Specifications Display Type Viewable Size Native Resolution Pixel Pitch (mm) Aspect Ratio Contrast Ratio (Typical/Dynamic) Viewing Angle (Horizontal/Vertical) Response Time Light Source Color Gamut (NTSC %) Brightness (Typical) Panel Surface Maximum Color Supported Video Input Signal Analog Digital Frequency (H/V) Sync Compatibilty PC Mac Input Connectors Power Voltage Consumption (max/standby) Controls Basic
T190 a-si TFT/TN 19" Wide 1440 x 900 0.285 16:10 1000:1/20000:1 170/160 (CR>10) 2ms (GTG) CCFL 82% 300 cd/m2 Matte 16.7M Analog RGB DVI with HDCP 30~81kHz (H) / 56~75Hz (V) H/V Separated, Composite H/V, SOG Windows Vista Premium Certification, XP, 2000, 98 Mac OS Leopard, X, 9 15-pin D-sub, DVI-D, 3-pin AC plug (CEE22) AC 100-240 ~ VAC ( 10%), 60 / 50 Hz 3 Hz 34 watts (max)/ <1watts (DPMS mode) Power, Auto Adjustment, Source, Brightness up/down, Customized Key, OSD Menu Picture (Brightness, Contrast, Magic Bright), Color (MagicColor, Color Tone, Color Control, Color Effect, Gamma), Image (Coarse, Fine, Sharpness, H position, V position), OSD (Language, H position, V position, Transparency, Display Time), Setup (Reset, Customized Key, Auto Source, Image Size, LED Brightness) DDC 2B/DDC-CI Rose Black/Black 0.3 watts (Power off)/34 watts (max) N/A n n n n
T220 a-si TFT/TN 22" Wide 1680 x 1050 0.282 16:10 1000:1/20000:1 170/160 (CR>10) 2ms (GTG) CCFL 82% 300 cd/m2 Matte 16.7M Analog RGB DVI with HDCP 30~81kHz (H) / 56~75Hz (V) H/V Separated, Composite H/V, SOG Windows Vista Premium Certification, XP, 2000, 98 Mac OS Leopard, X, 9 15-pin D-sub, DVI-D, 3-pin AC plug (CEE22) AC 100-240 ~ VAC ( 10%), 60 / 50 Hz 3 Hz 45 watts (max)/ <1watts (DPMS mode) Power, Auto Adjustment, Source, Brightness up/down, Customized Key, OSD Menu Picture (Brightness, Contrast, Magic Bright), Color (MagicColor, Color Tone, Color Control, Color Effect, Gamma), Image (Coarse, Fine, Sharpness, H position, V position), OSD (Language, H position, V position, Transparency, Display Time), Setup (Reset, Customized Key, Auto Source, Image Size, LED Brightness) DDC 2B/DDC-CI Rose Black/Black 0.3 watts (Power off)/45 watts (max) N/A n n n n
T240 a-si TFT/TN 24" Wide 1920 x 1200 0.270 16:10 1000:1/20000:1 160/160 (CR>10) 5ms CCFL 82% 300 cd/m2 Matte 16.7M Analog RGB DVI, HDMI 30~81kHz (H) / 56~75Hz (V) H/V Separated, Composite H/V, SOG Windows Vista Premium Certification, XP, 2000, 98 Mac OS Leopard, X, 9 15-pin D-sub, DVI-D, USB 2.0, HDMI, 3-pin AC plug (CEE22), SPDIF AC 100-240 ~ VAC ( 10%), 60 / 50 Hz 3 Hz 60 watts (max)/ <2watts (DPMS mode) Power, Auto Adjustment, Source, Brightness up/down, Customized Key, OSD Menu Picture (Brightness, Contrast, Magic Bright), Color (MagicColor, Color Tone, Color Control, Color Effect, Gamma), Image (Coarse, Fine, Sharpness, H position, V position), OSD (Language, H position, V position, Transparency, Display Time), Setup (Reset, Customized Key, Auto Source, Image Size, LED Brightness), AV mode (DVI, HDMI), HDMI black Level (HDMI) DDC 2B/DDC-CI Rose Black/Black 0.3 watts (Power off)/60 watts (max) n (1 up/2 down) n n n n
T260 a-si TFT/TN 25.5" Wide 1920 x 1200 0.287 16:10 1000:1/20000:1 170/150 (CR>10) 5ms CCFL 82% 300 cd/m2 Matte 16.7M Analog RGB DVI, HDMI 30~81kHz (H) / 56~75Hz (V) H/V Separated, Composite H/V, SOG Windows Vista Premium Certification, XP, 2000, 98 Mac OS Leopard, X, 9 15-pin D-sub, DVI-D, USB 2.0, HDMI, 3-pin AC plug (CEE22), SPDIF AC 100-240 ~ VAC ( 10%), 60 / 50 Hz 3 Hz 55 watts (max)/ <2watts (DPMS mode) Power, Auto Adjustment, Source, Brightness up/down, Customized Key, OSD Menu Picture (Brightness, Contrast, Magic Bright), Color (MagicColor, Color Tone, Color Control, Color Effect, Gamma), Image (Coarse, Fine, Sharpness, H position, V position), OSD (Language, H position, V position, Transparency, Display Time), Setup (Reset, Customized Key, Auto Source, Image Size, LED Brightness), AV mode (DVI, HDMI), HDMI black Level (HDMI) DDC 2B/DDC-CI Rose Black/Black 0.3 watts (Power off)/55 watts (max) n (1 up/2 down) n n n n

