Oxygen 8

version: Oxy8_050503

User Guide

Introduction.2 Oxygen 8 Features.2 Oxygen 8 Overview.2 Whats in the Box.3 Guide to Getting Started.4 Hardware Installation.4 Software Installation.4 USB Driver Installation for Windows.4 USB Driver Installation for Macintosh.10 First Time OMS Configuration Instructions.12 Setting Up Your MIDI Studio.12 Using the Oxygen 8 in your Application Software.14 Oxygen 8 MIDI Functions.14 MIDI Functions In Standalone Mode.14 Default Settings of The Oxygen 8.15 Oxygen 8 Panel Features.15 Top Panel.15 Utilizing the Key Programming Assignment Keys.16 Rear Panel.19 Specifications.20 Technical Support & Contact Information.21 Appendix A-Midi Charts.22 Oxygen 8 Warranty Information.24

Introduction

Congratulations on your purchase of the Oxygen 8, part of the USB Keystation series of MIDI controllers brought to you by M-Audio.You may use your Oxygen 8 in conjunction with a USB equipped PC or Macintosh computer and appropriate music software to enter a full range of MIDI note and controller information. You will be able to discover the wonderful world of Computer Music with a set of complete musical instruments from your sound card, sound modules, or workstation. The Oxygen 8 gives you full control over MIDI parameters, while utilizing proven M-Audio USB MIDI interface technology.The Oxygen 8 will also serve your needs as a standalone MIDI controller. This manual will help you become familiar with the powerful features of the Oxygen 8.After reading the manual carefully, you will have a clear understanding of how to transmit different MIDI messages to other instruments and equipment. For ease of use of MIDI implementation, we strongly recommend that you have the manual at hand when you are using the keyboard, especially if you are new to the world of MIDI.

Oxygen 8 Features

The Oxygen 8 MIDI controller keyboard provides 25 dynamic keys, pitch and mod wheels, a data slider, and 8 assignable rotary controllers. Connects easily to your computers USB port. No tools, and no disassembly is required.When used with USB, the Oxygen 8 may be parasitically powered by your computers USB port. The Oxygen 8 may also be used as a completely portable standalone controller when powered by 6 AA-size batteries. The Oxygen 8 provides two MIDI OUT jacks for connecting to MIDI devices from either your computer, or as a standalone MIDI controller. There is also a socket for an optional sustain-footswitch. Although the Oxygen 8 has no built-in sound capabilities, it offers a great variety of useful MIDI functions.

Oxygen 8 Overview

The Oxygen 8 is a fully functional MIDI controller. Its 25 keys can be set to play any octave or transposed pitch, while the Oxygen 8s pitch wheel, mod wheel and data slider with the addition of eight programmable rotary knobs make it the most versatile MIDI controller of its class. Its compact size and ability to run on battery power make it the ultimate in portable keyboard controllers.Virtually any type of MIDI controller information can be sent from the Oxygen 8 to your computer, using the power and convenience of the Mac or PC computers USB port. Additionally, the Oxygen 8 can operate as a standalone MIDI controller, independent of the computer. The rear panel MIDI port marked keyboard is used for this purpose.
Contained within the Oxygen 8 is a USB MIDI interface. Simply plug the Oxygen 8 into your computers USB port, install the included drivers and enable the MIDI interface within your music software. This combination of a versatile keyboard controller and a USB MIDI interface allows you record and control MIDI information within your music application, plus adds a MIDI output port to which you can connect a MIDI sound module or drum machine.The rear panel MIDI port marked USB is used for this purpose. The Oxygen 8 may be powered by one of three sources: external power supply, internal batteries, or parasitically from the voltage it receives from the USB port. For the most consistent perfomance, we recommend using a power supply or batteries, even when using the Oxygen 8 with your computers USB port.To power from the USB port only, plug the Oxygen 8 directly into the computers USB port, or into a powered USB hub.When using the Oxygen 8 in standalone mode, a power supply or batteries must be used. Six AA-size batteries are required when using battery power. When using an external power supply (optional), it is important to use only a supply with the proper 9vDC, 500ma rating.These may be purchased locally or through MIDIMAN.
On a PC: You must be running Windows 98 or higher to properly use the
Oxygen 8. Also, your motherboard must support USB or you will need to install a PCI to USB host adapter to provide the USB ports. It is possible for a motherboard to support USB and yet not have the physical port connectors installed. A simple USB back panel extender can be purchased at a computer supply store and can be installed easily to provide USB port connectors.

