooth Name....21 Panoramic Photos...21 Print Layouts.... 22 4x6 Inch Paper... 23 5x7 Inch Paper...24 8x10 Inch Paper... 25 US Letter....26 A4 Paper....X 12 Paper...30
Copy.... 31 Scan.....33 Scan from Control Panel (Windows).. 33 Scan from Control Panel (Macintosh)... 33 Maintenance...35 General Care.... 35 Cleaning the Scanner Glass.... 36 Cleaning the Scanner Lid.... 36 Printing a Test Page... 36 Ink Cartridges.... 37 Checking Ink Levels... 37 Replacing Ink Cartridges... 37 Printhead.... 38 Printhead Alignment.... 39 Clean Printhead... 39 Replace the Printhead... 40 Support.... 43 Contact Kodak....43 Troubleshooting...44 Printer Fails to Power On...44 Device not Recognized...44 Ink Cartridge Not Recognized...45 Multiple Paper Feed...45 Multiple Pictures Not Scanned Properly..45 No Communication with Computer..46 No Paper Feed....47 Paper Jam....47 Printer not Responding...47 Transfer Pictures Failure...48 Wrong Paper Size....48 Print Troubleshooting...48 Envelope Printing Incorrect...48 Multiple-page Document in Reverse Order...49 PictBridge Camera not Detected..49 Picture Cropped...49 Picture Print Smudged...50 Picture Will Not Print...50 Poor Print Quality...50 Print Skewed or Slanted...50 Print Spotted...51 Print Too Dark....51 Print Too Light....51 Printing Slow...51 Printing Stops.... 52 White Edges on Borderless Prints... 52
Copy Troubleshooting.... 52 Copy Cut Off... 52 Scan Troubleshooting... 53 Scan Fails... 53 Scanned Image Blank... 53 Appendix....55 Kodak ESP 3 All-in-One Printer Specifications.. 55 System Requirements.... 57 Paper Supported....58 Safety....58 Parts....59 Power....59 Location....59 Environment....59 Regulatory Compliance...60 FCC Compliance and Advisory...60 FCC and Industry Canada...60 Canadian DOC Statement..60 German Compliance Statement...61 Waste Electrical and Electronic Equipment labeling.61 Glossary....63 Index.... 65

Product Overview

The Kodak ESP 3 All-in-One printer allows you to print, copy, and scan pictures or documents. Many functions can be operated directly from the control panel. In addition, you can print, store, manage, and share your digital pictures with family members and friends using Kodak Home Center software.

Memory Card Slots

You can insert a memory card directly into one of the memory card slots on the Kodak ESP 3 All-in-One printer. The printer supports connection of only one memory card device at a time.
The green LED memory card light located to the left of the memory card slots flashes while the card is being accessed. Important To avoid damage to the memory card, do not remove the card while the LED is blinking.

Memory Cards Supported

The Kodak ESP3 All-in-One printer supports the memory cards used in most digital cameras. XD xD-Picture Card MS Memory Stick, Memory Stick Pro SD Secure Digital Card/Multi-MediaCard CF Compact Flash type I and type II, including microdrives SDHC Secure Digital High Capacity cards The printer also supports the following memory cards with Memory Stick and SD/MMC card slot adapters you can purchase. Memory Stick Duo miniSD MicroSD (TransFlash)

Status Lights

The following tables provide information on the Kodak ESP 3 All-in-One printer status lights.
Light Status All lights and displays are off. All lights flash once. All lights are flashing and the On/Off light is flashing amber. Control Panel Cause The printer is turned off. The printer does not have power applied. The printer is initializing. The printer has detected an error condition. Action/Solution Press On/Off to turn the printer on. Ensure that the power cord is properly plugged into the back of the printer. None. Allow the printer to finish the initialization process. Disconnect power for 5 seconds and reconnect power. If the condition persists, contact Kodak for assistance.
Light Status Check Color Ink light is off.
Check Color Ink light blinks every few seconds. Check Color Ink light is flashing. Check Color Ink light is flashing rapidly.
Check Color Ink Light Cause Normal operation. This light should be off when a color ink cartridge has been properly installed and has enough ink to print. The color ink cartridge ink level is low. The color ink cartridge needs to be replaced. The color ink cartridge needs attention.

