KODAK ESP 7200 Series All-in-One Printer

User Guide

Eastman Kodak Company Rochester, NY 14650 Eastman Kodak Company, 2009 Kodak, EasyShare, and Perfect Touch are trademarks of Eastman Kodak Company. Specifications subject to change without notice. P/N XXXXXX September 2009

Table of contents

1 Printer Overview Components......1 Control panel.....2 Home Center Software..... Configuring Your Printer Configuring printer settings.....4 Connecting to a wireless network....5 Before you connect.....5 Connecting to a wireless network using the WiFi Setup Wizard...5 Setting up an IP address....9 Verifying the network configuration....10 Printing the network configuration....10 Installing your printer on additional computers on the network...10 Connecting to another KODAK All-in-One Printer...10 Adding a network connection to a USB-connected computer... 11 Changing from USB to wireless connection.... 11 Changing from USB to Ethernet connection.... Handling Paper Paper types...... 14 Paper sizes...... 14 Envelope sizes...... 15 Loading paper...... 16 Loading paper in the main paper tray..... 16 Loading legal-size paper in the main paper tray.... 18 Loading the photo paper tray.... 21 Loading envelopes.....Printing Switching paper trays..... 25 Printing documents..... 26 Printing two-sided documents.... 26 Printing pictures..... 28 Printing from a memory card or USB-connected device... 29 Printing from a BLUETOOTH Technology enabled device...35 Printing pictures or documents from a wireless device....35 Transferring pictures to a computer.... 36 Transferring pictures to a WINDOWS OS-based computer... 36 Transferring pictures to a MACINTOSH Computer... Copying Copying a document......37 Using the default settings to copy a document....37 Adjusting the settings and copying a document.... 38
www.kodak.com/go/aiosupport i
Changing the number of copies of a document....39 Enlarging or reducing a document.... 40 Darkening or lightening a copy.... 41 Copying a photograph..... 42 Using the default settings to copy a photograph... 42 Adjusting the settings and copying a photograph.... 43 Changing the number of copies of a photograph... 45 Enlarging or reducing a photograph.... 46 Darkening or lightening a copy of a photograph.... Scanning Before you begin scanning..... 48 Changing the scan settings for scanning from the control panel.. 48 Scanning from the computer..... 49 Scanning multiple pictures simultaneously.... 50 Scanning from the control panel....Maintaining Your Printer General care and cleaning....53 Cleaning the scanner glass and document backing... 54 Replacing ink cartridges.....56 Replacing the printhead.....59 Updating the software and printer firmware....63 Updating if your printer is connected to a computer with WINDOWS OS..63 Updating if your printer is connected to a computer with MAC OS.. 64 Monitoring and adjusting printer performance.... 64 Checking ink levels..... 64 Resetting factory defaults.....Troubleshooting Basic troubleshooting..... 66 Getting help on the Web..... 68 Status lights...... 69 Power status light..... 69 Wi-Fi status light..... Product and Safety Specifications Features and Specifications..... 70 Print performance..... 70 Photo printing features..... 70 Copy document features.....71 Copy photo features....71 Scanning features......71 Bottom input paper tray.....72 Top input paper tray.....72
www.kodak.com/go/aiosupport
Output paper tray..... 72 Ink cartridges..... 72 Connectivity..... 72 Software support......73 Physical specifications....73 Warranty......73 System requirements..... 74 Safety information..... 77 Regulatory compliance.... 78 FCC statement..... 78 Canadian statements..... 79 German compliance statement.... 79 REACH Article 33 declarations..... 79 Waste electrical and electronic equipment labeling... 79 ENERGY STAR Qualified.....80 Warranty Information.....80 Declaration of Conformity..... 82

Printer Overview

This printer lets you print, copy, and scan pictures and documents. In addition, this printer supports networking, letting you access the printer over a wireless (Wi-Fi) or Ethernet network.

