Reviews & Opinions
Independent and trusted. Read before buy Lexmark E332N!

Lexmark E332N

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Lexmark E332N Printer, size: 7.8 MB
Related manuals
Lexmark E332N Setup Sheet
Lexmark E332N Reference Guide
Lexmark E332N Setup Sheet (e332n)
Lexmark E332N Quick Reference
Lexmark E332N Safety Information

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Lexmark E332NLexmark E 332n B/W Laser printer - 27 ppm - 250 sheets

1200 dpi x 1200 dpi, Legal, A4, Parallel, USB, EN 10/100Base-TX

The Lexmark E332n is a high-performance monochrome laser printer for creating professional documents. 6, 000-page Toner Cartridge keeps your office productive and efficient with less ordering and fewer replacements. Two-piece toner cartridge is clean and easy to install and replace. Why replace more than you need to? Photoconductor kit lasts up to 30, 000 pages. You may never need to replace it. Adjustable print resolution settings let you optimize print quality and performance. Supports high qu... Read more

 

[ Report abuse or wrong photo | Share your Lexmark E332N photo ]

Video review

Lexmark Fuser E230 E232 E240 E330 E332n E340 Install

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 3. Page 1 of 1. Average Rating:
n8wish 4:46pm on Wednesday, August 11th, 2010 
The Lexmark X2350 prints, scans and copies making it the smallest all-in-one. There is a single ink cartridge and is easy to replace.
jmbeach 8:35am on Friday, April 2nd, 2010 
Lexmark All-inOne Sirs; I purchased this for the first one and rate it with a 3 because of that fact. I use it occasionally but do enjoy it.
mifune 5:08am on Thursday, March 18th, 2010 
Great Printer This, is not the best printer.. But it does the job. I have had it for over 5 years, and the only reason it broke. Tim Robertson MyMac.com Review Lexmark E332n Laser Printer - Review Company: Lexmark Price: $499 US http://www.lexmark.com

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Lexmark E332n

Additional Accessories
Paper Handling Options 550-sheet Drawer 250-sheet Tray 550-sheet Tray Media Font Options Transparencies (Letter, 50 sheets) Transparencies (A4, 50 sheets) Traditional Chinese Font Card Simplified Chinese Font Card Japanese Font Card Korean Font Card Optra Forms Optra Forms Director Optra Forms Manager Optra Forms 16MB Flash Card Optra Forms 32MB Flash Card Optra Forms 2-key Security Option Optra Forms 3-key Security Option External Serial Adapter 802.11g Wireless Print Adapter1 Parallel Cable (10 ft.) Serial Cable (50 ft.) USB Cable (2-meter) MarkNet X2011e Ethernet 10/100BaseTX MarkNet X2012e Ethernet 10/100BaseT/10Base2 MarkNet X2031e Ethernet 10/100BaseTX MarkNet X2030t Token-ring Lexmark N4000e Ethernet 10/100BaseTX 22S0302 22S0300 22S0301 70X7240 12A5010 10G0745 10G0744 10G0746 10G0743 11N0040 11N0052 11N0056 10G0747 10G0748 43H5841 43H1038693 12A2405 46D0060 46D0040 46D0020 46D0000 14T0030

Optra Forms Solutions

Adapters Cables

Connectivity

Requires network connectivity
Impressive 1200 x 1200 dpi or 2400 image quality Up to 27 pages per minute laser output for crisp black text page after page Two-piece imaging system is clean and easy to install and replace Network ready and expandable to meet the needs of growing businesses
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc.,registered in the United States and/or other countries. LexExpressSM is a service mark of Lexmark International, Inc.,registered in the United States and/or other countries. Optra Forms is a trademark of Lexmark International, Inc. Mac OS and the Mac logo are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. PCL is a registered trademark of HewlettPackard Company. The USB-IF logos are trademarks of Universal Serial Bus Implementers Forum, Inc. All other trademarks are the property of their respective owners. 2004. Lexmark International, Inc. All rights reserved.

71K6402

Impressive 1200 x 1200 dpi or 2400 image quality resolution Up to 27 pages per minute laser output Two-piece imaging system is clean and easy to install and replace Network ready and expandable to meet the needs of growing businesses
Supplies & Accessories
Supplies1 6,000-page High Yield Return Program Print Cartridge 6,000-page High Yield Print Cartridge 2,500-page Return Program Print Cartridge 2,500-page Print Cartridge Photoconductor Kit 12A8405 12A8305 12A8400 12A8300 12A8302 16H0056 16H0057 16H0058 16H0059 11K4616 11K4632

