IDE Interface Item IDE Controller IDE Controller Resident Bus Number of 40 pin PATA slot Device Type Support Transfer Rate Support ATA Mode Number of SATA IDE slot Device Type Support Supports LS-120 Supports bootable CD-ROM Function Control Diskette Drive Interface Item Diskette Drive Controller Diskette Drive Controller Resident Bus Supported Diskette Drive Formats Function Control IT8712F LPC Bus 1.44MB, 2.88MB format and slim type diskette drive Enable/Disable by BIOS Setup Specification Built-in ICH7 PCI bus 1 HDD, CD-ROM, CD-RW, DVD-ROM,Combo,DVD burner PIO 0/1/2/3/4 33/66/HDD,CD-ROM,CD-RW,DVD-ROM,DVD-RW,DVD+RW,DVD Dual,DVD Supermultiplus Yes Yes Enable/Disable by BIOS setup Specification
Serial Port Item Serial port controller Serial port controller resident bus Number of serial port Serial port location 16550 UART support Connector type IT8712F LPC Bus 1 Rear panel Yes 9-pin D-type female connector Specification
USB Port Item Universal HCI Controller Location and Number USB Class Wake-up Event Specifications
Device Power Button PS2 Keyboard USB Keyboard PME WOR (wake on Ring) RTC (real time clock) S1 S3 S4 S5
Specification USB 2.0/1.1 Intel ICH7 VT2800: Front x 4 ; Rear x 4 AS L300:Front x 2 ; Rear x 4 Support legacy keyboard for legacy mode
Enabled Disabled Disabled Disabled Disabled Disabled
Enabled Disabled N/A Disabled Disabled Disabled

Thermal Design

Item Thermal Design Description
Provision for optional secondary fan Adequate venting in the front of chassis Adequate venting in the rear of chassis
Environmental Requirements Item Temperature Operating Non-operating Humidity Operating Non-operating Vibration Operating (unpacked) Non-operating (packed) Shock Operating 5 ~ 500Hz, 2.20g RMS random,10 minutes per axis in all 3 axes 5 ~ 500Hz, 1.09g RMS random,1 hour per axis in all 3 axes Half sine, 2g 11m seconds 15% to 80% RH, non-condensing 10% to 90% RH, non-condensing at 40C +5C ~ +35C -20 ~ +60C (Storage packed), -10C~+60C (un-packed) Specifications

Drop Test

Drop Test Definition The protection ability of packing & cushion must be capable of withstanding, with no physical or functional demage, mechanical impact from height-specific drops.

Drop Test Test Standard Package Cross Weight KGs 0~9.1 9.1~18.2 18.2~27.3 27.3~45.4 0~20 20~40 40~60 60~100 lbs CM Drop Height Inch Not of Drop
10 drops : one corner, three edges, six surfaces
Power Management Function ( ACPI support function)

Device Standby Mode

Independent power management timer for hard disk drive devices (0-15 minutes, time step=1 minute). Hard disk drive goes into Standby mode (for ATA standard interface). Disable V-sync to control the VESA DPMS monitor. Resume method: device activated (Keyboard for DOS, keyboard & mouse for Windows). Resume recovery time: 3-5 sec.

Global Standby Mode

Global power management timer (2-120 minutes, time step=10 minute). Hard disk drive goes into Standby mode (for ATA standard interface). Disable H-sync and V-sync signals to control the VESA DPMS monitor. Resume method: Return to original state by pushing external switch button, modem ring in, keyboard and mouse for APM mode. Resume recovery time: 7-10 sec.

Suspend Mode

Independent power management timer (2-120 minutes, time step=10 minutes) or pushing external switch button. CPU goes into SMM. CPU asserts STPCLK# and goes into the Stop Grant State. LED on the panel turns amber colour. Hard disk drive goes into SLEEP mode (for ATA standard interface). Disable H-sync and V-sync signals to control the VESA DPMS monitor. Ultra I/O and VGA chip go into power saving mode. Resume method: Return to original state by pushing external switch button, modem ring in, keyboard and mouse for APM mode. Return to original state by pushing external switch button, modem ring in and USB keyboard for ACPI mode.
ACPI specification 1.0b. S0, S1, S3 and S5 sleep state support. On board device power management support. On board device configuration support.

Chapter 2

System Utilities
BIOS (Basic Input and Output System) includes a CMOS SETUP utility which allows user to configure required setting or to active certain system features. The CMOS SETUP saves the configuration in the CMOS SRAM of the mainboard. When the power is turned off, the battery on the mainboard supplies the necessary power to the CMOS SRAM. When the power is turned on, pushing the <Del> button during the BIOS POST (Power-On Self Test) will take you to the CMOS SETUP screen. You can enter the BIOS setup screen by pressing Ctrl+F1. When setting up BIOS for the first time, it is recommended that you save the current BIOS to a disk in the event that BIOS needs to be reset to its original settings. Q-Flash allows the user to quickly and easily update or backup BIOS without entering the operating system. BIOS is a Window s-based utility that doesnt required users to boot to DOS before upgrading BIOS but directly download and update BIOS from the Internet.

Control Keys Item wxyz e ^ Move to selection Select Item Main Menu: Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu, Exit current page and return to Main Menu. Increase the numeric value or make changes Decrease the numeric value or make changes General help, only for Status Page Setup Menu and Option Page Setup Menu Item Help Restore the previous CMOS value from CMOS, only for option Page Setup Menu Load the Optimized Defaults System Information Save all the CMOS changes, only for Main Menu Description

{ } l m p r t u

NOTE: Main Menu: This is the online description of the highlighted setup functions is displayed at the bottom of the screen. NOTE: Status Page Setup Menu/ Option Page Setup Menu: Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press <Esc>.

Entering Setup

Once enter Award BIOS CMOS Setup Utility, the Main Menu (as figure below) will appear on the screen. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu. Note: If you cant find the setting you want, please press Alt+F4 to search the advanced option hidden. As for the hidden options, we have annotations following those with further setting screen menu.
Phoenix - AwardBIOS CMOS Setup Utility Product Information Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/PCI Configurations Esc:Quit F10: Save & Exit Setup PC Health Status Frequency Control Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving : Select
Parameter Product Information Standard CMOS Features Advanced BIOS Features Advanced Chipset Features
Description This page shows the relevant information of the mainboard This setup page includes all the items in standard compatible BIOS This setup page includes all the items of Award special enhanced features The values for the chipset can be changed through this menu, and the system performance can be optimized This setup page includes all onboard peripherals This setup page includes all the items of Green function features This setup page includes all configurations of PCI&PnP ISA resources This setup page is the System auto detect Temperature, voltage, fan and speed This setup page includes all the items of Frequency Control Default Settings indicates the value of the system parameters which the system would be in best performance configuration Change, set or disable password. It allows you to limit access to the system and Setup, or just to Setup Change, set or disable password. It allows you to limit access to the system Save CMOS value settings to CMOS and exit setup Abandon all CMOS value changes and exit setup

IDE channel 0/1 Master, Slave
Allows you to configure the hard disk drive connected to the master port of IDE channel. To enter the IDE Master or Slave setup, press [Enter]. The IDE CD-ROM is always automatically detected.
Cylinder : Number of cylinders Head : Number of heads Precomp : Write precomp Landing Zone : Landing Zone Sector : Number of sectors
Access Mode allows you to select the access mode. The options are CHS, LBA, Large, and Auto. Video This item allows user to select the video mode. EGA/VGA CGA 40 CGA 80 MONO

Parameter Halt On

Description This parameter enables you to control the system stops in case of Power On Self Test errors (POST)
Options No Errors : The system boot will not stop for any error that may be detected and you will be prompted All Errors : Whenever the BIOS detects a non-fatal error the system will be stopped All, But Keyboard : The system boot will not stop for a keyboard error; it will stop for all other errors (Default value) All, But Diskette : The system boot will not stop for a disk error; it will stop for all other errors All, But Disk/Key : The system boot will not stop for a keyboard or disk error; it will stop for all other errors.

