Avoid areas where ventilation ducts, open doors, or frequent passersby might expose the printer dock and paper to high levels of dust and debris. Airborne dirt particles can affect picture quality. Allow enough space on all sides of the printer dock to let you connect and disconnect cables, change the cartridge, and add paper.
Handling and storing the cartridge and paper

Cartridge

I I I I
Keep cartridges out of the reach of children. For best quality prints, store the cartridge in a location where the temperature does not exceed 85F (30C). To avoid getting fingerprints on the ribbon, handle the cartridge by the spool ends. Keep the cartridge away from direct sunlight and out of high-temperature environments (such as a vehicle parked in the sun). 1
To avoid fingerprints on the paper, handle it by the edges. Do not touch the glossy side of the paper. To store paper, remove the tray and close the cover and door to keep out dust and debris. Store paper flat.
Keep the paper away from direct sunlight and out of high-temperature environments (such as a vehicle parked in the sun).
Attaching the custom camera insert
IMPORTANT: Use the custom insert that came with your digital camera to dock the camera. Depending on your camera connector, you may need the Kodak dock adapter kit D-26. See the instructions included with the dock adapter.
Place the insert tabs into the back slots of the dock. Then press the front tabs down and snap into place. Purchase a custom camera insert for your Kodak EasyShare digital camera and other accessories at www.kodak.com/go/accessories.

Connecting the power

RISK OF ELECTRIC SHOCK: Use only the AC power adapter included with your printer dock. Other adapters or cords can damage your camera, printer dock, or computer. 1 Make sure your camera is not docked on the printer dock. 2 Connect the AC power cord to the AC power adapter, then to the back of the printer dock. NOTE: The AC power adapter included with your printer dock may not require assembly and may be different from the one shown. 3 Connect the AC power adapter into a power outlet. The printer dock turns on. IMPORTANT: Keep the cables clear of the paper path to the front and rear of the printer dock. Purchase an AC power adapter and other accessories at www.kodak.com/go/accessories. IMPORTANT: When traveling, verify that your AC power adapter is compatible in the region to which you are traveling.
Loading the cartridge and paper

IMPORTANT: Use only Kodak color cartridge & photo paper kits with the symbol. Do not use inkjet paper. Reload a new cartridge or more paper when prompted on your docked camera or computer screen. (Kodak color cartridge & photo paper kits are sold separately at a retailer of Kodak products, or visit www.kodak.com/go/accessories.)

Cartridge:

See Handling and storing the cartridge on page 1.

To load the cartridge:

Open the cartridge door.
Insert the cartridge into the chamber until it clicks into place.
Rotate the cartridge spool clockwise just enough to remove the ribbon slack.

Cartridge-release tab

Close the cartridge door. To remove the cartridge, push up on the Cartridge-release tab then pull out the cartridge.
IMPORTANT: Turning the cartridge spool further may reduce the number of prints you can make.
IMPORTANT: The cartridge may lock if there is a paper error. Clear the paper error (see page 31) before you remove the cartridge. 4

Paper:

IMPORTANT: Do not fill the paper tray above the paper-limit line, , inside the paper tray (maximum 30 sheets). To avoid fingerprints, do not touch the glossy side of the paper (see page 2).

To load the paper:

Open the paper-tray cover.
Load the paper, logo side down.
Close the paper-tray cover.
Inserting and removing the paper tray

Inserting the paper tray

Open the paper-tray door.
Insert the paper tray into the chamber until it snaps into place.

Removing the paper tray

Reload the paper tray when prompted on your docked camera or computer screen.
Pull the paper tray out to remove it. When storing or traveling with your printer dock, close the paper-tray door and paper-tray cover, then slide the cover forward to keep out dust and debris.
Setting up your digital camera
Docking and charging the camera
Docking your digital camera lets you make prints directly from the camera, transfer pictures from the camera to the computer, and charge the camera battery. This printer dock is ImageLink print-system compatible. You can dock not only Kodak EasyShare digital cameras, but other brands of ImageLink system-compatible digital devices. NOTE: Not all cameras are compatible for charging on the G610 printer dock. See your camera users guide for dock compatibility.

