1200 Series All-In-One

Users Guide
Edition: February 2006 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. To obtain additional copies of publications related to this product, visit the Lexmark Web site at www.lexmark.com. References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the users responsibility. 2006 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RIGHTS This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense.

Safety Information

Use only the power supply and power cord provided with this product or the manufacturers authorized replacement power supply and power cord. Connect the power supply cord to an electrical outlet that is near the product and easily accessible. CAUTION: Do not set up this product or make any electrical or cabling connections, such as the power supply cord or telephone, during a lightning storm. Refer service or repairs, other than those described in the operating instructions, to a professional service person. This product is designed, tested, and approved to meet strict global safety standards with the use of specific Lexmark components. The safety features of some parts may not always be obvious. Lexmark is not responsible for the use of other replacement parts.

Contents

Finding more information.. 4
Scanning, copying, and faxing troubleshooting.16 Removing and reinstalling the software..16
Notices... 17 Learning about the All-In-One.. 4
Setting up the All-In-One.. 4 Understanding the parts of the All-In-One. 4 Using the control panel... 5

Index... 19

Understanding the software.. 5
Using the Lexmark All-In-One Center. 5 Using Print Properties.. 7 Using the Lexmark Solution Center.. 8 Using the Lexmark Photo Editor.. 9

English

Using the All-In-One... 9
Printing... 9 Scanning... 11 Copying... 12 Faxing... 12 Creating fun projects.. 13 Replacing print cartridges.. 13

Troubleshooting.. 14

Troubleshooting checklist... 14 Setup troubleshooting... 14 Printing troubleshooting.. 15

Finding more information

Resource

Setup sheet CD

Learning about the All-In-One
Setting up the All-In-One
If you have not already done so, follow the steps on the Setup Sheet to complete the hardware and software installation. If problems occur during the setup process, see Setup troubleshooting on page 14.

Description

Instructions on how to set up the hardware and software and information on setup troubleshooting Software for the All-In-One, including: Lexmark All-In-One Center Lexmark Photo Editor Print Properties Lexmark Solution Center Drivers for the All-In-One An online Users Guide for basic usage information A Readme file This file provides last-minute updates about technical changes to the All-In-One. To access the Readme file after you install the All-In-One software, click Start Lexmark 1200 Series Readme. Programs
Understanding the parts of the All-In-One
Paper guide Slide next to paper to ensure proper feeding. Paper support Lift to load paper into the All-In-One. Control panel Use the buttons to operate the All-In-One.

Lexmark Web site

http://support.lexmark.com
Information on: UpgradesSoftware upgrade information Customer SupportContact information, order status, and warranty DownloadsDrivers SolutionsTroubleshooting hints and tips ReferenceProduct documentation and product specifications
Top cover Lift to place an item on the scanner glass.
Paper exit tray Extend to hold paper as it exits the All-In-One.
Scanner unit Lift to access the print cartridges.
Understanding the software
The All-In-One software consists of four main components:
The Lexmark 1200 Series All-In-One Center (scanning, copying, and faxing) Print Properties (printing) The Lexmark Solution Center (troubleshooting, maintenance, and cartridge ordering information) The Lexmark Photo Editor (editing graphics)

USB cable Power cord

Using the Lexmark All-In-One Center
Use the Lexmark 1200 Series All-In-One Center software to scan, copy, and fax documents.There are three ways to open the All-In-One Center:

Using the control panel

The All-In-One has a control panel that lets you scan and copy with the press of a button.
Click Start Programs Lexmark 1200 Series Lexmark All-InOne Center. Double-click the Lexmark 1200 Series All-In-One Center icon on the desktop. Press Scan on the control panel. For more information about using the control panel, see page 5.

The All-In-One Main Page appears.
All-In-One Center All-In-One Main Page
Preview section Preview Now

Scan Now Copy Now

Note: Both the computer and the All-In-One must be turned on to make copies.

Creative Tasks

The All-In-One Main Page
The All-In-One Main Page consists of four main sections: Scan, Copy, Creative Tasks, and Preview.

View Saved Images page

Use the View Saved Images page to perform tasks with images that are saved on the computer. The View Saved Images page consists of three sections.

From this section:

You can:
Select a program to send the scanned image to. Choose what type of image is being scanned. Choose how the scan will be used. Note: Click See More Scan Settings to view all settings.

Open with. Print a Copy.