Lexmark E332n, E332tn

Product Specifications
Part Number Product Class Speed Resolution Time to First Page Processor Memory (std./max.) US/Canada: 22S0600 (E332n); 22S0700 (E332tn) Desktop/small workgroup laser printer Up to 27 ppm 1200 x 1200 dpi, 2400 image quality, 1200 image quality, 600 x 600 dpi < 8 seconds 200 MHz 32MB/160MB
Lexmark E332n Lexmark E332n Printer 2,500-page Return Program Print Cartridge 30,000-page Photoconductor Kit Power Cord Dust cover for extended paper tray Publications CD Drivers, MarkVision and Utilities CD Lexmark E332tn Lexmark E332n PLUS Additional 550-sheet drawer

In the Box

Memory/Flash Options 16MB SDRAM 32MB SDRAM 64MB SDRAM 128MB SDRAM 16MB Flash Memory Card2 32MB Flash Memory Card2
Connectivity Standard Parallel, USB, Ethernet Optional Serial, Wireless, Token-Ring Network Mgmt. Utility MarkVision Professional Operating Systems Printer Languages Fonts Size (WxDxH) Weight Acoustics Duty Cycle Warranty Windows, Linux, UNIX, Mac and NetWare For a complete list, visit www.lexmark.com. PostScript 3 and PCL 6 emulations and PPDS Migration Tool PCL: 89 scalable and 2 bitmapped. Includes: OCR-A and OCR-B, Code 3 of 9 bar code fonts; PostScript: 89 scalable; PPDS: 39 scalable and 5 bitmapped E332n: 15.6 in. x 13.9 in. x 9.8 in. (396.2 mm x 353.1 mm x 248.9 mm) E332tn: 15.6 in. x 14.8 in. x 14.9 in. (396.2 mm x 376.0 mm x 381.9 mm) E332n: 22 lb. (9.98 kg) E332tn: 31 lb. (14.1 kg) 52 dBA printing; 30 dBA idle Up to 15,000 pages per month 1-year LexExpress

Paper Handling Options3

Single-sheet Multipurpose Feeder (standard) 250-Sheet Drawer (standard)

Media Specifications

550-Sheet Drawer (22S0302) Paper Capacity (sheets) Standard Input Maximum Input Output Paper Sources Standard Input Maximum Input Output Media Types Media Sizes Media Weights E332n 250+1 manual 800+1 manual 150 top or 1 rear E332n 1 top or 1 rear E332tn 800+1 manual 800+1 manual 150 top or 1 rear E332tn 1 top or 1 rear Options not pictured: 250-sheet Tray (22S0300) 550-sheet Tray (22S0301)
Plain paper, envelopes, card stock, paper labels, and transparencies Letter, legal, A4, A5, executive, universal (3 x 5 in. to 8.5 x 14 in.), statement, JIS B5, folio, and envelopes (7 3/4, 9, 10, DL, C5, B5) Plain paper: 16 to 43 lb. (60 to 163 g/m2); Card stock: up to 90 lb. Index (163 g/m2)

Additional Information

Yield is based on approximately 5% print coverage One flash memory slot available 3 Displays all available options for base model

doc1

Index... 125

Contents 5

Notices

of publications related to this product by calling 1-800-553-9727. In the United Kingdom and Eire, call +44 (0)044. In other countries, contact your point of purchase. References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the users responsibility. 2003 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RIGHTS This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense.
Section Edition notice Trademarks Licensing notice Safety information Laser notice The United Kingdom Telecommunications Act 1984 Conventions Electronic emission notices Printer energy consumption Statement of Limited Warranty

Page 9 9

Trademarks Edition notice

Edition: November 2003

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. You can purchase additional copies Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. PictureGrade is a trademark of Lexmark International, Inc. PCL is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Companys designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands. PostScript is a registered trademark of Adobe Systems Incorporated. PostScript 3 is Adobe Systems designation of a set of printer commands (language) and functions included in its software products. This printer is intended to be compatible with the PostScript 3 language. This means the printer recognizes PostScript 3 commands used in various application programs, and that the printer emulates the functions corresponding to the commands. Details relating to compatibility are included in the Technical Reference. Other trademarks are the property of their respective owners.

Notices 6

Licensing notice
The printer resident software contains: Software developed and copyrighted by Lexmark Lexmark modified software licensed under the provisions of the GNU General Public License version 2 and the GNU Lesser General Public License version 2.1 Software licensed under the BSD license and warranty statements Click the title of the document you want to review: BSD License and Warranty statements

Laser notice

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1. Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 5 milliwatt gallium arsenide laser operating in the wavelength region of 770-795 nanometers. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.
GNU General Public License
The Lexmark modified GNU licensed software is free software; you can redistribute it and/or modify it under the terms of the licenses referenced above. These licenses do not provide you any rights to the Lexmark copyrighted software in this printer. Since the GNU licensed software that the Lexmark modifications are based upon is supplied explicitly without warranty, use of the Lexmark modified version is similarly provided without warranty. See the warranty disclaimers in the referenced licenses for additional details. To obtain source code files for the Lexmark modified GNU licensed software, launch the drivers CD that shipped with your printer and click Contact Lexmark.
The United Kingdom Telecommunications Act 1984
This apparatus is approved under the approval number NS/G/1234/J/100003 for the indirect connections to the public telecommunications systems in the United Kingdom.