Advanced

Features Special Features
Plug & Play Bezel/Cabinet Color Low Power Consumption Built-in USB Multi Screen (Screen Organizer) Optical Digital Sound (SPDIF)

Magic Technologies

MagicColor (Full and Intelligent Mode) MagicBright3 (Custom, Text, Internet, Game, Sport, Movie, Dynamic Contrast) MagicTune (On-screen Asset Management with MagicWizard and MagicKey)
Operating Conditions Dimensions and Weight

Temperature Humidity Product Dimension (With Stand, W x H x D) Product Dimension (Without Stand, W x H x D) Shipping Carton Dimension (W x H x D) Product Weight (With Stand) Shipping Weight
10~ 40 C 10% ~ 80%, non-condensing 17.9" x 15.7" x 7.7" 17.9" x 13" x 2.9" 20.7" x 19.2" x 5.3" 10.1 lbs. 13.7 lbs. Tilt EMC n n CCFL panel contains mercury, please dispose of properly All packing materials are recyclable Monitor, Power Cable, 15-pin D-sub Cable, DVI-D Cable, Manuals, Driver CD 3 years parts and labor
10~ 40 C 10% ~ 80%, non-condensing 20.5" x 17.4" x 8.5" 20.5" x 14.4" x 2.9" 23.7" x 21.3" x 5.6" 12.8 lbs. 16.5 lbs. Tilt EMC n n CCFL panel contains mercury, please dispose of properly All packing materials are recyclable Monitor, Power Cable, 15-pin D-sub Cable, DVI-D Cable, Manuals, Driver CD 3 years parts and labor
10~ 40 C 10% ~ 80%, non-condensing 22.6" x 18.8" x 9.6" 22.6" x 16.1" x 3.1" 26" x 22.5" x 6.7" 15 lbs. 20.3 lbs. Tilt, Swivel EMC n n CCFL panel contains mercury, please dispose of properly All packing materials are recyclable Monitor, Power Cable, 15-pin D-sub Cable, DVI-D Cable, Manuals, Driver CD 3 years parts and labor
10~ 40 C 10% ~ 80%, non-condensing 24" x 19.8" x 9.6" 24" x 17.1" x 3.1" 27.6" x 22.3" x 7.3" 17.9 lbs. 23.1 lbs. Tilt, Swivel EMC n n CCFL panel contains mercury, please dispose of properly All packing materials are recyclable Monitor, Power Cable, 15-pin D-sub Cable, DVI-D Cable, Manuals, Driver CD 3 years parts and labor
Stand Type Environmental Emission Standard RoHS Compliant Energy Star Compliant Product Recyclability Packaging Recyclability Package Contents Warranty
Product Information: 1-866-542-7214 Product Support: 1-800-SAMSUNG www.samsungforbusiness.com
2008 Samsung Electronics America, Inc. Samsung is a registered trademark of Samsung Electronics Corp., Ltd. Specifications and design are subject to change without notice. See www.samsung.com for detailed information. Printed in USA. ToCSeries4/08R1
imagine artisan meeting engineer.
Samsung Touch of Color Series LCD Monitors SyncMaster T190/T220/T240/T260
Samsung T190 T220 T240 T260
Touch of Color Series Widescreen LCD Monitors
imagine being inspired by something old to create something completely new. When sand was fused with soda for the first time around 2500 B.C., a new material was created: glass. And now Samsung designers have fused a clear-as-glass plastic with an opaque, rose-black plastic, to create something completely new in the monitor industry: the Samsung Touch of Color Series widescreen LCD monitors. Luxurious glass-like frames with gracefully sculpted edges join with rose-black bezels to give a soft hint of rich red. The result is an elegant monitor that feels more like handcrafted artwork than a high-performance office tool. The stunning Samsung Touch of Color widescreen LCD monitors. The fusion of high technology and high style. With Samsung, its not hard to imagine.

There arent other monitors like these anywhere. Of course.
Who we created ToC monitors for. Samsung ToC monitors are for anyone who believes that work doesnt always have to feel like work. Theyre for those who appreciate style and design even in ordinary things. Theyre works of art. Theyll be a pleasure to work on or game on or whatever on every day. Theyre an unexpected bright spot in an industry of sameness. And theyre exactly what you should have been expecting from Samsung. Samsung values design every bit as much as we value technology. We go to work every morning too, and just like you, we want to feel inspired when we walk in the door each morning. We feel very strongly that every product we put our logo on should both perform better and look better than anything else on the market. The latest result of that way of thinking is the beautifully hand-sculpted-feeling Touch of Color series monitors.
Reduces Glare While the crystal-like bezel frame catches light beautifully, it doesnt glare harshly. In fact, it actually reduces refelection of light off the bezel. ToC monitors are easier on your eyes, in more ways than one.
Better and Safer Since the rich red color is injection molded for a blown glass effect, instead of spray painted, theres less environmental impact.
Yes, its a pretty face. But its also ready to work.
You cant just sit and admire your Touch of Color monitor all day long. At some point, you have to turn it on and start working. When you do, youll be every bit as impressed with the images as you are with the design.
20,000:1 Dynamic Contrast Ratio

Conventional

Samsung
The ToC monitors continually analyze the input signal and adjust the contrast to match. The ultra-wide range gives you blacks and whites that are full of detail, even under adverse lighting conditions.

