KODAK Photo Printer 6800/6805

User Guide for:

KODAK Photo Printer 6800 (6 in.) KODAK Photo Printer 6805 (5 in.)
Eastman Kodak Company 343 State Street Rochester, New York 14650 Eastman Kodak Company, 2003 Kodak is a trademark of Eastman Kodak Company. ENERGY STAR is a U.S. registered trademark. 6B8601

Product Overview

1. Filter openings 2. Cover release 3. Upper cover 4. Operator panel 5. Print exit slot (print catcher not shown) 6. Trim tray
7. USB connector 8. Paper door 9. Data plate (location may vary) 10. Serial number/Bar code label (location may vary) 11. Power connector 12. Power switch
Internal View with Ribbon Installed
1. Thermal head 2. Stripper plate
Internal View with Ribbon Removed
3. Cleaning roller, rear 4. Platen roller 5. Cleaning roller, front

Operator Panel

Kodak Photo Printer 6800
Menu Power Ready Error Enter Paper Rewind/Clear Paper Advance

Table of Contents

1 Setting Up the Printer Package Contents.....1-1 Before You Begin.....1-2 Recommended Air Flow Clearances....1-2 Removing the Packing Material....1-3 Installing the Trim Tray....1-4 Installing the Print Catcher....1-4 Loading the Ribbon.....1-5 Connecting the Cables....1-7 Connecting the Power Cable....1-7 Connecting the USB Cable....1-8 Turning On the Printer.....1-8 Loading the Paper.....1-8 Making a Test Print.....1-10 Online User Guide.....1-Installing the Printer Driver Software Installing the Printer Driver....2-1 Customizing Printer Properties....2-2 Customizing Printing Preferences....2-2 Uninstalling the Printer and Printer Driver...2-Calibrating the Printer Installing the Calibration Software....3-1 Using the Calibration Utility....3-1 Uninstalling the Calibration Software....3-8 Resolving Calibration Error Messages....3-Operating the Printer Making Prints.....4-1 Handling and Storing Prints.....4-1 Understanding the Operator Panel Lights....4-1 Using Setup Mode to Review Printer Settings....4-2 Accessing the Printer Settings....4-2
5 Maintaining the Printer Cleaning the Cabinet.....5-1 Performing Routine Maintenance....5-1 Cleaning the Thermal Head and Stripper Plate...5-2 Cleaning the Platen Roller....5-3 Cleaning the Cleaning Rollers....5-Troubleshooting Resolving Potential Problems.....6-1 Resolving Operator Panel Error Messages....6-2 Clearing a Paper Jam.....6-3 Method 1.....6-3 Method 2.....6-3 Recovering from a Power Interruption....6-4 Appendix A: Important Printer Information System Requirements.....A-1 Printer Specifications.....A-1 Printer Supplies.....A-2 Paper and Ribbon....A-2 Handling and Storing the Paper and Ribbon....A-3 Thermal Printer Cleaning Kit.....A-3 Print Catcher.....A-3 Packing and Transporting the Printer....A-3 ENERGY STAR Partner....A-3 Getting Help......A-4 Appendix B: Safety and Regulatory Information Important Safety Information.....B-1 Safety Labels......B-2 Regulatory and Safety Compliance....B-3 Safety.....B-3 Radio Frequency Interference....B-3 Noise Emission....B-4 Disposal......B-4 Index

Setting Up the Printer

The KODAK Photo Printer 6800/6805 is packaged with the following items:

Package Contents

A161_0005BC
1. Printer 2. KODAK Thermal Printer Cleaning Kit 3. Trim Tray (not installed) 4. Print Catcher (not installed) 5. (4) 6800 Power Cable (1 US, 1 Europe, 1 Australia, 1 China)
(2) 6805 Power Cable (1 Japan, 1 China) 6. USB Cable
7. (2) Paper Flange 8. (2) Paper Flange Spacer - 6805 only 9. User Guide and software CD, not pictured (in some countries, the User
Guide is provided on the CD, not in printed form)