Conventions

Note: A note identifies something that could help you. CAUTION: A caution identifies something that could cause you harm. Warning: A warning identifies something that could damage your product hardware or software.

Notices 7

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult your point of purchase or service representative for additional suggestions. The manufacturer is not responsible for any radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment. Note: To assure compliance with FCC regulations on electromagnetic interference for a Class B computing device, use a properly shielded and grounded cable such as Lexmark part number 1329605 for parallel attach or 12A2405 for USB attach. Use of a substitute cable not properly shielded and grounded may result in a violation of FCC regulations. Any questions regarding this compliance information statement should be directed to: Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232-3000

Korean MIC statement

If your product includes the following symbol on the regulatory label: the following statement is applicable to your product.
This equipment has undergone EMC registration as a household product. It can be used in any area, including a residential area.

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.
1-meter average sound pressure, dBA 51Machine types 4505-100, 4505-200, 4546-xxx Printing Idling 52Machine types 4505-300, 4505-310, 4547-xxx 30

ENERGY STAR

The EPA ENERGY STAR Office Equipment program is a partnership effort with office equipment manufacturers to promote the introduction of energy-efficient products and to reduce air pollution caused by power generation. Companies participating in this program introduce products that power down when they are not being used. This feature will cut the energy used by up to 50 percent. Lexmark is proud to be a participant in this program. As an ENERGY STAR Partner, Lexmark International, Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

It is sometimes helpful to calculate the total printer energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the printer spends in each mode in order to calculate energy usage. The total printer energy usage is the sum of each mode's energy usage.

Notices 9

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area, please contact Lexmark at 1-859-232-3000, or on the World Wide Web at http:// support.lexmark.com. Remote technical support is provided for this product throughout its warranty period. Lexmark offers a variety of extended warranty programs that include an extension of technical support. For products no longer covered by a Lexmark warranty, technical support may only be available for a fee.

Additional rights

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

Extent of warranty

We do not warrant uninterrupted or error-free operation of a product. Warranty service does not include repair of failures caused by: Modification or attachments Accidents or misuse Unsuitable physical or operating environment Maintenance by anyone other than Lexmark or a Lexmark authorized servicer Operation of a product beyond the limit of its duty cycle Failure to have installed a maintenance kit as specified (if applicable) Use of printing media outside of Lexmark specifications Use of other than Lexmark supplies (such as toner cartridges, inkjet cartridges, and ribbons) Use of other than Lexmark product or component ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD.

Limitation of liability

Your sole remedy under this Statement of Limited Warranty is set forth in this section. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this Statement of Limited Warranty, you may recover actual damages up to the limit set forth in the following paragraph. Lexmark's liability for actual damages from any cause whatsoever will be limited to the greater of 1) $5,000 or 2) the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. In no event will Lexmark be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim. This limitation of remedies also applies to any developer of materials supplied to Lexmark. Lexmarks and the developers limitations of remedies are not cumulative. Such developer is an intended beneficiary of this limitation.

placement area.

8 Click OK.

Using a watermark

2 Click Properties (or Options, Printer, or Setup, depending on the application) to view the 3 Click the Other Options tab. 4 Click Watermark. 5 Select which pages receive the watermark. 6 Select the watermark to use. 7 Select whether to place the watermark on top of or underneath the page image in the
Watermark placement area.

Printing tasks 38

How to cancel a print job
A print job can be canceled from the operator panel or from your computer. The Cancel job light sequence is displayed on the operator panel while the job is being cancelled.
From the printer operator panel
Press and release Cancel to cancel the job currently printing.

From a Windows computer

1 Click Start

Settings Printers.

2 Double-click the printer you are using to print the job.
A list of print jobs appears.
3 Right-click the document you want to stop printing, and then click Cancel.
From a Macintosh computer
When you send a job to print, the printer icon appears on the desktop.
1 Double-click the printer icon on your desktop.
2 Press Control and click the print job you want to cancel. Choose Stop Queue from the

pop-up menu.

Printing tasks 39

4 How to install options

Section How to access the system board How to add a memory card How to add a flash card How to install a 550-sheet drawer How to get the printer driver to recognize installed options Page 49
How to install options 40
How to access the system board
To install a memory or flash card you must access the printer system board. CAUTION: Turn the printer off and unplug the power cord before continuing.
1 Open the front cover by pressing the button on the left side of the printer and lowering the

cover.