Select a program to send the saved image to. Choose the quantity and color of your copies. Select a quality setting for your copies. Lighten or darken your copies. Enlarge of reduce your copies.
Select the quantity and color of your copies. Select a quality setting for your copies. Adjust the size of the scanned area. Lighten or darken your copies. Enlarge or reduce your copies.
Note: Click See More Copy Settings to view all settings. Creative Tasks Select from a variety of creative ideas. For more information, see page 6.
Note: Click See More Copy Settings to view all settings. Creative Tasks Choose from a variety of creative ideas. Preview section Enlarge or reduce an image. Repeat an image several times on one page. Print an image as a multiple-page poster. E-mail an image to a friend. Fax using your PCs modem. Save an image or document. Edit text found in a scanned document (OCR). Modify an image with a photo editor.
Note: For more information about this page, click the Help button located in the upper right corner of the screen.
Maintain/Troubleshoot page
The Maintain/Troubleshoot page provides you with direct links to the Lexmark Solution Center. Choose from these topics:

Select a region of the preview image to scan. View an image of what will be printed or copied.
Maintain or fix quality problems Troubleshoot All-In-One problems Device status and ink levels More printing ideas and how tos Contact information Advanced (Skin, voice, and communication options) View the software version and copyright information
Note: For more information about the All-In-One Main Page, click the Help button located in the upper right corner of the screen.
For more information about the Lexmark Solution Center, see page 8.

Using Print Properties

Print Properties is the software that controls the All-In-One printing function. You can change the settings in Print Properties based on the type of project you want to create. You can open Print Properties from almost any program:

Print Properties tabs

All of the print settings are on the three main tabs of the Print Properties software: Quality/Copies, Paper Setup, and Print Layout.
1 From the program File menu, click Print. 2 In the Print dialog box, click Properties, Preferences, Options, or Setup
(depending on the program). The Print Properties screen appears.

From this tab:

Quality/Copies
You can change these settings:
Quality/Speed Select a Quality/Speed setting. Multiple Copies Customize how the All-In-One prints several copies of a single print job, collated or normal. Print Color Images in Black and White Select this to print color images in black and white.
Note: Some programs open Print Properties differently.
Print Properties Quality Copies tab and I Want To menu Print Properties tabs Use the Quality/ Copies, Paper Setup, and Print Layout tabs to select the print settings. I Want To menu Select one of the projects from the menu to help print photos, banners, envelopes, posters, and more.

Paper Setup

Type Select the type of paper you are using. Paper Size Select the size of the paper you are using. Orientation Select how you want the document oriented on the printed page. You can print portrait or landscape.

Learn tips about the current status. Solve All-In-One problems.
Using the Lexmark Photo Editor
Use the Lexmark Photo Editor software to edit graphics. To open the Lexmark Photo Editor, click Start Programs Lexmark 1200 Series Lexmark Photo Editor. The Lexmark Photo Editor displays. Use the touch-up tools to edit your graphic.
with the print side facing you. Make sure you select the paper size for your document. For more information, see page 10.
Note: Move your pointer over the tool for a description.

Touch-up tools

Load up to:
100 sheets of plain paper 25 sheets of labels 25 iron-on transfers
20 sheets of banner paper 10 sheets of greeting card stock 10 Hagaki cards 10 envelopes
Note: Do not load envelopes with: Holes, perforations, cutouts, or deep embossing Metal clasps, string ties, or metal folding bars Exposed flap adhesive

Using the All-In-One

The following sections give you everything you need to know for basic printing, scanning, copying, and faxing.
25 sheets of photo/glossy paper 10 transparencies
Note: Since transparencies and photos require more drying time, we recommend that you remove each transparency or photo as it exits and allow to dry to avoid ink smearing.

Printing

The Print Properties I Want To menu (see page 7) provides you with printing wizards to help you complete tasks such as printing banners, photographs, or posters.
1 Depending on what you want to print, load the appropriate type of paper into
the All-In-One. Place the paper against the right side of the paper support
2 Squeeze and slide the paper guide to the left edge of the paper.
To see details about a setting, right-click a setting on the screen, and then select the Whats This? item.

Paper size setting

Orientation setting
9 From the Print Layout tab, select the layout and duplexing settings for the
type of document you are printing. To see details about a setting, right-click a setting on the screen, and then select the Whats This? item.

Layout setting

3 Make sure the All-In-One is turned on. 4 Click File Print. 5 From Print dialog box, click Properties, Preferences, Options, or Setup
(depending on the program). The Print Properties dialog box appears.

