Home Center Software

KODAK Home Center Software is installed as part of the software installation on your computer. The Home Center icon will appear on your desktop. Use this icon to start Home Center Software.
Home Center Software for WINDOWS OS-based computers
On a WINDOWS OS-based computer, you can use Home Center Software to browse and edit pictures, print, copy, scan, order supplies, access the Extended User Guide, and configure your all-in-one printer from your computer. You can also access the KODAK Tips and Projects Center Web site or upgrade your printer with a newer version of software and/or firmware. Clicking one of the three icons located in the upper-right corner of Home Center Software does the following:
Home - takes you to the main Home Center Software window from other functions within Home Center Software Tools - displays menu options, including links to Kodak sites, troubleshooting, and maintenance functions Help - displays a Help panel for Home Center Software
Home Center Software for MACINTOSH Computers
On a MACINTOSH Computer, Home Center Software has three panes: Select, Tools, and Maintenance. These panes let you do the following: Select pane select your printer from a list of connected printers and check the printer ink levels. Tools pane start a scan, select scanning settings, change Home Center Software settings, and restore all factory default settings. Maintenance pane print a test page, align and clean the printhead, and initiate an upload of diagnostic data for service personnel. From any pane, you can order supplies from the KODAK Web site and view the status of your printer. From the File menu of Home Center Software, you can check for software updates.

Configuring Your Printer

This chapter presumes that you have set up your printer and that you may or may not have installed the printer software.
Configuring printer settings
Configuring basic NOTE: When you first power on the printer, the printer automatically steps you through the process of selecting the Language. printer settings

c. If your all-in-one printer is listed: Highlight the all-in-one printer that is connected to your network. Select Yes, my printer is listed, then click Next. When your printer is detected, driver installation begins. d. When driver installation is complete, click Done. On a MACINTOSH Computer: a. From the dock, open System Preferences. b. Click Print & Fax. c. Click the + sign to add the printer. d. Select the printer from the list of available printers, then click Add.

Handling Paper

For the best photo printing results, use KODAK Photo Papers, which are optimized to work with KODAK All-in-One Printers. For the best document printing results, use KODAK Document Papers or a paper with the COLORLOK Technology logo on the package. Use only paper that is designed for inkjet printers. When handling paper: Hold the paper by the edges; avoid placing your fingerprints on it. Do not touch the glossy side of photo paper. Store paper flat, away from direct sunlight and heat.

Paper types

You can use: Plain paper 20 to 24 lb / 75 to 90 gsm Photo paper up to 12 mil (290 gsm) Card stock 110 lb / 200 gsm, max Envelopes most standard types Transparencies inkjet variety with white stripe Labels all inkjet varieties on 8.5 x 11-in. or A4 sheets Iron-on transfers all inkjet varieties on 8.5 x 11-in. or A4 sheets

Paper sizes

The printer accepts the following paper sizes: 4 x 6 in. / 101 x 152 mm 4 x 7 in. / 101 x 178 mm 4 x 12 in. / 101 x 305 mm 5 x 7 in. / 127 x 178 mm 8 x 10 in. / 203 x 254 mm 8.5 x 11 in. / 216 x 279 mm 8.5 x 14 in. / 216 x 356 mm A4 (8.27 x 11.69 in. / 210 x 297 mm) A5 (5.83 x 8.27 in. / 148 x 210 mm) A6 (4.13 x 5.83 in. / 105 x 148 mm) B5 (6.93 x 9.48 in. / 176 x 250 mm)
NOTE: Do not load paper smaller than 4 x 6 in. / 101 x 152 mm or A6.

Envelope sizes

The printer accepts the following envelope sizes: C5 (6.38 x 9 in. / 162 x 229 mm) C6 (4.5 x 6.38 in. / 114 x 162 mm) DL (4.31 x 8.69 in. / 110 x 220 mm) US #7 (3.88 x 7.5 in. / 98 x 190 mm) US #9 (3.88 x 8.88 in. / 98 x 225 mm) US #10 (4.13 x 9.5 in. / 105 x 241 mm)
IMPORTANT: Do not load envelopes with cutouts or with cellophane windows.

Loading paper

Loading plain paper
The paper tray capacity is 100 sheets of plain paper. To load plain paper: 1. Open the paper tray.

SD/H C

2. Pull out the paper tray extender until it is fully extended. 3. Lift the paper stop. 4. Make sure the left paper-edge guide is to the far left.

left paper-edge guide

paper stop paper tray extender
5. Carefully fan and stack the paper, then insert it into the tray. 6. Move the paper forward until it stops. 7. Move the left paper-edge guide until it touches the paper.

Loading photo paper

The paper tray capacity is 20 sheets of photo paper. To load photo paper: 1. Remove any paper from the tray. 2. Carefully fan and stack the photo paper, then insert the paper (short side first) into the tray with the logo side facing up. 3. Move the paper forward until it stops. 4. Move the left paper-edge guide until it touches the paper.

