Panasonic Broadcast

AG-DV2500 Menu Information

MENU SCREEN

Top MENU screen
ME NU S Y S T EM. R E MO T E. AUD I O / V I DEO. T I ME COD E. D I SPLAY SET. C L OC K A D J U S T. F A C T OR Y S E T T I NG C A NC E L D R UM H O U R M E T E R H EX I T

Structure of the menu

SYSTEM menu screen
S Y S T EM S T I L L MO D E F I ELD S E R I E S R E C T I ME OF F S T I L L T I ME R 5M I N P A U S E P RO T E C T F. ADV ON I N D E X WR I T E D C I N MO D E P OW E R O F F P AGE B ACK
Hierarchical menus are displayed on the monitor.
REMOTE menu screen Normal screen

K CH 1 / 2 0m

R E MO T E L OC A L F UNC T I ON P R E RO L L R E M F F / R E W MO D E R EM S T OP S E L P L AY DE L AY S Y NCHRON I Z A T I ON CON T RO L L E R S E L P AGE B ACK
STP+EJ T 7 SEC F F / R EW EE OF ON TYPE3

10 / 10 / : 00 : 00

S T ANDB Y -OF F T CR : : : 0 0

AUDIO/VIDEO menu screen

AUD I O / V I DEO A U D I O MO D E 48K A. OU T A T S E A RCH OF F A UD I O OU T S E L CH - 1 / 2 A UD I O OU T L E V N O RM SET UP ( NTSC ) OF F P AGE B ACK

TIME CODE menu screen

TC CL EAR T I ME COD E 00 : 00 : 00 : 00 CANCE L DROP OF F OF F
ND F / D F ( N T SC ) DV T C DUP. T C OU T O F F S E T P AGE B ACK

DISPLAY menu screen

D I SPLAY D I SPLAY ON COUN T E R POS I. L OW E R - R T I ME COD E ON V T R MO D E ON T A P E R EMA I N OF F T I ME / D A T E OF F AUD I O I N FO. OF F DATE STY L E M/D/Y T I ME S T Y L E HOUR BARS OF F P AGE B ACK

CLOCK ADJUST menu screen

C L OC K A D J U S T DATE ( M / D / Y ) 10 / 10 / 02 T I ME 00 : 00 P AGE B ACK

Setting the menu

The various functions of this unit can be set from the menu. The configured settings are saved in the unit's memory and are maintained even after the power is turned off.

button

PLAY button

DISPLAY

EJECT button

SET button

MENU A.DUB DVCAM NTSC PAL REC INH. REC PLAY PAUSE

STILL MODE

AUDIO MUTING

PAUSE button

REW SET FF STOP

SEARCH+

MENU button

CH 2/4 AUDIO

OUT SEL. SET SEARCH OUT LEV.

S-VIDEO

FF button STOP button
The menu screen settings can be done while viewing the monitor connected to the VIDEO LINE OUT or S-VIDEO OUT terminal, using either the remote controller or the buttons on the main unit.
Set the unit to the STOP mode.
To perform setting with the operation buttons on the main unit, first remove the cassette if one is loaded. Top MENU
ME NU S Y S T EM. R E MO T E. AUD I O / V I DEO. T I ME COD E. D I SPLAY SET. C L OC K A D J U S T. F A C T OR Y S E T T I NG C A NC E L D R UM H O U R M E T E R H EX I T

Display the top MENU.

Remote controller Press the MENU button. Main unit Press the EJECT and STOP buttons simultaneously while no cassette is loaded. Main unit
Display the menu for setting.

Remote controller

Cursor

1 Press the / button and

SYSTEM menu bring the cursor to the item to be set. 2 Press the SET or button.
1 Press the PLAY/STOP button and bring the cursor to the menu item. 2 Press the PAUSE or FF button.
S Y S T EM S T I L L MO D E F I ELD S E R I E S R E C T I ME OF F S T I L L T I ME R 5M I N P A U S E P RO T E C T F. ADV ON I N D E X WR I T E D C I N MO D E P OW E R O F F P AGE B ACK
If the EXIT item of the top MENU is selected, the usual screen resumes. If the FACTORY SETTING item of the top MENU is set to EXECUTE, the set values on the menu will be reset to those initially set at manufacture. (Except DRUM HOUR METER) The DRUM HOUR METER item cannot be set.