On an Apple Computer: Your Apple must support USB with the built-in native
ports present. Standard iMacs or G3/G4s with USB ports will work just fine. A Mac OS that supports USB will also be required.We recommend OS 9.2.2 or higher.We cannot guarantee performance of device when using non-Apple USB ports.
IMPORTANT: For MacOS 9, an OMS MIDI driver is provided. You MUST have a sequencer program that supports OMS, and have OMS properly installed in order to use the Oxygen 8.

Whats in the Box

Included in your Oxygen 8, you should find:
1. 2. 3. 4. Oxygen 8 USB Keystation MIDI Controller One (1) standard USB cable PC and Mac driver disk Owners manual and warranty card

Guide to Getting Started

Heres an outline of steps to begin using your Oxygen 8 on either Mac or PC:
1. 2. 3. 4. Attach the Oxygen 8 to your computer (see Hardware Installation). Install the Driver (see Software Installation). Hook your sound module to the Oxygen 8 (see Setting Up Your MIDI Studio). Configure the Oxygen 8 in your application software (see Using the Oxygen 8 in your Application Software).

Hardware Installation

Installing your Oxygen 8 means simply attaching it to your USB port using the standard USB cable that is included. We recommend that you power down (turn off) your computer for a first time installation. If you are using the Oxygen 8 in USB mode, a power supply is not requiredthe computers USB port provides the power to run the Oxygen 8. The wall-wart or battery supply is only necessary for use in the standalone mode. However, when the Oxygen 8 receives its power from the USB port, we recommend either plugging directly into the computers USB port (not into the keyboards port or a powered USB hub.) Find a good spot around your computer station to place the Oxygen 8. The USB port on your computer is a small (1/8 x 3/8), rectangular connector (A) and is usually found in a group of two. The other end (B) of your USB cable is more square (1/4 x 1/4) in shape, and should fit easily into the USB connector on your Oxygen 8. Take the (A) end of the USB cable and plug it into the USB port on the back of your computer. Take the (B) end of the USB cable and plug it in to the USB port on the back panel of the Oxygen 8. Next,power up your computer and proceed to the next section,Software Installation.

Software Installation

MIDI application software communicates with devices such as the MIDI interface contained within the Oxygen 8 via software known as drivers. This software driver is a special, dedicated program that makes a MIDI interface accessible to an application. On the included driver disk, M-Audio supplies the drivers that enable you to use Oxygen 8 with either Windows, Mac OS9 or Mac OSX. Oxygen 8 drivers are supplied on the included dual format CD. USB Driver Installation for Windows This driver for the Oxygen 8 USB interface requires Windows 98 or higher. Please make sure that Windows 98SE, ME, 2000 or XP is installed on your system, and that your USB port is enabled. Check your computer manual for more information.
To verify your Windows installation after you have carefully followed these instructions, you may check your systems Device Manager, located in the Control Panel under System. If you look in the Device Manager, you will find 2 parts for the Oxygen 8 KEYSTATION driver; one under the Universal Serial Bus controller group and the other under the Sound, video, & game controllers group. Windows XP:
1 Insert the 'Oxygen 8' CD-ROM into your CD-ROM drive. 2. Open 'My Computer' or 'Windows Explorer' to locate your CD-ROM drive. Double-click the CD-ROM drive that contains the Oxygen 8 CD-ROM. Double-click the 'Oxygen 8' folder. 3. Double-click the driver icon to launch the installation procedure. 4. You will see an installer window advising you to have your Oxygen 8 DISCONNECTED from the USB bus before continuing.After you verify that your device is disconnected, click 'Next' to continue.
5. You will see a warning that this device has not passed Windows logo testing. Click "Continue anyway".
6. When the installer has completed installation, click Finish. Plug in your Oxygen 8.
7. You will see a New Hardware found dialog. (If you dont see this dialog at first, unplug your Oxygen 8 and try again.) Click Next.
8. You will see another warning that the product has not passed Windows logo testing. Click "Continue anyway".
9. The installer will finish. Click Finish to continue.

