ex.) Zoom 4 Set Function

4003P315EA
Shows graphic representations of the settings currently made for Orig. Copy and Finishing. * When you want to check for more details of the set functions, press the Mode Check key. p.2-20

4003P139CA

ex.) Orig. Copy : Single-Sided Double-Sided Finishing : Sort-and-Staple 5 Sub-message Display Shows what is being done with the currently reserved job. * To check for the settings made for the currently reserved job, press the Job List key. p.3-70

ex.) Now Printing

Operating the Touch Panel
You need only to lightly touch the key shown on the Touch Panel to select or activate the function represented by the key. NOTE NEVER press the Touch Panel hard or use a hard or pointed object to press it, as a damaged panel could result.
6. Turning ON and OFF and Initial Mode

Turning ON and OFF

Turning the Machine ON: Press the Power Switch to the Chapter 2 Turning the Machine OFF: Press the Power Switch to the position. (ON) position.
NOTE The Auto Shut OFF function will automatically shut down the machine a given period of time after the last activity. p. 2-19

4002O108AB

When Machine is Turned ON
When the Power Switch is turned ON, the Start key lights up orange. In about a few seconds, the message Now warming-up. Ready to scan. appears and the Start key lights up green. The machine thereafter enables its auto copy start function. p. 2-19 At this time, however, pressing the Start key does not start a copy cycle. The machine needs a warm-up period of about 4 minutes (at a room temperature of 23C).

Initial Mode

When the Power Switch is turned ON, the Basic screen appears on the Touch Panel. The settings on this screen are called the initial mode, serving as the reference for all panel settings to be later made. No. of copies selected: 1 Finishing : Non-Sort Zoom : 1.000 Paper : Auto Paper Density : Auto (Text) Orig. Copy : Single-Sided

4003P001CA

Paper Suitable for Use as Originals
Types of Originals: Sheets (Plain paper) 1-sided Original (weighing 13-1/4 to 29-1/4 lb) 2-sided Original (weighing 16 to 24 lb) Mixed Original Detection mode (weighing 16 to 24 lb) Original size : 1-Sided Original, 2-Sided Original Mode : 1117 L to 5-1/28-1/2 L Mixed Original Detection mode : 1117 L to Letter
Paper Not Suitable for Use as Originals
Typing paper, paraffin paper, heat-sensitive paper, and other thin paper Thick paper Originals greater than 1117 L or smaller than 5-1/28-1/2 L Transparencies, translucent paper Wrinkled, dog-eared, curled, or torn originals Clipped or stapled originals Carbon-backed originals * For any of these types of originals, place the original manually on the Original Glass to make a copy. p.3-6

Loading the Originals

Slide the Document Guide Plate to the size of the originals.

4002O127AC

Load a neat stack of originals face up on the Document Handling Tray.
NOTES The maximum number of originals that can be loaded: Up to 100. The machine is capable of scanning a document consisting of 100 or more pages at one time. p.3-67 Make sure that the top level of the original stack does not exceed the w marking. Make sure that the Document Guide Plate is in touch with the edges of the original stack. If it's not pressed snugly against the original stack, skewed feeding could result. You can make copies automatically from originals of assorted sizes loaded in the Electronic Document Handler. You can also make copies of the same size from originals of different sizes. p.3-66 Load the original in the direction shown below when loading it in the Electronic Document Handler.

4002O128AC

4002O129AC
If you need to load your original in a direction different from these examples, set Original Direction (the direction of the original) on the Touch Panel. p.3-38

Using the Original Glass

Different methods are used to place the original depending on its type. Use the procedure appropriate for your original. If you are using an Electronic Document Handler, p. 3-4 If you place your original directly on the Original Glass, make sure that it is placed in the direction illustrated below.

Open the Single Feed Tray and slide the Guide Plate to the size of the original.
The original is automatically taken up and the copy cycle is started.

4002O131AC

Insert the original face down into the tray.

4002O132AD

NOTES Be sure to place one original at a time. Be sure to correct any fold or curl in the original beforehand.

3. Selecting the Paper

Paper Size
Touch [Basics] and [Paper] to show a screen that allows you to select the paper.

Auto Paper

In the Auto Paper mode, the machine automatically selects the paper of the optimum size according to the size of the original being used and zoom ratio selected for use.

Manual Selection

The paper size can be set manually according to your need.
Touch [Paper] on the Basic screen and then touch [Auto Paper].

4003P305EA 4003P305EA

NOTES The original sizes that can be detected in the Auto Paper mode are 1117L, Legal L, Letter L, Letter C, 5-1/28-1/2 L, B4L, and B5C. If the Electronic Document Handler is used, A4L and A4C can also be detected. When making copies from originals other than these, select the paper size. When using wrinkled, dog-eared, or curled originals, select the paper size. When the Electronic Document Handler is used, the machine determines the paper size when the first original is taken up and fed in and uses that paper size for the subsequent originals (except in the Mixed Original Detection mode). Useful Tips This mode is efficient when you want to make copies on paper of the same size as your originals automatically. Priority settings for the initial mode can be made using Users Choice. p.5-13
Touch the desired paper size key.

4003P306EA

1 1st Drawer 4 4th Drawer Multi Bypass 2 2nd Drawer 3 3rd Drawer L Large Capacity Cassette *Some keys are not available on the Touch Panel depending on the type of options mounted on the machine.
Touch [Paper] on the Basic screen, and the Touch Panel shows which drawer holds which paper size.

Using Zoom Up/Down Keys

Touching [w] or [v] changes the zoom ratio in 0.001 increments. You can hold down the key to change the ratio quickly.
Touch [Minimal] and set the zoom ratio.
Hold down [w] or [v] until the desired zoom ratio is reached.
Useful Tips A value of 0.930 has been factoryprogrammed in [Minimal], but that ratio can be changed as necessary. 3-18 It comes in handy for making a copy, without losing any portion of the original image, from an original which has an image area covering its entire surface.

4003P319EA

Useful Tips To save time, first select the fixed zoom ratio nearest to the target ratio before using [w] or [v]. The zoom ratio can be set in the range 0.250 to 4.000 when the copy is made through the Original Glass and 0.250 to 2.000 when the Electronic Document Handler is used.

4003P318EA

Using the 10-Key Pad
You may use the 10-Key Pad to directly enter the zoom ratio. <Same ratio for X and Y> Touch [Custom Zoom].
<Using the X / Y Zoom> Touch [Custom Zoom].

4003P320EA

Enter the zoom ratio from the 10-Key Pad.

Touch [X/Y Zoom].

1139O4870A
Useful Tips Example: 1.300 Press 1, 3, 0, and 0, in that order, from the 10Key Pad.

4003P321EA

Touch [X] or [Y] to enter the desired zoom ratio from the 10-Key Pad.

1149O160BA

To correct a ratio, press the Clear key and then enter the correct one again. The zoom ratio can be set in the range 0.250 to 4.000 when the copy is made through the Original Glass and 0.250 to 2.000 when the Electronic Document Handler is used.

4003P322EA

Useful Tips To correct a ratio, press the Clear key and then enter the correct one again. The zoom ratio can be set in the range 0.250 to 4.000 when the copy is made through the Original Glass and 0.250 to 2.000 when the Electronic Document Handler is used.
Calling up a Ratio from Memory
You can store some of the most frequently used zoom ratios in memory and recall them later as necessary. <Same ratio for X and Y> <Using the X / Y Zoom>

Touch [Custom Zoom].

From among the two ratios previously stored in memory and [Minimal], select the desired one.

4003P323EA

From among the three ratios previously stored in memory, select the desired one.
Useful Tip It's a good idea for you to store frequently used zoom ratios in memory. p.3-18

4003P324EA

Storing a Ratio in Memory
<Same ratio for X and Y>

4002O058AA

Hole Punch
Touch [Hole Punch]. NOTES <For United States and Canada Users> Finisher FN-5/Finisher FN-105 The number of holes to be punched can be selected from among two and three. Mailbin Finisher The number of holes to be punched is three, but two is optionally available. <Except United States and Canada Users> The number of holes to be punched is two.

4002O285EA

<Only when the Finisher FN-5 is mounted> This function allows you to fold copies. Touch [Fold].

4002O060AA

You have a choice of folding options, either Crease, Half-Fold, or Z-fold. p.3-28
Useful Tip The machine has been factory-set to automatically switch between Sort and Non-Sort depending on the number of originals and the number of copies to be made when the Electronic Document Handler is used. It has also been set to automatically select Non-Sort in the initial mode. These default settings can still be changed by using Users Choice. p.5-14
<Only when the Finisher FN-5/ Finisher FN-105/ Mailbin Finisher is mounted> Holes are punched in the copy sets or stacks for filing. It can be combined with Non-Sort, Sort, Group or Staple.
Selecting the Finishing Function

Sort/Group

Touch the desired finishing function key.
Useful Tips Shift Sorting The sorted copy sets are stacked in the same direction, but in a sawtooth manner by shifting the tray to the front or rear for each set.