How to install options 41

2 Open the rear exit.

3 Open the side cover by pressing the two detents on the front right side of the machine and

swinging the cover back.

How to install options 42
4 Remove the two screws at the top and side of the metal plate covering the system board.
5 Remove the metal plate by rotating it towards the front and to the right.
How to install options 43
How to reattach the system board cover
When you are finished adding a memory or flash card, be sure to properly reattach the system boards metal cover.
1 Insert the two tabs on the right side of the metal plate into the holes toward the back of the

system board and rotate the system board until it is flush against the printer.
2 Screw in the two screws at the top and side of the metal plate. 3 Close the side cover. 4 Close the rear exit. 5 Close the front cover.
How to install options 44

How to add a memory card

The system board has one connector for an optional memory card. The printer can support up to 64MB of additional memory (for a total of 80MB) for the Lexmark E232 and up to 128MB (for a total of 160MB) for the Lexmark E330 and Lexmark E332n. The Lexmark E230 does not support additional memory. CAUTION: If you are installing a memory card after setting up the printer, turn the printer off and unplug the power cord before continuing. Note: Memory options designed for other Lexmark printers may not work with your printer.
1 Access the system board (see How to access the system board). 2 Push open the latches on both ends of the memory

connector.

3 Unpack the memory card.
Warning: Memory and flash memory cards are easily damaged by static electricity. Touch something metal, such as the printer frame, before you touch a memory card. Avoid touching the connection points along the edge of the card.
4 Align the notches on the bottom of the card with
the notches on the connector.
5 Push the memory card firmly into the connector
until the latches on either end of the connector snap into place. It may require some force to fully seat the card.
6 Make sure each latch fits over the notch on each

end of the card.

7 Reattach the system board cover (see How to reattach the system board cover). 8 See How to get the printer driver to recognize installed options.
How to install options 45

How to add a flash card

The system board has one connector for an optional flash card. The printer can support 16MB and 32MB flash cards. Note: The Lexmark E230 and Lexmark E232 do not support flash cards. CAUTION: If you are installing a flash card after setting up the printer, turn the printer off and unplug the power cord before continuing. Note: Flash cards designed for other Lexmark printers may not work with your printer.
1 Access the system board (see How to access the system board). 2 Unpack the flash card.
Warning: Flash cards are easily damaged by static electricity. Touch something metal, such as the printer frame, before you touch a card. Avoid touching the metal pins on the bottom of the card.

Metal pins

3 Holding the card by its sides, align the pins on the card with the holes on the system board.
How to install options 46
4 Push the flash card firmly into place.
The entire length of the connector on the flash card must touch and be flush against the system board. Be careful not to damage the connectors.

Using the operator panel 66
Cancel job / Reset printer
Light sequence: ContinueOn ReadyOn Toner Low/Replace PC KitOn Load PaperOn Paper JamOn ErrorOn
What this light sequence means: The current print job is canceled. The printer is resetting to the user default settings. Any active print jobs are canceled. A user default setting remains in effect until you change it or until you restore the factory default settings.
What you can do: Wait for the message to clear.

Service error

Light sequence: ContinueBlink ReadyBlink Toner Low/Replace PC KitBlink Load PaperBlink Paper JamBlink ErrorBlink
What this light sequence means: The printer has a service error and printing has stopped. What you can do: Turn the printer off and back on. If the lights are still blinking, contact the place where you bought your printer.
Using the operator panel 67

Printer error

Light sequence: ContinueOn ErrorOn
What this light sequence means: The printer has one of the following errors: Memory is full, insufficient to save what is in the buffer, or insufficient to defragment flash memory. A page is too complex to print or is shorter than the set page margins. Resolution of a formatted page is reduced to 300 dpi. A font error occurred. Communication with the host computer is lost.
What you can do: Press Continue twice quickly to see the secondary error code. See Secondary error codes on page 69 for more information. Press Continue to clear the secondary message.

Paper jam printer error

Light sequence: ContinueOn Paper JamOn
What this light sequence means: The printer has a paper jam. What you can do: Press Continue twice quickly to see the secondary error code. See Secondary error codes on page 69 for more information. Press Continue to resume printing once all the jammed pages are cleared from the paper path.
Using the operator panel 68

Secondary error codes

Press and release Continue
twice quickly to display the secondary error code light sequence.
Using the operator panel 69
Paper jam at the input sensor
Light sequence: ContinueOn ReadyOn Paper JamOn
What this light sequence means: A paper jam has occurred at the input sensor, which can be either after the paper leaves the tray and enters the printer or in the manual feeder. What you can do: Clear the paper jam. See How to clear paper jams on page 26 for more information.
Light sequence: ContinueOn ReadyBlink Paper JamOn
What this light sequence means: A paper jam has occurred in the manual feeder. What you can do: Clear the paper jam. See How to clear paper jams on page 26 for more information.
Using the operator panel 70
Paper jams as it exits the tray into the printer
Light sequence: ContinueOn Toner Low/Replace PC KitOn Paper JamOn