Docking the camera

1 Connect your printer dock power (see page 3) and attach a custom camera insert (see page 2). 2 Load a Kodak Ni-MH rechargeable digital camera battery KAA2HR, or a Kodak Li-Ion rechargeable digital camera battery into the camera for charging. See your camera users guide. NOTE: Your printer dock charges only Kodak Ni-MH KAA2HR and Li-Ion rechargeable batteries. 3 Place the camera on the printer dock. Push camera down to seat the connector. The battery status light on the printer dock lights up if a rechargeable battery is in the camera, and an initializing message appears on the camera screen. 4 Keep the camera strap clear of the paper path to the front and rear of the printer dock. The camera is now powered by the printer dock instead of the camera battery.

Charging the camera

Make sure your printer dock power is connected (see page 3), and your camera is docked (see page 7). The Kodak Ni-MH rechargeable digital camera battery or Kodak Li-Ion rechargeable digital camera battery in your camera charges up to 3 hours. Camera battery status light on printer dock: Amber = Battery is charging Steady green = Battery charging is complete
You may leave the camera on the printer dock to maintain the charge. NOTE: Charging does not begin immediately after the camera is docked. It may take several minutes before the battery light indicates the charge status.
For Kodak EasyShare camera and dock compatibility, visit www.kodak.com/go/adapterkitchart.
Refreshing the Kodak Ni-MH rechargeable camera battery
IMPORTANT: The battery refresh feature is intended for use with the Kodak Ni-MH rechargeable digital camera battery KAA2HR only. Li-Ion batteries do not require refreshing.
Battery status light - green, when charging is complete.

8 hours for full refresh

NOTE: If you are getting fewer than 20 pictures per charge, you may need to refresh the battery. The refresh cycle completely discharges the battery, then fully charges it. See Extending battery life, page 44. 1 Make sure the Ni-MH rechargeable battery is in the camera. 2 Place your EasyShare camera on the printer dock (see page 7). 3 Press and hold the and Cancel buttons on the printer dock at the same time for 5 seconds, then release the buttons. To purchase a Kodak Ni-MH rechargeable digital camera battery for your digital camera, visit www.kodak.com/go/accessories. See your camera users guide for battery compatibility.
Best camera setting for 4 x 6 inch (10 x 15 cm) prints
Before taking pictures, change the Picture-size setting or resolution on your digital camera to (3:2). This ensures that the pictures you take are proportional to the printer-dock paper, preventing unwanted cropping of your pictures. See your Kodak EasyShare digital camera users guide for more information.
Printing without a computer
IMPORTANT: Wait until printing is complete before you remove the paper, paper tray, or the camera. Failure to do so can cause paper misfeeds or jams.
Printing from your digital camera
1 Take a picture with your camera (see your camera users guide). 2 Place the camera on the printer dock (see page 7). The current or most recent picture appears on the camera screen. To print the current picture, press

(OK/Print button).

To print additional pictures on your camera: Press. Press Press. (OK/Print to select the print quantity. Repeat for each picture you want to print. on the printer dock to locate a picture. To fast scroll, press and hold
The print screen appears. To print all the pictures on your camera, select Print All, then press button). NOTE: If you dont press any buttons after 10 seconds, printing starts automatically.

The paper cycles four times during the printing process. The first three passes apply layers of yellow, magenta, and cyan colors to the print, and the fourth pass applies the Kodak XtraLifeTM coating that protects and preserves the image. IMPORTANT: Do not pull out the print. The printer dock automatically ejects the finished print after the fourth pass.
Selecting pictures on your camera for printing
NOTE: The following procedure pertains to Kodak EasyShare digital cameras. For information on tagging pictures on other brands of ImageLink system-compatible cameras, see the camera users guide. 1 Press the Share button on your camera. 2 Press to locate a picture. 3 Make sure Print is highlighted. (To tag all pictures in the current image storage location for printing, press to highlight Print All.) Press the OK button. 4 Press to select the number of copies (099). The default is one. Zero removes the tag for a selected picture.
To apply a print quantity to other pictures, press the print quantity as is, or press to change it.

