Sales Line : 0005 Visit This Product on Laptops Direct
Samsung SyncMaster 2033SW - flat panel display - TFT 20 Inch - LS20CMZKFV/EN

132.97 inc.vat

Summary
SAMSUNGs SyncMaster 2033SW is a high quality 20" display with a chic, slim design that gives you the visibility you need without taking up precious desk space. The combination of its ultra fast 5 ms (GTG) response time, 15000:1 dynamic contrast ratio, and 300cd/m2 brightness, gives superb picture quality.
s s s s s s s s s s s s s s s
Product Description - Samsung SyncMaster 2033SW - LCD display - TFT - 20" Device Type - LCD display / TFT active matrix Colour - Glossy black Dimensions (WxDxH) - 48.6 cm x 20 cm x 37.4 cm Weight - 4.5 kg Diagonal Size - 20" - widescreen Max Resolution - 1600 x 900 Colour support - 24-bit (16.7 million colours) Response Time - 5 ms Image Brightness - 300 cd/m2 Image Contrast Ratio - 15000:1 (dynamic) Digital Video Standard - Digital Visual Interface (DVI) Signal Input - DVI-D, VGA Compliant Standards - CE, DDC-2B CE, DDC-2B Power Consumption Operational - 37 Watt

Technical Specifications

Price correct as at Sunday, October 24, 2010 6:12 AM. Please check the website for the latest price.

Do not spray cleaner directly onto the surface of the product. Otherwise, this may result in the discoloration and distortion of the structure and the screen surface may peel off.
Clean the product using a soft cloth with a monitor cleaner only. If you must use a cleaner other than the monitor cleaner, dilute it with water at a ratio of 1:10.
When cleaning the power plug pins or dusting the power outlet, clean it with a dry cloth. Otherwise, it may result in fire. When cleaning the product, make sure to disconnect the power cord. Otherwise, it may result in electric shock or fire.
When cleaning the product, disconnect the power cord and clean it softly with a dry cloth. (Do not use chemicals such as wax, benzene, alcohol, thinner, mosquito repellant, lubricant, or cleaner.) These may change the appearance of the product surface and peel off the indication labels on the product.
Since the product housing is easily scratched, make sure to use the specified cloth only. Use the specified cloth adding only a little water. As the product may be scratched if there is any foreign material on the cloth, make sure to shake it thoroughly before using it.
When cleaning the product, do not spray water directly onto the main body of the product. Ensure that water does not enter the product and that it is not wet. Otherwise, this may result in electric shock, fire or a malfunction.

Others

The product is a high voltage product. Ensure that users do not disassemble, repair or modify the product themselves. Otherwise, this may result in electric shock or fire. If the product needs to be repaired, contact a Service Center.
If there is a strange smell or a strange sound or smoke is coming from the product, disconnect the power plug immediately and contact a Service Center. Otherwise, this may result in electric shock or fire.
Do not place this product in a location exposed to moisture, dust, smoke, water, or in a car. Otherwise, this may result in electric shock or fire.
When you drop the product or the case is broken, turn the power off and disconnect the power cord. Contact a Service Center. Otherwise, this may result in electric shock or fire.

When there is a gas leak, do not touch the product or the power plug but ventilate immediately. If a spark occurs, it may cause an explosion or fire.
If the product has been turned on for a long time, the display panel becomes hot. Do not touch it.
Be careful when adjusting the angle of the product or the height of the stand. This may result in personal injury as your hand or fingers may become caught. Also, if you tilt the product too far, it may fall and cause personal injury.
Do not install the product in a location low enough for children to reach. Otherwise, it may fall and result in personal injury. Since the front part of the product is heavy, install the product on a level and stable surface. Do not put any heavy objects on the product. This may result in personal injury and/or damage to the product.
Good Postures When Using the Monitor When using the product, use it in the correct position. Keep your back straight while looking at the product. The distance between your eyes and the screen should be between 45 to 50 cm. Look at the screen from a slightly higher location than the height of the screen. When using the product, use it in the correct position. Adjust the angle so that light is not reflected on the screen. Place your arms perpendicular to your sides and allow your arms to be level with the back of the hand. Keep your elbow at 90 degrees. Keep your knees at greater than 90 degrees, and keep your heels firmly on the floor. Keep your arms lower than your heart.

Introduction

Package Contents
Note Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items.