Action/Solution None.

Check the ink level in the Home Center or on the printer status monitor (Windows). Replace the color ink cartridge. Ensure that the color ink cartridge is installed properly.
Light Status On/Off light is off.
On/Off Light Cause The printer is turned off. The printer does not have power applied. The printer needs attention.
The On/Off light is steady green. The On/Off light is flashing green.
The printer is properly powered up, on, and ready. The printer is busy.
The printer is initializing.
The printer is calibrating.
The On/Off light is steady amber.
The printer is preparing to print, copy, or scan. The printer has detected an error condition.
Action/Solution Press On/Off to turn the printer on. Ensure that the power cord is properly plugged into the back of the printer. Disconnect the power for 5 seconds and reconnect the power. If the problem persists, contact Kodak for assistance. None. You may start printing, copying, scanning, or other tasks. None. Normal operation when performing a print, copy, scan, or other job request. None. Please wait and allow the printer to complete the initialization process (about 30 seconds). If the flashing green persists, you may have an issue with the printer. Visit www.kodak.com for additional troubleshooting steps or contact your local Kodak Call Center. None. Please wait and allow the printer to complete the calibration process (about 5 minutes). None Disconnect power for 5 seconds and reconnect power. If the condition persists, check the Quantity display for additional codes. Contact Kodak for assistance. Check the status monitor (Windows) on your computer for a message. Please check for other lights and follow the instruction for that light. Check the status monitor (Windows) on your computer for a message.

The On/Off light is flashing red.
The printer has detected an error condition that needs your attention.
Light Status Check Black Ink light is off.
Check Black Ink light blinks every few seconds. Check Black Ink light is flashing. Check Black Ink light is flashing rapidly.
Check Black Ink Light Cause Normal operation. This light should be off when a black ink cartridge has been properly installed and has enough ink to print. The black ink cartridge ink level is low. The black ink cartridge needs to be replaced. The black ink cartridge needs attention. Check Paper Light Cause Normal operation. This light should be off when paper is properly loaded in the paper tray. The paper tray is out of paper, there is a paper jam, or the wrong size paper is loaded.
Check the ink level in the Home Center or on the printer status monitor (Windows). Replace the black ink cartridge. Insure that the black ink cartridge is installed properly.
Light Status Check Paper off. Check Paper flashing red.

light is

Load the paper tray with paper, clear the paper jam, or load the correct size paper. Press Copy to continue.
Light Status Color light is on. Black light is on.
Black and Color Lights Cause Action/Solution Indicates a document will be copied in color. Press Copy Color button to choose Indicates a document will be copied color or black and white output. in black and white. 100% and Fit to Page Lights Cause Action/Solution Indicates a copied document or photo will match the size of the Press Copy Print Size button to choose original as long as the loaded paper 100% or Fit to Page. is the same size or larger. Indicates a copied document or photo will fill the output page with the image, cutting off what won't fit.
Light Status 100% light is on.

Fit to Page light is on.

Light Status 1-9 Flashing C
Quantity Display Cause Indicates the number of copies to be made. Indicates that printhead calibration must be started. The printhead is not installed or not installed correctly.

Flashing E

Action/Solution Press Quantity to select the number of copies you want to make. As needed, load the paper tray with plain paper (Letter-size or A4). Press the Copy button. Remove any ink cartridges that may be installed. Remove the printhead and then re-install the printhead. Re-install the ink cartridges and close the lid. A new calibration sheet will print.