Advanced BIOS Features

The following screen shows the Advanced BIOS Features:
Phoenix - AwardBIOS CMOS Setup Utility Advanced BIOS Features Hard Disk Boot Priority [Press Enter] Help Item Virus Warning [Disabled] Silent Boot [Enabled] Menu Level Quick Power On Self Test [Enabled] First Boot Device [Enabled] Second Boot Device [Enabled] Third Boot Device [Enabled] Boot Other Device [Disabled] Boot Up NumLock Status [On] Gate A20 Option [Fast] Security Option [Setup] APIC Mode Enabled MPS Version Control For OS [1.4] Configuration Table [Disabled]
Parameter Hard Disk Boot Priority
Description Press [Enter] to enter the sub menu to select Hard Disk Boot Device Priority. This feature allows you to enable the VIRUS warning function for IDE Hard Disk boot sector protection. If this function is enabled and there is someone attempt to write data into this area, BIOS will show a warning message on screen and the alarm will beep. This features allows you to enable or disable if the screen logo to display or no during POST This feature allows the system to skip certain tests while booting. When this function is enabled, it will decrease the time needed to boot the system, which means to quick power on self test function The item allows you to set the sequence of boot device where BIOS attempts to load the disk operating system. This item allows you to enable or disable to boot from other device This item allows you to enable or disable to set keyboard is number keys or arrow keys This option is used to set up the A20 signal control necessary for access to the 1MB memory. Select whether the password is required every time the system boots or only when you enter setup. This feature allows you to enable or disable if showing summary screen or not

Options Use wx to select a device, then press<+> to move it up, or < - > to move it down the list. Enabled Disabled

Virus Warning

Silent Boot Quick Power On Self Test
Enabled Disabled Enabled Disabled
First / Second / Third Boot Device Boot other Devices Boot Up NumLock Status Gate A20 Option
Floppy, LS120, Hard Disk, CD-ROM, ZIP, USB-FDD, USB-ZIP, USBCDROM, USB-HDD, LAN, Disabled Enabled Disabled Enabled Disabled Fast : Let chipset control Gate 20 Normal : A pin in the keyboard controller System Setup Enabled Disabled Enabled Disabled Enabled Disabled

Security Option

Configuration Table Hidden Setting Description APCI Mode Bootblock Write Protect
This option is used to set up enable or disable the APCI funtion
Advanced Chipset Features
Phoenix - AwardBIOS CMOS Setup Utility Advanced Chipset Features DRAM Timing Selectable By SPD Help Item x CAS Latency Time Auto x DRAM RAS# to CAS# Delay Auto Menu Level x DRAM RAS# Precharge Auto x Precharge delay (tRAS) Auto SLP_S4# Assertion Width 4 to 5 Sec. ** VGA Setting ** On-chip Video Memory Size PEG/Onchip VGA Control DVMT Mode
[Press Enter] [Auto] [DVMT]
Parameter CAS Latency TIme
Description When synchronous DRAM is installed, the number of clock cycles of CAS latency depends on the DRAM timing.
Options 5,4,3,6,Auto 2,3,4,5,6,Auto
DRAM RAS# to CAS# Delay This field lets you insert a timing delay between the CAS and RAS strobe signals, used when DRAM is written to, read from, or refreshed, Fast gives faster performance; and Slow gives more stable performance. This field applies only when synchronous DRAM is installed in the system. DRAM RAS# Precharge TIme If an insufficient number of cycles is allowed for the RAS to accumulate its charge before DRAM refresh, the refresh may be incomplete and the DRAM may fail to retain data. Fast fives faster performance; and Slow gives more stable performance.This field applies only when synchronous DRAM is installed in the syste. This option is used to set up the timing delay between the SDRAM active to precharge. Select the on chip memory size for VGA drive use. This option is used to control the VGA

2,3,4,5,6,Auto

Precharge Delay On Chip Memory Size PEG/Onchip VGA Control
4,5,6,7,8,9,10,11, 12,Auto Onchip VGA PEG Port Auto

DVMT Mode

This option is used to select the video mode.

USB Mouse Support

Enabled : Enable USB Mouse Support Disabled : Disable USB Mouse Support
Azalia Select Onboard 1394 Onboard LAN Function Onboard LAN Boot ROM Super IO Device POWER ON Function
Auto DIsabled Enabled Disabled Enabled Disabled Enabled Disabled BUTTON ONLY Any KEY
This function allows user to select the power on mode.
Parameter Onboard Serial Port 1/2
Description This option is used to assign the I/O address and interrupt request (IRQ) for onboard serial port 1 or 2
Options Auto : BIOS will automatically setup the port 1 or 2 address 3F8/IRQ4 (Serial Port 1 default) 2F8/IRQ3 (Serial Port 2 default) 3E8/IRQ4 2E8/IRQ3 Diabled : Disable onboard Serial port 1 or 2

Parallel Port Mode

This feature allows to select the Parallel Port Mode.
SPP EPP1.9+SPP ECP EPP1.9+ECP PRINTER EPP1.7+SPP EPP1.7+ECP

Power Management Setup

The Power Management menu lets you configure your system to most effectively save energy while operating in a manner consistent with your own style of computer use.
Phoenix - AwardBIOS CMOS Setup Utility Power Management Features PCI Express PM Function [Press Enter] Help Item Sleep Mode [S3(STR)] Run VGABIOS if S3 Resume [Auto] Menu Level PWRON After PWR-Fail [Former-Sts] CPU THRM-Throttling [50.0%] Wake-Up by PCI card [Disabled] Power On by Ring [Disabled] USB KB Wake-Up From S3 [Disabled] Resume by Alarm [Disabled] x Date(of Month) Alarm 0 x Time(hh:mm:ss) Alarm 0:0:0
Parameter PCI Express PM Function Sleep Mode
Description This item allows user to enable or disable the PCI express PME function This item specifies the power saving modes for ACPI function. S1(POS): The S1 sleep mode is a low power state. In this state, no system context (CPU or chipset) is lost and hardware maintains all system context. S3 (STR): The S3 sleep mode is s power-down state in which power is supplied only to essential components such as main memory and wake-capable devices and all system context is saved to main memory. The information stored in memory will be used to restore the PC to the previous state when an wake-up event occurs. This item allows user to enable or disable running VGABIOS if S3 resume. This item allows users computer to automatically restart to return to its last operating status after power returns from a power failure. This item allows user to select the CPU THRMThrottling. This item allows the activity of the PCI devices to wake up the system from S3 sleep state. An input signal on the serial Ring indicator line( in other words, and incoming call on the modem) awakens the system from a soft off state. This item allows user to enable or disable wake-up from S3. If the computer was shut down improperly last time. A machine may not be waked up after a power loss when the AC power is restored.If you want the machine to power on automatically when AC power back, you can configure this BIOS setup. You can set Resume by Alarm item to enabled and key in Data/Time to power on system Enabled Disabled