10. You will see another window telling you that New Hardware has been found. Click Next.
11. Again, the computer reminds you that the product has not passed Windows Logo testing. Click "Continue anyway".
12. The driver has been installed.
Windows XP Installation is now complete. Windows 2000
1. Service Pack 2 or higher is required for proper operation of the Oxygen 8 driver. This service pack is available from Microsoft Downloads at www.microsoft.com/downloads. 2. Insert the M-Audio Driver CD into your CD-ROM drive. Open 'My Computer' or 'Windows Explorer' to locate your CD-ROM drive. Doubleclick the CD-ROM drive that contains the Oxygen 8 CD-ROM. 3. Double-click the Oxygen 8 Folder to open it. 4. Double-click on the Oxygen 8 Installer icon 5. A dialog box will appear, reminding you to exit all currently running programs and to disconnect the Oxygen 8 from the USB port. Do this, and click Next to continue.
The installer will scan your hard drive (this can take some time) and will then install the necessary files and perform setup actions on your system.A series of progress bars will show you how the process is going.
6. At the next prompt, the installer will warn you that this product does not have a Windows Digital Signature. Click Yes to continue.
7. A dialog box will appear, stating that the installation has succeeded. Click Finish to complete the driver installation.
8. Plug the Oxygen 8 into your computers USB port. Be sure to either have the power supply connected and power switch set to 9V, or if not using power supply, be sure to set the power switch to USB Power. Upon doing so, the computer will find and install the necessary drivers. 9. The installer will warn you that this product does not have a Windows Digital Signature. Click Yes to continue.
10. The installer will warn you again, a second time, that this product does not have a Windows Digital Signature - again, click Yes.
11. The next screen informs you that the installer has completed. Click Finish to continue.
12. Windows 2000 will prompt you to restart the computer, in order to complete the installation. Click Yes to restart with new settings.
Windows 2000 Installation is now complete. Windows Me and Windows 98 Second Edition
1. Insert the M-Audio Driver CD into your CD-ROM drive. Open 'My Computer' or 'Windows Explorer' to locate your CD-ROM drive. Doubleclick the CD-ROM drive that contains the Oxygen 8 CD-ROM. 2. Double-click the Oxygen 8 Folder to open it. 3. Double-click on the Oxygen 8 Installer icon. 4. A dialog box will appear, reminding you to exit all currently running programs and to disconnect the Oxygen 8 from the USB port. Do these things and

click Next to continue.

