Chapter 3

Machine Disassembly and Replacement
General Information.47 Before You Begin.47 Disassembly Procedure Flowchart.48 Removing the Battery.50 Removing the Hard Disc Drive Module.50 Disassembling the Hard Disc Drive Module.50 Removing the Optical Disc Drive Module.51 Disassembling the Optical Disc Drive Module.51 Removing the Memory.51 Removing the LCD Module.53 Removing the Middle Cover.53 Removing the Keyboard.53 Removing the Fan, the CPU Thermal Module and the CPU.53 Removing the Wireless LAN Card.54 Removing the LCD Module.55 Disassembling the LCD Module.56 Removing the LCD Bezel.56 Disassembling the Main Unit.58
Removing the Upper Case Assembly.58 Removing the Power Board.58 Removing the Touchpad Bracket, the Touchpad Board and the Touchpad.59 Removing the Speaker Set.60 Removing the SW DJ Board Assembly.60 Removing the Audio Board.61 Removing the VGA Thermal Module.61 Removing the Modem Board.62 Removing the Main Board.62 Removing the Control Board.63

Chapter 4

Troubleshooting
System Check Procedures.67 External Diskette Drive Check.67 External CD-ROM Drive Check.67 Keyboard or Auxiliary Input Device Check.67 Memory check.68 Power System Check.68 Touchpad Check.70 Power-On Self-Test (POST) Error Message.71 Index of Error Messages.72 Phoenix BIOS Beep Codes.75 Index of Symptom-to-FRU Error Message.79 Intermittent Problems.82 Undetermined Problems.83

Chapter 5

Jumper and Connector Locations
Top View.84 Bottom View.86

Cahpter 6

FRU (Field Replaceable Unit) List
Aspire 3000/5000 Exploded Diagram.89 Aspire 3000/3500/5000 Series.101
Appendix A Model Definition and Configuration Appendix B Test Compatible Components Appendix C Online Support Information
Microsoft Windows XP Environment Test.105

Chapter 1

System Introduction

Features

This computer was designed with the user in mind. Here are just a few of its many features:

Microprocessor

Mobile AMD Turion 64 processor ML-28/ML-30 or higher for Aspire 5000 Mobile AMD Sempron processor 2600+ to 3000+ or higher for Aspire 3000 Intel Celeron M 350/360/370 processor at 1.3/1.4/1.5 GHz, 400 MHz FSB for Aspire 3500 series Intel Pentium M 715 processor at 1.5 GHz, 400 MHz FSB for Aspire 3500 series

Memory

256 MB or 512 MB of DDR 333 SDRAM standard, upgradeable to 1 GB with dual so DIMM modules 512 KB flash ROM BIOS for models employing Intel Celeron M processor (Aspire 3500 series); 2 MB flash ROM BIOS for models employing Intel Pentium processor (Aspire 3500 series)

Data storage

40/60/80 GB ATA/100 hard disk DVD-Dual or Combo drive

Display and graphics

Color Thin-Film Transistor (TFT) LCD displaying at -- 15 XGA (1024 X 768) -- 15.4 WXGA (1280 X 800) -- 15.4 WXGA Acer CrystalBrite (1280 X 800) SiSM661MX integrated 3D graphics with up to 64 MB of VRAM, supporting Microsoft DirectX 7.0 Dual independent display support MPEG-2/DVD hardware-assisted capability

Communication

Modem: 56K ITU V.92 modem with PTT approval; Wake-on-Ring ready LAN: 10/100 Mbps Fast Ethernet; Wake-on-LAN ready Wireless LAN (optional): integrated miniPCI 802.11b/g Wi-Fi CERTIFIEDTM solution Wireless PAN (optional): integrated Bluetooth
Audio system with two built-in speakers Sound Blaster ProTM and MS-Sound compatible Built-in microphone

Input devices

88-/89-key Acer FineTouchTM keyboard Touchpad with 4-way integrated scroll button Four easy-launch buttons Two front-panel buttons: wireless LED-button and Bluetooth LED-button

I/O interface

Three USB 2.0 ports Ethernet (RJ-45) port Modem (RJ-11) port External display (VGA) port Microphone/line-in jack Headphones/speaker/line-out port Type II PC Card slot DC-in jack for AC adaptor
Pleaes aware of these two items only for Aspire 3000/5000 case usage : Note 1: Integrated 3D AGP graphics with up to 128 MB of shared memory based on system configuration with 512MB system memory Note 2: Integrated 3D AGP graphics with up to 64 MB of shared memory based on system configuration with 256MB system memory

Aspire 3000/3500//5000

System Block Diagram (For Aspire 3000/5000)

HOST 200MHz ZCLK 133MHz

DDR SO-DIMM

Page 5

CLK-GEN

ICS 952801

AGP 66MHz PCI 33MHz USB 48MHz REF 14.318MHz

DDR 333

AMD Athlon64

SMT uPGA754

Page 3,4

Thermal

Thermal sensor & Fan

Block Diagram

Page 2
HyperTransport 16x16 1600MT/s

3V_ALWAYS 5VPCU 3V_S5

RGB INTA# DVO

1x D-SUB 15-Pin

Page 10

CRT LCD

SIS M760GX

(698 PIN BGA)

Page 6,7,8

LVDS Transmitter

SIS302ELV

Page 9

15" XGA/WXGA
1.8V_S5 3VSUS 5VSUS +3V +5V 15V

Page 22

MuTIOL(1GB/s)
REQ0#, GNT0# INTB#, INTC# IDSEL : AD22 PCI 2.2 133MB/s (33MHZ) REQ1#, GNT1# IDSEL : AD17 INTD# WLAN 802.11A/G Page 15

Primary Master

Fn-q Fn-r Fn-s

Screen blank

Touchpad Toggle

Speaker on/off
Turns the speakers on and off; mutes the sound.

Volume up

Increases the sound volume.

Volume down

Decreases the sound volume.

Brightness up

Increases the screen brightness.

Brightness down

Decreases the screen brightness.

Special keys

You can locate the Euro symbol at the upper-center (for European keyboard) and/or bottom-right (Chinese keyboard) of your keyboard. To type:

The Euro symbol

1. 2. Open a text editor or word processor. Either directly press the <Euro> key at the bottom-right of the keyboard (for Chinese keyboard), or hold <Alt Gr> and then press the <5> key at the upper-center of the keyboard.symbol at the upper-center of the keyboard (for European keyboard, you can use both method). NOTE: Some fonts and software do not support the Euro symbol. Please refer to www.microsoft.com/ typography/faq/faq12.htm for more information.

The US dollar sign

1. 2. Open a text editor or word processor. Either directly press the <Euro> key at the bottom-right of the keyboard (for Chinese keyboard), or hold <Shift> and then press the <4> key at the upper-center of the keyboard.symbol at the upper-center of the keyboard (for European keyboard, you can use both method). NOTE: This function varies according to the language settings.