Scene Balance

On (default) Off

Add Date to Prints

No (default) Yes No (default) Yes

Save as Defaults

Printing pictures from a memory card
Types of memory Your printer accepts the following memory cards: cards SD Card
SDHC Card MMC Card Memory Stick Variations of the memory cards listed above that require an adapter (for example, MEMORY STICK Duo, miniSD, and microSD) the adapter and the memory card as a unit; do not remove the memory card while leaving the adapter in the printer.
IMPORTANT: If you use a memory card with an adapter, make sure you insert and remove
Printing a picture If you use the default settings, one 4 x 6 in. /101 x 152 mm picture is printed. using the default To print a picture: settings
1. Load photo paper with the logo side facing up (see Loading photo paper, page 9), and move the left paper-edge guide until it touches the paper.
2. Insert the memory card into the memory card slot.
memory card slot left paper-edge guide
3. Press or to display the picture you want to print. 4. Press Start to begin printing.
IMPORTANT: To prevent loss of data from your memory card, do not remove it from the

printer while printing.

Printing pictures To print pictures with options other than the default settings (such as a different using non-default print size, black-and-white instead of color, or a date on the print): photo options 1. Load photo paper with the logo side facing up (see Loading photo paper,
page 9), and move the left paper-edge guide until it touches the paper.
2. Press Back. 3. If necessary, use the navigation buttons to select View and Print Photos. 4. Press OK.
5. Press to select the option you want to change (for example, Quantity, Print Size, Color, Scene Balance, or Add Date to Print).
6. Press to change the selection. 7. Repeat steps 5 and 6 for each option you want to change. 8. When you are done changing options, press to select View Photos, then press OK. 9. Insert the memory card into the memory card slot. 10. Press or to select the picture you want to print, then press OK. A check mark on the LCD indicates the picture is selected. NOTE: To deselect the picture, press OK again. 11. To select additional pictures, press or until the picture is displayed, then press OK. 12. When you are done selecting pictures, press Start to begin printing.

Printing tagged pictures

Some digital cameras let you tag (or mark) pictures on the memory card for printing. This creates a tag that is recognized by the printer. If you choose to print tagged pictures, they will be printed according to the default settings on your printer (unless otherwise specified by the tag from the camera). NOTE: Refer to your camera user guide to determine whether your camera supports tagged (also marked or DPOF) functionality. To print tagged pictures: 1. Load photo paper with the logo side facing up (see Loading photo paper, page 9), and move the left paper-edge guide until it touches the paper.

Maintaining Your Printer

Your printer requires little maintenance. However, Kodak recommends cleaning the scanner glass and lid regularly to remove dust and fingerprints, which affect the quality and accuracy of scanning. Except for cleaning the printer, keep the printer plugged in with AC power turned on. If you use a power strip, don't turn off the power strip. Keep the printhead and ink cartridges in the printer at all times. This helps prevent damage to the printhead. Service agreements are available in some countries. Contact dealers of KODAK Products for more information. For recycling and/or disposal information, contact your local authorities. In the US, go to the Electronics Industry Alliance at www.eia.org or go to www.kodak.com/go/recycle.
General care and cleaning

CAUTION:

Always disconnect the power to the printer before cleaning it. Do not use harsh or abrasive cleaners or organic solvents on the printer or any of its parts. To clean the printer, wipe the outside with a clean, dry cloth. Keep the surrounding area vacuumed and litter-free. Protect the printer from tobacco smoke, dust, sand, other small particles (such as crumbs), and liquid spills. Do not place objects on the printer. Keep the printer supplies away from direct sunlight and out of high-temperature environments. Do not allow chemicals, such as suntan lotion, to come into contact with the painted surface of the printer. If the printer has been exposed to bad weather or has water inside it, turn it off and let it dry completely. If this does not solve the problem, contact Kodak Service & Support.
Cleaning the scanner glass
For good quality copies and scans, ensure the printer's scanner glass and lid backing are clean; dust the exterior as needed.
Do not use abrasives, acetone, benzene, or carbon tetrachloride on the glass, as these chemicals may damage it. Do not pour or spray liquid directly on the glass; the liquid might seep under the glass and damage the printer. To clean the scanner glass: 1. Unplug the printer and raise the scanner lid.
2. Wipe the glass with a soft cloth or sponge, slightly moistened with a nonabrasive glass cleaner. 3. Dry the glass with a lint-free cloth. 4. When finished cleaning, plug in the printer.
Cleaning inside the scanner lid
Minor debris can accumulate on the white document backing located under the scanner lid.
Do not use paper-based wipes, as they can scratch the underside of the scanner lid. Do not use harsh or abrasive cleaners or organic solvents on the printer or any of its parts. To clean the white document backing under the scanner lid: 1. Unplug the printer and raise the scanner lid.
2. Gently clean the underside of the lid with a soft cloth or sponge, slightly moistened with a mild soap and warm water. 3. Dry the underside with a chamois or soft cloth. 4. If the white document backing needs further cleaning, use isopropyl (rubbing) alcohol on a soft cloth, then wipe thoroughly with a cloth damped with water to remove any residual alcohol. 5. When finished cleaning, plug in the printer.