5. A dialog box will appear, stating that the installation has succeeded. Click Finish to complete the driver installation.
6. Plug the Oxygen 8 MIDI interface into your USB port. Be sure to either have the power supply connected and power switch set to 9V, or if not using power supply, be sure to set the power switch to USB Power. Upon doing so, the computer will find and install the necessary drivers.
Windows Me or 98SE Installation is now complete. USB Driver Installation for Macintosh If you are using OS 9, you must first install Opcodes OMS. This is available on the MIDISPORT drivers page of our website, or can be installed from the driver CD by opening the OMS folder and then double clicking the OMS install icon that asks for the driver signature. This release version of the Oxygen 8 driver requires Macintosh operating
system OS 9.2.2 or higher. Some updates are offered free to Apple owners. Please check the Apple website at http://www.info.apple.com for update information. OMS is a MIDI manager program that is made by Opcode. We have included it on the CD disk for your convenience, and also offer it as a free download from our websites MIDISPORT drivers page. OMS is required to run the Oxygen 8 on the Macintosh in OS 9, and it is important that you install OMS before running the Oxygen 8 Installer. Locate the OMS installer program on this CD in the OMS 2.3.7 folder, and simply double click its icon to install OMS. Once this has been successfully completed, you can move on to the next step- the KEYSTATION Installer.
FOR FIRST TIME INSTALLS: If you power up your Mac with the Oxygen 8 attached and powered up (or with USB selected on the power switch), you will receive a message that an unknown USB device has been detected. Click OK, and proceed with the driver installation. You may also install the drivers first, and then plug in the Oxygen 8.
Mac OSX: The drivers for MacOS X are found on the Driver CD, which comes with the product. You may also wish to check the MIDISPORT drivers page of our website to make sure you have the most recent version. The driver may be labeled Keystation or MIDIMAN USB.The OSX Installer Package icon looks like a cube of Jello rising out of a cardboard box and usually ends with the suffix.pkg.
1. Double-click on the installer package. 2. Click on the lock icon and enter the administrator password you chose when you installed OSX. 3. Follow the prompts to install the software.

Mac OS 9: 1. Insert the Driver Software CD. Open the KEYSTATION folder, then the USB folder. There, you will find the KEYSTATION Installer program. 2. Run the KEYSTATION Installer by double clicking on it.This installs all of the KEYSTATIONs extensions as well as the KEYSTATION OMS Driver. However, YOU MUST HAVE OMS INSTALLED FIRST BEFORE YOU RUN THIS INSTALLER PROGRAM. Otherwise, the KEYSTATION OMS Driver will not be placed in the OMS folder. Once installed, you should have 2 files, one is in System Folder:Extensions (MIDIMAN USB MIDI Support) and the other is in System Folder: OMS Preferences (MIDIMAN USB OMS Support.) For more information, scroll through the Readme text which is presented on your screen during the installation process.
First Time OMS Configuration Instructions If you have installed the Oxygen 8 in Mac OS 9, it is now time to configure OMS (this is not necessary in Mac OS X). Go to the Chooser under the Apple Menu, and make sure AppleTalk is turned off (this is recommended, although OMS will sense that it is on and prompt you to turn it off). If you are installing your Oxygen 8s KEYSTATION driver and configuring OMS for the first time, follow these instructions to configure OMS.
1. In the Opcode folder, which you will find on your hard drive, locate the OMS Applications folder, then OMS Setup. Double click on OMS Setup. 2. OMS will inform you that it has not yet been configured. Click OK. 3. The Create A New Studio Setup dialog box now appears. Click OK. 4. The OMS Driver Search box asks you to choose the port on which youve attached the Oxygen 8 (either Modem or Printer). DO NOT choose a port (since were using USB), just click Search. OMS begins Searching.
IMPORTANT:If the USB cable is not correctly hooked up to the Oxygen 8,setup will fail.
5. OMS Driver Setup shows the Oxygen 8 KEYSTATION in a list when OMS successfully finds the driver. Click OK. OMS will now define (shows Identifying) the Oxygen 8 output port. 7. The OMS MIDI Device Setup dialog box will appear showing the Oxygen 8s output port (labeled KEYSTATION) with an open check box to the left of the port. You will now have to check this open box to enable the output port. Click on OK. 8. Next, the My Studio Setup appears with a file save dialog box over it. You will now need to name and save your new Studio Setup (or use the default name) before you can assign an instrument to the Oxygen 8s output (labeled KEYSTATION). Assign your instrument (this step is optional) and you are done.
You can run the OMS Test Studio utility by going to the Studio menu and releasing the mouse on Test Studio. Playing a note on your keyboard will give you an audio message from your computer, MIDI received, while the arrow pointing to the keyboard icon flashes. Clicking on the keyboard icon with the mouse pointer will send a tone cluster to the Oxygen 8 output port. The LED will light, and the sound module connected to the Oxygen 8 MIDI Out port should play the chord. You may now exit OMS Setup by quitting the application. The rest is up to the configuration within your music software. Generally, this means selecting OMS Compatibility, or Open Music System for your MIDI system setup.