Touchpad

The built-in touchpad is a pointing device that senses movement on its surface. This means the cursor responds as you move your finger on the surface of the touchpad. The central location on the palmrest provides optimum comfort and suuport.

Touchpad basics

The following items teach you how to use the touchpad:
* Move your finger across the touchpad (2) to move the cursor. * Press the left (1) and right (4) buttons located on the edge of the touchpad to do selection and execution functions. These two buttons are similar to the left and right buttons on a mouse. Tapping on the touchapd is the same as clicking the left button. * Use the 4-wa scroll (3) button to scroll up or down and move left or right a page. This button mimics your cursor pressing on the right scroll bar of Windows applications.

Item Cache size 1024KB/512KB (exclusive) total effective cache: 1152KB/640KB for Mobile AMD Turion 64 processor (Aspire 5000) 256KB/128KB (exclusive) total effective cache: 384KB/256KB for Mobile AMD Sempron processor (Aspire 3000) 512KB for Intel Celeron M processor (Aspire 3500) 2MB for Intel Pentium M processor (Aspire 3500) 1st level cache control 2nd level cache control Cache scheme control Always Enabled Always Enabled Fixed-in write back Specification

System Memory

Item Memory controller built-in CPU Mobile AMD Turion 64 processor ML-28/ML-30 or higher for Aspire 5000 Mobile AMD Sempron processor 2600+ to 3000+ or higher for Aspire 3000 Intel Celeron M 350/360/370 processor at 1.3/1.4/1.5 GHz, 400 MHz FSB for Aspire 3500 series Intel Pentium M 715 processor at 1.5 GHz, 400 MHz FSB for Aspire 3500 series Onboard memory size DIMM socket number Supports memory size per socket Supports maximum memory size Supports DIMM type Supports DIMM Speed Supports DIMM voltage Supports DIMM package Memory module combinations 0MB 2 Sockets 256MB 1024MB DDR-DRAM 333 MHz 2.5 V/1.25V 200-pin so-DIMM You can install memory modules in any combinations as long as they match the above specifications. Specification

Memory Combinations

Slot 1 0MB 0MB 0MB 256MB 256MB 256MB 256MB 512MB 512MB 512MB 512MB 1024MB 256MB 512MB 1024MB 0MB 256MB 512MB 1024MB 0MB 256MB 512MB 1024MB 0MB Slot 2 256MB 512MB 1024MB 256MB 512MB 768MB 1280MB 512MB 768MB 1024MB 1536MB 1024MB Total Memory
Slot 1 1024MB 1024MB 1024MB 256MB 512MB 1024MB Slot 2 1280MB 1536MB 2048MB Total Memory
Above table lists some system memory configurations. You may combine DIMMs with various capacities to form other combinations. LAN Interface
Item Chipset Supports LAN protocol LAN connector type LAN connector location 10/100 RJ45 Right side Specification

Modem Interface

Item Chipset Fax modem data baud rate (bps) Data modem data baud rate (bps) Supports modem protocol Modem connector type Modem connector location 14.4K 56K V.92MDC RJ11 Right side Specification CS1037 Internal Agere Scorpio chipset (Scorpio+CSP1037B)

This chapter contains step-by-step procedures on how to disassemble the notebook computer for maintenance and troubleshooting. To disassemble the computer, you need the following tools: Wrist grounding strap and conductive mat for preventing electrostatic discharge Flat-bladed screw driver Phillips screw driver Tweezers Plastic Flat-bladed screw driver Hexed Screw Driver NOTE: The screws for the different components vary in size. During the disassembly process, group the screws with the corresponding components to avoid mismatch when putting back the components.

General Information

Before You Begin
Before proceeding with the disassembly procedure, make sure that you do the following: 1. 2. Turn off the power to the system and all peripherals. Unplug the AC adapter and all power and signal cables from the system
NOTE: Aspire 9100 series product uses mylar or tape to fasten the FFC/FPC/connectors/cable, you may need to tear the tape or mylar before you disconnect different FFC/FPC/connectors.
Disassembly Procedure Flowchart
The flowchart on the succeeding page gives you a graphic representation on the entire disassembly sequence and instructs you on the components that need to be removed during servicing. For example, if you want to remove the main board, you must first remove the keyboard, then disassemble the inside assembly frame in that order.
*2 HDD Module *2 Dimm Cover
*1 Modem Cover Hinge Caps
*2 HDD HDD Holder Memory Modem Board

*2 Middle Cover

*6 Keyboard LCD Module

*2 Launch Board

*3 *3 *11 *4

RTC Battery

*3 Mini PCI Card Plate
*4 Lower Case Assembly Upper Case Assembly Disconnect W ireless LAN Antenna Thermal Module

*2 FDD Module

*4 W ireless LAN Antenna Touchpad Cover W ireless LAN Card CPU
*4 ODD Module HDD Bracket

*1 ODD Support Bracket

*1 CPU Heatsink Plate
*3 VGA Heatsink Plate Touchpad Button Pad
*2 *4 ODD Bracket ODD Main Board Touchpad Touchpad Scroll Key

*2 DC Board

*4 PCMCIA Slot Touchpad Cable Upper Case

*2 Speaker Set

10. Then detach the upper case assembly.

Removing the Power Board

1. 2. 3. 4. 5. 6. 7. See Removing the Battery on page 50. See Removing the Hard Disc Drive Module on page 50. See Removing the Optical Disc Drive Module on page 51. See Removing the Memory on page 51. See Removing the LCD Module on page 53. Remove the two screws securing the power board. Tear off the tape holding the power board cable then remove the power board.
Removing the Touchpad Bracket, the Touchpad Board and the Touchpad
1. 2. 3. 4. 5. 6. 7. See Removing the Battery on page 50. See Removing the Middle Cover on page 53. See Removing the Keyboard on page 53. See Removing the Power Board on page 58. See Removing the Upper Case Assembly on page 58. Pull back the tape covering the touchpad FFC. Disconnect the touchpad FFC the remove it.
Remove the four screws securing the touchpad bracket. Slide the touchpad bracket back as shown.
10. Then remove the touchpad bracket.
11. Use a flat headed screw driver to detach the touchpad board. 12. Then detach the touchpad carefully.

Removing the Speaker Set

1. 2. 3. 4. 5. 6. 7. 8. See Removing the Battery on page 50. See Removing the Middle Cover on page 53. See Removing the Keyboard on page 53. See Removing the Power Board on page 58. See Removing the Upper Case Assembly on page 58. Disconnect the SW DJ board cable. Disconnect the CIR receiver cable. Then disconnect the audio board FFC cable.
Disconnect the speaker set cable.
10. Then detach the speaker set from the lower case.
Removing the SW DJ Board Assembly
1. 2. 3. 4. 5. 6. See Removing the Battery on page 50. See Removing the Middle Cover on page 53. See Removing the Keyboard on page 53. See Removing the Power Board on page 58. See Removing the Upper Case Assembly on page 58. See Removing the Speaker Set on page 60.
Remove the two screws securing the SW DJ board assembly. Remove the SW DJ board assembly from the lower case.
Remove the two screws securing the SW DJ board and SW DJ board bracket.
10. Then remove the SW DJ board.