What this light sequence means: A paper jam has occurred as the paper is exiting the paper tray and entering the printer. What you can do: Clear the paper jam. See How to clear paper jams on page 26 for more information.
Paper jams as a printed job exits the printer
Light sequence: ContinueOn Load PaperOn Paper JamOn
What this light sequence means: A paper jam has occurred as the paper is exiting the printer. What you can do: Clear the paper jam. See How to clear paper jams on page 26 for more information.
Using the operator panel 71
Light sequence: ContinueOn Toner Low/Replace PC KitOn Load PaperOn Paper JamOn
What this light sequence means: A paper jam has occurred in Tray 1. What you can do: Clear the paper jam. See How to clear paper jams on page 26 for more information.
Light sequence: ContinueOn ReadyOn Load PaperOn Paper JamOn
What this light sequence means: A paper jam has occurred in Tray 2. What you can do: Clear the paper jam. See How to clear paper jams on page 26 for more information.
Using the operator panel 72
Light sequence: ContinueOn ReadyOn ErrorOn
What this light sequence means: The page may not print correctly because the print information on the page is too complex (that is, too large for the printers memory). What you can do: Press Continue to clear the message and continue processing the print job (some of the print data may be lost). To avoid this error in the future: Reduce the complexity of the page by reducing the amount of text or graphics on the page and deleting unnecessary downloaded fonts or macros. Set Page Protect to On in the Local Printer Setup Utility. Install additional printer memory (see How to add a memory card on page 45).
Light sequence: ContinueOn ReadyBlink ErrorOn
What this light sequence means: The printer does not have enough memory to save the data in the buffer. What you can do: Install additional memory (see How to add a memory card on page 45). Press Continue Press Cancel to continue printing the job. to cancel the print job.
Using the operator panel 73
Light sequence: ContinueOn Toner Low/Replace PC KitOn ErrorOn

Host interface disabled

Light sequence: ContinueOn Load PaperBlink Paper JamBlink ErrorOn
What this light sequence means: The printer USB or parallel port has been disabled. What you can do: Press Continue to clear the message. The printer discards any print jobs previously sent. Enable the USB or parallel port by selecting a value other than Disabled for the USB Buffer or Parallel Buffer item in the Local Printer Setup Utility (see Using the Local Printer Setup Utility).
Using the operator panel 77

Memory full

Light sequence: ContinueOn ReadyOn Toner Low/Replace PC KitOn ErrorOn
What this light sequence means: The printer is processing data, but the memory used to store pages is full. What you can do: Press Continue to clear the message and continue printing the job (the job may not print correctly). Press and release Cancel to cancel the print job.
Using the operator panel 78

Short paper

Light sequence: ContinueOn ReadyOn Load PaperOn ErrorOn
What this light sequence means: The paper length is too short to print the formatted data. This occurs when the printer does not know the media size loaded in the tray, or there is a problem feeding the media. What you can do: Make sure the print media you loaded is large enough. Open the front cover, clear the paper path and close the cover to resume printing (see How to clear paper jams on page 26). Press Continue printing the job. Press Cancel to clear the message and continue to cancel the print job.
Using the operator panel 79
Light sequence: ContinueOn ReadyOn Paper JamOn ErrorOn
What this light sequence means: There is not enough free space in the flash memory to store the data you are trying to download. What you can do: Delete fonts, macros, and other data stored on the flash memory to free up space. Press Continue to clear the message and continue printing. Downloaded fonts and macros not previously stored in flash memory are deleted. Install flash memory with more storage capacity. See How to add a memory card on page 45 for instructions on how to install flash memory. Press and release Cancel Press and hold Cancel to cancel the print job. to reset the printer.
Using the operator panel 80
Light sequence: ContinueOn Toner Low/Replace PC KitOn Paper JamOn ErrorOn
What this light sequence means: The printer detects unformatted flash memory. What you can do: Press Continue to clear the message and continue printing. The job may not print correctly. Reformat the flash memory. Refer to the Technical Reference on Lexmarks Web site for more information about reformatting flash. If the error message remains, the flash memory may be defective and should be replaced.
Light sequence: ReadyOn Load PaperOn ErrorOn
What this light sequence means: The code in an internal print server has not been programmed, or the programmed code is not valid. What you can do: Download valid engine code to the internal print server.