4002O061AB 4003P330EA

NOTES When either the Finisher FN-105, Finisher FN106, or Mailbin Finisher is mounted, copies are fed out in a sawtooth manner in Sort or Group mode. When the Finisher FN-5 is mounted, or when neither a Finisher nor a Mailbin Finisher is mounted, copies are fed out in a crisscross manner in Sort or Group mode. Crisscross sorting is possible only when all of the following conditions are met: Crisscross Mode of Users Choice is turned ON. The machine is loaded with paper of the same size, but in two different directions. OHP, Card/Vellum, or a small size is not set if the Multi Bypass Tray is used. p.3-11 Mixed Original Detection is turned OFF. None of the Staple, Hole Punch, Folding, Page Insertion, and Cover functions are set. Useful Tips If Crisscross is set to ON in Users Choice, sorted copy sets will be stacked in a crisscross manner, one set stacked lengthwise on top of another set stacked crosswise. Otherwise, if Crisscross is set to OFF, the sorted copy sets will be stacked together in the same direction. The default setting for Crisscross is ON. This can be changed to OFF in Users Choice. p.5-14
Crisscross Sorting The sorted copy sets are stacked in a crisscross manner, one set stacked lengthwise on top of another set stacked crosswise.

Precautions for Copying through Original Glass
If an original is placed directly on the Original Glass in 2-Sided, 2in1, 4in1, or Booklet, Separate Scan is automatically set. p.3-67 Separate Scan is not set, however, if the following settings have been made: Book - Spread - 2-Sided Copy - Page Arrangement - Standard.
Handy Feature Available from Initial Mode Setting
The initial setting for the original copy type is 1-Sided 1-Sided. If this setting is changed to 1Sided 2-Sided or 2-Sided 2-Sided, the Basic screen shows a [1-Sided 1-Sided] key.
Touch this key to simply set the 1-Sided Sided mode.

4003P067CA

7. Selecting the Density

Image Density

When you touch [Density] on the Touch Panel, a screen appears that allows you to set the exposure level for the image density. Density offers a choice of [Text], [Text/Photo], or [Photo]. Select one according to your needs.
Useful Tips Touching [Auto] automatically selects [Text]. The machine has been factory-set to automatically select the Auto Exposure mode. Users Choice can be used to change this default setting to the Manual Exposure mode. p.5-14
Text emphasizes outlines to produce clear-cut text as it appears on the copy. <Auto Exposure> When in the Auto Exposure mode, the machine automatically adjusts the exposure level for the optimum copy image density. <Manual Exposure> In the Manual Exposure mode, you can vary the exposure level in nine steps.
Touch [Text]. Touch [Auto]. [Auto] is highlighted, indicating that the machine is set into the Auto Exposure mode.
Touch [Text]. Touch [Lighter] or [Darker] as necessary.

4003P068CA

Useful Tips To make the image darker, touch [Darker]. To make the image lighter, touch [Lighter].
Useful Tip The exposure level in the Auto Exposure mode can be made either Darker or Lighter by using Users Choice. p.5-14

Text/Photo

Select Text/Photo when you make copies from an original that contains both text and photos.
The machine can make a faithful reproduction of an original having a halftone image such as photos.
Touch [Text/Photo]. [Text/Photo] is highlighted, indicating that the machine is set into the Text/Photo mode.

Touch [Photo]. [Photo] is highlighted, indicating that the machine is set into the Photo mode.

4003P069CA 4003P071CA

Touch [Lighter] or [Darker] as necessary.

4003P070CA 4003P072CA

NOTE In the Text/Photo mode, the machine defies automatic adjustments of the exposure level. Be sure to manually adjust the exposure level as necessary before making the copy. Useful Tips To make the image darker, touch [Darker]. To make the image lighter, touch [Lighter].
NOTE In the Photo mode, the machine defies automatic adjustments of the exposure level. Be sure to manually adjust the exposure level as necessary before making the copy. Useful Tips To make the image darker, touch [Darker]. To make the image lighter, touch [Lighter].

8. Auxiliary Functions

When [Auxiliary] on the Touch Panel is touched, the Auxiliary function menu screen appears allowing you to set the various auxiliary functions.

4003P001CA 4003P004CA

The Cover mode lets you make a front cover or a front and back cover for a copy set by copying the first page or the first and last page of an original set on different paper from the normal paper, such as color paper. There are six different Cover functions available. Select the appropriate one according to your need.

Functions

Front Cover: Copied Back Cover: None Front Cover: Blank Back Cover: None

4002O032AA

4002O033AA
Front Cover: Copied Back Cover: Blank
Front Cover: Blank Back Cover: Blank

4002O034AA

4002O035AA
Front Cover: Copied Back Cover: Copied
Front Cover: Blank Back Cover: Copied

4002O036AA

4002O037AA

Using the Cover Mode

Load the originals.
Select the key for the back cover.

4002O149AC

Touch [Cover].

4002O146AB

4003P073CA
Useful Tip You can use the Multi Bypass Tray as the paper source of the cover paper. The tray, however, accepts the following paper size only: X, 7-1/4 to 17 and Y, 5-1/2 to 11-3/4.
Select the key for the front cover.
Touch the key for Cover Paper.

4003P374EA

4003P376EA
NOTE If you place your original directly on the Original Glass, you need to set Separate Scan.p.3-67

4003P375EA

Load the paper for the cover (e.g., color paper) into the drawer.
Select the paper source in which paper for cover has been loaded in step 5.

4003P377EA

Touch [Enter]. Touch [Enter].

4003P378EA

Page Insertion
<Only when the Electronic Document Handler is mounted> Page Insertion allows you to insert a special sheet of paper (e.g., color paper) into the copy set. Two different functions are available. Select the appropriate one according to your need. NOTE Automatic Detection cannot be performed when the Mixed Original Detection mode is set.

Selecting Mixed Original Detection
Chapter 3 Use the Mixed Original Detection function to make copies automatically from originals of assorted sizes loaded in the Electronic Document Handler.
Load the stack of originals so that the rear edge of each original is pressed against the rear Document Guide Plate. Then, slide the front Document Guide Plate against the front edges of the originals with the greatest width.

4002O296EB

4002O148AD
NOTES <When the Finisher FN-105/Finisher FN-106/ Mailbin Finisher is mounted> The width of the originals loaded must be the same if Mixed Orig. Detection, Auto Paper, and Staple are combined together to make copies. ex.: For originals consisting of 1117L, Letter C, and Letter L, copies can be made if Letter L is aligned with Letter C.
Touch [Mixed Orig. Detection].

4003P117CA

Useful Tip Users Choice allows you to default to Mixed Original Detection. p.5-13

4002O147AD

<When the Finisher FN-5 is mounted> Copies cannot be made if Mixed Orig. Detection, Auto Paper, and Staple are combined together. It becomes, however, possible to make copies when Z-Fold is further combined with these three functions and if originals are loaded so that all have the same width.

Selecting Separate Scan

Separate Scan permits the machine to scan a large set of originals in several parts. The Electronic Document Handler can be loaded with up to 100 pages of a document. If you, however, divide a document consisting of more than 100 pages so that each part contains less than 100 pages, it can still be scanned as one set by the machine. Example: A 150-page document
Load the next set of originals and press the Start key. Repeat step 3 according to the number of pages of the document.
Useful Tip The number of originals that can be scanned and stored in memory at one time is about 100 sheets of standard Letter paper. The addition of an optional 32MB Memory expands the maximum storage capacity to about 260 sheets and the addition of an optional Hard Disk Drive Kit expands it to about 2000 sheets.

100 sheets

50 sheets

150 sheets

4002O049AB

Touch [Separate Scan].

When all pages of the document have been scanned, touch [Finish] and press the Start key.

4003P118CA 4003P119CA

Load the first set of original(s) and press the Start key.
The machine starts a copy cycle.

NOTE If the original is placed directly on the Original Glass to make a copy, do that in ascending order of page.
10. Selecting the Job Functions

Memory Recall

Touching [Memory Recall] on the Touch Panel after a copy cycle has been completed will allow you to make a copy using the previous image data and copying mode without having to reload the original.

Setting Memory Recall

Touch [Memory Recall].
Useful Tips After you have made copies from a confidential document, it is recommended that you press the Panel Reset key to erase the data. To change the number of copies to be made, press the Clear key and set the new number. The paper size and paper direction cannot be changed.