Unpacking

Without stand

With stand

Monitor Manuals

Monitor

Quick Setup Guide
Warranty Card (Not available in all locations)

User's Guide

Cables
D-Sub Cable Sold separately

Power Cord

Stereo Cable

DVI Cable

HDMI Cable

Headphones

Sold separately

USB Cable

TV Antenna Cable (Coaxial Cable)

Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device drivers on my computer".
Click "Have Disk. and select the folder (for example, D:\Drive) where the driver setup file is located, and click "OK".
Select the model that matches your monitor from the list of monitor models on the screen, and click "Next".
10. Click "Close" "Close" "OK" "OK" on the following screens displayed in sequence.
Microsoft Windows XP Operating System
Using the Software 1. 2. Insert CD into the CD-ROM drive. Click "Start" "Control Panel" then click the "Appearance and Themes" icon.
Click "Display" icon and choose the "Settings" tab then click "Advanced.".
Click the "Properties" button on the "Monitor" tab and select "Driver" tab.
Click "Update Driver." and select "Install from a list or." then click "Next" button.
Select "Don't search, I will." then click "Next" and then click "Have disk".
Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model list and click the "Next" button.
If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button.
Note This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ 9. Click the "Close" button then click "OK" button continually.
10. Monitor driver installation is completed. Microsoft Windows 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. 2. 3. Choose "OK" button on the "Insert disk" window. Click the "Browse" button on the "File Needed" window. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button.

How to install 1. 2. 3. 4. Click "Start", "Setting", "Control Panel". Double click the "Display" icon. Select the "Settings" tab and click "Advanced Properties" button. Choose "Monitor". Case1 : If the "Properties" button is inactive, it means your monitor is properly configured. Please stop installation Case2 : If the "Properties" button is active, click the "Properties" button then follow next steps continually. 5. 6. 7. 8. 9. Click "Driver" and then click on "Update Driver." then click on the "Next" button. Choose "Display a list of the known drivers for this device so that I can choose a specific driver" then click "Next" and then click "Have disk". Click the "Browse" button then choose A:(D:\Driver). Click the "Open" button, then click "OK" button. Choose your monitor model and click the "Next" button then click "Next" button.
10. Click the "Finish" button then the "Close" button. If you can see the "Digital Signature Not Found" window then click the "Yes" button. And click the "Finish" button then the "Close" button. Microsoft Windows Millennium Operating System 1. 2. 3. Click "Start", "Setting", "Control Panel". Double click the "Display" icon. Select the "Settings" tab and click "Advanced Properties" button.
Using the Software 4. 5. 6. 7. 8. 9. Select the "Monitor" tab. Click the "Change" button in the "Monitor Type" area. Choose "Specify the location of the driver". Choose "Display a list of all the driver in a specific location." then click "Next" button. Click the "Have Disk" button. Specify A:\(D:\driver) then click "OK" button.
10. Select "Show all devices" and choose the monitor that corresponds to the one you connected to your computer and click "OK". 11. Continue choosing "Close" button and "OK" button until you close the Display Properties dialogue box. Microsoft Windows NT Operating System 1. 2. 3. 4. Click "Start", "Settings", "Control Panel", and then double-click "Display" icon. In Display Registration Information window, click Settings Tab and then click "All Display Modes". Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then click "OK". Click "Apply" button if you see the screen working normally after clicking "Test". If the screen is not normal, change to a different mode (lower mode of resolution, colors or frequency). Note If there is no Mode at All Display Modes, select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide. Linux Operating System To execute X-Window, you need to make the X86Config file, which is a type of system setting file. 1. 2. 3. 4. 5. 6. 7. 8. 9. Press "Enter" at the first and the second screen after executing the X86Config file. The third screen is for setting your mouse. Set a mouse for your computer. The next screen is for selecting a keyboard. Set a Keyboard for your computer. The next screen is for setting your monitor. First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.) Set a vertical frequency for your monitor. (You can enter the frequency directly.) Enter the model name of your monitor. This information will not affect the actual execution of X-Window.

Multi-Track Sound

Mono : Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal. Stereo : Choose for channels that are broadcasting in stereo. SAP : Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.
(Available in Analog TV Mode Only) MENU , , , MENU,EXIT

Auto Volume

Reduces the differences in volume level among broadcasters. Off On , , , MENU,EXIT

TV Speaker

If you set this menu "On", sound output from the speakers is muted in case of using the home theater. Off On , , , MENU,EXIT

Channel Available Modes

PC / DVI TV Component HDMI Note The default setting may different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution.

