Asrock P4VM800-_, size: 0
ATA-133, Serial ATA-150 (RAID), 0 MB / 2 GB (max), DDR SDRAM, 5.1 surround, 8 x USB
ASRock is an energetic company with the support of strong R&D team and active marketing channels. ASRock's mission is to be an excellent opportunity for customers in the motherboard market who have yearned for a reliable, cost-effective motherboard brand for a long time. With its vision to provide reliable and affordable products, ASRock is confident that it can succeed in the motherboard industry and will continue to grow in other IT industry fields. PRODUCT FEATURES: Supports FSB800MHz... Read more
[ Report abuse or wrong photo | Share your Asrock P4VM800 photo ]
User reviews and opinions
|adb||8:00am on Sunday, August 22nd, 2010|
|I have used this for replacement in two computers that had bad mother boards and it seemed to increase the speed and I have had no complaints about th...|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice. In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice. You may find the latest memory and CPU support lists on ASRock website as well. ASRock website http://www.asrock.com
1.1 Package Contents
ASRock P4VM800 Motherboard (Micro ATX Form Factor: 9.6-in x 8.0-in, 24.4 cm x 20.3 cm) ASRock P4VM800 Quick Installation Guide ASRock P4VM800 Support CD One 80-conductor Ultra ATA 66/100/133 IDE Ribbon Cable One Ribbon Cable for a 3.5-in Floppy Drive One Serial ATA (SATA) Cable One Serial ATA (SATA) HDD Power Cable(Optional) One ASRock I/O PlusTM Shield One COM Port Bracket
Platform: CPU: Micro ATX Form Factor: 9.6-in x 8.0-in, 24.4 cm x 20.3 cm Socket 478, supports Intel Pentium 4 / Celeron (Prescott, Northwood, Willimate) processor Chipsets: North Bridge: VIA P4M800 CE, FSB @ 800/533/400 MHz, with Intel Hyper-Threading Technology ready (see CAUTION 1) South Bridge: VIA VT8237R, supports USB 2.0, ATA 133, SATA 1.5Gb/s Memory: 2 DDR DIMM Slots: DDR1 and DDRDDR DIMM Slot Supports PC3200 (DDR400), Max. 1GB, 2 DDR DIMM Slots Supports PC2700 (DDR333) / PC2100 (DDR266), Max. 2GB IDE: IDE1: ATA 133 / Ultra DMA Mode 6 IDE2: ATA 133 / Ultra DMA Mode 6 Supports up to 4 IDE devices Serial ATA: 2 SATA connectors Support up to 1.5Gb/s data transfer rate Floppy Port: Supports up to 2 floppy disk drives Audio: 5.1 channels AC97 Audio OnBoard VGA: S3 Unichrome Pro 3D/2D Graphics Controller, supports DX7 H / W LAN: Speed: 802.3u (10/100 Ethernet), supports Wake-On-LAN Hardware Monitor: CPU temperature sensing Chassis temperature sensing CPU overheat shutdown to protect CPU life (ASRock U-COP)(see CAUTION 2) CPU fan tachometer Chassis fan tachometer Voltage monitoring: +12V, +5V, +3.3V, Vcore PCI slots: 3 slots with PCI Specification 2.2, PCI3 slot shared with AMR AGP slot: 1 AGP slot, supports 1.5V, 8X/4X AGP card (see CAUTION 3) AMR slot: 1 slot, supports ASRock MR card USB 2.0: 8 USB 2.0 ports: include 6 ready-to-use USB 2.0 ports on the rear panel, plus two on-board headers supporting 2 extra USB 2.0 ports (see CAUTION 4)
ASRock I/O PlusTM: 1 PS/2 mouse port, 1 PS/2 keyboard port, 1 VGA port, 1 parallel port: ECP/EPP support, 6 ready-to-use USB 2.0 ports, 1 RJ 45 port, Audio Jack: Line In / Line Out / Microphone BIOS: AMI BIOS Supports Plug and Play ACPI 1.1 compliance wake up events Supports jumperfree SMBIOS 2.3.1 support CPU frequency stepless control (only for advanced users reference, see CAUTION 5) OS: Microsoft Windows 98SE / ME / 2000 / XP compliant
1. 2. About the setting of Hyper Threading Technology, please check page 24. While CPU overheat is detected, the system will automatically shutdown. Before you resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system. 3. 4. Do NOT use a 3.3V AGP card on the AGP slot of this motherboard! It may cause permanent damage! Power Management for USB 2.0 works fine under Microsoft Windows XP SP1 / 2000 SP4. It may not work properly under Microsoft Windows 98 / ME. Although this motherboard offers stepless control, it is not recommended to perform over-clocking. Frequencies other than the recommended CPU bus frequencies may cause the instability of the system or damage the CPU.