S1 (POS) : Set ACPI suspend type to S1/POS(Power On Suspend). S3 (STR) : Set ACPI suspend type to S3/STR S1&S3
Run VGABIOS if S3 Resume PWRON After PWR-Fail
Enabled Disabled Off On Former-Sts 25.0%, 37.5%, 50.0%, 62.5%, 75.0%, 87.5% Enabled Disabled Enabled Disabled Enabled Disabled SOFT-OFF Full-On Memory
CPU THRM-Throttling Wake-Up by PCI card Power On by Ring
USB KB Wake-Up From S3 AC BACK Function

Resume by Alarm

Disabled : Disable this function Enabled : Enable alarm function to Power On system If RTC Alarm Lead To Power On is Enabled. Date (of Month) Alarm : Everyday, 1~31 Time (hh:mm:ss) Alarm: (0.~23):(0~59):(0~59)
Hidden Setting Description ACPI Function Soft-off by PWR-BTTN This item displays the ACPI status. This feature allows users to configure the power button function. Instand-off : Press down button then power off instantly Delay 4 Sec. : Press power button 4 sec. to power off. Enter suspend if button is pressed less than 4 sec.

PnP/PCI Configuration

Phoenix - AwardBIOS CMOS Setup Utility PNP/PCI Configuration Reset Configuration Data [Disabled] Resources Controlled By IRQ Resources PCI/VGA Palette Snoop [Manual] [Press Enter] [Disabled]
Parameter Reset Configuration Data Disabled
Option Select Enabled to reset extended system configuration data(ESCD) when you exit Setup if you have installed a new add-on and the system reconfiguration has caused such a serious conflict that the OS cannot boot.

Resource Controlled By

Auto : Assign PnP resource (I/O address, IRQ& DMA channels) for Plug and Play compatible devices automatically. Manual : Assign resource manually When resource are controlled by manually, assign each system interrupt a type, depending on the type of device using the interrupt. PCI Device : Assign this IRQ for PCI device Reserved : Reserve this IRQ for other device

IRQ Resource

PCI/VGA Palette Snoop
Enabled : Enable PCI/VGA Palette Snoop function Disabled : Disable this function

PC Health Status

Phoenix - AwardBIOS CMOS Setup Utility PC Health Status Smart Fan Function [Enabled] Current CPU Temperature 55 o C/131 o F Current System Temperature 45 o C/113 o F Vcore 1.36 V +12.0V 12.02 V +3.3V 3.23 V +5.V 5.01 V +1.5V 1.49 V CPU Fan Speed 0 RPM
Parameter System Smart Fan Function
Description This item allows user to enable or disabled the smart fan function. Detect systems voltage status automatically Detect CPU/System Temperature automatically Detect CPU Fan Speed status automatically 80 C/176 F, 85 C/185 F, 90 C/194 F, 95 C/203 F Disabled Enabled Disabled

Disconnect the HDD SATA connector from the Mainboard.
DIsconnect the USB connectors from the Mainbaord.
Disconnect the Audio connector from the Mainboard.
Disconnect the ODD IDE connector from the Mainboard.
Disconnect the ATX Power connector from the Mainboard.
Disconnect the ODD IDE and power cable from the ODD.
Disconnect the HDD SATA and power cable from the HDD.
Disconnect the ATX 12V power connector from mainboard.
10. Disconnect the system fan and CPU fan connector from the Mainboard.

CPU fan

System fan
11. Disconnect the LED connector from mainboard.

Removing the Front Bezel

1. 2. Release the three latches that latch the front bezel. Remove the front bezel as show.

Removing the HDD/ODD

1. Remove the two screws securing the HDD bracket.
Push the bracket outward and remove it.
Remove the four screws securing the ODD and remove the ODD from the bracket.
Remove the four screws securing the HDD and remove it from the bracket.
Remove the two screws securing the card reader and remove it. (AS L300 only)
Removing the Heatsink Module
1. Remove the four screws securing the heatsink module and remove it.

Removing the Fan Duck

1. Release the two screws securing the fan duck and remove it.

Removing the System Fan

1. Remove the four screws securing the system fan and remove it.
Removing the Daughter Board
1. Remove the screw securing the daughter board.

Removing the Riser Card

1. Remove the two screws securing the PCI Express riser card.
Remove the PCI riser card from the mainboard PCI slot.
Remove the PCI express riser card from the mainboard PCI express slot.

Removing the Mainboard

1. Remove the eight screws securing the mainboard and remove it.

Removing the Memory

1. Loose the DIMM latch and pop out the memory as shown.
Removing the CPU from the MB
1. Release the CPU latch and remove the CPU from the MB.
Removing the System Power
1. Remove the four screws securing the system power and remove it.

Chapter 4

Troubleshooting
This chapter provides troubleshooting information. Power-On Self-Test (POST) Index of Error Message Index of Error Symptoms Undetermined Problems
Power-On Self-Test (POST)
Each time you turn on the system, the Power-on Self Test (POST) is initiated. Several items are tested during POST, but is for the most part transparent to the user. The Power-On Self Test (POST) is a BIOS procedure that boots the system, initializes and diagnoses the system components, and controls the operation of the power-on password option. If POST discovers errors in system operations at power-on, it displays error messages on screen, generates a check point code at port 80h or even halts the system if the error is fatal. The main components on the main board that must be diagnosed and/or initialized by POST to ensure system functionality are as follows: Microprocessor with built-in numeric co-processor and cache memory subsystem Direct Memory Access (DMA) controller Interrupt system Three programmable timers ROM subsystem RAM subsystem CMOS RAM subsystem and real time clock/calendar with battery backup Onboard parallel interface controller Embedded hard disk interface and one diskette drive interface Keyboard and auxiliary device controllers 1.44M floppy controller I/O ports One parallel port One PS/2-compatible mouse port One PS/2-compatible keyboard port NOTE: When Post executes a task, it uses a series of preset numbers called check points to be latched at port 80h, indicating the stages it is currently running. This latch can be read and shown on a debug board. The following table describes the BIOS common tasks carried out by POST. Each task is denoted by an unique check point number. For other unique check point numbers that are not listed in the table, refer to the corresponding product service guide. Post Checkpoints List: The list may vary accordingly depending on your BIOS. Checkpoint CFh C0h Test CMOS R/W functionality Early chipset initialization: -Disable shadow RAM -Disable L2 cache (socket 7 or below) -Program basic chipset registers Detect memory -Auto-detection of DRAM size, type and ECC. -Auto-detection of L2 cache (socket 7 or below) Expand compressed BIOS code to DRAM Call chipset hook to copy BIOS back to E000 & F000 shadow RAM. Expand the Xgroup codes locating in physical address 1000:0 Reserved Chapter 4 Description