Upgrading software and firmware on a WINDOWS OS-based computer
Upgrading software and firmware on a MACINTOSH Computer
To upgrade the firmware: 1. Go to www.kodak.com/go/esp3250downloads. 2. Connect the printer to the computer with a USB cable (if not currently connected). 3. Select your operating system from the drop-down list. 4. Click Select in the Firmware box. 5. Read the instructions, click Download, then follow the on-screen instructions.
www.kodak.com/go/aiosupport 33
Monitoring and adjusting printer performance
From the control panel, you can perform many tasks to help you keep the printer functioning well.

Checking ink levels

To check the ink levels: 1. Press Home. 2. Press to select Maintenance.
3. With Check Ink Levels selected, press OK. The LCD shows approximate levels of ink in the cartridges so you know when its time to order replacement cartridges.
Resetting factory To reset all defaults to the factory default settings: defaults 1. Press Home.
2. Press to select Printer Settings. 3. Press to select Reset All Settings, then press OK. 4. When you see the message, This will reset printer settings to factory defaults, press OK.

Troubleshooting

Basic troubleshooting
Some problems can be resolved quickly by power cycling the printer: Turn off your printer. Wait five seconds. Turn on the printer. Use the following information to help troubleshoot problems with your printer. For more troubleshooting information, go to: www.kodak.com/go/itg to use our Step-by-Step Solutions and Repair tool for help with problems such as paper jams and image quality. www.kodak.com/go/esp3250support for FAQs and links to other support for your printer. www.kodak.com/go/esp3250downloads to download the latest software and firmware files. www.kodak.com/go/esp3250specs for the recommended system requirements.

Problem

Possible Solutions
Printer does not power on Make sure you are using the power cord that came with your printer. Make sure the power cord is connected to the AC adapter and is plugged into an outlet or power strip. If the USB 2.0 cable was disconnected from the printer, then reconnected, or if power to the printer was interrupted, restart the computer. Printer not detected Make sure your printer is plugged in and turned on. Make sure:

Photo printing features

Photo Printing Features Quantity Print Sizes Up to 99 (may vary for different models of the 3200 series printers) 2 x 3 in. (5 x 7.6 cm) 3.5 x 5 in. (9 x 12.7 cm) 4 x 6 in. (10 x 15 cm) 4 x 7 in. (10 x 18 cm) (Panoramic) 4 x 12 in. (10 x 30 cm) 5 x 7 in. (13 x 18 cm) 8 x 10 in. (20 x 25 cm) US Letter - 8.5 x 11 in. (22 x 28 cm) A4 (21 x 30 cm) Best, Normal, Draft Auto-detect plain paper, photo paper, and transparency Optimize image quality for KODAK Photo Papers with barcode KODAK PERFECT TOUCH Technology with Home Center Software Yes, No Color, Black-and-white On, Off
Quality Auto-detect Media Image Enhancement Add Dates to Prints Color Scene Balance

Copy document features

Copy Document Features Color Quantity Copy Sizes Plain Paper Quality Brightness Black-and-white or color 1 to 99 copies (may vary for different models of the 3200 series printers) Same Size, Fit-to-Page, 20% to 500% (may vary for different models of the 3200 series printers) Best, Normal, Draft 3 to + 3

Copy photo features

Copy Photo Features Color Quantity Copy Sizes Black-and-white or color 1 to 99 copies (may vary for different models of the 3200 series printers) 2 x 3 in. (5 x 7.6 cm) 3.5 x 5 in. (9 x 12.7 cm) 4 x 6 in. (10 x 15 cm) 4 x 7 in. (10 x 18 cm) (Panoramic) 4 x 12 in. (10 x 30 cm) 5 x 7 in. (13 x 18 cm) 8 x 10 in. (20 x 25 cm) US Letter - 8.5 x 11 in. (22 x 28 cm) A4 (21 x 30 cm) Automatic 3 to + 3

Quality Brightness

Scanning features
Scanning Features Scanner Type Maximum Scan Size Functions Contact Image Sensor (CIS) 8.5 x 11.7 in. (21.6 x 29.7 cm) Segmentation scanning Auto-destination OCR

Paper tray features

Paper Tray Features Paper Capacity 100 sheets of 20 lb plain paper 20 sheets of photo paper, up to 12 mil (290 gsm) 20 envelopes 4 x 6 in. to 8.5 x 14 in. (10 x 15 cm to 21.6 x 36 cm)

