Wireless 2.4GHz Presenter with Cursor Control

USER GUIDE

Visit our Website at www.targus.com Features and specifications subject to change without notice. 2007 Targus Group International, Inc. and Targus, Inc.
AMP06US / AMP02US / PAUM30U 410-1086-001A

CAUTION

LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS I LASER PRODUCT. NEVER POINT A LASER BEAM INTO A PERSONS EYES OR VIEW A LASER BEAM DIRECTLY, AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES. MOMENTARY EXPOSURE FROM A LASER POINTER, SUCH AS AN INADVERTENT SWEEP OF THE LIGHT ACROSS A PERSON'S EYES, MAY CAUSE TEMPORARY FLASH BLINDNESS SIMILAR TO THE EFFECT OF A CAMERA FLASH BULB. ALTHOUGH THIS CONDITION IS TEMPORARY, IT CAN BECOME MORE DANGEROUS IF THE EXPOSED PERSON IS ENGAGED IN A VISION-CRITICAL ACTIVITY SUCH AS DRIVING.
TARGUS WIRELESS 2.4GHZ PRESENTER WITH CURSOR CONTROL
Introduction Congratulations on your purchase of the new Targus wireless presenter. Now you can interact with your audiences and still maintain control of your PC or laptop. Conveniently placed page-up and page-down buttons help you go through slides efficiently, and a built-in laser pointer gives you the option of highlighting key concepts on screen. You can also use the directional stick to move the mouse cursor. List of Contents Targus Wireless 2.4GHz Presenter with Cursor Control Receiver dongle User guide Pouch 2x AAA Battery
System requirements Windows 98SE/ME/2000/XP Windows VistaTM One USB v. 1.1 or 2.0 Compliant Port
TARGUS WIRELESS 2.4GHz PRESENTER WITH CURSOR CONTROL

Function Description

Cursor Stick : Move the cursor with the stick. Pressing down on the stick is the same as left click on the mouse. B. Function Key: Click once -- F5 (play PowerPoint File) Click twice -- ESC (escape button) C. Right Button: the same as the right button of the mouse D. Left Button: the same as left button of the mouse E. Page-up F. Page-down G. Power Switch H. Laser Pointer Trigger (back of presenter) I. LED indicator: Green -- mouse activity indicator Red -- laser pointer activity indicator J. Laser pointer J. I. D. A. C. H. G. E. B.
Installing the presenter 1. Please plug the receiver into the PCs USB port. The system will automatically detect the wireless presenter. Follow the steps to search the driver of the USB device and complete the setup.
2. Please install two AAA batteries into presenter with the correct polarity. Please refer to the polarity sign inside the battery compartment.
3. Establishing connection between the presenter and the receiver. The product has been pre-set and paired between the presenter and the receiver. It is not necessary to synchronize the device. However, this paired ID may become lost due to RF interference and cause the presenter to not connect properly. There are two methods for setting the presenters ID. Method One: Step 1: Press the Right mouse Button on the presenter for 5 seconds.
Step 2: The LED indicator will flash quickly. This means the ID setting is refreshed and completed. Method two: Step 1: Press the connect button on the receiver. The LED of the presenter will start to flash.
Step 2: Press the presenters right button for 5 seconds. Please note that this step must be completed within 8 seconds after step 1. Step 3: The LED of the presenter will flash quickly. This means that the ID setting is refreshed and completed. Note: If the presenter does not work properly, please go back to step 1 to repeat the ID setting process.

Technical Support

US Australia
For technical questions, please visit:
Internet: www.targus.com/support.asp Internet: www.targus.com/au Email: infoaust@targus.com Telephone: 1800-641-645 Telephone: 0800-633-222

New Zealand

Product Registration
Targus recommends that you register your Targus accessory shortly after purchasing it. Go to: http://www.targus.com/registration.asp. You will need to provide your full name, email address, phone number, and company information (if applicable). Targus warrants this product to be free from defects in materials and workmanship for one year. If your Targus accessory is found to be defective within that time, we will promptly repair or replace it. This warranty does not cover accidental damage, wear and tear, or consequential or incidental loss. Under no conditions is Targus liable for loss of, or damage to a devices nor loss of, or damage to, programs, records, or data; nor any consequential or incidental damages, even if Targus has been informed of their possibility. This warranty does not affect your statutory rights.