Duplexing setting

6 If the printing task you want to perform is on the I Want To menu, click it,
and then follow the instructions on the computer screen; otherwise, click Close at the bottom of the menu.
7 From the Quality/Copies tab, select the quality, speed, and copy settings.
Quality/Speed settings Copy settings
10 Once you have applied all the settings you want in Print Properties, click OK
at the bottom of the screen to return to the Print dialog box.
11 Click Print to complete your task.
8 From the Paper Setup tab, select the paper type, paper size, and orientation.

Scanning

The following steps show you how to scan and save images.
From the Send scanned image to drop-down menu, select a program to send the scanned image to, or click the Creative Tasks section to display a list of projects.
Preview Now button Click to see a preview of the image. Scan Now button Click to scan the item on the scanner bed. Copy now settings Adjust the settings for the scanned item. Creative Tasks Choose what you want to do with the scanned item. Preview section See a preview of the image, and select an area to be scanned.
1 Open the top cover of the All-In-One. 2 Place the item you want to scan facedown on the glass. Make sure the
upper left corner of the front of the item aligns with the arrow
3 Close the top cover. 4 Open the Lexmark All-In-One Center (see page 5).
9 If you are sending the scanned image to a software program, click Scan
Now to complete the scan. If you are using the Creative Tasks section, follow the instructions on the computer screen. For a list of the Creative Tasks available from the All-In-One Main Page, see page 6.
5 Click Preview Now located in the upper right corner of the All-In-One Main
Page. An image of the scanned item appears in the preview section.
6 Click and drag to select a specific area of the preview image to scan. 7 Click See More Scan Settings to review and change the scan settings. 8 Select your scan settings.

Copying

Note: You can make a color or black-and-white copy. Press Color Copy or Black Copy on the control panel.
To make black-and-white, gray, or color copies:

7 Click Copy Now.

Faxing
The following steps tell you how to send a fax using the computer modem.
1 Open the top cover of the All-In-One. 2 Place the item you want to copy facedown on the glass. Make sure the upper
left corner of the front of the item aligns with the arrow.
1 Open the top cover. 2 Place the item you want to fax facedown on the glass. Make sure the upper
3 Close the top cover. 4 Open the Lexmark All-In-One Center (see page 5). 5 From the Creative Tasks section of the All-In-One Main Page, click Fax an

image.

5 Click See More Copy Settings to review and change the copy settings.
The All-In-One Copy section expands:
Preview Now button Click to see a preview of the image. Copy Now button Click to copy your image.
6 Follow the instructions on the computer screen.
Copy settings Adjust the settings for the copy. Preview section See a preview of the image, and select an area to be copied.
6 Select your copy settings.
Note: You may want to reduce or enlarge the image.

Creating fun projects

1 Make sure the All-In-One is on. 2 Lift the scanner unit until the scanner support keeps it open.
The print cartridge carrier moves and stops at the loading position unless the All-In-One is busy.
3 Grasp the tabs on the cartridge lids, and then lift the lids. 4 Remove the old cartridges. Store them in an air-tight container or dispose

of them.

5 If you are installing new cartridges, remove the stickers and transparent
tape from the bottom of the cartridges. Warning: Do not touch the gold contact area on the cartridges.
6 Insert the new cartridges. Make sure the black print cartridge is secure in
the right carrier and the color cartridge is secure in the left carrier, and then snap the lids closed.
7 Lift the scanner unit and push the scanner support back while lowering the
scanner unit until it is completely closed. Lexmarks All-In-One warranty does not cover repair of failures or damage caused by a refilled cartridge. We do not recommend use of refilled cartridges. Refilling cartridges can affect print quality and cause damage to the All-In-One. For best results, use Lexmark supplies.
To create these and other fun projects:
Open the Lexmark Solution Center (see page 8). Click How To. Select a project. Follow the instructions on the computer screen.
Replacing print cartridges
The Lexmark 1200 Series uses the following cartridges:

Black cartridge Color cartridge

Part number:

10N0016 10N27
Note: For information about ordering supplies, see the Maintenance tab on page 8.
This section helps you solve problems you may have with the All-In-One. Additional troubleshooting information is available in the Lexmark Solution Center. For help accessing the Lexmark Solution Center, see page 8.