Tray Size

Ink cartridges
Ink Cartridges Ink Handling Ink Life 2-cartridge, 6-ink system 1-year warranty from date of purchase

Connectivity

Connectivity Protocols Supported Devices Supported Image Formats Supported Number of USB Ports Protocols Supported USB 2.0, DPOF, MIPC WINDOWS OS-based and MACINTOSH Computers, memory cards (SD, MS/Duo, MMC, SDHC) Image printing supports JPEG (EXIF v2.2); does not support progressive JPEG format One rear device port (high speed) USB 2.0, DPOF (Tagged image printing), MIPC

Software support

Software Support Application Support KODAK EASYSHARE Software for photos or third-party image management applications; optical character reader (OCR) support for documents Plain paper, photo paper, envelopes, greeting cards, transparencies with white stripe, labels TWAIN and WIA, WIA2 (VISTA OS) import, including EASYSHARE Software, segmentation scanning Software and firmware updates available through Web support

Media Support Scanner Support Update Support

Physical specifications

Physical Specifications Power US: 110120 V AC, 5060 Hz at 2 A WW: 110-240 V AC, 50-60 Hz at 2 A Output: 36 V DC at 1.6 A 422 x 98 x 181 mm [L H x D] (16.6. x 11.7. x 7.1 in.) 5.6 kg (12.3 lb) 5C (41F) to 35C (95F), 15 to 85% RH (non-condensing and atmospheric pressure to approximately 10,000 ft ASL) 15C (59F) to 30C (86F), and 20 to 80% RH. ENERGY STAR Qualified
Dimensions Weight Operating Range
Full image Quality Environmental Range

Warranty

Warranty Product Printhead One year from purchase (with proof of purchase) One year from purchase (with proof of purchase)

System requirements

The following specifications are subject to change without notice.
WINDOWS OS-based computer
WINDOWS OS-Based Computer Operating System CPU Clock Speed Memory Available Disk Space Interface Removable Drive Other Minimum MICROSOFT WINDOWS XP SP2 OS Celeron 1.2 GHz 512 MB RAM 500 MB available USB 2.0 CD-ROM Internet access capability Recommended MICROSOFT WINDOWS VISTA OS 32- or 64-bit processor 2 GHz 1024 MB RAM 500 MB available USB 2.0 CD-ROM Internet access capability

MACINTOSH Computers

MACINTOSH Computers Operating System CPU Clock Speed Memory Available Disk Space Interface Removable Drive Other Minimum MACINTOSH OS X 10.4.8 PowerPC G4, G5, or Intel Based Mac 1.2 GHz 512 MB RAM 200 MB available USB 2.0 Full Speed CD-ROM Internet access capability Recommended OS X 10.4.8 or later Intel Based Mac 2 GHz 1024 MB RAM 200 MB available USB 2.0 High Speed CD-ROM Internet access capability

Paper types supported

Paper Types Supported Plain Paper Photo Paper Card Stock Envelopes Transparencies Labels Iron-on Transfers 20 to 24 lb (60 to 90 gsm) Up to 12 mil (290 gsm) 110 lb index max (200 gsm) 20 to 24 lb (75 to 90 gsm) All commercially available inkjet varieties (with a white stripe) All commercially available inkjet varieties on 8.5 x 11 in. and A4 size sheets All commercially available inkjet varieties on 8.5 x 11 in. and A4 size sheets

Paper sizes supported

Paper Sizes Supported Usage Document Page Sizes Labels Size A4 (210 x 297 mm) A5 (148 x 210 mm) A6 (105 x 148 mm) B5 (176 x 250 mm) US Executive (7.25 x 10.5 in.) (184 x 266 mm) US Letter (8.5 x 11 in.) (216 x 280 mm) US Legal (8.5 x 14 in.) (216 x 356 mm) Custom sizes from 48.5 in. wide and 614 in. long 4 x 6 in. index cards (101 x 152 mm) 5 x 7 in. index cards (127 x 178 mm) A4 (210 x 297 mm) US Letter (8.5 x 11 in.) (216 x 280 mm) C5 (6.38 x 9 in.) (162 x 299 mm) C6 (4.49 x 6.38 in.) (114 x 162 mm) A2 (4.37 x 5.75 in.) (111 x 146 mm) DL (designated long) (4.33 x 8.66 in.) (110 x 220 mm) US #10 (4.12 x 9.5 in) (105 x 241 mm) 4 x 6 in. (102 x 152 mm) 4 x 7 in. (102 x 178 mm) 4 x 12 in. (102 x 305 mm) 5 x 7 in. (127 x 178 mm) 8 x 10 in. (203 x 254 mm) US Letter (8.5 x 11 in.) (216 x 280 mm) A4 (210 x 297 mm) 4 x 5.5 in. (101 x 140 mm) 4 x 8 in. (101 x 203 mm)