VCR POWER

STILL MODE BLANK
MENU REC PLAY PAUSE DVCAM NTSC 1/3 PAL REC INH.

OUT SEL.

CH 2/4

SET SEARCH OUT LEV.

REW button

SYSTEM menu

Cursor Items Settings
Set the items on the menu.
Remote controller Main unit
bring the cursor to the item to be set. 2 Press the SET or button.

1 Press the PLAY/STOP button and bring the cursor to the item to be set. 2 Press the PAUSE or FF button.
The selected value blinks and becomes available for changing.
/ button to change the value as desired. 4 Press the SET button to confirm the value.

3 Press the

3 Press the PLAY/STOP but-
ton to change the value as desired. 4 Press the PAUSE button to confirm the value. The value stops blinking and is confirmed.
5 Repeat steps 1 - 4 above and perform the necessary settings.
To return to the previous screen, do either of the following:
Remote controller Press the button. Or Select PAGE BACK.
Main unit Press the REW button. Or Select PAGE BACK.

Top MENU

To return to the usual screen, do either of the following:
Remote controller Press the MENU button. Or Select EXIT from the top MENU. Main unit Press the EJECT button. Or Select EXIT from the top MENU.
Items SYSTEM REMOTE AUDIO/VIDEO TIME CODE DISPLAY SET Setting

Contents of the menus

In the menu descriptions below, settings with marks are factory settings.
Contents Displays the menus related to the operation system of this unit. Displays the menus related to the remote controller. Displays the menus related to the audio and video. Displays the menu for setting time codes. Displays the menu related to the displays on the monitor connected to the VIDEO LINE OUT or S-VIDEO OUT terminal. Displays the menu for setting date/time. For information on the setting method, please refer to page 30 Setting date/time.

CLOCK ADJUST

FACTORY SETTING

CANCEL EXECUTE

Sets whether to return the values on the menu to those initially set at manufacture: CANCEL : Do not use the factory settings EXECUTE : Use the factory settings Displays the drum usage time. *The cursor cannot be moved to this item. Return to the usual screen.

DRUM HOUR METER EXIT

SYSTEM menu

Setting

FIELD 1st 2nd FRAME

Contents

Use this item to select the still image type during the STILL mode or frame advance playback: FIELD : Displays field image. During frame advance playback, 1st and 2nd field images are displayed alternately. 1st : displays the 1st field image. 2nd : displays the 2nd field image. FRAME : displays the frame image. Memo The image type for the STILL mode can also be selected with the STILL MODE button on the wireless remote controller.

SERIES REC TIME

OFF 25MIN 55MIN 75MIN 115MIN 175MIN 265MIN
Set this item according to the recording time of the source tape during DV signal input series recording: OFF : No series recording. 25MIN : Use this setting if the recording time of the source tape is 30 mins. 55MIN : Use this setting if the recording time of the source tape is 60 mins. 75MIN : Use this setting if the recording time of the source tape is 80 mins. 115MIN : Use this setting if the recording time of the source tape is 120 mins. 175MIN : Use this setting if the recording time of the source tape is 180 mins. 265MIN : Use this setting if the recording time of the source tape is 270 mins. ( Page 38 Series recording function) Sets the interval after the lapse of which the tape protection mode will be engaged during an extended STILL mode. The setting for the STILL mode can be done via the PAUSE PROTECT menu item. 30SEC: 30 seconds 1MIN : 1 minute 3MIN : 3 minutes 2MIN : 2 minutes 5MIN : 5 minutes Memo To prevent damage, please set as short a time interval as possible.