Antenna

Adjusting the Monitor You can select a normal or wired channel. If ANT IN are connected, select the antenna input you want. If the antenna input is not selected properly, noise may appear on the screen. Air Cable , , MENU,EXIT

Auto Program

The TV automatically cycles through all of the available channels and stores them in memory. In rare cases, "Auto program" may miss a few channels due to weak signals and the channels may not be added to the channel memory. Air Cable Auto , , , , , , MENU,EXIT

Clear Scrambled Channel

Adjusting the Monitor The Clear Scrambled Channel function is used to filter out scrambled channels after "Auto Program" is completed. It removes the scrambled channels from the list by tuning the digital cable channels. This process may take up to 20~30 minutes. (Available in Digital Cable TV Mode Only) MENU , , MENU,EXIT

Channel List

You can manage the channels.

MENU , MENU,EXIT

Note All selected channels will be shown on Added menu. , , , ,

MENU , MENU,EXIT

Favorite
Note Only memorized channels can be set as favorite channels. All favorite channels will be shown in the Favorite menu. , , , ,

If channel name information is broadcast when you store the channels either manually or automatically, the names are assigned to the channels directly. You can however change these names or assign new names as required. (Available in Analog TV Mode Only) MENU , , , , , , , MENU,EXIT

Fine Tune

Due to weak signals or an incorrect antenna configuration, some of the channels may not be tuned correctly. (Available in Analog TV Mode Only) MENU , , , , MENU,EXIT

Signal Strength

Unlike analog channels, which can vary in reception quality from "snowy" to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels. If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal. (Available in Digital Cable TV Mode Only) MENU , , MENU,EXIT

Setup Available Modes

Plug & Play
You can manage the entire configuration. MENU , , , , , MENU,EXIT , , , , ,

Language

You can choose one of 3 languages.
The language chosen affects only the language of the OSD. MENU , , MENU,EXIT

Time Clock

You can set the current time.

- Clock Mode

Auto / Manual MENU , , , MENU,EXIT

- Clock Set

Note Clock Set are available only when Clock Mode set to Manual. MENU , , , , , , MENU,EXIT

- Time Zone

Note Time Zone are available only when Clock Mode set to Auto. MENU , , , , MENU,EXIT
Note DST are available only when Clock Mode set to Auto. Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time manually. The Antenna or cable must be connected in order to set the time automatically. , , , , MENU,EXIT

Sleep Timer

Use to set the Monitor to be turned off automatically in certain minutes. Off, 30, 60, 90, 120, 150, 180 , , , , , , MENU,EXIT

Timer1 / Timer2 / Timer3

You can set the monitor to be turned on or off automatically at a specified time. Note Setting the clock is necessary in order to use the various timer features of the product. Three different On/Off Timer Settings can be made. MENU , , , , , , MENU,EXIT

Melody

A melody sound can be set to come on when the monitor is powered On or Off. Off : Turns off the melody function. Low : Sets the melody volume to low. Medium : Sets the melody volume to medium. High : Sets the melody volume to high. , , , MENU,EXIT

Light Effect

You can turn on/off the LED on the front of monitor according to the situation. Use it for saving power or when the LED dazzles your eyes. Off : LED will not come on. In Standby : Turns the LED on in standby mode. In Watching TV : Turns the LED on while watching TV. Always : LED is always on. , , , MENU,EXIT

Light Level

Use to adjust the light level i.e., the brightness of the light. MENU , , , MENU,EXIT

Energy Saving

This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the "Energy Saving" mode option to "High" to reduce eye fatigue as well as power consumption. Off : Turns off the energy saving function. Low : Sets the TV to low energy saving mode. Medium : Sets the TV to medium energy saving mode. High : Sets the TV to high energy saving mode. , , , MENU,EXIT

SW Upgrade

Use to upgrade the software. USB , , MENU,EXIT

Input Available Modes

Source List
Use to select PC, TV or other external input source connected to the Monitor.Use to select the screen of your choice.
Adjusting the Monitor The direct button on the remote control is "SOURCE" button. PC DVI TV Component HDMI1 HDMI2 , ,

Edit Name

Name the input device connected to the input jacks to make your input source selection easier PC DVI Component HDMI1 HDMI2 , , , MENU,EXIT

Troubleshooting

Self-Test Feature Check
Note Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly.
1. 2. 3. Turn off both your computer and the monitor. Unplug the video cable from the back of the computer. Turn on the monitor. If the monitor is functioning properly, you will see a box in the illustration below.
This box appears during normal operation if the video cable becomes disconnected or damaged. 4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.

