2200 Series All-In-One

Setup Solutions

January 2004

www.lexmark.com

Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. 2003 Lexmark International, Inc. All rights reserved. 740 West New Circle Road Lexington, Kentucky 40550
Edition: January 2004 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. You can purchase additional copies of publications related to this product by calling 1-800-553-9727. In the United Kingdom and Eire, call +44 (0)044. In other countries, contact your point of purchase. References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the users responsibility. Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. Other trademarks are the property of their respective owners. 2003 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RIGHTS This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense.

Safety information

Use only the power supply provided with this product or the manufacturer's authorized replacement power supply. Connect the power supply cord to an electrical outlet that is near the product and easily accessible. Refer service or repairs, other than those described in the user documentation, to a professional service person. CAUTION: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the power supply cord or telephone, during a lightning storm.

Start here

English
Aligning your print cartridges without a computer
Make sure you follow the steps on the Setup sheet to complete hardware installation. Continue with the following steps to optimize print quality.

Make sure you have loaded paper into the paper support, and then press and hold Scan for three seconds. For help, see Using the control panel on page 4.
An alignment page prints.
Place the printed alignment page onto the scanner glass.
Press Scan. For help, see Using the control panel on page 4.
Once scanning is complete, your print cartridges are aligned for optimal print quality.

Using the control panel

Use this Power/Resume Scan Copy Quantity Black Copy
To Turn the All-In-One on or off. Start the scanning process and open the Lexmark All-In-One Center. Change the number of copies to make. Make a black and white copy. Note: To make a black copy using the Best quality, press this button and hold for at least two seconds.

Color Copy

Make a color copy. Note: To make a color copy using the Best quality, press this button and hold for at least two seconds.

Display

View the number of copies selected. View error codes. For help clearing error codes, see Understanding error codes on the display on page 9.
Note: You can print using only the color cartridge. For optimal print quality, install a black print cartridge.

Setup troubleshooting

When your All-In-One has a problem, before contacting Lexmark Customer Support, check the following items. Make sure:
You have only one Lexmark 2200 Series attached to your computer. You are using one of the following supported operating systems:
Windows 98 Windows XP Windows Me Windows 2000 Mac OS X version 10.1.5 or later Mac OS X version 10.2.3 or later
The power cord is firmly attached to the All-In-One and an electrical outlet. The USB cable is securely attached to your computer and to your printer. Your printer is on.
Note: If your All-In-One is on, the Power button is lit.
The computer is on if you are scanning or printing. You removed the sticker and tape from the bottom of the print cartridges. You installed the print cartridges correctly.
The color print cartridge is secure in the left carrier and the black print cartridge is secure in the right carrier.
The paper is loaded correctly.
Note: Do not force paper into the printer.
There are no flashing error codes on the All-In-One display. For help, see
Understanding error codes on the display on page 9.
You installed the software. To check:
Windows: From your desktop, click Start Programs (or All Programs). If Lexmark 2200 Series does not appear in your list of programs, install the All-In-One software. Macintosh: On your desktop, check to see if there is a Lexmark 2200 Series folder. If it does not appear on your desktop, install the All-In-One software.
The Lexmark 2200 Series is set as your default printer.

Windows:

1 Click Start 2

Settings Printers (Windows 98, Me, 2000). Click Start Control Panel Printers and Faxes (Windows XP). Right-click the Lexmark 2200 Series and make sure that Set as Default is selected.

Macintosh:

1 From the Finder window, choose Applications 2 3
Center. The Printer List dialog is displayed. Select Lexmark 2200 Series. Click Make Default.

Utilities

Power light does not come on 1 2
Check the power supply connections. Press Power on the control panel.
Alignment page does not print 3
Make sure you remove the sticker and transparent tape from both print cartridges. Make sure the color print cartridge is secure in the left carrier and the black print cartridge is secure in the right carrier. Make sure you loaded the paper correctly and did not force the paper into the printer.

Print quality is poor

Align your print cartridges. For help, see Aligning your print cartridges without a computer on page 3.
When I insert the printer software CD, nothing happens
Eject and reinsert the printer software CD. If the printer software installation screen does not appear, continue with the following step. From your desktop, double-click My Computer (In Windows XP, click Start My Computer). Double-click the CD-ROM drive icon. If necessary, double-click setup.exe. When the printer software installation screen appears, click Install. Follow the instructions on each screen to complete printer software installation.
Remove the All-In-One software CD from the CD-ROM drive. Restart your computer. Insert the All-In-One software CD. Double-click the Install icon. Follow the instructions on each screen to complete printer software installation.
The All-In-One is not communicating with the computer 5
Disconnect and reconnect both ends of the USB cable. Unplug the printer from the electrical wall outlet. Reconnect the power supply. Make sure your All-In-One is on. Note: If your All-In-One is on, the Power button is lit. Restart the computer. Note: If the problem continues, remove and then reinstall the software. For help, see Removing and reinstalling the software on page 8.
Installation appears incomplete

Windows users:

Right-click the My Computer icon. Windows XP users, click Start to access the My Computer icon. Click Properties. Select the Hardware tab, and then click the Device Manager button. Look for the Other Devices category. If there are any Lexmark devices shown here, highlight them, and then press the Delete key. Note: The Other Devices category displays only when unknown devices are present. Do not delete any Lexmark items unless they are present under the Other Devices category.