4003P120CA

Press the Start key, and the machine starts the print cycle.

4003P121CA

NOTES Memory Recall available from Users Choice must be turned ON to use this function. p.5-13 This function cannot be used in the Interrupt mode. The preceding image data and copy settings are cleared to disable Memory Recall when any of the following operations is performed. The machine is turned OFF. The machine scans a new original or the Start key is pressed. The Access key or Interrupt key is pressed, or [Reserve] is touched. The Clear key or Panel Reset key is pressed while the machine remains idle.

Reserve

<Only when the Hard Disk Drive Kit is mounted> *As the machine completes scanning for a regular copy job, it is capable of scanning for another job which is held in reserve. When the machine completes the copy cycle for the first job, it automatically starts the copy cycle for the reserved job. By job, we mean a sequence of operation from original loading to the end of the copy cycle. NOTE Reserve is disabled if the machine is equipped with the optional Plug-In Counter.

Reserving a Job

Touch [Reserve] on the Touch Panel.

4003P122CA

Load the originals and make the necessary settings.

4003P123CA

Press the Start key, and the machine starts scanning the originals and the job is reserved.
NOTES The number of copying jobs that can be stored is a maximum of 5 or about 2000 sheets of Letter standard original. Jobs are copied in order of reservation. For a job to be reserved, Manual Bypass cannot be selected.

Job List

The Job List key on the control panel offers several convenient functions that are nice to use.
Mode Check allows you to check what settings have been made for a job.

Change

Change allows you to change the settings made for a job.
Touch [Mode Check] and then touch the job no. key whose settings are to be checked.
Touch [Change] and then touch the job no. key whose settings are to be changed.

2. Using 1-Sided Originals
Making 1-Sided Copies from 1-Sided Originals
Intended Type of Copy Loading the Originals Copy Finishing Functions Margin File Margin Select Position

SingleSided

Corner Staple
Corner Staple Chapter 4 Typical Function Combinations Hole Punch
2-Point Staple Hole Punch

1-Sided

Single[2in1]

Single[4in1]

Making 2-Sided Copies from 1-Sided Originals

Double[2in1]

Corner Staple Hole Punch 2-Point Staple Hole Punch Chapter 4 Typical Function Combinations

Double[4in1]

3. Using 2-Sided Originals with Filing Margin along Left Edges
Making 1-Sided Copies from 2-Sided Originals with Filing Margin along Left Edges
Corner Staple Hole Punch Chapter 4 Typical Function Combinations
Making 2-Sided Copies from 2-Sided Originals with Filing Margin along Left Edges
4. Using 2-Sided Originals with Filing Margin along Top Edges
Making 1-Sided Copies from 2-Sided Originals with Filing Margin along Top Edges
Making 2-Sided Copies from 2-Sided Originals with Filing Margin along Top Edges
2-Point Staple Hole Punch 2-Point Staple
5. Using Large-Size Originals
Precautions When Making Copies on 1117L or LegalL
When making copies on 1117L or LegalL, make sure of the correct direction of the original, position of 2-point staple, and position of hole-punch. If you load your original as shown below, select Original. P.3-38 as part of your steps to specify the Direction of

4002O269AA

1155O882EA
When making copies on 1117L or LegalL, 2-point staple or hole punch cannot be made in any of the following positions.

6. Stapled Position

Precautions for Stapling
The position, at which the copy set or stack is stapled together, differs according to the size and direction of the paper. Study the following illustrations to select the paper. <When the Finisher FN-5 is mounted> Paper sizes: LetterC

4002O352AA

Paper sizes: LetterL

4002O270AA

Original sizes: LetterC Chapter 4

4002O353AA

Paper sizes: LetterC

4002O354AA

4002O271AA

Original sizes: LetterL

4002O355AA
Paper sizes: 1117L, LegalL

4002O364AA

Original sizes: 1117L, LegalL

4002O357AA

4002O351AB 4002O356AA
Original sizes: 1117L, LegalL NOTE Specify the direction of the original if the original is to be placed in any direction other than those shown above.p.3-38

4003P149CB

4003P143CA

Calling up a Job

Press the Job Recall key.

4002O283CA

Touch the job number key in which the desired job has been stored.

4003P150CA

4003P151CA
If the job recalled is not what you want, touch [Menu]. Then, the Job Recall screen reappears.
Check the settings made and then touch [Exit]. The machine is now set up for these settings and the Basic screen reappears.

2. Image Memory Input

Image Memory Input
<Only when the Hard Disk Drive Kit is mounted> Up to five different, frequently used characters and marks can be stored in memory so you can use them later whenever necessary. NOTE Image Memory Input cannot be set for a job for which the Auto Copy Start setting has been made.

Storing an Image

Touch [Input], then touch the desired image number key, in which you want to store the image.

4003P453EC

NOTE An image number key not marked with indicates that an image has already been stored under that number. If you store a new image in that number key, the old image is erased.
Touch [Image Memory Input].
Select the size of the original, from which to store an image.

4003P152CA

4003P454EB
<Auto size detection> Touch [AutoDetect] on the screen given in step 5.
If you want to erase the image on the left, top, or along the frame of the original, touch [Erase].

4003P458EB 4003P455EB

<Size input> Touch [Custom Size] on the screen given in step 5.
You have a choice of the following three types of erase: Left Edge Erase Stores the image after erasing the left edge of the original.

Orig. Input Image

4003P456EB
Touch [w] or [v] to set the whole number for X and touch [X]. The underline moves to the right. Then touch [w] or [v] to set the fractional number and touch [X]. Now the value for X has been fixed.
Stores the image after erasing the top edge of the original.
Frame Erase Stores the image after erasing the four edges of the original.

4003P457EB 1149O055AA

Select the desired erase position.

As illustrated on the Touch Panel, place the original directly on the Original Glass.

4003P459EB

4002O152AC
Using [w] or [v], set the desired erase width.
Select an image orientation the same as that of the original.

4003P460EB

4003P162CB
Useful Tip The erase width can range between 1/4 to 3/4 variable in 1/16 increments.

4003P461EB

Checking the Programmed Image
Touch [Check], then touch the number key to be checked.

4003P463EC

Select the type of paper on which to print the programmed image.

4003P464EB

Press the Start key and the programmed image is printed on the copy.
Useful Tip Programmed images may be checked by using the screen for calling up a preprogrammed image. Checking the Preprogrammed Image p.3-64
Deleting a Programmed Image
Touch [Delete], then touch the number key to be deleted.

4003P465EC

3. Meter Count and Toner Replenisher

Meter Count

Touching [Meter Count] allows you to check the total count of each of the following seven counters recorded since the installation of the machine.

Total Counter

Shows the total number of prints made since the installation of the machine.

Account Total Counter

Shows the total number of prints made by the active accounts.

Size Counter

Shows the number of prints made on paper of a preset size. (The size will be set by your Technical Representative.)

Printer Total Counter

Shows the number of prints produced by the machine configured as a printer.

2-Sided Total Counter

Shows the number of 2-sided prints made.

Printer Size Counter

Shows the number of prints produced by the machine configured as a printer on paper of a size preset for Size Counter. (This counter counts the number of prints made on paper of the same size as that set for the Size Counter.) Chapter 5 Using the Utility Mode

2-Sided Size Counter

Shows the number of 2-sided prints made on paper of a preset size (the same size as that set for the Size Counter.)