to locate them. Keep

5 Press the OK button. 6 Press the Share button to exit.

Printing tagged pictures

If your camera or memory card contains pictures tagged for printing (see page 12 for your camera users guide), the printer dock gives you the option to print tagged pictures first. A message appears on your docked camera screen indicating that tagged pictures have been found: To print tagged picturespress (OK/Print button). The Tagged Print screen appears. Press on your printer dock to make your selection, then press (OK/Print button). Printing starts, and tagged pictures are printed. Print tags are removed from tagged pictures on your camera or card as they are printed. I To bypass printing of tagged picturespress on your camera and select Review All Pictures, then press (OK/Print button). NOTE: If you tagged pictures for printing using your digital camera, instead of printing the current picture, all tagged pictures are printed. NOTE: When printing tagged pictures, the number of copies that are printed is determined by the setting on your camera.
Changing the printed picture layout
1 Follow the steps to print from your digital camera (see page 11). NOTE: You can only change the picture layout if your camera is docked (see page 7). 2 Press on your printer dock to highlight Layout.

3 Press

to change the picture layout.
Number and size of prints per sheet One 4 x 6 in. (102 x 152 mm) picture Up to two 3 x 4 in. (76 x 102 mm) pictures Up to four 2 x 3 in. (51 x 76 mm) pictures Up to nine 1.3 x 2 in. (34 x 51 mm) pictures
Picture Layout setting 1-up (full photo) 2-up 4-up (wallet size) 9-up (mini photo)
NOTE: A panoramic picture prints on multiple sheets if you select the 1-up picture layout setting. 4 Press (OK/Print button) to begin printing, or press Cancel to return to the main review screen. NOTE: If you dont press any buttons after 10 seconds, printing starts automatically.

Avoid placing objects on the printer dock. Keep the printer dock, accessories, and supplies away from direct sunlight and out of high-temperature environments (such as a vehicle parked in the sun). When storing, remove the paper tray, then close the paper-tray cover (see page 6) and paper-tray door to keep out dust and debris. Store paper flat. 25
Cleaning the paper-feed rollers
To prevent misfeeds and to make sure your prints look their best, inspect the paper-feed rollers weekly for debris particles, and clean, if necessary. IMPORTANT: Unplug the power before cleaning the paper-feed rollers. 1 Remove the paper tray from the printer dock, and leave the paper tray door open. 2 Lightly moisten a lint-free cloth with water. (Do not use cotton swabs, harsh or abrasive cleaners, or organic solvents.) 3 Gently wipe clean the surface of the paper-feed rollers. 4 Advance the paper-feed rollers using the moistened lint-free cloth, as necessary, and continue cleaning. 5 Allow the paper-feed rollers to fully dry before reconnecting the power and inserting the paper tray.

Paper-feed rollers

Transporting your printer dock
IMPORTANT: Keep the printer dock, accessories, and supplies away from direct sunlight and out of high-temperature environments (such as a vehicle parked in the sun). Before you pack your printer dock:
Remove the camera, paper tray, and cables
Close the paper-tray door on the printer dock and the paper-tray cover, then slide the cover forward to keep out dust and debris. (See page 5.) IMPORTANT: When traveling, verify that your AC power adapter is compatible in the region to which you are traveling. Repack your printer dock and accessories in the original packing box, or consider purchasing a printer dock travel bag and other accessories at a retailer of Kodak products, or visit www.kodak.com/go/accessories.
Upgrading your printer dock firmware
Connect your printer dock to your computer (see page 19). Download the latest version of the printer dock firmware (the software that runs on the printer dock) to your computer. Visit www.kodak.com/go/printerdockdownloads.

power. (Paper should eject from the rear of the printer dock.) 5 Remove the ejected paper.
IMPORTANT: Always check the paper slot on the back of the printer dock for jammed paper.
IMPORTANT: The cartridge may lock in place if there is a paper jam. Do not
attempt to remove the cartridge without first clearing the paper jam. Make sure there are no paper jam messages on your camera or computer screen before attempting to remove the cartridge. If there is a cartridge jam:
I Push up on the green cartridge-release tab to release the
cartridge. Remove the cartridge.
I Remove any slack from the ribbon. Reinstall the cartridge.