Removing the Audio Board

1. 2. 3. 4. 5. 6. 7. 8. 9. See Removing the Battery on page 50. See Removing the Middle Cover on page 53. See Removing the Keyboard on page 53. See Removing the Power Board on page 58. See Removing the Upper Case Assembly on page 58. See Removing the Speaker Set on page 60. See Removing the SW DJ Board Assembly on page 60. Remove the screw securing the audio board. Detach the audio board FFC.

The following auxiliary input devices are supported by this computer: Numeric keypad External keyboard 67 Chapter 4
If any of these devices do not work, reconnect the cable connector and repeat the failing operation.

Memory check

Memory errors might stop system operations, show error messages on the screen, or hang the system. 1. 2. 3. Boot from the diagnostics diskette and start the doagmpstotics program (please refer to main board. Go to the diagnostic memory in the test items. Press F2 in the test items.
4. Follow the instructions in the message window. NOTE: Make sure that the DIMM is fully installed into the connector. A loose connection can cause an error.

Power System Check

To verify the symptom of the problem, power on the computer using each of the following power sources: 1. 2. 3. Remove the battery pack. Connect the power adapter and check that power is supplied. Disconnect the power adapter and install the charged battery pack; then check that power is supplied by the battery pack. Check the Power Adapter on page 69 Check the Battery Pack on page 70
If you suspect a power problem, see the appropriate power supply check in the following list:

Check the Power Adapter

Unplug the power adapter cable from the computer and measure the output voltage at the plug of the power adapter cable. See the following figure
Pin 1: +19 to +20.5V Pin 2: 0V, Ground
If the voltage is not correct, replace the power adapter. If the voltage is within the range, do the following: Replace the System board. If the problem is not corrected, see Undetermined Problems on page 83.
If the voltage is not correct, go to the next step. NOTE: An audible noise from the power adapter does not always indicate a defect. 3. 4. If the power-on indicator does not light up, check the power cord of the power adapter for correct continuity and installation. If the operational charge does not work, see Check the Battery Pack on page 70.

Check the Battery Pack

To check the battery pack, do the following: From Software: 1. 2. 3. 4. 1. 2. Check out the Power Management in control Panel In Power Meter, confirm that if the parameters shown in the screen for Current Power Source and Total Battery Power Remaining are correct. Repeat the steps 1 and 2, for both battery and adapter. This helps you identify first the problem is on recharging or discharging. Power off the computer. Remove the battery pack and measure the voltage between battery terminals 1(+) and 6(ground). See the following figure

From Hardware:

If the voltage is still less than 7.5 Vdc after recharging, replace the battery.
To check the battery charge operation, use a discharged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer. If the battery status indicator does not light up, remove the battery pack and let it return to room temperature. Re-install the battery pack. If the charge indicator still does not light up, replace the battery pack. If the charge indicator still does not light up, replace the DC/DC charger board.

Touchpad Check

If the touchpad doesnt work, do the following actions one at a time to correct the problem. Do not replace a non-defective FRU: 1. 2. 3. Reconnect the touchpad cables. Replace the touchpad. Replace the system board.
After you use the touchpad, the pointer drifts on the screen for a short time. This self-acting pointer movement can occur when a slight, steady pressure is applied to the touchpad pointer. This symptom is not a hardware problem. No service actions are necessary if the pointer movement stops in a short period of time.
Power-On Self-Test (POST) Error Message
The POST error message index lists the error message and their possible causes. The most likely cause is listed first. NOTE: Perform the FRU replacement or actions in the sequence shown in FRU/Action column, if the FRU replacement does not solve the problem, put the original part back in the computer. Do not replace a non-defective FRU. This index can also help you determine the next possible FRU to be replaced when servicing a computer. If the symptom is not listed, see Undetermined Problems on page 83. The following lists the error messages that the BIOS displays on the screen and the error symptoms classified by function. NOTE: Most of the error messages occur during POST. Some of them display information about a hardware device, e.g., the amount of memory installed. Others may indicate a problem with a device, such as the way it has been configured. NOTE: If the system fails after you make changes in the BIOS Setup Utility menus, reset the computer, enter Setup and install Setup defaults or correct the error.

Index of Error Messages

Error Code List
Error Codes Error Messages
Equipment Configuration Error Causes: 1. CPU BIOS Update Code Mismatch 2. IDE Primary Channel Master Drive Error (THe causes will be shown before Equipment Configuration Error) Memory Error at xxxx:xxxx:xxxxh (R:xxxxh, W:xxxxh) Real Time Clock Error CMOS Battery Bad CMOS Checksum Error System disabled. Incorrect password is specified. Battery critical LOW In this situation BIOS will issue 4 short beeps then shut down system, no message will show. Thermal critical High In this situation BIOS will shut down system, not show message.
110 <No error code>

<No error code>

Error Message List

Error Messages FRU/Action in Sequence

Failure Fixed Disk

Reconnect hard disk drive connector. Load Default Settings in BIOS Setup Utility. Hard disk drive System board see Keyboard or Auxiliary Input Device Check on page 67. see Keyboard or Auxiliary Input Device Check on page 67. see Keyboard or Auxiliary Input Device Check on page 67. Unlock external keyboard BIOS ROM System board DIMM System board DIMM System board Replace RTC battery and Run BIOS Setup Utility to reconfigure system time, then reboot system. RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. System board
Stuck Key Keyboard error Keyboard Controller Failed Keyboard locked - Unlock key switch Shadow RAM Failed at offset: nnnn System RAM Failed at offset: nnnn Extended RAM Failed at offset: nnnn System battery is dead - Replace and run Setup System CMOS checksum bad - Default configuration used System timer error
Monitor type does not match CMOS - Run Setup Run Load Default Settings in BIOS Setup Utility.