Before You Begin

IMPORTANT:
Your KODAK Photo Printer comes with several power cables. Be sure to select the correct power cable required for your country.
For the KODAK Photo Printer 6800, have the following items available before you begin your printer setup: KODAK Photo Print Kit 6800/4R or KODAK Photo Print Kit 6800/6R which contains the correct paper and ribbon for your printer. See Appendix A for details on the Photo Print Kit (sold separately). KODAK Photo Printer 6800/6R Print Catcher to catch 6 x 8 in. finished prints. See Appendix A for details on the Print Catcher (sold separately). USB cable (included). For the KODAK Photo Printer 6805, have the following items available before you begin your printer setup: KODAK Photo Print Kit 6805/3R which contains the correct paper and ribbon for your printer. See Appendix A for details on the Photo Print Kit (sold separately). USB cable (included). IMPORTANT: The printer weighs 56 pounds (25 kg) and is heavier at the front than at the back. Use caution when lifting or moving the printer.

Recommended Air Flow Clearances
If you plan to set up the printer in a restricted space, such as in a cabinet, refer to the following illustration for the recommended air flow clearances for this type of setup.

10 mm 50 mm

Removing the Packing Material
The printer is packaged with protective inserts that prevent damage during shipping. Remove these inserts before using the printer. Keep the packing inserts; reinstall them when repacking and transporting the printer.
1. Remove the tape that holds the upper cover closed.
2. Slide the cover release toward you, then open the upper cover carefully. IMPORTANT:
Cover does not open beyond a 90 angle.
3. Remove the packing material.

Installing the Trim Tray

The trim tray collects paper trimmings that are generated when the printer cuts the prints. Slide the trim tray into the printer as shown.

CAUTION:

There are sharp cutter blades inside the printer. Do not insert hands or objects.

Trim tray

To keep your prints dust-free and to prevent paper jams, empty the trim tray each time you change the paper.
Installing the Print Catcher

Print exit slot

The print catcher that comes with the printer collects 3.5 x 5 in. and 4 x 6 in. finished prints as they exit the printer. The KODAK Photo Printer 6800/6R Print Catcher is available for purchase with the KODAK Photo Printer 6800 to catch 6 x 8 in. finished prints. See Appendix A for details on the Print Catcher (sold separately). Hang the print catcher from the print exit slot as shown.

Print catcher

Loading the Ribbon
For the KODAK Photo Printer 6800, have a KODAK Photo Print Kit 6800/4R or KODAK Photo Print Kit 6800/6R available. These kits contain the correct size ribbon for your printer. See Appendix A for details on the Photo Print Kits (sold separately). For the KODAK Photo Printer 6805, have a KODAK Photo Print Kit 6805/3R available. This kit contains the correct size ribbon for your printer. See Appendix A for details on the Photo Print Kits (sold separately). To load the ribbon into the printer:

1. Slide the cover release toward you, then open the upper cover carefully. IMPORTANT:
The thermal head becomes extremely hot during normal operation. Do not touch it.
2. If you are replacing a ribbon, remove the used ribbon from the printer.
NOTE: Images remain on the ribbon after printing. If you need to maintain confidentiality, dispose of the used ribbon appropriately.
3. Insert your fingers into the holes in the plastic on the end of the ribbon.
Remove the plastic cover from the ribbon. IMPORTANT: Do not remove the wrapper from the ribbon at this time.

Wrapper

Supply spool
4. Push the bar code end of the supply spool into the spool holder on the

Bar code

right. 5. Place the left side of the supply spool into the spool holder on the left. 6. Rotate the thumb wheel until the lugs on the spool holder lock into the notches on the supply spool.

Lugs Thumb wheel

Notches
7. Remove the label and wrapper from the ribbon.

Take-up spool

8. Push the right side of the take-up spool into the spool holder on the
right. 9. Place the left side of the take-up spool into the spool holder on the left. 10. Adjust the take-up spool until the lugs on the spool holder lock into the notches on take-up spool.
11. If there is any slack in the ribbon, remove it by turning the supply spool. IMPORTANT:
Slack in the ribbon can cause a paper jam when making prints.
12. Close the upper cover by pressing on the center of the cover until it clicks

in place.