Setup troubleshooting

Problem:
Power light does not come on Alignment page does not print

Go to page:

Troubleshooting checklist
Before you try to solve the problem, check the following: Is the power cord firmly attached to the All-In-One and a known working electrical outlet? Are both the computer and All-In-One turned on? Is the USB cable securely attached to the computer and the AllIn-One? Did you remove the sticker and transparent tape from both print cartridges? For help, refer to the setup documentation. Is the black print cartridge secure in the right carrier and the color cartridge secure in the left carrier? Is the paper loaded correctly? Make sure you do not force the paper into the printer. Did you install the printer software correctly? For help, refer to the setup documentation. Is the Lexmark 1200 Series set as the default printer? To check, click Start Settings Printers. If the Lexmark 1200 Series is not set as the default printer, you need to remove and then reinstall the software. For help, see page 16.
When I insert the All-In-One software CD, nothing happens All-In-One is not communicating with the computer Installation appears incomplete All-In-One prints slowly Print is too dark or smudged Vertical lines are jagged or edges are not smooth White lines appear in graphics or solid black areas All-In-One has a paper jam Scanning was not successful Scanning or using a scanned image with a software program takes a long time or freezes the computer Edge of the copy does not print Copy button on the control panel does not work Fax function does not work
Power light does not come on
1 Check the power cord connections. 2 Press Power on the control panel.
Alignment page does not print
1 Make sure you remove the sticker and transparent tape from both print
cartridges. For help installing print cartridges, refer to the setup documentation.

2 Make sure the black print cartridge is secure in the right carrier and the color
cartridge is secure in the left carrier.
3 Make sure you loaded the paper correctly and did not force the paper into

the All-In-One.

Printing troubleshooting

All-In-One prints slowly

1 Close all programs not in use. The memory resources may be low. 2 Make sure the Print Properties Quality/Speed setting is set on Normal or
Quick Print. For more information, see page 7.
When I insert the All-In-One software CD, nothing happens
From the Desktop, double-click the My Computer icon, and then double-click the CD-ROM drive icon.
3 Try printing a smaller file. If the memory resources are too low, you may not
be able to print larger files. Consider purchasing more memory.
All-In-One is not communicating with the computer
1 Disconnect and reconnect both ends of the USB cable. For help, refer to the

setup documentation.

Note: Photographs typically have a larger file size. Try lowering the scanning resolution.
2 Unplug the power cord from the electrical wall outlet, plug it back in, and
then press Power. For more information, refer to the setup documentation.
Print is too dark or smudged
1 Remove the paper as it exits. Let the ink dry before handling. 2 Adjust the Quality/Speed setting in Print Properties or in the All-In-One
3 Restart the computer. If the problem continues, remove and then reinstall
the software. For more information, see page 16.
Center. For more information, see page 7 or page 6.
Installation appears incomplete
The software may not be installed properly. Try the following:
The Better or Best Quality/Speed setting may cause smearing if used with plain paper. Try using Normal.
1 Right-click the My computer icon.
For Windows XP, click Start to access the My computer icon.
3 Open the Lexmark Solution Center (see page 8). 4 From the Maintenance tab, click Clean to fix horizontal streaks.
2 Click Properties. 3 For Windows 98 or Windows Me, click the Device Manager tab.
For Windows 2000 or Windows XP, select the Hardware tab, and then click the Device Manager button.
Vertical lines are jagged or edges are not smooth
1 Adjust the Quality/Speed setting in Print Properties. For help, see page 7.
For best print quality, select Better or Best.

2 Align the print cartridges. To align the print cartridges:
a Open the Lexmark Solution Center (see page 8). b From the Maintenance tab, click Align to fix blurry edges.
4 Look for the Other Devices category. If there are any Lexmark devices
shown here, highlight them and, then press the Delete key.
Note: The Other Devices category appears only when unknown devices are present. Do not delete any Lexmark items unless they are present under the Other Devices category.
White lines appear in graphics or solid black areas
Clean the print cartridge nozzles. Going long periods without using the All-InOne can cause the print cartridge nozzles to become clogged. To clean the cartridge nozzles:
5 Insert the CD, and install the software again. Do not restart the computer.
For help, refer to the setup documentation.
1 Open the Lexmark Solution Center (see page 8). 2 From the Maintenance tab, click Clean to fix horizontal streaks.
All-In-One has a paper jam
1 Follow the instructions on the screen for clearing the paper jam. 2 Make sure you are using paper designed for an inkjet printer. For a list of
recommended papers, see page 9.
3 From the Reduce/Enlarge section, click the second button, and then select
Fit to page from the corresponding drop-down menu.
4 Copy your document again.
3 Make sure you are loading the paper correctly. For more information, see

page 10.