1.3 Motherboard Layout
4 20.3cm (8.0 in)
DDR1 (64/72 bit, 184-pin module)
DDR2 (64/72 bit, 184-pin module)
USB 2.0 T: USB4 B: USB5
Center: Line Out Bottom: Mic In Top: Line In
24.4cm (9.6 in)
VIA P4M800 Chipset
Prescott 800 DDR400
USB 2.0 T: USB0 B: USB1
1 HDLED RESET
PS2_USB_PWR1 Jumper ATX 12V Connector (ATX12V1) CPU Heatsink Retention Module CPU Socket 2 x 184-pin DDR DIMM Slots (DDR1, DDR2; Blue) Infrared Module Header (IR1) Flash Memory ATX Power Connector (ATXPWR1) Floppy Connector (FLOPPY1) Secondary IDE Connector (IDE2, Black) Primary IDE Connector (IDE1, Blue) AGP Slot (1.5V_AGP1) South Bridge Controller Primary Serial ATA Connector (SATA1) Secondary Serial ATA Connector (SATA2)
System Panel Header (PANEL1) Chassis Speaker Header (SPEAKER 1) USB 2.0 Header (USB67, Blue) Serial Port Connector (COM1) AMR Slot (AMR1) Internal Audio Connector: CD1 (Black) Internal Audio Connector: AUX1 (White) 3 x PCI Slots (PCI1- 3) Clear CMOS Jumper (CLRCMOS1) JR1 / JL1 Jumpers Front Panel Audio Header (AUDIO1) Chassis Fan Connector (CHA_FAN1) Shared USB 2.0 Header (USB4_5, Blue) North Bridge Controller CPU Fan Connector (CPU_FAN1)
USB 2.0 T: USB2 B: USB3
1.4 ASRock I/O Plus TM
Parallel Port RJ-45 Port Line In (Light Blue) Line Out (Lime) Microphone (Pink) Shared USB 2.0 Ports (USB45)
USB 2.0 Ports (USB01) USB 2.0 Ports (USB23) VGA Port PS/2 Keyboard Port (Purple) PS/2 Mouse Port (Green)
P4VM800 is a Micro ATX form factor (9.6-in x 8.0-in, 24.4 cm x 20.3 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.
Take note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any component. 2. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. 3. Hold components by the edges and do not touch the ICs. 4. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component.
Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components.
2.1 CPU Installation
Step 1. Step 2. Step 3. Unlock the socket by lifting the lever up to a 90 angle. Position the CPU directly above the socket such that its marked corner matches the base of the socket lever. Carefully insert the CPU into the socket until it fits in place.
The CPU fits only in one correct orientation. DO NOT force the CPU into the socket to avoid bending of the pins.
When the CPU is in place, press it firmly on the socket while you push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked.
CPU Marked Corner Lift Lever Up to 90 Socket Marked Corner
STEP 1: Lift The Socket Lever Up to 90
(SATA1: see p.8, No. 14) (SATA2: see p.8, No. 15)
These two Serial ATA (SATA) connectors support SATA data cables for internal storage devices. The current SATA interface allows up to 1.5 Gb/s data transfer rate. Either end of the SATA data cable can be connected to the SATA hard disk or the SATA connector on the motherboard.
Serial ATA (SATA) Data Cable
Serial ATA (SATA) Power Cable
(Optional) connect to the SATA HDD power connector connect to the power supply
Please connect the black end of SATA power cable to the power connector on the drive. Then connect the white end of SATA power cable to the power connector of the power supply. ASRock I/O PlusTM provides you 6 ready-to-use USB 2.0 ports on the rear panel. If the rear USB ports are not sufficient, this USB 2.0 header is available to support 2 extra USB 2.0 ports. This USB4_5 connector is shared with the USB 2.0 ports 4,5 on ASRock I/O PlusTM. When using the front panel USB ports by attaching the front panel USB cable to this connector (USB4_5), the USB ports 4,5 on ASRock I/O PlusTM will not be able to function. This header supports an optional wireless transmitting and receiving infrared module.
