www.nokia.com/us www.latinoamerica.nokia.com
Printed in Mexico. Impreso en Mxico.
User Guide Manual del Usuario
62841cs_NOK_ENES85.indd 1

8/6/08 10:28:40 PM

DATE: CLIENT: STUDIO NUMBER: CONTACT/PHONE: COLORS: APPLICATION:
08-06-08 Nokia HH 62841 Ericka Garza 4c + PMS 293 InDesign CS3
FILENAME: JOB NAME: CLIENT NUMBER:
62841_NOK_ENES85.indd Master Brand 08 UG Covers for LTA
ELEMENT: BUILT SCALE: PRINT SCALE: PRINT CODE:

ADVERTISER:

Eng/Span 85 UG 100% 100%

179.525 mm x 105 mm

BLEED:

185.875 mm x 111.35 mm

SPECIAL: VERSION DSA

STUDIO ARTIST: PP

1 of 1
*Signing this position holds the signer(s) liable for any future change(s) not reflected on this proof. Any change(s) after this may result in additional charges. PROJECT MANAGEMENT ACCOUNT SERVIC E PRINT PRODUCTIO N

ROUND #1

*APPROVED TO LOAD

CREATIVE

*APPROVED TO LOAD WITH CHANGE S
DO NOT SIGN THIS SECTION UNLESS IT IS RE ADY TO RELEASE FOR PRODUCTIO N
BLACK YELLOW MAGENTA CYAN PANTONE 293 CV
62841cs_NOK_ENES85_1-1.pgs 08.06.2008 22:29

Nokia 1006 User Guide

Nota: La traduccin en espaol de este manual inicia en la pgina 39. 9211418 Issue 1 EN
2008 Nokia. All rights reserved. Nokia, Nokia Connecting People, and Navi are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Includes RSA BSAFE cryptographic or security protocol software from RSA Security. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE. The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer for details, and availability of language options.
Export controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. The third-party applications provided with your device may have been created and may be owned by persons or entities not affiliated with or related to Nokia. Nokia does not own the copyrights or intellectual property rights to the third-party applications. As such, Nokia does not take any responsibility for end-user support, functionality of the applications, or the information in the applications or these materials. Nokia does not provide any warranty for the third-party applications. BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS. FCC/INDUSTRY CANADA NOTICE Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the user's authority to operate this equipment. 9211418 / Issue 1 EN

Contents

SAFETY... 5 1. Get started... 9
Install and remove battery... 9 Charge the battery... 10 Switch your device on or off.... 11 Normal operating position... 12

2. Your device.. 13

Keys and parts.... 13 Standby mode and shortcuts.... 14

3. Main features... 15

Make and answer a call... Loudspeaker... Write text.... Messaging.... Contacts.... Voice recorder.... Voice tags.... Bluetooth..... USB data cable... 21
4. Enhancements... 22 5. Battery information... 23
Charging and discharging... 23 Nokia battery authentication guidelines... 25
Care and maintenance... 28 Additional safety information... 31 4

SAFETY

Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless devices may be susceptible to interference, which could affect performance.
SWITCH OFF IN RESTRICTED AREAS
Follow any restrictions. Switch the device off in aircraft, near medical equipment, fuel, chemicals, or blasting areas.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect incompatible products.

WATER-RESISTANCE

Your device is not water-resistant. Keep it dry.

About your device

The wireless device (RH-120) described in this guide is approved for use on CDMA 800, 1700, and 1900 MHz networks. Contact your service provider for more information about networks. When using the features in this device, obey all laws and respect local customs, privacy and legitimate rights of others, including copyrights. Copyright protection may prevent some images, music, and other content from being copied, modified, or transferred. Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger. Remember to make back-up copies or keep a written record of all important information stored in your device. Your device may have preinstalled bookmarks and links for thirdparty internet sites. You may also access other third-party sites 6
through your device. Third-party sites are not affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose to access such sites, you should take precautions for security or content. When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.

