Declaration of Conformity
We: Targa GmbH Lange Wende Soest, Germany
declare our responsibility that the product: model: Webcam SilverCrest WC2130
is confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2004/108/EC) and the Council Directive relating to Low Voltage 2006/95/EEC. The measurements were carried out in accredited laboratories. For the evaluation of above mentioned Council Directives for Electromagnetic Compatibility and for Low Voltage standards were consulted: EMC: EN 55024: 1998 + A1: 2001 + A2: 2003 EN 55022: 1998 + A1: 2000 + A2: 2003 (Class B) EN 61000-3-2: 2000 EN 61000-3-3: 1995 + A1: 2001

Safety:

EN 60950-1: 2001
Soest, 04th of Sept. 2007

authorised signature

____________________________________ Matthias Klauke, Managing Director

Hotline-Nummer: 01805-043311
(Bitte halten Sie Ihre Seriennummer bereit!) 0,12 pro Minute aus dem Netz der Deutschen Telekom

Hersteller:

TARGA GmbH, Postfach 22 44, D-59482 Soest

www.silvercrest.cc

Overview
Status LED (On = recording active) Focus ring for adjusting the image definition

Variable stand

Scope of supply
Webcam WC2130 Driver/Software CD Instruction Manual

Important notes

Before using the appliance for the first time, please carefully read through the following instructions and note all warnings, even if you are familiar with handling electronic equipment. Store this manual in a safe place for future reference. If you sell or give away the appliance, please ensure you handover this manual too.

OPERATING ENVIRONMENT

The appliance is not designed for use in rooms with a high temperature or air humidity (e.g. bathrooms) or excessive dust. Please ensure that: no direct heat sources (e.g. heaters) act on the appliance the appliance is not exposed to direct sunlight or strong artificial light you avoid contact with splashing and dripping water and aggressive liquids the appliance is not exposed to large temperature fluctuations, as otherwise air humidity can condense the appliance is not exposed to excessive impacts and vibrations Do not place any fire (e.g. candlelights) onto or next to the device.

MAINTENANCE AND CARE

Clean the appliance with a clean, dry cloth only. Never open the housing.

CHILDREN

Do not allow children to play with the webcam as there is a risk of suffocation if they swallow the small parts.
DISPOSAL OF OLD EQUIPMENT
If this symbol of a rubbish bin with a cross through it is attached to a product, the product is subject to the European Directive 2002/96/EC. All waste electrical and electronic equipment must be disposed of separately from normal domestic waste in officially provided collection points. By properly disposing of old equipment you avoid environmental damage and a risk to people's health.
CE DECLARATION OF CONFORMITY
This appliance has been tested and approved with respect to compliance with the basic requirements and other relevant regulations of the EMC Directive 89/336/EEC, the Directive for low voltage electrical equipment 73/23/EEC and the R&TTE Directive 99/5/EC.

Do not connect the webcam to your computer's USB connection until you have finished installing the software.
Please insert the driver and software CD in your CD/DVD drive. The CD starts automatically. If the installation window does not appear automatically, please right-click your CD/DVD drive in "My Computer" and select "Open". Then click "Setup.exe" to start the installation. In general, please follow the instructions on the screen. Installing the software To install the enclosed software, please select the relevant program in the installation window of the CD. Please select "Install Device Driver" first. Then click "Next". The drive installation starts. In the following window, please click "Continue installation". Then "Finish". Under "Install Application Software", please select the programs you want to install and then click "Install Application Software".
Note Please restart your computer when the installations have finished. You will be asked for to restart now or restart your computer later after clicking on Exit

Installing the webcam

Connect the PC camera's connector with your computer's USB connection. Ensure the connector is correctly inserted.
Windows has recognised new hardware and starts the Assistant for new hardware. When you are asked whether to search for drivers online, please select "No, not this time" and click "Next". Select "Automatically install software" and click "Next". In the following window, please click "Continue installation". Please click "Finish" to complete the installation.

(Example figure)

Note If you use Windows Vista as your operating system, problems associated with the use of a USB 1.1 connection can occur with the microphone. Please connect the webcam to a USB 2.0 connection.
Initial steps with VideoImpression
When you start the program, an Assistant is automatically opened, which helps you use the software. Select "Create a new video" to start a recording from the webcam. A new window opens. It contains several options for compiling your video contents. Here you can select source which you
want to use to create a video. If you want record video to a from
the webcam select "Capture From Device".
A further window open in which the live image of the webcam is displayed. If the webcam image is not displayed you may have to select "USB 2.0 PC Camera" under the device item. Quit the recording with "Finish". If you want to view a complete introduction to using VideoImpression, select "Help" in the menu and then "Basics". Note If the image is out of focus, rotate the Webcam's focus ring until the image is focussed.

Initial steps with PhotoImpression
When you start the program, an Assistant is automatically opened, which helps you use the software. Select "Video", to record and edit images from the webcam.

window

opens.
Select "Live" to display the current webcam image or select "Capture" to save an image.
An interactive Help facility is available under the
menu item "Help".
If you select "Camera/Scanner" and then "USB 2.0 PC Camera" an error message appears. This is because the webcam does not have an internal memory from which images can be read. At this point you can read out e.g. a digital camera or import an image from a scanner.
Initial steps with Funhouse
You can use Funhouse to produce unique images by combining two or more photos. Place your head on famous monuments or use your head to decorate the cover page of magazines, the bodies of famous persons, animations or any other image.
To create images, please work through the individual items, one after the other, in the lefthand menu and follow the instructions. Further help is available with the "?" symbol in the top, right-hand corner.

Seite 3

TARGA GmbH Lange Wende 41 D-59494 Soest Germany