Ultra-fast Response Time

2ms GTG response (T190, T220) and 5ms response (T240, T260) ensure blur-free videos and gaming.
Exclusive MagicColor Technology Samsungs MagicColor technology gives you richer, more natural color by enhancing the color overall (Full mode) or by enhancing color without affecting delicate skin tones (Intelligent mode). Exclusive MagicBright 3 Technology You can make the stunning picture even better. Samsungs MagicBright 3 technology gives you seven presets, so you can tailor your screen setting to the type of media youre viewing. Presets include Text, Internet, Game, Sport, Movie, Print View and Custom. Windows Vista Premium Certification ToC monitors are designed to take full advantage of everything Windows Vista OS has to offer. Customizable Hot Key Want to open a favorite application with one button? Or connect to the internet? Or adjust picture modes? A customizable hot key puts your favorite preference or command at the tip of your finger. Multi Screen Need some organization in your life? Multi Screen can help. You can assign applications and open windows to different quadrants of the screen, and reduce desktop clutter. You can even specify that a certain application always open in a specific quadrant, so youll always know right where it is.

Lower Power Consumption

ToC monitors (T240, T260) are designed to be extremely efficient, and use up to a third less power than other monitors in their class. And the unique SoftPower off function lets you put it in standy mode right away, using just 0.3W.
Integrated USB Hub and HDMI Connection The ToC will become the center of your life. An integrated USB hub and HDMI connection let you connect all your digital devices, including HD gaming consoles (T240, T260).

SyncMaster T200HD/T220HD

LCD Monitor

User Manual

Safety Instructions

Notational

Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Otherwise, it may result in death or personal injury. Otherwise, it may result in personal injury or property damage.

Notational Conventions

Prohibited
Important to read and understand at all times Disconnect the plug from the outlet Ground to prevent an electric shock

Do not disassemble

Do not touch
When not used for extended period of time, set your computer to DPM. If using screen saver, set it to active screen mode. The images here are for reference only, and are not applicable in all cases (or countries). Shortcut to Anti-Afterimage Instructions Do not use a damaged power cord or plug or a damaged or loose power outlet. Otherwise, this may result in electric shock or fire.
Do not touch the power plug with wet hands when removing or plugging the plug into the outlet. Otherwise, this may result in electric shock. Make sure to connect the power cord to a grounded power outlet. Otherwise, it may result in electric shock or personal injury.
Ensure that the power plug is plugged into the power outlet firmly and correctly. Otherwise, this may result in fire.
Do not forcefully bend or pull the power plug and do not place any heavy material on it. Otherwise, this may result in fire. Do not connect multiple appliances to the same power outlet. Otherwise, this may cause fire due to overheating.
Do not disconnect the power cord while using the product. Otherwise, this may result in damage to the product due to electric shock.
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. This may cause electric shock or fire.
Use only the power cord provided by our company. Do not use the provided power cord of another product. Otherwise, this may result in fire or electric shock.

Installation

Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor. Do not drop the monitor when moving it. This may cause damage to the product or the person carrying it.
Ensure that at least two persons lift and move the product. Otherwise, it may be dropped and cause personal injury, and/or damage the product.
When installing the product in a cabinet or rack, make sure that the front end of the bottom of the product does not project out. Otherwise, it may fall or cause personal injury. Use a cabinet or rack of a size appropriate to the product.
DO NOT PLACE CANDLES, MOSQUITO REPELLANT, CIGARETTES AND ANY HEATING APPLIANCES NEAR THE PRODUCT. Otherwise, this may result in fire.
Keep heating appliances as far away from the power cord or the product as possible. Otherwise, this may result in electric shock or fire.
Do not install it in a badly ventilated location such as a bookcase or closet. Otherwise, this may result in fire due to an increase in the internal temperature. Put down the monitor carefully. Failing to do so may damage the monitor.
Do not place the front of the product on the floor. Otherwise, this may result in damage to the screen display.
Ensure that an authorized installation company installs the wall mount. Otherwise, it may fall and cause personal injury. Make sure to install the specified wall mount.
Install your product in a well ventilated location. Ensure that there is a clearance of more than 10 cm from the wall. Otherwise, it may result in fire due to an increase in the internal temperature.
Bend the outdoor antenna cable downwards at the location where it goes in so that rainwater does not flow in. If rainwater enters the product, it may result in electric shock or fire. Install the antenna far away from any high voltage cables. If the antenna touches or falls onto a high voltage cable, it may result in electric shock or fire. Ensure that the packaging vinyl is kept away from children. Otherwise, it may result in serious harm (suffocation) if children play with it.
If the height of your monitor is adjustable, do not place any object or part of your body on the stand when lowering it. This may cause damage to the product or the person carrying it.