Network services

To use the phone you must have service from a wireless service provider. Many of the features require special network features. These features are not available on all networks; other networks may require that you make specific arrangements with your service provider before you can use the network services. Your service provider can give you instructions and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services. Your service provider may have requested that certain features be disabled or not activated in your device. If so, these features will not appear on your device menu. Your device may also have a special configuration such as changes in menu names, menu order, and icons. Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as browsing websites, and downloading files require network support for these technologies.

Nokia support on the web

For the latest guides, additional information, downloads, and services related to your Nokia product, see www.nokiausa.com/support or your local Nokia website.

1. Get started

Install and remove battery
Always switch the device off and disconnect the charger before removing the battery. 1. Insert your finger into the finger notch, and lift the back cover.
2. To install the battery, position the battery so the gold-colored contacts match up with those on the phone, and insert the battery into the battery slot. Push down on the other end of the battery.
3. To remove the battery, insert your finger into the finger notch and lift the battery from the battery slot.
4. Align the back cover with the back of the device from the top, progressively engage tabs from top to bottom, and push it to lock with the bottom end of the device until you hear a click.

Charge the battery

For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. Your battery has been precharged, but the charging levels may vary.
1. Connect the charger to a wall outlet. 2. Connect the charger to the device. You can use your device while it is charging. 3. When the battery is fully charged, disconnect the charger from the device, then from the wall outlet to save energy. If the battery is completely discharged, it may take a while before the charging indicator starts scrolling, or any calls can be made.
Switch your device on or off
Press and hold the power/end key for at least three seconds.
Normal operating position

Your device has an internal antenna. Use the device only in its normal operating position.
Note: Your device may have internal and external antennas. As with any radio transmitting device, avoid touching the antenna area unnecessarily while the antenna is transmitting or receiving. Contact with such an antenna affects the communication quality and may cause the device to operate at a higher power level than otherwise needed and may reduce the battery life.

2. Your device

Keys and parts
1. Strap eyelet 2. Earpiece 3. Middle selection key 4. Right selection key 5. Power/End key 6. Keypad 7. Call key 8. Charger/USB port 9. Left selection key 10. Navi key; hereafter referred to as scroll key 11. Volume key 12. Headset connector 13. Speaker
Standby mode and shortcuts
To lock the keypad, select Menu, and press within two seconds. To unlock the keypad, select Unlock, and press within two seconds. To access the list of dialed numbers, press the call key once. To switch between current profile and silent profile, press and hold for at least three seconds. To listen to your voice messages, press and hold 1 for at least three seconds.

3. Main features

Select Menu to access the following features: Messaging to create, send, open, and manage messages Contacts to save names and phone numbers in the phone memory, you can also assign groups, 1-touch dialing, and voice tags Log to access phone numbers of missed, received, and dialed calls Settings to set up various features of your device Gallery to view and save images, tones, and recordings to a folder Web to access mobile internet services with your phone browser Organizer to access alarm clock, calendar, to-do list, notes, calculator, countdown timer, stopwatch, and voice recorder Applications to download applications to your device Extras to play games and check local times of different cities around the world

Make and answer a call

To make a call, enter the phone number, including the country code and area code, if necessary, and press the call key. Press the volume key to adjust the volume of the earpiece or headset during the call. 15

To answer a call, press the call key. To end a call or to reject an incoming call, press the end key.

Loudspeaker

To use the loudspeaker of the device during a call, select Loudsp. To deactivate the loudspeaker, select Normal. When a headset is connected, select Heads. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

Write text

You can enter text using traditional or predictive text input. To change the text input method, and to switch between uppercase and lowercase, press. To display a list of special characters, press.

Traditional text input

Press a number key, 2-9, repeatedly until the desired character appears. To insert a space, press 0. To insert a number, press and hold the desired number key. Or press to switch to 123 mode.

Predictive text input

Predictive text input is based on a built-in dictionary when writing in English. Select Options > Prediction on. When using predictive text input, press each key once for each letter. The device suggests a matching word. If the displayed word is the one you want, press 0, and start writing the next word. If not, press repeatedly to view other word options. If ? is displayed after the word, the word is not in the dictionary. To add the word to the dictionary, select Spell, enter the word using traditional text input, and select Save.