STILL TIMER

30SEC 1MIN 2MIN 3MIN 5MIN

PAUSE PROTECT

F.ADV STBY-OFF
Sets the action to be taken when the unit has been left in the STILL mode for an extended period of time. In the case of a recording pause, the unit will go into the STOP state to protect the tape, regardless of the setting. : It advances in the forward direction. On the 6th advanceF.ADV ment, it goes into the STOP state. STBY-OFF : Goes into the STOP state. Selects whether to record the index signals during recording which is engaged after the STOP or recording PAUSE mode. OFF : No recording of index signal. ON : Use this setting to record index signals. An index signal is automatically registered at the position where recording starts. Select the action to perform when power is supplied via the DC IN terminal: POWER OFF : Sets the unit to POWER OFF. POWER ON : Sets the unit to POWER ON. PLAY : If a tape has been inserted, the VTR will go into the PLAY mode. (AUTO PLAY) Return to the top MENU

INDEX WRITE

OFF ON

DC IN MODE

POWER OFF POWER ON PLAY

PAGE BACK

REMOTE menu

REMOTE menu

LOCAL FUNCTION

(continued)

NO KEY EJECT STP + EJT ALL KEYS
Use this to select the buttons on the main unit to be rendered operable when remote controlling the unit via the 9 PIN REMOTE terminal: NO KEY : No button enabled. EJECT : Only the EJECT button enabled. STP + EJT : Only the STOP button and the EJECT button are enabled. ALL KEYS : All operation buttons are enabled. When remote controlling the unit via the 9 PIN REMOTE terminal, use this item to set the PREROLL time of the unit. Configurations done via the editing remote controller prevail over other settings: 3SEC : 3 seconds 5SEC : 5 seconds 7SEC : 7 seconds 10SEC : 10 seconds Memo To enhance editing precision, please set it to at least 7 seconds. Use this menu item to set the action to be performed when an FF/REW command is received via the 9 PIN REMOTE terminal or DV terminal: FF/REW : Sets the unit to execute FF/REW when a command is received. This is the usual setting. SEARCH : Sets the unit to go into the SEARCH state when a command is received. Use this setting if the locate(cue up) function does not work well. Use this menu item to set the action to be performed when a STANDBY ON command is received via the 9 PIN REMOTE terminal or DV terminal: EE: Sets the unit to the EE mode. (The unit will go into the STOP mode.) PB: Sets the unit to the PLAY mode. (The unit will go into the STILL mode.) Use this menu item to adjust the edit timing. When the remote controller is used, there will be a slight delay time before edit starts. To rectify the time discrepancy, adjust the timing for starting playback: 0F : No compensation. 1F to 15F : Delay by the number of frames set by the user. When this unit is connected to an editing remote controller with no BUMP (synchronization) function, use this setting to adjust the editing precision. Use this setting to turn on/off the BUMP function when the unit is connected to an editing remote controller: OFF : No synchronization. ON : Execute synchronization. The editing precision is enhanced. Please set the pre-roll time to at least 7 seconds. When remote control is executed via the RS-422A interface, use this menu item to set the type of controller connected: TYPE1 : Remote controller not of PANASONIC TYPE2 : Remote controller not of PANASONIC TYPE3 : AG-A850, AJ-A95 TYPE4 : Remote controller not of PANASONIC TYPE5 - TYPE7 : (not in use)