Setting Up Your MIDI Studio
A typical MIDI system set-up would include your Oxygen 8, a computer, MIDI sequencing software and/or a MIDI compatible sound module. This type of set-up can be connected as follows:
1. The Oxygen 8 is connected to the computer via the USB port connectors, using the supplied USB standard cable. 2. The Oxygen 8 can play the synthesizer that is part of an internal sound card, as well as any software synthesizers that are installed in your system.This will depend on how you set up your software (see section Using the Oxygen 8 in your Application Software.) The audio output of the sound card can be plugged directly into a sound system, or into a mixer, which is then connected to a sound system. 3. The MIDI Output of the Oxygen 8 is connected to the MIDI In of a sound module. The audio output of the sound module can be plugged directly into a sound system, or into a mixer, which is then connected to a sound system.
In the following set-up, the Oxygen 8 is being used as a MIDI controller as well as a MIDI interface, inputting MIDI data to the computer and its application software, and outputting MIDI to a sound module from which sounds will be produced.The Oxygen 8 as a controller may also send MIDI information to an existing internal soundcards MIDI synthesizer or any installed software synthesizer, outputting the audio from the computer soundcard.
In this scenario, it may not be necessary to apply external power to the Oxygen 8.With the power switch set to Power Off, the Oxygen 8 receives power from the USB port on your computer. It is recommended that you either plug directly into the USB port on the computer, or use a powered USB hub.You may also choose to use power from batteries or an external power supply. Additionally, the Oxygen 8 may be used as a standalone keyboard controller, independent of the computer and its USB port. In this case, the Oxygen 8 must receive power from either a power supply or batteries, by switching the power setting on from the rear panel.Also, you will want to use the MIDI out port that is labeled Keyboard. A setup such as this may be used in a performance situation, or when you wish to use the keyboard without the computer.
Using the Oxygen 8 in your Application Software
Once the Oxygen 8 driver has been installed, you will need to configure your MIDI application software to utilize the Oxygen 8. The manner in which this is done varies between applications, so we can just cover the basics here. Generally with both the Mac and PC, most MIDI applications have a MIDI port configuration or settings dialog box, sometimes called MIDI Devices or MIDI Setup. It is within this dialog box that you will select or enable your MIDI input and output devices. If the Oxygen 8 drivers are properly installed, then the port selection in this case will be the KEYSTATION In-1 (or Port 1 on the Mac) in the input column, and then KEYSTATION Out-1 (or Port 1) in the output column. Input 1 (or Port 1), corresponds to the information that will be sent from the Oxygen 8 keyboard to your computer. Output 1 (or Port 1), corresponds to the MIDI information sent from your music application to the physical MIDI output on your Oxygen 8 that is marked USB. Make sure that those items are highlighted or checked.The output port that you select on a specific MIDI track within your sequence will output MIDI information to the keyboard or sound module that is attached to that port.