Connecting the Cables
If you plan to install the printer driver software on your computer, you will need to install the software before you connect the cables. See Chapter 2 , Installing the Printer Driver Software.
You must install the printer driver software before connecting the cables or your printer will not work.
Connecting the Power You may have received more than one power cable with your printer. Be sure to use the correct power cable required for your country. Cable
1. Check that the power switch is turned off ( CAUTION:

The power outlet must be grounded. An ungrounded outlet can cause fire, electric shock, or harmful interference to nearby electrical devices.
2. Connect the power cable to the power connector on the back of the
printer and to a grounded power outlet.

Connecting the USB Cable

Use the included USB cable.
1. Check that the power switch is turned off (
). 2. Connect the USB cable to the USB connector on the back of the printer and to the USB connector on the computer.

Turning On the Printer

1. Press the power switch to on ( | ).
On the operator panel, the orange Power light and the green Ready light illuminate, and the Ready message appears when the printer is initialized. 2. To turn off the printer, press the power switch to off ( ).

Loading the Paper

For the KODAK Photo Printer 6800, have a KODAK Photo Print Kit 6800/4R or KODAK Photo Print Kit 6800/6R available. These kits contain the correct size paper for your printer. See Appendix A for details on the Photo Print Kits (sold separately). For the KODAK Photo Printer 6805, have a KODAK Photo Print Kit 6805/3R available. This kit contains the correct size paper for your printer. See Appendix A for details on the Photo Print Kit (sold separately).
To load the paper into the printer:
1. Remove the plastic cover from the new paper roll. IMPORTANT:
Do not remove the label from the paper roll until you have successfully loaded the paper into the printer.

Green paper flange

2. Attach the paper flanges to each end of the paper roll. a. Line up the lugs on the green paper flange with the notches on the left
side of the paper roll. b. Place the green paper flange on the left side of the paper roll. c. Place the black paper flange on the right side of the paper roll. NOTE: Be sure to match up the lugs on the green paper flange with the notches on the left side of the paper roll. If you do not attach the Black paper flange paper flange properly, the paper roll will not fit into the printer.
3. For the KODAK Photo Printer 6805, attach the paper spacers before
attaching the paper flanges.

Paper spacers

4. Open the paper door.
The operator panel displays the Cover Open message.
5. Set the paper roll into the printer according to the green and black

arrows on the label.

6. Remove the label from the paper roll.

Alignment marks

7. Align the edge of the paper with the alignment marks on the paper guide.
Use the 5" alignment marks when loading paper into the KODAK Photo Printer 6805. Use the 6" alignment marks when loading paper into the KODAK Photo Printer 6800.

Paper guide

Pinch roller
8. Insert the paper under the pinch roller. IMPORTANT:
Do not advance the paper past the red line or you may cause the paper to jam.
9. Advance the paper to the red line by turning the paper feeding knob.
Red line Paper feeding knob
10. Carefully close the paper door.
The operator panel displays the Paper Empty message.
11. Press Paper Advance to load the paper into the printer.
Paper Menu Advance Power Ready Error Enter Paper Rewind/Clear
The printer advances the paper, then cuts and discharges about 24 in. (607 mm) of blank paper. This reduces the possibility of fingerprints or other damage to the prints. It does not decrease the x 6 in. print capacity of the paper roll (see page A-2). The operator panel displays the Ready message.

Making a Test Print

Make a test print to check that the printer is installed and set up correctly. 1
1. Press Menu once until Test Print Mode appears. 2. Press Enter to start printing the test print. 3. Press Clear to return to Ready after the test print is printed.
For more information on using the operator panel in Setup mode, see Using Setup Mode to Review Printer Settings on page 4-2.