If your monitor screen remains blank after using the previous procedure, check your video controller and computer system; your monitor is functioning properly.

Not Optimum Mode

If there is something wrong with the input signal, a message appears on the screen or the screen goes blank although the power indicator LED is still on. The message may indicate that the monitor is out of scan range or that you need to check the signal cable.
Note Refer to Specifications > Preset Timing Modes for the resolutions or frequencies that are supported by the monitor.

Maintenance and Cleaning

1. Maintaining the Monitor Case. Clean with a soft cloth after disconnecting the power cord.
Do not use benzene, thinner or other flammable substances, or a wet cloth. We recommend a Samsung cleansing agent is used to prevent damage to the screen.
2. Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel) smoothly. Never use acetone, benzene or thinner. (They may cause flaws or deformation of the screen surface.) The user will be required to pay costs and related expenses for repair of damages caused by improper cleaning and usage.
Symptoms and Recommended Actions
Note A monitor recreates visual signals received from the computer. Therefore, if there is trouble with the computer or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the SOURCE of the problem, and then contact a service center or your dealer. 1. Check if the power cord and the video cables are properly connected to the computer. 2. Check if the computer beeps more than 3 times when booting. (If it does, request an after-service for the main board of the computer.) 3. If you installed a new video card or if you assembled the PC, check if you installed the adapter (video) driver and the monitor driver. 4.Check if the scanning ratio of the video screen is set at 56 Hz ~ 75 Hz. (Do not exceed 60 Hz when using the maximum resolution.) 5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel, System, Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.

Check List

Note Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer.
1. Problems related to Installation
Note Problems related to the monitor installation and their solutions are listed.

PC Mode

Q: A: Q: A: It appears the PC does not function normally. Check if the Display Adapter Driver (VGA Driver) is properly installed. (Refer to Installing Driver) The monitor screen flickers. Check if the signal cable between the computer and the monitor is securely connected and tightened.(Refer to Connecting the monitor)

Q: A: Q: A: Q: A: A: Q: A:
3. Problems related to Audio
Note Problems related to audio signals and their solutions are listed below. Q: A: A: Q: A: A: No sound Ensure that the audio cable is firmly connected to both the audio-in port on your monitor and the audio-out port on your sound card.(Refer to the Connecting the monitor) Check the volume level.(Refer to the Volume) The sound level is too low. Check the volume level.(Refer to the Volume) If the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card or software program.
4. Problems related to Remote Control
Note Problems related to the remote control and their solutions are listed. Q: A: A: A: The remote control buttons do not respond. Check the battery polarities (+/-). Check if the batteries have been exhausted. Check if the power is on.
Troubleshooting A: A: Check if the power cord is securely connected. Check if a special fluorescent or neon lamp is on in the vicinity
5. You may see small particles if you look closely at the edge of the bezel surrounding the screen.
This is part of the products design and is not a defect.

Q&A

Q: A: A: Q: A: How can I change the frequency? The frequency can be changed by reconfiguring the video card. Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) How can I adjusts the resolution? Windows XP: Set the resolution in the Control Panel Appearance and Themes Display Settings. A: Windows ME/2000: Set the resolution in the Control Panel Display Settings. * Contact the video card manufacturer for details. Q: A: How can I set the Power Saving function? Windows XP: Set the resolution in the Control Panel Appearance and Themes Display Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). A: Windows ME/2000: Set the resolution at the Control Panel Display Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). Q: A: How can I clean the outer case/LCD Panel? Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning solution or plain water. Do not leave any detergent or scratches on the case. Do not let any water enter the monitor. Q: A: What are the benefits of digital broadcasting? Digital TV broadcasting generates less noise and provides clearer visuals and sound than analog TV broadcasting does. As services develop, you can also enjoy various information services because various kinds of data besides video and audio can be sent. For example, while watching a sports game, you can view various data on your favorite player or you can view all or selected screens which have been captured from different angles for a