Loading the Paper Tray

You can load the Kodak ESP 3 All-in-One printer with various types of paper ranging from 3 to 8.5 inches wide and from 5 to 14 inches long. The tray capacity is 100 sheets of 20 lb plain paper. You can also load labels and transparencies. Note To avoid fingerprints, handle photo paper by the edges and avoid touching the glossy side of the paper.
1 Pull the paper tray all the way out until the paper guide flips up on the right side.
2 Slide the paper-width guide to its left-most position. 3 Align the edges of a stack of paper. 4 Insert the stack of paper into the paper tray with the print side down.
5 For paper less than 8.5 inches wide, squeeze the paper-width guide and slide it to the right until
it lightly touches the stack of paper.
6 Leave the paper tray open when paper is loaded. 7 Before printing, pull the output tray extender all the way out and pop up the paper stop.
Loading 4 x 6 Photo Paper
You can load up to 30 sheets of 4 x 6 inch (101 x 150 mm) photo paper into the paper tray. Note To avoid fingerprints, handle photo paper by the edges and avoid touching the glossy side of the paper.
1 Remove any other paper from the paper tray. 2 Insert the stack of photo paper into the right side of the paper tray with the short edge forward
and the print side down. Do not overload the paper tray.
3 Slide the stack of paper forward until it stops. 4 Squeeze the paper-width guide and slide it to the right until it just touches the loaded paper.
5 Leave the paper tray open while the paper is loaded.

Loading Envelopes

You can load plain envelopes into the paper tray of your Kodak ESP 3 All-in-One printer. Important Do not use envelopes with cutouts or cellophane windows.
1 Remove any other paper from the paper tray. 2 Insert one or more envelopes into the right side of the paper tray with the print side down and
the envelope flaps on the right, pointing left.
3 Squeeze the paper-width guide and move it to its right-most position up against the envelopes. 4 Leave the paper tray open while the envelopes are loaded.

You can print pictures directly from a PictBridge camera or a Bluetooth device connected to your Kodak ESP 3 All-in-One printer. To print pictures from a PTP camera, mass storage device, or memory card, transfer the pictures to the computer and then print them from the computer.
Transfer Pictures to Computer
After you take pictures with your digital camera, you can transfer them to the computer and print them on your ESP 3 All-in-One printer. You can transfer.jpg,.mov, or.wav files to your computer from PictBridge cameras, memory cards, and USB mass storage devices. Warning Do not attempt to remove a memory card from a slot while it is being accessed. Doing so can damage files on the card. You can safely remove a card only when the memory card status light is not blinking.
Transfer to a Windows computer
To transfer pictures from a PictBridge camera
1 On the front printer panel, connect a PictBridge camera to the USB port. The KODAK All-in-
One Printer Software dialog open on the PC monitor.
2 On the KODAK All-in-One Printer Software dialog, select Transfer my pictures and click OK. 3 Complete the file transfer with Kodak EasyShare. If Kodak EasyShare is not installed, follow the
instructions in the Scanner and Camera wizard to complete the transfer. To transfer pictures from a memory card
1 On the front printer panel, insert a memory card into one of the memory card slots. The
KODAK All-in-One Printer Software dialog open on the PC monitor.
2 On the KODAK All-in-One Printer Software dialog, select Transfer my pictures and click OK. 3 On the Select Device dialog, select the device you want to use and click OK. 4 Complete the file transfer with Kodak EasyShare. If Kodak EasyShare is not installed, follow the
instructions in the Scanner and Camera wizard to complete the transfer. To transfer pictures from a USB storage device
1 On the front printer panel, insert a USB storage device into the USB port. The KODAK
All-in-One Printer Software dialog open on the PC monitor.
instructions in the Scanner and Camera wizard to complete the transfer.

Chapter 4

Transfer to a Macintosh computer
To transfer from a PictBridge camera
1 On the front printer panel, connect a PictBridge camera to the USB port. 2 When a transfer or connection message appears on your computer monitor, click Yes. 3 Complete the file transfer with Kodak EasyShare. If EasyShare is not installed on your computer,
use iPhoto or Image Capture to complete the transfer. To transfer from a memory card
1 On the front printer panel, insert a memory card into one of the memory card slots. 2 Complete the file transfer with Kodak EasyShare. If EasyShare is not installed on your computer,