Online User Guide

This User Guide and the Quick etup Guide are also provided on the CD that came with your printer. The Guides are in PDF format; ADOBE ACROBAT Reader (also provided) is required to read them. Follow the on-screen directions to install ADOBE ACROBAT Reader if you do not already have it installed on your system.
Installing the Printer Driver Software
A printer driver is software that allows the operating software to access the printer features. The WINDOWS 2000/XP 6800/6805 printer driver requires the following:
Operating System Service Pack Minimum Memory
WINDOWS 2000 Professional WINDOWS 2000 Server WINDOWS 2000 Advanced Server WINDOWS XP Home WINDOWS XP Professional

SP3 SP3 SP3 SP1 SP1

128 MB 256 MB 256 MB 128 MB 128 MB
The printer driver also requires a functional USB port to communicate with the printer. The printer is compliant with the USB 2.0 protocol. NOTE: If your equipment only supports the USB 1.1 protocol, data communication to the printer will be slower and may affect print times.
Installing the Printer Driver
NOTE: You must have Administrator privileges to install the printer driver.
1. Insert the CD that came with the printer into your CD-ROM drive.
The CD Browser launches automatically. If it does not, double-click the Kodak680x.exe file in the CD root directory. 2. Select your language. 3. Click Software. NOTE: Before installing the software, read the Printer Driver Readme file for important information and updates about the software.

4. Click Printer Driver to start the installer. 5. Follow the on-screen instructions to install the printer driver.
Customizing Printer Properties
The Printer Properties dialog box displays options for setting the printer properties.
1. For your operating system, do the following: WINDOWS 2000 WINDOWS XP
Select Start > Settings > Printers. Select Start >Printers and Faxes.
2. Right-click the printer icon for your printer model. 3. Select Properties. 4. Adjust the printer settings appropriately for your printer.
Customizing Printing Preferences
The Printing Preferences dialog box displays options for setting how your printer will print. 1. For your operating system, do the following:

WINDOWS 2000 WINDOWS XP

2. Right-click the printer icon for your printer model. 3. Select Printing Preferences. 4. On the Layout tab, click Advanced.
The Advanced Options dialog box appears. 5. Adjust the printing preferences appropriately for your printer.
Uninstalling the Printer and Printer Driver
NOTE: You must have Administrator privileges to uninstall the printer and printer driver.
Select Start > Settings > Printers. Double-click Printers. The Printers dialog box appears.
3. Click Yes to delete the printer.
Select Start > Printers and Faxes. Double-click Printers. The Printers and Faxes dialog box appears.
2. Right-click the printer you want to remove and select Delete.
4. Select File > Server Properties. 5. Select Drivers. 6. Highlight the printer driver you want to remove and click Remove. 7. Click Yes to delete the printer driver. 8. Click Close.

Calibrating the Printer

The KODAK Calibration Utility (calibration utility) allows the KODAK Photo Printer to produce the best possible color response. Printer calibration adjusts the response of the printer so that a specific data input value yields a specific color density output. When a printer is properly calibrated, it generates the correct density for each given data value. Your KODAK Photo Printer is shipped with default factory calibration values. You should be able to set up your printer and begin printing right away without having to first calibrate the printer. However, if you are dissatisfied with your prints, follow the steps in this chapter to calibrate your printer.
Installing the Calibration Software
The CD Browser launches automatically. If it does not, double-click the Kodak680x.exe file in the CD root directory. 2. Select your language. 3. Click Software. NOTE: Before installing the software, read the Calibration Software Readme file for important information and updates about the software.

The printer is initializing.
The printer is not ready for calibration.
Paper error. Paper empty. Ribbon empty. Paper jam. Cover open. Printer error: 2500. Please call for service.
The paper is empty or not loaded. The paper is empty. The ribbon is empty. The paper is stuck in the printer or paper path. The upper cover is open or not latched. _
Wait a few minutes until the operator panel Ready light is illuminated. If this message continues to occur, power the printer off and then on. Load the paper. See Loading the Paper on page 1-8. Reload the paper. See Loading the Paper on page 1-8. Reload the ribbon. See Loading the Ribbon on page 1-5. Clear the paper jam. See Clearing a Paper Jam on page 6-3. Close the upper cover by pressing on the center of the cover until it clicks. Contact your KODAK representative for service. Have available: the error code number the printer model number and serial number (listed on the printer data plate) Contact your KODAK representative for service. Have available: the error code number the printer model number and serial number (listed on the printer data plate) Check the USB cable connection. Replace the USB cable. Try using a different USB port on the computer. If the printer is connected through a USB hub, try connecting directly to the computer.
Printer error 2504. Please call for service.