PREROLL

3SEC 5SEC 7SEC 10SE

REM FF/REW MODE

FF/REW SEARCH

REM STOP SEL

EE PB

PLAY DELAY

0F | 15F

SYNCHRONIZATION

CONTROLLER SEL
TYPE1 TYPE2 TYPE3 TYPE4 TYPE5 TYPE6 TYPE7

AUDIO/VIDEO menu

Items AUDIO MODE Setting 48K 32K Contents Select the audio sampling frequency for recording: 48K : Records at 48kHz. It records in the 2-channel stereo mode. No audio dubbing. 32K : Records at 32kHz. It records in the 4-channel mode. To perform audio dubbing on CH3 and CH4 later, use this setting. Memo This setting is not required for DV signal input. Use this menu item to enable/disable audio output from the AUDIO OUT terminal during a search: OFF : No output. ON : Output. Use this menu item to select the audio channel output from the AUDIO OUT terminal when playing back tapes recorded in the 32K mode: CH-1/2 : Outputs CH1 and CH2 audio. MIX : Outputs mixed audio of CH1 and CH3 and mixed audio of CH2 and CH4. CH-3/4 : Outputs CH3 and CH4 audio. Memo This setting can also be selected from the AUDIO OUT SEL. button on the wireless remote controller. Use this menu item to select the standard level for audio playback output: : Attenuates the output level to about 8dB. Use this setting ATT when playing tapes recorded on a VTR of which the standard level for PCM audio is full scale -12dB. The playback level is decreased by 8dB. NORM : Usually, this is selected. Memo This setting can also be selected with the AUDIO OUT LEV. button on the wireless remote controller. During recording OFF : Select this when analog signals are input without setup. ON : Select this when analog signals are input with setup. During playback OFF : Setup is not applied to analog video signals (composite, S-VIDEO) ON : Setup is applied to analog video signals (composite, S-VIDEO) Memo If dubbing is repeatedly done with the settings of the playback or recording video signals differing from the setting here, the hue and brightness of the video may turn out abnormal. A high level of knowledge pertaining to video signals is necessary to set this menu. Generally, for DV camcorders, SETUP is recorded on the tape as part of the video signals. Accordingly, SETUP is normally set to OFF. To use SETUP correctly, switch the setting according to the video signals being used. Return to the top MENU. E-57

A.OUT AT SEARCH

OFF ON

AUDIO OUT SEL

CH-1/2 MIX CH-3/4
When it is set to the MIX mode, noise may be produced. If this occurs, please set it to CH-1/2 or CH-3/4. AUDIO OUT LEV ATT NORM

SET UP (NTSC)

TIME CODE menu
Items TC CLEAR CANCEL EXECUTE NON DROP DROP Setting
Contents of the menus (continued)
Contents Presets the time code: For details, please refer to Page 35 "Setting Time Codes". Use this menu item to choose whether to clear the time code values: CANCEL : Do not clear. EXECUTE : clear. Select the framing mode for the time code generator: NON DROP : Sets the unit to the non-drop mode. Use this set ting when the number of frames of the time code is important. DROP : Sets the unit to the drop-frame mode. Use this set ting for real-time based time codes. Use this menu item to select the type of time code to be recorded for DV signal input: OFF : Records the time codes of the built-in time code generator of the main unit. ON : Records the time codes and user-bits input to the DV IN terminal. The time code framing mode automatically takes on that of the input time code. Use this menu item to set the timing to output time codes from the 9PIN remote terminal of the main unit to the editing remote controller: OFF : Usually, this is selected. +1F : Sets the timing to 1 frame faster. +2F : Sets the timing to 2 frames faster. 2F : Sets the timing to 2 frames slower. 1F : Sets the timing to 1 frame slower. Return to the top MENU.

NDF/DF (NTSC)

DV TC DUP.

TC OUT OFFSET

OFF +1F +2F 2F 1F

DISPLAY menu

DISPLAY menu
Items DISPLAY Setting OFF ON AUTO Contents Use this menu item to choose whether to have the characters of the status screen displayed on the monitor connected to VIDEO LINE OUT or S-VIDEO OUT terminal: OFF : No on-screen display. Video display only. ON : Always provide on-screen display. AUTO : Provide on-screen display for about 4 seconds on switching modes. Memo This setting can also be selected from the DISPLAY button of the wireless remote controller. Use this menu item to select the position on the monitor for time code display: LOWER-R : Lower right LOWER-L : Lower left UPPER-R : Upper right UPPER-L : Upper left CENTER : Center Use this menu item to turn on/off the display of time codes on the monitor: OFF : No display ON : Display Use this menu item to turn on/off the display of the VTR mode on the monitor: OFF : No display ON : Display Use this menu item to turn on/off the display of remaining tape on the monitor: OFF : No display ON : Display Use this menu item to turn on/off the date/time display on the monitor and to select the display format: OFF : No display of date/time. TIME : Display the time only. DATE : Display the date only. DATE +TM : Display the date/time.