C3h C5h 01h 02h 50

. Checkpoint 03h 04h 05h 06h 07h 08h 09h 0Ah Initial Superio_Early _Init switch Reserved 1. Blank out screen 2. Clear CMOS error flag Reserved 1. Clear 8042 interface 2. Initialize 8042 self-test 1. Test special keyboard controller for Winbond 977 series Super I/O chips. 2. Enable keyboard interface. Reserved 1. Disable PS/2 mouse interface (optional) 2. Auto detect ports for keyboard & mouse followed by a port & interface swap (optional). 3. Reset keyboard for Winbond 977 series Super I/Q chips. Reserved Reserved Reserved Test F000h segment shadow to see whether it is R/W-able or not. If test fails, keep beeping the speaker. Reserved Auto detect flash type to load appropriate flash R/W codes into the run time area in F000 for ESCD & DMI support. Reserved Use walking 1s algorithm to check out interface in CMOS circuitry. Also set realtime clock power status, and then check for override. Reserved Program chipset default values into chipset. Chipset default values are MODBINable by OEM customers. Reserved Initial Early_Init_Onboard_Generator switch. Reserved Detect CPU information including brand, SMI type (Cyrix or Intel) and CPU level (586 or 686) Reserved Reserved Initial interrupts vector table. If no special specified, all H/W interrupts are directed to SPURIOUS_INT_HDLR & S/W interrupts to SPURIOUS_soft_HDLR. Reserved Initial Early_PM_INIT switch. Reserved Load keyboard matrix (notebook platform) Reserved HPM initialization (notebook platform) Reserved 51 Description
0Bh 0Ch 0Dh 0Eh 0Fh 10h 11h 12h 13h 14h 15h 16h 17h 18h 19h 1Ah 1Bh
1Ch 1Dh 1Eh 1Fh 20h 21h 22h Chapter 4
. Checkpoint 23h Description 1. Check validity of RTC value: e.g. a value of 5Ah is an invalid value for RTC minute. 2. Load CMOS settings into BIOS stack. If CMOS checksum fails, use default value instead. 3. Prepare BIOS resource map for PCI & PnP use. If ESCD is valid, take into consideration of the ESCDs legacy information. 4. Onboard clock generator initialization. Disable respective clock resource to empty PCI & DIMM slots. 5. Early PCI initialization -Enumerate PCI bus number -Assign memory & I/O resource -Search for a valid VGA device and VGA BIOS, and put it into C000:0 Reserved Reserved Reserved Initialize INT 09 buffer Reserved 1. Program CPU internal MTRR (P6 & PII) for 0-640K memory address. 2. Initialize the APIC for Pentium class CPU. 3. Program early chipset according to CMOS setup. Example: onboard IDE controller. 4. Measure CPU speed. 5. Invoke video BIOS. Reserved Reserved Reserved 1. Initialize multi-language 2. Put information on screen display, including Award title, CPU type, CPU speed. Reserved Reserved Reserved Reserved Reserved Reset keyboard except Winbond 977 series Super I/O chips. Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved

24h 25h 26h 27h 28h 29h

2Ah 2Bh 2Ch 2Dh
2Eh 2Fh 30h 31h 32h 33h 34h 35h 36h 37h 38h 39h 3Ah 3Bh
. Checkpoint 3Ch 3Dh 3Eh 3Fh 40h 41h 42h 43h 44h 45h 46h 47h 48h 49h 4Ah 4Bh 4Ch 4Dh 4Eh Test 8254. Reserved Test 8259 interrupt mask bits for channel 1 Reserved Test 8259 interrupt mask bits for channel 2 Reserved Reserved Test 8259 functionality Reserved Reserved Reserved Initialize EISA slot Reserved 1. Calculate total memory by testing the last double word of each 64K. 2. Program writes allocation for AMD K5 CPU. Reserved Reserved Reserved Reserved 1. Program MTRR of M1 CPU. 2. Initialize L2 cache for P6 class CPU & program CPU with proper cacheable range. 3. Initialize the APIC for P6 class CPU. 4. On MP platform, adjust the cacheable range to smaller one in case the cacheable ranges between each CPU are not identical. Reserved Initialize USB Reserved Test all memory (clear all extended memory to 0) Reserved Reserved Display number of processors (multi-processor platform) Reserved 1. Display PnP logo 2. Early ISA PnP initialization -Assign CSN to every ISA PnP device. Reserved Initialize the combined Trend Anti-Virus code. Reserved (Optional Feature) Show message for entering AWDFLASH.EXE from FDD (optional) Reserved Description
4Fh 50h 51h 52h 53h 54h 55h 56h 57h

58h 59h 5Ah 5Bh 5Ch

. Checkpoint 5Dh 5Eh 5Fh 60h 61h 62h 63h 64h 65h 66h 67h 68h 69h 6Ah 6Bh 6Ch 6Dh Description 1. Initialize Init_Onboard_Super_IO switch. 2. Initialize Init_Onboard_AUDIO switch. Reserved Reserved Okay to enter Setup utility; i.e. not until this POST stage can users enter the CMOS setup utility. Reserved Reserved Reserved Reserved Initialize PS/2 Mouse Reserved Prepare memory size information for function call: INT 15h ax=E820h Reserved Turn on L2 cache Reserved Program chipset registers according to items described in Setup& Autoconfiguration table. Reserved 1. Assign resources to all ISA PnP devices. 2. Auto assign ports to onboard COM ports if the corresponding item in Setup is set to AUTO Reserved 1. Initialize floppy controller 2. Set up floppy related fields in 40: hardware. Reserved Reserved Reserved (Optional Feature) Enter AWDFLASH.EXE if: -AWDFLASH is found in floppy drive -ALT+F2 is pressed Reserved Detect & install all IDE devices: HDD, LS120, ZIP,CDROM.. Reserved Detect serial ports & parallel ports Reserved Reserved Detect & install co-processor Reserved Reserved Reserved Chapter 4

BIOS Messages BIOS ROM checksum error - System halted
Action/FRU The checksum of the BIOS code in the BIOS chip is incorrect, indicating the BIOS code may have become corrupt. Contact your system dealer to replace the BIOS. The CMOS battery is no longer functional. Contact your system dealer for a replacement the BIOS. Checksum of CMOS is incorrect, so the system loads the default equipment configuration. A checksum error may indicate that CMOS has become corrupt. A weak battery may have caused this error. Check the battery and replace if necessary. Displays the running speed of CPU. The display switch on the motherboard can be set to either monochrome or color. This message indicates the switch is set to a different setting than indicated in Setup. Determine which setting is correct, and then either turn off the system and change the jumper, or enter Setup and change the Video selection. The user may press Esc to skip the full memory test. Cannot find or initialize the floppy drive controller or the drive. Make sure the controller is installed correctly, if no floppy drives are installed, be sure the Diskette Drive selection in Setup is set to NONE or AUTO. Some hard drives require extra time to initialize. Cannot find or initialize the hard drive controller or the drive. Make sure the controller is installed correctly. If no hard drives are installed, be sure the Hard Drive Selection in Setup is set to NONE. The system may run specific disk diagnostic routines. This message appears if one or more hard disks return an error when the diagnostics run.
CMOS Battery Failed CMOS Checksum Error- defaults loaded
CPU at nnnn Display switch is set incorrectly
Press ESC to skip memory test Floppy disk(s) fail
HARD DISK initializing - Please wait a moment HARD DISK INSTALL FAILURE
Hard disk(s) diagnosis fail
BIOS Messages Keyboard Error Or No Keyboard Present
Action/FRU Cannot initialize the keyboard. Make sure the keyboard is attached correctly and no keys are pressed during POST. To purposely configure the system without a keyboard, set the error halt condition in Setup to HALT ON ALL, BUT KEYBOARD. The BIOS then ignores the missing keyboard during POST. This message usually indicates that one or more keys have been pressed during the keyboard tests. Be sure no objects are resting on the keyboard. This message displays during a full memory test, counting down the memory areas being tested. If POST detects an error during memory testing, additional information appears giving specifics about the type and location of the memory error. If the system cannot boot using the current CMOS configuration, the BIOS can override the current configuration with a set of BIOS defaults designed for the most stable, minimal-performance system operations. System OEMs may replace the Phoenix Technologies Award BIOS POST display with their own proprietary display. Including this message in the OEM display permits the operator to switch between the OEM display and the default POST display. POST detects an error in the primary master IDE hard drive. POST detects an error in the secondary master IDE hard drive. POST detects an error in the primary slave IDE hard drive. POST detects an error in the secondary slave IDE hard drive.