Capacity of Bins

Punching
<For United States and Canada Users>
Paper Size Non-Sort Sort Group Crisscross Sort LetterC LetterL 1117L, LegalL 5-1/28-1/2 Letter 1117L to Letter LetterC 1117L, LegalL, LetterL 1117L, LetterL 1117L, LetterL 1117L 1117L 1117L 1117L 1117L (Z-Folded) + LetterC *Z-Folded: 5 sheets/set Unfolded*: 25 sheets/set Top Offset Tray 100 sheets 100 sheets 100 sheets 100 sheets 100 sheets 10 sheets 10 sheets 30 sheets 100 sheets
Bottom Offset Tray Corner Staple 2-Point Staple 2500 sheets (no staple) 2000 sheets (no staple) 1500 sheets (no staple) 1000 sheets (no staple) 100 sets or 1000 sheets 200 sets or 2000 sheets 200 sets or 1000 sheets 100 sets or 1000 sheets 100 sets or 100 sheets 50 sheets (no staple) 100 sheets 50 sheets (no staple) 100 sheets Z-Folded: 100 sheets Z-Folded + Unfolded*: 1000 sheets (no staple) Z-Folded: 100 sheets Z-Folded: 100 sheets Z-Folded + Unfolded*: Z-Folded + Unfolded*: 1000 sheets 2000 sheets
#Sheets/ Copy Set 2 to 50 sheets 2 to 50 sheets 2 to 50 sheets 2 to 50 sheets 2 to 15 sheets 2 to 10 sheets 2 to 10 sheets -

Corner

Staple Sort Group

Side Center Staple

Non-Sort, Sort, Group
Crease Folding HalfFold ZFold

2 to 30 sheets

Paper Size Non-Sort Sort Group Crisscross Sort LetterC LetterL 1117L, LegalL 5-1/28-1/2 Letter 1117L to Letter LetterC 1117L, LegalL, LetterL 1117L to LetterL 1117L to LetterL 1117L to LegalL 1117L to LegalL 1117L 1117L 1117L (Z-Folded) + LetterC *Z-Folded: 5 sheets/set Unfolded*: 25 sheets/set Top Offset Tray 100 sheets 100 sheets 100 sheets 100 sheets 100 sheets 10 sheets 10 sheets 30 sheets 100 sheets
Bottom Offset Tray Corner Staple 2-Point Staple 2500 sheets (no staple) 2000 sheets (no staple) 1500 sheets (no staple) 1000 sheets (no staple) 100 sets or 1000 sheets 200 sets or 2000 sheets 200 sets or 1000 sheets 100 sets or 1000 sheets 100 sets or 100 sheets 50 sheets (no staple) 100 sheets 50 sheets (no staple) 100 sheets Z-Folded: 100 sheets Z-Folded + Unfolded*: 1000 sheets (no staple) Z-Folded: 100 sheets Z-Folded: 100 sheets Z-Folded + Unfolded*: Z-Folded + Unfolded*: 2000 sheets 1000 sheets
* Only 1117L size paper can be Z-folded. Therefore, if a stack of mixed-size originals (1117L and other sizes) is copied in Mixed Original Detection mode, the copy set will contain a mix of Z-folded and unfolded copies.

P R O D U C T

T E C H N I C A L

S U P P O R T

D I V I S I O N
Product Information Guide Di450/Di550
Information contained in any literature published by Minolta Corporation concerning the expected life or yields of parts, supplies or other products mean time between failures or any other service costs are and shall be deemed to be estimates only. Results in actual field experience may vary substantially from such estimates. In no event shall such estimates be deemed or represented to be in any way a representation or warranty of Minolta Corporation.

7668-4002-25

Copier Specifications

Di450/Di550

Di450 Di550
Platen Type Photoconductor Copying System Developing System Fusing System Resolution Types of Original
Console Copier/Printer Stationary OPC Electrostatic Dry Powdered Image Transfer to Plain Paper Micro-Toning System Lamp-Heated Roller 600 dpi Sheets, books and other three-dimensional objects Maximum original size: 11 X 17 Lengthwise Maximum original weight: 6-1/2 lb Plain paper (16 lb to 24 lb), recycled paper Exclusive paper : Thick paper (24-1/4 lb to 41-3/4 lb), translucent paper, OHP transparencies *Exclusive paper can only be used for the Multi Bypass Tray. 1st Drawer/2nd Drawer: 11 X 17L to 5-1/2 X 8-1/2L Intelligent Multi Bypass Tray: Crosswise: 4 to 11-3/4 Lengthwise: 5-3/4 to 17 1st Drawer/2nd Drawer: 550 sheets (20 lb) Intelligent Multi Bypass Tray : 50 sheets (20 lb), 20 sheets (recycled paper or exclusive paper) 240 seconds or less LetterC = 4 seconds or less (in full size mode using 1st Drawer) Full size (x1.000) Full size (x1.000) 11 X 17L: X 17L: 31 Legal L: 32 Legal L: 37 Letter L: 38 Letter L: 45 Letter C: 45 Letter C: 55 Fixed ratios, Full size: 1:10.005 Reduction ratios: 0.500, 0.647, 0.733, 0.785, 0.930 Enlargement ratios: 1.214, 1.294, 1.545, 2.000 Variable ratios: From 0.250 to 4.000 in 0.001 increments Up to 999 copies (count-down system) Auto Exposure Mode, Manual Exposure Mode, Text Exposure Mode, Text/Photo Exposure Mode and Photo Mode 1-sided copy in the full size mode Leading Edge 1/8Trailing Edge,1/8 Rear Edge 1/8 AC120V, 50/60Hz 1.43kW Width : 26-1/4 Depth : 29-1/4 Height : 40-3/lb 10 to 32 C with fluctuation of less than 10 C per hour 15to 85% RH with fluctuation of less than 10% RH per hour 3,000 lux or less O 1 or less

Kinds of Paper

Copy Paper Size

Paper Feeding System

Warm-up Time First Copy Copy Speed (Approx. copies/min)

Zoom Ratios

Multiple Copies Exposure Control Lost Image Power Requirements Power Consumption Dimensions Weight
ENVIRONMENTAL CONDITIONS TEMPERATURE HUMIDITY AMBIENT LUMINATION LEVELNESS RELIABILITY SUGGESTED MONTHLY VOLUME MCBF COPIER ONLY MCBF SYSTEM ANTICIPATED MONTHLY VOLUME
160,000 91,000 66,000 10,500
200,000 112,000 81,000 16,000
ACCESSORIES ELECTRONIC DOCUMENT HANDLER FINISHER LARGE CAPACITY CASSETTE DUPLEX CABINET BASE 2 DRAWER CABINET BASE WITH DUPLEX TANDEM DRAW BASE WITH DUPLEX HARD DISK DRIVE KIT 32MB MEMORY SUPPLIES WITH SPECIFICATIONS STARTER ITEM NUMBER CONTENTS OF ONE UNIT UNIT YIELD UNITS PER CARTON COMPATIBILITY WITH OTHER COPIERS TONER ITEM NUMBER REPLENISHING METHOD CONTENTS OF ONE UNIT UNIT YIELD UNITS PER CASE COMPATIBILITY WITH OTHER COPIERS PHOTOCONDUCTOR ITEM NUMBER TYPE YIELD COMPATIBILITY WITH OTHER COPIERS DISPOSAL STAPLE CARTRIDGES ITEM NUMBER QUANTITY PER UNIT ITEM NUMBER QUANTITY PER UNIT ITEM NUMBER QUANTITY PER UNIT ITEM NUMBER QUANTITY PER UNIT CONSUMABLES WITH SPECIFICATIONS UPPER FUSING ROLLER LOWER FUSING ROLLER CLEANING BLADE WEB ROLLER
EDH-3 FN-105 FN-106 FN-503 C-306 C-306L PF-7D PF-SHEETS x 2 PF-115 2,7000 SHEETS HDD-1 KIT M32-2
8936-912 600g 240,NONE 8936-902 Bottle 1,100g 33,None 4002-0291-01 Organic 240,000 Di-450 Household waste FN-5

8936-912 600g 300,NONE

4002-0291-01 Organic 300,000 Di-550 Household waste
4448-101 5,000 FN-105 4623-361 15,000 FN-106 4623-371 15,000 FN-503 4448-121 15,000 ITEM NUMBER / YIELD 4002-5701-01 4002-5702-01 1136-0901-01 4002-5732-01 480,000 480,000 240,000 480,000 ITEM NUMBER / YIELD 4002-5701-01 4002-5702-01 1136-0901-01 4002-5732-01 500,000 500,000 300,000 500,000

Accessory Specification

2 Way Paper Feed Cabinet PF-208 Kinds of Paper Paper Size Plain paper (16 lb to 24 lb), recycled paper Duplex Unit: 11 X 17L to 5-1/2 X 8-1/2L 3rd Drawer: 11 X 17L to 5-1/2 X 8-1/2L 4th Drawer: 11 X 17L to LetterL Capacity Power Source Dimensions Weight 3rd Drawer: 550 sheets (20 lb) 4th Drawer: 550 sheets (20 lb) Supplied from copier Width : 26-1/4 100-1/4 lb Depth : 28-3/4 Height : 15-1/4