USB communication error.

The software is unable to communicate with the printer.

Operating the Printer

You make prints using photo printing software applications. For application-specific printing information, see the users guide or online Help for the software application.

Making Prints

Handling and Storing Prints
For best results: Make sure hands are clean and free of food, oil, and grease. Store prints in a cool, dry environment free of chemical contamination. Store prints at temperatures below 72 F (25 C) for extended periods. Store prints at a relative humidity between 30% and 50%. Avoid exposure to high-intensity light sources, particularly fluorescent light and sunlight, which are rich in ultraviolet radiation. Avoid exposure to vinyl items (those made of polyvinyl chloride, PVC) or any plastic that contains plasticizer. If you use transparent sleeves, make sure that they are not PVC-based.

Resolving Operator Panel Error Messages
Refer to the following table to resolve errors reported on the operator panel. If the problem persists, contact your KODAK representative for service.
Paper Empty Ribbon Empty Incorrect Paper/ Incorrect Ribbon Paper Jam XX Cover Open Paper Guide Error Data Error Mecha Error XX Control Error XX TempSensErr XX
The paper is empty or is not loaded. The ribbon is empty or is not loaded. The loaded paper and ribbon are not the same width. The paper is stuck in the printer or paper path. The upper cover is open or not latched. The paper and paper guide sizes are different. There is a communication problem between the printer and host computer. The printer has a mechanical problem.
Load the paper. See Loading the Paper on page 1-8. Load the ribbon. See Loading the Ribbon on page 1-5. Make sure the paper and ribbon are the same width. Load the correct paper or ribbon. See page 1-8 or page 1-5. See Clearing a Paper Jam on page 6-3. Close the cover by pressing on the center of the cover until it clicks. Load the correct paper. See Loading the Paper on page 1-8. Check the host computer.
Contact your KODAK representative for service. Have available: The printer has a system control problem. the error code number (XX) The printer has a problem with the the printer model number and serial temperature sensor. number (listed on the printer data plate)

Clearing a Paper Jam

If the Paper Jam message is displayed on the operator panel, there are two methods that you can use to try to clear the paper jam.

Method 1

1. Press Paper Rewind until the Paper Empty message appears.
2. Press Paper Advance to re-load the paper into the printer.
The printer advances the paper, then cuts and discharges about 20 in. (508 mm) of blank paper. This reduces the possibility of fingerprints or other damage to the prints. It does not decrease the x 6 in. print capacity of the paper roll (see page A-2). The operator panel displays the Ready message. If the Paper Jam message is still displayed on the operator panel: 1. Turn off the printer and open the upper cover.

2. Remove the ribbon from the printer. CAUTION:

Method 2

Prevent damage to the printer. Do not pull abruptly on the paper.
3. Slowly and carefully pull the jammed paper out of the printer.
4. Cut off any damaged or printed areas of the paper.
NOTE: Do not damage or mark any of the rollers.
5. Close the upper cover and turn on the printer. 6. Press Paper Rewind to rewind the paper into the printer.
If the Paper Jam message still appears on the operator panel, press Paper Rewind again. 7. Open the upper cover and reload the ribbon. See Loading the Ribbon on page 1-5. 8. Close the upper cover. 9. Reload the paper. See Loading the Paper on page 1-8. NOTE: If the Paper Jam message is still displayed on the operator panel, and you are at the end of a paper roll, it is possible that a segment of paper is too short to automatically exit the printer. Remove the front cleaning roller (see Cleaning the Cleaning Rollers on page 5-3) and remove the segment of paper.
Recovering from a Power Interruption
If the printer loses power while printing, the printer stops with the thermal head positioned against the platen roller. The platen roller could be deformed and damaged if the thermal head is left in this position. If a power outage occurs: 1. Open the upper cover immediately to release the pressure on the platen roller. Leave the cover open until power is restored. 2. When power is restored, restart the printer by following the procedure for Clearing a Paper Jam on page 6-3. 3. Submit your print job again.
Appendix A: Important Printer Information