Layout Borderless Bordered 2 per page 3 per page 4 per page 9 per page A Paper Print Size 8.5 x 11 inches 8 x 10 inches 5 x 7 inches 4 x 6 inches 3.5 x 5 inches 2.5 x 3.25 inches (wallet)
In addition to US Letter size paper, your Kodak ESP 3 All-in-One printer provides picture layout support for the following US and ISO 216 international paper sizes. 4 x 6 inches 5 x 7 inches 8 x 10 inches A4 (21 x 30 centimeters)

4x6 Inch Paper

1 per page borderless

1 per page bordered

2 per page

3 per page

4 per page

9 per page

5x7 Inch Paper

8x10 Inch Paper

US Letter

Panoramic

A4 Paper

4 X 12 Paper

4x6"

3.5x5.5"

4x12"

3.5x11.5"

Panoramic Borderless

Panoramic Bordered

2x3" 2x3"

Non-panoramic Borderless

Non-panoramic 1 per page

2x3"

1.1x1.7" each

Non-panoramic 2 per page

Non-panoramic 3 per page

Non-panoramic 4 per page

Non-panoramic 9 per page
You can copy both pictures and documents directly from the control panel of your Kodak ESP 3 All-in-One printer. The printer produces high-quality color and black & white copies on a variety of paper types, including transparencies. To copy one original
1 Place your original face down on the right front corner of the scanner glass. 2 Press Quantity on the control panel to select the number of copies. 3 Press Copy Print Size to select 100% or Fit to Page. 100% produces a 1 : 1 copy. When the paper loaded is smaller than the original, the copy is

cropped.

Fit to Page produces a 1 : 1 copy only when the original is the same size as the paper loaded.
When the paper loaded is smaller than the original, the original is reduced to fit on the smaller paper size. When the paper loaded is larger than the original, the original is expanded to fill the larger pager size. In either case, the image is scaled such that one dimension of the image fits one dimension of the paper, and the image is cropped on the other dimension. No white space is left of the page.
4 Press Copy Color to select Color or Black & White copies. 5 Press Copy.
To copy multiple pictures to A4 or Letter size paper
1 Load the paper tray with A4 or Letter size photo paper. 2 Place more than one picture face down on the scanner glass. 3 Press Quantity on the control panel to select the number of copies. 4 Press Copy Color to select Color or Black & White copies. 5 Press Copy.

Chapter 7

Maintenance
Scanning is the process of converting text and pictures into an electronic format for your computer. The Scan mode becomes active when you press Scan. The Scan status light is always on when your All-in-One printer is in Scan mode. To use the scan features, your All-in-One printer must be connected to a computer. Important Use the Kodak AiO Home Center software to configure scan settings for the control panel.
Scan from Control Panel (Windows)

To scan to a file

1 Set the Default scan destination to File with the Kodak Home Center software (see Home

Center Help).

2 Place your original face down in the right front corner of the scanner glass. 3 Press Scan. The original is scanned and saved to a file on your computer according to the scan
settings in the Kodak Home Center software. To scan to an application
1 Set the Default scan destination to Application with the Kodak Home Center software (see

Home Center Help).

2 Place your original face down in the right front corner of the scanner glass. 3 Press Scan. The original is scanned into Kodak Home Center where you can open it with the
application of your choice.
Scan from Control Panel (Macintosh)
To scan to a current settings name and location
1 Set the Scan Destination to File with the Kodak Home Center software (see Home Center

Help).

settings in the Kodak Home Center software. To scan and select name and location
1 Set the Scan Destination to Application with the Kodak Home Center software (see Home
2 Place your original face down in the right front corner of the scanner glass. 3 Press Scan. 4 Select a destination from the Save dialog on the computer.
This section provides maintenance information for the Kodak ESP 3 All-in-One printer. The Kodak ESP 3 All-in-One printer requires little maintenance. However, you should regularly clean the scanner glass and lid backing to remove dust and fingerprints. Fingerprints and other debris on the glass or lid backing could slow down performance and affect the accuracy of scanning.