Oxygen 8 MIDI Functions

MIDI is the acronym for Musical Instrument Digital Interface, which makes all digital musical instruments equipped with this standardized interface able to exchange their MIDI data or talk to each other. To explain how MIDI works on your instrument in more detail, the following descriptions outline the MIDI functions of the Oxygen 8, which allow you to connect the keyboard to other MIDI instruments and to your computer. The versatile MIDI capability of the Oxygen 8 will offer you tremendous power in a MIDI environment. The keys on the Oxygen 8, in conjunction with the MIDI/SELECT button, give you the extra programming capability that is unique to the Keystation series of MIDI controllers.You can use the Data Entry key to enter in values, or the keys that are lableled with numbers.The keys labeled for specific MIDI functions can be used to assign that function to the data slider.The Set Ctrl key can be used with the numeric value keys to program the rotary faders to send MIDI controller information on specific MIDI channels.
MIDI Functions In Standalone Mode
To transmit MIDI data from your keyboard to other professional MIDI instruments, purchase a standard MIDI cable and use it to connect the MIDI OUT jack of your Oxygen 8 labeled Keyboard to the MIDI IN jack of the other instrument.
1. Power up the Oxygen 8, using either a 9vDC adapter or using 6 AA batteries. Set the power switch to the the 9V/Battery setting. If a 9V power adapter is present, the Oxygen 8 will use power from the adapter. If a 9V adapter is not present, and the Oxygen 8 has the required battery power, the unit will power up using the batteries. 2. Make sure that the MIDI port transmit channel within you music application matches the MIDI receive channel of the other instrument. 3. Please refer to the diagram in the section,Setting Up Your MIDI Studio for audio connections.
Default Settings of The Oxygen 8
The Oxygen 8 will always select the following values for their parameters when the power is turned on. Transmit MIDI Channel no. 1 Default Octave will be from C4(60) to C6(84) Default After Touch value will be 0 Default Velocity value will be 0 Default Reverb Depth value will be 64 Default Pan Pot value will be 64 Default Volume value will be 127 Default CC Data value will be 0 Default CC no. value will be 0 Default Control Change (CC-00=0, CC-32=0) message to be transmitted Default Program Change (PG=1) message to be transmitted Default MIDI-controller knob-assignments (10-17) on MIDI ch. 1

1. Press the MIDI/SELECT button. 2. Press the key labeled MIDI CHANNEL, on the keyboard. 3. Press the key labeled 2, on the keyboard, then press the key labeled Enter, also on the keyboard. Lastly, press the MIDI/SELECT button one more time (this will change the MIDI transmit channel from 1 to 2.)
Control Change data entry by numeric keypad: Oxygen 8 allows you to use the numeric keys, instead of the data entry slider, to specify the Control Change parameter data. This is done by pressing the MIDI/SELECT button, CC (No. or Data) key, required number key(s), and the Enter key.As an example, to assign a Control Change value of 7, and CC Data value of 123:
1. 2. 3. 4. 5. 6. 7. Press the MIDI/SELECT button. Press the CC No. key. Press the key labeled 7. Press the Enter key, in order to specify the Control Change as 7. Press the CC Data key. Press the number keys 1, 2 and 3, in order. Press the Enter key, to specify the value 123, then press the MIDI/SELECT button.This completes the process.
Program key: Pressing the MIDI/SELECT button and the Program key, then numeric keys, and finally the Enter key, you can select any patch number between 1 and 128. For example, if you want to change the voice to 67 (General MIDI TenorSax), Press the MIDI/SELECT button and 6, 7 on the numeric keys, then press the enter key and MIDI/SELECT button again to finish this action.
Please note: After you press the enter key, the LED display will show and will not disappear until you press the MIDI/SELECT button to finish your choice. After you press the Cancel key,, the LED display will also show blank, and will not disappear until you press the MIDI/SELECT button to finish your choice.

Rear Panel

1. Sustain jack: This jack allows you to connect an optional footswitch to the keyboard. When the footswitch is depressed, notes played on the keyboard will continuously sound as long as the footswitch is held, while MIDI controller information is sent from the Oxygen 8. 2. MIDI Out jack,Keyboard:This standard MIDI jack is a direct MIDI out from the keyboard in standalone mode, and is used to send MIDI messages to another MIDI instrument (such as sound module). 3. MIDI Out jack, USB: This standard MIDI jack receives its source from the computer when software is set to Oxygen 8 MIDI Out, and is used to send MIDI messages to another MIDI instrument (such as sound module). 4. USB port:This USB connector jack is used to connect the Oxygen 8 to the computers USB port using a standard USB cable (included). 5. Power switch:The 3-way power switch selects the keyboards power mode powered by USB connection, external power supply/battery power, or powered off. When set to USB Power the KEYSTATION receives power only after the computer is powered on.When the KEYSTATIONs power is turned on, the keyboard will reset to its default settings. 6. Power jack:This jack is used to connect the keyboard to an optional 9vDC, 500mA wall-wart type power supply.