USB 2.0 Header
(9-pin USB67) (see p.8, No. 18)
USB_PWR P-7 P+7 GND DUMMY
GND P+6 P-6 USB_PWR
Shared USB 2.0 Header
(9-pin USB4_5) (see p.8, No. 28)
1 USB_PWR P-5 P+5 GND USB_PWR P-4 P+4 GND DUMMY
Infrared Module Header
(5-pin IR1) (see p.8, No. 6)
IRTX +5V DUMMY
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1) (CD1: see p.8, No. 21) (AUX1: see p.8, No. 22)
CD-R GND GND CD-L
AUX-R GND GND AUX-L
These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, DVD-ROM, TV tuner card, or MPEG card. This is an interface for the front panel audio cable that allows convenient connection and control of audio devices.
Front Panel Audio Header
(9-pin AUDIO1) (see p.8, No. 26)
GND +5VA BACKOUT-R BACKOUT-L
AUD-OUT-L GND AUD-OUT-R MIC-POWER MIC
System Panel Header
(9-pin PANEL1) (see p.8, No. 16)
PLED+ PLEDPWRBTN# GND
This header accommodates several system front panel functions.
DUMMY RESET# GND HDLEDHDLED+
Chassis Speaker Header
(4-pin SPEAKER 1) (see p.8, No. 17)
SPEAKER DUMMY DUMMY +5V
Please connect the chassis speaker to this header.
Chassis Fan Connector
(3-pin CHA_FAN1) (see p.8, No. 27)
CHA_FAN_SPEED +12V GND
Please connect the chassis fan cable to this connector and match the black wire to the ground pin. Please connect the CPU fan cable to this connector and match the black wire to the ground pin. Please connect an ATX power supply to this connector.
CPU Fan Connector
(3-pin CPU_FAN1) (see p.8, No. 30)
CPU_FAN_SPEED +12V GND
ATX Power Connector
(20-pin ATXPWR1) (see p.8, No. 8)
ATX 12V Connector
(4-pin ATX12V1) (see p.8, No. 2)
Please note that it is necessary to connect a power supply with ATX 12V plug to this connector so that it can provides sufficient power. Failing to do so will cause the failure to power up.
Please install the heatsink and the CPU fan before installing ATX 12V connector; otherwise, it may cause permanent damage!
Serial port connector
(9-pin COM1) (see p.8 item 19)
RRXD1 DDTR#1 DDSR#1 CCTS#1
This COM1 connector supports a serial port module.
RRI#1 RRTS#1 GND TTXD1 DDCD#1
AT (SAT 2.7 Serial ATA (SATA) Hard Disks Installation
This motherboard adopts VIA VT8237R southbridge chipset that supports Serial ATA (SATA) hard disks and RAID functions. You may install SATA hard disks on this motherboard for internal storage devices. This section will guide you to install the SATA hard disks. STEP 1: Install the SATA hard disks into the drive bays of your chassis. STEP 2: Connect the SATA power cable to the SATA hard disk. STEP 3: Connect one end of the SATA data cable to the motherboards SATA connector. STEP 4: Connect the other end of the SATA data cable to the SATA hard disk.
Functions SAT 2.8 Hot Plug and Hot Swap Functions for SATA HDDs
P4VM800 motherboard supports Hot Plug and Hot Swap functions for SATA Devices. NOTE What is Hot Plug Function?
If the SATA HDDs are NOT set for RAID configuration, it is called Hot Plug for the action to insert and remove the SATA HDDs while the system is still power-on and in working condition. However, please note that it cannot perform Hot Plug if the OS has been installed into the SATA HDD.
What is Hot Swap Function?
If SATA HDDs are built as RAID1 then it is called Hot Swap for the action to insert and remove the SATA HDDs while the system is still power-on and in working condition.
