Page 9

Note regarding the LENS
- Do not film with the camera lens pointing directly at the sun. Direct sunlight can damage the CCD(Charge Coupled Device).
Notes regarding electronic viewfinder
1. Do not position the camcorder such that the viewfinder is pointing towards the sun. Direct sunlight can damage the inside of the viewfinder. Be careful when placing the camcorder under sunlight or near a window exposed to sunlight.
Notes regarding Record or Playback using the LCD
1. The LCD display has been manufactured using high precision technology. However, there may be tiny dots (red, blue or green in colour) that appear on the LCD display. These dots are normal and do not affect the recorded picture in any way. 2. When you use the LCD display under direct sunlight or outdoors, it may be difficult to see the picture clearly. If this occurs, we recommend using the viewfinder. 3. Direct sunlight can damage the LCD monitor.
Notes regarding the hand strap
- To ensure a steady picture during filming, check that the hand strap is properly adjusted. - Do not force your hand into the hand strap as you could damage it.

Page 10

Precautions regarding the Lithium battery
1. The lithium battery maintains the clock function and user settings; even if the battery pack or AC adapter is removed. 2. The lithium battery for the camcorder lasts about 6 months under normal operation from time of installation. 3. When the lithium battery becomes weak or dead, the date/time indicator will display --- when you set the DATE/TIME to ON. When this occurs, replace the lithium battery with a new one(type CR2025). 4. There is a danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Warning: Keep the LITHIUM BATTERY out of reach of children. Should a battery be swallowed, consult a doctor immediately.

SERVICING

Do not attempt to service this CAMCORDER yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

REPLACEMENT PARTS

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer and having the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

Page 16

Rear & Bottom View
3. Memory Card slot (VP-D103(i)/D105(i) only) 4. Battery Release

1. Charging indicator

2. Hook for shoulder strap

5. Tripod receptacle

6. TAPE EJECT

Memory Card slot

1. Charging indicator 2. Hook for shoulder strap 3. Memory Card slot (VP-D103(i)/D105(i) only) 4. Battery Release 5. Tripod receptacle 6. TAPE EJECT

VP-D103(i)

Memory Stick

VP-D105(i)

Memory Stick Memory Stick PRO

SD/MMC

(Usable Memory card)

Page 17

Remote control (VP-D103(i)/D105(i) only)
1. PHOTO 2. START/STOP 3. SELF TIMER 4. ZERO MEMORY 5. PHOTO SEARCH 6. A.DUB 7. (FF) 8. (REW) 9. (PLAY) 10. Direction 18. DISPLAY 17. Zoom 16. X2 15. DATE/TIME 14. (SLOW) 13. (STILL) 12. (STOP) 11. F. ADV
1. PHOTO 2. START/STOP 3. SELF TIMER (see page 20) 4. ZERO MEMORY (see page 76) 5. PHOTO Search 6. A.DUB (see page 65) 7. 8. 9. (FF) (REW) (PLAY)
10. Direction ( , (see page 74)
11. F. ADV (see page 75) 12. 13. 14. (STOP) (STILL) (SLOW)
15. DATE/TIME 16. X2 (see page 75) 17. Zoom 18. Display 17

Page 18

OSD (On Screen Display in CAMERA and PLAYER modes)
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 18 Battery level (see page 26) Easy mode (see pages 61) DSE (Digital Special Effects) mode (see page 50) Program AE (see page 44) White Balance mode (see page 46) BLC (Back Light Compensation) (see page 63) Manual focus (see page 62) Shutter speed and EXPOSURE (see page 59) Zoom position (see page 47) NIGHT CAPTURE (see page 68) DATE/TIME (see page 55) USB (VP-D102D(i)/D103(i)/D105(i) only) WL. REMOTE (VP-D103(i)/D105(i) only) (see page 40) WIND CUT (see page 54) Audio recording mode (see page 53) Zero memory indicator (VP-D103(i)/D105(i) only) (see page 76) Remaining Tape (measured in minutes) Tape Counter Operating mode Record speed mode PHOTO mode Self recording and waiting timer (VP-D103(i)/D105(i) only) (see page 20) DIS (see page 49) Volume control (see page 35) Audio playback channel DV IN(DV data transfer mode) (VP-D101i/D102Di/D103i/D105i only) (see page 81) DEW (see page 7) Message Line PB DSE (see page 77) PB ZOOM/ENTER (see page 78) POWER NIGHT CAPTURE (see page 69) Tele MACRO (see page 47)

a. SAVE

b. REC
00743E VP-D103(i)-UK (28~61)