General Care

Important Always disconnect the power on the Kodak ESP 3 All-in-One printer before cleaning. Do not use harsh or abrasive cleaners or organic solvents on the printer or any of its parts. Warning Do not leave items on the scanner glass. The heat of the scanning lamp may cause them to stick. To clean, wipe the outside of the printer with a clean, dry cloth. Keep the surrounding area vacuumed and litter-free. Protect the printer from tobacco smoke, dust, sand, and liquid spills. Avoid placing objects on the printer. Keep the printer, accessories, and supplies away from direct sunlight and out of hightemperature environments. Do not allow chemicals, such as suntan lotion, to come into contact with the painted surface of the printer. If the printer has been subjected to inclement weather or you suspect water has gotten inside the printer, turn it off and let it dry out. If this does not resolve the problem, contact customer support (see Telephone Customer Support). Service agreements are available in some countries. Contact a dealer of Kodak products for more information. For more recycling and or disposal information, contact your local authorities. In the US, visit the Electronics Industry Alliance Web site at www.eiae.org.

Probable Cause Your Kodak printer is not connected to your computer. Corrective Action Make sure your printer is plugged in and turned on. Make sure you are using the proper USB cable.
Check the connection from your computer to your printer. Ensure that the square end of the USB cable is plugged in to the USB port on the back of your printer, and the flat end into a USB port on your computer.
You may need to disconnect other printers or scanners from your computer. After checking connections, restart your computer. Make sure your computer meets the minimum system requirements. Upgrade your system if necessary. For more information on connecting your printer to your computer, see the Setup Guide that came with your printer.

No Paper Feed

Probable Cause The paper tray may be empty, or there may be a problem with the paper in the tray. Important KODAK Inkjet paper is recommended for your Kodak All-in-One printer. Corrective Action If the tray is empty, load paper into the paper tray, then resume printing. Check for a message on the printer status monitor (Windows) on your computer. Check for a problem with the paper in the tray. To check the paper
1 Inspect the paper and make sure no paper sheets are damaged in any way. Reload with new

paper, if necessary.

2 Carefully "fan" the paper to keep the sheets from sticking together. 3 Reload the paper tray. Do not overfill. 4 Press Copy to continue or Cancel to stop.

Paper Jam

Probable Cause The paper did not advance, was not picked up properly from the paper tray, or is lodged inside the printer. Important Kodak Inkjet paper is recommended for your Kodak All-in-One printer. Corrective Action
1 Remove the paper from the tray. 2 Turn off the printer. 3 In the rear access area, pull the paper out from the rollers without tearing it.
Important If the paper tears while removing it, make sure you remove all the torn pieces. More jams are likely to occur when torn pieces are left in the printer.
4 Reload the paper tray. Do not overfill. 5 Turn the printer on. 6 Press Copy to continue or Cancel to stop.

Printer not Responding

Probable Cause The firmware or software is not in a ready state. Corrective Action Turn the printer off and turn it back on. If the problem persists, unplug the power cord from the power supply and plug it back in.
If the problem continues to persist, restart your computer.
Transfer Pictures Failure
Problem Nothing happens when you try to transfer pictures to the computer. Corrective Action Wait a few moments for the image files to be read. Remove the memory card or USB device and reinsert it. Check the power connection to the computer. If you are trying to transfer pictures from a memory card and a PictBridge camera is connected, remove it. Close unnecessary software applications, and minimize remaining application windows. Follow any messages on the screen that may have been hidden by other windows. Disconnect then reconnect the USB cable from the printer to the computer. Make sure you are using the USB cable included with your printer. Make sure your computer meets the minimum system requirements for using your printer (see System Requirements). Upgrade your system if necessary. Note The Kodak printer is compatible with the Kodak 8-in-1-card reader (sold separately). Other Kodak USB card readers may work with the printer, however, other manufacturers card readers are not supported.

Wrong Paper Size

Probable Cause The paper you selected may be larger or smaller than the paper found in the paper tray. Corrective Action
1 Replace the paper in the paper tray with the correct size. 2 Press Copy to continue or Cancel to stop. 3 If the situation continues, contact Kodak support.