Real time clock error

RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. System board Run Load Default Settings in BIOS Setup Utility. RTC battery System board Run Load Default Settings in BIOS Setup Utility. DIMM System board Check the drive is defined with the proper diskette type in BIOS Setup Utility See External Diskette Drive Check on page 67. Check the drive is defined with the proper diskette type in BIOS Setup Utility System board System board DIMM System board DIMM System board DIMM System board Run Load Default Settings in BIOS Setup Utility. RTC battery System board Run Load Default Settings in BIOS Setup Utility. RTC battery System board DIMM BIOS ROM System board None BIOS ROM System board Run Load Default Settings in BIOS Setup Utility. RTC battery System board Enter Setup and see if fixed disk and drive A: are properly identified. Diskette drive Hard disk drive System board
Previous boot incomplete - Default configuration used Memory size found by POST differed from CMOS Diskette drive A error
Incorrect Drive A type - run SETUP System cache error - Cache disabled CPU ID: DMA Test Failed Software NMI Failed Fail-Safe Timer NMI Failed Device Address Conflict
Allocation Error for device

Failing Bits: nnnn

Fixed Disk n Invalid System Configuration Data I/O device IRQ conflict
Operating system not found
No beep Error Messages FRU/Action in Sequence
No beep, power-on indicator turns off and LCD is blank.
Power source (battery pack and power adapter). See Power System Check on page 68. Ensure every connector is connected tightly and correctly. Reconnect the DIMM. LED board. System board. Power source (battery pack and power adapter). See Power System Check on page 68. Reconnect the LCD connector Hard disk drive LCD inverter ID LCD cable LCD Inverter LCD System board Reconnect the LCD connectors. LCD inverter ID LCD cable LCD inverter LCD System board Ensure every connector is connected tightly and correctly. System board Speaker System board

No beep, power-on indicator turns on and LCD is blank.
No beep, power-on indicator turns on and LCD is blank. But you can see POST on an external CRT.
No beep, power-on indicator turns on and a blinking cursor shown on LCD during POST. No beep during POST but system runs correctly.

Phoenix BIOS Beep Codes

Code Beeps POST Routine Description
02h 03h 04h 06h 08h 09h 0Ah 0Bh 0Ch 0Eh 0Fh 10h 11h 12h 13h 14h 16h 17h 18h 1Ah 1Ch 20h 22h 24h 26h 28h 29h 2Ah 2Ch 2Eh 2Fh 30h 32h 33h 36h 38h 3Ah 3Ch 3Dh 42h 45h 1-4-1-1 1-3-4-1 1-3-4-3 1-3-1-1 1-3-1-3 1-2-2-3
Verify Real Mode Disable Non-Maskable Interrupt (NMI) Get CPU type Initialize system hardware Initialize chipset with initial POST values Set IN POST flag Initialize CPU registers Enable CPU cache Initialize caches to initial POST values Initialize I/O component Initialize the local bus IDE Initialize Power Management Load alternate registers with initial POST values Restore CPU control word during warm boot Initialize PCI Bus Mastering devices Initialize keyboard controller BIOS ROM checksum Initialize cache before memory autosize 8254 timer initialization 8237 DMA controller initialization Reset Programmable Interrupt Controller Test DRAM refresh Test 8742 Keyboard Controller Set ES segment register to 4 GB Enable A20 line Autosize DRAM Initialize POST Memory Manager Clear 215 KB base RAM RAM failure on address line xxxx RAM failure on data bits xxxx of low byte of memory bus Enable cache before system BIOS shadow RAM failure on data bits xxxx of high byte of memory bus Test CPU bus-clock frequency Initialize Phoenix Dispatch Manager Warm start shut down Shadow system BIOS ROM Autosize cache Advanced configuration of chipset registers Load alternate registers with CMOS values Initialize interrupt vectors POST device initialization

POST Routine Description

46h 48h 49h 4Ah 4Bh 4Ch 4Eh 50h 51h 52h 54h 58h 59h 5Ah 5Bh 5Ch 60h 62h 64h 66h 67h 68h 69h 6Ah 6Bh 6Ch 6Eh 70h 72h 76h 7Ch 7Eh 80h 81h 82h 83h 84h 85h 86h 87h 88h 89h 8Ah 8Bh

2-1-2-3

Check ROM copyright notice Check video configuration against CMOS Initialize PCI bus and devices Initialize all video adapters in system QuietBoot start (optional) Shadow video BIOS ROM Display BIOS copyright notice Display CPU type and speed Initialize EISA board Test keyboard Set key click if enabled

2-2-3-1

Test for unexpected interrupts Initialize POST display service Display prompt Press F2 to enter SETUP Disable CPU cache Test RAM between 512 and 640 KB Test extended memory Test extended memory address lines Jump to User Patch1 Configure advanced cache registers Initialize Multi Processor APIC Enable external and CPU caches Setup System Management Mode (SMM) area Display external L2 cache size Load custom defaults (optional) Display shadow-area message Display possible high address for UMB recovery Display error messages Check for configuration errors Check for keyboard errors Set up hardware interrupt vectors Initialize coprocessor if present Disable onboard Super I/O ports and IRQs Late POST device initialization Detect and install external RS232 ports Configure non-MCD IDE controllers Detect and install external parallel ports Initialize PC-compatible PnP ISA devices Re-initialize onboard I/O ports Configure Motherboard Configurable Devices (optional) Initialize BIOS Area Enable Non-Maskable Interrupts (NMIs) Initialize Extended BIOS Data Area Test and initialize PS/2 mouse

The system doesn't enter hibernation mode and four short beeps every minute.
The system doesnt enter standby mode after closing the LCD The system doesn't resume from hibernation mode.
See Hibernation Mode on page 34. LCD cover switch System board See Hibernation Mode on page 34. Hard disk connection board Hard disk drive System board See Hibernation Mode on page 34. LCD cover switch System board
The system doesn't resume from standby mode after opening the LCD.
Battery fuel gauge in Windows doesnt go higher than 90%.
Remove battery pack and let it cool for 2 hours. Refresh battery (continue use battery until power off, then charge battery). Battery pack System board Reconnect hard disk/CD-ROM drives. Hard disk connection board System board
System hangs intermittently.
Peripheral-Related Symptoms
System configuration does not match the installed devices. External display does not work correctly. USB does not work correctly Print problems.
Enter BIOS Setup Utility to execute Load Default Settings, then reboot system. Reconnect hard disk/CD-ROM/diskette drives. Press Fn+F5, LCD/CRT/Both display switching System board System board Ensure the Parallel Port in the Onboard Devices Configuration of BIOS Setup Utility is set to Enabled. Onboard Devices Configuration Run printer self-test. Printer driver Printer cable Printer System Board Ensure the Serial Port in the Devices Configuration of BIOS Setup Utility is set to Enabled. Device driver Device cable Device System board
Serial or parallel port device problems.
Keyboard/Touchpad-Related Symptoms
Keyboard (one or more keys) does not work.
Reconnect the keyboard cable. Keyboard System board Reconnect touchpad cable. Touchpad board System board

Touchpad does not work.

Modem-Related Symptoms
Internal modem does not work correctly.
Modem phone port modem combo board System board
NOTE: If you cannot find a symptom or an error in this list and the problem remains, see Undetermined Problems on page 83.

Intermittent Problems

Intermittent system hang problems can be caused by a variety of reasons that have nothing to do with a hardware defect, such as: cosmic radiation, electrostatic discharge, or software errors. FRU replacement should be considered only when a recurring problem exists. When analyzing an intermittent problem, do the following: 1. 2. 3. Run the advanced diagnostic test for the system board in loop mode at least 10 times. If no error is detected, do not replace any FRU. If any error is detected, replace the FRU. Rerun the test to verify that there are no more errors.