Page 28

Basic Recording
Making your First Recording
1. Connect a Power source to the camcorder. (see page 23) (A battery pack or a AC power adapter) I Insert a cassette. (see page 27) 2. Remove the LENS CAP. 3. Set the power switch to the CAMERA position. I Open the LCD monitor. I Set the mode switch to the TAPE position. (VP-D103(i)/D105(i) only) Make sure that STBY is displayed. I If the protection tab of the cassette is open, STOP and PROTECTION! will be displayed. I Make sure the image you want to record appears in the LCD monitor or viewfinder. I Make sure the battery level indicates that there is enough remaining power for your expected recording time. 4. To start recording, press the START/STOP button. I REC is displayed in the LCD. To stop recording, press the START/STOP button again. I STBY is displayed in the LCD.

Page 29

Selecting the OSD LANGUAGE
Select the appropriate OSD Language among English, French, German, Spanish, Iitalian, Polish and Dutch. The Language Function works in CAMERA, PLAYER, M.REC, M.PLAY modes.
CAM MODE INITIAL CAMERA A/V MEMORY VIEWER CLOCK SET WL. REMOTE BEEP SOUND SHUT. SOUND LANGUAGE DEMO
1. Press the MENU button. I The menu list will appear. 2. Turn the MENU DIAL to highlight INITIAL and press the ENTER button. 3. Select LANGUAGE from the sub-menu and ENTER button. 4. Using the MENU DIAL, select the LANGUAGE and press the ENTER button. I Press the ENTER button to confirm the OSD LANGUAGE. 5. To exit, press the MENU button. I The OSD changes to the selected language.
CAM MODE INITIAL SET CLOCK SET WL.REMOTE BEEP SOUND SHUT. SOUND LANGUAGE DEMONSTRATION
CAM MODE INITIAL SET LANGUAGE ENGLISH DEUTSCH ITALIANO POLSKI NEDERLANDS
LANGUAGE is always indicated in ENGLISH.

Page 30

When a cassette is loaded and the camcorder is left in the STBY mode for more than 5 minutes without being used, it will switch off automatically. To use it again, push the START/STOP button or set the Power switch to OFF and then back to CAMERA. This Auto Power OFF feature is designed to save battery power.
Record Search (REC SEARCH) You can view a recording using the REC SEARCH +, -- function in STBY mode. REC SEARCH -- enables you to play the recording backwards and REC SEARCH + enables you to play it forwards, for as long as you keep each button pressed down.
If you press the REC SEARCH -- button in STBY mode, your camcorder will play

REC SEARCH

in reverse for 3 seconds and return to the original position automatically.
Note Mosaic shaped distortion may appear on the screen while in Record Search mode.

Page 44

G PROGRAM AE
The PROGRAM AE function works in CAMERA mode only. The PROGRAM AE mode allows you to adjust shutter speeds and apertures to suit different recording conditions. They give you creative control over the depth of field. I AUTO mode - Auto balance between the subject and the background. - To be used in normal conditions. - The shutter speed automatically varies from 1/50 to 1/250 per second, depending on the scene. I SPORTS mode ( ) - For recording people or objects moving quickly. I PORTRAIT mode ( ) - For focusing on the background of the subject, when the background is out of focus. - The PORTRAIT mode is most effective when used outdoors. - The shutter speed automatically varies from 1/50 to 1/1000 per second. I SPOTLIGHT mode ( ) - For recording correctly when there is only light on the subject and not the rest of the picture. I SAND/SNOW mode ( ) - For recording when people or objects are darker than the background because of reflected light from sand or snow. I High S. SPEED(High Shutter Speed) mode ( ) - For recording fast-moving subjects such as players in golf or tennis games.

