FS-1370DN

A4 MONOCHROME DESKTOP PRINTER

HIGH PERFORMANCE

DESKTOP PRINTER
Up to 35 pages per minute in A4 Duplex functionality for double-sided printing as standard Maximum paper capacity of up to 800 sheets PowerPC 440F5 @ 500 MHZ, up to 1,152 MB RAM USB and network connectivity as standard Highly reliable thanks to long-life components Noise level regulation Low printing costs
Fast and efficient, the FS-1370DN has a silent-printing option that makes it the ideal printer for your desktop. Featuring network connectivity, excellent security standards, a large memory and fast printing capabilities, it easily copes with larger print volumes. The clarity of the LCD control panel ensures that it is always easy-to-use. Robust, highly reliable and very economical, the FS-1370DN is a printer you can count on.
Easy -to-understand full-dot LCD display for exceptional clarity.
By printing in half-speed mode you can reduce the noise level and enjoy the benefit of silent operation.
ECOSYS stands for ECOlogy, ECOnomy and SYStem-printing. With their long-life components, ECOSYS devices are designed to maximise durability and minimise the total cost of ownership with regard to maintenance, administration and consumables. The cartridge-free system means that only the toner has to be replaced regularly. The modular design concept allows you to add workflowenhancing functions as required. Integrated system software provides long-term cross-network compatibility. KYOCERAs long-life components cost you and the environment less.
PRESCRIBE IIe With the Kyocera page design and control language PRESCRIBE IIc, even complex graphics, logos and forms (including multipart forms) can be created on any system and stored in the printer. They can be recalled from the printers memory as needed, reducing network congestion. The KM NetViewer KMnet Viewer enables complete monitoring and control of all ECOSYS printers and Kyocera multifunction copiers from any Windows PC. It provides ideal network administration using the industry-standard SNMP protocol. Status Monitor and Command Center The Status Monitor visually portrays the printers condition and gives direct access to the Command Center for the modification of advanced settings not available in the standard driver (e.g. IP settings, sleep mode or disabling the control panel).
General Technology KYOCERA ECOSYS Laser Engine speed Up to 35 pages per minute in A4 Resolution Fine 1,200 dpi Duty cycle Maximum 50,000 pages per month Average 2,800 pages per month Warm-up time Approx. 19 seconds or less from power on Time to first page Approx. 7 seconds or less Dimensions (W x D x H) 375 mm x 393 mm x 267 mm Weight Approx. 12 kg (main unit) Power source 220/240 V, 50/60 Hz Power consumption Printing: 554 W Stand-by: 11 W Power-Saving (ECOpower): 5.5 W Noise (ISO 7779 / ISO 9296) Printing in full-speed mode: 55 dB(A) Printing in half-speed mode: 49 dB(A) Stand-by: 30 dB(A) Safety standards GS, TV, CE This unit is manufactured according to ISO 9001 quality standard and ISO 14001 environmental standard. Paper handling All paper capacities quoted are based on a paper thickness of max. 0.11 mm. Please use paper recommended by KYOCERA under normal environmental conditions.
Input capacity 50-sheet multi-purpose tray; 60220 g/m2; A4, A5, A6, B5, Letter, Legal, Custom (70 x 148 215,9 x 356 mm) 250-sheet universal paper cassette, 60-120 g/m2; A4, A5, A6, B5, Letter, Legal, Custom (105 x 148 mm 215.9 x 297 mm) Max. input capacity incl. options: 800 sheets A4 Duplex functionality Duplex as standard supports 60105 g/m2 Output capacity 250 sheets face-down Controller CPU PowerPC 440F5 @ 500 MHz Memory 128 MB RAM + ECOmemory + 1,024 MB in 1 DDR SDRAM DIMM slot Standard interface USB 2.0 (Hi-Speed), 10BASE-T/100BASE-TX, KUIO/W interface slot, USB Host Interface dedicated for USB Flash Controller language PRESCRIBE IIe Emulations PCL6/PCL5e incl. PJL, KPDL 3 (PostScript 3 compatible) with automatic emulation sensing (AES), Line Printer, IBM Proprinter X24E, Epson LQ-850, Diablo 630, slot for optional internal print server, PDF Direct Print, XPS Operating systems All current Windows operating systems, Mac OS X Version 10.2 or higher, UNIX, LINUX as well as other operating systems on request Fonts/Barcodes 80 outline fonts accessible in all emulations, 1 bitmap font, 45 types of one-dimensional barcodes plus two-dimensional barcode PDF-417, Downloadable fonts: KYOCERA, PCL + TrueType format, Type 1 + 3 format