CD/DVD-ROM drive can play audio CD but no sound output.
Real-time clock is inaccurate.
Audio software program invokes but no sound comes from speakers. Modem ring cannot wake up system from suspend mode.
1. For the External Modem, make sure Power on By Ring in BIOS Setup or Power Management is set to Enabled. For the PCI modem, make sure Wake up by PCI card is set to Enabled. 2. If PCI modem card is used, reinsert the modem card to PCI slot firmly or replace the modem card. 3. In Win 98, ensure the telephone application is configured correctly for your modem and set to receive messages and/or fax. 1. Ensure the modem card is installed properly.
Data/fax modem software program invokes but cannot receive/send data/ fax Fax/voice modem software program invokes but has no sound output. (Data files are received normally; voice from modem cannot be produced, but system sound feature works normally.) Video memory test failed. Video adapter failed. Display problem: - Incorrect colors No high intensity Missing, broken, or incorrect characters Blank monitor (dark) Blank monitor (bright) Distorted image Unreadable monitor Other monitor problems Display changing colors.
1. Ensure the modem voice-in cable from modem adapter card to main board
Video and Monitor 1. Remove all non-factory-installed cards. 2. Load default settings (if screen is readable). 3. Main board 1. 2. 3. 4. Monitor signal connection/cable. Monitor Video adapter card Main board
1. Monitor signal connection/cable 2. Monitor 3. Main board
Error Symptom Display problem not listed above (including blank or illegible monitor).
Action/FRU 1. Monitor" 2. Load default settings (if screen is readable). 3. Main board
Error Symptom Parallel/Serial Ports
Execute Load BIOS Default Settings in BIOS Setup to confirm ports presence before diagnosing any parallel/serial ports problems. Serial or parallel port loop-back test failed. 1. Make sure that the LPT# or COM# you test is the same as the setting in BIOS Setup. 2. Loop-back. 3. Main board. 1. Ensure the printer driver is properly installed. Refer to the printer service manual. 2. Printer. 3. Printer cable. 4. Main board. 1. Refer to the service manual for the printer. Keyboard Some or all keys on keyboard do not work. Pressing power switch does not turn off system. (Only unplugging the power cord from electrical outlet can turn off the system.) Pressing power switch does not turn on the system. 1. Keyboard Power Supply 1. Ensure the Soft-off by PWR-BTTN. in BIOS Setup of Power Management is not set to Instant-off. 2. Power switch cable assembly 1. Ensure the power override switch (situated at the back of the machine, just above the connector for the power cable) is not set to OFF. 2. Power switch cable assembly. 1. Load default settings. 2. Reload software from Recovery CD.

Veriton 2800 Series

User's Guide
Copyright 2005. Acer Incorporated. All Rights Reserved. Veriton 2800 Series User's Guide Original Issue: August 2005
Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose. Record the model number, serial number, purchase date, and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your computer. All correspondence concerning your unit should include the serial number, model number, and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording, or otherwise, without the prior written permission of Acer Incorporated.
Veriton 2800 Series Desktop Computer
Model number: __________________________________ Serial number: ___________________________________ Purchase date: ___________________________________ Place of purchase: ________________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.

Disposal instructions

Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle it.
USA For electronic products containing an LCD/CRT monitor or display: Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org.
Specifications Package contents Accessing the User's Guide

2 System tour

Features Performance Multimedia Connectivity Front and rear panels Keyboard Internet/Email/Search keys Multimedia keys Volume control/mute keys Lock keys Cursor keys Windows keys Function keys Palm rest Optical drive Taking care of your CDs and DVDs Hard disk
3 Setting up your computer
Arranging a comfortable work area Adjusting your chair Positioning your PC Positioning your monitor Positioning your keyboard Positioning your mouse Connecting peripherals Connecting your mouse and keyboard USB interface PS/2 interface Connecting a monitor Connecting the power cable Turning on your computer Turning off your computer Connecting options Connecting your printer Connecting the modem (optional) Connecting to the network

Contents

1 First things first
Connecting multimedia devices Connecting USB devices
4 Upgrading your computer
Installation precautions ESD precautions Preinstallation instructions Post-installation instructions Opening your Veriton 2800 To remove the computer cover To replace the computer cover System boards Mainboard layout Upgrading your computer Installing additional memory To remove a DDR2 DIMM To install a DDR2 DIMM To reconfigure your computer Replacing the Veriton 2800's hard disk Installing an expansion card

5 System utilities

Adobe Reader 45 Norton AntiVirus 46 How do I check for viruses? 46 NTI CD&DVD-Maker (for models with CD or DVD Burner)47 PowerDVD (for models with DVD) 48 How do I open and watch a DVD? 48 BIOS utility 49 Reinstalling programs 49 Recovering your system 49 Using backup (Windows XP only) 53 How do I back up files from my hard drive? 53 Disk defragmenter (Windows XP only) 54 How do I defragment my hard drive? 54
7 Frequently asked questions
Frequently asked questions

Appendix A: Notices

ENERGY STAR guidelines compliance FCC notice
Notice: Canadian users Declaration of Conformity for EU countries Modem notices Notice for USA TBR 21 Notice for Australia Important safety instructions Macrovision copyright protection notice Lithium battery statement Laser compliance statement Federal Communications Comission Declaration of Conformity Declaration of Conformity for CE marking
Appendix B: Taking care of your computer 69

Multimedia

Intel high-definition audio Supporting up to 7.1 surround sound, audio CODEC support for 192 KHz quality, multiple streams. 3D-quality audio system via onboard audio controller Audio-in/line-in, audio-out/line-out, headphone-out and microphone-in interfaces

Connectivity

Two PS/2 interfaces for mouse and keyboard One serial port One parallel port One VGA port Eight Universal Serial Bus (USB) 2.0 ports (four on the front; four on the rear panel) High-speed V.92, 56K fax/modem (manufacturing option) Gigabit Ethernet LAN support with remote wake-up function

Front and rear panels

Your computer's front and rear panels consist of the following:

Front panel

No. 7 Icon Component 5.25" drive bay 3.5" drive bay Microphone-in jack (front) Speaker-out/line-out port USB ports Indicators Power button

Rear panel

Your computer's rear panel consists of the following: No. 13 Icon Component Power supply (with full range voltage) Power cord socket PS/2 mouse port PS/2 keyboard port Serial port Parallel/printer port CRT/LCD monitor port USB ports Network port Audio jack Expansion slot Chassis lock pad Hardware reset button
Audio jacks function table
Color/Use Blue Green Pink Orange Black Gray Center & woofer Headphone Line-in Headphone 1.1 CH Line-in Line-out Mic-in 3.1 CH Line-in Front Mic-in 5.1 CH Line-in Front Mic-in Rear Center & woofer 7.1 CH Line-in Front Mic-in Rear Center & woofer Side
Note: See "Connecting peripherals" on page 23 and "Connecting options" on page 27 for more information.

Keyboard

The keyboard has full-sized keys that include separate cursor keys, two Windows keys, four multimedia keys, and 12 function keys. For information on how to connect your keyboard, see "Connecting your mouse and keyboard" on page 23.