Undetermined Problems

The diagnostic problems does not identify which adapter or device failed, which installed devices are incorrect, whether a short circuit is suspected, or whether the system is inoperative. Follow these procedures to isolate the failing FRU (do not isolate non-defective FRU). NOTE: Verify that all attached devices are supported by the computer. NOTE: Verify that the power supply being used at the time of the failure is operating correctly. (See Power System Check on page 68): 1. 2. 3. Power-off the computer. Visually check them for damage. If any problems are found, replace the FRU. Remove or disconnect all of the following devices: Non-Acer devices Printer, mouse, and other external devices Battery pack Hard disk drive DIMM CD-ROM/Diskette drive Module PC Cards 4. 5. 6. 7. Power-on the computer. Determine if the problem has changed. If the problem does not recur, reconnect the removed devices one at a time until you find the failing FRU. If the problem remains, replace the following FRU one at a time. Do not replace a non-defective FRU: System board LCD assembly

I/O - Legacy (PS2/Serial) Keyboard/ Mouse
I/O - USB (Printer/Scanner)
I/O - USB (Speaker/Joystick))

I/O - USB Camera

I/O - USB Storage Drive I/O-USB Flash Drive

I/O - USB Hub

I/O - Access Point (802.11b)
I/O Acess Point (802.11a/b) I/O Acess Point (802.11a) PCMCIA PCMCIA - ATA
Intel Dual Pro/Wireless 5000 Intel Pro/Wireless 5000 IBM Microdrive 340MB IBM Microdrive 1G Iomega Click! 40MB Sony Memory Stick 64MB Sandisk Flash Card 20MB Apacer SD Flash Card 128MB Apacer SD Flash Card 256MB Transcend SD Card 32MB Transcend SD Card 256MB Hagiwara sys-com SD Card 256MBT Apricorn EZ-USB2.0 Cardbus PC Card DTK USB 2.0 2Port CardBus Host Controller Adaptec USB2CONNECT Buffalo 1394 Interface Cardbus IFC-ILCB/DV I-O Data 1394 Interface Cardbus CB1394/DVC Pixela 1394 Cardbus PC Card PIX-PCMC/FW1 Adaptec 1408 or B SCSI CB NewMedia Bus Toaster SCSI II IBM Community Bluetooth PC Card Toshiba Bluetooth PC Card

PCMCIA - USB 2.0

PCMCIA - 1394
PCMCIA-SCSI PCMCIA - Bluetooth

Appendix C

Online Support Information
This section describes online technical support services available to help you repair your Acer Systems. If you are a distributor, dealer, ASP or TPM, please refer your technical queries to your local Acer branch office. Acer Branch Offices and Regional Business Units may access our website. However some information sources will require a user i.d. and password. These can be obtained directly from Acer CSD Taiwan. Acer's Website offers you convenient and valuable support resources whenever you need them. In the Technical Information section you can download information on all of Acer's Notebook, Desktop and Server models including: Service guides for all models User's manuals Training materials Bios updates Software utilities Spare parts lists TABs (Technical Announcement Bulletin) For these purposes, we have included an Acrobat File to facilitate the problem-free downloading of our technical material. Also contained on this website are: Detailed information on Acer's International Traveler's Warranty (ITW) Returned material authorization procedures An overview of all the support services we offer, accompanied by a list of telephone, fax and email contacts for all your technical queries. We are always looking for ways to optimize and improve our services, so if you have any suggestions or comments, please do not hesitate to communicate these to us.
AC Adapter 28 AFLASH Utility 43 Audio 20 Battery Pack 49 Procedure Flowchart 48 Display 2 display hotkeys 16 Display Standby Mode 29 DVD-ROM Interface 23, 24 Battery 27 BIOS 20 package 20 ROM size 20 ROM type 20 vendor 20 Version 20 BIOS Supports protocol 20 BIOS Utility 32 Navigating 33 Onboard Device Configuration 38 Startup Configuration 37 System Security 42 Board Layout Bottom View 6, 86 Top View 5, 84 brightness hotkeys 16

Aspire 3000/5000 Series User's Guide
Copyright 2005. Acer Incorporated. All Rights Reserved. Aspire 3000/5000 Series User's Guide Original Issue: March 2005
Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose. Record the model number, serial number, purchase date, and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your computer. All correspondence concerning your unit should include the serial number, model number, and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording, or otherwise, without the prior written permission of Acer Incorporated.
Aspire 3000/5000 Series Notebook Computer
Model Number: __________________________________ Serial Number: ___________________________________ Purchase Date: ___________________________________ Place of Purchase: ________________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.

First things first

We would like to thank you for making the Aspire series of notebook computers your choice for your mobile computing needs.

Your guides

To help you use your Aspire, we have designed a set of guides: First off, the Just for starters. poster helps you get started with setting up your computer.
The printed User's Guide introduces you to the basic features and functions of your new computer. For more on how your computer can help you to be more productive, please refer to the AcerSystem User's Guide. This guide contains detailed information on such subjects as system utilities, data recovery, expansion options, and troubleshooting. In addition it contains warranty information and the general regulations and safety notices for your notebook. It is available in Portable Document Format (PDF) and comes preloaded on your notebook. Follow these steps to access it:
1 Click on Start, All Programs, AcerSystem. 2 Click on AcerSystem User's Guide.
Note: Viewing the file requires Adobe Acrobat Reader. If Adobe Acrobat Reader is not installed on your computer, clicking on AcerSystem User's Guide will run the Acrobat Reader setup program first. Follow the instructions on the screen to complete the installation. For instructions on how to use Adobe Acrobat Reader, access the Help and Support menu.
Basic care and tips for using your computer
Turning your computer on and off
To turn on the computer, simply press and release the power button below the LCD screen beside the launch keys. See "Front view" on page 1 for the location of the power button. To turn the power off, do any of the following:
Use the Windows shutdown command Click on Start, Turn Off Computer; then click on Turn Off. Use the power button
Note: You can also use the power button to perform power management functions. See "Moving around" on page 43 of the AcerSystem User's Guide.
Use the customized functions for power management You can also shut down the computer by closing the display cover, or by pressing the sleep hot key <Fn> + <F4>. See "Moving around" on page 43 of the AcerSystem User's Guide.

Windows keys

The keyboard has two keys that perform Windows-specific functions. Key Windows key Description Pressed alone, this key has the same effect as clicking on the Windows Start button; it launches the Start menu. It can also be used with other keys to provide a variety of functions: < < < < < < (< > + <Tab> Activates the next Taskbar button. > + <E> > + <F1> > + <F> > + <R> > + <M> Opens the My Computer window. Opens Help and Support. Opens the Find: All Files dialog box. Opens the Run dialog box. Minimizes all windows. > + <M> Undoes the minimize all windows

<Shift> + <

> + <M>) action
Application This key has the same effect as clicking the right mouse key button; it opens the application's context menu.