MAC Binary PS

Set Card Speed
Automatically detect the connection speed of your network. You can disable this setting to set the speed manually.
* Factory default Megabits per second
Understanding the printer configuration menus 85

Parallel menu

Use the Parallel menu to change printer settings on jobs sent through a parallel port.
Setting NPA Mode Use this setting to: Send print jobs to the printer and query printer status information simultaneously. Receive information at a much higher transmission rate if your printer is set to Fastbytes (if your computer supports Fastbytes) or receive information at a normal transmission rate if your printer is set to Standard. Determine whether the parallel port data is sampled on the leading (On) or trailing (Off) edge of strobe. Configure the printer to process Macintosh binary PostScript print jobs. Values Off On Auto* Standard Fastbytes*

Protocol

Parallel Mode 2

Off On*

OffThe printer filters PostScript print jobs using standard protocol. OnThe printer processes raw binary PostScript print jobs from computers using the Macintosh operating system. This setting often causes Windows print jobs to fail. Auto*The printer processes print jobs from computers using either Windows or Macintosh operating systems.

* Factory default

Setup menu
Use the Setup menu to configure how the printer formats the end of a line depending on the computer system being used.
Setting Auto CR after LF Auto LF after CR * Factory default Use this setting to: Specify whether the printer automatically performs a carriage return after a line feed control command. Specify whether the printer automatically performs a line feed after a carriage return control command. Values Off* On Off* On
Understanding the printer configuration menus 86

USB menu

Use the USB menu to change printer settings on jobs sent through a Universal Serial Bus (USB) port.
Setting NPA Mode Use this setting to: Send print jobs to the printer and query printer status information simultaneously. Values Off On Auto* OffThe printer filters PostScript print jobs using standard protocol. OnThe printer processes raw binary PostScript print jobs from computers using the Macintosh operating system. This setting often causes Windows print jobs to fail. Auto*The printer processes print jobs from computers using either Windows or Macintosh operating systems.

Software and network tasks 90

Macintosh

Macintosh OS 8.6 or later is required for USB printing. To print locally to a USB-attached printer, you must create a desktop printer icon (Macintosh 8.69.x) or create a queue in Print Center (Macintosh OS X).
Creating a desktop printer icon (Macintosh 8.69.x)
1 Install a printer PostScript Printer Description (PPD) file on your computer.
a b Insert the drivers CD. Double-click Classic, and then double-click the installer package for your printer. Note: A PPD file provides detailed information about the capabilities of a printer to your Macintosh computer. c d e f g h Choose the language you want to use, and then click OK. Click Accept after you read the license agreement. Click Continue after you finish with the Readme file. Choose a default paper size. On the Easy Install screen, click Install. All the necessary files are installed on your computer. Click Quit when installation is complete. Note: A PPD for your printer is also available in a downloadable software package on our Lexmark Web site at www.lexmark.com.
2 Do one of the following:
Macintosh 8.69.0: Open Apple LaserWriter. Macintosh 9.19.x: Open Applications, and then click Utilities.
3 Double-click Desktop Printer Utility. 4 Select Printer (USB), and then click OK. 5 In the USB Printer Selection section, click Change.
If your printer does not appear in the USB Printer Selection list, make sure the USB cable is properly connected and the printer is turned on.
6 Select the name of your printer, and then click OK. Your printer appears in the original Printer

(USB) window.

7 In the PostScript Printer Description (PPD) File section, click Auto Setup. Make sure your
printer PPD now matches your printer.
Software and network tasks 91
8 Click Create, and then click Save. 9 Specify a printer name, and then click Save. Your printer is now saved as a desktop printer.
Creating a queue in Print Center (Macintosh OS X)
a b Insert the drivers CD. Double-click Mac OS X, and then double-click the installer package for your printer. Note: A PPD file provides detailed information about the capabilities of a printer to your Macintosh computer. c d e f g h i On the Authorization screen, choose Click the lock to make changes. Enter your password, and then click OK. Click Continue on the Welcome screen and again after you view the Readme file. Click Agree to accept the license agreement. Select a Destination, and then click Continue. On the Easy Install screen, click Install. All the necessary files are installed on your computer. Click Close when installation is complete.

5 Click OK. 6 Select whether you want this printer to be the default printer for the client, and then click

Finish.

7 Print a test page to verify printer installation (see How to print a test page on page 94).
Software and network tasks 99
Note: A PostScript Printer Description (PPD) file provides detailed information about the capabilities of a printer to your UNIX or Macintosh computers. To print to a network printer, each Macintosh user must install a custom PostScript Printer Description (PPD) file and either create a desktop printer on the computer (Mac OS 8.6 to 9.x) or create a print queue in Print Center (Mac OS X). Follow the instructions for your operating system.