Components

Control panel

Power cord port

View port for photo paper
Output tray extender with paper stop
USB port Ethernet port Rear-access cleanout area Duplexer (pulled out) Printer access door CF card slot Front USB port
14 Output tray 15 Scanner glass
16 Scanner lid 17 Front paper-edge guides
18 Main paper tray 19 Paper tray extender for legal paper 20 Left paper-edge guides 21 Photo paper tray
10 MS/XD/SD card slot 11 Printhead with ink cartridges installed

Feature

Description
Displays pictures, messages, and menus
Navigation buttons Used to navigate menus; scroll through pictures OK button Back button Home button Zoom buttons Start button Cancel button Wi-Fi connectivity LED Selects a menu item, accepts a setting, and continues with the current operation Displays the next higher menu Displays the main menu; toggles between screens Enlarge or reduce the size of the displayed picture Begins copying, scanning, printing, maintenance task, and file transfer Stops the current operation and returns to the menu; displays the next higher menu When lit, signals that the printer is connected to a wireless (Wi-Fi) network; blinks when searching for an available Wi-Fi network or reconnecting to an already configured network Turns the printer on or off

Connecting to a wireless network using the WiFi Setup Wizard
You can use the WiFi Setup Wizard on the printer to connect to your wireless network. Read the following procedures and use the one that is appropriate for your network setup.
Connecting to a listed network
See Before you connect to determine what is needed to connect your printer to the network. To connect to a listed network using the WiFi Setup Wizard: 1. Press Home. 2. Press to select Network Settings, then press OK. 3. With WiFi Setup Wizard selected, press OK. NOTE: The Wi-Fi radio is turned on automatically when you select WiFi Setup Wizard.
The printer searches for available wireless networks within range, then displays the list in order of signal strength. For example:
NOTE: If there are more networks than can be shown on the LCD, a (page down) symbol appears in the bottom right of the display. If you dont see your network in the list or want to change your network, select Rescan for Wireless Networks, then press OK. 4. Press to select your network, then press OK. 5. If your network requires a password, Enter Security String and a keyboard appear on the LCD. Press , , or to select the letters and numbers of your password, using the correct uppercase and lowercase letters. Press OK after each character. When your security string is entered, select DONE, then press OK. To erase a character, select BKSP (backspace), then press OK. To change from uppercase to lowercase, select abc/123, then press OK. To change from lowercase to uppercase, select ABC/123, then press OK. To enter punctuation or symbols, select !@#, then press OK. 6. When the confirmation message appears, press OK. 7. If you havent yet installed the KODAK All-in-One Printer Software that came with your printer, insert the software CD and follow the on-screen instructions to install the software. The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakESP7200+1133).
Connecting to an unlisted network To connect to an unlisted network using the WiFi Setup Wizard:
1. Press Home. 2. Press to select Network Settings, then press OK. 3. With WiFi Setup Wizard selected, press OK. NOTE: The Wi-Fi radio is turned on automatically when you select WiFi Setup Wizard. 4. If your network is configured to not broadcast its SSID (network name) and does not appear in the list, select Unlisted Network, then press OK. 5. Use the keyboard on the LCD to enter the network name. Press , , or to select the letters and numbers of your network name, using the correct uppercase and lowercase letters. Press OK after each character. When you have finished entering the network name, select DONE, then press OK. To erase a character, select BKSP (backspace), then press OK. To change from uppercase to lowercase, select abc/123, then press OK. To change from lowercase to uppercase, select ABC/123, then press OK. To enter punctuation or symbols, select !@#, then press OK. 6. Select WEP or WPA/WPA2 as required for your network's security setup, then press OK. 7. Use the keyboard on the LCD to enter the required security information (password or passphrase), pressing OK after each character. When your security information is entered, select DONE, then press OK. 8. When the confirmation message appears, press OK. 9. If you havent yet installed the KODAK All-in-One Printer Software that came with your printer, insert the software CD and follow the on-screen instructions to install the software. The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakESP7200+1133).