Index Card Stock Transparency Iron-on Transfer Label Sizes

Greeting card

Safety information
Always follow all warnings and instructions marked on the product. Use only the power source indicated on the product regulatory label. Use only the power cord that comes with the product. Using another power cord may cause fire and/or shock. Do not use the included power cord with any other equipment.
If you do not use this product for a long period of time, unplug it from the electrical outlet. Always turn this product off by using the On/Off button. Wait until the On/Off button stops flashing before removing the power plug from the outlet. Do not allow the power cord to become damaged or frayed. If you need to use an extension cord with this product, make sure that the ampere rating of the product does not exceed the ampere rating of the extension cord. Place the product on a flat, stable surface that extends beyond the products base in all directions. This product will not operate properly if tilted or at an angle. When storing or transporting this product, do not tilt or stand it on its side. Never turn this product upside down (ink can leak out of the product). Avoid placing this product in an environment that is subject to rapid changes in temperature or humidity, mechanical shocks, vibration, or dust. Do not place near radiators, heating vents, or in direct sunlight. Leave enough room around this product for sufficient ventilation. Do not block this products covers or openings, or insert any objects through slots. Do not use aerosol products inside or around this product. Do not spill any liquid on this product. Do not attempt to repair or service this product. If the power cord or plug is damaged, if any liquid has been spilled onto the product, if the product has been dropped or the case damaged, if the product does not operate normally or exhibits a major change in performance level, unplug this product and contact Kodak at www.kodak.com/go/contact.

LCD screen safety

Use only a dry, soft cloth to clean the LCD screen. Do not use any liquid or chemical cleaners. If the LCD screen is damaged, contact Kodak immediately. If any of the solution from the display gets on your hands, wash then thoroughly with soap and water. If the liquid crystal solution gets into your eyes, flush your eyes immediately with water. If any discomfort or change in vision persists after washing, seek medical attention immediately.

Ink cartridge safety

Keep all ink cartridges out of the reach of children. If ink gets on your skin, wash with soap and water. If ink gets into your eyes, flush immediately with water. If any discomfort or change in vision persists after washing, seek medical attention immediately. For MSDS information on inks, go to www.kodak.com/go/MSDS.
www.kodak.com/go/aiosupport 43

Regulatory compliance

FCC statement
The United states Federal Communications Commission (in CFR 47 Part 15.105) has specified that the following notice be brought to the attention of the users of this product: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver Connect the product into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this product not expressly approved by Eastman Kodak Company might cause harmful interference and void the FCC authorization to operate this product. The radiated energy from this product is well below the FCC radio frequency exposure limits. Nevertheless, the product shall be used in such a manner that the potential for human contact during normal operation is minimized. This product and any attached external antenna, if supported, shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC exposure limits, human proximity shall not be less than 20 cm (8 inches) during normal operation.

Canadian statements

This product meets the applicable Industry Canada technical specifications. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.

Industry Canada (IC) Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your person.
German compliance statement
Noise emissions for this equipment do not exceed 70 dBa. This equipment is not intended for use in the work place in accordance with BildscharbV regulations. Das Gert ist nicht fr die Benutzung am Bildschirmarbeitsplatz gem BildscharbV vorgesehen.
REACH Article 33 declarations
Go to www.kodak.com/go/REACH for information about the presence of substances included on the candidate list according to article 59(1) of Regulation (EC) No. 1907/2006 (REACH).
Waste electrical and electronic equipment labeling
In the European Union, do not discard this product as unsorted municipal waste. Contact your local authorities or go to www.kodak.com/go/recycle for recycling program information.

ENERGY STAR Qualified

ENERGY STAR and the ENERGY STAR mark are registered U.S. service marks. As an ENERGY STAR partner, KODAK has determined that this product meets ENERGY STAR Guidelines for energy efficiency. For more information on the ENERGY STAR program, see www.energystar.gov.

Warranty Information

Limited Warranty
Kodak warrants Kodak consumer electronic products and accessories (Products), excluding batteries, to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty repair.
Limited Warranty Coverage
Warranty service is only available from within the country where the Products were originally purchased. You may be required to send Products, at your expense, to the authorized service facility for the country where the Products were purchased. Kodak will repair or replace Products if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Warranty service will include all labor as well as any necessary adjustments and/or replacement parts. If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak together with proof of the purchase price paid. Repair, replacement, or refund of the purchase price are the sole remedies under this warranty. If replacement parts are used in making repairs, those parts may be remanufactured or may contain remanufactured materials. If it is necessary to replace the entire Product, it may be replaced with a remanufactured Product. Remanufactured Products, parts and materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of repair or replacement, whichever is longer.