If thunder or lightening is occurring, do not touch the power cord or antenna cable. Otherwise, this may result in electric shock or fire.
Do not try to move the monitor by pulling only the wire or the signal cable. Otherwise, it may fall and result in electric shock, damage to the product or fire due to damage to the cable.
Do not lift or move the product back and forwards or right and left while only holding the power cord or signal cables. Otherwise, it may fall and result in electric shock, damage to the product or fire due to damage to the cable.
Make sure that the ventilating opening is not blocked by a table or curtain. Otherwise, it may result in fire due to an increase in the internal temperature.
Do not place any containers containing water, vases, flowerpots, medicines as well as any metal on the product. If water or a foreign material enters the product, disconnect the power cord and contact a Service Center. This may result in a product malfunction, electric shock, or fire.
Do not use or keep combustible spray or flammable material near the product. Otherwise, this may result in an explosion or fire.
Do not insert any metal, such as chopsticks, coins, pins and steel, or flammable objects, such as matches or paper, inside the product (through the ventilating openings, input and output terminals, etc). If water or foreign material enters the product, disconnect the power cord and contact a Service Center. Otherwise, this may result in electric shock or fire.
When using a fixed screen for a long time, an afterimage or stain may occur. If you are not using your product for a long period of time, put it into sleep mode or use a moving screen saver. Set a resolution and frequency appropriate to the product. Otherwise, your eyesight may be damaged.
When using headphones or earphones, do not turn the volume too high. Having the sound too loud may damage your hearing.
If you continually move closer to the product screen, your eyesight may be failing.
To ease eye strain, take at least a five-minute break after every hour of using the monitor.
Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations. Otherwise, it may fall and cause personal injury and/or damage the product. If you use the product in a location exposed to vibrations, it may damage the product and result in fire.
When moving the product, turn the power off and disconnect the power plug, antenna cable, and all the cables connected to the product. Otherwise, it may result in electric shock or fire.
Ensure that children do not hang onto the product or climb up onto the product. The product may fall and cause personal injury or death.

Use this button for turning the product on and off.
Note The button to the right of the monitor are touch-sensitive buttons. Touch a button lightly with your finger. Power indicator This light is lit when operating normally, and blinks once when your adjustments are saved. Note See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when leaving it unattended for long periods. Speaker
Note The configuration at the back of the product may vary from product to product.
POWER POWER Connect the power cord for your monitor to the POWER port on the back of the product.
PC Connect the PC terminal at the back of your monitor to your computer.
HDMI/PC/DVI-D AUDIO IN DIGITAL AUDIO OUT(OPTICAL) EX-LINK HDMI/PC/DVI-D AUDIO IN Connect the [ HDMI/PC/DVI-D AUDIO IN ] terminal at the back of your product to your computers sound card. DIGITAL AUDIO OUT(OPTICAL) Connect the [DIGITAL AUDIO OUT(OPTICAL)] terminal of your product to the digital sound output or standard sound output terminal of the DVD home theater (or amplifier) using a digital audio optical output cable. EX-LINK This is a reserved terminal used for servicing. SERVICE SERVICE This is a reserved terminal used for servicing.
DVI-D DVI-D Connect the DVI cable to the DVI-D port on the back of your product.

Kensington Lock

The Kensington Lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use. The locking device has to be purchased separately. Note The location of the Kensington Lock may be different depending on its model.
Using the Anti-Theft Kensington Lock
1. Insert the locking device into the Kensington slot on the Monitor ( locking direction ( 2. 3. HDMI IN 1 HDMI IN 1 Connect the [HDMI IN 1] terminal at the back of your monitor to the HDMI terminal of your digital output device using a HDMI cable. ). ) and turn it in the
Connect the Kensington Lock cable. Fix the Kensington Lock to a desk or a heavy stationary object.
COMPONENT IN R - AUDIO - L Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [ R - AUDIO - L] port of the product. PR, PB,Y Connect the VIDEO OUT port of the DVD / DTV Set-Top Box to the [ PR, PB,Y ] input ports using a component video cable ( PR, PB,Y ). ANT IN
Connect the CATV cable or TV antenna cable to the "ANT IN" port on the rear side of the product. Make sure to use a TV antenna cable (sold separately) as the antenna cable.

10. You have finished setting up your monitor. Execute X-Window after setting other requested hardware.
Natural Color Natural Color Software Program
One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor. The Natural Color S/W is the very solution for this problem. It is a color administration system developed by Samsung Electronics in association with Korea Electronics & Telecommunications Research Institute (ETRI). This system is available only for Samsung monitors and makes the color of the images on the monitor the same as the printed or scanned images. For more information, refer to Help (F1) in the software program.
How to install the Natural Color software
Insert the CD included with the Samsung monitor into the CD-ROM Drive. Then, the initial screen of the program Natural Color will be executed. Click Natural Color on the initial screen to install the Natural Color software. To install the program manually, insert the CD included with the Samsung monitor into the CD-ROM Drive, click the [Start] button of Windows and then select [Run.]. Enter D:\color\NCProSetup.exe and then press the [Enter] key. (If the drive where the CD is inserted is not D:\, enter the applicable drive.)
How to delete the Natural Color software program
Select "Setting/Control Panel" on the "Start" menu and then double-click "Add/Delete a program". Select Natural Color from the list and then click the "Add/Delete" button.