COUNTER POSI. LOWER-R LOWER-L UPPER-R UPPER-L CENTER

TIME CODE

VTR MODE

TAPE REMAIN

TIME/DATE

OFF TIME DATE DATE +TM

Items AUDIO INFO. Setting OFF ON

DISPLAY menu (continued)

Contents Use this setting to turn on/off the display of audio channel or sampling frequency on the monitor: OFF : No display ON : Display Select the date format: Y/M/D : Display year/month/day. M/D/Y : Display month/day/year. D/M/Y : Display day/month/year. Select the time format: 24HOUR : Display in the 24-hour mode. 12HOUR : Display in the 12-hour mode. Use this menu item to choose whether to output, as test signals, color bar signals from the built-in signal generator: OFF : No output ON : Output Memo This color bar cannot be used as the standard signal for hue calibration. This setting can also be selected from the BARS button on the wireless remote controller. During DV signal input, the color bar will not be output even if this item is set to ON. Return to the top MENU.

DATE STYLE

Y/M/D M/D/Y D/M/Y

TIME STYLE

24HOUR 12HOUR

Panasonic Broadcast AG-DV2500 Mechanical Parts

CONTENTS

SERVICING FIXTURES & TOOLS MECHANISM PARTS ASSEMBLY...PRT-1 CABINET PARTS ASSEMBLY....PRT-3 PACKING PARTS ASSEMBLY....PRT-5
SERVICING FIXTURES & TOOLS

MECHANISM PARTS ASSEMBLY

S47D 47F 66B 47A 47B 47C S5 Red marking 90 S5 Apply the screw lock 31 S4
MECHA CONN BOARD ASSEMBLY 1 4
4A S4B 4C 45 S12 Apply the screw lock WS4

67B 67A S7 S6 S4

1. 1. 2.

Apply the screw lock

68 5A S4 5B

28 SS4

39 W30 W5

S4 WW2

No. 7 , 40 to shaft of No.24 WW6 S5 37

Fold W1

58 W59 S4

No. 11

No. 12

48 S8 54

AA CC CC

3. 8. 1. 4. 5.

Bottom side

MECHA BOARD ASSEMBLY 1 3

43 No. 54 No. 55

Ref.No.

4A 4B 4C 5 5A 5B 47 47A 47B 47C 47D 47E 47F 64

Part No.

LL30247-001A LL20081-001A WJT0085-001A LL40370-001A LL40357-001A LL40313-001A LY40382-001A LL40371-001A LY41249-001A
Part Name & Description
MECHANISM ASS'Y TAPE GUARD WIRE P.ARM F.ASS'Y TEN.SPRING(P.A) PINCH ROLLER P.ROLLER CAP H.CLEANER ASS'Y HEAD CLEANER SA