6 Press

Printing stops IMPORTANT: Use only Kodak color cartridge & paper kits (with symbol) for your printer dock. Do not use inkjet paper. during mid-print (paper stops I Check the power connection. feeding) I Check the paper:
1 Remove the paper tray (page 6). 2 Check the paper slot on the back of the printer dock. 3 Remove loose paper from the printer dock. If paper is jammed, see

page 31.

4 Carefully "fan" the paper to keep the sheets from sticking together

(see page 29).

5 Reload the tray. Do not load more than 30 sheets of paper (see upper limit line, , inside tray). 6 Re-install the tray, then press to resume printing.
I Clean the paper-feed rollers (page 26).
Print is smudged I Fingerprints may be on glossy side of paper. Handle paper by the edges (page 2). Print is spotted I Check for dirty paper; wipe paper gently with a dry, lint-free cloth to remove dirt. For excessive dirt or debris, thoroughly clean the paper tray, and load new paper (page 4). Check and clean the paper-feed rollers (page 26).
NOTE: Keep paper in the original protective wrap, and remove and close the paper tray and paper tray door to keep dust and debris from collecting on the paper or inside the printer dock (page 6).
If. Print is too light or underexposed Try the following
IMPORTANT: Use only Kodak color cartridge & paper kits (with symbol) for your printer dock. Do not use inkjet paper.
I Load the paper with the Kodak logo facing down. Reload the paper, if I I I
necessary (page 5). Turn the flash off, then take the picture. See your camera users guide for details. Adjust the exposure compensation on the camera, then take the picture. See your camera users guide for details. Move so the distance between you and the subject is within the effective flash range, then take the picture. See your camera users guide for details. Edit the picture using Kodak EasyShare software on your computer. See the EasyShare software Help for details.

Print is too dark, I Reposition the camera for more available light, then take the picture. See your camera users guide for details. overexposed, or discolored I Use fill flash or change your position so light is not behind the subject, then take the picture. See your camera users guide for details. I Turn the flash on, then take the picture. See your camera users guide for details. I Adjust the exposure compensation on your camera, then take the picture. See your camera users guide for details. I Move so the distance between you and the subject is within the effective flash range, then take the picture. See your camera users guide for details. I Edit the picture using Kodak EasyShare software on your computer. See the EasyShare software Help for details. I Move the printer dock from direct sunlight; operate in a temperature-controlled environment. I Do not block the cooling vents on your printer dock; keep them clean (page 1).
If. Pictures are cropped Try the following
I Change the picture size or resolution on your digital camera to 3:2. See
your camera users guide for details.
I Adjust cropped pictures using Kodak EasyShare software on your
computer. I Select the proper paper size in print options if you are printing from an application on your computer.
NOTE: Cropping may vary depending on the selected picture size (page 15).
A selected I The image file may be corrupt. Review the picture on the camera or computer and delete, if necessary. picture does not print. I The image file may not be JPEG format. The printer dock can only print JPEG files in stand-alone mode. Connect to a computer (page 19) and use Kodak EasyShare software to print BMP and TIFF formats (page 21). Nothing happens when you try to print
I Check the power connections (page 3). I Check the USB cable (page 19) and camera connections (page 7). I Remove the paper tray. Check that paper is properly loaded, then
re-insert the tray (page 6).
I Load paper if paper message appears on your camera or computer. I Make sure the color cartridge is properly installed (page 4). Install a new
cartridge if the cartridge message appears on your camera or computer.
Nothing happens when you try to print (from docked camera)
I Reseat the camera on the printer dock (page 7). I Re-establish the connection. Remove the camera, then reseat it on the
printer dock. I Make sure there is at least one picture in the cameras internal memory or memory card.
Nothing I Make sure your computer meets the minimum system requirements. Upgrade your system, if necessary (see Helpful links, page 40). happens when you try to print I Check the USB connections from the printer dock to the computer (page 19). (from computer) I The computer may be transferring pictures. Cancel the transfer (page 20), then try to print again. I Close unnecessary software applications. Disconnect then reconnect the USB cable from the printer dock to the computer (page 19). I Access the printer menu for your system. Remove check marks next to Pause Printing and Offline, if checked. I Install Kodak EasyShare software (page 17). If you choose Custom installation, make sure to install the printer driver. I Uninstall, then reinstall Kodak EasyShare software (page 17). Printing is slow NOTE: When printing a large number of prints, printing may slow down to prevent