Specifications

Model: Oxygen 8 Keyboard Type Simultaneous Output Control Switches 25 dynamic key 10 note (reverse priority) MIDI Channel Reset Octave -2, -1, center , +1, +2 Program Change CC-00/CC-32 (GS Bank Selection) CC-No. (Generic CC Assignment) CC-Data Data Entry Velocity Assignment Data Entry Reverb Send Level Assignment Data Entry Chorus Send Level Assignment Pan Pot Assignment (CC-10) Volume Assignment (CC-07) Numerical Keys (x 10) Enter Cancel Pitch Bender Wheel Modulation Wheel Data Entry Slider MIDI Out jacks (Kybd & Comptr - DIN) Sustain jack (1/4") USB port (to Comptr - pwr & MIDI) Power Select switch Power jack 7-segment LED (x 3) 42 x 23.7 x 7.62 (cm) 1.4 kg External supply (9VDC, 500ma) USB Battery (6 AA)

Rear Terminals

Display Type Dimensions Weight Power Source Options
Tested to comply with FCC Standards For Home or Studio Use
Technical Support & Contact Information
For additional technical assistance, contact M-Audio Technical Support by telephone (626-445-8495, 9-5 PST M-F), by fax (626-445-7564) or by e-mail (techsupt@m-audio.com). If you have questions, comments or suggestions about this product, or any M-Audio product, we invite you to contact us directly at:

M-AUDIO U.S.

45 E. Saint Joseph St. Arcadia, CA 91006-2861 U.S.A. Sales Information: 626-445-2842 Sales Information (email): info@m-audio.com Tech Support: 626-445-8495 Tech Support (email): techsupt@m-audio.com Fax: 626-445-7564 Internet Home Page: http://www.m-audio.com

M-AUDIO U.K.

Unit 5, Saracen Industrial Estate Mark Rd. Hemel Hempstead, Herts HP2 7BJ England Sales Information: 44 (0) 6590 Sales Information (email): info@maudio.co.uk Technical Support: 44 (0) 7102 Tech Support (email): richard@maudio.freeserve.co.uk Fax: 44 (0) 6832 Internet Home Page: http://www.maudio.co.uk

M-AUDIO Canada

1400 St-Jean Baptiste Ave., #150 Quebec City, QC G2E 5B7 Canada Tel: 418-872-0444 Fax: 418-872-0034 Email: midimancanada@m-audio.com Internet Home Page: http://www.m-audio.ca

M-AUDIO France

Unit 5, Saracen Industrial Estate Mark Rd. Hemel Hempstead, Herts HP2 7BJ England Sales Information: 105 Sales Information (email): info@m-audio-france.com Technical Support: 731 Tech Support (email): support@m-audio-france.com Fax: 44 (0) 6832 Internet Home Page: http://www.maudio.co.uk
M-AUDIO Deutschland (Germany)
Kuhallmand 34 D-74613 Ohringen Germany Sales Information: Sales Information (email): Technical Support: Technical Support (email): Fax: Internet Home Page: info@m-audio.de support@m-audio.de 70070 http://www.m-audio.de

M-AUDIO Japan

Annex Buliding 6F 2-18-10 Marunouchi Naka-Ku, Nagoya 460-0002 Japan Tel: Fax: Technical Support: Email: Internet Home Page: 731 info@m-audio.co.jp http://www.m-audio.co.jp