Declaration of Conformity
Manufacturer's Name: Manufacturer's Address:
Eastman Kodak Company 16275 Technology Drive San Diego, CA 92127, USA
Declares our sole responsibility that the product Product Name: Power adapters: Radio Module Number:
KODAK ESP 3250 All-in-One Printer
HP-A0601R3, VP-09500084-000 US101
conforms to the following Product Specifications:
Safety: IEC 60950-1:2001 EN 60950-1:2001 + A11:2004 UL 60950-1:2003 R7.06 CAN/CSA-C22.2 No. 60950-1-03 EN 55022:2006+A1:2007, Class B CISPR 22:1997 Class B EN 61000-3-2:2006, Class A EN 61000-3-3:1995+A1:2001 +A2:2005 AS/NZS CISPR 22:2006, Class B EN 61000-4-2:1995 + A1:1998 + A2:2001 EN 61000-4-3:2006 + A1:2008 EN 61000-4-4:2004 EN 61000-4-11:2004 EN 61000-4-8:2001 ED 1.1 CFR 47, FCC Part 15, Subpart B, Class B EN 61000-4-5:2006 EN 61000-4-6:2007 ICES003:2004 Class B ANSI C63.4-2003 EN 301 489-1 V1.8.1 (2008-04) EN 301 489-17 V1.3.2 (2008-04) AS/NZS 4268:2003 + A1:2005 + A2:2006

Radio:

The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC and carries the CE marking. In addition, it complies with the WEEE Directive 2002/96/EC and RoHS Directive 2002/95/EC. The product was tested in a typical configuration.
B Back button, 2 Black print speed, 38 C Cancel button, 2 Changing ink cartridges. See Replacing ink cartridges Cleaning the printer, 24 Components, printer, 1 Configuring your printer, 4 basic printer settings, 4 setting printer as the default printer, 5 Control panel, 1, 2 Copies adjusting settings, 20 changing document options, 17 changing photo options, 19 darkening or lightening, 21 enlarging or reducing a photo, 20 enlarging or reducing documents, 20 making, 17 Copy document features, 39 Copy photo features, 39 D Darkening copies, 21 Date and time setting, 4 synchronizing to your computer, 4 Default printer settings, resetting, 4 Document paper sizes, 43 Downloading latest software and firmware, 36 DPOF. See Tagged images printing E Energy Star qualification, 46 Enlarging or reducing a copy document, 20 photo, 20 Envelopes capacity, 11 loading, 11 sizes, 9 Extender, paper tray, 1 F FAQs, Web support, 36 Firmware, downloading, 36 G Glass, scanner, 1 Greeting card size paper, 43 Guides left paper-edge, 1 right paper-edge, 1 H Home button, 2 Home Center Software, 3 for MACINTOSH Computers, 3 Maintenance pane, 3 Select pane, 3 Tools pane, 3 for WINDOWS OS-based computers, 3 Help icon, 3 Home icon, 3 Tools icon, 3 I Image Capture software, 16 Image formats supported, 40 Index card stock sizes, 43 Ink cartridge replacing, 27 Ink levels, 27 iPhoto software, 16 Iron-on transfers, 43 K KODAK Home Center Software. See Home Center Software L Label sizes, 43 Language, setting, 4 LCD, 1, 2 Left paper-edge guide, 1 Lid, scanner, 1 Lightening copies, 21 Lights power status, 37 Loading paper envelopes, 11 photo, 10 plain, 9

KODAK ESP 3200 Series All-in-One printer
M Maintenance, 24 Marked images, printing. See Tagged images Media supported, 42 Memory card slot, 1 Memory cards printing pictures from, 13 types compatible with printer, 13 Monitoring printer performance, 35 N Navigation buttons, 2 O OK button, 2 On/Off button, 2 Overview of printer, 1 P Panoramic photos, printing, 16 Paper, 8 loading envelopes, 11 photo paper, 10 plain paper, 9 sizes, 8 sizes supported, 43 types, 8 types supported, 42 Paper stop, 1 Paper tray, 1 Paper tray capacity envelopes, 11 photo paper, 10 plain paper, 9 Paper tray extender, 1 Photo paper capacity, 10 loading, 10 Photo paper sizes, 43 Photo printing features, 38 Plain paper capacity, 9 loading, 9 Ports power cord connection, 1 USB, 1 Power status light, 37 Print photos options, 12 Print sizes, 38 Printer access door, 1 Printer performance, monitoring and adjusting, 35
Printer supplies maintaining, 24 recycling, 24 Printhead removing, 31 replacing, 30 Printhead with ink cartridges installed, 1 Printing panoramic photos, 16 tagged image photos, 15 Protecting the printer, 24 R Rear-access cleanout area, 1 Recycling printer or supplies, 24 Reducing or enlarging a copy document, 20 photo, 20 Removing the printhead, 31 Replacing ink cartridges, 27 Right paper-edge guide, 1 S Scanner glass, 1 lid, 1 Scanning, 22 changing settings in Home Center Software, 22 multiple pictures simultaneously, 23 Service agreements, 24 Settings basic printer, 4 Software support, 40 Software, downloading, 36 Start button, 2 Step-by-step solutions and repair, 36 Stop, paper, 1 System requirements, 36 T Tagged images printing, 15 setting, 4 Time to low power, setting, 4 Transferring pictures to a computer, 16 Transparency sizes, 43 Tray capacity envelopes, 11 photo paper, 10 plain paper, 9 Tray, paper, 1 Troubleshooting, 36
U USB port, 1 W Warranty, 40 Water exposure, troubleshooting, 24 Web support www.kodak.com/go/esp3250downloads, 36 www.kodak.com/go/esp3250specs, 36 www.kodak.com/go/esp3250support, 36 www.kodak.com/go/inkjetnetworking, 36 www.kodak.com/go/itg, 36 www.kodak.com/go/recycle, 24