Messaging

The message service can only be used when supported by your network or service provider. To send a text message: 1. Select Menu > Messaging > Text messages > Create message. 2. Enter the phone number, or select Add to retrieve a number from your contacts list. 3. Write the message. 4. Select Send. 17
To delete all messages in a folder, select Menu > Messaging > Text messages > Delete messages and the folder. Your device supports text messages beyond the limit for a single message. Longer messages are sent as two or more messages. Your service provider may charge accordingly. Characters with accents or other marks, and characters from some language options, take up more space, and limit the number of characters that can be sent in a single message.

Contacts

To search for a contact, select Menu > Contacts > Names, enter the first character(s) of the name, and scroll to the contact you want. To add or edit contact information, select Details. To add or delete contacts, select Options.

Voice recorder

To start recording, select Menu > Organizer > Voice recorder > the record button. To stop recording, select the stop button. The recordings are saved in the Recordings folder in Gallery. The recorder cannot be used when a data call or GPRS connection is active.

Voice tags

You can use voice tags to make a phone call or activate certain function with hands-free operations. Before using voice dialing or voice commands, you must first record a voice tag to the name saved in the contact list or certain feature. 1. To add a voice tag to a contact, select Menu > Contacts > Names > a contact > Details > Options > Add voice tag. 2. To add a voice tag to the phone function, select Menu > Settings > Voice commands, a function, and Add. 3. Select Start and speak the voice tag clearly into the microphone. To activate a voice dialing or voice command, press and hold the right selection key in standby mode. When Speak now is displayed, say the voice tag clearly into the microphone. If a match is not found, the message No match found is displayed. Before using voice tags, note the following: Voice tags are not language-dependent. They are dependent on the speaker's voice. You must say the name exactly as you said it when you recorded it. Voice tags are sensitive to background noise. Record voice tags and use them in a quiet environment. 19
Very short names are not accepted. Use long names, and avoid similar names for different numbers. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.

Bluetooth

This device is compliant with Bluetooth Specification 2.0+EDR supporting the following profiles: Generic access profile, Generic object exchange profile, Serial port profile, Object push profile, File transfer profile, Dial-up networking profile, Headset profile, Hands-free profile, Phonebook access profile, and Serial port profile. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device. To activate Bluetooth connectivity, select Menu > Settings > Connectivity > Bluetooth > Bluetooth > On. To connect to other devices, select Paired devices > New. Select the device, then Pair. To receive files from another device, select Accept. To send files to another device, select the file, Options > Send > Via Bluetooth, then the Bluetooth device. 20

Features using Bluetooth technology increase the demand on battery power and reduce the battery life. To avoid malicious software, do not accept Bluetooth connectivity from sources you do not trust. Switch off the Bluetooth function when not in use.

USB data cable

You can transfer data between your device and a compatible PC by using a CA-101 USB data cable. Important: To make a call, disconnect the USB data cable from the device. To ask for the purpose of the connection each time the cable is connected, select Menu > Settings > Connectivity > USB data cable > Ask on connect. To transfer phone data and files between your device and PC using Nokia PC Suite: 1. Connect your PC and your device with a CA-101 USB data cable. 2. Select PC Suite when asked to select the connection mode. You can now use PC Suite to connect to your device.

4. Enhancements

For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. Battery and charger Standard 860mAh Li-Ion Battery (BL-4C) Travel Charger (AC-6) Headset Headset (HS-9) Cable CA-101 (micro USB)

5. Battery information

Charging and discharging
Your device is powered by a rechargeable battery. The battery intended for use with this device is BL-4C. Nokia may make additional battery models available for this device. This device is intended for use when supplied with power from the following chargers: AC-6. The exact charger model number vary depending on the type of plug. The plug variant is identified by one of the following: E, EB, X, AR, U, A, C, or UB. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device. Use of an unapproved battery or charger may present a risk of fire, explosion, leakage, or other hazard. If a battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger, then disconnect and reconnect it to begin charging the battery. If the battery is completely discharged, it may take several minutes before the charging indicator appears on the display or before any calls can be made. 23
Always switch the device off and disconnect the charger before removing the battery. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. Always try to keep the battery between 15C and 25C (59F and 77F). Extreme temperatures reduce the capacity and lifetime of the battery. A device with a hot or cold battery may not work temporarily. Battery performance is particularly limited in temperatures well below freezing. Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.