Appendix A-Midi Charts

MIDI Controllers:
Number 20-31 32-85-102-127 Definition Bank Select Modulation Wheel Breath Control Undefined Foot Controller Portamento Time Data Entry Channel Volume Balance Undefined Pan Expression Controller Effect Control 1 Effect Control 2 Undefined Undefined General Purpose Controller #1 General Purpose Controller #2 General Purpose Controller #3 General Purpose Controller #4 Undefined LSB Controllers (0~31) Damper Pedal on/off (sustain) Portamento on/off Sustenuto on/off Soft Pedal on/off Legato Footswitch Hold 2 Sound Controller 1 Sound Controller 2 (Resonance) Sound Controller 3 (Release Time) Sound Controller 4 (Attack Time) Sound Controller 5 (Cutoff) Sound Controller 6 (Decay Time) Sound Controller 7 (Vibrato Rate) Sound Controller 8 (Vibrato Depth) Sound Controller 9 (Vibrato Delay) Sound Controller 10 General Purpose Controller #5 General Purpose Controller #6 General Purpose Controller #7 General Purpose Controller #8 Portamento Control Undefined Effects 1 Depth (Reverb Send Level) Effects 2 Depth (Tremolo Depth) Effects 3 Depth (Chorus Send Level) Effects 4 Depth (Celeste Depth) Effects 5 Depth (Phaser Depth) Data Entry +1 Data Entry -1 Non-Registered Parameter Number LSB Non-Registered Parameter Number MSB Register Parameter Number LSB Register Parameter Number MSB Undefined All Sound Off Reset All Controllers Local Controller on/off All notes off Omni mode off (+ all notes off) Omni mode on (+all notes off) Monophonic Mode Polyphonic Mode Parameter 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 <63=off; >64=on <63=off; >64=on <63=off; >64=on <63=off; >64=on <63=off; >64=on 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 0-127 n/a n/a 0-127 0-127 0-127 0-127 ? 0=off; 127=on 0 0-16 0

MIDI Implementation:

Model: Oxygen 8 Version: 1.0 Function Transmitted Basic Channel Default Changed Mode Default Messages Altered Note Number True Voice Velocity Note ON Note OFF After Touch Keys Chs Pitch Bender Control Change Prog Change :True # :CC-00, :CC-32 System Exclusive System Common :Song Pos :Song Sel :Tune System Real Time :Clock :Commands Aux Message :Local ON/OFF :All Notes OFF :Active Sense :Reset Notes: 1 1-16 Mode 3 x ************* 12-108 ************* o x x x o o 1-128 ************ 0-127 x x x x x x x o o o Recognized x x x x x x x x x x x x x x x x x x x x x x x x x x

With Octave Change

Remarks

Send with Reset.

Send with Reset. o=Yes,x=No
Oxygen 8 Warranty Information
M-Audio warrants that this product is free of defects in materials and workmanship under normal conditions for 90 days, so long as the product is: owned by the original purchaser; the original purchaser has proof of purchase from an authorized M-Audio dealer; and the purchaser has registered his/her ownership of the product by sending in the completed warranty card. In the event that M-Audio receives written notice of defects in materials or workmanship from such an original purchaser, M-Audio will either replace the product, repair the product, or refund the purchase price at its option. In the event any repair is required, shipment to and from M-Audio and a nominal handling charge shall be born by the purchaser. In the event that repair is required, a Return Authorization number must be obtained from M-Audio.After this number is obtained, the unit should be shipped back to M-Audio in a protective package with a description of the problem and the Return Authorization clearly written on the package. In the event that M-Audio determines that the product requires repair because of user misuse or regular wear, it will assess a fair repair or replacement fee.The customer will have the option to pay this fee and have the unit repaired and returned, or not pay this fee and have the unit returned unrepaired. The remedy for breach of this limited warranty shall not include any other damages. M-Audio will not be liable for consequential, special, indirect, or similar damages or claims including loss of profit or any other commercial damage, even if its agents have been advised of the possibility of such damages, and in no event will M-Audio's liability for any damages to the purchaser or any other person exceed the price paid for the product, regardless of any form of the claim. MAudio specifically disclaims all other warranties, expressed or implied. Specifically, M-Audio makes no warranty that the product is fit for any particular purpose. This warranty shall be construed, interpreted, and governed by the laws of the state of California. If any provision of this warranty is found void, invalid or unenforceable, it will not affect the validity of the balance of the warranty, which shall remain valid and enforceable according to its terms. In the event any remedy hereunder is determined to have failed of its essential purpose, all limitations of liability and exclusion of damages set forth herein shall remain in full force and effect.