Mac OS 8.6 to 9.x

Step 1: Install a custom PPD file Note: Installing the custom PPD is required only if this is the first time the printer has been set up. If the printer was previously installed, go on to Step 2: Create a desktop printer.
1 Insert the drivers CD. 2 Double-click Classic. 3 Double-click the Lexmark Installer icon. 4 Select the language of your operating system, and then click OK. 5 Click Install to install the PPD file for your printer.
Step 2: Create a desktop printer
1 In the Chooser, select the LaserWriter 8 driver. 2 If you have a routed network, select the default zone from the list. If you dont know which
zone to select, look on the Network Setup page under AppleTalk for Zone.
3 Select the new printer from the list. 4 If you dont know which printer to select, look on the Network Setup page under the AppleTalk
heading to find the default name of the printer.
5 Click Create. 6 Make sure there is an icon next to the printer name in the Chooser. 7 Close the Chooser window. 8 Verify printer installation.
a b Click the desktop printer icon you just created. Choose Printing Change Setup.
Software and network tasks 100
If the PPD file displayed in the PostScript Printer Description (PPD) file portion of the menu is correct for your printer, then printer setup is complete. If the PPD file displayed in the PostScript Printer Description (PPD) file portion of the menu is not correct for your printer, repeat Step 1: Install a custom PPD file on page 100.
Mac OS X version 10.1.2 and later
Step 1: Install a custom PPD file
1 Insert the drivers CD. 2 Click Mac OS X
<language>. English.

For example, Mac OS X

3 Double-click the installer icon for your printer to run the installer.
Step 2: Create a print queue in Print Center

a b Press the button on the base of the print cartridge assembly. Pull the toner cartridge up and out using the handle.
3 Unpack the new toner cartridge.
Note: You can use the packing material from the new cartridge to ship the old cartridge back to Lexmark for recycling. See Lexmark Return Program on page 111 for more information.
4 Rotate the cartridge in all directions to distribute the toner.

Supplies information 109

5 Install the new toner cartridge by aligning the white rollers on the toner cartridge with the
white arrows on the tracks of the photoconductor kit and pushing the toner cartridge in as far as it will go. The cartridge clicks into place when correctly installed.

6 Close the front cover.

Supplies information 110

Lexmark Return Program

The Lexmark Return Program is an environmental program in which Lexmark sells new toner cartridges at a special price with the agreement that you will return them, at no cost, only to Lexmark for recycling. Regular toner cartridges without this agreement are also available. Note: Regular toner cartridges can also be returned, at no cost, to Lexmark using the Lexmark Cartridge Collection Program. To learn how to return a cartridge at no cost in your country, visit Lexmarks Web site at www.lexmark.com/recycle.
Refilled toner cartridge notice
Lexmark Return Program toner cartridges cannot be refilled. Lexmark does not recommend the use of third-party remanufactured cartridges. Lexmark cannot assure the excellent print quality and reliability of its toner cartridges after a toner cartridge has been refilled. A substantial reduction in photoconductor kit life is also likely if refilled toner cartridges are used. Warning: Toner cartridge leaks due to refilling can cause failure in several areas of your printer. Printer failures caused by third-party remanufactured toner cartridges are not covered by your Lexmark printer warranty, extended warranty, or service agreement.

 

Technical specifications

Full description

The Lexmark E332n is a high-performance monochrome laser printer for creating professional documents. 6, 000-page Toner Cartridge keeps your office productive and efficient with less ordering and fewer replacements. Two-piece toner cartridge is clean and easy to install and replace. Why replace more than you need to? Photoconductor kit lasts up to 30, 000 pages. You may never need to replace it. Adjustable print resolution settings let you optimize print quality and performance. Supports high quality results on a range of media weights and types.