Copy button on the control panel does not work
Make sure the computer is on. The computer must be on in order for the AllIn-One to work. Make sure you properly installed the software. For help, refer to the setup documentation. The software must be installed for the copier to work.
4 Make sure the paper guide is against the left edge of the paper. For more
information, see page 10.
Scanning, copying, and faxing troubleshooting
Scanning was not successful
The software may not be installed properly. Follow the instructions for All-In-One is not communicating with the computer on page 15.
Fax function does not work
Make sure the computer and the All-In-One are on. Make sure the computer is connected to a phone line. A phone connection is required for faxing to function. The memory may be full. Wait until the faxes in memory have been sent, and then send the current fax again.

Korean MIC statement

The manufacturer is not responsible for any radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment. Note: To assure compliance with FCC regulations on electromagnetic interference for a Class B computing device, use a properly shielded and grounded cable such as Lexmark part number 1021294. Use of a substitute cable not properly shielded and grounded may result in a violation of FCC regulations.
Any questions regarding this compliance information statement should be directed to: Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232-3000

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296:
1-meter average sound pressure, dBA
Printing Scanning Copying Idling
Values are subject to change. See www.lexmark.com for current values.

ENERGY STAR

Waste from Electrical and Electronic Equipment (WEEE) directive
Advanced tab 8 All-In-One Center, see Lexmark All-In-One Center All-In-One Main Page Copy section 6 Creative Tasks section 6 Preview section 6 Scan section 6 All-In-One status 8
electronic emission statement 17 emission statement 17 envelopes printing 7
iron-on transfers 9 printing 7
labels 9 Lexmark All-In-One Center 5 opening 5 using 5 Lexmark Solution Center 8 Advanced tab 8 Contact Information tab 8 How To tab 8 Maintenance tab 8 opening 8 Printer Status tab 8 Troubleshooting tab 8 loading paper 9
faxing 12 FCC statement 17
banner printing 7 banner paper 9 banners printing 7 black and white, printing in 7 both sides, printing on, see duplexing

glossy paper 9

hardware setup software setup 4 How To tab 8
I Want To change quality settings 7 change speed settings 7 print a banner 7 print a photo 7 print a poster 7 print an envelope 7 print on both sides of the paper 7 see more printing ideas 7 I Want To menu 7 ink cartridges viewing ink levels of 8 ink levels viewing 8 inkjet paper 9

Maintain/Troubleshoot page 6 Maintenance tab 8 multiple copies 7
card stock 9 cartridges part numbers 13 viewing ink levels of 8 Contact Information tab 8 control panel 5 copies 7 copy settings 6 copying 12

orientation, selecting 7

paper acceptable types of 9 loading 9 paper exit tray 4 paper guide adjusting 10 Paper Setup tab 7

duplexing 7

parts of your All-In-One 4 photo paper 9 photos printing 7 scanning 11 poor quality printing 15 posters printing 7 Preview Now button 11 Preview section Preview Now button 11 Print/Copy preview 6 Scan preview 6 print cartridges viewing ink levels of 8 Print Layout tab 7 Print Properties 7 I Want To menu 7 opening 7 Options menu 7 Paper Setup tab 7 Print Layout tab 7 Quality/Copies tab 7 Save Settings menu 7 tabs 7 printing 9 banners 7 envelopes 7 photos 7 posters 7 Printing Status window changing appearance of 8
replacing print cartridges 13
Save Settings menu 7 saved images viewing 6 scan settings 6 scanner unit 4 scanning 11 placing an item on the glass 11 settings, saving for future use 7 setup 4 software reinstalling 16 removing 16 sound, see voice notification Status tab 8
top cover 4 transparencies 9 troubleshooting copying problems 16 faxing problems 16 scanning problems 16 troubleshooting checklist 14 Troubleshooting tab 8
View Saved Images page 6 Open with. section 6 Print a Copy.section 6 voice notification turning on or off 8