the print head from overheating.
I Move the printer dock from direct sunlight; operate in a
temperature-controlled environment.
I Do not block the cooling vents; keep them clean (page 1). I Close unnecessary software applications. I Make sure your computer meets the minimum system requirements.
Upgrade your system, if necessary (see Helpful links, page 40).
If. Unable to remove color cartridge Try the following
IMPORTANT: The cartridge may lock in place if there is a paper error. Do not attempt to remove the cartridge without first clearing the paper error. Make sure there are no paper error messages on your camera or computer screen before attempting to remove the cartridge.
I Reload or fill the paper tray (page 5). I Clear paper jam (see page 31). I Disconnect then reconnect the power.
IMPORTANT: Upon reconnecting the power, the color cartridge may advance to the next picture slot on the ribbon, resulting in a supply mismatch.
Paper runs out I Supply mismatch can result from several different situations, including: before the color Scrapping of paper as a result of jams or other errors. cartridge (or Gradual advancement of the color-cartridge ribbon from removing vice versa) ribbon slack or clearing jams. Advancement of the color-cartridge ribbon upon reconnecting power to unlock the color cartridge. Supply mismatch is likely to occur as you continue to use your printer dock. If you wish to keep your cartridge and paper supply synchronized, discard unused cartridge or paper when one or the other is fully depleted.
Transfer/communication problems
If. Try one or more of the following , on the printer dock. Nothing happens I Press the Transfer button, when you try to I Check the power and USB connections from the printer dock to the transfer pictures to computer (page 19). the computer I Reseat the camera on the printer dock (page 7). I Close unnecessary software applications and minimize remaining application windows. Follow any messages on the screen that may have been hidden by other windows. I Disconnect then reconnect the USB cable from the printer dock to the computer (page 19). I Make sure your computer meets the minimum system requirements. Upgrade your system if necessary (see Helpful links, page 40). I Install Kodak EasyShare software (page 17). If you choose Custom installation, make sure to install the printer driver. I Uninstall, then reinstall Kodak EasyShare software (page 17).

Printer-dock-status lights
Camera battery light Light status Light is off Cause Camera not properly seated on connector. Unrecognized battery type installed, or camera does not support charging. Action/solution Reseat the camera on the printer dock (page 7). Install a Kodak Ni-MH rechargeable digital camera battery or Kodak Li-Ion rechargeable digital camera battery. See your camera users guide for battery compatibility and other charging options. Connect the AC power cord (page 3). None; dock is checking the charge status of the battery. None required. Leave the camera on the dock to continue charging or to maintain charge. Re-install the battery. Refresh the battery (page 9).
AC power cord not connected. Light glows green Camera just placed on printer dock. Battery fully charged. Light glows amber Battery charging.
Light blinks fast amber Battery not properly installed. Battery exhausted. Light blinks slow amber
Battery or connector pin damaged. Check for damage. The Ni-MH battery refresh cycle in Leave the camera on the dock to progress: discharging (light turns continue refresh cycle (page 9). off as discharging progresses).
Transfer light Light status Light glows green Light blinks green Cause Printer dock ready for transferring pictures. Pictures transferred to the computer. Action/solution None required. None required. After transferring pictures, the transfer light continues to blink green until either the camera is removed, the Transfer button is pressed again, or the connection is no longer available. None required.