Insert the CD, and install the software again. Do not restart the computer. For help, refer to the setup documentation.
Removing and reinstalling the software
If the All-In-One is not functioning properly or if a communications error message appears when you try to use your All-In-One, remove and then reinstall the All-In-One software. Windows:
From your desktop, click Start Uninstall.

Programs

Lexmark 2200 Series
Follow the instructions on your screen to remove the All-In-One software. Restart your computer before reinstalling the All-In-One software. Insert the CD, and then follow the instructions on your screen to install the software.

Mac OS X:

From your desktop, double-click the Lexmark 2200 Series folder. Double-click the Lexmark 2200 Series Uninstaller icon. Complete the user authentication notice, and then click OK. Click Uninstall, and then click OK.
Understanding error codes on the display
When your control panel displays blinking numbers, see the table to correct the problem. Error code 02 Paper Out 03 Paper Jam What you should do 1 Load paper. 2 Press Power to feed paper and resume printing. 1 Press Power. 2 Lift the scanner unit until the scanner support keeps it open. 3 Pull gently to remove the paper jam. 4 Close the scanner unit. 5 Press Power. 6 Print your document again. 04-05 Carrier Stall 1 Press Power. 2 Open the scanner unit. 3 Make sure nothing is blocking the paper or print cartridge path. 4 Close the scanner unit. 5 Press Power. 6 Print your document again. If this does not correct your problem, contact Lexmark Customer Support. 06-14 Contact Lexmark Customer Support.
Copying without a computer
Open the scanner lid of the All-In-One. Place the item you want to copy face down on the glass, and then close the scanner lid. Press Copy Quantity repeatedly until the number of copies (1-9) you want to make appears on the display. Press Black Copy or Color Copy to copy using Normal quality. Note: To copy using Best quality, press and hold Black Copy or Color Copy for at least two seconds.

Using other help sources

If these solutions do not solve your problem:
Refer to the setup documentation that came with your All-In-One. Refer to the Users Guide or Help for information about using and
maintaining your All-In-One and for more troubleshooting information. Windows: To access the Users Guide, click Start View Users Guide. Series Programs Lexmark 2200

Mac OS X: From your desktop, double-click the Lexmark 2200 Series folder.
1 Double-click the Lexmark 2200 Series Help icon.

The Main Page appears.

2 From the Main Page, type a keyword in the search box or click the
Troubleshooting topic link.
Refer to the Lexmark Solution Center software or Lexmark 2200 Series
Utility for more troubleshooting information: Windows:
Programs (or All Programs) Lexmark 2200 Series Lexmark Solution Center. Click the Troubleshooting tab on the left side of the screen.
From your desktop, double-click the Lexmark 2200 Series folder 2200

Series Utility

Double-click the wrench icon on the All-In-One Center software dialog,

if available.

From your software application, choose File
Print. From the pop-up menu in the upper left corner, choose Printer Services. Double-click Lexmark 2200 Series Utility.
Go to http://support.lexmark.com/ for help.

2200 Series All-In-One

Safety information
Use only the power supply provided with this product or the manufacturers authorized replacement power supply. Connect the power supply cord to an electrical outlet that is near the product and easily accessible. Refer service or repairs, other than those described in the user documentation, to a professional service person.

Unpack your All-In-One.

Connect the power supply cord.
Make sure the power light is on.
CAUTION: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the power supply cord or telephone, during a lightning storm.
For more help: 1 Refer to your Users Guide. 2 Visit our Web site. http://support.lexmark.com/ 3 Call us at (800) 332-4120. Monday - Friday (9:00 AM - 9:00 PM EST) Saturday (Noon - 6:00 PM EST)
Phone number and support times may change without notice.

May not be included

Raise the paper support and extend the paper exit tray.

Lift the scanner unit.

Remove the sticker and tape from the print cartridge(s).
Insert the cartridge(s) and snap the lid(s) closed. Left Right

21T0070

www.lexmark.com
P/N 21T0070 EC 21TLexmark International, Inc. All rights reserved.

Close the scanner unit.

Load paper, and adjust the paper guide.
See Setting up without a computer in the Users Guide if you are using your All-In-One without a computer.
Make sure the computer is on.
Continue, if you are using your All-In-One with a computer.

Connect the USB cable.

Important! Click Cancel on all Add New Hardware screens.

Insert the CD.

Install the software.

Windows

Macintosh Continue with step 13.
When I insert the CD, nothing happens Windows 1 Eject and reinsert the printer software CD. If the printer software installation screen does not appear, continue to the next step. 2 From your desktop, double-click My Computer (In Windows XP, click Start My Computer). 3 Double-click the CD-ROM drive icon. If necessary, double-click setup.exe. 4 When the printer software installation screen appears, click Install. 5 Follow the instructions on each screen to complete printer software installation. Macintosh 1 Remove the All-In-One software CD, and then restart your computer. 2 Insert the All-In-One software CD. 3 Double-click the Install icon. 4 Follow the instructions on each screen to complete printer software installation.

Macintosh