Do not dismantle, cut, open, crush, bend, deform, puncture, or shred cells or batteries. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. In the event of such a leak, flush your skin or eyes immediately with water, or seek medical help. Do not modify, remanufacture, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids. Improper battery use may result in a fire, explosion, or other hazard. If the device or battery is dropped, especially on a hard surface, and you believe the battery has been damaged, take it to a service centre for inspection before continuing to use it. Use the battery only for its intended purpose. Never use any charger or battery that is damaged. Keep your battery out of the reach of small children.
Nokia battery authentication guidelines
Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from a Nokia authorized service center or dealer, and inspect the hologram label using the following steps:

Authenticate Hologram

1. When you look at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle.
2. When you angle the hologram left, right, down and up, you should see 1, 2, 3 and 4 dots on each side respectively.
Successful completion of the steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic, original Nokia battery, you should refrain from using it, and take it to the nearest Nokia authorized service center or dealer for assistance. If authenticity cannot be verified, return the battery to the place of purchase.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest Nokia authorized service center or dealer for assistance. The use of a battery that is not approved by Nokia may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device. For additional information, refer to the warranty and reference leaflet included with your Nokia device.

Care and maintenance

Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it. Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. Do not attempt to open the device other than as instructed in this guide. Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics. 28

Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. Do not paint the device. Paint can clog the moving parts and prevent proper operation. Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices. Use chargers indoors. Always create a backup of data you want to keep, such as contacts and calendar notes. To reset the device from time to time for optimum performance, power off the device and remove the battery. These suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.

Disposal

The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available. Do not dispose of these products as unsorted municipal waste. By returning the products to collection you help prevent uncontrolled waste disposal and promote the reuse of material resources. More detailed information is available from the product retailer, local waste authorities, national producer responsibility organizations, or your local Nokia representative. For the product Eco-Declaration or instructions for returning your obsolete product, go to country-specific information at www.nokia.com.
Additional safety information

Small children

Your device and its enhancements may contain small parts. Keep them out of the reach of small children.

Operating environment

This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimeters (7/8 inches) away from the body. When a carry case, belt clip, or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body. To transmit data files or messages, this device requires a quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed.

Medical devices

Operation of any radio transmitting equipment, including wireless devices, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer 31
of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Implanted medical devices
Manufacturers of medical devices recommend that a minimum separation of 15.3 centimeters (6 inches) should be maintained between a wireless device and an implanted medical device, such as a pacemaker or implanted cardioverter defibrillator, to avoid potential interference with the medical device. Persons who have such devices should: Always keep the wireless device more than 15.3 centimeters (6 inches) from the medical device when the wireless device is turned on. Not carry the wireless device in a breast pocket. Hold the wireless device to the ear opposite the medical device to minimize the potential for interference. Turn the wireless device off immediately if there is any reason to suspect that interference is taking place. Read and follow the directions from the manufacturer of their implanted medical device. 32
If you have any questions about using your wireless device with an implanted medical device, consult your health care provider.