Quality/Copies tab 7

reinstalling software 16 removing software 16

www.lexmark.com

23 May 2006
Lexmarks new all-in-ones raise the bar on value and ease of use in home printing
- New toolbar optimises printing of Web content Lexmark International today introduced three new all-in-one (AIO) printers that deliver industry-leading value and ease of use for the home printing market. The new Lexmark X3480 and X2470 AIOs offer some of the best values in the industry for feature-rich direct photo printing and reliable everyday print, scan and copy functionality. The X3480 and X2470 also include the new Lexmark Web Toolbar, which makes it quick and easy to print pages, text and photos from the Web. The new Lexmark X1270 is the industrys price-leading AIO, combining high quality printing, scanning and copying in a compact, stylish design. Our new family of all-in-ones gives your family the capability to do more, whether you are printing homework, Web pages, photos or other everyday documents. These reliable, easy-to-use all-in-ones represent a terrific value, said Najib Bahous, Lexmark vice president and president of its Consumer Printer Division. Lexmark X3480 AIO with Premium Photo Features The new Lexmark X3480 AIO was designed for home users who demand a reliable multifunction printer with broad general purpose functionality at an affordable price. With premium photo features, print speeds up to 17 ppm, as well as a 48-bit colour scanner and colour copier, the versatile X3480 is a perfect choice for consumers who need one machine to do it all. With PictBridge, card slots, and Lexmark's first scannable photo proof sheet, the X3480 makes photo printing a snap. Working directly from a memory card, users can print a proof sheet that displays thumbnail images of all their photos, then select the images they wish to print by marking directly onto the proof sheet. They can then scan the sheet to print brilliant, borderless 4x6-inch photos automatically. Lexmark X2470 AIO with PictBridge The X2470 is Lexmarks new three-in-one printer, incorporating direct photo printing, scanning and copying functionality into one sleek, compact unit at the best price point in its class. A perfect choice for busy households with multiple users, the X2470 prints at speeds up to 17 ppm and copies and scans with the touch of a single button. Consumers can plug their cameras directly into the easily accessible front-panel PictBridge port and press a single button to print borderless 4X6 photos. The X3480 and X2470 both feature Lexmarks specially designed single cartridge printing system, which produces vibrant photos, colour graphics and text with a single technology-rich cartridge, eliminating the cost and hassles of buying multiple cartridges.
Lexmark introduces new Web toolbar Included with the purchase of the Lexmark X3480 and X2470 is the new Lexmark Web Toolbar, which makes it easy to format and print pages, text and photos from the Web. With just a few clicks, users can choose what they want to print from their favorite Web sites, eliminating advertisements, and other unwanted elements. While viewing the Web site, they can easily choose to print the whole page or just the text without cutting off the edges. Lexmark's Web Toolbar also enables users to adjust the size of photos, as well as select normal or draft quality printing options. Lexmark X1270 AIO The new Lexmark X1270 is the industrys price-leading AIO and a perfect choice for the cost-conscious consumer looking for great everyday print/copy/scan functionality. For less than 50* , consumers will get the quality, speed and ease of use they demand in their home printer along with an attractive new colour scheme. The X1270 delivers speeds up to 17/9 ppm for black/colour printing, as well as up to 4,800 dpi print quality, a 48-bit colour scanner and colour copier. Lexmark Z645 delivers top value in single-function printing In addition to the new all-in-one printers, Lexmark has introduced the new Z645, the best-priced single-function printer in the market. Its small and fast, producing high quality text and graphics at speeds up to 17/9 ppm for black/colour. With its compact design and a stylish new colour scheme, this handy little machine fits easily into any room in the house. Pricing and availability All products will be available from mid June. Estimated street prices are as follows: X3480 79.99 * Available in Dixons Store Group: PC World, Currys, Dixons X2470 59.99 * Available in all main electrical retail stores X1270 49.99* Available in all main electrical retail stores Z645 39.99* Available in all main electrical retail stores

About Lexmark Lexmark International, Inc. (NYSE: LXK) makes it easier for businesses and consumers to move information between the digital and paper worlds. Since its inception in 1991, Lexmark has become a leading developer, manufacturer and supplier of printing and imaging solutions for customers in more than 150 countries. Lexmark reported $5.2 billion in revenue in 2005, and can be found on the Internet at www.lexmark.com.
All prices, features, specifications and capabilities are subject to change without notice. Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the U.S. and/or other countries. All other trademarks are the property of their respective owners. *All prices are estimated street prices in stering actual prices may vary.
For further information please contact: Gemma Cohen Red Consultancy Tel: 6434 Email: gemma.cohen@redconsultancy