Start Here

All-in-One Printer

Back Ho me

MS SD/H C MM C

3200 Series

Print Copy Scan
Includes Information on the: ESP 3250 All-in-One Printer ESP 3260 All-in-One Printer
Note: A USB 2.0 cable is required to connect your KODAK All-in-One Printer to your WINDOWS or MACINTOSH OS Computer. Available in the KODAK Store or see your local retailer.

1 Unpacking the Printer

Included with your KODAK All-in-One Printer:
Inkjet Printer Software FOR WINDOWS & MACINTOSH

Power Cord and Adapter

Printhead
Black & Color Ink Cartridges

Software CD

IMPORTANT: To view a setup video for your printer, go to
www.kodak.com/go/inkjetvideo.

Back Home

SD/HC MMC
a. Remove all shipping tape from the outside of the printer.
Printer Access Door Scanner Lid

MS SD/HC MMC

b. Lift the printer access door. c. Remove all shipping tape and foam pieces from the inside of the printer. d. Close the printer access door.
www.kodak.com/go/aiosupport

2 Connecting the Power

a. Connect the: power cord to the adapter adapter to the printer power cord to the power source
Do not connect the USB cable to the printer until instructed during software install.
b. Remove the plastic film from the LCD.

Back Hom e

c. Press ON
d. Select your language and press OK.
3 Inserting the Printhead
a. Lift the printer access door.
b. Carefully remove the printhead from its bag. Do not touch the copper-colored contacts. c. Remove the two plastic protective shields.

Carriage

d. Place the printhead into the carriage. Insert at the angle shown.
e. Push firmly against the target label of the printhead until you hear a loud snap.
4 Inserting the Ink Cartridge
a. Remove the black ink cartridge from its bag. b. Carefully remove and discard the orange cap.
Handle ink cartridges carefully to avoid ink transfer.
c. Insert the black ink cartridge into the printhead.
d. Press down on the ink cartridge until you hear it click into position. e. Repeat steps 4a - 4d with the color ink cartridge.
f. Close the printer access door and press OK.
5 Loading Paper and Calibrating

a. Open the paper tray.

Paper Tray
Left Paper-edge Guide b. Pull out the paper tray extender until it is fully extended.

Paper Stop

c. Lift the paper stop.
d. Make sure the left paper-edge guide is to the far left.

Paper Tray Extender

e. Carefully fan and stack the paper, then insert it into the tray.
f. Move the paper forward until it stops. g. Move the left paper-edge guide until it stops.
h. Press Start. Calibration will take two to three minutes.
6 Installing Software on WINDOWS OS
a. Load the KODAK All-in-One Printer Software CD into the CD drive. Follow the on-screen instructions.
FO RW IND OW S& CIN MA TO SH

If the installer window does not open, click Start, then click Computer or My Computer, and double-click the CD drive. NOTE: If your computer does not have a CD drive, go to www.kodak.com/go/downloads to download the software.
b. Connect the USB cable to the USB port on the printer and to your computer. Continue to follow the on-screen instructions until installation is complete.
KODAK Home Center Software for WINDOWS OS
KODAK Home Center is installed with your KODAK All-in-One Printer Software. The Home Center icon will appear on your desktop. You can use it to browse and edit pictures, print, copy, scan, order supplies, access the User Guide, and configure your all-in-one printer from your computer.
7 Installing Software on MACINTOSH OS
a. Connect the USB cable to the USB port on the printer and to your MACINTOSH Computer. b. Load the KODAK All-in-One Printer Software CD into the CD drive. Follow the on-screen instructions. If the installer window does not open, double-click the KODAK All-in-One Printer Software CD icon on the desktop.
FOR WINDOWS & MACINTOSH
KODAK Home Center Software for MACINTOSH OS
KODAK Home Center is installed with your KODAK All-in-One Printer Software. The Home Center icon will appear on your desktop. You can use it to order supplies and configure your all-in-one printer from your computer.