Print Troubleshooting

Use this section to resolve print problems.
Envelope Printing Incorrect
Probable Cause The envelopes are not loaded correctly. Corrective Action
1 Remove the envelopes from the paper tray.
2 Straighten the stack of envelopes against a flat surface, and reload the stack into the paper tray
with the flap on top and on the right.
3 Squeeze the paper guide and slide it to the right until it touches the edge of the envelopes.
Multiple-page Document in Reverse Order
Probable Cause The printing settings in the printer driver are set to print the first page of your document first. Corrective Action Configure the printer driver to print the document in reverse order so the pages will be in the correct order when printing is complete. To set a Windows PC to print in reverse order
1 Open Printers and Faxes. 2 Select your Kodak All-in-One printer in the Name column. 3 Click on Select printing preferences on the Printer Tasks list. 4 On the General tab, select Print last page first.
To set a Macintosh to print in reverse order
1 On the File menu, select Print. 2 On the Print dialog, select Paper Handling 3 Select the Reverse Page Order option.
PictBridge Camera not Detected
Check the USB connections from the PictBridge compatible camera or device to the printer. If disconnected, reconnect the USB cable from the PictBridge compatible camera or device to

the printer.

Make sure there is at least one picture in the PictBridge compatible camera or devices internal

memory or memory card.

Make sure the connected camera or device is PictBridge compatible. See your camera or device

users guide for details.

Check the camera batteries.

Picture Cropped

Change the picture quality setting (or resolution) on your digital camera to 3:2. See your camera users guide for details. Adjust cropped pictures using the Kodak Home Center or other image editing software on your computer. If you are printing from an application on your computer, select the proper paper size from the printer options.
Note Cropping may vary depending on the selected picture size and size of the output paper. The dimensions of the photo on the camera are slightly different than each paper size so a portion will be cropped to fit perfectly on whatever paper size was selected.

Usage Plain paper

Plain paper labels Index card stock Transparency and labels Iron-on transfers Envelopes

Safety

Read and follow these cautions and warnings before using Kodak products. Always follow basic safety procedures. Follow all warnings and instructions marked on the Kodak ESP 3 All-in-One printer.
Caution Do not disassemble this product; there are no user-serviceable part(s) inside. Refer servicing to Kodak qualified service personnel. Warning Keep out of reach of children. Ink may be harmful if swallowed.
Caution If the power cord or plug is frayed or damaged, the equipment gets wet, or the equipment does not operate normally when the operating instructions are followed, unplug your printer from the power outlet and refer servicing to qualified service personnel. Caution The AC adapter power supply is equipped with a three-wire grounding type plug. If you cannot insert the plug into the power outlet, contact an electrician to check or replace the power outlet. Caution Do not plug the AC adapter into a household extension cord. Caution For added protection from damage during a lightning storm, or any time when your printer and its associated AC adapter will be left unused for long periods of time, unplug the AC adapter from the power outlet. Warning Pushing objects through the equipment openings can result in an electric shock or risk of fire. Warning The use of an accessory attachment that is not recommended by Kodak, such as an AC adapter, could cause fire, electric shock, or injury.

Location

Caution To prevent your printer from overheating do not block or cover the slots and openings in the equipment, place it near a heat register, or install it in a cabinet without proper ventilation. Caution Do not use your printer near water, or spill liquid on it. Warning Do not place your printer on an unstable cart, stand, bracket, or table. Injury to persons and damage to the equipment may occur.

Environment

Caution Excessive dust levels may damage internal parts. Caution Unplug the equipment from the wall outlet before cleaning. Caution Dropping your printer may damage the housing and result in extensive damage that will require repair by a qualified technician to restore normal operation. Warning Do not expose this product to liquid, moisture, or extreme temperatures. KODAK AC adapters are intended for indoor use only. The use of controls, adjustments, or procedures other than those specified herein may result in exposure
to shock and/or electrical or mechanical hazards. Caution Adjust only those controls covered in the operating instructions. For more information, go to www.Kodak.com/go/MSDS.

Regulatory Compliance

FCC Compliance and Advisory
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation. Caution When using the Bluetooth interface with a Kodak printer, the transmitter must not be collocated or operate in conjunction with any other antenna or transmitter.