Installing Windows 2000 / Windows XP With RAID Functions
If you want to install Windows 2000 / Windows XP OS on your SATA HDDs with RAID functions, please follow the below steps. STEP 1: Make a SATA Driver Diskette. A. Insert the ASRock Support CD into your optical drive to boot your system. B. During POST at the beginning of system boot-up, press <F11> key,and then a window for boot devices selection appears. Please select CDROM as the boot device. C. When you see the message on the screen, Do you want to generate Serial ATA driver diskette [YN]?, press <Y>. D. Then you will see these messages, Please insert a diskette into the floppy drive. WARNING! Formatting the floppy diskette will lose ALL data in it! Start to format and copy files [YN]? Please insert a floppy diskette into the floppy drive, and press <Y>. E. The system will start to format the floppy diskette and copy SATA drivers into the floppy diskette. STEP 2: Use SATA RAID BIOS to set RAID configuration. Before you start to configure the RAID function, you need to check the installation guide in the Support CD for proper configuration. Please refer to the document in the Support CD, Guide to SATA Hard Disks Installation and RAID Configuration, which is located in the folder at the following path:. \ SATA RAID BIOS STEP 3: Install Windows 2000 / Windows XP OS on your system. After making a SATA driver diskette and using SATA RAID BIOS to set RAID configuration, you can start to install Windows 2000 / Windows XP on your system. After the installation of Windows 2000 / Windows XP OS, if you want to manage RAID functions, you are allowed to use both SATA RAID BIOS and VIA RAID Tool for RAID configuration. Please refer to the document in the Support CD, Guide to SATA Hard Disks Installation and RAID Configuration, which is located in the folder at the following path:. \ SATA RAID BIOS and the document in the support CD, Guide to VIA RAID Tool, which is located in the folder at the following path:. \ VIA RAID Tool
1. Windows 98 / Windows ME does not support RAID functions. 2. If you want to use VIA RAID Tool in Windows environment, please install SATA drivers from the Support CD again so that VIA RAID Tool will be installed to your system as well.
2.10 Installing Windows 98 / ME / 2000 / XP Without RAID Functions
If you want to install Windows 98 / ME / 2000 / XP on your SATA HDDs without RAID functions or you want to install Windows 98 / ME / 2000 / XP on your IDE HDDs instead of SATA HDDs, please follow the below steps.
If you want to install Windows 98 / Windows ME on your SATA HDDs without RAID functions, you dont have to set up BIOS. Please install Windows 98 / Windows ME OS on your system directly.
STEP 1: Set Up BIOS. (For Wndows 2000 / XP / XP 64-bit.) A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration. B. Set the SATA Operation Mode option from [RAID] to [non-RAID]. STEP 2: Install Windows 98 / ME / 2000 / XP OS on your system. After setting up BIOS, you can start to install Windows 98 / ME / 2000 / XP on your system.
If you dont want to set up RAID functions, there is no need to make a SATA driver diskette.
3. BIOS SETUP UTILITY
This section explains how to use the BIOS SETUP UTILITY to configure your system. The Flash Memory on the motherboard stores the BIOS SETUP UTILITY. You may run the BIOS SETUP UTILITY when you start up the computer. Please press <F2> during the Power-On-Self-Test (POST) to enter the BIOS SETUP UTILITY, otherwise, POST will continue with its test routines. If you wish to enter the BIOS SETUP UTILITY after POST, restart the system by pressing <Ctl> + <Alt> + <Delete>, or by pressing the reset button on the system chassis. You may also restart by turning the system off and then back on.
Because the BIOS software is constantly being updated, the following BIOS setup screens and descriptions are for reference purpose only, and they may not exactly match what you see on your screen.
3.1.1 BIOS Menu Bar
The top of the Main Advanced H/W Monitor Boot screen has a menu bar with the following selections: To set up the system time/date information To set up the advanced BIOS features To display current hardware status To set up the default system device to locate and load the Operating System Security To set up the security features Exit To exit the current screen or the BIOS SETUP UTILITY Use < > key or < > key to choose among the selections on the menu bar, and then press <Enter> to get into the sub screen.