Page 45

Setting the PROGRAM AE 1. Press the MENU button. I The menu list will appear. 2. Turn the MENU DIAL to highlight CAMERA and press the ENTER button. 3. Select PROGRAM AE from the submenu. 4. Press the ENTER button to enter the sub-menu.
CAM MODE CAM MODE CAMERA SET PROGRAM AE AUTO SPORTS PORTRAIT SPOTLIGHT SAND / SNOW HIGH S. SPEED CAM MODE INITIAL CAMERA A/V MEMORY VIEWER PROGRAM AE WHT. BALANCE D.ZOOM DIS DSE SELECT
5. Using the MENU DIAL, select the PROGRAM AE mode. I Press the ENTER button to confirm the PROGRAM AE mode. 6. To exit, press the MENU button.
CAMERA SET PROGRAM AE WHT. BALANCE D.ZOOM DIS DSE SELECT
While setting the NIGHT CAPTURE to ON, the PROGRAM AE function does not work. The PROGRAM AE function will not operate in EASY mode.

Page 46

G WHT. BALANCE (WHITE BALANCE)
The WHITE BALANCE function works in CAMERA or M.REC mode only. The WHITE BALANCE is a recording function that preserves the unique image colour of the object in any recording condition. You may select the appropriate WHITE BALANCE mode to obtain good quality image colour. I AUTO ( ) : This mode is generally used to control the WHITE BALANCE automatically. I HOLD ( ) :This fixes the current WHITE BALANCE value. I INDOOR ( ) : This controls the WHITE BALANCE according to the indoor ambience. - Under halogen or studio/video lighting - Subject is of one dominant colour CAM MODE - Close ups INITIAL I OUTDOOR ( ) : This controls the WHITE BALANCE according to the outdoor ambience. PROGRAM AE CAMERA WHT. BALANCE A/V - In daylight, especially for close up and where the subject is of one dominant colour. MEMORY D.ZOOM

Page 53

G AUDIO MODE The AUDIO MODE function works in CAMERA and PLAYER (VP-D101i/D102Di/D103i/D105i only) modes. This camcorder records sound in two ways. (12bit, 16bit) I 12bit : You can record two 12bit stereo sound tracks. The original stereo sound can be recorded onto the MAIN (SOUND1) track. Additional stereo sound can be dubbed onto the SUB (SOUND2) track. I 16bit : You can record one high quality stereo sound using the 16bit recording mode. Audio dubbing is not possible when using this mode. 1. Set the camcorder to CAMERA mode. 2. Press the MENU button. I The menu list will appear. 3. Turn the MENU DIAL to highlight A/V and press the ENTER button. 4. Select the AUDIO MODE from the menu and press the ENTER button. I The AUDIO MODE toggles between 12bit-16bit with each push. 5. To exit, press the MENU button.
REC MODE PHOTO SEARCH COPY AUDIO MODE 12 AUDIO SELECT WIND CUT PB DSE AV IN/OUT OUT

Page 54

G WIND CUT The WIND CUT function works in CAMERA and PLAYER (Audio dubbing) modes. The WIND CUT function minimizes wind noise or other noise while recording. - When the wind cut is on, some low sounds are eliminated along with the sound of the wind. 1. Set the camcorder to CAMERA mode. 2. Press the MENU button. I The menu list will appear. 3. Turn the MENU DIAL to highlight A/V and press the ENTER button. 4. Select WIND CUT from submenu. 5. This feature toggles ON/OFF each time you press the ENTER button. I is shown in the display when you turn the WIND CUT on. 6. To exit, press the MENU button.
Make sure WIND CUT is set to off when you want the microphone to be as sensitive as possible. Use the WIND CUT when recording in windy places such as the beach or near buildings.

Page 55

G DATE/TIME The DATE/TIME function works in CAMERA, PLAYER, M.REC and M.PLAY modes. The date and time are automatically recorded on a special data area of the tape. 1. Press the MENU button. I The menu list will appear. 2. Turn the MENU DIAL to highlight VIEWER and press the ENTER button. 3. Turn the MENU DIAL to highlight DATE/TIME. 4. Press the ENTER button to select the sub-menu. 5. Using the MENU DIAL, select the DATE/TIME mode. I You can choose to display - the OFF, DATE, TIME, DATE/TIME - OFF only - DATE only - TIME only - DATE & TIME I To return to the previous menu, highlight the DATE/TIME in the middle of OSD and press the ENTER button. 6. To exit, press the MENU button.