Hot keys

The computer employs hot keys or key combinations to access most of the computer's controls like screen brightness, volume output and the BIOS utility.
15 To activate hot keys, press and hold the <Fn> key before pressing the other key in the hot key combination.
Hot key Icon <Fn> + <F1> <Fn> + <F2> <Fn> + <F3> <Fn> + <F4> <Fn> + <F5> <Fn> + <F6> <Fn> + <F7> <Fn> + <F8> <Fn> + <> <Fn> + <> <Fn> + <>

Function Hot key help

Description Displays help on hot keys.
Acer eSetting Launches Acer eSetting in Acer eManager. See "Acer eManager" on page 19. Acer Power Launches Power Management options. Management Sleep Display toggle Screen blank Touchpad toggle Speaker toggle Volume up Puts the computer in Sleep mode. Switches display output between the display screen, external monitor (if connected) and both. Turns the display screen backlight off to save power. Press any key to return. Turns the internal touchpad on and off. Turns the speakers on and off. Increases the sound volume.
Volume down Decreases the sound volume. Brightness up Increases the screen brightness.
16 Hot key Icon <Fn> + <> Function Brightness down Description Decreases the screen brightness.

Special keys

You can locate the Euro symbol at the upper-center and/or bottom-right of your keyboard. To type:

The Euro symbol

Open a text editor or word processor. Either directly press the <Euro> key at the bottom-right of the keyboard, or hold <Alt Gr> and then press the <5> key at the upper-center of the keyboard.

Note: Some fonts and software do not support the Euro symbol. Please refer to www.microsoft.com/typography/faq/faq12.htm for more information.

The US dollar sign

Open a text editor or word processor. Either directly press the <Dollar> key at the bottom-right of the keyboard, or hold <Shift> and then press the <4> key at the upper-center of the keyboard.
Note: This function varies according to the language settings.
Ejecting the optical (CD or DVD) drive tray
To eject the optical drive tray when the computer is turned on, press the drive eject button.
When the power is off, you can eject the drive tray by using the emergency eject hole.
Using a computer security lock
A security keylock notch, located on the left hand side of the computer, lets you connect a Kensington-compatible computer security lock.
Wrap the computer security lock cable around an immovable object such as a table or handle of a locked drawer. Insert the lock into the notch and turn the key to secure the lock. Some keyless models are also available.
The computer comes with 16-bit high-fidelity AC'97 stereo audio, and dual stereo speakers.

Adjusting the volume

Adjusting the volume on the computer is as easy as pressing some buttons. See "Hot keys" on page 14 for more information on adjusting the speaker volume.
Using the system utilities

Acer eManager

The innovative Acer eManager software is designed for easy access to frequently used functions. Press " ," to launch the Acer eManager user interface, featuring three main settings: Acer eSettings, Acer ePresentation and Acer eRecovery.

To set the "

" key, see "Launch keys" on page 10.
Acer ePresentation simplifies resolution settings when connecting to a projector. Acer eRecovery creates backups and recovers system configurations reliably. Acer eSettings makes managing system settings and security easy.
For more information, open Acer eManager, click on the appropriate application and select the Help function.
Acer GridVista (dual-display compatible)
Note: This feature is only available on certain models. To enable the dual monitor feature of your notebook, first ensure the second monitor is connected, then, select Start, Control Panel, Display and click on Settings. Select the secondary monitor (2) icon in the display box and then click the check box Extend my windows desktop onto this monitor. Finally, Apply the new settings and click OK to complete the process.

Language

The "Language settings" control the audio and subtitle output of DVDs/VCDs. "Subtitle" selects the default subtitle language for DVDs when available. The factory setting is "Off." "Closed caption" turns on the closed captions on DVDs. This function displays captions encoded in the video signal that describe on screen action and dialog for the hearing impaired. The factory setting is "Off." "Audio" selects the default language for DVD titles.
Acer Arcade lets you view digital photos individually or as a slideshow, from any available drive on your computer. Click the Album button on the Arcade Home page to show the Album main page.
The content area on the right shows both individual pictures and folders. Click on a folder to open it.
To view a slideshow, open the folder containing the pictures you wish to view then click Play slideshow. The slideshow is played full-screen. Use the pop-up control panel to control the slideshow. To rotate a picture in full-screen, click Rotate right or Rotate left. You can also view a single picture by clicking on it. This opens the picture full-screen.

Slideshow settings

To change slideshow settings click the Settings button on the Album page. The "Slide duration" setting determines how long each slide is shown before automatically advancing to the next picture in the slideshow. The "Transition effects" setting sets the style of transition used between pictures. To add background music to a slideshow, set the "Play music during slideshow" option to "Yes." The select music page asks you to choose music from your personal music library. Click Restore to factory settings to return your settings to their default values.
To open the Video function, click Video on the Arcade Home page.
Note: The Video feature is designed to play back MPEG1, MPEG2 (if a DVD drive is installed), AVI, WMV, and ASF formats. If you want to watch a DVD or VCD use the "Cinema" function. Two options are shown on the Video page: "Video Play" or "Video Edit."

Note: One of your local drive must contain at least 2 GB of free space in order to enable the instant replay function. Click " " to pause playback, " " to continue watching. Click " " to

rewind, or "

" to fast forward. Click "
" to go to the start of the instant
replay recording, or click "
" to go to the end of the instant replay recording.
Note: Since the TV content you watch always lags slightly behind the live TV broadcast, going to the end of the instant replay recording is as close to watching live TV as Arcade permits.

Recorded TV

The "Recorded TV" page shows recorded files using the "Recorded TV Shows" page of the "Video" function. A thumbnail image shows the first frame of the file. To play a recorded TV file, click it. The video will play full screen. To return to the TV page, click Stop. For a description of the options on this page, see Videos.

Scheduling Recordings

To set a TV recording schedule, click Schedule, then New schedule. In the page that opens, select the Channel you want to record and the Scheduling frequency. Set the Starting date, Starting time, and Ending time of the program you want to record. Click Confirm schedule to activate the recording schedule, or Cancel to quit without accepting the schedule. Select Delete schedule to remove a recording schedule you have previously created. Click an existing recording schedule to open it for modification. To change the order in which schedules are displayed, click Sort by channel or Sort by date.

TV Preview

Click the TV preview button to display a wall of TV screen thumbnails, previewing each channel. The TV Preview scrolls automatically through all of the available channels. Select a thumbnail to watch the corresponding channel.

Using TeleText Functions

This page displays TeleText listings with different kinds of information. To return to the main TV page, press the <Backspace> key. To navigate within the TeleText function, you can:

Disconnecting from the desktop
Follow these steps to disconnect your computer from external accessories: 7 Save any open files. Remove any media, floppy disks or compact disks, from the drive(s). Shut down the computer. Close the display cover. Disconnect the cord from the AC adaptor. Disconnect the keyboard, pointing device, printer, external monitor, and other external devices. Disconnect the Kensington lock if you are using one to secure the computer.

Moving around

When you are just moving within short distances, for example, from your office desk to a meeting room.