Hearing aids

Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider. Warning: For hearing aid compatibility, you must turn off the Bluetooth connectivity. Your mobile device model complies with FCC rules governing hearing aid compatibility. These rules require an M3 microphone or higher value. The M-value, shown on the device box, refers to lower radio frequency (RF) emissions. A higher M-value generally indicates that a device model has a lower RF emissions level, which may improve the likelihood that the device will operate with certain hearing aids. Some hearing aids are more immune than others to interference. Please consult your hearing health professional to determine the M-rating of your hearing aid and whether your hearing aid will work with this device. This device includes a setting for direct connection to telecoilequipped hearing aids. When both the telecoil hearing aid (Tswitch) and the phone telecoil are activated, using the device with the aided ear will provide a direct connection for audio through your hearing aid. The quality of sound depends on the type of hearing aid used. You should test the device with the telecoil setting activated to determine whether your audio 33

performance improves. Using the telecoil hearing-aid setting consumes additional battery power. More information on accessibility can be found at www.nokiaaccessibility.com.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer, or its representative, of your vehicle or any equipment that has been added. Only qualified personnel should service the device or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If invehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. 34
Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.
Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere, and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include below deck on boats, chemical transfer or storage facilities and areas where the air contains chemicals or particles such as grain, dust, or metal powders. You should check with the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) to determine if this device can be safely used in their vicinity.

Emergency calls

Important: This device operates using radio signals, wireless networks, landline networks, and user-programmed functions. If your device supports calls over the internet (internet calls), activate both the internet calls and the cellular phone. The device will attempt to make emergency calls over both the cellular networks and through your internet call provider if both are activated. Connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies.
To make an emergency call
1. If the device is not on, switch it on. Check for adequate signal strength. Depending on your device, you may also need to complete the following: Insert a RUIM card if your device uses one. Remove certain call restriction you have activated in your device. Change your profile from offline or flight profile mode to an active profile. 2. Press the end key as many times as needed to clear the display and ready the device for calls. 36
3. Enter the official emergency number for your present location. Emergency numbers vary by location. 4. Press the call key. When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.
Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves. Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health. The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be below the maximum value because the device is designed to 37
use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 0.94 W/kg. Use of device accessories and enhancements may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band. Additional SAR information may be provided under product information at www.nokiausa.com. Your mobile device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA) and Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use at the ear is 1.5 W/kg and when properly worn on the body is 0.67 W/kg.

Nokia 1006 Data Sheet

Planned Market Introduction 1ST Quarter 2009 Key Features Smooth, ergonomic design Bluetooth 2.0 connectivity Compact size with curved back Voice recorder up to 90 seconds. Integrated hands-free speakerphone Preloaded applications Side volume and clear keys Other Features Brew 3.1.5 72-Polyphonic MIDI Ringtones 15 pre-loaded ringtones, 10 wallpaper, screensavers and 1 pre-loaded game Phonebook holds up to 500 contacts Calculator, alarm clock, stopwatch, calendar, and tip calculator HAC compliant (T3/M3) Standard Sales Package includes Nokia 1006 handset Battery: BL-4C (860mAh) Nokia charger AC-6U (Micro USB) Nokia 1006 user guide Technical Profile Frequency: CDMA 1X, 800/1900 MHz, 1700/2100 AWS Design: Ergonomic monoblock Dimensions: 108 x 44 x 13.5 mm Weight: Approx. 76 grams User Interface:Nokia Series 40 Display: 128 x 160, 262K TFT Display Memory: Internal: Up to 8MB Messaging: SMS with predictive text Connectivity: Bluetooth 2.0, 2.5 mm headset jack, Micro USB Battery: BL-4C (860mAh) Browsing: WAP Browser Talk Time: At least 3.5 hours Standby Time: At least 10 days Nokia Original Accessories Headsets: Chargers: Data: Colors Nokia HS-9 wired stereo headset Nokia AC-6U travel charger Nokia DC-6 car charger Micro-USB connectivity cable CA101 for charging from PC Blue Silver Red *Colors are based on market introduction Languages English and Spanish language packages
2008 Nokia. All rights reserved. Nokia and Nokia Connecting People are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or trade names of their respective owners. Specifications are subject to change without notice. The availability of particular products and services may vary by region. Operation times may vary depending on radio access technology used, operator network configuration and usage. Operations, services and some features may be dependent on the network and/or SIM card as well as on the compatibility of the devices used and the content formats supported. Some services are subject to a separate charge.