Adjusting the Monitor

Picture Available Modes
PC / DVI TV Component HDMI Note The default setting may be different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution.
Picture : PC / DVI MagicBright
MagicBright is a feature providing optimum viewing environment depending on the contents of the image you are watching. Currently five different modes are available: Entertain, Internet, Text, Dynamic Contrast and Custom. Each mode has its own pre-configured brightness value. Entertain High Brightness For watching motion pictures such as a DVD or VCD Internet For working with a mixture of images such as texts and graphics. Text For documents or works involving heavy text. Dynamic Contrast

Adjusting the Monitor Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast. Custom Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste. If this is the case, adjust the Brightness and Contrast by using the OSD menu. MENU , MENU,EXIT
Contrast / Brightness / Sharpness
(Not available in MagicBright mode of Dynamic Contrast.)
You can use the on-screen menus to change the contrast and brightness according to personal preference. Contrast : Adjust the Contrast. Brightness : Adjust the Brightness. Sharpness : Adjust the Sharpness. , , , , MENU,EXIT

Auto Adjustment

The values of Fine, Coarse and Position are adjusted automatically.
Adjusting the Monitor By changing the resolution in the control panel, auto function is performed. (Available in PC Mode Only) MENU , MENU,EXIT
Screen : (Available in PC mode only) - Coarse / Fine
Coarse Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu.
Fine Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed).

MENU,EXIT

- Position
Adjusts the screen location horizontally and vertically. MENU , , , , , MENU,EXIT

- Image Reset

Image parameters are replaced with the factory default values. MENU , , MENU,EXIT

- Resolution

Displays the resolution set on the PC.
Picture Options - Color Tone
Adjusting the Monitor The tone of the color can be changed. (Available in PC / DVI mode only) Cool / Normal / Warm / Custom MENU , , MENU,EXIT
- R-Gain / G-Gain / B-Gain
Adjusts the individual R, G, B color controls. MENU , , , , , MENU,EXIT

- Size

You can switch the Size. Wide / 4:3 MENU , , , MENU,EXIT
Picture parameters are replaced with the factory default values. OK Cancel , , MENU,EXIT
Picture : TV / Component / HDMI Mode
The Monitor has three automatic picture settings ("Dynamic", "Standard", and "Movie") that are preset at the factory. You can activate either Dynamic, Standard, or Movie. Dynamic Selects the picture for high-definition in a bright room. Standard Selects the picture for optimum display in a normal environment. Movie Selects the picture for viewing movies in a dark room.
Backlight / Contrast / Brightness / Sharpness / Color / Tint
You can use the on-screen menus to change the contrast and brightness according to personal preference. Backlight : Adjust the screen brightness by adjusting the LCD backlight. Contrast : Adjust the Contrast. Brightness : Adjust the Brightness. Sharpness : Adjust the Sharpness. Color : Adjusts the picture color. Tint : Adds a natural tone to the display. , , , , MENU,EXIT

The tone of the color can be changed. Cool1 / Cool2 / Normal / Warm1 / Warm2
Note Warm1 or Warm2 is only activated when the picture mode is Movie. Settings can be adjusted and stored for each external device you have connected to an input of the TV. MENU , , MENU,EXIT
You can switch the Size. The direct button on the remote control is 'P.SIZE' button. Wide - A full screen is displayed regardless of the screen aspect ratio of the input signals. 16:9 - Sets the picture to 16:9 wide mode. Zoom1 - Magnifies the size of the picture on the screen. Zoom 2 - Magnifies the size of the picture more than Zoom1. Wide Fit - Enlarges the aspect ratio of the picture to fit the entire screen. 4:3 - Sets the picture to 4:3 normal mode. Just Scan - Use the function to see the full image without any cut off when HDMI (480i / 1080i), Component (480i / 1080i) or DTV(480i / 1080i) signals are input. ( Wide Fit and Just Scan are only operated in HDMI mode.) MENU , , , MENU,EXIT

- Digital NR

Digital Noise Reduction. If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. Off - Turns the screen noise reduction function off. Low - Reduces screen noise at a low level. Medium - Reduces screen noise at a medium level. High - Reduces screen noise at a high level. Auto - Automatically recognizes and reduces screen noise. MENU , , , MENU,EXIT

- HDMI Black Level

When a DVD or set-top box is connected to your TV via HDMI, it may cause a degradation in the screen quality, such as an increase in the black level, a low contrast, or discoloration, etc., depending on the external device connected. In this case, adjust the screen quality of your TV by configuring the HDMI Black Level. This function is active only when the an external device (DVD player, STB etc.) is connected to the TV via HDMI(RGB Signal). (Available in HDMI Mode Only) Normal / Low