Consumables TK-170 Toner-Kit Microfine toner for 7,200 pages A4 in accordance with ISO/IEC 19752 Capacity of starter toner is 2,300 pages A4 in accordance with ISO/IEC 19752 Options PF-100 Paper feeder (max. 2 units) Max. 250 sheets; 60120 g/m2; A4, A5, B5, Letter, Legal, Custom (148 x 210 mm 215.9 x 297 mm) CB-130 Cabinet Desk with storage capacity Memory upgrade 1 SDRAM DIMM slot (128, 256, 512 MB, 1 GB) CompactFlash*card 1 slot (up to 4 GB) for printing forms, fonts, logos, macro storage Optional interface PS159: Wireless LAN (802.11b/g) PS1109 Gigabit Ethernet: 10BaseT / 100BaseTX / 1000BaseT (RJ-45) PS129 Fibre Optic: 100BaseSX (SC) PS1129 Gigabit Fibre Optic: 1000BaseSX (SC) Model variations FS-1370DN/KL3 FS-1370DN incl. warranty extension KYOlife 3 years Maintenance MK-170 Maintenance-kit: 100,000 pages Warranty 2-year warranty as standard. KYOCERA guarantees the drum and developer for 3 years or maximum 100,000 pages (whichever occurs sooner), pro-vided each printer is used and cleaned in accordance with the service instructions. The up to 3-year on-site warranty extension for printer and options.
Your KYOCERA Business Partner:
Product depicted includes optional extras.

1004DSE1370DNEMC

Kyocera Mita (UK) Ltd, 8 Beacontree Plaza, Gillette Way, Reading, RG2 0BS Tel: 1500, Fax: 1108, www.kyoceramita.co.uk info@kyoceramita.co.uk Kyocera does not warrant that any specification mentioned will be error-free. Specifications are subject to change without notice. Information is correct at time of going to press. All other brand and product names may be registered trademarks and their respective holders are hereby acknowledged.

FS-1370DN

OPERATION GUIDE
Please read this Operation Guide before using this machine. Keep it close to the machine for easy reference.
This Operation Guide is for model FS-1370DN. Note This Operation Guide contains information that corresponds to using both the inch and metric versions of these machines. The inch versions of these machines are shown in the screens in this guide. If you are using the metric version, use the messages provided for the inch version as reference only. In the body text, only the inch messages are given if these versions differ only in capitalization. When there is even a slight difference in the message, we have listed the information for the inch version followed, in brackets, by the corresponding information for the metric version. This Operation Guide is intended to help you operate the machine correctly, perform routine maintenance and take a simple troubleshooting action as necessary, so that you can always use the machine in good condition. Please read this Operation Guide before you start using the machine, and keep it close to the machine for easy reference. We recommend the use of our own brand supplies. We will not be liable for any damage caused by the use of third party supplies in this machine. A label shown in the illustration assures that the supplies are our own brand.

Contents

1 Machine Parts.... 1-1 Components at the Front of the Printer.. 1-2 Components at the Rear of the Printer.. 1-2 Operation Panel... 1-3 Loading Paper.... 2-1 Preparing the Paper.. 2-2 Loading Paper into Cassette... 2-2 Loading Paper into MP (Multi-Purpose) Tray.. 2-5 Paper Stopper.... 2-6 Connecting and Printing.. 3-1 Connections... 3-2 Changing Network Interface Parameters.. 3-4 Printing a Network Interface Status Page.. 3-12 Installing the Printer Driver... 3-13 Printing... 3-19 Status Monitor... 3-20 Uninstalling Software (Windows PC).. 3-24 Maintenance... 4-1 General Information.. 4-2 Toner Container Replacement.. 4-2 Maintenance Kit Replacement... 4-5 Cleaning the Printer.. 4-6 Prolonged Non-Use and Moving of the Printer. 4-9 Troubleshooting... 5-1 General Guidelines... 5-2 Print Quality Problems... 5-3 Error Messages... 5-5 Ready, Data, and Attention Indicators.. 5-9 Clearing Paper Jams... 5-10 Appendix... 6-1 Specifications.... 6-2 Environmental Standard Requirements.. 6-4 Index... Index-1
1Legal and Safety Information
Please read this information before using your machine. This chapter provides information on the following topics: Legal Information License Agreements Safety Information Symbols Installation Precautions Precautions for Use About the Operation Guide Conventions in This Guide iv v xi xv xvi xviii xx xxi

Legal Information

CAUTION NO LIABILITY IS ASSUMED FOR ANY DAMAGE CAUSED BY IMPROPER INSTALLATION.

Notice on Software

SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE PRINTER'S EMULATION MODE. The printer is factory-set to emulate the PCL. The emulation mode can be changed.

Notice

The information in this guide is subject to change without notification. Additional pages may be inserted in future editions. The user is asked to excuse any technical inaccuracies or typographical errors in the present edition.No responsibility is assumed if accidents occur while the user is following the instructions in this guide. No responsibility is assumed for defects in the printer's firmware (contents of its read-only memory). This guide, and any copyrightable subject matter sold or provided with or in connection with the sale of the page printer, are protected by copyright. All rights are reserved. Copying or other reproduction of all or part of this guide, or any copyrightable subject matter without the prior written consent of Kyocera Mita Corporation is prohibited. Any copies made of all or part of this guide, or any copyrightable subject must contain the same copyright notice as the material from which the copying is done.