Large Capacity Cabinet PF-115 Kinds of Paper Paper Size Capacity Power Source Dimensions Weight Plain paper (16 lb to 24 lb), recycled paper Duplex Unit: 11 X 17L to 5-1/2 X 8-1/2L 3rd Drawer: Letter C 3rd Drawer: 2,700 sheets (20 lb) Supplied from copier Width : 26-1/lb Depth : 28-3/4 Height : 15-1/4
Duplexing Paper Feed Cabinet PF-7D Kinds of Paper Paper Size Power Source Dimensions Weight Plain paper (16 lb to 24 lb), recycled paper Duplex Unit: 11X 17L to 5-1/2 X 8-1/2L Supplied from copier Width : 26-1/4 82-3/4 lb Depth : 28-3/4 Height : 15-1/4
Electronic Document Handler EDH-3 Document Feeding System Standard Mode:1-sided original, 2-sided original Mixed Original Detection Mode:1-sided Mixed Original Detection 2-sided Mixed Original Detection Single Feeding Mode:1-sided original Kinds of Original Plain paper 1-sided original: 13-1/4 lb to 29-1/4 lb 2-sided original, Mixed Original Detection: 16 lb to 24 lb Single Feeding: 9-1/4 lb to 41-3/4 lb Original Size Capacity of Document Handling Tray Power Source Power Consumption Dimensions Weight Supplied from copier 72W or less Width : 26 28-3/4 lb Depth : 22-3/4 Height : 5-1/2 1-sided, 2-sided original, Single Feeding: 11 X 17L to 5-1/2 X 8-1/2L Mixed Original Detection: 11X 17L to Letter Up to 100 sheets (20 lb)
Finisher FN-105 Types of Trays Modes Kinds of Paper Top Offset Tray, Bottom Offset Tray Non-Sort Mode, Sort Mode, Group Mode, Staple Mode, Hole Punch Mode Top Offset Tray Non-Sort Mode Plain paper (16 lb to 24 lb), recycled paper Exclusive paper Thick paper (24-1/4 lb to 41-3/4 lb), translucent paper, OHP transparencies Hole Punch Mode Plain paper (16 lb to 24 lb), recycled paper Bottom Offset Tray Sort Mode, Group Mode Plain paper (16 lb to 41-3/4 lb), recycled paper Staple Mode, Punch Mode Plain paper (16 lb to 24 lb), recycled paper Paper Size Capacity Top Offset Tray: 11 X 17L to 5-1/2 X 8-1/2 Bottom Offset Tray: 11 X 17L to Letter Top Offset Tray Plain paper (20 lb), recycled paper :Max. paper size 11 X 17L to 5-1/2 X 8-1/2, 250 sheets Exclusive paper Thick paper, translucent paper, OHP transparencies = 20 sheets each Bottom Offset Tray Plain paper (20 lb), recycled paper : Letter L or smaller, 3,000 sheets Larger than Legal L, 1,500 sheets Stapling Punching Power Source Power Consumption Dimensions Weight Accessories Acceptable paper size: 11 X 17L to Letter Acceptable number of copies: 2 to 50 sheets Acceptable paper size: 11 X 17L to Letter Punch Hole: 2-Hole or 3-Hole Supplied from copier 63W or less Width : 21-1/4 Depth : 24-3/4 Height : 38-1/2 Finisher : 86-1/2 lb Staple Cartridge, 5,000 staples/cartridge 2 pieces

Finisher FN-106 Types of Trays Modes Kinds of Paper Top Offset Tray, Bottom Offset Tray Non-Sort Mode, Sort Mode, Group Mode, Staple Mode Top Offset Tray Non-Sort Mode Plain paper (16 lb to 24 lb), recycled paper Exclusive paper Thick paper (24-1/4 lb to 41-3/4 lb), translucent paper, OHP transparencies Bottom Offset Tray Sort Mode, Group Mode Plain paper (16 lb to 41-3/4 lb), recycled paper Staple Mode Plain paper (16 lb to 21-1/4 lb), recycled paper Paper Size Capacity Top Offset Tray: 11 X 17L to 5-1/2 X 8-1/2 Bottom Offset Tray: 11 X 17L to Letter Top Offset Tray Plain paper (20 lb), recycled paper : Max. paper size 11 X 17L to 5-1/2 X 8-1/2, 250 sheets Exclusive paper : Thick paper, translucent paper, OHP transparencies = 20 sheets each Bottom Offset Tray Plain paper (20 lb), recycled paper : Letter L or smaller, 1,000 sheets : Larger than Legal L, 500 sheets Stapling Power Source Power Consumption Dimensions Weight Accessories Acceptable paper size: 11 X 17L to Letter Acceptable number of copies: 2 to 30 sheets Supplied from copier 63W or less Width : 21-1/4 Depth : 24-3/4 Height : 38-1/2 Finisher : 78-1/4 lb Staple Cartridge, 3,000 staples/cartridge 1 piece
Finisher FN-5 Types of Trays Modes Kinds of Paper Top Offset Tray, Bottom Offset Tray Non-Sort Mode, Sort Mode, Group Mode, Staple Mode, Hole Punch Mode and Folding Mode Non-Sort Mode, Sort Mode and Group Mode Plain paper (16 lb to 24 lb), recycled paper Exclusive paper : thick paper, translucent paper, OHP transparencies Staple Mode, Hole Punch Mode and Folding Mode Plain paper (16 lb to 21-1/4 lb), recycled paper Capacity of Bins Plain paper, recycled paper: Refer to the chart below Exclusive paper: OHP transparencies (max. paper size: Letter), thick paper, translucent paper = 10 sheets each Punching Power Source Power Consumption Dimensions Weight Accessories Acceptable Paper size: 11X17L to Letter Punch Hole: 2-Hole or 3-Hole Supplied from copier 96W or less Width: 40-1/2 207-3/4 lb Staple Cartridge, 5,000 staples/cartridge 1 piece
Paper Size Top Offset Tray 100 sheets 100 sheets Bottom Offset Tray Corner Staple 2-Point Staple 2500 sheets (no staple) 2000 sheets (no staple) 1500 sheets (no staple) 1000 sheets (no staple) 100 sets or 1000 sheets 200 sets or 2000 sheets 200 sets or 1000 sheets 100 sets or 1000 sheets 100 sets or 100 sheets #Sheets/ Copy Set 2 to 50 sheets 2 to 50 sheets 2 to 50 sheets 2 to 50 sheets 2 to 15 sheets 2 to 10 sheets 2 to 10 sheets -

Depth: 26-1/4

Height: 43-3/4
Non-Sort Sort Group Crisscross Sort Corner

LetterC LetterL

11 X 17L, 100 sheets LegalL 5-1/2 X 8-1/sheets Letter 100 sheets 10 sheets 10 sheets 30 sheets
11 X 17L to Letter LetterC Sort Side Group 11 X 17L, Staple LegalL, LetterL Center 11 X 17L, LetterL Staple 11 X 17L, Crease LetterL 11 X 17L Half- Non-Sort, Sort, Group Folding Fold Staple 11 X 17L Non-Sort, Sort, Group 11 X 17L ZFold Staple 11 X 17L 11 X 17L (ZFolded) + LetterC Mixed Z-Folded *Z-Folded: 5 Orig. + sheets/set Detection Unfolded* Unfolded*: 25 sheets/set
50 sheets (no staple) 100 sheets 50 sheets (no staple) 100 sheets 100 sheets Z-Folded: 100 sheets Z-Folded + Unfolded*: 1000 sheets (no staple) Z-Folded: 100 sheets Z-Folded: 100 sheets Z-Folded + Unfolded*: Z-Folded + Unfolded*: 1000 sheets 2000 sheets -

2 to 30 sheets

*Only 1117L size paper can be Z-folded. Therefore, if a stack of mixed-size originals (1117L and other sizes) is copied in Mixed Original Detection mode, the copy set will contain a mix of Z-folded and unfolded copies.
Mailbin Finisher FN-503 Types of Trays Modes Kinds of Paper Top Offset Tray, Bottom Offset Tray, Mailbins (5 bins) Non-Sort Mode, Sort Mode, Group Mode, Staple Mode and Hole Punch Mode Top Offset Tray Non-Sort Mode Plain paper (16 lb to 24 lb), recycled paper Exclusive paper Thick paper (24-1/4 lb to 41-3/4 lb), translucent paper, OHP transparencies Hole Punch Mode Plain paper (16 lb to 24 lb), recycled paper Bottom Offset Tray Staple Mode Plain paper (16 lb to 21-1/4 lb), recycled paper Hole Punch Mode Plain paper (16 lb to 24 lb), recycled paper Mailbin Sort Mode, Group Mode and Hole Punch Mode Plain paper (16 lb to 24 lb), recycled paper Paper Size Top Offset Tray: 11 X 17L to 5-1/2 X 8-1/2 Bottom Offset Tray: 11 X 17L to Letter Mailbin: 11 X 17L to 5-1/2 X 8-1/2L Capacity Top Offset Tray Plain paper (20 lb), recycled paper : Max. paper size 5-1/2 X 8-1/2, 250 sheets Max. paper size 11 X 17L to Letter, 500 sheets Exclusive paper : Thick papers = 20 sheets; translucent paper, OHP transparencies = 10 sheets each Bottom Offset Tray Plain paper (20 lb), recycled paper : LetterL or smaller, 1,000 sheets Larger than LegalL, 500 sheets Mailbin Plain paper (20 lb), recycled paper : 200 sheets/bin Stapling Punching Acceptable paper size: 11 X 17L to Letter Acceptable number of copies: 2 to 50 sheets Acceptable paper size: 11 X 17L to Letter Punch Hole: 3-Hole (2-Hole is an option) Punch Hole: 2-Hole Power Source Power Consumption Dimensions Weight Accessories Supplied from copier 63W or less Width : 26-3/4 Depth : 24-1/2 Height : 38-3/4 Mailbin Finisher : 107 lb Staple Cartridge, 5,000 staples/cartridge 1 piece