MIRROR

12:00 10. J A N. 0 4

Page 58

I WHT. BALANCE (see page 46)
- Each time you select WHT. BALANCE and press the ENTER button, you can choose between preset WHT.BALANCE values and AUTO. As in PROGRAM AE, you can't choose between Auto and WHT.BALANCE values it they have not been preset.
I FOCUS (Auto Focus/Manual Focus) (see page 62)
- Each time you select FOCUS and press the ENTER button, the FOCUS is switched to either Manual Focus (MF) or Auto Focus ( ).
I SHUTTER SPEED & EXPOSURE
- You can set values for SHUTTER SPEED and EXPOSURE by selecting ( For more information, see the next page. Setting the Quick menu 1. Set the camcorder to CAMERA mode. 2. Turn the MENU DIAL to select a function you want and then press the ENTER button to change the values.
) icon and pressing the ENTER button.
Quick menu function will not operate in EASY mode. If you are using the M.FOCUS(MF) function, you cannot use the Quick menu. If you want to use the Quick menu function, release the M.FOCUS(MF) mode.
DSE PROGRAM AE WHT. BALANCE FOCUS SHUTTTER EXPOSURE

0:00:00

SHUTTER EXPOSURE 12:00 10.JAN.2004
WL.REMOTE (VP-D103(i)/D105(i) only) DATE/TIME

Page 59

SHUTTER SPEED & EXPOSURE You can set SHUTTER SPEED only in CAMERA mode. The EXPOSURE function works in both CAMERA and M.REC modes. SHUTTER SPEED and EXPOSURE values can only be set in the Quick Menu. SHUTTER SPEED and EXPOSURE are automatically switched and/or deactivated. 1. Set the power switch to CAMERA mode. 2. Turn the MENU DIAL until you see the ( ) icon, and then press the ENTER button. I You see a screen on which you can select SHUTTER SPEED and EXPOSURE. I Turn the MENU DIAL to select the item you want and then press the ENTER button. I SHUTTER SPEED can be set to 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000 or 1/10000. I EXPOSURE can be set between 00 and 29. 3. To exit from the setting screen, select the icon( ) and press the ENTER button.
Recommended Shutter speeds when recording Outdoor sports such as golf or tennis : 1/2000 or 1/4000. Moving cars or trains or other rapidly moving vehicles such as roller coasters : 1/1000, 1/500 or 1/250 Indoor sports such as basketball : 1/120 Notes

00743E VP-D103(i)-UK (62~110)

5/3/04 9:16 AM

Page 62
AF/MF (Auto Focus/Manual Focus)
The AF/MF function works in CAMERA, M.REC mode only. In most situations, it is better to use the automatic focus feature, as it enables you to concentrate on the creative side of your recording. Manual focusing may be necessary under certain conditions that make automatic focusing difficult and/or unreliable. a Auto Focusing If you are inexperienced in the use of camcorders, we recommend that you make use of Auto Focus. Manual Focusing In the following situations, you may obtain better results by adjusting the focus manually. a. A picture containing several objects, some close to the camcorder, others further away. b. A person enveloped in fog or surrounded by snow. c. Very shiny or glossy surfaces like a car. d. People or objects moving constantly or quickly like an athlete or a crowd. Set the power switch to CAMERA mode. Turn the MENU DIAL and select the FOCUS menu. Press the ENTER button. Turn the MENU DIAL up or down until the object is in focus. I Zoom out a little if focusing is difficult. 5. To return to AF(Auto Focus: ), press the ENTER button again. 1. 2. 3 4. c d b

STBY 0:00:3 min

M. FOCUS

10. J A N. 0 4

Page 63
BLC (Back Light Compensation)
BLC works in CAMERA/M.REC mode. Back lighting exists when the subject is darker than the background: I The subject is in front of a window. I The person to be recorded is wearing white or shiny clothes and is placed against a bright background; the persons face is too dark to distinguish his/her features. I The subject is outdoors and the background is overcast. I The light sources are too bright. I The subject is against a snowy background. 1. Set the power switch to CAMERA mode. 2. Press the BLC button. I Normal - BLC - Normal I BLC enhances the subject.

* BLC off

* BLC on
When NIGHT CAPTURE to set to ON, the BLC function does not work. The BLC function will not operate in EASY mode.

Page 64

Fade In and Out
The FADE function works in CAMERA mode only. You can give your recording a professional look by using special effects such as fade in at the beginning of a sequence or fade out at the end of a sequence.