Regarding Tradenames

PRESCRIBE is a registered trademark of Kyocera Corporation. KPDL is trademark of Kyocera Corporation.Hewlett-Packard, PCL, and PJL are registered trademarks of Hewlett-Packard Company. Adobe, Acrobat, Flash, and PostScript are registered trademarks of Adobe Systems Incorporated. Macintosh and Bonjour are registered trademarks of Apple Computer, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Microsoft Windows Server is a trademark of Microsoft Corporation. PowerPC is a trademark of International Business Machines Corporation. CompactFlash is a trademark of SanDisk Corporation. ENERGY STAR is a U.S. registered mark. All other brand and product names are registered trademarks or trademarks of their respective companies. This product was developed using the Workbench Real Time Operating System and Tools from Wind River Systems. This product contains UFST and MicroType from Monotype Imaging Inc.

1. the equivalent of U.S. $25,000 in your local currency; or 2. IBM's then generally available license fee for the Program This limitation will not apply to claims for bodily injury or damages to real or tangible personal property for which IBM is legally liable. IBM will not be liable for any lost profits, lost savings, or any incidental damages or other economic consequential damages, even if IBM, or its authorized supplier, has been advised of the possibility of such damages. IBM will not be liable for any damages claimed by you based on any third party claim. This limitation of remedies also applies to any developer of Programs supplied to IBM. IBM's and the developer's limitations of remedies are not cumulative. Such developer is an intended beneficiary of this Section. Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you. 4. General You may terminate your license at any time. IBM may terminate your license if you fail to comply with the terms and conditions of this license. In either event, you must destroy all your copies of the Program. You are responsible for payment of any taxes, including personal property taxes, resulting from this license. Neither party may bring an action, regardless of form, more than two years after the cause of action arose. If you acquired the Program in the United States, this license is governed by the laws of the State of New York. If you acquired the Program in Canada, this license is governed by the laws of the Province of Ontario. Otherwise, this license is governed by the laws of the country in which you acquired the Program.
Typeface Trademark Acknowledgement
All resident fonts in this printer are licensed from Monotype Imaging Inc. Helvetica, Palatino and Times are registered trademarks of Linotype-Hell AG. ITC Avant Garde Gothic, ITC Bookman, ITC ZapfChancery and ITC Zapf Dingbats are registered trademarks of International Typeface Corporation.
Monotype Imaging License Agreement
1. Software shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as well as the UFST Software. 2. You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and versions of letters, numerals, characters and symbols (Typefaces) solely for your own customary business or personal purposes at the address stated on the registration card you return to Monotype Imaging. Under the terms of this License Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the fonts on more than three printers, you need to acquire a multi-user license agreement which can be obtained from Monotype Imaging. Monotype Imaging retains all rights, title and interest to the Software and Typefaces and no rights are granted to you other than a License to use the Software on the terms expressly set forth in this Agreement.

3. To protect proprietary rights of Monotype Imaging, you agree to maintain the Software and other proprietary information concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access to and use of the Software and Typefaces. 4. You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You agree that any such copy shall contain the same proprietary notices as those appearing on the original. 5. This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This License may be terminated by Monotype Imaging if you fail to comply with the terms of this License and such failure is not remedied within thirty (30) days after notice from Monotype Imaging. When this License expires or is terminated, you shall either return to Monotype Imaging or destroy all copies of the Software and Typefaces and documentation as requested. 6. You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software. 7. Monotype Imaging warrants that for ninety (90) days after delivery, the Software will perform in accordance with Monotype Imagingpublished specifications, and the diskette will be free from defects in material and workmanship. Monotype Imaging does not warrant that the Software is free from all bugs, errors and omissions. 8. THE PARTIES AGREE THAT ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE EXCLUDED. 9. Your exclusive remedy and the sole liability of Monotype Imaging in connection with the Software and Typefaces is repair or replacement of defective parts, upon their return to Monotype Imaging. 10. IN NO EVENT WILL MONOTYPE IMAGING BE LIABLE FOR LOST PROFITS, LOST DATA, OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES CAUSED BY ABUSE OR MISAPPLICATION OF THE SOFTWARE AND TYPEFACES. 11. Massachusetts U.S.A. law governs this Agreement. 12. You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior written consent of Monotype Imaging. 13. Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate. Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in FAR 52.227-19 (c)(2). 14. YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. NEITHER PARTY SHALL BE BOUND BY ANY STATEMENT OR REPRESENTATION NOT CONTAINED IN THIS AGREEMENT. NO CHANGE IN THIS AGREEMENT IS EFFECTIVE UNLESS WRITTEN AND SIGNED BY PROPERLY AUTHORIZED REPRESENTATIVES OF EACH PARTY. BY OPENING THIS DISKETTE PACKAGE, YOU AGREE TO ACCEPT THE TERMS AND CONDITIONS OF THIS AGREEMENT.