Verifying the network configuration
To verify that you are connected to your wireless network: 1. Press Home. 2. Press to select Network Settings, then press OK. 3. Press to select View Network Configuration, then press OK. The wireless network settings appear on the LCD. If the printer is connected to your network, you will see the network name and the word CONNECTED. 4. To scroll through the information, press. 5. When you are done, press OK.
Printing the network configuration
To print the current network configuration: 1. Load plain paper into the printer. (See Loading paper in the main paper tray, page 16.) 2. Press Home. 3. Press to select Network Settings, then press OK. 4. Press to select Print Network Configuration, then press OK. The printer prints a summary of the network configuration.
Installing your printer on additional computers on the network
To add your printer to another computer(s) on your network, install the KODAK All-in-One Printer Software that came with your printer on each computer. Follow the on-screen instructions.
Connecting to another KODAK All-in-One Printer
If you are connecting to a newer model printer (for example, you already have an ESP 7 printer and now you are adding an ESP 7250 printer), you must install the software for the newer model. If you are connecting to another ESP 7250 printer or to an older model:
On a computer with WINDOWS OS:
1. Select Start > All Programs > Kodak > Kodak Printer Network Setup Utility. If your wireless all-in-one printer (example: KodakESP7200+1133) is not listed: a. Select No, my printer is not listed, then click Next. b. From the drop-down list, select your printer. c. Select Network - Wireless/WiFi, then click Next. When your printer is detected, driver installation begins.
If your wireless all-in-one printer (example: KodakESP7200+1133) is listed: a. Highlight the all-in-one printer that is connected to your network. b. Select Yes, my printer is listed, then click Next. When your printer is detected, driver installation begins. 2. When driver installation is complete, click Done.

On a computer with MAC OS:
1. From the dock, open System Preferences. 2. Click Print & Fax. 3. On a computer with WINDOWS OS: a. Click the + sign to add the printer. b. Select the printer from the list of available printers, then click Add.
Adding a network connection to a USB-connected computer
You can change the way you connect to your printer at any time.
Changing from USB to wireless connection
To change the printer connection type from USB to a wireless (Wi-Fi) network:
If your printer is connected to a computer with WINDOWS OS:
1. On the printer control panel, press Home. 2. Press to select Network Settings, then press OK. 3. Press to select View Network Configuration, press OK, then confirm you have an IP address. 4. If you have not already done so, connect your printer to your wireless network. See Connecting to a wireless network, page 5. 5. On your computer, disable any firewall you have installed until you have successfully completed the installation For more information on firewalls, go to www.kodak.com/go/inkjetnetworking. 6. Select Start > All Programs > Kodak > Kodak Printer Network Setup Utility. If your wireless all-in-one printer (example: KodakESP7200+1133) is not listed: a. Select No, my printer is not listed, then click Next. b. From the drop-down list, select your printer: ESP7200 Series. c. Select Network - Wireless/WiFi, then click Next. When your printer is detected, driver installation begins. If your wireless all-in-one printer (example: KodakESP7200+1133) is listed: a. Highlight the all-in-one printer that is connected to your network. b. Select Yes, my printer is listed, then click Next. When your printer is detected, driver installation begins.
www.kodak.com/go/aiosupport 11
7. When driver installation is complete, click Done. The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakESP7200+1133).
If your printer is connected to a computer with MAC OS:

1. 2. 3. 4.

5. 6. 7. 8.
Disconnect the printer from the computer. On the printer control panel, press Home. Press to select Network Settings, then press OK. Press to select View Network Configuration, press OK, then confirm you have an IP address. If you do not have an IP address, see Connecting to a wireless network, page 5. From the dock, open System Preferences. Click Print & Fax. Click the + sign to add the printer. Select the printer from the list of available printers, then click Add.
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakESP7200+1133).
Changing from USB to Ethernet connection
Before you connect, you need: A functional Ethernet network that includes a router, switch, or hub with an Ethernet port. A Category 5 (or higher) Ethernet cable. To temporarily disable your firewall until the printer is successfully installed and communicating. To change from a USB connect an Ethernet network connection: 1. Unplug the USB cord from your printer and computer. 2. Connect the Ethernet cable to the Ethernet port on the back of the printer.

Manual two-sided printing from a computer with MAC OS
To print two-sided documents from a computer with MAC OS: 1. Load paper into the paper tray. 2. Open the document you want to print, then select File > Print. 3. In the Print dialog box, make sure that Eastman Kodak Company ESP 7200 Series AiO is selected. 4. In the Copies & Pages drop-down menu, select Paper Handling. 5. In the Pages to Print drop-down menu, select Odd Only. 6. In the Page Order drop-down menu, select Reverse. 7. Click Print. 8. When the odd pages have finished printing, remove the printed pages from the output tray. 9. Rotate the printed pages 180 degrees and place them into the paper tray (printed side up). 10. Select File > Print. 11. In the Copies & Pages drop-down menu, select Paper Handling. 12. In the Pages to Print drop-down menu, select Even Only. 13. In the Page Order drop-down menu, select Normal. 14. Click Print.