FCC and Industry Canada

This device complies with Industry Canada RSS-210 and FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Canadian DOC Statement

DOC Class B ComplianceThis Class B digital apparatus complies with Canadian ICES-003. Observation des normes-Class BCet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.
German Compliance Statement
Noise emissions for this equipment do not exceed 70 dBa. This equipment is not intended for use in the work place in accordance with BildscharbV regulations. "Das Gert ist nicht fr die Benutzung am Bildschirmarbeitsplatz gem BildscharbV vorgesehen. Caution There is risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Contact your local Kodak representative or refer to www.kodak.com/go/recycle for additional information on the collection and recovery programs for batteries. Achtung Explosionsrisiko wenn die Batterie durch einen inkorrekten Typen ersetzt wird. Entsorgung der Batterie gemss der Gebrauchsanweisung. Bitte kontaktieren Sie Ihren lokalen Kodak Reprsentanten oder www.kodak.com/go/recycle fr mehr Informationen ber das Sammeln und Wiederverwerten von Batterien.
Waste Electrical and Electronic Equipment labeling
In the European Union, this symbol indicates that when the last user wishes to discard this product, it must be sent to appropriate facilities for recovery and recycling. Contact your local Kodak representative or refer to www.kodak.com/go/recycle for additional information on the collection and recovery programs available for this product.

Glossary

ADF: Automatic Document Feeder
dongle: A small electronic device that plugs into a USB port. dpi: dots per inch DPOF: Digital Print Order File. This file allows the user of a digital camera to define which captured images on the storage card are to be printed, together with information on the number of copies or other image information such as paper size, image title text, image orientation, contact information and more.
EXIF: Exchangeable Image File Format. A standard for storing interchange information in image files, especially those using JPEG compression. Most digital cameras now use the EXIF format.

Grayscale: A grayscale digital image is an image in which the value of each pixel is a single sample. Displayed images of this sort are typically composed of shades of gray, varying from black at the weakest intensity to white at the strongest. Grayscale images are distinct from black-and-white images, which are images with only two colors, black and white; grayscale images have many shades of gray in between.
JPEG: Joint Photographic Experts Group. The name of the committee that developed the image file format. JPEG is a compressed image file format. JPEG is a "lossy" format, which means some quality is lost when the image is compressed.
Kodak Perfect Touch: Automatically corrects for common image flaws and "mistakes," such as shadows, and backlighting. Kodak Perfect Touch technology also enhances the desirable qualities of pictures, for vibrant color and richer detail. This feature is available when scanning or copying pictures. Color restoration and Kodak Perfect Touch can be used together to enhance pictures. This feature is not available when scanning black and white pictures. KPT: Kodak Perfect Touch.
OCR: Optical character recognition.
PictBridge: PictBridge is a Camera and Imaging Products Association standardized technology that allows printing of images between any PictBridge compliant digital camera and any PictBridge compliant printer. Thus, you can print from a memory card in a digital camera directly to a printer, regardless of brand. No computer is necessary. Each device is automatically recognized by the other. The camera compares its PictBridge functions to the functions of the printer. The camera then displays the supported functions on menus on the LCD screen or in the viewfinder. Once a PictBridge digital camera is connected to a compliant printer, print options appear on the camera monitor (LCD). The camera menu system is used to select settings such as print size, layout, media type, and date. You can print a single image displayed on the camera, print two or more images, or print all of the images on the memory card. You can print part of an image by first cropping it within the camera and even create index prints (contact sheets). To find out if a camera or printer is PictBridge compatible, look for the PictBridge logo on the packaging or check the manual for specifications. PTP: Picture Transfer Protocol. A standard for transferring pictures from a digital camera.
red eye: The red-eye effect in flash photography is caused by the light from the flash reflecting off the blood vessels and interior eye tissue in humans. Animal eye glow from reflections is caused by a different internal eye structure, which is much like a mirror. When not enough time elapses between the flash and exposure (as with most compact cameras), the light of the flash occurs too fast for the iris of the eye to close the pupil. The flash of light is focused by the lens of the eye onto the blood-rich retina at the back of the eye. The image of the illuminated retina is then focused by the lens of the eye back to the camera, resulting in a red appearance of the eye on the picture.