DANGER CLASS 3B INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Radio Frequency Transmitter
This machine contains a transmitter module. We, the manufacturer (Kyocera Mita Corporation) hereby declare that this equipment (page printer), model FS-1370DN is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Radio Tag Technology

In some countries, the radio tag technology used in this equipment to identify the toner container may be subject to authorization, and the use of this equipment may consequently be restricted.

Caution Labels

The printer bears any of the following labels.
Laser inside the printer (Laser radiation warning)
For Europe, Asia, and other countries

For U.S.A. and Canada

CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. These regulations apply to laser products manufactured after August 1, 1976. Compliance is mandatory for products marketed in the United States. A label indicating compliance with the CDRH regulations must be attached to laser products marketed in the United States.

Ozone Concentration

These printers generate ozone gas (O3), which may concentrate in the place of installation and cause an unpleasant smell. To minimize the concentration of ozone gas to less than 0.1ppm, we recommend you not to install the printer in a confined area where ventilation is blocked.
DECLARATION OF CONFORMITY TO 2004/108/EC, 2006/95/EEC, 93/68/EEC, 1999/5/EC and 2009/125/EC We declare under our sole responsibility that the product to which this declaration relates is in conformity with the following specifications. EN55024 EN55022 Class B EN61000-3-2 EN61000-3-3 EN60950-1 EN60825-1 EN300 330-1 EN300 330-2 EN62301
Canadian Department of Communications Compliance Statement
This Class B digital apparatus complies with Canadian ICES-003.
Avis de conformit aux normes du ministere des Communications du Canada

Other precautions

Connect the power plug to the closest outlet possible to the machine. The power supply cord is used as the main disconnect device. Ensure that the socket/outlet is located/installed near the equipment and is easily accessible.

Handling of plastic bags

Keep the plastic bags that are used with the machine away from children. The plastic may cling to their nose and mouth causing suffocation.

Precautions for Use

Cautions when using the machine
Do not place metallic objects or containers with water (flower vases, flower pots, cups, etc.) on or near the machine. This situation presents a danger of fire or electrical shock should they fall inside. Do not remove any of the covers from the machine as there is a danger of electrical shock from high voltage parts inside the machine. Do not damage, break or attempt to repair the power cord. Do not place heavy objects on the cord, pull it, bend it unnecessarily or cause any other type of damage. These types of situations present a danger of fire or electrical shock. Never attempt to repair or disassemble the machine or its parts as there is a danger of fire, electrical shock or damage to the laser. If the laser beam escapes, there is a danger of it causing blindness. If the machine becomes excessively hot, smoke appears from the machine, there is an odd smell, or any other abnormal situation occurs, there is a danger of fire or electrical shock. Turn the main power switch off ( ) immediately, be absolutely certain to remove the power plug from the outlet and then contact your service representative. If anything harmful (paper clips, water, other fluids, etc.) falls into the machine, turn the main power switch off ( ) immediately. Next, be absolutely certain to remove the power plug from the outlet to avoid the danger of fire or electrical shock. Then contact your service representative. Do not remove or connect the power plug with wet hands, as there is a danger of electrical shock. Always contact your service representative for maintenance or repair of internal parts.
Do not pull the power cord when removing it from the outlet. If the power cord is pulled, the wires may become broken and there is a danger of fire or electrical shock. (Always grasp the power plug when removing the power cord from the outlet.) Always remove the power plug from the outlet when moving the machine. If the power cord is damaged, there is a danger of fire or electrical shock. If the machine will not be used for a short period of time (overnight, etc.), turn the power switch off (O). If it will not be used for an extended period of time (vacations, etc.), remove the power plug from the outlet for safety purposes during the time the machine is not in use. Always hold the designated parts only when lifting or moving the machine. For safety purposes, always remove the power plug from the outlet when performing cleaning operations.