Printing pictures

You can print pictures with your all-in-one printer from: A memory card inserted into a memory card slot A camera or storage device (such as a flash drive) connected to the front USB port with a USB cable A BLUETOOTH Technology enabled device (with the optional KODAK Wireless 2.0 USB BLUETOOTH Adapter plugged into the front USB port) An iPhone / iPod Touch or BLACKBERRY Device1 (for information, go to www.kodak.com/go/picflick) You can also print pictures using Home Center Software from your computer with WINDOWS OS. Home Center Software lets you edit and enhance your pictures quickly. Open Home Center Software, select Print Pictures, then follow the on-screen instructions. On a computer with either MAC OS or WINDOWS OS, you can print pictures from KODAK EASYSHARE Software or any picture-editing or photo-management software.
1. May not be available with all models.
Printing from a memory card or USB-connected device
You can print pictures from the following cards or USB-connected devices:
MS/XD/SD Card slot MULTIMEDIA Card (MMC) XD Picture Card SECURE DIGITAL (SD) Card SECURE DIGITAL High Capacity (SDHC) Card Variations of the memory cards above that require an adapter (for example, MEMORY STICK Duo, miniSD, microSD, and T-Flash) CF Card slot COMPACTFLASH Card (Types I and II) MICRODRIVE Front USB port
PICTBRIDGE Technology enabled camera Flash drive
IMPORTANT: If you use a memory card with an adapter, make sure you insert and remove
the adapter and the memory card as a unit; do not remove the memory card while leaving the adapter in the printer.
Using default settings to print a picture
To print a picture from a memory card or USB-connected device using the default settings: 1. Insert the memory card into the appropriate slot, or connect the digital camera or portable drive to the front USB port. IMPORTANT: Use only one slot or port at a time.

7. When you have finished changing settings, press Start to begin printing. IMPORTANT: To prevent loss of data from your memory card, do not remove it from the printer while printing.

Printing tagged pictures

Some digital cameras let you tag (or mark) pictures on the memory card for printing. This creates a tag that is recognized by the printer. If you choose to print tagged pictures, they will be printed according to the default settings on your printer (unless otherwise specified by the tag from the camera). NOTE: Refer to your camera user guide to determine whether your camera supports tagged (also marked or DPOF) functionality. To print tagged pictures: 1. Insert the memory card into the appropriate slot.
2. When the Print tagged images? message appears, press Start.
Printing panoramic pictures To print a panoramic picture, load 4 x 12 in. / 101 x 305 mm paper, or US letter or A4 paper in the main paper tray.
1. Insert the memory card into the appropriate slot, or connect the digital camera or portable drive to the front USB port. IMPORTANT: Use only one slot or port at a time.
Press or to select the picture you want to print, then press OK. Press Home. Press to select View and Print Photos, then press OK. to select Bottom Tray. Press to select Tray Selection, then press to select 4 x 12. Press to select Print Size, then press Press Start to begin printing. IMPORTANT: To prevent loss of data from your memory card, do not remove it from the printer while printing.

2. 3. 4. 5. 6. 7.

Zooming and cropping pictures Zooming and cropping lets you print a specific part of your picture. Use the zoom buttons to select a portion of your picture for printing. The crop window matches the aspect ratio of the selected output print size.
To zoom and crop a picture: 1. Insert the memory card into the appropriate slot, or connect the digital camera or portable drive to the front USB port. IMPORTANT: Use only one slot or port at a time.
2. Press or to select the picture you want to crop, then press OK. 3. Press Zoom + to enlarge the picture on the LCD. A red box shows the area that will be printed. NOTE: You can press Zoom + repeatedly to enlarge the picture in increments of 0.25 up to a magnification of 5X. Press Zoom to decrease the magnification in increments of 0.25 back down to 1X. 4. Use the navigation buttons to move the picture on the LCD up, down, left, or right. Only the part of the picture in the red box will print. NOTE: Zooming and cropping does not change the saved picture on the memory card. 5. When you are satisfied with the picture, press OK. The picture appears in the original view with a red box around the portion of the picture that will print. 6. Press Start to begin printing.