Remarks

66A 66B 67 67A 67B 90 90A 91
QSD0006-001 LL30275-001A LL30277-001A LL40284-001A LL30278-001A LL30280-001A LL40284-001A LL40292-001A LL40324-001A LL30306-001A YDV2103A LL20064-001A WJM0311-001A LL20063-001B
DEW SENSOR SUP P.BASE ASSY SUP P.B.PLATE G.ROLLER ASS'Y TU P.BASE ASS'Y TU P.B.PLATE G.ROLLER ASS'Y E.G.R.ARM ASS'Y M.C.B.PIN ASS'Y LEAF PLATE DRUM ASSEMBLY C.HOUSING ASS'Y WIRE MAIN DECK ASS'Y
QYWDM0802725 SLIT WASHER LL40341-001A LL30257-001A LN59 LL20071-001A LL30254-001A LL30260-001B LL20072-001A LL40241-001A LL30258-001A LL40352-001A LL30259-001A LL30262-001A NAL0015-001 CPT-230 NAL0016-001 LL30255-001A LL40351-001A QAR0247-001 WJT0084-001A LL30256-001B LL30263-001A LL40259-001B LL40362-001A LL40325-001A LL40326-001A LL40327-001A LL30265-001B LL40353-001A LL30281-001A LL30284-001A LL40261-001A LL40293-001A LL40300-001A LL40345-001A LL30272-001A LL40354-001A LL30303-001A LL40242-001A LL40243-001A LL40244-001A LL40245-001A LL10068-001A LL40246-001A WJM0310-001A GUIDE SHEET LED HOLDER L.E.D. CTL.PLATE M.SENSOR GEAR ARM GEAR MAIN CAM P.CAM GEAR SUP REEL LOCK TEN.SPRING(R.L) TU REEL LOCK PINCH PLATE FPC 2 ASSEMBLY PH.TRANSISTOR FPC 3 ASSEMBLY F.LOCK LEVER TEN.SPRING(FLL) REEL MOTOR FFC SW LEVER SUP TEN.ARM SA. TEN.SPRING(STA) COMP.SPRING GUIDE ROLLER COLLAR FLANGE TU TEN.ARM SA. TEN.SPRING(TTA) SUP R.DISK ASSY TU R.DISK ASS'Y CONN.GEAR ASS'Y SUP T.BAND ASSY TU T.BAND ASS'Y IDLER ARM ASS'Y EMERGENCY GEAR COMP.SPRING(E.G) MIC GUIDE GEAR 1 GEAR 2 WORM WHEEL 2 M.MOTOR ASS'Y MOTOR BRACKET MODE MOTOR SA WIRE

S1 S2 S3 S4 S5 S6 S7 S8

QYSPSPU1735N SCREW QYSDSG2004N SCREW
QYSPSPU1430M SCREW QYSPSPU1725M SCREW QYSDSP2005Z QYSDSP2003Z YQ43893 QYSDSP2012Z SCREW SCREW SCREW SCREW

W1 W2 W5 W6 W7 W8

QYWDL163525 QYWDM254725 QYWDM082525 QYWFM123025 QYWDM082025 QYWDM123025
SLIT WASHER SLIT WASHER SLIT WASHER WASHER SLIT WASHER SLIT WASHER
QYSPSPL2003Z SCREW LL40248-001A LL40252-001A LL20087-001A NAL0014-001A CNB1001001V1 QNZ0586-001 LL10067-001B LL40356-001A LL40316-001A LL40319-001A LL40368-001A LL20076-001A LL40273-001A LL30273-001A LL40277-001A LL40278-001A LL30274-001A LL40282-001A QAR0248-001 WORM ASSEMBLY E.GEAR(MODE) CA.GUIDE ASS'Y FPC 1 ASSEMBLY I.C.(PH SENSOR) M.I.C.CONNECTOR IDLE COVER TORSION SPRING S.R.PLATE ASS'Y T.R.PLATE ASS'Y CTL.ARM ASS'Y SUB DECK ASS'Y TU L.ARM ASS'Y TU L.GEAR T.SPRING(T.L.G) SUP L.ARM ASS'Y SUP L.GEAR T.SPRING(S.L.G) CAPSTAN MOTOR

CABINET PARTS ASSEMBLY

A=B A Electrode surface Plate Note) Valley fold
Components identified with the mark have the special characteristics for safety. When replacing any of these components, use only the same type.
B DV/CPU BOARD ASSEMBLY 1 1

CN 103 CN

S9 S10 c 13 13B 13C SS8 S1 e f 24 31

CN 104

From Head cleaner
From From Mode Motor Drum 21

S34 11

DV CONN BOARD ASSEMBLY 0 3

MECHANISM ASSEMBLY M 3

CN 105
MDA/DC BOARD ASSEMBLY 1 2
g 13C 13B 13C 13B SS1 S4 S9 S39 d S47 S1 SSS1

MIC BOARD ASSEMBLY 0 4

41 13B

CN 116

18 W1 S1 S1

S1 g 21

a 13D 13A f

28 S12

CN CN 400 3

CN 100

DRAWING FROM DIRECTION B

CN 400 1

FRONT BOARD

FRONT BKT 4

MAIN BOARD ASSEMBLY 0 1

FFC 23

MAIN BOARD

20 c S1 b 35

DRAWING FROM DIRECTION A

Electrode surface

Note) T mount the FFC, do the following. o 1) Insert the bent end of FFC 23 , which has already been bent once so it can now be bent easily, underneath FRONT BKT 4. 2) Insert the other end of FFC 23 into the space on the MAIN BOARD to stabilize the position of FFC.