No. 9 11

Description Sleep button Multimedia keys Scroll Lock key Cursor keys Windows logo key Function keys

No. 10

Description Internet/Email/Search keys Volume control/mute keys Num Lock key Application key Caps Lock key
Internet/Email/Search keys
Key Web browser Email Search
Description Launches your current default browser. Launches your email application. Opens a search window.

Multimedia keys

Allow you to conveniently play, pause, stop, advance or rewind a song or movie using your keyboard.
Key Backward Play/pause Stop Forward
Description Press to skip backward to the previous track or video file. Press to start playing the audio track or video file. Press again to pause. Press to stop playing the audio track or video file. Press to skip forward to the next track or video file.

Volume control/mute keys

Key Volume up Volume down Mute
Description Press to increase audio volume. Press to decrease audio volume. Toggle sound on/off.

Lock keys

The keyboard has three lock keys which you can toggle on and off to switch between functions.
Lock key Scroll Lock Num Lock
Description When activated, the screen moves one line up or down when you press the up arrow or down arrow, respectively. When activated, the keypad is set to numeric mode, i.e., the keys function as a calculator (complete with arithmetic operators such as +, -, * and /). When activated, all alphabetic characters typed appear in uppercase (same function as pressing Shift + <letter>).

Caps Lock

Note: Scroll Lock may not work with some applications.

Cursor keys

The cursor keys, also called the arrow keys, let you move the cursor around the screen. They serve the same function as the arrow keys on the numeric keypad when the Num Lock is toggled off.

Windows keys

The keyboard has two keys that perform Windows-specific functions.

Key Windows key

Description Pressed alone, this key has the same effect as clicking on the Windows Start button; it launches the Start menu. It can also be used with other keys to provide a variety of functions: < < < < < < > + <Tab> Activates the next Taskbar button. > + <E> > + <F1> > + <F> > + <R> > + <M> Opens the My Computer window. Opens Help and Support. Opens the Find: All Files dialog box. Opens the Run dialog box. Minimizes all windows. > + <M> Undoes the minimize all windows action.

<Shift> + <

Application This key has the same effect as clicking the right mouse button; key it opens the application's context menu.

Function keys

The function keys, F1 - F12, let you perform specific functions, depending on the application that uses them.

Palm rest

The detachable palm rest provides you with a comfortable place to rest your hands while typing.

Optical drive

Your computer may come with a CD-ROM, DVD-ROM, DVD/CD-RW combo, DVD-Dual or DVD-Super multi drive. This drive is located on the front panel of your computer. The CD drive allows you to play different types of compact disks (CDs). The DVD drive allows you to play not only old CD-ROMs, CD-I disks, and video CDs, but digital video disks (DVDs) as well. DVD-ROM is a type of disk media with enough storage space for a full-length movie. The CD-RW, DVDDual and DVD-super multi drive allow you to record or burn recordable and rewritable disks. CDs and DVDs, like diskettes, are also compact, lightweight and easy to carry around. However, they are more delicate than diskettes and must be handled with extra care. To insert a CD or DVD into your computer's CD or DVD drive: 1. Gently push the Eject button located on the front panel.

Important: Make sure that the power cable is properly plugged into an electrical outlet. If you are using a power strip or an AVR (Auto-Voltage Regulator), make sure that it is plugged in and turned on.
Turning off your computer
To turn off your computer, follow the steps below. For Windows XP: On the Windows XP taskbar, click on the Start button, and click Turn Off Computer, then click Turn Off. Turn off all peripherals connected to your computer.
If you cannot shut down your computer normally, press and hold the power button for at least four seconds. Quickly pressing the button may put the computer in suspend mode only.

Connecting options

Connecting your printer
Your computer supports parallel, serial and USB printers. To connect a parallel printer, plug the printer cable into the parallel port (burgundy port) located on the rear panel of your computer.
Note: The printer shown below is for your reference only. Actual device model may vary by country.
Note: If you are using a serial printer, connect the printer cable into the serial port located on the rear panel of your computer. In the same manner, connect a USB printer by plugging the printer cable into any of the USB ports located on the front and rear panels.
Connecting the modem (optional)
Set up your modem connection by plugging the telephone line and handset line your computer. into their corresponding ports on the rear panel of
Connecting to the network
You can connect your computer to a Local Area Network (LAN) using a network cable. To do so, simply plug the network cable into the network port the rear panel of your computer. on
Note: Consult your network system administrator or operating system manual for information on how to configure your network setup.
Connecting multimedia devices
You can connect multimedia devices such as microphones, earphones or headphones, external speakers and audio line-in devices. These devices will let you take advantage of your computer's multimedia features.
Note: The multimedia devices shown below are for reference only. Actual device models may vary in select countries. Plug the devices in as follows: Microphone: Connects to the Microphone-in jacks on the front and rear panels of your computer. (pink jacks) located
Note: For information on how to configure multimedia devices, consult the documentation that came with each device.

Earphones, headphones: Connect to the headphone jack the front panel of your computer.

located on

Note: To adjust the headphone volume, use the volume control buttons on the keyboard. You can also adjust the volume by using the volume icon on the taskbar at the bottom of your screen. External speakers: Connect to the audio-out/line-out jack jack) located on the rear panel of your computer. (lime-green
31 Audio line-in device: Connects to the audio-in/line-in jack jack) located on the rear panel of your computer (light blue

Connecting USB devices

Universal Serial Bus (USB) is a serial bus design capable of cascading peripherals such as a digital camera, keyboard, mouse, joystick, scanner, printer and modem. With USB, complex cable connections can be eliminated. Your computer comes with eight external USB ports: four on the front and four on the rear panel. These ports support USB 2.0 high-performance external devices such as webcams and digital still cameras. They also allow you to connect additional USB devices to your computer without using up its resources.
To connect a USB device, simply plug the device cable into any of the USB ports (black) located on the front and rear panels of your computer.
Note: The USB devices shown below are for reference only. Actual device models may vary by geographic region.
Note: Some USB devices have a built-in USB port which permits you to connect more USB devices.
This chapter contains instructions on how to upgrade your computer, and basic information about your system boards that you will find helpful when performing the upgrade process.

Installation precautions

Before you install any computer component, we recommend that you read the following sections. These sections contain important ESD precautions along with preinstallation and post-installation instructions.

ESD precautions

Electrostatic discharge (ESD) can damage your processor, disk drives, expansion boards, and other components. Always observe the following precautions before you install a computer component: Do not remove a component from its protective packaging until you are ready to install it. Wear a wrist grounding strap and attach it to a metal part of the computer before handling components. If a wrist strap is not available, maintain contact with the computer throughout any procedure requiring ESD protection.
Preinstallation instructions
Always observe the following before you install any component: 5 Turn off your computer and all the peripherals connected to it before opening it. Then unplug all cables from the power outlets. Open your computer according to the instructions on page 35. Follow the ESD precautions described above before handling a computer component. Remove any expansion boards or peripherals that block access to the DIMM sockets or component connectors. See the following sections for specific instructions on the component you wish to install.