Large Capacity Cassette C-306 Kinds of Paper Paper Size Capacity Power Source Power Consumption Dimensions Weight Plain paper (16 lb to 24 lb), recycled paper Letter C, A4C 3,400 sheets (20 lb) Supplied from copier 30W or less Width : 11-1/4 31-1/4 lb Depth : 17-1/2 Height : 19-1/4
Large Capacity Cassette C-306L Kinds of Paper Paper Size Capacity Power Source Power Consumption Dimensions Weight Plain paper (16 lb to 24 lb), recycled paper LegalL, LetterL, Letter C, A4L, A4C 3,400 sheets (20 lb) Supplied from copier 40W or less Width : 17-1/4 36-1/4 lb Depth : 17-1/2 Height : 19-1/4
POWER REQUIREMENTS Voltage: 120VAC/60Hz, 1500W, Single Phase, Grounded Outlet. Outlet: For optimum performance the outlet should be a Dedicated Line. The voltage between HOT and GROUND, should be 120VAC 7V The voltage between NEUTRAL and GROUND, should be no more than 0.5V The voltage between HOT and NEUTRAL, should be 120VAC Voltage Fluctuation: Frequency Fluctuation 10%(Copying performance assured) 15% (Paper feeding performance assured) 50/60 Hz 0.3%
INSTALLATION REQUIREMENTS
A. To ensure safety and utmost performance from your Minolta copier, it should NOT be installed in an area: 1. Which is exposed to direct sunlight 2. Which is in the direct air current of an air conditioner, heater or ventilator. 3. Where it can be splashed with liquids 4. Which has poor ventilation. 5. Which does not have a level stable floor 6. Where the copier may be exposed to sudden fluctuations in temperature or humidity.
7. 8. Where ammonia gas is generated. Which is dirty or where it will receive undue vibration.
PRECAUTIONS FOR USE A. 1. Never place a heavy object on the copier, or subject the copier to shocks. 2. Insert the power plug all the way into the outlet. 3. Do not remove any covers or panels while the copier is making copies. 4. Do not turn OFF the power switch while the copier is making copies 5. Provide proper ventilation when making a large number of copies continuously. 6. Never use flammable sprays near the copier. 7. If the copier becomes inordinately hot or produces abnormal noise turn it OFF and unplug it. 8. Do not bring magnetized objects near the copier. 9. Be sure to turn off the power switch at the end of the work day, or in case of a power failure. 10. Use care not to drop paper clips, staples, or other small pieces of metal into the copier.
B. The Printhead of this copier uses laser diodes that emits laser beams. Use the following precautions when servicing this area of the copier. When service needs to be performed in the laser beam path, such as when working around the printhead or PC drum, be sure to turn the copier OFF. If the job requires that the power cord be left plugged in, observe the following precautions: Take off your watch, rings, and any other reflective object and wear laser protective goggles. At the job site, select a place that is as far as possible away from the users and is enclosed by walls. Do not bring highly reflective tools into the laser beam path. MODEL Di450 EDH-3 FN-105 FN-106 PF-115/208/7D C-306/306L Di450/Di550 Di450/Di550 Di450/Di550 Di450/Di550 Di450/Di550 Di450/Di550 FN-503 Di450/Di550 Di450/Di550 Di450/Di550 ITEM_NUMBER 4003-7995-21 4641-7995-21 4643-7995-21 4644-7995-21 4640-7995-21 4642-7995-21 7661-4002-11 7662-4002-11 7663-4002-11 7666-4002-02 7664-4002-02 7660-4002-20 7665-4612-21 7669-4002-15 7667-4002-04 7667-4002-13 DESCRIPTION PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL GENERAL SERVICE MANUAL FIELD SERVICE MANUAL OPTIONS SERVICE MANUAL QUICK GUIDE OPERATOR MANUAL SERVICE TRAINING CBT PARTS MANUAL MANUAL KIT MAINTENANCE CARD TRUNK INVENTORY DEALER_COST $9.00 $9.00 $9.00 $9.00 $9.00 $9.00 $10.00 $20.00 $20.00 $10.00 $10.00 $50.00 $9.00 $133.00** 4.50.25

** Price subject to change as new manuals are added to the kit. SERVICING JIGS DESCRIPTION Safety Switch Jig Cable Holding Jig DS Roll Jig DS Finger Jig DS Shaft Jig Interlock Jig Jig Scanner Front Jig Scanner Rear Jig Developer
ITEM NUMBER 1067-7901-01 4002-7903-01 1136-7904-01 1136-7905-01 1136-7906-01 1136-0756-01 4002-7904-01 4002-7905-01 4002-7902-01

QUANTITY 1

FOR PRODUCT TECHNICAL SUPPORT, The hours are, 9:AM to 5:PM EST, Monday through Friday, except for Wednesday 10:30AM to 5:PM. We can be reached at 1-800-851-7619.
WARRANTY Please refer to the Warranty and Special Programs section of the Dealer Service Support Manual item number 9005-9005-18.
SERVICE TRAINING Audience Training Method Audience Training Method Audience Classroom Pre-requisite Certification Training Method Di620/520 trained technicians (EP4000/5000 recommended) Hybrid CBT/Web Based testing and certification on-line Di250/350 trained technicians Hybrid CBT/Web Based, testing on line; plus Supplemental Training Module, testing and certification on-line Minolta Analog technicians Hybrid CBT/Web Based, plus Supplemental Training Module; testing on-line. Classroom Training

ASTM DATA SHEET

MODEL: Di450 TEST SYSTEM D450 EDH-3 FN-105 C-304 PF-115 OZONE EMISSIONS: DECIBLE LEVELS: 0.037 ppm 37.2 Stand by 55.5 Copy Process
INPUT: 120V60Hz Monthly volume, N(n*176) Number of copies, n, in test(from Table 1) Copying time, Ct(from Table 2) Idle time, It<60Min-Ct> Number of Jobs, j, in test(from Table 1) Test Results(1-h test) A Plug-in energy B Warm-up plus standby energy C Standby energy D Energy-saver energy E Copying energy plus standby F Energy-saver delay time G Recovery energy plus energy-saver energy Calculations, All Copiers H Warm-up energy,Er<B-C> I Copying energy,Ec<E-C> J Recovery energy,Erc<G-D> K Copying energy per copy,Ec/n Ec/n*0.001 L Energy saver time per hour<It-j*F> M Fraction energy-saver time<L/60> Calculations, Copiers Without Auto Shut-off N Plug-in energy per standerd month<A*489> O Warm-up plus standby energy per standard month<B*20> P Energy-saver time per month<(M*176)+35-(5*F/60)> Q Standby energy per standard month<C*(211-P)> R Energy-saver energy per standerd month<D*P> Calculations, Copiers With Auto Shut-off S Plug-in energy per standerd month<A*519> T Warm-up plus standby energy per standard month<B*22> U Energy-saver time per month<(M*176)+3-(3*F/60)> V Standby energy per standard month<C*(179-U)> W Energy-saver energy per standerd month<D*U> Calculations, All Copiers X Machine energy per standard month-independent at volume Em=(N+O+Q+R)or(S+T+V+W) Y Total energy per month Et=Em+(Ec/n+Erc)N Z Avarage total energy per copy Etavc=(Em+(Ec/n+Erc)N)/N

3.93 Min 56.07 Min 16 Single-sided Copies Watt Hour 0.70 408.90 323.00 214.50 382.00 0.39 Min 242.10 B.T.U. 2.39 1395.17 1102.08 731.87 1303.38 826.05
Duplexed Copies Watt Hour B.T.U.