STBY 0:00:00

To Start Recording 1. Before recording, hold down the FADE button. The picture and sound gradually disappear (fade out). 2. Press the START/STOP button and at the same time release the FADE button. Recording starts and the picture and sound gradually appear (fade in). To Stop Recording (use FADE IN / FADE OUT) 3. When you wish to stop recording, hold down the FADE button. The picture and sound gradually disappear (fade out). 4. When the picture has disappeared, press the START/STOP button to stop recording. a. FADE OUT (Approx. 4 seconds)

PLAYER MODE

3. Press the ENTER button to enter the sub-menu. 4. Use the MENU DIAL to select AUDIO SELECT from the submenu. 5. Press the ENTER button to enter the sub-menu. 6. Using the MENU DIAL, select the AUDIO playback channel. I Press the ENTER button to confirm the audio playback channel. - SOUND1 : play the original sound. - SOUND2 : play the dubbed sound. - MIX(1+2) : play back SOUND1 and 2 equally mixed. 7. To exit, press the MENU button. 8. Press the Note When you playback added sound (SOUND2 or MIX mode), you may experience loss of sound quality. (PLAY/STILL) button to playback the dubbed tape.
A / V SET REC MODE PHOTO SEARCH PHOTO COPY AUDIO MODE AUDIO SELECT WIND CUT PB DSE AV IN/OUT
PLAYER MODE A / V SET AUDIO SELECT SOUND [ 1 ] SOUND [ 2 ] MIX [ 1 + 2 ]

Page 67

PHOTO Image Recording
1. Set the power switch to CAMERA mode. 2. Press the PHOTO button. I The still picture is recorded for about 6~7 seconds. 3. After the PHOTO has been recorded, the camcorder returns to STBY mode. Searching for a PHOTO picture The PHOTO SEARCH works in PLAYER mode only. 1. Press the MENU button. I The MENU list will appear. 2. Turn the MENU DIAL to highlight A/V. 3. Press the ENTER button to enter the sub-menu.
PLAYER MODE INITIAL CAMERA A/V MEMORY VIEWER
4. Select PHOTO SEARCH from the sub-menu and press the ENTER button. I You can also press the PHOTO SEARCH button on the remote control. (VP-D103(i)/D105(i) only) 5. Search the PHOTO using the (FF) and (REW) buttons. I The PHOTO search process appears on the LCD while you are searching. I After completing the search, the camcorder displays the still image. 6. To exit, press the (STOP) button.

Page 68

NIGHT CAPTURE (0 lux recording)

POWER NIGHT CAPTURE

The NIGHT CAPTURE function works in CAMERA/M.REC mode. The NIGHT CAPTURE function enables you to record a subject in darkness. 1. Set the camcorder to CAMERA mode. 2. Slide the NIGHT CAPTURE switch to ON. I (NIGHT CAPTURE indicator) appears on the LCD monitor. I The infrared(invisible rays) light is turned on automatically. 3. To cancel the NIGHT CAPTURE function, slide the NIGHT CAPTURE switch to OFF.

STBY 0:00:0 min

The maximum recording distance using the infrared light is about 3 m (about 10 feet). If you use the NIGHT CAPTURE function in normal recording situations (ex. outdoors by day), the recorded picture may be tinted green. In the NIGHT CAPTURE mode, certain functions are not available, such as White Balance, Program AE, DSE, BLC. If focusing is difficult with the auto focus mode when using the NIGHT CAPTURE function, focus manually. Do not cover the Infrared Light with the hand.

Page 73

Connecting to a TV which has no Audio and Video input jacks You can connect your camcorder to a TV through a VCR. 1. Connect the camcorder and VCR with the AUDIO/VIDEO cable. I The yellow plug : Video I The white plug : Audio(L) - Mono I The red plug : Audio(R) 2. Connect a TV to the VCR. 3. Set the power switch on the camcorder to PLAYER mode. 4. Turn on both the TV and VCR. I Set the input selector on the VCR to LINE. I Select the channel reserved for your VCR on the TV set. 5. Play the tape. Playback You can play the recorded tape in PLAYER mode. 1. Connect a power source and set the power switch to PLAYER mode. 2. Insert the tape you wish to play back. 3. Using the (FF) and (REW) buttons, find the first position you wish to play back. 4. Press the (PLAY/STILL) button. I The images you recorded will appear on the TV after a few seconds. I If a tape reaches its end while being played back, the tape will rewind automatically. Note

S-VIDEO VCR

VIDEO AUDIO(L) AUDIO(R)

USB DV AUDIO /VIDEO

Audio/Video

TV S-VIDEO

ANTENNA

CAMCORDER

The playback mode (SP/LP) is selected automatically.