borderless... 52

loading paper...13
maintenance... 33 memory cards...1, 44
camera...44 Clean Printhead.. 37 cleaning..34 communication...46 components... 4 computer...46 control panel...2 copy problems... 52 copy troubleshooting.. 52 cropped pictures..49 customer support..41, 42

Originals..13

paper... 13, 48 paper feed... 45, 46 paper jam...47 paper tray... 14 Photo Layout..21, 22, 23 photo paper...15 PictBridge.. 49 power...43 print problems..48, 49, 50, 52 print quality...50 print smudged..50 print spotted...51 print troubleshooting.. 48 printer not responding..47 printhead..36, 38 Printhead Alignment.. 37 printing...18
dark print... 51 demo page...11 diagnostic page...34

envelopes...16

FCC compliance...60

glass...34

regulatory compliance.. 60

Home Center..8, 9

safety...59 scan problems..53 scanner lid..34 slow printing...51 status monitor..11 support... 41, 42
ink cartridge..34, 35, 44 ink levels... 35

jammed paper..47

Letter Paper...24 light print... 51
technical support.. 41, 42 transfer... 17, 48

USB Port... 5, 44

waste labeling.. 60 white edges...52
*1K3254* *1K3254* 1K3254 Rev E

S:10.87

ON THE U.S. ECONOMY AND ITS COMING FROM YOUR * INKJET PRINTER.
SWITCH TO A KODAK ESP ALL-IN-ONE PRINTER AND STOP OVERPAYING FOR INK.

$5 BILLION STAIN

THERE IS A
FIND OUT HOW MUCH YOU OVERPAY FOR INK AT PRINTAND PROSPER.COM
*Based on 2008 U.S. annual desktop printer ink revenue and average ink savings using KODAK ESP 3/5/7/9 All-in-One Printer for documents and photos vs. average ink costs of comparable consumer inkjet printers. Actual results may vary. Visit http:/ /kodak.com/go/inkdata for details. 2009, Kodak. Kodak and ESP are trademarks of Kodak. Simulated images.
FILE PRINTED AT: SCALE: 1 BLEED: None TRIM: 10.87 x 21 SAFETY: None OUTPUT FINAL AT:
None of Actual Size 10.87 x 21 10.87 x 21 10.87 x 21 100%
CLIENT: Eastman Kodak JOB#: EAS_GEN_M80226 SAP#: 10020226 WORK ORDER #: 59348 FILE NAME: EAS_GEN_M80226_A1.R5 ARTIST: RCoralde
PUB: Wall Street Journal, USA Today
PROJ. MGR: Mary Gibney PROD: James Shevlin DATE CREATED: 3-19-2009 11:50 PM
AE: Tyler Helms AD: Richard Chang CW: Morgan Carroll

PUBDATE: 3/29/09

DATE MODIFIED: 3-24-2009 11:40 AM
psd (300 ppi; CMYK; Art:Kodak:Images:Y93409-B-2.psd; 988KB), Y93410-B-2.psd (300 ppi; CMYK; Art:Kodak:Images:Y93410-B-2.psd; 936KB), Y93412-A-2.psd (300 ppi; CMYK; Art:Kodak:Images:Y93412-A-2.psd; 1.1MB), Y93408-B-2.psd (300 ppi; CMYK; Art:Kodak:Images:Y93408-B-2.psd; 1.7MB), Y93407-B-2.psd (300 ppi; CMYK; Art:Kodak:Images:Y93407-B-2. psd; 2.8MB), Y93429-A-1.eps (Art:Kodak:Images:Kodak_Logo Lockups:Y93429-A-1.eps; 4.9MB)
FONT FAMILY: Whitney K (Semibold, Bold, Medium) COLORS: IMAGES: Y93405-B-3.psd (300 ppi; CMYK; Art:Kodak:Images:Y93405-B-3.psd; 3.4MB), Y93404-B-2.psd (507 ppi; CMYK; Art:Kodak:Images:Y93404-B-2.psd; 3.9MB), Y93409-B-2.