Tray Selection

Top Tray (default) Bottom Tray
The printer enlarges or reduces the original to make it the copy size you select. If the selected copy size is smaller than the paper in the paper tray, the printer automatically arranges the pictures to best fit the paper size.
Plain Paper Quality (available only if bottom tray is selected)
Good quality output; prints faster than Best. The highest quality, but the slowest print speed; eliminates the banding effect that sometimes occurs when printing Draft or Normal. The fastest print speed, but the lowest quality. The printer detects photo paper in the paper tray and sets Best quality automatically. Lightens or darkens the copy. Normal is no change from the original; -3 is the darkest; +3 is the lightest. To see a preview of the photograph on the LCD, select Yes. To save settings as the new default, press OK, select Yes, then press OK.
Draft Photo Paper Quality Automatic (default) Normal, -3 to +3 (Normal is default) No (default) / Yes No / Yes

Preview Save as Defaults

Changing the number of copies of a photograph
To change the number of copies: 1. Lift the scanner lid, and place the photograph face down in the right-front corner of the scanner glass.
Close the lid. Press Home. Press to select Copy Photo, then press OK. Make sure Quantity is selected. Press or to select a number. Press Start to begin copying.
Enlarging or reducing a photograph
To enlarge or reduce the size of the copy of the photograph: 1. Lift the scanner lid, and place the photograph face down in the right-front corner of the scanner glass.
Close the lid. Press Home. Press to select Copy Photo, then press OK. To make a copy larger than 5 x 7 in. / 127 x 178 mm, press to select Tray Selection, then press to select Bottom Tray. 6. Press to select Copy Size. 7. Press or to select the copy size. NOTE: Make sure that the paper in the bottom tray is the size and type (plain paper, photo paper, etc.) that you want. 8. Press Start to begin copying.
Darkening or lightening a copy of a photograph
You can make the copy darker or lighter than the original photograph. To darken or lighten the copy: 1. Lift the scanner lid, and place the photograph face down in the right-front corner of the scanner glass.
Close the lid. Press Home. Press to select Copy Photo, then press OK. Press to select Brightness. Press to select a number below zero for a darker copy, or press number above zero for a lighter copy. 7. Press Start to begin copying.

To update the printer firmware:
1. Make sure that your computer is connected to the Internet. 2. Connect the printer to the computer with a USB cable, Ethernet cable, or wirelessly (if not currently connected). 3. Open Home Center Software. 4. Click Tools and Documentation. 5. Under Web Links, click Check for Printer (Firmware) Updates. 6. If there are updates, click Next and follow the on-screen instructions. IMPORTANT: Do not turn off or unplug your printer or your computer during the update.
Updating if your printer is connected to a computer with MAC OS
Make sure that your computer is connected to the Internet. Open Home Center Software. On the File menu, select Check for Updates. If there are updates, follow the on-screen instructions.

To update the firmware:

1. Go to www.kodak.com/go/esp7250downloads. 2. Connect the printer to the computer with a USB cable, Ethernet cable, or wirelessly (if not currently connected). 3. Select your operating system from the drop-down list. 4. Click Select in the Firmware box. 5. Read the instructions, click Download, then follow the on-screen instructions. IMPORTANT: Do not turn off or unplug your printer or your computer during the update.
Monitoring and adjusting printer performance
From the control panel, you can perform tasks to help you keep the printer functioning well.

Checking ink levels

To check the ink levels: 1. Press Home. 2. Press to select Maintenance, then press OK. 3. With Check Ink Levels selected, press OK. The LCD shows approximate levels of ink in the cartridges so you know when its time to order replacement cartridges.
Resetting factory defaults
To reset all defaults to the factory default settings: Press Home. Press to select Printer Settings. Press to select Reset All Settings, then press OK. When you see the message, This will reset printer settings to factory defaults, press OK. NOTE: Resetting factory defaults does not change the date and time, language, country/region, or network settings. 1. 2. 3. 4.

Troubleshooting

Basic troubleshooting
Some problems can be resolved quickly by power cycling the printer: Turn off your printer. Wait five seconds. Turn on the printer. Use the following information to help troubleshoot problems with your printer.