Troubleshooting specific scene. In addition, you can retrive information on a previous story or drama or you can buy home shopping products such as an accessory currently on TV. Digital TV broadcasting allows you to easily access various information services in your home creating a more information-oriented home. Q: A: A: What is the difference between HDTV and SDTV? There are various types of digital TVs. The most widely known types of digital TV are HDTV and SDTV. They are classified according to the screen quality and the video specifications. A: HDTV (High Definition TV): High screen quality, very clear TV. SDTV (Standard Definition TV): Common standard digital TV.
An SDTV has an aspect ratio of 4:3 which is the same as that of an analog TV. SDTV has an aspect ratio of 16:9 which is similar to a cinema screen. This provides a much better screen quality than SDTV. It's like having a theater in your home. Digital TV broadcasting in our country is ultimately orientated towards HDTV. Can I watch HD broadcasting with all digital TVs? You can receive all digital broadcasts, whether they are SD or HD, using any digital TV. However, you cannot enjoy HD programs, which are the highest quality digital TV programs, using an SD digital TV. Especially, as SD broadcasting has an aspect ratio of 4:3, HD broadcasting has an aspect ratio of 16:9, similar to a cinema screen. Therefore, to enjoy the full benefits of digital TV, it is better to purchase an HD digital TV. (At present, all digital TVs from Samsung Electronics have the 16:9 wide aspect ratio.)

A: Q: A:

Q: A: A: Q: A: A: Q: A: A:
Can I watch digital TV broadcasting with an analog TV? No. The analog TV cannot interpret digital signals. Therefore, a digital TV is required to watch digital TV broadcasting. Can I use my present antenna to receive digital broadcasting? As for existing analog TV, digital TV is designed so that digital broadcasting signals are received via both indoor and outdoor antennas. If signal reception is very good in your environment, you can watch digital broadcasts with your existing indoor antenna. If not, it is better to install an outdoor UHF antenna. How do I connect an antenna for an apartment or tenement house? Consult the superintendent's office or broadcasting facility administrator for your apartment or tenement house to check whether UHF reception is available. Even if digital TV broadcasting is available in your area, if you cannot watch it because the superintendent's office or common broadcasting facility does not rebroadcast the signal, you have to install an indoor or outdoor antenna. Alternatively, your local cable broadcasting company provides a digital TV service, and you can subscribe to it.

This screen is shown when This screen is shown when This screen is shown when scenes are captured using dig- scenes are converted to ana- scenes created via analog sigital broadcasting equipment log broadcasting signals benals are displayed while fore being sent. Humans and
Information and they are sent in HDTV objects appear heavier than in watching HDTV broadcast(16:9) mode. reality. ing. Note If temporary stops, mosaic screens, or jagged screens occur, this is not a TV problem. Contact your cable broadcasting company for a check-up. For information on how to connect and use your video, DVD, DVD combo, home theater, PC, etc., refer to their respective user manuals.
PRODUCT INFORMATION (Image Retention Free)
LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time. This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention. Warranty Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty. What is Image retention ? During normal operation of a LCD panel, pixel image retention doesn't occur. However, if the same image is displayed for a long time, a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal. This may cause the liquid crystal to build up in a certain areas of the display. Thus, the previous image is retained when switching to a new video image. All display products, including LCD, are subject to image retention. This is not a product defect. Please follow the suggestions below to protect your LCD from image retention.
Power Off, Screen Saver, or Power Save Mode Ex) Turn the power off when using a stationary pattern. Turn the power off for 4 hours after 20 hours in use Turn the power off for 2 hours after 12 hours in use
Use a Screen saver if possible Screen saver in one color or a moving image is recommended.
Set the Monitor to power off with the PC Display Properties Power Scheme. Suggestions for specific applications