If dust accumulates within the machine, there is a danger of fire or other trouble. It is therefore recommended that you consult with your service representative in regard to cleaning of internal parts. This is particularly effective if accomplished prior to seasons of high humidity. Consult with your service representative in regard to the cost of cleaning the internal parts of the machine.
Do not place heavy objects on the machine or cause other damage to the machine. Do not open the upper front cover, turn off the main power switch, or pull out the power plug during printing. When lifting or moving the machine, contact your service representative. Do not touch electrical parts, such as connectors or printed circuit boards. They could be damaged by static electricity. Do not attempt to perform any operations not explained in this handbook. Use shielded interface cables.
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Cautions when Handling Consumables
Do not attempt to incinerate the Toner Container. Dangerous sparks may cause burns. Keep the Toner Container out of the reach of children. If toner happens to spill from the Toner Container, avoid inhalation and ingestion, as well as contact with your eyes and skin. If you do happen to inhale toner, move to a place with fresh air and gargle thoroughly with a large amount of water. If coughing develops, contact a physician. If you do happen to ingest toner, rinse your mouth out with water and drink 1 or 2 cups of water to dilute the contents of your stomach. If necessary, contact a physician. If you do happen to get toner in your eyes, flush them thoroughly with water. If there is any remaining tenderness, contact a physician. If toner does happen to get on your skin, wash with soap and water.
Do not attempt to force open or destroy the Toner Container.
After use, always dispose of the Toner Container in accordance with Federal, State and Local rules and regulations. Store all consumables in a cool, dark location. If the machine will not be used for an extended period of time, remove the paper from the cassette, return it to its original package and reseal it.

Introduction-xix

About the Operation Guide
This Operation Guide contains the following chapters:
1 Machine Parts This chapter explains the names of parts. 2 Loading Paper
This chapter explains paper specifications for this printer and how to load paper into the cassette or MP tray. 3 Printing

. Each time you press

, the selection changes.
>>IP Address 000.000.000.000
>>Subnet Mask 000.000.000.000
>>Gateway 000.000.000.000
>>Bonjour Off >>Subnet Mask 000.000.000.000
Display the item you want to set and press [OK]. A blinking question mark (?) appears while you are setting DHCP and Bonjour. A blinking cursor (_) appears while you are setting IP Address, Subnet Mask and Gateway. Press or Bonjour. to select On or Off as the setting for DHCP and
For the IP Address, Subnet Mask and Gateway settings, press or to move the blinking cursor to the number you want to change (000 to 255). Use and to move the cursor right and left. Note Check with your network administrator for the network address settings.
Press [OK]. Press [MENU]. The display returns to Ready.

TCP/IP (IPv6)

This section describes how to enable the TCP/IP (IPv6) protocol.
>TCP/IP (IPv6) On >>RA(Stateless) Off
If TCP/IP (IPv6) is set to Off, use [OK]. Press. Each time you press or

to select On and press

>>DHCPv6 Off >>RA(Stateless) ? Off
Display the item you want to set and press [OK]. A blinking question mark (?) appears while you are setting RA(Stateless) and DHCPv6.

>>DHCPv6 ? Off

Press or to select On or Off as the setting for RA(Stateless) and DHCPv6. Note Check with your network administrator for the network address settings.
NetWare, AppleTalk, IPP, SSL Server, IPSec and Security Level settings 1 2
Press [MENU]. Press or repeatedly until Security > appears.

Security

Press. Each time you press or , the selection changes. Refer to the explanations below when specifying the settings. If you are using NetWare, AppleTalk, IPP, SSL Server or IPSec to connect to a network, you must enter an administrator ID and press [OK]. By default, the administrator ID is "3500".

Password _

If you are using NetWare, AppleTalk, IPP, SSL Server or IPSec to connect to a network, you must enter an administrator password and press [OK]. By default, the administrator password is "3500".

>NetWare On

Set this item to On when you connect to a network using NetWare. In submenu, frame mode can be selected from Auto, 802.3, Ethernet-II, SNAP and 802.2.

>AppleTalk On

AppleTalk must be activated (On) for networking with Macintosh computers except Mac OS X 10.6.

>IPP Off

Set this item to On when you connect to a network using IPP.

>SSL Server Off

Set this item to On when you connect to a network using SSL Server. Submenu has items including DES, 3DES, AES, IPP over SSL and HTTPS.

Select Custom Mode.

Following the instructions in the install wizard window, select the software packages to be installed and the specify the port, etc. For details, refer to Custom Installation in the printer driver operation manual on the CD-ROM.
Installation on a Macintosh
This section explains how to install the printer driver in Mac OS X 10.6.
Turn on the printer and the Macintosh. Insert the included CD-ROM (Product Library) into the CD-ROM drive. Double-click the CD-ROM icon. Double-click either OS X 10.2 and 10.3 Only, OS X 10.4 Only or OS X 10.5 or higher depending on your Mac OS version.
Double-click Kyocera OS X x.x.
The printer driver installation program starts up.
Choose Select Destination, Installation Type and then install the printer driver as directed by the instructions in the installation software. Note In addition to Easy Install, the Installation Type options include Custom Install, which allows you to specify the components to be installed.
IMPORTANT In the Authenticate screen, enter the name and password used to log in to the operating system.
This completes the printer driver installation. Next, specify the print settings. If an IP or AppleTalk connection is used, the settings below are required. If a USB connection is used, the printer is automatically recognized and connected.
Open System Preferences and click Print & Fax.
Click the plus symbol (+) to add the installed printer driver.
10 Click the IP icon for an IP connection or the AppleTalk icon for an
AppleTalk connection and then enter the IP address and printer name. When you click the AppleTalk icon for an AppleTalk connection, enter the printer name. Note AppleTalk icon is not displayed on Mac OS X 10.6.
For a Bonjour connection, click the default icon and select the printer for which Bonjour appears in Connection.
11 Select the installed printer driver and click Add.
12 Select the options available for the printer and click Continue.
13 The selected printer is added. This completes the printer setup

procedure.