Warranty

Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
FCC Statement Tested to Comply
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not authorized by the party responsible for compliance could void the users authority to operate this product.
Declaration of Conformity
Hereby, Targus, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All trademarks and registered trademarks are the properties of their respective owners. All rights reserved.

Targus Wireless Remote Presenter
Making Your Mobile Life Easier.
Visit our Web site at: www.targus.com Features and specifications are subject to change without notice. 2005 Targus Group International, Inc. and Targus, Inc. PAUM30U / 400-0110-001C

USERS GUIDE

BRUSSELS HANNOVER BARCELONA TOKYO MILAN AMSTERDAM SINGAPORE
LONDON PARIS NEW YORK LOS ANGELES TORONTO HONG KONG SYDNEY

CAUTION

LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS II LASER PRODUCT. NEVER POINT A LASER BEAM INTO A PERSONS EYES OR VIEW A LASER BEAM DIRECTLY, AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES. MOMENTARY EXPOSURE FROM A LASER POINTER, SUCH AS AN INADVERTENT SWEEP OF THE LIGHT ACROSS A PERSON'S EYES, MAY CAUSE TEMPORARY FLASH BLINDNESS SIMILAR TO THE EFFECT OF A CAMERA FLASH BULB. ALTHOUGH THIS CONDITION IS TEMPORARY, IT CAN BECOME MORE DANGEROUS IF THE EXPOSED PERSON IS ENGAGED IN A VISION-CRITICAL ACTIVITY SUCH AS DRIVING. 2
TARGUS WIRELESS REMOTE PRESENTER

Introduction

Congratulations on your purchase of the Targus Wireless Remote Presenter. The presenter is a combination remote control mouse and laser pointer. With the presenter you can control cursor movement anywhere within 33 feet (10 m) of its receiver and project a red laser pointer beam. NOTE: The actual effective distance may increase or decrease depending on the surrounding environment. The Targus Wireless Remote Presenter also features a sixteen point, directional cursor pad and primary and secondary buttons (left and right mouse click buttons) that emulate the page up and down keys when in PowerPoint mode. In addition to this users guide, this package contains the Targus Wireless Remote Presenter, its receiver and an extension cable.

System Requirements

To use the presenter, your computer must meet the following hardware requirements and run one of the operating systems listed below. Hardware PC with an Intel Pentium processor or equivalent and a hard disk drive At least 64 MB RAM USB interface Operating System Windows 98 Windows Me Windows 2000 Windows XP
Connecting the Receiver Installing the Default Driver
To connect the receiver to your computer, plug the standard USB end of the receiver into an available USB port on your computer. Alternatively, you can use the supplied USB extension cable to connect the receiver to your computer for additional length. Your computers operating system identifies the receiver as a USB Human Interface Device and begins installing the default driver. Follow any on-screen procedures to complete the default driver installation. NOTE: If you are running the Windows 98/Me operating system, you may be prompted to insert the installation CD-ROM that came with your computer. You are now ready to begin using the presenter.
Using the Targus Wireless Remote Presenter
Function Right button mouse button Left mouse button Main mouse button Laser beam Targus Wireless Remote Presenter

Laser pointer button

Changing Modes
To maximize its features, the presenter has two modes of operation, Mouse and PowerPoint. The presenters default setting is Mouse mode. To change modes, press the Function button. The various mode features are listed in the table below. Button Laser pointer Main mouse Mouse Mode Activates the laser pointer beam Controls cursor movement 5 PowerPoint Mode Same as Mouse mode Same as Mouse mode
Button Left mouse Right mouse
Mouse Mode Primary mouse button Secondary mouse button
PowerPoint Mode Emulates the Page down key Emulates the Page up key

Safety Measures

Never point the presenter at people, especially their faces, or look directly into the presenters laser beam, to avoid possible eye damage. Avoid pointing the presenters laser beam at a mirror or other highly reflective surface. Keep the presenter away from young children. Never view the presenters laser beam using telescopic devices, such as a microscope or binoculars. Any attempt to disassemble, adjust or repair the presenter may result in exposure to laser light or other safety hazards. This is a Class II Laser Product.

