ML-1610
Design and Specifications are subject to change without notice. Trademarks of other companies mentioned in these publications are hereby recognized and acknowledged.
Speed * Resolution First Print Out Time
Up to 16 ppm in A4 (17 ppm in Letter) Up to 600 x 600 dpi output 10 seconds Samsung 150 MHz 2 MB SPL (Samsung Printer Language) USB 1.1 (Compatible With USB 2.0) Windows Fonts Windows 98 / Me / 2000 / XP, Various Linux OS including Red Hat, Caldera, Debian, Mandrake, Slackware, SuSE and Turbo Linux

Controller

Processor Memory Emulation Interface Fonts OS Compatibility
Paper Handling Input Capacity and Types Output Capacity and Types (75g/m2)

Media Size Special Media

150-sheet Multi Purpose Tray 50-sheet Face Down 76 x 127 mm (3" x 5") ~ 216 x 356 mm (8.5" x 14") Transparencies, Labels, Post cards, Envelopes 358 x 299 x 217 mm (14.1" x 11.8" x 8.5") 5.5 Kg (12.1lbs) Less than 50 dBA (Printing), Less than 35 dBA (Standby) Single Cartridge 2,000 Pages @ ISO 19752 5% Coverage (starter : 1,000 pages ) ML-1610D2

General

Dimension (W x D x H) Weight Noise Level **

Consumables

Type Yield Model Code
Please visit www.samsungprinter.com to download the latest software version. * Print speed will be affected by Operating System used, computing performance, application software, connecting method, media type, media size and job complexity. ** Sound Pressure Level, ISO7779

Compact & Stylish

Professional Output

Distributed by

Professional Desktop Printing at an Economical Cost

www.samsungprinter.com

2005. 4
Samsung Laser Printer ML-1610
Hassel-free desktop printing with high-quality, professional output at an economical cost. Samsung Laser Printer ML-1610.
The new Samsung ML-1610 monochrome laser printer packs professional quality printing into a stylish
compact printer. Suitable for any small office or corporate setting; it gives you top-rated performance, easy-to-use features and Samsungs stunning signature design.

358mm (14. 1)

Compact Design
Samsung ML-1610 is ergonomically designed to complement any modern business or home office with its compact size and attractive, modern style. Compact and stylish : Designed with a small footprint, the Samsung ML1610 fits neatly on any desk or shelf, freeing up valuable work space. Simple to use : Toner and paper replacement couldnt be simpler with easy front access panels.
Instant Installation : Requires only 4 clicks to install, and there is no need to re-start your PC once installed. Easy Job Control : One-button print job cancellation & re-printing helps you correct even volume printing with ease. USB Interface : Connects via fast USB 1.1 (compatible with USB 2.0) interface to prevent bottlenecks between your PC and printer.
Compatible : Windows and various Linux OS supported

Outstanding Performance

Inside its optimal compact case, Samsung ML-1610 has everything it needs to produce superb printing at an efficient speed. Fast Speed : Fast printing of up to 16 pages per minute (A4) with a 150 MHz processor for immediate first page out. High-quality Output : Sharp text & crisp graphics at 600 x 600 dpi resolution for professional documents. Versatile Paper Handling : 150-sheet input tray with convenient cover keeps paper neat and your desk attractive. Print transparencies, labels, cardstock and envelopes with the same versatile tray.

Economical Solutions

Samsung ML-1610 is competitively priced, but also includes built-in features designed to save you money. Toner-save button : One-touch configuration allows you to save up to 40% of toner, while still producing high quality prints, so you will replace your cartridges less frequently. Save paper : Printing options let you save paper by printing 2-up, 4-up, even up to 16-up on one page. Large toner capacity : High-capacity 2,000-page yield toner cartridge can meet even large business printing needs. (ships with a 1,000-page toner cartridge to get you started immediately)
Paper handling : Large 150-sheet multi-purpose tray Fast print speed : Up to 16 pages per minute (A4) Weight : Ultra-light, only 5.5kg
Economical : One-touch 40% toner save button
Samsung stands alone at the top in Reliability Ratings (actual survey data shown in tables)
Among laser printer brands, Samsung does best Highly satisfied with the reliability Significantly better than average

Advanced Productivity

You can take full advantage of Samsungs unique features to save time and increase productivity.