Printing
This section explains the printing procedure from an application software. You can specify the printing settings from each tab on KX Driver. KX Driver is stored in the CD-ROM (Product Library). For more information, refer to the Printer Driver User Guide in the CD-ROM.

About KX Driver

KX Driver consists of the following tabs.
Quick Print Use this tab to define basic print options into group profiles that can be accessed quickly and easily. Basic Use this tab to select the page size and orientation. The paper source and duplex printing are also selected. Layout Use to create multiple pages on a single sheet of paper. Also contains the scaling option. Imaging Select this tab to change the print quality, and the font or graphic settings. Publishing Use to add covers or page inserts to your output. You can also produce a set of transparencies with a blank or printed sheet interleaved using Transparency Interleaving. Advanced Use to set up and add watermarks to your output. This tab incorporates the PRESCRIBE commands into the output using the Prologue/Epilogue feature.

The printer prints a status page but data from the computer is not being printed.
Check Items Check the power cord is property plugged into power outlet. Check the power switch is in the On ( | ) position.
Check program files and application software.
Corrective Actions Select half speed mode using the printer driver. Refer to Print Quality Problems on page 5-3. This is a problem specific to the Windows OS. It is not a printer problem. It does not affect print quality. Refer to Clearing Paper Jams on page 5-10. Connect both ends of the power cord securely. Try replacing the power cord. Refer to Installation Guide for more information. Refer to the Installation Guide for more information. Try printing another file or using another print command. If the problem occurs with a specific file or application, check the printer settings for that application. Connect both ends of the interface cable securely. Try replacing the printer cable. Refer to the Installation Guide for more information. Depending on the operating environment of the printer and the condition of the paper, heat generated during printing can evaporate water moisture in the printed paper, emitting vapor from the printer. In this case, printing can be continued without any problem. To correct this, increase the temperature in the room, and use paper that has been stored in a dry place.
Check the interface cable.
Vapor is emitted near the top tray.
Check if the temperature is low near the location of the printer, or if the paper that is being used has been exposed to humidity.
Printer problems may be solved easily by following the tips below. When you have encountered a problem that cannot be solved following the guidelines above, try the following: Restart the computer you are using to send print jobs to the printer. Obtain and use the latest version of the printer driver. The latest versions of printer drivers and utilities are available at: http://www.kyoceramita.com/download/. Make sure that the procedures for printing are correctly followed in the application software. Consult the documentation supplied with the application software.

Print Quality Problems

The tables and diagrams in the following sections define print quality problems and the corrective action you can conduct to solve the problems. Some solutions may require cleaning or replacing parts of the printer. If the suggested corrective action will not solve the problem, call for service representative.
Printed Results Completely blank printout
Corrective Action Check the toner container. Open the front cover and check that the toner container is correctly installed in the printer. Refer to Toner Container Replacement on page 4-2.
Full single-color printout
Contact your service representative.

Dropouts, stray dots

Drum or developer unit may be damaged. If the problem is not solved even after printing several pages, call for service representative.

Vertical streaks

Check the toner container and if necessary replace. Refer to Toner Container Replacement on page 4-2. Clean the charger wire. Refer to Cleaning the Printer on page 4-6. Check the charger cleaner of the drum unit is in its original position. Refer to Cleaning the Printer on page 4-6.
Printed Results Faint or blurred printing
Corrective Action Check the toner container and if necessary replace. Refer to Toner Container Replacement on page 4-2. Clean the charger wire. Refer to Cleaning the Printer on page 4-6.

Gray background

Check the toner container and if necessary replace. Refer to Toner Container Replacement on page 4-2. Check the developer unit and drum unit are installed correctly. Refer to Cleaning the Printer on page 4-6.
Dirt on the top edge or back of the paper
If the problem is not solved even after printing several pages, clean the registration roller. Refer to Cleaning the Printer on page 4-6. If the problem is not solved after cleaning, call for service representative.
Printing incomplete or out of position
Check that the printing settings are correct in the application software and the printer driver. Check whether the problem is being caused by a PRESCRIBE command error. If the problem occurs only with a specific file or program, the most likely cause is an error in a parameter to a command or command syntax.