Warranty Information

Limited Warranty
Kodak warrants Kodak consumer electronic products and accessories (Products), excluding batteries, to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty repair.
Limited Warranty Coverage
Warranty service is only available from within the country where the Products were originally purchased. You may be required to send Products, at your expense, to the authorized service facility for the country where the Products were purchased. Kodak will repair or replace Products if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Warranty service will include all labor as well as any necessary adjustments and/or replacement parts. If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak together with proof of the purchase price paid. Repair, replacement, or refund of the purchase price are the sole remedies under this warranty. If replacement parts are used in making repairs, those parts may be remanufactured or may contain remanufactured materials. If it is necessary to replace the entire Product, it may be replaced with a remanufactured Product. Remanufactured Products, parts and materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of repair or replacement, whichever is longer.

Limitations

This warranty does not cover circumstances beyond Kodaks control. This warranty does not apply when failure is due to shipping damage, accident, alteration, modification, unauthorized service, misuse, abuse, use with incompatible accessories or attachments (such as third party ink or ink tanks), failure to follow Kodaks operation, maintenance or repacking instructions, failure to use items supplied by Kodak (such as adapters and cables), or claims made after the duration of this warranty. KODAK MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY FOR THIS PRODUCT, AND DISCLAIMS THE IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. In the event that the exclusion of any implied warranty is ineffective under the law, the duration of the implied warranty will be one year from the purchase date or such longer period as required by law. The option of repair, replacement, or refund is Kodaks only obligation. Kodak will not be responsible for any special, consequential or incidental damages resulting from the sale, purchase, or use of this product regardless of the cause. Liability for any special consequential or incidental damages (including but not limited to loss of revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment, facilities or services or claims of your customers for such damages resulting from the purchase, use or failure of the Product), regardless of cause, or for breach of any written or implied warranty is expressly disclaimed.

Your Rights

Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction. Your statutory rights are not affected.
Outside the United States and Canada
In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.

Safety Information

Read and follow these instructions before using KODAK Products. Always follow basic safety procedures. Follow all warnings and instructions marked on the equipment.

Warning Statements

Do not expose this product to liquid, moisture, or extreme temperatures. KODAK AC Adapters are intended for indoor use only. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. Keep ink cartridges out of reach of children. Ink may be harmful if swallowed. Do not place your all-in-one printer on an unstable cart, stand, bracket, or table. Injury to persons and damage to the equipment may occur. The use of an accessory attachment that is not recommended by Kodak, such as an AC adapter, may cause fire, electric shock, or injury. Pushing objects through the equipment openings can result in an electric shock or risk of fire.

Cautionary Statements

Adjust only those controls covered in the operating instructions. Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. The AC adapter power supply is equipped with 3-wire grounding type plugs. If you cannot insert the plug into the power outlet, contact an electrician to check or replace the power outlet. Do not plug the AC adapter into a household extension cord. If the power cord or plug is frayed or damaged, the equipment gets wet, or the equipment does not operate normally when the operating instructions are followed, unplug your printer from the power outlet and contact Kodak at www.kodak.com/go/contact for further instructions. For added protection from damage during a lightning storm, or any time when your printer and its associated AC adapter will be left unused for long periods of time, unplug the AC adapter from the power outlet and any attached fax line from the printer. To prevent your printer from overheating, do not place it near a heat register, or install it in a cabinet without proper ventilation. Do not use your printer near water or spill liquid on it. Unplug the equipment from the wall outlet before cleaning. Dropping your printer may damage the housing and result in extensive damage that will require repair by a qualified technician to restore normal operation. Excessive dust levels may damage internal parts. For more information, go to www.kodak.com/go/MSDS.
Registration has its rewardsincluding a terrific offer.
Register your KODAK All-in-One Printer and get great support, expert tips, free software downloadsplus a phenomenal deal on inkjet supplies to get you started. Simply register right away when prompted during software installation or on the Web at www.kodak.com/go/register. Registration takes a minutebut the rewards are lasting. Inkjet supplies offer valid for U.S. residents only.

Thank you for purchasing a KODAK All-in-One Printer. In the unlikely event that your printer does not operate as expected, please do not return it to the store.
Do the following steps to begin troubleshooting. 1. Power cycle the printer by unplugging the printer. Wait five seconds, and then plug the power cord back into the printer.
2. Confirm that you are using a USB 2.0 cable. You can purchase a USB 2.0 cable online at www.kodak.com/go/usbcable or at your local retailer.
3. Make sure that you have the most up-to-date software and firmware. Go to www.kodak.com/go/downloads to download the latest files.
For additional assistance:
Go to www.kodak.com/go/aiosupport, select your printer, and view Frequently Asked Questions (FAQs), Step-by-Step Solutions and Repairs, User Guides, and more.
Eastman Kodak Company Rochester, NY 14650 U.S.A. Eastman Kodak Company, 2009 MC/MR/TM: Kodak.

1K5812

Printed in Windows is a registered trademark of Microsoft Corporation. Macintosh is a registered trademark of Apple Inc.