RELIABILITY MEASURES

COMPANY
An intelligent and stylish way to manage your communication needs. Samsung helps you to create professional publications using innovative superiority and real-life technology.
Problems on Any problems arrival

Severe problems

Products ease of use
Satisfaction with reliability
Overoll mean Canon Samsung HP Epson Okidata
Cited from 04 PC World (USA) annual reader survey results
Cited from 03 PC World (USA) annual reader survey results
Cited from 03 PC Magazine (USA) annual survey results

29 9m m

Complete Compatibility : Supports a wide range of operating systems, including Windows and various Linux OS.
Small : Compact size fits any desktop

(11.8 )

217mm (8.5)

SUMMIT TECHNOLOGIES

Page 1 of 9
Publications Dealer Catalog #23 Catalog Update Chips Comprehensive Chip List Lexmark Chip Cross Reference Reset Box Information Samsung Reset Box Compatibility MasterSet USB Installation Software MasterSet Parallel Port Installation Software Product Info Vacuums Packaging Technical Support Disassembly Instructions Reset Guide Ver. 16 Cross Reference Ver. 9 Update Engine Cross References HP Lexmark Samsung Common Terms & Acronyms Cartscan Customer Service Company Profile Customer Forms Non-Customer Quote Join Email Group International Sales International Distributors Terms & Conditions Track Your Order Contact Us Go to Uninetimaging.com
Remanufacturing the Samsung ML-1610 Toner Cartridge
Overview Supplies Required Tools Required Cartridge Troubleshooting Printing Test Pages

OVERVIEW

First released in July 2005, the Samsung ML-1610 printers are based on a 15ppm, 600dpi engine.
http://www.summitechnologies.com/docs/0365/0365.asp

4/21/2008

These cartridges are based on a completely new engine/cartridge design. The cartridges have a huge handle that folds over the cartridge when installed. Taking them apart is a bit different as well. The good news here is that there is a fuse instead of a chip used to reset the machine. These cartridges do not have a drum cover, and come new with a piece of heavy paper taped around the cartridge. All new cartridges opened so far have shown some toner leakage on the drum that would have shown on any prints. See Figure 1 The replacement cartridge it self is rated for 2,000 pages at 5% coverage. As of July 2005, the Samsung version is not sold in the United States. In fact, Canadian web sites offer them, but cannot sell them into the US. The new Dell laser printer 1100, and the soon to be released Xerox Phaser 3117 are also based on this engine. Its my guess that Dell has an arrangement with Samsung that restricts them from selling the printers into the US, (at least for a while). The starter cartridge is rated for 1000 pages. The Xerox machine has not been released yet so we do not have any further information on availability yet.

Page 2 of 9

PRINTER Samsung ML-1610 Dell LaserPrinter 1100 Xerox Phaser 3117
CARTRIDGE ML-1610D2 310-6640 (GC502) Not released as of 7/05
Figures 2 & 3 show the differences between the starter Dell cartridge and the replacement Dell cartridge. Most likely, the Samsung version will have a slot or tab located is a different place so that they cannot be used in a Dell machine, but we could not get one in time to confirm this. With the Dell machines selling for $99.00, and the replacement cartridges selling for $68.00 each,(July 2005). This will be a very popular machine, and there will be I think a large demand for remanufactured cartridges. The Samsung machine are selling for a bit more, but they also have more features like running at 16ppm VS 15ppm, toner save and a better featured printer driver which offers overlays, watermarks, and multiple pages/page printing.

Figure 2 SUPPLIES REQUIRED
Samsung 1610 Toner 75g Conductive Grease Drum lubricating powder

Figure 3

1) Place the cartridge with the handle facing away from you. Remove the 2 screws on the left end cap. See Figure 4 2) Gently pry off the left end cap. See Figure 5

Page 3 of 9

Figure 4
3) On the front edge of the cartridge, there are two screws, remove them. See Figure 6

Figure 5

4) Lift up and remove the waste chamber from the cartridge. Make sure the tab on the right side slide out of the slot. If you try to lift the cover off with out sliding the tab out, it will break off. See Figure 7

Figure 6

5) Remove the two screws and wiper blade from the waste chamber. See Figures 8 & 9

Figure 7

Figure 8
6) Clean out any remaining toner from the waste chamber.

Figure 9

7) Re-install the wiper blade and two screws. Place the waste chamber aside. See Figure 10 8) Remove the two screws from the right side end cap. Carefully pry off the end cap. See Figure 11

Page 4 of 9

Figure 10
9) Remove the 4 gears, and place aside. See Figure 12 10) Slide the PCR away from the contact side, lift up and remove. See Figure 13 Clean the PCR with your normal PCR cleaner.

Figure 11

WARNING: Do not clean the OEM PCR with alcohol, as this will remove the conductive coating from the roller. If the PCR is an aftermarket, follow the cleaning methods recommended by the manufacturer. If the PCR is an OEM, we recommend it be cleaned with your standard PCR cleaner.

Figure 12

11) Remove the OPC drum. See Figure 14

Figure 13

12) Carefully pry out the fill plug. It fits tight and is easily damaged. Work a small jewelers screwdriver around the edge until the plug comes free. See Figure 15 13) Clean out any remaining toner from the hopper.