Problem

Printer does not power on

Possible Solutions

Make sure you are using the power cord that came with your printer. Make sure the power cord is connected to the AC adapter and is plugged into an outlet or power strip. If the USB 2.0 cable was disconnected from the printer, then reconnected, or if power to the printer was interrupted, restart the computer. Make sure your printer is plugged in and turned on. If you are using a USB cable, make sure: you have a USB 2.0 cable. that the USB cable is connected to both your printer and your computer. If you are using a wireless connection, make sure: the printer is connected to your wireless network (check the Wi-Fi connectivity LED and the SSID). your router is transmitting data. the firewall (excluding WINDOWS Firewall) is allowing the services needed for your printer. For additional information, go to www.kodak.com/go/inkjetnetworking. For wireless connectivity issues, go to www.kodak.com/go/inkjetnetworking. Open the printer access door and clear any obstructions. Check that the printhead and ink cartridges are installed correctly. (The printhead and ink cartridges are installed correctly when you hear them click into place.) For best results, use KODAK Paper or a paper with the COLORLOK Technology logo on the package. Make sure the paper is loaded correctly (see Loading paper, page 16). For more information, go to www.kodak.com/go/itg, select All-in-one printer, then Print Quality (missing colors, blank prints, etc). www.kodak.com/go/aiosupport

Printer not detected

Wireless connectivity Printhead carriage jam

Print quality

Ink cartridge
Check that KODAK Ink Cartridge(s) are installed. Do not use non-Kodak brand or refilled ink cartridges. Remove, then install the cartridges again. Make sure the cartridges click into place. Check for paper behind the duplexer in the rear-access cleanout area. Remove the duplexer and gently remove any paper from inside the printer. Make sure the paper in the tray is free of tears or creases. Make sure you do not overload the paper tray. For more information, go to www.kodak.com/go/itg. Select All-in-one printer, then Paper jam. If you need to contact Kodak (see www.kodak.com/go/contact), have the following information available: Kodak Service Number (located inside or on the outside of the printer) Printer model number (located on the back of the printer) Computer model, operating system, and version of Home Center Software Exact wording of any error message(s)

Paper jam

Error messages or other problems you cannot resolve

Getting help on the Web

For more troubleshooting information:
Get help with wireless networking. Use our Step-by-Step Solutions and Repair tool to troubleshoot common problems. Search our knowledge base of FAQs (Frequently Asked Questions). Download the latest firmware and software for optimal printer performance. See the recommended system requirements. Get help with problems you cannot resolve. www.kodak.com/go/inkjetnetworking www.kodak.com/go/itg

www.kodak.com/go/esp7250support www.kodak.com/go/esp7250downloads
www.kodak.com/go/esp7250specs Contact Kodak at www.kodak.com/go/contact and have the following information available: Kodak Service Number (located inside the printer when you open the printer access door) Printer model number (located on the control panel above the LCD) Computer model, operating system, and version of Home Center Software

Status lights

The status lights indicate the condition of the printer. There are two status lights on the printer, one that indicates power, the other indicates Wi-Fi status.

Power status light

Power light Off What it means The printer is turned off. Press the on/off button to turn on power. The printer does not have power. Make sure that the power cord is plugged into the back of the printer and into an electrical outlet, and that the electrical outlet has power. The printer is busy. Wait for the printer to finish the task. The printer is ready

Blinking On

Wi-Fi status light
Power light Off Blinks continuously Blinks intermittently What it means The Wi-Fi radio is either turned off or is turned on but not connected to a wireless network. The Wi-Fi radio is turned on and the printer is searching for available wireless networks within range. The Wi-Fi radio is turned on and the printer cannot find any available wireless networks within range, or the Wi-Fi radio connection has been interrupted or is too weak to send signals to and from the printer. To find and connect to an available wireless network within range, press OK, turn the Wi-Fi radio off, and run the WiFi Setup Wizard (see Connecting to a wireless network, page 5). The Wi-Fi radio is turned on and there is a working connection between the printer and a wireless network.
Product and Safety Specifications
The following specifications are subject to change without notice.
Features and Specifications

Print performance

Industry Canada (IC) Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your person.
German compliance statement
Noise emissions for this equipment do not exceed 70 dBa. This equipment is not intended for use in the work place in accordance with BildscharbV regulations. Das Gert ist nicht fr die Benutzung am Bildschirmarbeitsplatz gem BildscharbV vorgesehen.
REACH Article 33 declarations
Go to www.kodak.com/go/REACH for information about the presence of substances included on the candidate list according to article 59(1) of Regulation (EC) No. 1907/2006 (REACH).
Waste electrical and electronic equipment labeling
In the European Union, do not discard this product as unsorted municipal waste. Contact your local authorities or go to www.kodak.com/go/recycle for recycling program information.