- Film Mode

The Film Mode feature offers you a theater-quality viewing experience. Film mode is supported in TV, Component (480i / 1080i) and HDMI (480i / 1080i) Off / Auto MENU , , , MENU,EXIT

Sound Available Modes

PC / DVI TV

Adjusting the Monitor

Component HDMI Note
The default setting may different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution.
The Monitor has a built-in high fidelity stereo amplifier. Standard Choose Standard for the standard factory settings. Music Choose Music when watching music videos or concerts. Movie Choose Movie when viewing movies. Speech Choose Speech when watching a show that is mostly dialogue (i.e., news). Custom Choose Custom if you want to adjust the settings according to personal preference. MENU , , MENU,EXIT

You can set the monitor to be turned on or off automatically at a specified time. Note Setting the clock is necessary in order to use the various timer features of the product. Three different On/Off Timer Settings can be made. MENU , , , , , , MENU,EXIT

V-Chip

Protects children from viewing inappropriate programs by blocking certain broadcast or AV programs. (More Information) Parental restriction levels differ depending on the broadcasting station. The default menu name and Downloadable US rating change depending on the downloaded information.
Adjusting the Monitor Even if you set the On-screen display to your desired language, the"Downloadable U.S. Rating" menu will appear in English only. The rating will automatically block certain categories that are more restrictive. The rating titles(For example: Humor Level.etc) and TV ratings(For example:DH,MH,H.etc) may differ depending on the broadcasting station. If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 : Power Off Mute 4 Power On.

V-Chip Lock

Off / On , , **** , MENU,EXIT

TV Parental Guidelines

****

MPAA Rating

Canadian-English

Canadian-French

Downloadable U.S. Rating

Change PIN

********

Caption

Enables or disables the Caption feature and sets the appearance of closed caption text.
Adjusting the Monitor Off / On MENU , , , MENU,EXIT

Caption Mode

The Defaultis CC1. CC1 : The Primary Synchronous Caption Service. These are captions in the primary language that must be in sync with the sound, preferably matched to a specific frame.
CC2 : The Special Non-Synchronous Use Captions. This channel carries data that is intended to augment information carried in the program.
CC3 : Secondary Synchronous Caption Service. Alternate program-related caption data, typically second language captions.
CC4 : Special Non-Synchronous Use Captions. Similar to CC2. Text1 : First Text Service. This may be various non-program related data. Text2 : Second Text Service. Additional data, usually not program related. Text3 / Text4 : Third and Fourth Text Services. These data channels should be used only if Text1 and Text2 are not sufficient.

Digital Caption Options

Size Default, Smart, Standard, Large
Font Style Default, Style0, Style1, Style2, Style3, Style4, Style5, Style6, Style7

Q: A: Q: A: Q: A: A: Q: A:
3. Problems related to Audio
Note Problems related to audio signals and their solutions are listed below. Q: A: A: Q: A: A: No sound Ensure that the audio cable is firmly connected to both the audio-in port on your monitor and the audio-out port on your sound card.(Refer to the Connecting the monitor) Check the volume level.(Refer to the Volume) The sound level is too low. Check the volume level.(Refer to the Volume) If the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card or software program.
4. Problems related to Remote Control
Note Problems related to the remote control and their solutions are listed. Q: A: A: A: The remote control buttons do not respond. Check the battery polarities (+/-). Check if the batteries have been exhausted. Check if the power is on.
Troubleshooting A: A: Check if the power cord is securely connected. Check if a special fluorescent or neon lamp is on in the vicinity
5. You may see small particles if you look closely at the edge of the bezel surrounding the screen.
This is part of the products design and is not a defect.

Q&A

Q: A: A: Q: A: How can I change the frequency? The frequency can be changed by reconfiguring the video card. Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) How can I adjusts the resolution? Windows XP: Set the resolution in the Control Panel Appearance and Themes Display Settings. A: Windows ME/2000: Set the resolution in the Control Panel Display Settings. * Contact the video card manufacturer for details. Q: A: How can I set the Power Saving function? Windows XP: Set the resolution in the Control Panel Appearance and Themes Display Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). A: Windows ME/2000: Set the resolution at the Control Panel Display Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). Q: A: How can I clean the outer case/LCD Panel? Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning solution or plain water. Do not leave any detergent or scratches on the case. Do not let any water enter the monitor. Q: A: What are the benefits of digital broadcasting? Digital TV broadcasting generates less noise and provides clearer visuals and sound than analog TV broadcasting does. As services develop, you can also enjoy various information services because various kinds of data besides video and audio can be sent. For example, while watching a sports game, you can view various data on your favorite player or you can view all or selected screens which have been captured from different angles for a