Error Messages

The following table lists errors and maintenance messages that you can be dealt with by yourself. If Call service or Error.Power off. is displayed, turn off the printer then turn it back on to see if the printer has recovered. If the printer has not recovered, turn off the printer, disconnect the power cord, and contact your service representative or authorized service center. Some errors cause the alarm to sound. To stop the alarm, press [Cancel]. Message Add paper MP Tray Corrective Action The paper has run out in the paper source displayed. Supply paper according to the paper source displayed (paper cassettes, MP tray, or optional paper feeders).This message is displayed alternately with messages indicating the printer status, such as, Ready, Please wait, and Processing. F### represents a controller error (#=0, 1, 2,.). Call for service representative. The printer does not operate when this message is displayed. #### represents a mechanical error (#=0, 1, 2,.). Call for service representative. The printer does not operate when this message is displayed. The total number of pages printed is also indicated, e.g. 0123456. Displayed when data is being canceled. Canceling data The corresponding paper cassette is not installed. Install the cassette. The cassette number can be 1 (topmost) to 4 (bottom). Please clean the inside of the printer. Refer to Cleaning the Printer on page 4-6. This message will be displayed when replacing the toner container after the message Replace toner Clean printer is displayed. After cleaning the inside of the printer, press [GO] and the printer will be ready for printing. The top cover of the printer is open. Close the printer top cover. Close top cover This message is displayed when Remove Device was selected while a USB flash memory was being used. The previous screen is displayed again 1 or 2 seconds. You attempted to print with a paper size and paper type that cannot be used for duplex printing. Press [GO] to print onto one-side of the paper only. You can select an alternative paper size and type by pressing the or. You can also press [MENU] and change the tray setting inside the menu, which will automatically cancel the error and output resumes. At the same time [ATTENTION] indicator will light up and [READY] indicator will start flashing. Turn the power switch off and then back on again. If this message still remains, turn the power switch off, and contact your service representative or authorized service center. The printer controller and operation panel cannot exchange data. Turn the printer off and unplug it from the mains power supply. Then contact your service representative or authorized service center. See the back page of this manual for the relevant phone numbers.

Unknown toner

installed

Unknown toner PC

USB memory error Press GO Use alternative? Cassette 1

Wrong ID

Wrong Password

Storage Error Codes

CompactFlash (CF) Card and USB Flash Memory Errors
Code 01 Meaning The printer does not support the CF card inserted, or the CF card is broken. Insert the correct CF card. For more information, refer to Memory Card (Using the memory card) section in the Advanced Operation Guide. The CF card is not installed. Recheck the requirements for using the system and the CF card. The CF card is write protected. Check the CF card's status. There is not enough space in the CF card. Delete unnecessary files or use a new CF card. The specified file is not on the CF card or the USB flash memory. There is not enough printer memory to support the CF card system. Increase printer memory. The USB flash memory is write protected, or invalid. Check the USB flash memorys status.

RAM Disk Errors

Code 06 Meaning Format error. Try turning the power off and on again. RAM disk mode is Off. Turn RAM disk mode On from the operation panel. No disk space. Purge unnecessary files. Specified file is not on disk. Insufficient printer memory to support the RAM disk system. Expand printer memory.
Ready, Data, and Attention Indicators
The following indicators light during normal operation and whenever the printer needs attention. Depending on the status of lighting, each indicator has the following meaning: Indicator Description Flashing. Indicates an error that you can resolve. Refer to Error Messages on page 5-5. On. Indicates that the printer is ready. The printer prints the data it receives. Off. [Cancel] was pressed during Ready is displayed. Data can be received but will not be printed. To resume printing, press [Cancel] again. Printing is canceling. Also, indicates when paper jam occurred, toner has run out, cover is open, and so on. Flashing. Indicates that a data is being received. On. Indicates either that data received is being processed before printing starts, or that data received is being written to or read from a CompactFlash (CF) card, RAM disk, or USB flash memory. Flashing. Indicates that the printer is ready to print when Please wait is displayed. Also indicates that the corresponding paper cassette is not installed. Indicates that the printer requires maintenance such as adding paper, cleaning the printer, replacement of maintenance kit, preparing the toner container, formatting of CF card. On. Indicates when paper jam occurred, toner has run out, cover is open, and so on. If the message includes Press GO, press [GO] to resume printing. The ID or Password entered for the Security, Administrator, or Job Accounting function is not correct. Check the ID or Password, and enter the correct ID or password.

Clearing Paper Jams

If paper jams in the paper transport system, or no paper sheets are fed at all, the Paper jam message appears and the location of the paper jam (the component where the paper jam has occurred) is also indicated. Status Monitor or COMMAND CENTER can indicate the location of the paper jam (the component where the paper jam has occurred). Remove the paper jam. After removing the paper jam, the printer will resume printing.
Possible Paper Jam Locations
The figure below shows the printer's paper paths including the optional paper feeder. The locations where paper jams might occur are also shown here, with each location explained in the table below. Paper jams can occur in more than one component on the paper paths.
Paper jam message Paper jam MP Tray

Paper jam location A

Description Paper jam at the MP tray.