Page 74

Various Functions while in PLAYER mode
The PLAY/STILL, STOP, FF, REW buttons are located on the camcorder and the Remote Control. The F.ADV(Frame advance), X2, SLOW buttons are located on the Remote Control only. (VP-D103(i)/D105(i) only) To prevent tape and head-drum wear, your camcorder will automatically stop if it is left in STILL or SLOW modes for more than 5 minutes. Playback pause Press the
(PLAY/STILL) button during Playback. (PLAY/STILL) button.
EASY REC SEARCH FWD FADE S.SHOW BLC MULTI DISP.
To resume playback, press the
Picture search (Forward/Reverse) Press the (FF) or (REW) buttons during Playback or Still mode. To resume normal playback, press the (PLAY/STILL) button. Keep pressing (FF) or (REW) buttons during Playback or Still mode. To resume normal playback, release the button.
Slow playback (Forward/Reverse) (VP-D103(i)/D105(i) only) Forward Slow Playback I Press the SLOW button on the remote control during Playback. I To resume normal playback, press the (PLAY/STILL) button. Reverse Slow Playback I Press the (_) button during Forward Slow Play back. I To resume forward slow playback, press the (+) button. I To resume normal playback, press the (PLAY/STILL) button.

If you disconnect the USB cable from the PC or the camcorder while transferring, the data transmission will stop and the data may be damaged. If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other USB devices, the camcorder may not work properly. - If this occurs, remove all USB devices from the PC and reconnect the camcorder.

Page 85

Digital Still Camera mode (VP-D103(i)/D105(i) only)
MEMORY STICK (Optional Accessory)
The Memory Stick stores and manages still images recorded by the camera. Memory Stick Functions Recording still images and MPEG4 movie Viewing still images and MPEG4 movie I Single I Slide show (still images only) Multi display Protecting images against accidental erasure Deleting images recorded on a Memory Stick Print marking still images Formatting a Memory Stick Notes

Terminal Protection tab

You can use most of the cameras functions when recording to the Memory Stick. appears on the screen while recording to the Memory Stick. While recording or loading an image, do not eject or insert the Memory Stick. - Inserting or ejecting a Memory Stick while recording or loading an image can cause data damage. If you want to save all images on the Memory Stick, set the write protection tab on the Memory Stick to LOCK.
Memory Stick and are trademarks of Sony Corporation. All other product names mentioned herein may be the trademarks or registered trademarks of their respective companies. Furthermore, and are not mentioned in each case in this manual. Memory Stick PRO can not be used with the VP-D103(i) MODEL.

Page 86

Inserting and ejecting the Memory Card G Inserting the Memory Card 1. Turn the Power switch to OFF. 2. Insert the Memory Card in the direction of the arrow into the Memory Card slot located on the bottom of the camcorder. G 1. 2. 3. Ejecting the Memory Card Turn the Power switch to OFF. Push the Memory Card, then it comes out of the camcorder automatically. Pull out the Memory Card. Do not attempt to pull the Memory Card out without first pushing it in.

If you want to format the Memory Stick on your PC, use only the MS Formatter supplied with the software CD. - The MS formatter is exclusive program of the Memory Stick.

Page 99

MPEG RECORDING
You can record the moving picture images with audio on the Memory Card. Saving the pictures captured by a camera as a moving picture file onto Memory Card 1. Check whether Memory Card is inserted into the camcorder. If it is not in the camcorder, insert it onto the slot. 2. Set the mode switch to Memory Card position. 3. Set the power switch to CAMERA mode. 4. Press the START/STOP button, the images are recorded onto the Memory Card in MPEG4. I You can record 10 ~ 20 seconds continuously in once by the recording object. I You can record a camera still image onto the Memory Card by pressing the Photo button instead of the START/STOP button. 5. Press the START/STOP button to stop the recording.