Light is off

No pictures in camera or on memory card. Camera not docked.
To enable Transfer: Printer dock not connected to 1 Connect printer dock to computer (page 19). computer.
2 Take pictures. 3 Dock the camera.
Camera not properly seated on Reseat the camera on the printer dock connector. (page 7). Computer off. Turn on the computer.
Still having problems? Visit www.kodak.com/go/support, or see Chapter 8, Getting help, or contact your camera manufacturer.

Printer dock

Getting help
Email, write, or phone Kodak Get support for your product (FAQs, troubleshooting information, etc.) www.kodak.com/go/contact www.kodak.com/go/g610support

Helpful links

Purchase full range of digital camera and www.kodak.com/go/accessories dock accessories. Download latest printer dock software, www.kodak.com/go/printerdockdownlo firmware and drivers ads See online tutorials www.kodak.com/go/howto Software Get information on EasyShare software www.kodak.com/go/easysharesw (or click the Help button in the EasyShare software) Get help with the Windows operating www.kodak.com/go/pcbasics system and working with digital pictures Other Get support for Kodak docks, cameras, software, accessories, more Get information on Kodak EasyShare printer docks Get information on Kodak inkjet products Optimize your printer for truer, more vibrant colors Register your printer dock www.kodak.com/go/support www.kodak.com/go/printerdocks www.kodak.com/go/inkjet www.kodak.com/go/onetouch www.kodak.com/go/register

Remove the battery when the product is stored for an extended period of time. In the unlikely event that battery fluid leaks inside the product, contact Kodak customer support. In the unlikely event that battery fluid leaks onto your skin, wash immediately with water and contact your local health provider. For additional health-related information, contact your local Kodak customer support. Dispose of batteries according to local and national regulations. Visit www.kodak.com/go/kes. Do not charge non-rechargeable batteries. For more information on batteries, see www.kodak.com/go/batterytypes.

Extending battery life

Limit activities such as reviewing pictures/videos on the camera screen, using the camera screen as a viewfinder, and excessive use of the flash. Dirt on the battery contacts can affect battery life. Wipe the contacts with a clean, dry cloth before loading batteries in the camera. Battery performance is reduced at temperatures below 5 C (41 F). When using your camera in cold weather, carry spare batteries and keep them warm. Do not discard cold batteries that do not work; when they return to room temperature, they may be usable. If you are getting fewer than 20 pictures per charge with your Kodak Ni-MH rechargeable digital camera battery, (and if none of the tips above seem to help), consider refreshing the battery (see page 9) or replacing it.
For more information on batteries, see your camera users guide, or visit www.kodak.com/go/batterytypes.
Upgrading your software and firmware
Download the latest versions of the software included on the Kodak EasyShare software CD and the printer dock firmware (the software that runs on the printer dock). Visit www.kodak.com/go/printerdockdownloads.
Additional care and maintenance
Do not allow chemicals, such as suntan lotion, to come into contact with the painted surface of the printer dock. If you suspect water has gotten inside the printer dock, turn off the printer dock and remove the paper tray and color cartridge. Allow all components to air-dry for at least 24 hours before using the printer dock again. Connect a tripod directly to the camera; do not connect a tripod to the camera dock or printer dock. Service agreements are available in some countries. Contact a dealer of Kodak products for more information. This equipment is considered to be electronic equipment and contains parts that are recyclable. As such, this equipment should not be incinerated or disposed of in a landfill. Disposal of this equipment may be regulated in some jurisdictions due to environmental considerations. Disposal of color cartridges should be done in accordance with applicable regulations. For more disposal or recycling information, contact your local authorities. In the US, visit the Electronics Industry Alliance Web site at www.eiae.org.

Your rights

Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction.
Outside the United States and Canada
In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.

Regulatory information

FCC compliance and advisory
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation.