General
Printer TypeWorkgroup printer - laser - monochrome
Width15.6 in
Depth13.9 in
Height9.8 in
Weight22 lbs
Printer
Print SpeedUp to 26 ppm - B/W - A4 (8.25 in x 11.7 in) Up to 27 ppm - B/W - Letter A Size (8.5 in x 11 in)
Connectivity TechnologyWired
InterfaceParallel, USB, Ethernet 10/100Base-TX
Max Resolution ( B&W )1200 dpi x 1200 dpi
Image Enhancement Technology2400 IQ
PostScript SupportStandard
Language SimulationPostScript 3, PCL 6
Fonts Included89 x PostScript 86 x PCL 44 x PPDS
Processor
Processor200 MHz
RAM
RAM Installed ( Max )32 MB / 160 MB (max)
Technology / Form FactorSDRAM - DIMM 100-pin
Media Handling
Media TypeEnvelopes, transparencies, labels, plain paper, cards
Max Media Size (Custom)8.5 in x 14 in
Media SizesLetter A Size (8.5 in x 11 in), Legal (8.5 in x 14 in), Executive (7.25 in x 10.5 in), A4 (8.25 in x 11.7 in), A5 (5.83 in x 8.25 in), Folio (8.5 in x 13 in), JIS B5 (7.17 in x 10.12 in), Statement (5.5 in x 8.5 in)
Envelope SizesInternational DL (4.33 in x 8.66 in), Com-10 (4.13 in x 9.5 in), International C5 (6.38 in x 9 in), International B5 (6.93 in x 9.83 in), Monarch (3.87 in x 7.5 in), US No 9 (4 in x 9 in)
Total Media Capacity250 sheets
Media Feeder(s)1 x autoload - 250 sheets - Legal (8.5 in x 14 in) weight: 60 g/m2 - 163 g/m2
Max Media Capacity800 sheets
Duty Cycle
Monthly Duty Cycle15000 pages
Cartridge / Printhead Duty Cycle2500 pages
Cartridge / Printhead Included Qty1
Networking
NetworkingPrint server
Connectivity TechnologyWired
Data Link ProtocolEthernet, Fast Ethernet
Expansion / Connectivity
Expansion Slots Total (Free)1 ( 1 ) x memory - DIMM 100-pin
Connections1 x USB - 4 pin USB Type B 1 x parallel - IEEE 1284 (EPP/ECP) - 36 pin Centronics 1 x network - Ethernet 10Base-T/100Base-TX - RJ-45
Miscellaneous
Consumables Included1 x toner cartridge ( black ) - up to 2500 pages
Compliant StandardsFCC Class B certified, CSA, UL 60950 Third Edition, ICES-003 Class B
Power
Power DevicePower supply - internal
Software / System Requirements
Software IncludedDrivers & Utilities, MarkVision
OS RequiredSuSE Linux 8.2, Red Hat Linux 9, SunSoft Solaris 7, HP-UX 11.0, Microsoft Windows 98 Second Edition, Novell NetWare 4.x, UnixWare 7.1, SunSoft Solaris x86 2.6, Microsoft Windows 2000 Server, Microsoft Windows 2000 Advanced Server, Microsoft Windows 2000 Professional, SunSoft Solaris 8, Novell NetWare 5.x, Microsoft Windows Millennium Edition, Red Flag Linux 3.0, IBM AIX 5.2, UnixWare 7.0, SunSoft Solaris x86 7, SunSoft Solaris x86 8, UnixWare 7.1.1, Apple MacOS X, IBM AIX 5.1, Novell NetWare 6.x, Microsoft Windows XP, Red Hat Linux 7.3, SunSoft Solaris 9, SuSE Linux 8.0, SuSE Linux 8.1, Red Hat Linux 8.0, Microsoft Windows Server 2003 Enterprise Edition, Microsoft Windows Server 2003 Standard Edition
Environmental Standards
ENERGY STAR QualifiedYes
Manufacturer Warranty
Service & Support1 year warranty
Service & Support DetailsLimited warranty - 1 year
Environmental Parameters
Sound Emission (Idle)30 dBA
Sound Emission (Operating)52 dBA
Universal Product Identifiers
BrandLexmark International
Part Number22S0600
GTIN00734646018005

 

Tags

WM-FX877 Toner Server Fishfinder 100 FLS1072C Reign 2 148gtle Receiver FS518T Ketron MS60 CT-S510 CMT-DX400 SPH-M350 CU500 Titans MD-8080 TH-42PY85PA Fuser Degroupee KM-C3130 Sp-GPS-22a0933 RM313P Duet II 2400 Zoom ZSA10 DPP-SV77 EFG20 FAX-2900 WH300 Optio 33WR KDC-W534 40-19 S Software Service Manual RS21dans DMT-8 Troubleshooting Inverseur DVD-V6500 FX-250HC R250S PRO KL-780 MS-1905C 42PFL5604H 19317 Node 2 DP372B Ecler NUO2 XAV-70BT Stylus 780 Supermoto Sagem D70T DJX-IIB SH-8016 Driver Download SL-PG490 Lexmark C720 2300C 3000cicr DMR-E55EP Zoom 115 ZI9454X Maxima-2000 ARX7570Z Reset Urc8206 Servers IC-PCR100 Scpt165 NW-S202 HT-X250R Sport 2220 Printer T59840 M-7050 USR5461 Satellite L45 1 0 GA9020S KDL-37V5500 UN55C9000SM WGT624SC Stick RS-1200 42PX5D-EB Samsung 713N DD-20 TS8GMP320 PL408H EZ-20 DVD-P355K TE1025V LSR120H-3 Faronics Core GR-DX25 Beolab 2 ST-4108 MS7308E 1911-tlxb Photoconductor DVD-F65 DVR4100 Bonneville SCC-931TP DPR-1260 RS21hftts ITD68

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101