I I I I I I I I I

DCIM Before using the MPEG REC function, check whether the Memory Card is inserted into the MISC camcorder. SSMOV Moving pictures can be made in two sizes, 176 x 144 or 352 x 288 (Pixel). 100SMDVC Moving images that you recorded are saved in *.asf file format on the Memory Card. The files that you recorded are saved in a following folder. The moving picture images on a Memory Card are smaller size and lower definition than one on Tape. The sound is recorded in type of mono. The following functions are not allowed in M.REC Mode. - DIS (Digital Image Stabilizer), Digital Zoom, Fade, Program AE, Digital Special Effect, Slow Shutter While you record in Memory Card, dont insert or eject the tape as it may record noise. While you record in Memory Card, dont eject it or it might break the data on the Memory Card or Memory Card itself.

Page 100

Selecting the moving picture sizes 1. Set the mode switch to Memory Card position. 2. Set the power switch to CAMERA mode. 3. Press the MENU button. 4. Turn the MENU DIAL to highlight MEMORY. 5. Press the ENTER button to enter the sub-menu. 6. Turn the MENU DIAL to highlight MPEG4 SIZE. 7. Press the ENTER button. I The MPEG4 SIZE toggles between 352X288/176X144 with each push.

MPEG Playback

The MPEG Playback function works in M. PLAY mode only. You can play the moving picture images on the Memory Card. During the MPEG4 playback, you can hear sound at the PC speaker only. (You cannot hear it from the speaker onto a camcorder and TV.) 1. 2. 3. 4. 5. 6. 7. Set the mode switch to Memory Card position. Set the power switch to PLAYER mode. Press the MENU button and turn the MENU DIAL to highlight MEMORY. Press the ENTER button to enter sub-menu. Use the MENU DIAL to select MPEG4 from the sub-menu. (M. PLAY SELECT) To exit the menu, push the MENU button. Using the (FWD) and (REV) buttons, search for the moving picture that you want to playback. 8. Press the PLAY/STILL button. I The moving pictures recorded onto the Memory Card are played back. Notes

Page 104

Using Your Camcorder Abroad
Each country or region has its own electric and colour systems. Before using your camcorder abroad, check the following items. Power sources I You can use your camcorder in any country or area with the supplied AC Power Adapter within 100V to 240V, 50/60 Hz. I Use a commercially available AC plug Adapter, if necessary, depending on the design of the local wall outlet. Colour system I You can view your recording in the viewfinder. However, to view it on a television or copy it to a videocassette recorder, the television or VCR must be PAL-compatible and have the appropriate audio/video jacks. Otherwise, you may need to use a transcoder. G PAL-compatible Countries/Regions Australia, Austria, Belgium, Bulgaria, China, CIS, Czech Republic, Denmark, Egypt, Finland, France, Germany, Greece, Great Britain, Holland, Hong Kong, Hungary, India, Iran, Iraq, Kuwait, Libya, Malaysia, Mauritius, Norway, Romania, Saudi Arabia, Singapore, Slovak Republic, Spain, Sweden, Switzerland, Syria, Thailand, Tunisia, etc. G NTSC-compatible Countries/Regions Bahamas, Canada, Central America, Japan, Korea, Mexico, Philippines, Taiwan, United States of America, etc. Note You can make recordings with your camcorder and view pictures on the LCD from anywhere in the world.

Page 105

Troubleshooting
Before contacting a Samsung authorized service centre, perform the following simple checks. They may save you the time and expense of an unnecessary call. Self Diagnosis Display

Display Blinking slow

TAPE END! TAPE END!

Informs that.

Action
the battery pack is almost discharged. Change to a charged one. When the remaining time on the tape is about 2 minutes the tape reached its end. there is no tape in camcorder. the tape is protected from recording. the camcorder has some mechanical fault. Prepare a new one. Change to a new one. Insert a tape. If you want to record, release the protection. 1. Eject the tape. 2. Set to OFF. 3. Detach the battery. 4. Reattach the battery. * If unresolved contact your local service representative. see below.

slow no slow slow slow

PROTECTION!

.D L C R

moisture condensation has formed in the camcorder.
Moisture Condensation If the camcorder is brought directly from a cold place to a warm place, moisture may condense inside the camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or the unit may not operate correctly. To prevent possible damage under these circumstances, the camcorder is fitted with a moisture sensor. If there is moisture inside the camcorder, (DEW) is displayed. If this happens, none of the functions except cassette ejection will work. Open the cassette compartment and remove the battery. Leave the camcorder for at least two hours in a dry warm room.

