FS-720 Specifications basic specifications:
Configuration: Resolution: Printer Memory: Electrical Requirements: Dimensions: Weight: Max Duty Cycle: Desktop Monochrome Printer with Standard 250 Sheet Drawer plus Single Sheet Multi-Purpose Tray 600 x 600 dpi Standard / Max 8MB 120V, 60Hz, 6.8A 15.0"W x 15.4"D x 9.6"H 20.3 lbs 12,000 Pages per month
controller specifications:
Controller: Supported PDL / Emulations: Windows OS Compatibility: Connectivity / Interface: Expansion Driver: 32bit RISC Kyocera Mita Advanced Data Stream (KMADS) Windows 98SE/Me/NT4.x/2000/XP Full-Speed USB 2.0 Optional IB-100 External Print Server Host Based

output speeds:

Warm-Up Time: First Print Out: Pages Per Minute: Less than 16 Seconds Less than 11 Seconds 17 Letter / 16 A4 / 15 Legal

paper supply:

Standard Paper Sources: Drawer Paper Size: MPT Paper Size: Paper Capacity: Paper Weight: Input Materials: 250 Sheet Drawer, Single Sheet MPT 8.5" x 11", 8.5" x 13", 8.5" x 14",A4, B5,A5 8.5" x 11", 8.5" x 13", 8.5" x 14",A4, B5,A5, Custom (2.8" x 5.8" - 8.5" x 14") 251 Sheets 16-28 lb Bond via Paper Drawer, 16 lb Bond - 90 lb Index via MPT Bond Paper, Recycled Paper,Transparencies, Labels, Envelopes

consumables:

TK-112E: 2,000 pages @ 5% Coverage
* Ships with 3,000 pages @ 5% Coverage. ISO/IEC 19752 Compliant.
Specifications and design are subject to change without notice. All trademarks and registered trademarks are the property of their respective manufacturers.
Kyocera Mita America, Inc. 225 Sand Road, PO Box 40008, Fairfield, NJ 07004-0008, USA '2005 Kyocera Mita America, Inc.

www.kyoceramita.com/us

FS-720, FS-820 & FS-920 Toner Container
To replace the Toner Container use the instructions below.
CAUTION: Do not attempt to incinerate the Toner Container. Dangerous
sparks may cause burns. Do not attempt to force open or destroy the Toner Container.

Open the Top Cover.

Turn Lock Lever A to the unlock position, push Lock Lever B to the right and pull out the Toner Container. Place the used Toner Container in the plastic bag provided for disposal.
Remove the packaging from the new Toner Container. Shake the container horizontally to distribute the toner evenly.
Remove the label from the Toner Container.
Install the new Toner Container in the printer. Push firmly on the top of the container at the positions marked PUSH HERE, until you hear a click. Turn Lock Lever A to the lock position and close the Top Cover.

Toner Container Capacity

There are two different Toner Container capacities available for this product, one provides approximately 2000 prints and the other approximately 6000 prints. If you change from one capacity to another, perform the following steps to ensure the remaining amount of toner is shown correctly on the status page Toner Gauge.
Install KM-NET for Clients using the CD-ROM supplied and run the program. Select the Menu button located on the left and then the Menu tab. Select Toner and then Black. Select Capacity. The Capacity dialog opens on the right. In the Capacity drop down menu, select the appropriate capacity, 2000 or 6000 pages and select OK.