Preparing the computer

Before moving the computer, close and latch the display cover to place it in Sleep mode. You can now safely take the computer anywhere you go within the building. To bring the computer out of Sleep mode, open the display; then press and release the power button. If you are taking the computer to a client's office or a different building, you may choose to shut down the computer: Click on Start, Turn Off Computer; then click on Turn Off (Windows XP). or you can put the computer in Sleep mode by pressing <Fn> + <F4>. Then close and latch the display. When you are ready to use the computer again, unlatch and open the display; then press and release the power button.
Note: If the Sleep indicator is off, the computer has entered Hibernation mode and is turned off. If the power indicator is off but the Sleep indicator is on, the computer has entered Sleep mode. In both cases, press and release the power button to turn the computer back on. Note that the computer may enter Hibernation mode after being in Sleep mode for a period of time.
What to take to short meetings
A fully charged battery runs the computer for about 2.5 hours. If your meeting is shorter than that, you probably do not need to take anything with you other than the computer.
What to take to long meetings
If your meeting lasts longer than 2.5 hours, or if your battery is not fully charged, you may want to take the AC adaptor with you to plug in your computer while in the meeting room. If the meeting room does not have an electrical outlet, reduce the drain on the battery by putting the computer in Sleep mode. Press <Fn> + <F4> or close the display cover whenever you are not actively using the computer. To resume, open the display (if closed); then press and release the power button.
When you are moving from your office to your home or vice versa.
After disconnecting the computer from your desktop, follow these steps to prepare the computer for the trip home:
Check that you have removed all media and compact disks from the drive(s). Failure to remove the media can damage the drive head. Pack the computer in a protective case that can prevent the computer from sliding around and cushion it if it should fall.

Caution: Avoid packing items next to the top cover of the computer. Pressure against the top cover can damage the screen.

What to take with you

Unless you have some items at home, take the following items with you:
AC adaptor and power cord The printed User's Guide

Special considerations

Follow these guidelines to protect your computer while traveling to and from work:
Minimize the effects of temperature changes by keeping the computer with you. If you need to stop for an extended period of time and cannot carry the computer with you, leave the computer in the trunk of the car to avoid exposing the computer to excessive heat. Changes in temperature and humidity can cause condensation. Allow the computer to return to room temperature, and inspect the screen for condensation before turning on the computer. If the temperature change is greater than 10 C (18 F), allow the computer to come to room temperature slowly. If possible, leave the computer for 30 minutes in an environment with a temperature between outside and room temperature.

Setting up a home office

If you frequently work on your computer at home, you may want to purchase a second AC adaptor for use at home. With a second AC adaptor, you can avoid carrying the extra weight to and from home. If you use your computer at home for significant periods of time, you might also want to add an external keyboard, monitor, or mouse.
When you are moving within a larger distance, for instance, from your office building to a client's office building or traveling locally.
Prepare the computer as if you were taking it home. Make sure that the battery in the computer is charged. Airport security may require you to turn on your computer when carrying it into the gate area.
Take the following items with you:
AC adaptor Spare, fully-charged battery pack(s) Additional printer driver files if you plan to use another printer
In addition to the guidelines for taking the computer home, follow these guidelines to protect your computer while traveling:
Always take the computer as carry-on luggage. If possible, have the computer inspected by hand. Airport security X-ray machines are safe, but do not put the computer through a metal detector. Avoid exposing floppy disks to hand-held metal detectors.

When you are moving from country to country.
Prepare the computer as you would normally prepare it for traveling.

What to bring with you

Bring the following items with you:
AC adaptor Power cords that are appropriate for the country to which you are traveling Spare, fully-charged battery packs Additional printer driver files if you plan to use another printer Proof of purchase, in case you need to show it to customs officials International Travelers Warranty passport
Follow the same special considerations as when traveling with the computer. In addition, these tips are useful when traveling internationally:
When traveling in another country, check that the local AC voltage and the AC adaptor power cord specifications are compatible. If not, purchase a power cord that is compatible with the local AC voltage. Do not use converter kits sold for appliances to power the computer. If you are using the modem, check if the modem and connector is compatible with the telecommunications system of the country you are traveling in.

Securing your computer

Your computer is a valuable investment that you need to take care of. Learn how to protect and take care of your computer. Security features include hardware and software locks a security notch and passwords.
A security keylock notch, located on the left hand side of the computer, lets you connect a Kensington-compatible computer security lock. Wrap a computer security lock cable around an immovable object such as a table or handle of a locked drawer. Insert the lock into the notch and turn the key to secure the lock. Some keyless models are also available.

Using passwords

Passwords protect your computer from unauthorized access. Setting these passwords creates several different levels of protection for your computer and data:
Supervisor Password prevents unauthorized entry into the BIOS utility. Once set, you must enter this password to gain access to the BIOS utility. See "BIOS utility" on page 55. User Password secures your computer against unauthorized use. Combine the use of this password with password checkpoints on boot-up and resume from hibernation for maximum security. Password on Boot secures your computer against unauthorized use. Combine the use of this password with password checkpoints on boot-up and resume from hibernation for maximum security.
Important! Do not forget your Supervisor Password! If you forget your password, please get in touch with your dealer or an authorized service center.

The computer's IEEE 1394 port allows you to connect to an IEEE 1394compatible device like a video camera or digital camera. See your video or digital camera's documentation for details.

PC Card slot

The Type II PC Card slot of the computer accepts PC Cards that enhance the usability and expandability of the computer. These cards should have a PC Card logo on them. PC Cards (formerly PCMCIA) are add-on cards for portable computers, giving you expansion possibilities long afforded by desktop PCs. Popular PC Cards include flash, fax/data modem, wireless LAN and SCSI cards. CardBus improves on the 16-bit PC card technology by expanding the bandwidth to 32 bits.
Note: Refer to your card's manual for details on how to install and use the card, and its functions.

Inserting a PC Card

Insert the card into the slot and make the proper connections (e.g., network cable), if necessary. See your card manual for details.

Ejecting a PC Card

Before ejecting a PC Card: 3 Exit the application using the card. Left-click on the PC Card icon on the taskbar and stop the card operation. Press the slot eject button to pop out the eject button; then press it again to eject the card.

Installing memory

Follow these steps to install memory: 3 Turn off the computer, unplug the AC adaptor (if connected) and remove the battery pack. Then turn the computer over to access its base. Remove the screws from the memory cover; then lift up and remove the memory cover. (a) Insert the memory module diagonally into the slot, then (b) gently press it down until it clicks into place.
Replace the memory cover and secure it with the screw. Reinstall the battery pack, and reconnect the AC adaptor. Turn on the computer.
The computer automatically detects and reconfigures the total memory size. Please consult a qualified technician or contact your local Acer dealer.
The BIOS utility is a hardware configuration program built into your computer's BIOS. Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run it. To activate the BIOS utility, press <F2> during the POST; while the notebook PC logo is being displayed.