Warning! Not turning off the computer properly before you start installing the components may cause serious damage. Do not attempt the procedures described in the following sections unless you are a qualified service technician.
Post-installation instructions
Observe the following after installing a computer component: See to it that the components are installed according to the step-by-step instructions in their respective sections. Replace any expansion boards or peripherals that you removed earlier. Replace the side panels. Connect the necessary cables and turn on your computer.
Opening your Veriton 2800
Caution! Before you proceed, make sure that you have turned off your computer and all peripherals connected to it. Read the "Preinstallation instructions" on page 35. You need to open your computer before you can install additional components. See the following section for instructions:
To remove the computer cover
3 Turn off your computer and unplug all cables. Place your computer on a flat, steady surface. Turn the thumbscrews counterclockwise with your fingers to release the cover. a b Hold the cover with both hands. Slide it back about an inch and then gently lift it upward to detach it.
To replace the computer cover
Align the cover to the housing frame and then push it in to slide it back into place. Secure the cover with the thumbscrews you released earlier.

System boards

Mainboard layout
The mainboard becomes accessible once you open your computer. Refer to the section below for the mainboard layout of your Veriton 2800 computer.
No. Component 13 Two memory slots CPU socket USB connectors PCI connector S/PDIF audio connector 2 serial ATA IDE connectors ATX 12V power connector
No. Component 14 CPU fan connectors Chassis intrusion connector PCI Express x16 connector CD audio connector Hardware reset button connector Front LED connector Clear CMOS jumper Jumper 1-2 normal Jumper 3-4 clear CMOS
Lithium battery Main power connector
Parallel ATA IDE connector

Upgrading your computer

Certain components of your computer are upgradeable, such as the memory, the hard disk, the CPU and the expansion cards. You need to observe the "Installation precautions" on page 35 when installing or removing a computer component. However, for safety purposes, we do not recommend that you perform these upgrades yourself. If you want to replace or upgrade any of these components, contact your dealer or a qualified service technician for assistance.
Note: The mainboard model shown in the following figures may not be exactly the same as the one found in your computer.

Installing additional memory
The two 240-pin sockets on the mainboard support Double Data Rate 2 (DDR2) Synchronous Dynamic Random Access Memory (SDRAM)-type DIMMs. You may install 128 MB, 256 MB, 512 MB or 1 GB DIMMs for a maximum memory capacity of 2 GB. The DDR2 DIMMs require 1.8 volts. You can install PC2 3200/DDR2 400, or PC2 4300/DDRmodules in the DDR2 DIMM sockets. Contact your dealer for qualified DIMM vendors. Each DDR2 DIMM socket is independent from the other. This independence allows you to install DDR2 DIMMs with different capacities to form different configurations.

To remove a DDR2 DIMM

Note: The DDR2 DIMM has only one notch located toward the center of the module. Remove the side panel. Locate the DDR2 DIMM socket on the mainboard.
4 Upgrading your computer Press the holding clips on both sides of the DDR2 DIMM socket outward to release the DDR2 DIMM (a). Gently pull the DDR2 DIMM out of the socket (b).

To install a DDR2 DIMM

Locate the DDR2 DIMM socket on the mainboard. Align the DDR2 DIMM with the socket (a). Press the DDR2 DIMM into the socket until the clips lock onto the DDR2 DIMM (b).
Note: The DDR2 DIMM sockets are slotted to ensure proper installation. If you insert a DDR2 DIMM but it does not fit easily into the socket, turn the DDR2 DIMM around and try to insert it again.
To reconfigure your computer
Your computer automatically detects the amount of memory installed. Run the BIOS utility to view the new value for total system memory and make a note of it.
Replacing the Veriton 2800's hard disk
Follow these steps to replace your computer's hard disk: 5 Remove the computer cover. Detach all cables connected to the optical disk and hard disk. Remove the optical disk and attached hard disk carrier. Remove the screws that hold the hard disk into the carrier. Insert the new hard disk into the carrier and secure it with the screws. Replace the optical disk and hard disk, and reattach all cables to the new hard disk.
Note: Make sure that the other ends of the disk cables are securely connected to their corresponding connectors on the mainboard. Reinstall the metal bracket frame to the housing. Replace the computer cover.
Installing an expansion card

How do I check for viruses?
A Full System Scan scans all files on your computer. To perform a system scan: 1 Start Norton AntiVirus. Double click on the Norton AntiVirus Icon on the desktop or click on the Start menu in the Windows taskbar, highlight Programs, and select Norton AntiVirus. 2 In the Norton AntiVirus main window, click Scan for Viruses.
In the Scan for Viruses panel, click Scan My Computer. Under Actions, click Scan. When the scan is complete, a scan summary appears. Click Finished.
You can schedule customized virus scans that run unattended on specific dates and times or at periodic intervals. If you are using the computer when the scheduled scan begins, it runs in the background so that you do not have to stop working. For more information refer to the Norton AntiVirus Help menu.
NTI CD&DVD-Maker (for models with CD or DVD Burner)
The NTI CD&DVD-Maker is optical disk-recording software that allows you to create and copy audio, data and videos to recordable or rewritable optical disks. To copy an audio or data disk: 3 Click the Quick Burning icon on the desktop. Insert the CD you would like to copy into the source drive and a blank disk into the target drive. Choose the source and target drives from the pull-down lists.
Click the Start button to begin copying.
For more information about NTI CD&DVD-Maker and its other features, refer to the NTl CD&DVD-Maker Help menu.
PowerDVD (for models with DVD)
PowerDVD is a high-quality, pure software DVD player that brings high-quality movies and karaoke to your multimedia PC. You can play back high-resolution DVD titles or MPEG-2 files with MPEG-2 video and Dolby Digital (AC-3) audio. PowerDVD provides a complete set of commands for navigation and advanced features such as multi-angle switching, multi-language and multi-subtitle selection, and parental control. It also has the i-Power Internet Enabling feature, which links to online DVD resources via the Power DVD Desktop Portal Page.
How do I open and watch a DVD?
In most cases, when you insert a DVD into your computer's optical drive, PowerDVD will automatically open a viewer window and the control panel and begin playing.
If PowerDVD does not open automatically: Click the Start button in the taskbar. Highlight All Programs. Click the Cyberlink PowerDVD tab. Select PowerDVD. to begin playback.
When PowerDVD opens, simply press the play button
For more information about Cyberlink PowerDVD and its other features, refer to the PowerDVD Help menu.

BIOS utility

The BIOS utility is a hardware configuration program built into your computer's Basic Input/Output System (BIOS). Since most computers are already properly configured and optimized, there is no need to run this utility. However, if you encounter configuration problems and get the "Run Setup" message, you will need to run this utility.

Note: Before you run BIOS, make sure that you have saved all open files. The computer reboots immediately after you exit Setup. To run the BIOS utility, press the Del key on your keyboard during computer boot up.

Reinstalling programs

If you uninstall one of the preinstalled programs and want to reinstall it, do the following: Make sure that the system is turned on. Insert the System CD into the CD or DVD drive. Select the application that you want to reinstall. Follow all onscreen instructions until you finish the installation.

Recovering your system

If your operating system files are lost or damaged, the recovery process will restore your system's original factory default settings or last system backup. Your Acer Veriton series computer includes a one-button recovery feature that makes restoring your system quick and easy. Acer eRecovery Management works from a hidden partition on your hard drive that contains all the information required to restore your system. There are two modes to recover your system. One is from the system's original settings and another is from system backup.
Warning: Initiating the recovery operation while the operating system is running will result in abnormal shutdown and may make your current OS unstable or unusable.
50 You can also follow the steps below: 1 2
Locate the hardware reset button. See "Front and rear panels" on page 10. Press the button. After a moment, one of the following screens will appear on your display. Please type in your password.
Select "System Recovery."
Select "Factory Default Image."
You should see the following screen:
Caution! Running the recovery operation will erase all files previously saved on your computer so make sure to back up your important files before starting the recovery process.
Note: This feature occupies 2 GB in a hidden partition on your hard drive. 6 If you attempt to restore your system using Acer eRecovery, and the system DOES NOT respond, contact your local vendor or authorised Acer representative immediately.