System Requirements

Personal computer with MICROSOFT WINDOWS 2000 or MICROSOFT WINDOWS XP operating system Minimum 1.0 GHz PENTIUM III microprocessor Minimum 128 MB of RAM; 2 GB of available hard disk space NOTE: You may need up to 256 MB of RAM and 10 GB of hard disk space for acceptable performance with some imaging applications on high performance, multi-tasking operating systems. USB High Speed (2.0) compliant host device

Printer Specifications

Dimensions Width Depth Height 11.4 in. (290 mm) 19.6 in. (496 mm) 13.6 in. (346 mm) 56 lbs (25 kG) 50 to 95 F (+10 to +35 C) 20 to 80%
Weight (without ribbon and paper) Operating Temperature environment Relative Humidity
Power Voltage/Frequency (auto 90V to 132V / 48 Hz to 62 Hz detection of the following ranges) 180V to 264V / 48 Hz to 62 Hz Power consumption Print size 320 watts maximum KODAK Photo Printer 6800: 4 x 6 in. (102 x 152 mm) 6 x 8 in. (152 x 203 mm) with border 6 x 8 in. (152 x 203 mm) borderless KODAK Photo Printer 6805: 3.5 x 5 in. (90 x 127 mm)

ENERGY STAR Partner

As an ENERGY STAR Partner, Eastman Kodak Company has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

Getting Help

Help with your printer is available from the following sources: Troubleshooting section in this manual, Chapter 6. Your KODAK Customer Service representative.
Appendix B: Safety and Regulatory Information
Important Safety Information
Use of controls or adjustments, or performance of procedures other than those specified in this manual may result in injury and/or damage to the printer. The power outlet should be easily accessible and installed near the printer. Position the power cable so that it cannot be pulled on or tripped over. Never allow the power cable to contact hot surfaces. The power outlet must be grounded. An ungrounded outlet can cause fire, electric shock, or harmful interference to nearby electrical devices. Use only the power cable provided with the printer. Do not operate the printer with a damaged power cable. Always unplug the power cable from the printer before cleaning or when the printer is not in use. If the printer has been dropped or damaged, be sure a qualified service person examines the printer before you use it. Do not block the filter openings on the printer cabinet. Do not expose the printer to moisture or water. Do not allow any foreign objects or liquids to fall or spill inside the printer. Fire or electric shock could result. The thermal head becomes extremely hot during normal operation. Do not touch it. Alcohol pads are used to clean the thermal head and other internal printer components. In the United States for health, safety, and environment information, call 585-722-5151. Customers outside the U.S. can contact their local KODAK Customer Service representative.
Safety and Regulatory Information

Safety Labels

Please observe the important safety warnings that are posted on the printer.

P/N 2J5451 1641132182

CAUTION HOT SURFACE To avoid burns, use caution when closing the cover.
CAUTION HOT SURFACE The thermal head becomes extremely hot during normal operation. Do not touch it.

P/N 2J5452 1641132183

CAUTION SHARP OBJECTS The metal edges of the printer may be sharp.

P/N 2J5439 1641132233

CAUTION SHARP CUTTER BLADE There are sharp cutter blades inside the printer. Do not insert hands or objects. This label is posted behind the trim tray.
Regulatory and Safety Compliance

Safety

Complies with UL 60950 Third EditionCAN/CSA C22.2 No. 60950 Third Edition EN 60950:2000 IEC 60950 Fourth Edition NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. Operation of this equipment in a residential area is likely to cause interference in which case the user will be required to correct the interference at his or her own expense. Requirements of the EMC directive 89/336/EEC were met through compliance with the following: EN 55022: 94 (class B) with Amendments A1:95 and A2:97 EN 55024: 98 ITE Immunity includes the following: EN61000-4-2 ESD EN61000-4-3 Radiated rf immunity EN61000-4-4 EFT EN61000-4-5 Surge EN61000-4-6 Conducted rf immunity EN61000-4-11 Voltage dips and interruptions EN 61000-3-2 Harmonics EN 61000--3-3 Flicker "Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment." This is a Class A product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.
Radio Frequency Interference

Noise Emission Disposal

The operator-position noise emission value is 58 dB(A).* * Average value specified in accordance to JIS Z8731 This product contains a small amount of lead in the solder on the circuit boards. Disposal of this material may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities. In the USA, contact the Electronics Industry Alliance at http://www.eiae.org.