Reference page page 5-12

B Paper jam Cassette 1 C Paper jam Duplexer
Paper jam at the paper cassettes. The cassette number can be 1.

page 5-13

Paper jam inside the duplexer.

page 5-14

Paper jam message Paper jam Printer

Paper jam location D

Description Paper jam inside the printer.

Reference page page 5-15

E Paper jam Rear Cover
Paper jam at the rear cover.

page 5-17

General Considerations for Clearing Jams
Bear in mind the following considerations when attempting paper jam removal:
CAUTION When pulling the paper, pull it gently so as not to tear it. Torn pieces of paper are difficult to remove and may be easily overlooked, deterring the paper jam recovery.
If paper jams occur frequently, try using a different type of paper, replace the paper with paper from another ream, or flip the paper stack over. The printer may have problems if paper jams recur after the paper is replaced. Whether or not the jammed pages are reproduced normally after printing is resumed, depends on the location of the paper jam.

MP Tray 1

Remove the paper jammed at the MP tray.
IMPORTANT Do not try to remove paper that has already been partially fed. Proceed to Inside the Printer on page 5-15.
Reload the MP tray. Open and close the top cover to clear the error and the printer warms up and resumes printing.
Paper Cassette/Paper Feeder 1 2
Pull out the cassette or optional paper feeder. Remove any partially fed paper.
Note Check to see if paper is loaded correctly. If not, reload the paper.
Push the cassette back in securely. The printer warms up and resumes printing.

Duplexer

Paper is jammed in the duplexer. Remove the jammed paper using the procedure given below.

Paper Size

Cassette

Paper Feeder

MP Tray
Magnification ratio Printing Speed
First Print Time (A4, feed from Cassette) Warm-up Time (22C/71.6F, 60 %RH) Paper Capacity Power on Sleep Cassette (1 to 3) MP Tray Output Tray Capacity Continuous printing Resolution Operating Environment Simplex Duplex
Item Controller Supported OS Interface
Description PowerPC 440F5/500 MHz Microsoft Windows 2000/XP/Vista/7, Windows Server 2003/2008 Mac OS X 10.x Hi-Speed USB: 1 Network: 1 (10BASE-T/100BASE-TX)

KUIO-LV(W) slot: 1

PDL Emulation Memory PRESCRIBE PCL 6, KPDL, KPDL (AUTO), Line Printer, IBM Proprinter, DIABLO 630, EPSON LQ-850

Standard Maximum

128 MB 1152 MB 267 mm 14 3/1/1/2" 12 kg/26.5 lb 120 V AC, 60 Hz, 8.0 A/220 to 240 V AC, 50/60 Hz, 4.2 A 925 W (U.S.A./Canada), 987 W (European countries) 584 W (U.S.A./Canada), 553.9 W (European countries) 10.3 W (U.S.A./Canada), 11 W (European countries) when EcoFuser is On. 93.3 W (U.S.A./Canada), 89.3 W (European countries) when EcoFuser is Off.
Dimension (W D H) Weight (without toner container) Power Requirements Power Consumption
Maximum During printing During standby Sleep mode Power off
Expanded memory, Paper Feeder (250-sheet 2)

Options

Environmental Standard Requirements
This machine conforms to the following environmental standard requirements. Time for switching to Sleep mode (default): 15 minutes Duplex Printing: Standard Equipment Durable paper for feeding: Paper made of 100 % recycled paper Note Contact your dealer or service representative for recommended paper types.
Cassette loading paper.. 2-2 Charger cleaner... 4-7 Cleaning charger wire.. 4-7 printer... 4-6 registration roller.. 4-7 Clearing paper jams duplexer... 5-14 inside the printer... 5-15 MP tray.. 5-12 paper cassette...5-13 paper feeder...5-13 rear cover section...5-17 Components at the front of the printer.. 1-2 at the rear of the printer..1-2 Connection power cord..3-3, 3-4 USB cable... 3-2 Custom mode installation method.. 3-15 troubleshooting..5-2
Inside the printer clearing paper jams..5-15 Installation method custom mode...3-15 express mode..3-14 Installation precautions.. xvi Installing the printer driver...3-13 Mac OS..3-15 Windows PC...3-13
Loading paper Cassette...2-2 MP tray...2-5 Lock lever toner container...4-3
Machine parts..1-1 Maintenance Toner container replacement, cleaning.4-1 Moving printer...4-9 MP tray clearing paper jams..5-12 components..1-2 loading paper..2-5
Developer unit clearing paper jams..5-15 Drum unit clearing paper jams..5-15 maintenance...4-6 Duplexer clearing paper jams..5-14
Names Operation panel...1-3 Network interface parameters AppleTalk.. 3-10, 3-11