Plate 90 a=b b

FRONT BOARD ASSEMBLY 0 2

35-45mm

Note) Valley fold Electrode surface
Note) Valley fold Electrode surface 35-45mm
13A 13B 13C 13D 22 23,47 48
LL30318-001A LL20089-001A LL20090-001A LL30319-001A LL40366-001A LL40363-001A LL20092-003A LL20092-004A LL40390-003A SS45331 LL30338-011A PGS30680C LL10078-002A LL20093-003A LL30343-001B LL30344-002A LL20091-003A LL40364-001A SS45014-002 SC45456-001 JN039-033601 WJJ0377-001A JN027-063211 UQ105-4512AA UQ105-3013AA SCV2949-038 LL30314-001D LL30315-001C LL30316-001A LL30317-001A PRD30030-36 LL40377-001A UQ105-1305AA UQ105-2609AA UQ105-2004AA UQ105-1804AA UQ105-2004AA JJ027-081203 IEEE1394ID LL40398-001A LL40399-001A LL40400-001A LL30353-001A PRD30030-164 PRD30030-147 LL30354-001A LL40401-001A

CENTER BRACKET SIDE FRAME (L) SIDE FRAME (R) FRONT BRACKET BRACKET KNOB BOTTOM COVER TOP COVER CAUTION LABEL FOOT RATING LABEL F.PANEL ASS'Y FRONT PANEL KNOB(OPE) INDICATOR SHEET REAR COVER BRACKET WIRE CLAMP CAUTION LABEL WIRE WIRE WIRE FFC WIRE FFC WIRE GASKET BRACKET (L) BRACKET (R) SUB BRACKET(L) SUB BRACKET(R) PAD SHIELD CASE FFC WIRE FFC WIRE FFC WIRE FFC WIRE FFC WIRE WIRE LABEL SHEET(1) SHEET(2) SHEET INSULATOR PAD(SLIDE KNOB) PAD(DV TERMINAL) GUARD SHEET LABEL(CAUTION)
S1 S2 S3 S4 S5 S8 S9 S10 S11 S12

PRD44050-02

SCREW(MIC/DVCONN)
QYSDSTY3008X SCREW PGZ01821 QYSDSF3008Z LL40389-001A QYSPSP3003Z PRD44099 QYSDSP2004Z SCREW SCREW SCREW SCREW SCREW SCREW
QYSPSPM2003Z SCREW QYSDSP2004Z SCREW

QYWLS275306N WASHER

PACKING PARTS ASSEMBLY
LLT029-001A LLT030-001A QPB02403404 LL10073-001A SS45331 LL40373-001A QPA01502005 PE260-200-K2 PL240-200-K2 QPB02002804 QAL0481-001 QPA01202005 PUP40003-7 LL30345-001A LL30322-001A LL20094-001A LL20096-001A QPA02503505 PRD3134-33 PRD3134-34 PRD3134-35 PRD3134-36 PP160-200-K
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS POLYETHYLENE BAG STAND FOOT PAD POLYETHYLENE BAG POWER CODE POWER CODE POLYETHYLENE BAG AC ADAPTER POLYETHYLENE BAG CUSHION REMOCON UNIT PACKING CASE CUSHION ACC. CASE POLYETHYLENE BAG PACKING LABEL PACKING LABEL PACKING LABEL PACKING LABEL POWER CODE
1 FOR AG-DV2500P 1 FOR AG-DV2500E FOR AG-DV2500P 1 FOR AG-DV2500E FOR AG-DV2500P 1 FOR AG-DV2500P 1 FOR AG-DV2500E 1 FOR AG-DV2500E 1 FOR AG-DV2500E