397.40

1355.93
85.90 293.09 59.00 201.31 27.60 94.17 0.41 1.40 0.00041 0.00140 49.83 Min/Hr 0.83

74.40 0.52 0.00052

253.85 1.76 0.00176
363.30 8995.80 149.15 9642.03 31992.35
1239.58 30693.67 508.89 32898.62 109157.91

50993.49 751236.54 30.05

173989.78 2563219.09 102.53 753910.15 30.16 2572341.45 102.89
MODEL: Di550 TEST SYSTEM Di550 EDH-3 FN-105 C-304 PF-115 OZONE EMISSIONS: DECIBLE LEVELS: 0.037 ppm 37.7 Stand by 56.9 Copy Process
3.44 Min 56.56 Min 16 Single-sided Copies Watt Hour 0.50 405.90 321.10 235.30 386.00 0.39 Min 245.90 B.T.U. 1.71 1384.93 1095.59 802.84 1317.03 839.01

385.60

1315.67
84.80 289.34 64.90 221.44 10.60 36.17 0.45 1.54 0.00045 0.00154 50.32 Min/Hr 0.84

64.50 0.45 0.00045

220.07 1.53 0.00153
259.50 8929.80 150.59 9123.79 35432.85
885.41 30468.48 513.80 31130.37 120896.87

53745.94 330013.30 13.20

183381.13 1126005.37 45.04 329943.85 13.20 1125768.42 45.03
MATERIAL SAFETY DATA SHEET Product Name: MT TONER 502[] Date Printed:5-Sep-2000
1. PRODUCT AND COMPANY IDENTIFICATION
Page:1/8 MSDS No.:PPC-0683 Date Prepared: 17-May-2000 [],denoted with an alphabet.
Product Name: MT TONER 502[] used for: Di450, Di550
Supplier Identification: Minolta Corporation 101 Williams Drive, Ramsey, New Jersey 07446, U.S.A. Telephone: 201-825-4000 Emergency Telephone No. Contact your regional poison control center.
2. COMPOSITION / INFORMATION ON INGREDIENTS

Substance [

Preparation [ X ]
Hazardous Ingredients: Chemical Name: Carbon black (5-10%) CAS No.: 1333-86-4 OSHA Z-Tables(USA): 3.5mg/m3 NTP(USA): Not listed Symbol(EC): Not listed DFG-MAK(EC): Not listed
EEC-No.: 215-609-9 ACGIH-TLV(USA): 3.5mg/m3 IARC Monographs: Group 2B R-Phrase(EC): Not listed Worksafe-TWA(Austl): 3mg/m3
Major Ingredients: [Generic Name] Polyester resin Carbon black Polyolefin wax Magnetite Organic compound +++: Suppliers confidential information
[CAS No.] +++ 1333-86-4 +++ +++ +++
[%] >80 5-10 1- 5 1- 5 1- 5
3. HAZARDS IDENTIFICATION
Page:2/8 MSDS No.:PPC-0683 Date Prepared: 17-May-2000
Most Important Hazards and Effects of the Products For Human Health: This toner is not classified as a human carcinogen. No symptoms expected with intended use. For the Environment: No data are available on the adverse effects of this product on the environment. For Others: None Specific Hazards: Dust explosion (like most finely divided organic powders)

4. FIRST-AID MEASURES

Symptoms of Overexposure: No symptoms expected with intended use. Routes of Entry: Eye contact, inhalation, ingestion Information Inhalation: If symptoms are experienced, remove source of contamination or move victim to fresh air and obtain medical advice. Skin Contact: Flush with gently flowing water (preferably lukewarm) and soap for 15 minutes or until particle is removed. If irritation does occur, obtain medical advice. Eye Contact: Do not allow victim to rub eye(s). Flush with gently flowing water (preferably lukewarm) for 15 minutes or until particle is removed. Have victim look right and left, and, then up and down. If irritation does occur, obtain medical attention. DO NOT attempt to manually remove anything stuck to the eye(s). Ingestion: If irritation or discomfort occurs, obtain medical attention immediately. Note to Physician: None Further Information: None
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media: CO2, water spray, foam and dry chemical Extinguishing Media to Avoid: Full water jet Special Firefighting Procedures: None Fire and Explosion Hazards: If dispersed in air, like most finely divided organic powders, may form an explosive mixture. Protection of Firefighters: Use self-contained breathing apparatus (SCBA).
6. ACCIDENTAL RELEASE MEASURES
Page:3/8 MSDS No.:PPC-0683 Date Prepared: 17-May-2000
Personal Precautions: None Environmental Precautions: None Methods for Cleaning Up: Wipe off with paper or cloth. DO NOT use vacuum cleaner when a large amount is released. It, like most finely divided organic powders, may create a dust explosion. Further Information: None

7. HANDLING AND STORAGE

Handling Technical Measures: Precautions: Safe Handling Advice: Storage Technical Measures: Storage Conditions:
None None Try not to disperse the particles.
None Keep container closed. Store in a cool and dry place. Incompatible Products: None Packing Materials : Bottles or Cartridge designated by Minolta. Further Information: None
8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Engineering Measures Ventilation: None required with intended use. Control Parameters(As total dust) OSHA-PEL(USA): 15mg/m3 ACGIH-TLV(USA): 10mg/m3 DFG-MAK(EC): 6mg/m3 Worksafe-TWA(Austl.): 10mg/m3 Personal Protective Equipment Respiratory protection: None required when used as intended in Minolta equipment. Hand Protection: None required when used as intended in Minolta equipment. Eye protection: None required when used as intended in Minolta equipment. Skin Protection: None required when used as intended in Minolta equipment. Other: For use other than normal customer-operating procedures (such as in bulk toner processing facilities), goggles and respirators may be required. Hygiene Measures: Wash hands after handling. Further Information: None
9. PHYSICAL AND CHEMICAL PROPERTIES
Page:4/8 MSDS No.:PPC-0683 Date Prepared: 17-May-2000
Appearance Physical State: Solid Form: Powder Color: Black Odor: Faint odor Particle Size(m): 5 - 15 Boiling Point: Not applicable Melting Point(C): No data available Softening Point(C): 110 - 125 * Flash Point: Not applicable pH: Not applicable Explosion Properties: No data available Density(g/cm): 1.2 * (bulk density: 0.41 *) Solubility in water: Negligible Flammability: No data available Oxidizing Properties: No data available Ignition Temperature(C): > 400 * Vapor Pressure: Not applicable Partition Coefficient, n-Octanol/Water: Not applicable
10. STABILITY AND REACTIVITY
Stability: Stable [ X ] Unstable [ ] Hazardous Reactions: Dust explosion, like most finely divided organic powders. Conditions to avoid: Electric discharge, throwing into fire. Materials to Avoid: Oxidizing materials. Hazardous Decomposition Products: CO, CO2 Further Information: None
11. TOXICOLOGICAL INFORMATION
Health Effects from Exposure: No symptoms expected with intended use. Toxicological Data Acute Toxicity: Inhalation, LC50(mg/l): >1.93 (Rats,4hour) * (This was the highest attainable concentration.) Ingestion(oral), LD50(mg/kg): >2000 (Rats) * Dermal, LD50(mg/kg): No data available Eye irritation: Slight conjunctival irritation (Rabbits) * Skin irritation: Not an irritant (Rabbits) * Skin sensitizer: No signs (Guinea-pig) * Mutagenicity: Negative * (AMES test) (*= Based on data for other Minolta Products with similar ingredients)
MATERIAL SAFETY DATA SHEET Product Name: MT TONER 502[] Date Printed:5-Sep-2000 Page:5/8 MSDS No.:PPC-0683 Date Prepared: 17-May-2000
Local Effects: see Chronic Toxicity or Long term Toxicity Chronic Toxicity or Long Term Toxicity: Prolonged inhalation of excessive dust may cause lung damage. It is attributed to lung overloading, a generic response to excessive amounts of any dust retained in the lungs for a prolonged interval. Use of this product, as intended, does not result in inhalation of excessive dust. In a study in rats by chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fibrosis was observed in 92% of rats in the high concentration(16mg/m) exposure group, and a minimal to mild degree of fibrosis was noted in 22% of the animals in the middle(4mg/m) exposure group. But no pulmonary change was reported in the lowest(1mg/m) exposure group, the most relevant level to potential human exposures. Carcinogenicity IARC Monographs: Not listed NTP(USA): Not listed OSHA Regulated(USA): Not listed In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible human carcinogen). This evaluation is given to Carbon Black for which there is inadequate human evidence, but sufficient animal evidence. The latter is based upon the development of lung tumors in rats receiving chronic inhalation exposures to free carbon black at levels that induce particle overload of the lung. Studies performed in animal models other than rats have not demonstrated an association between carbon black and lung tumors. Moreover, a two-year cancer bioassay using a typical toner preparation containing carbon black demonstrated no association between toner exposure and tumor development in rats.