ENERGY STAR Qualified

ENERGY STAR and the ENERGY STAR mark are registered U.S. service marks. As an ENERGY STAR partner, KODAK has determined that this product meets ENERGY STAR Guidelines for energy efficiency. For more information on the ENERGY STAR program, see www.energystar.gov.

Warranty Information

Limited Warranty
Kodak warrants Kodak consumer electronic products and accessories (Products), excluding batteries, to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty repair.
Limited Warranty Coverage
Warranty service is only available from within the country where the Products were originally purchased. You may be required to send Products, at your expense, to the authorized service facility for the country where the Products were purchased. Kodak will repair or replace Products if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Warranty service will include all labor as well as any necessary adjustments and/or replacement parts. If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak together with proof of the purchase price paid. Repair, replacement, or refund of the purchase price are the sole remedies under this warranty. If replacement parts are used in making repairs, those parts may be remanufactured or may contain remanufactured materials. If it is necessary to replace the entire Product, it may be replaced with a remanufactured Product. Remanufactured Products, parts and materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of repair or replacement, whichever is longer.

Limitations

This warranty does not cover circumstances beyond Kodaks control. This warranty does not apply when failure is due to shipping damage, accident, alteration, modification, unauthorized service, misuse, abuse, use with incompatible accessories or attachments (such as third party ink or ink tanks), failure to follow Kodaks operation, maintenance or repacking instructions, failure to use items
80 www.kodak.com/go/aiosupport
supplied by Kodak (such as adapters and cables), or claims made after the duration of this warranty. KODAK MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY FOR THIS PRODUCT, AND DISCLAIMS THE IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. In the event that the exclusion of any implied warranty is ineffective under the law, the duration of the implied warranty will be one year from the purchase date or such longer period as required by law. The option of repair, replacement, or refund is Kodaks only obligation. Kodak will not be responsible for any special, consequential or incidental damages resulting from the sale, purchase, or use of this product regardless of the cause. Liability for any special consequential or incidental damages (including but not limited to loss of revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment, facilities or services or claims of your customers for such damages resulting from the purchase, use or failure of the Product), regardless of cause, or for breach of any written or implied warranty is expressly disclaimed.

Your Rights

Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction. Your statutory rights are not affected.
Outside the United States and Canada
In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.
Declaration of Conformity
Manufacturer's Name: Manufacturer's Address:
Eastman Kodak Company 16275 Technology Drive San Diego, CA 92127, USA
Declares our sole responsibility that the product
Product Name: Power adapters: Radio Module Number: KODAK ESP 7250 Series All-in-One Printer HP-A0601R3, VP-09500084-000 WLU6120
conforms to the following Product Specifications:
Safety: IEC 60950-1:2001 EN 60950-1:2001 + A11:2004 UL 60950-1:2003 R7.06 CAN/CSA-C22.2 No. 60950-1-03 EN 55022:2006+A1:2007, Class B CISPR 22:1997 Class B EN 61000-3-2:2006, Class A EN 61000-3-3:1995+A1:2001 +A2:2005 AS/NZS CISPR 22:2006, Class B EN 61000-4-2:1995 + A1:1998 + A2:2001 EN 61000-4-3:2006 + A1:2008 EN 61000-4-4:2004 EN 61000-4-11:2004 EN 61000-4-8:2001 ED 1.1 CFR 47, FCC Part 15, Subpart B, Class B EN 61000-4-5:2006 EN 61000-4-6:2007 ICES003:2004 Class B ANSI C63.4-2003 Radio: EN 301 489-1 V1.8.1 (2008-04) EN 301 489-17 V1.3.2 (2008-04) AS/NZS 4268:2003 + A1:2005 + A2:2006