Troubleshooting specific scene. In addition, you can retrive information on a previous story or drama or you can buy home shopping products such as an accessory currently on TV. Digital TV broadcasting allows you to easily access various information services in your home creating a more information-oriented home. Q: A: A: What is the difference between HDTV and SDTV? There are various types of digital TVs. The most widely known types of digital TV are HDTV and SDTV. They are classified according to the screen quality and the video specifications. A: HDTV (High Definition TV): High screen quality, very clear TV. SDTV (Standard Definition TV): Common standard digital TV.
An SDTV has an aspect ratio of 4:3 which is the same as that of an analog TV. SDTV has an aspect ratio of 16:9 which is similar to a cinema screen. This provides a much better screen quality than SDTV. It's like having a theater in your home. Digital TV broadcasting in our country is ultimately orientated towards HDTV. Can I watch HD broadcasting with all digital TVs? You can receive all digital broadcasts, whether they are SD or HD, using any digital TV. However, you cannot enjoy HD programs, which are the highest quality digital TV programs, using an SD digital TV. Especially, as SD broadcasting has an aspect ratio of 4:3, HD broadcasting has an aspect ratio of 16:9, similar to a cinema screen. Therefore, to enjoy the full benefits of digital TV, it is better to purchase an HD digital TV. (At present, all digital TVs from Samsung Electronics have the 16:9 wide aspect ratio.)

A: Q: A:

Q: A: A: Q: A: A: Q: A: A:
Can I watch digital TV broadcasting with an analog TV? No. The analog TV cannot interpret digital signals. Therefore, a digital TV is required to watch digital TV broadcasting. Can I use my present antenna to receive digital broadcasting? As for existing analog TV, digital TV is designed so that digital broadcasting signals are received via both indoor and outdoor antennas. If signal reception is very good in your environment, you can watch digital broadcasts with your existing indoor antenna. If not, it is better to install an outdoor UHF antenna. How do I connect an antenna for an apartment or tenement house? Consult the superintendent's office or broadcasting facility administrator for your apartment or tenement house to check whether UHF reception is available. Even if digital TV broadcasting is available in your area, if you cannot watch it because the superintendent's office or common broadcasting facility does not rebroadcast the signal, you have to install an indoor or outdoor antenna. Alternatively, your local cable broadcasting company provides a digital TV service, and you can subscribe to it.
Troubleshooting A: If a cable broadcasting company is sharing a common broadcasting facility for your apartment or tenement house, it has to adjust and send digital TV signals so that they are compatible to shared viewing which is the original purpose of the common broadcasting facility.

Input Signal, Terminated RGB Analog, DVI(Digital Visual Interface) 0.7 Vp-p 5 % separate H/V sync, Composite TTL level (V high 2.0 V, V low 0.8 V) Maximum Pixel Clock 146.250 MHz (Analog, Digital) Power Supply AC 100 - 240 V~ (+/- 10 %), 50/60 Hz 3 Hz Signal Cable 15pin - to - 15pin D-sub cable, Detachable DVI-D to DVI-D connector, Detachable Dimensions (W x H x D) / Weight 520 x 373.5 x 86.5 mm / 20.5 X 14.7 X 3.4 inch (Without Stand) 520 x 441.5 x 215 mm / 20.5 X 17.4 X 8.5 inch (With Stand) / 6.2 kg / 13.7 Ibs Environmental considerations Operating Temperature : 50 F ~ 104 F (10 C ~ 40 C) Humidity : 10 % ~ 80 %, non-condensing Storage Temperature : -4 F ~ 113 F (-20 C ~ 45 C) Humidity : 5 % ~ 95 %, non-condensing Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the computer systems will provide the best operating conditions and monitor
Plug and Play Capability settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems. For example, the number of TFT-LCD sub pixels contained in this product are 5,292,000. Note Design and specifications are subject to change without prior notice. Class B Equipment (Information Communication equipment for residential use) This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your computer. Use the software utility installed on your computer to set up this feature. State Power Indicator Normal Operation Power saving mode Power off (Power button) EPA/ENERGY 2000 On Blinking Less than 2 watts Off Less than 1 watts

This screen is shown when This screen is shown when This screen is shown when scenes are captured using dig- scenes are converted to ana- scenes created via analog sigital broadcasting equipment log broadcasting signals benals are displayed while fore being sent. Humans and
Information and they are sent in HDTV objects appear heavier than in watching HDTV broadcast(16:9) mode. reality. ing. Note If temporary stops, mosaic screens, or jagged screens occur, this is not a TV problem. Contact your cable broadcasting company for a check-up. For information on how to connect and use your video, DVD, DVD combo, home theater, PC, etc., refer to their respective user manuals.
PRODUCT INFORMATION (Image Retention Free)
LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time. This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention. Warranty Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty. What is Image retention ? During normal operation of a LCD panel, pixel image retention doesn't occur. However, if the same image is displayed for a long time, a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal. This may cause the liquid crystal to build up in a certain areas of the display. Thus, the previous image is retained when switching to a new video image. All display products, including LCD, are subject to image retention. This is not a product defect. Please follow the suggestions below to protect your LCD from image retention.
Power Off, Screen Saver, or Power Save Mode Ex) Turn the power off when using a stationary pattern. Turn the power off for 4 hours after 20 hours in use Turn the power off for 2 hours after 12 hours in use
Use a Screen saver if possible Screen saver in one color or a moving image is recommended.
Set the Monitor to power off with the PC Display Properties Power Scheme. Suggestions for specific applications