12. ECOLOGICAL INFORMATION
Mobility: No data are available on the adverse effects of this material on the environment. Persistence/Degradability: No data are available on the adverse effects of this material on the environment. Bioaccumulation: No data are available on the adverse effects of this material on the environment.
MATERIAL SAFETY DATA SHEET Product Name: MT TONER 502[] Date Printed:5-Sep-2000 Page:6/8 MSDS No.:PPC-0683 Date Prepared: 17-May-2000
Ecotoxicity Behavior in Sewage Works: No data are available on the adverse effects of this material on the environment. Aquatic Toxicity: No data are available on the adverse effects of this material on the environment. Ecological Data(EC) Csb Value(EC): No data are available on the adverse effects of this material on the environment. AOX-Remark(EC): No data are available on the adverse effects of this material on the environment. BsB5 Value(EC): No data are available on the adverse effects of this material on the environment. Significant Components(EC): Not applicable
13. DISPOSAL CONSIDERATION
Appropriate Methods of Disposal Preparation(community provisions): Waste may be disposed or incinerated under conditions which meet all federal, state and local environmental regulations. Contaminated Packaging: Waste may be disposed or incinerated under conditions which meet all federal, state and local environmental regulations.
14. TRANSPORT INFORMATION
Special Precautions: None Information on Code and Classifications According to International Regulations UN Classification: None Land RID(EC): None ADR(EC): None DOT(USA): None Inland Waterways ADNR(Rhine R.): None Sea IMDG: None Air ICAO-TI: None IATA-DGR: None
15. REGULATORY INFORMATION
Page:7/8 MSDS No.:PPC-0683 Date Prepared: 17-May-2000
US Information Information on the label: Not required TSCA(Toxic Substances Control Act): All chemical substances in this product comply with all applicable rules or order under TSCA. SARA(Superfund Amendments and Reauthorization Act) Title III 302 Extreme Hazardous Substance: None 311/312 Hazard Categories: None 313 Reportable Ingredients: None California Proposition 65: This product contains no chemical substances subject to California Proposition 65. EU Information Information on the label (88/379/EEC and 67/548/EEC): Symbol & Indication: Not required R-Phrase: Not required S-Phrase: Not required 76/769/EEC: All chemical substances in this product comply with all applicable rules or order under 76/769/EEC.

16. OTHER INFORMATION

NFPA Hazard Rating: The National Fire Protection Agency(USA): Health: 1 Flammability: 1 Reactivity: 0 HMIS Rating: The National Paint and Coating Association(USA): Health: 1 Flammability: 1 Reactivity: 0 Recommended Uses: Toner for Electrophotographic Equipment Restrictions: Information on this data sheet represents our current data and the best opinion as to the proper use in handling of this product under normal conditions specified in our Users Manual. However, neither Minolta Co.,Ltd. nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we do not guarantee that these are the only hazards which exist.

MATERIAL SAFETY DATA SHEET Product Name: MT TONER 502[] Date Printed:5-Sep-2000 Page:8/8 MSDS No.:PPC-0683 Date Prepared: 17-May-2000
Literature References: ANSI Z400.1-1993 TRGS 220: Sicherheitsdatenblatt fr gefhrliche Stoffe und Zubereitungen ISO 11014-1 Commission Directive 91/155/EEC The Material Safety Data sheet: A Practical Guide to First Aid: Canadian Centre for Occupational Health and Safetys publication HMIS IMPLEMENTATION MANUAL: National Paint & Coatings association IARC(1996): IARC monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans, Vol. 65, Printing Process and Printing Inks, Carbon Black and Some Nitro Compounds, Lyon, pp.149261 H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper, J.C.MacKenzie, P.Morrow, U.Mohr, S.Takenaka, and R.Mermelstein(1991) Pulmonary Response to Toner upon Chronic Inhalation Exposure in Rats. Fundamental and Applied Toxicology 17, pp.280-299.
MATERIAL SAFETY DATA SHEET Product Name: MT Starter 502 Date Printed:5-Sep-2000
Page:1/8 MSDS No.:PPC-1643 Date Prepared: 7-Aug-2000
Product Name: MT Starter 502 used for: Di450, Di550 Supplier Identification: Minolta Corporation 101 Williams Drive, Ramsey, New Jersey 07446, U.S.A. Telephone: 201-825-4000 Emergency Telephone No. Contact your regional poison control center.
Hazardous Ingredients: Chemical Name: Carbon black (< 1%) CAS No.: 1333-86-4 OSHA Z-Tables(USA): 3.5mg/m3 NTP(USA): Not listed Symbol(EC): Not listed DFG-MAK(EC): Not listed
Major Ingredients: [Generic Name] Ferrite Polyester resin Polyester resin Carbon black +++: Suppliers confidential information
[CAS No.] +++ +++ +++ 1333-86-4
[%] 80-90 10-20 1- 5 < 1
Page:2/8 MSDS No.:PPC-1643 Date Prepared: 7-Aug-2000
Most Important Hazards and Effects of the Products For Human Health: This starter is not classified as a human carcinogen. No symptoms expected with intended use. For the Environment: No data are available on the adverse effects of this product on the environment. For Others: None Specific Hazards: Dust explosion (like most finely divided organic powders)
Page:3/8 MSDS No.:PPC-1643 Date Prepared: 7-Aug-2000
Page:4/8 MSDS No.:PPC-1643 Date Prepared: 7-Aug-2000
Appearance Physical State: Solid Form: Powder Color: Black Odor: Faint odor Particle Size(m): 5 - 15(toner) 40 - 75 (carrier) Boiling Point: Not applicable Melting Point(C): No data available Softening Point(C): 110 - 125 * Flash Point: Not applicable pH: Not applicable Explosion Properties: No data available Density(g/cm): 3.2 * (bulk density: 1.3 *) Solubility in water: Negligible Flammability: No data available Oxidizing Properties: No data available Ignition Temperature(C): No data available Vapor Pressure: Not applicable Partition Coefficient, n-Octanol/Water: Not applicable

MATERIAL SAFETY DATA SHEET Page:5/7 Products Name: Photoconductor 502 Date Printed:5-Sep-2000 MSDS No.: DPO-0283 Date Prepared: 7-Aug-2000
Local Effects: No data available Chronic Toxicity or Long Term Toxicity: None Carcinogenicity IARC Monographs: Not listed NTP(USA): Not listed OSHA Regulated(USA): Not listed (*= Based on data for other Minolta Products with similar ingredients)
Mobility: No data are available on the adverse effects of this material on the environment. Persistence/Degradability: No data are available on the adverse effects of this material on the environment. Bioaccumulation: No data are available on the adverse effects of this material on the environment. Ecotoxicity Behavior in Sewage Works: No data are available on the adverse effects of this material on the environment. Aquatic Toxicity: No data are available on the adverse effects of this material on the environment. Ecological Data(EC) Csb Value(EC): No data are available on the adverse effects of this material on the environment. AOX-Remark(EC): No data are available on the adverse effects of this material on the environment. BsB5 Value(EC): No data are available on the adverse effects of this material on the environment. Significant Components(EC): Not applicable
MATERIAL SAFETY DATA SHEET Page:6/7 Products Name: Photoconductor 502 Date Printed:5-Sep-2000
US Information Information on the label: Not required SARA(Superfund Amendments and Reauthorization Act) Title III 302 Extreme Hazardous Substance: None 311/312 Hazard Categories: None 313 Reportable Ingredients: None California Proposition 65: This product contains no chemical substances subject to California Proposition 65. EU Information Information on the label(88/379/EEC and 67/548/EEC): Symbol & Indication: Not required R-Phrase: Not required S-Phrase: Not required
MATERIAL SAFETY DATA SHEET Page:7/7 Products Name: Photoconductor 502 Date Printed:5-Sep-2000
NFPA Hazard Rating: The National Fire Protection Agency(USA): Health: 0 Flammability: 1 Reactivity: 0 HMIS RATING: The National Paint and Coating Association(USA): Health: 0 Flammability: 1 Reactivity: 0 Recommended Uses: Photoconductor for Electrophotographic Equipment Restrictions: Information on this data sheet represents our current data and the best opinion as to the proper use in handling of this product under normal conditions specified in our Users Manual. However, neither Minolta Co., Ltd. nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we do not guarantee that these are the only hazards which exist. Literature References: ANSI Z400.1-1993 TRGS 220: Sicherheitsdatenblatt fr gefhrliche Stoffe und Zubereitungen ISO 11014-1 Commission Directive 91/155/EEC The Material Safety Data sheet: A Practical Guide to First Aid: Canadian Centre for Occupational Health and Safetys publication HMIS IMPLEMENTATION MANUAL: National Paint & Coatings association