Boot sequence

To set the boot sequence in the BIOS utility, activate the BIOS utility, then select Boot from the categories listed at the top of the screen.
Enable Disk to disk recovery
To enable disk to disk recovery (hard disk recovery), activate the BIOS utility, then select Main from the categories listed at the top of the screen. Find D2D Recovery at the bottom of the screen and use the <F5> and <F6> keys to set this value to Enabled.

Password

To set a password on boot, activate the BIOS utility, then select Security from the categories listed at the top of the screen. Find Password on boot: and use the <F5> and <F6> keys to enable this feature.

Playing DVD movies

When the DVD drive module is installed in the optical drive bay, you can play DVD movies on your computer. 1 Eject the DVD tray and insert a DVD movie disk; then close the DVD tray.
Important! When you launch the DVD player for the first time, the program asks you to enter the region code. DVD disks are divided into 6 regions. Once your DVD drive is set to a region code, it will play DVD disks of that region only. You can set the region code a maximum of five times (including the first time), after which the last region code set will remain permanent. Recovering your hard disk does not reset the number of times the region code has been set. Refer to the table below for DVD movie region code information. 2 The DVD movie will automatically play after a few seconds. Country or region U.S.A., Canada Europe, Middle East, South Africa, Japan Southeast Asia, Taiwan, Korea (South) Latin America, Australia, New Zealand Former U.S.S.R., parts of Africa, India

Region code 5

Region code 6
Country or region People's Republic of China
Note: To change the region code, insert a DVD movie of a different region into the DVD drive. Please refer to the online help for more information.

Power management

This computer has a built-in power management unit that monitors system activity. System activity refers to any activity involving one or more of the following devices: keyboard, mouse, floppy drive, hard disk, peripherals connected to the serial and parallel ports, and video memory. If no activity is detected for a period of time (called an inactivity timeout), the computer stops some or all of these devices in order to conserve energy. This computer employs a power management scheme that supports the advanced configuration and power interface (ACPI), which allows for maximum power conservation and maximum performance at the same time. Windows handles all power-saving chores for your computer.

Acer eRecovery

Acer eRecovery is a tool to quickly backup and restore the system. You can create and save a backup of the current system configuration to hard drive, CD, or DVD. Acer eRecovery consists of the following functions: 5 Create backup Restore from backup Create factory default image CD Re-install bundled software without CD Change Acer eRecovery password

e f 12

The notebook PC series uses lithium batteries. Replace the battery with the same type as the product's battery we recommend in the product specification list. Use of another battery may present a risk of fire or explosion.
Warning! Batteries may explode if not handled properly. Do not disassemble or dispose of them in fire. Keep them away from children and dispose of used batteries promptly. To avoid hazard of unexpected electrical shock, use the AC adaptor only when the wall socket is properly grounded. Use only the proper type of power supply cord set (provided in your accessories box) for this unit. It should be a detachable type: UL listed/CSA certified, type SPT-2, rated 7 A 125 V minimum, VDE approved or its equivalent. Maximum length is 4.6 meteres (15 feet). Always disconnect all telephone lines from the wall outlet before serving or disassembling this equipment. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.
Laser compliance statement
The CD or DVD drive used with this computer is a laser product. The CD or DVD drive's classification label (shown below) is located on the drive. CLASS 1 LASER PRODUCT CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. APPAREIL A LASER DE CLASSE 1 PRODUIT LASERATTENTION: RADIATION DU FAISCEAU LASER INVISIBLE EN CAS DOUVERTURE. EVITTER TOUTE EXPOSITION AUX RAYONS. LUOKAN 1 LASERLAITE LASER KLASSE 1 VORSICHT: UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEFFNET NICHT DEM STRAHLL AUSSETZEN PRODUCTO LSER DE LA CLASE I ADVERTENCIA: RADIACIN LSER INVISIBLE AL SER ABIERTO. EVITE EXPONERSE A LOS RAYOS. ADVARSEL: LASERSTRLING VEDBNING SE IKKE IND I STRLEN. VARO! LAVATTAESSA OLET ALTTINA LASERSTEILYLLE. VARNING: LASERSTRLNING NR DENNA DEL R PPNAD L TUIJOTA STEESEENSTIRRA EJ IN I STRLEN VARNING: LASERSTRLNING NAR DENNA DEL R PPNADSTIRRA EJ IN I STRLEN ADVARSEL: LASERSTRLING NAR DEKSEL PNESSTIRR IKKE INN I STRLEN

LCD pixel statement

The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red
70 dots. This has no effect on the recorded image and does not constitute a malfunction.
Macrovision copyright protection notice

Is in compliance with the essential requirements and other relevant provisions of the following EC directives. Reference No. 89/336/EEC 73/23/EEC 1999/5/EC Title Electromagnetic Compatibility (EMC directive) Low Voltage Directive (LVD) Radio & Telecommunications Terminal Equipment Directive (R&TTE)
The product specified above was tested conforming to the applicable Rules under the most accurate measurement standards possible, and that all the necessary steps have been taken and are in force to assure that production units of the same product will continue to comply with the requirements. 2005/01/19 Easy Lai / Director Qualification Center Product Assurance Date
Declaration of Conformity for CE Marking
AC adapter caring for iv audio 18 adjusting the volume troubleshooting 24 18
turning off iii connections network 52
display hotkeys 15 troubleshooting DVD 56 DVD movies playing 56 23
battery pack caring for v BIOS utility 55 brightness hotkeys 15
error messages Euro 16 61
FAQ. See frequently-asked questions frequently-asked questions 23 front view 2
caps lock 13 on indicator 9 care AC adapter iv battery pack v computer iv CD-ROM ejecting 17 ejecting manually 24 troubleshooting 24 cleaning computer v computer bringing to meetings 44 caring for iv cleaning v disconnecting 43 features 1, 20 indicators 9 keyboards 13 moving around 43 on indicator 2, 9 performance 7 security 48 setting up a home office 45 taking home 44 traveling internationally 46 traveling on local trips 45 troubleshooting 61
Hibernation mode hotkey 15 hotkeys 14
IEEE 1394 port 53 indicator lights 9 infrared 52
keyboard 13 embedded numeric keypad hotkeys 14 lock keys 13 troubleshooting 24 Windows keys 14 13

LEDs 9 left view 2

media access on indicator 9 memory installing 55 messages error 61
modem 51 general instructions 67 modem notices 65 scroll lock 13 security keylock 17, 48 passwords 48 speakers hotkey 15 troubleshooting 24 status indicators 9 support information 27
network 52 Notebook Manager hotkey 15 num lock 13 on indicator 9 numeric keypad embedded 13
password 48 types 48 PC Card 54 ejecting 54 inserting 54 ports 51 printer troubleshooting problems 23 CD-ROM 24 display 23 keyboard 24 printer 24 startup 23 troubleshooting
touchpad 11 hotkey 15 using travel international flights local trips 45 troubleshooting 61 tips 61
universal serial bus 61 53
view front 3 left 3 rear 4 right 3 volume adjusting
questions setting location for modem use 25
safety CD or DVD FCC notice 69 63

Windows keys 14