A air flow clearances, 1-2 C cabinet, cleaning, 5-1 cables connecting, 1-7 power, 1-7 USB, 1-8 calibrating the printer, 3-1 calibration errors, 3-8 calibration software installing, 3-1 uninstalling, 3-8 calibration utility, 3-1 checking paper status, 4-2 ribbon status, 4-2 cleaning cabinet, 5-1 cleaning rollers, 5-3 platen roller, 5-3 stripper plate, 5-2 thermal head, 5-2 cleaning rollers, cleaning, 5-3 clearing paper jam, 6-3 connecting cables, 1-7 contents, package, 1-1 D disposal, B-4 E error messages calibration, 3-8 operator panel, 6-2 H handling paper, A-3 prints, 4-1 ribbon, A-3 help with your printer, A-4 humidity paper and ribbon specifications, A-2 printer specifications, A-1 I installing calibration software, 3-1 paper, 1-8 print catcher, 1-4 printer driver, 2-1 ribbon, 1-5 trim tray, 1-4 K KODAK Photo Print Kit, A-2 KODAK Photo Printer Print Catcher, A-3 KODAK Thermal Printer Cleaning Kit, A-3 L labels, safety, B-2 loading paper, 1-8 ribbon, 1-5 M maintenance cabinet, 5-1 cleaning rollers, 5-3 KODAK Thermal Printer Cleaning Kit, A-3 platen roller, 5-3 stripper plate, 5-2 thermal head, 5-2
N noise emission spec, B-4 O online user guide, 1-11 operator panel error messages, 6-2 lights, 4-1 making a test print, 4-2 Paper Advance, loading paper, 1-10 printer settings, 4-2 Ready message, 4-2 setup mode, 4-2 ordering supplies, A-2 output tray See print catcher, 1-4 P package contents, 1-1 packing material, removing, 1-3 packing the printer, A-3 paper handling and storing, A-3 loading, 1-8 reordering, A-2 specifications, A-2 Paper Advance, operator panel, 1-10 paper jam, clearing, 6-3 paper status, checking, 4-2 platen roller, cleaning, 5-3 power cable, 1-7 interruption, recovering, 6-4 requirements, A-1 turning on, 1-8 print catcher, 1-4 reordering, A-3 printer calibrating, 3-1 operating, 4-1 preferences, customizing, 2-2 properties, customizing, 2-2 setting up, 1-1 settings, 4-2 specifications, A-1 printer disposal, B-4 printer driver installing, 2-1 uninstalling, 2-2
printer problems, resolving, 6-1 printing making prints, 4-1 test print, 4-2 prints handling and storing, 4-1 making, 4-1 problems, 6-1 R radio frequency compliance, B-3 Ready message, operator panel, 4-2 recycling, B-4 reordering supplies, A-2 ribbon handling and storing, A-3 loading, 1-5 reordering, A-2 specifications, A-2 ribbon status, checking, 4-2 S safety compliance, B-3 tips, B-1 warning labels, B-2 setting up the printer, 1-1 setup mode, 4-2 software installing calibration software, 3-1 printer driver, 2-1 uninstalling calibration software, 3-8 printer driver, 2-2 specifications paper and ribbon, A-2 printer, A-1 storing prints, 4-1 ribbon, A-3 stripper plate, cleaning, 5-2 supplies, printer, A-2 support, A-4 switch, power, 1-8 system requirements, A-1

T temperature paper and ribbon specifications, A-2 printer specifications, A-1 test print, making, 1-10 thermal head, cleaning, 5-2 transporting the printer, A-3 trim tray, 1-4 troubleshooting clearing paper jam, 6-3 error messages, operator panel, 6-2 potential problems, 6-1 power interruption, 6-4 U uninstalling calibration software, 3-8 printer driver, 2-2 unpacking, 1-3 USB cable, connecting, 1-8