Ex) Airports, Transit Stations, Stock Markets, Banks, and Controlling Systems We recommend that you follow set up of your display system program as below: Display Information together with Logo or Moving image cycle.
Information Ex) Cycle : Display Information for 1 hour followed by a Display Logo or moving image for 1 minute. Change the Color Information periodically (Use 2 different colors). Ex) Rotate the Color Information with 2 colors every 30 minutes.
Avoid using a combination of characters and background color with large difference in luminance. Avoid using Grey colors, which can cause Image retention easily. Avoid: Colors with big difference in luminance (Black & White, Grey) Ex)
Recommended settings: Bright colors with little difference in luminance Change the characters color and background color every 30 minutes Ex)
Every 30 minutes, change the characters with movement. Ex)
The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it.
Information Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video patterns. When the LCD panel is operated for a long time with a fixed pattern (-over 12 hours-), there may be slight difference in voltage between electrodes that work the liquid crystal (LC) in a pixel. The voltage difference between electrodes increases with time, forcing the liquid crystal to lean. When this occurs, the previous image may be seen when the pattern is changed. To prevent this, the accumulated voltage difference must be decreased.
Our LCD Monitor satisfies ISO13406-2 Pixel fault Class II

Appendix

Contact SAMSUNG WORLDWIDE
Note If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North America U.S.A CANADA MEXICO 1-800-SAMSUNG(726-7864) 1-800-SAMSUNG(726-7864) http://www.samsung.com http://www.samsung.com/ca
01-800-SAMSUNG(726-7864) http://www.samsung.com Latin America

ARGENTINE BRAZIL

0800-333-3733 0800-124-421 4004-0000
http://www.samsung.com/ar http://www.samsung.com
CHILE COLOMBIA COSTA RICA ECUADOR EL SALVADOR GUATEMALA HONDURAS JAMAICA NICARAGUA PANAMA PUERTO RICO REP. DOMINICA
800-SAMSUNG(726-7864) 01-8000112112 0-800-507-7267 1-800-10-7267 800-6225 1-800-299-0013 800-7919267 1-800-234-7267 00-1800-5077267 800-7267 1-800-682-3180 1-800-751-2676

http://www.samsung.com/cl http://www.samsung.com/co http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin
TRINIDAD & TO- 1-800-SAMSUNG(726-7864) BAGO VENEZUELA 0-800-100-5303 Europe AUSTRIA BELGIUM 0800-SAMSUNG (726-7864) 0032 (0)24 18
http://www.samsung.com/at http://www.samsung.com/be http://www.samsung.com/cz

CZECH REPUBLIC 844

DENMARK EIRE FINLAND FRANCE

100 030-6227 515

http://www.samsung.com/dk http://www.samsung.com/ie http://www.samsung.com/fi
3260 SAMSUNG ( 0,15/Min) http://www.samsung.com 65 ( 0,15/Min)
Europe GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND 01805 - SAMSUNG (726-7864) http://www.samsung.com ( 0,14/Min) 06-80-SAMSUNG (726-7864) 800-SAMSUNG (726-7864) 0035 (0)http://www.samsung.com http://www.samsung.com http://www.samsung.com/be
0900 SAMSUNG (726-7864 http://www.samsung.com/nl 0,10/Min) 815-022-607-93-33 http://www.samsung.com/no http://www.samsung.com/pl
PORTUGAL SLOVAKIA SPAIN SWEDEN SWITZERLAND U.K
80820-SAMSUNG (726-7864) 0800-SAMSUNG (726-7864) 0771-0800-SAMSUNG (726-7864) 0845 SAMSUNG (7267864) CIS
http://www.samsung.com/pt http://www.samsung.com/sk http://www.samsung.com http://www.samsung.com/se http://www.samsung.com/ch http://www.samsung.com
ESTONIA LATVIA LITHUANIA KAZAKHSTAN KYRGYZSTAN RUSSIA TADJIKISTAN UKRAINE UZBEKISTAN
800-7267 800-7267 8-800-77777 8-10-800-500-55-500 00-800-500-55-500 8-800-555-55-55 8-10-800-500-55-500 8-800-502-0000 8-10-800-500-55-500 Asia Pacific
http://www.samsung.ee http://www.samsung.com/lv http://www.samsung.lt http://www.samsung.kz http://www.samsung.ru http://www.samsung.com http://www.samsung.uz

AUSTRALIA CHINA

603 800-810-5858 010-6475 1880
http://www.samsung.com http://www.samsung.com

HONG KONG INDIA

3698 - 110011
http://www.samsung.com/hk http://www.samsung.com
INDONESIA JAPAN MALAYSIA NEW ZEALAND PHILIPPINES SINGAPORE THAILAND
0800-112-8888 0120-327-527 1800-88-SAMSUNG(726-7864) 1800-SAMSUNG(726-7864) 1800-29-3232, 02-689-3232