Page 5 of 9

Figure 14

Figure 15

14) Gently pry out the roller plate from the cartridge by pressing in on a tab located on the bottom of the cartridge. There is a sprint that is in contact with the developer roller shaft. Move the tail of the spring up so that as the plate is lifted out, it will fall behind it. See Figure 16 16) Remove the Developer Roller by lifting it out. See Figure 17

Figure 16

Figure 17
17) Remove the 2 screws on the doctor blade. On the fill plug side of the blade, there is the other tail of the spring. Lift it up while removing the doctor blade so it is not damaged. See Figures 18 & 19 It is highly recommended that the Doctor Blade be cleaned. Failure to do so will cause streaking. Dampen a cotton swab with alcohol, and clean the blade. Be careful not to press too hard and damage the blade. If the blade has a heavy buildup of toner on it, clean it with Acetone, and then alcohol.

Figure 18

Figure 19
18) Clean the feed roller and any remaining toner from the hopper. See Figure 20 19) Re-install the doctor blade and two screws. Make sure the tail of the spring fits into the proper slot. See Figures 21 & 22 20) Install the developer roller, keyed end to the gear side of the cartridge. See Figure 23

Page 6 of 9

Figure 20

Figure 21

Figure 22

Figure 23

21) Install the roller plate. Route the tail of the spring so that it sits on top of the plate and is in contact with the shaft of the developer roller. Lock the plate in place with the tab. See Figures 24 & 25

Figure 24

23) Install the 4 gears as shown. See Figure 26 24) Install the drum in place. See Figure 27

Figure 25

Page 7 of 9

Figure 26

Figure 27
25) Clean out the old conductive grease from the PCR contact hub and replace with new. A small amount of grease is fine, more is not better when it comes to conductive grease. See Figure 28 26) Install the PCR by sliding it through the non contact side, and into the contact hub. See Figure 29

Figure 28

Figure 29
27) Fill the hopper with the appropriate toner. Replace the fill plug, check for leaks. See Figure 30 28) Install the gear side end cap, and 2 screws. Make sure the PCR fits correctly in its holder, and all the gears are aligned. See Figure 31

Figure 30

Figure 31
29) Install the waste chamber by sliding the tab through the slot in the end cap. Rotate it down, and install the two screws. See Figures 32 & 33

Page 8 of 9

Figure 32

Figure 33

30) Install the remaining end cap and two screws. Make sure the end cap sits flush with the rest of the cartridge. See Figures 34 & 35

Figure 34

Figure 35
31) Replace the fuse located on the right front of the cartridge (with the handle away from you. Start cartridges do not have a fuse at all, but the holding tabs are there. The fuse is a 63mA 250V fast acting 5 x 20mm glass type. See Figure 36

Figure 36 TOOLS REQUIRED

Toner approved vacuum A small Common screw driver A Phillips head screwdriver

Needle Nose Pliers

Page 9 of 9
CARTRIDGE TROUBLESHOOTING
Repetitive Defect Chart PCR 38mm Developer Roller 44mm OPC Drum 75mm
A Dirty or Bad Primary Charge Roller (PCR); located Inside the cartridge, this will show on the test print as vertical gray streaks down the page, as a gray background throughout the page, as ghosting where part of a previously printed area is repeated, or as a mark that repeats every 38mm. Dirty PCR Connection; This will show as horizontal dark black bars across the page, or as shading throughout the page. Scratched Drum; This is shown by a very thin, perfectly straight line that runs from the top to the bottom of the test page. Chipped Drum; This will show as a dot or series of dots that repeat every 75mm. Light Damaged Drum; This will show up as a shaded area on the test print that should be white. Again this will repeat every 75mm. Bad Wiper Blade; This will show as either a gray line approximately 1/8" thick, or as shading across the entire page. In either case there will be a film of toner on the drum surface. Bad Developer Roller; This will show up as light print or as a mark that repeats every 44mm Machine Error Codes: These machines do not have a display panel. They use a series of LEDs to indicate a problem. There are two lights on the control panel, the POWER, and the ERROR lights. The POWER light is a Green LED, and the ERROR LED is a two color LED, Red and Orange. The user manual for these machines only has very basic information listed as follows: If both lights are blinking, the machine has problems and needs service. (Helpful isnt it!) If the Error light is on steady red, and the power light is off, there could be a number of problems. Either there is a paper jam, the front cover is open, or the toner cartridge is not installed. If the Error light is blinking orange, the printer is set to manual feed, and there is no paper in the tray. If the Error light is on steady in Orange, that is the toner low message.

PRINTING TEST PAGES

Demo Page Press and hold the X button for 2 seconds until both LEDs blink. A demo page will print out