Ex) Airports, Transit Stations, Stock Markets, Banks, and Controlling Systems We recommend that you follow set up of your display system program as below: Display Information together with Logo or Moving image cycle.
Information Ex) Cycle : Display Information for 1 hour followed by a Display Logo or moving image for 1 minute. Change the Color Information periodically (Use 2 different colors). Ex) Rotate the Color Information with 2 colors every 30 minutes.
Avoid using a combination of characters and background color with large difference in luminance. Avoid using Grey colors, which can cause Image retention easily. Avoid: Colors with big difference in luminance (Black & White, Grey) Ex)
Recommended settings: Bright colors with little difference in luminance Change the characters color and background color every 30 minutes Ex)
Every 30 minutes, change the characters with movement. Ex)
The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it.
Information Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video patterns. When the LCD panel is operated for a long time with a fixed pattern (-over 12 hours-), there may be slight difference in voltage between electrodes that work the liquid crystal (LC) in a pixel. The voltage difference between electrodes increases with time, forcing the liquid crystal to lean. When this occurs, the previous image may be seen when the pattern is changed. To prevent this, the accumulated voltage difference must be decreased.
Our LCD Monitor satisfies ISO13406-2 Pixel fault Class II

Appendix

Contact SAMSUNG WORLDWIDE
Note If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North America U.S.A CANADA MEXICO 1-800-SAMSUNG(726-7864) 1-800-SAMSUNG(726-7864) http://www.samsung.com http://www.samsung.com/ca

1800-10-SAMSUNG(726-7864) http://www.samsung.com/ph
Asia Pacific TAIWAN VIETNAM 0800-329-889 Middle East & Africa SOUTH AFRICA TURKEY U.A.E 0860-SAMSUNG(726-7864) 11 800-SAMSUNG(726-7864) 8000-4726 http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com/tw http://www.samsung.com
Sync Signal Sync (Synchronized) Signals refer to the standard signals that are required to display desired colors on the monitor. They are divided into Vertical and Horizontal Sync Signals. These signals display normal color images by the set resolution and frequency. Separate Composite

Types of Sync Signals

This is a scheme of transmitting individual vertical and hori sync signals to the monitor.
This is a scheme of combining vertical and horizontal syn nals into one composite signal and transmitting it to the mo The monitor displays the color signals by separating the co site signal into original color signals.

Dot Pitch

The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The distance between two dots of the same color is called the 'Dot Pitch'. Unit: mm The screen must be redrawn several times per second in order to create and display an image for the user. The frequency of this repetition per second is called the Vertical Frequency or Refresh Rate. Unit: Hz Example: If the same light repeats itself 60 times per second, this is regarded as 60 Hz.

Vertical Frequency

Horizontal Frequency
The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal Frequency. Unit: kHz Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non-Interlace method while showing odd lines and then even lines in turn is called the Interlace method. The Non-Interlace method is used for the majority of monitors to ensure a clear image. The Interlace method is the same as that used in TVs. This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange information automatically. This monitor follows the international standard VESA DDC for the Plug & Play function. The number of horizontal and vertical dots used to compose the screen image is called the 'resolution'. This number shows the ac-

Interlace Methods

Non-Interlace

Resolution

Appendix curacy of the display. A high resolution is good for performing multiple tasks as more image information can be shown on the screen. Example: If the resolution is 1680(1920) x 1050(1200), this means the screen is composed of 1680(1920) horizontal dots (horizontal resolution) and 1050(1200) vertical lines (vertical resolution). RF Cable Satellite Broadcasting Cable TV A round signal cable generally used for TV antennas. Balances the levels of the sound coming from each speaker in televisions with two speakers. Whereas the terrestrial broadcasting is delivered via frequency signals through the air, cable broadcasting is transmitted via a cable network. In order to view cable TV, one must purchase a cable receiver and hook it up to the cable network. "CATV" refers to the broadcasting service offered at hotels, schools and other buildings through their own broadcasting system, apart from VHF or UHF broadcasting by terrestrial broadcasters. The CATV programs may include movies, entertainment and educational programs. (Different from cable TV.) CATV can be viewed only within the area in which the CATV service is offered. VHF/UHF Channel Fine Tuning VHF indicates TV channels 2 to 13, and UHF indicates channels 14 through 69. This feature allows the viewer to fine-tune the TV channel to obtain the best viewing conditions. The Samsung LCD TV has both automatic and manual channel fine-tuning features to enable the viewer to adjust their desired settings. External device input refers to video input from such external video devices as VCRs, camcorders and DVD players, separate from a TV broadcast. A type of digital disk technology that takes up only the benefits of CD and LD, to implement a high resolution/quality, which enables the user to enjoy clearer images. An enhanced broadcasting technology to process digital video signals using a set-top box, which implements a high resolution and clearer digital images on the screen. This derives from artificial satellite technology that amplifies weak signals even in poor reception areas for sharper images. A connection part that is used to link a Wide antenna cable (feeder cable) to the TV. A kind of language selection feature that provides English subtitles (caption) or character information services from broadcasting services (ex: AFKN) or video tapes (marked CC), and which are especially useful for studying English. This enables the user to enjoy the broadcasting service in both Korean and foreign (original) language as well as in stereo mode.