Using backup (Windows XP only)
The Backup utility creates copies of information on your hard disk. In the event that the original data on your hard disk is erased or overwritten, or becomes inaccessible because of a hard disk malfunction, you can use the copy to restore your lost or damaged data.
How do I back up files from my hard drive?
To run the Backup utility: 5 Click the Start button in the taskbar. Highlight All Programs Click Accessories Select System Tools Click Backup
When Backup starts, follow the onscreen instructions to set up your backup profile and schedule. For more information about Backup, refer to Windows XP help.
Disk defragmenter (Windows XP only)
The disk degfragmentation utility consolidates files and folders on your computer's hard disk. This allows your computer to access files and folders and save new data more efficiently. By consolidating your files and folders, the defragmenter also consolidates the volume's free space, making it less likely that new files will be fragmented.
How do I defragment my hard drive?
To run the Disk Defragmenter: 5 Click the Start button in the taskbar. Highlight All Programs Click Accessories Select System Tools Click Disk Defragmenter
When Disk Defragmenter opens, select a drive/volume and click Analyze. The system will quickly examine the volume and determine whether or not it needs to be defragmented. For more information about Disk Defragmenter, refer to Windows XP help.
This chapter tells you what to do in case your computer is not working properly. However, if a more serious problem arises, contact your dealer or the technical support center (www.acersupport.com) for assistance.
The following questions indicate possible situations that may arise during the use of your computer and each is followed by easy answers and solutions.
I pressed the power switch but the system did not boot up.
Check the LED located above the power switch. If the LED is not lit, no power is being applied to the system. Try the following: Check if the voltage selector switch located on the rear panel of the computer is set to the correct voltage. Check if you properly plugged the power cable into an electrical outlet. If you are using a power strip or AVR, make sure it is plugged in and turned on. Is a nonbootable (nonsystem) diskette in the floppy drive? If yes, remove or replace it with a system diskette and press <Ctrl> + <Alt> + <Del> to restart your computer. The operating system files may be damaged or missing. Insert the startup disk you created during Windows setup into the floppy drive and press <Ctrl> + <Alt> + <Del> to restart your computer. This will automatically diagnose your system and make necessary fixes. However, if the diagnostic utility still reports a problem, then you may have to perform the recovery process to restore your system to its original default factory settings.

Caution: To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA Certified Telecommunication Line Cord.

TBR 21

This equipment has been approved [Council Decision 98/482/EC "TBR 21"] for single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN termination point. In the event of problems, you should contact your equipment supplier in the first instance.

Notice for Australia

For safety reasons, only connect headsets with a telecommunications compliance label. This includes customer equipment previously labelled permitted or certified.
Important safety instructions
Read these instructions carefully. Save them for future reference. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a water-moistened cloth for cleaning. Do not use this product near water. Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged. Slots and openings are provided for ventilation; to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.
If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a b c d When the power cord or plug is damaged or frayed. If liquid has been spilled onto the product. If the product has been exposed to rain or water. If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition. If the product has been dropped or the case has been damaged. If the product exhibits a distinct change in performance, indicating a need for service.

Federal Communications Comission Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The following local manufacturer/importer is responsible for this declaration: Product name: Model: Name of responsible party: Address of responsible party: Personal computer Veriton 2800 Acer America Corporation
2641 Orchard Parkway San Jose, CA 95134 USA
Mr. Young Kim 408-922-2909 408-922-2606
Contact person: Tel: Fax:
Declaration of Conformity for CE marking
Name of manufacturer: Address of manufacturer: Acer Inc. 8F, 88, Sec. 1, Hsin Tai Wu Rd. Hsichih, Taipei Hsien 221 Taiwan, ROC Declares that product: Model: Personal computer Veriton 2800
Conforms to the EMC Directive 89/336/EEC as attested by conformity with the following harmonised standards: EN55022:1994 /A2: 1997: Limits and Methods of Measurement of Radio Interference characteristics of Information Technology Equipment EN55024: 1998/A1: 2001: Information technology equipment Immunity characteristics Limits and methods of measurement including: EN61000-4-2: 1995/A1: 1998/A2: 2001 EN61000-4-3: 1996/A1: 1998 EN61000-4-4: 1995/A2: 2001 EN61000-4-5: 1995/A1: 2001 EN61000-3-2: 2000: Limits for harmonics current emissions EN61000-3-3: 1995/A1: 2001: Limits for voltage fluctuations and flicker in low-voltage supply systems Conforms to the Low Voltage Directive 73/23/EEC as attested by conformity with the following harmonised standard: EN60950: 2000: Safety of Information Technology Equipment Including electrical business equipment. This equipment has been approved to Council Decision 98/482/EC (CTR21) for pan-European single terminal connection to the Public Switched Telephone Network (PSTN). We, Acer Inc., hereby declare that the equipment bearing the trade name and model number specified above was tested conforming to the applicable Rules under the most accurate measurement standards possible, and that all the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the requirements. 08/01/2005 Easy Lai, Director Qualification Center Product Assurance Date EN61000-4-6: 1996/A1: 2001 EN61000-4-8: 1993/A1: 2001 EN61000-4-11: 1994/A1: 2001

Appendix B: Taking care of your computer
Please read the important instructions listed in this section. Following these instructions will help you maximize the durability of your computer.

Important tips

Do not expose the computer to direct sunlight. Do not place it near sources of heat, such as a radiator. Do not expose the computer to temperatures below 0 C (32 F), or above 35 C (95 F). Do not subject the computer to magnetic fields. Do not expose the computer to rain or moisture. Do not spill water on the computer. Do not subject the computer to heavy shock or vibration. Do not expose the computer to dust or dirt. Never place the system on uneven surfaces. Do not step on the power cord or place heavy objects on top of it. Carefully route the power cord and any cables away from foot traffic. When unplugging the power cord, do not pull on the cord itself instead pull on the plug. The total ampere rating of the equipment plugged in should not exceed the ampere rating of the cord if you are using an extension cord. Also, the total current rating of all equipment plugged into a single wall outlet should not exceed the fuse rating. Check the documentation that came with your software programs to see if you can select other combinations of resolution and color. These adjustments could make viewing the screen more comfortable.

Cleaning and servicing

To clean your computer and keyboard
Turn off the computer and unplug the power cord. Use a soft cloth moistened with water and gently wipe the exterior of the computer and the keyboard. Do not use liquid or aerosol cleaners.
To clean your pointing device
To clean a regular mouse (with rubber ball)
3 Open the circular cover underneath the mouse. Take out the rubber ball and wipe it with a soft, water-moistened cloth. Put the ball back and close the cover.
To clean an optical mouse
For users of an optical mouse, refer to the documentation that came with your mouse for maintenance instructions.

To clean your monitor

Make sure that you keep your screen clean. For cleaning instructions, refer to the documentation that came with your monitor.
When to contact a service technician
If you dropped and damaged the computer. If liquid has been spilled onto the computer. If the computer is not operating normally. If a computer problem persists even after you have checked and done the troubleshooting tips discussed in the "Frequently asked questions" on page 57. If your problem is not listed in the "Frequently asked questions" on page 57. If you want to replace or upgrade any of your computer's internal components.