Specifications

Electrical/Presenter
Interface Buttons Channel Number ID Number Battery life USB Mouse (3), Laser (1), Function (1) One to 60 days, depending on amount of use 6
Input power Transmission Modulation frequency Effective distance Power consumption Standby Mode Sleep Mode Compatibility Compatibility software Laser wavelength at peak emission Laser Spot size at 16.5 feet (5 m) Weight
Two AAA batteries (3 Volt, DC) Radio Frequency 433 MHz (Europe/Australia) 900 MHz (North America) Up to 33 feet (10 m) Mouse 10 mA, Laser 18 mA 0.6 mA (two seconds) 1 uA Fully Compatible with PC/AT Windows 98/Me/2000/XP operating system 645-665 nm 0.16 to 0.32 (4 to 8 mm) 3.2 ounces (90 g)
Laser Cw output power 1mW (maximum) Dimensions (L x W x H) 4.9 x 1.7 x 0.8 (12.6 x 4.4 x 2.2 cm)

Receiver

Interface Power Button Weight Dimension (L x W x H) USB DC 5V, 500mA Max ID Setting 0.56 ounces (16 g) 3 x 1 x 0.63 (7.8 x 2.6 x 1.6 cm)

Troubleshooting

The presenter is not working or is interfering with another remote device what should I do? The presenter has 256 identification codes that allow it to operate without interference from other radio frequency devices. The presenter and its receiver must be set to the same identification code to function properly. To set the identification code: 1 Using a bent paper clip or similar object, press and release the red ID button on the top of the receiver. USB connector ID button
Receiver 2 Within ten seconds, press and hold the presenters left and right mouse buttons at the same time for two seconds, then release both keys. 3 Press any mouse key to capture the presenters new identification code.

What do I do if the response time of the presenters mouse is slow or intermittently stops working? Increase the distance between the presenters receiver and the rest of your computer equipment. Use the USB extension cable if necessary. Make sure that the presenter is within 16.5 feet of its receiver. Increase the distance between the presenters receiver and the base units of other wireless devices. Turn off any wireless devices and their base units that are near the presenters receiver. Replace the batteries.

Technical Support

For technical questions, please visit: US Internet: Australia Internet: www.targus.com/au Email: infoaust@targus.com Telephone: 1800-641-645 New Zealand Telephone: 0800-633-222 www.targus.com/support

Product Registration

Targus recommends that you register your Targus accessory shortly after purchasing it. To register your Targus accessory, go to: http://www.targus.com/registration.asp You will need to provide your full name, email address, phone number, and company information (if applicable).

Warranty

Targus warrants this product to be free from defects in materials and workmanship for one year. If your Targus accessory is found to be defective within that time, we will promptly repair or replace it. This warranty does not cover accidental damage, wear and tear, or consequential or incidental loss. Under no conditions is Targus liable for loss of, or damage to a computer; nor loss of, or damage to, programs, records, or data; nor any consequential or incidental damages, even if Targus has been informed of their possibility. This warranty does not affect your statutory rights.

Regulatory Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC Statement

Tested to Comply
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

Targus Wireless Remote Presenter If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Move the computer away from the receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Intel and Pentium are registered trademarks of Intel Corporation. Windows and PowerPoint are registered trademarks of Microsoft Corporation. All trademarks and registered trademarks are the property of their respective owners. Features and specifications subject to change without notice. 2005, Targus Group International, Inc. and Targus, Inc., Anaheim, CA 92806 USA.