REPUBLIC OF IRELAND

4. This product is not considered to be defective in materials nor workmanship by reason that it requires adaptation in order to conform to national or local technical or safety standards in force in any Country other than the one for which the product was originally designed and manufactured. This warranty will not cover, and no reimbursement will be made for such adaptation nor any damage which may result. 5. This warranty covers none of the following: a) Periodic check ups, maintenance and repair or replacement of parts due to normal wear and tear. b) Cost relating to transport, removal or installation of the product. c) Misuse, including the faiure to use this product for its normal purposes or incorrect installation. d) Damage caused by Lightning, Water, Fire, Acts of God, War, Public Disturbances, incorrect mains voltage, improper ventilation or any other cause beyond the control of Samsung. 6. This warranty is valid for any person who legally acquired possession of the product during the warranty period. 7. The consumers statutory rights in any applicable national legislation whether against the retailer arising from the purchase contract or otherwise are not affected by this warranty. Unless there is national legislation to the contrary, the rights under this warranty are the consumers sole rights and Samsung, its subsidiaries and distributors shall not be liable for indirect or consequential loss or any damage to records, compact discs, videos or audio taper or any other related equipment or material.
SAMSUNG ELECTRONICS (U.K.) LTD.

ELLAS (GREECE)

Agaphtev pelavth, Sa eucaristouvme gia thn empistosuvnh pou deivxate sthn SAMSUNG me thn agorav authv th suskeuhv. To proiovn autov th SAMSUNG eivnai egguhmevno gia perivodo dwvdeka (12) mhnwvn apov thn hmeromhniva agorav tou gia antallaktikav kai ergatikav. Sthn perivptwsh pou qa creiasteiv episkeuhv, to proiovn autov th SAMSUNG qa prevpei na staleiv hv na metaferqeiv sto exousiodothmevno service, me evxoda tou agorasthv. Exousiodothmevnoi antiprovswpoi kai exousiodothmevna kevntra service se avlle Eurwpaikev cwvre, qa apodecqouvn tou ovrou th egguvhsh. Plhroforive gia ta exousiodothmevna kevntra service sthn Ellavda, mporeivte na pavrete apov thn FOURLIS TRADE A.E.B.E. L. Kruonerivou 68 Kruonevri, Apikhv Thl. 210.629.3100 I Oroi th egguvhsh 1. H egguvhsh iscuvei eavn kai movno eavn to proiovn creiavzetai service kai h kavrta egguvhsh evcei plhvrw sumplhrwqeiv kai sfragisqeiv apov to katavsthma agorav. Epivsh prevpei na proskomisqeiv kai to timolovgio hv h apovdeixh lianikhv pwvlhsh, pavnw sthn opoiva o seiriakov ariqmov tou proiovnto prevpei na eivnai eukrinhv. 2. H upocrevwsh th SAMSUNG aforav movno thn episkeuhv tou proiovnto 3. H episkeuhv tou proiovnto prevpei na anativqetai movno se exousiodothmevna kevntra service hv exousiodothmevnou antiproswvpou th SAMSUNG. Kamiva apozhmivwsh den qa givnei apodekthv gia episkeuhv pou evcei givnei apov mh exousiodothmevno apov thn SAMSUNG sunergeivo. 4. To proiovn autov den qa qewrhqeiv ellatwmatikov sta ulikav hv sthn ergasiva episkeuhv eavn qa prevpei na prosarmosteiv, metatrapeiv hv ruqmisteiv wvste na summorfwqeiv me ti topikev tecnikev prodiagrafev hv prodiagrafev pou iscuvoun se cwvra avllh apov authv gia thn opoiva proorizovtan hv kataskeuavsthke. H egguvhsh authv den kaluvptei apozhmiwvsei gia * Kefalev bivnteo kai kasetofwvnwn * Kefalev binteokavmera * Gennhvtrie aktinwvn Iaser sta CD, DVD * Thleceiristhvria * Lucnive fouvrnwn mikrokumavtwn * Prosarmogev, metatropev hv ruqmivsei, anexavrthta an eivnai epituchv hv anepituchv, ouvte opoiadhvpote zhmiva proevrcetai ex autouv.