Canadian DOC statement

DOC Class B complianceThis Class B digital apparatus complies with Canadian ICES-003. Observation des normes-Classe BCet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.

Australian C-Tick

Waste Electrical and Electronic Equipment labeling
In the European Union, do not discard the product as unsorted municipal waste. Contact your local authorities or go to www.kodak.com/go/recycle for recycling program information.

Korea Class B ITE

VCCI Class B ITE
A AC power adapter & cord, connecting, 3 accessories & supplies, ordering, 40 attaching custom camera insert, 2 B battery charging lights, 38 extending life, 44 button print, i red eye reduction, 16 transfer, i C cable AC power adapter & cord, 3 USB, 19 camera connector, i preparing for use with printer dock, 7 printing from, 11 tagging pictures for printing, 12 transferring pictures from, 20 Canadian compliance, 49 canceling printing, 16, 24 care & maintenance general, 45 paper feed roller, 26 cartridge. See color cartridge 50
charging lights, battery, 38 Class B ITE, 49 color cartridge door, 4 loading, removing, 4 release tab, ii color, automatic correction, 23 computer connecting printer dock, 19 installing software, 17 printing from, 21 transferring pictures to, 20 connecting power, 3 connector camera, i power (DC-in), ii, 3 USB (from device), i USB (to computer), ii, 19 copies, selecting number of, 11, 12, 14 D DC-in, power connector, ii, 3 door cartridge, 4 paper tray, i, 6 F FCC compliance, 48 firmware upgrade, 27 firmware, upgrading, 40, 45
H help software, 40 troubleshooting, 28 web links, 40 I insert, custom camera, 2 inserting paper tray, 6 installing software, 17 J Japanese compliance, 49 K Kodak EasyShare software help, 40 installing, 17 printing with, 21 Kodak web sites, 40 L layout. See picture size light red eye reduction, 16 lights battery charging, 38 print, i, 39 status, 38 transfer, i M Macintosh OS
installing software on, 17 maintaining printer dock, 25 maintenance general, 45 paper feed roller, 26 multi-up. See picture size P paper feed roller, cleaning, 26 loading, 5 paper tray door, i inserting removing, 6 picture size and number of copies, 15 changing default, 14 printing different sizes/layouts, 14 pictures automatic color correction of, 23 printing tagged, 13 reducing red eye, 16 selecting number of copies, 11, 12, 14 tagging for automatic printing, 12 transferring from camera, 20 power AC adapter & cord, 3 connecting, 3 connector (DC-in), ii, 3 print button/light, i print order bypassing, 13 printing, 13 51
printer dock maintenance, 25 turning on/off, 3 printer dock firmware upgrading, 27 printer dock storage, 25 printer driver installing, 17 updating, 40, 45 printing canceling, 16, 24 from a computer, 21 from applications, 22 from docked camera, 11 print order, 13 problems, 28 reducing red eye, 16 tagged pictures from computer, 21 tagging pictures for, 12 with Kodak EasyShare software, 21 Q quality reducing red eye, 16 R red eye automatic reduction of, 16 button/light, 16 regulatory information Canadian compliance, 49 Class B ITE, 49 FCC compliance, 48 VCCI compliance, 49 52

S setup color cartridge, 4 custom camera insert, 2 loading paper, 5 location for printer dock, 1 paper tray, 6 software help, 40 installing, 17 Kodak EasyShare, printing with, 21 printing from applications, 22 upgrading, 40, 45 specifications, 42 status lights, 38 supplies & accessories, ordering, 40 T tagging pictures for printing, 12 transfer button/light, i, 39 transferring pictures from camera to computer, 20 problems, 37 tray, paper. See paper tray troubleshooting printing problems, 28 status lights, 38 transferring pictures, 37 turning printer dock on/off, 3 U upgrading software & firmware, 40, 45 URLs, Kodak web sites, 40 USB
cable, 19 connector (from device), i connector (to computer), ii, 19 V VCCI compliance, 49 W warranty, 46 Windows OS installing software on, 17