3.1.2 Navigation Keys
Please check the following table for the function description of each navigation key. Navigation Key(s) / / + / <Enter> <F1> <F9> <F10> <ESC> Function Description Moves cursor left or right to select Screens Moves cursor up or down to select items To change option for the selected items To bring up the selected screen To display the General Help Screen To load optimal default values for all the settings To save changes and exit the BIOS SETUP UTILITY To jump to the Exit Screen or exit the current screen
3.2 Main Screen
When you enter the BIOS SETUP UTILITY, the Main screen will appear and display the system overview
BIOS SETUP UTILITY H/W Monitor Boot
System Time System Date BIOS Version Processor Type Processor Speed Cache Size Microcode Update Total Memory DIMM 1 DIMM 2 : : : : : [17:00:09] [Fri 02/25/2005] P4VM800 BIOS P1.00 Intel (R) Pentium (R) 4 CPU 2.40 GHz 2400 MHz 512KB 0F24/1E
Use [Enter], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system Time.
: 256MB with 64MB shared memory : 256MB/166MHz (DDR333) : None
+Tab F1 F9 F10 ESC
Select Screen Select Item Change Field Select Field General Help Load Defaults Save and Exit Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
System Time [Hour:Minute:Second] Use this item to specify the system time. System Date [Day Month/Date/Year] Use this item to specify the system date.
3.3 Advanced Screen
In this section, you may set the configurations for the following items: CPU Configuration, Chipset Configuration, ACPI Configuration, IDE Configuration, PCIPnP Configuration, Floppy Configuration, SuperIO Configuration, and USB Configuration.
WARNING : Setting wrong values in below sections may cause system to malfunction. CPU Configuration Chipset Configuration ACPI Configuration IDE Configuration PCIPnP Configuration Floppy Configuration SuperIO Configuration USB Configuration
Enter F1 F9 F10 ESC
Select Screen Select Item Go to Sub Screen General Help Load Defaults Save and Exit Exit
Setting wrong values in this section may cause the system to malfunction.
3.3.1 CPU Configuration
BIOS SETUP UTILITY Advanced CPU Configuration
CPU Host Frequency Actual Frequency (MHz) Boot Failure Guard Spread Spectrum Ratio Status Ratio Actual Value CPU Thermal Throttling Hyper Threading Technology Max CPUID Value Limit [Auto]  [Enabled] [Auto] : Locked : 16 [Enabled] [Auto] [Disabled] Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit Select how to set the CPU host frequency.
DRAM CAS# Latency Use this item to adjust the means of memory accessing. Configuration options: [Auto], [2.5], , and . DRAM Command Rate The default value of this feature is set to [Auto]. DRAM Voltage The default value of this feature is set to [Auto]. AGP Voltage Use this to select among [Normal] and [High] for AGP Voltage. The default value is [High]. Primary Graphics Adapter This allows you to select [PCI] or [AGP] as the primary graphics adapter. The default vaule is [PCI]. AGP Aperture Size It refers to a section of the PCI memory address range used for graphics memory. It is recommended to leave this field at the default value unless the installed AGP cards specifications requires other sizes. AGP Mode The default value of this feature is set to [Auto]. If you install an 8X-AGP card on this motherboard, you may select [Auto], [8X] or [4X] as the AGP mode. If the installed AGP card is a 4X-AGP card, then you may set the AGP mode as [Auto], [4X], [2X], or [1X]. AGP Fast Write This allows you to enable or disable the feature of AGP fast write protocol support. Onboard AGP Share Memory You may select [Auto], [8MB], [16MB], [32MB], or [64MB] as the Onboard AGP share Memory. The default value of this feature is set to [Auto]. When the total memory is equal or above 256MB, the share memory size will be [64MB]; otherwise, please set the share memory size to [32MB]. PCI Delay Transaction Enable PCI Delay Transaction feature will free the PCI Bus when the CPU is accessing 8-bit ISA cards. Disable this feature when using ISA cards that are not PCI 2.1 compliant. OnBoard LAN This allows you to enable or disable the onboard LAN feature. OnBoard AC97 Audio Select [Auto], [Enabled], or [Disabled] for the onboard AC97 Audio feature. OnBoard MC97 Modem Select [Auto] or [Disabled] for the onboard MC97 Modem feature.
3.3.3 ACPI Configuration
BIOS SETUP UTILITY Advanced ACPI Configuration
Suspend To RAM Restore on AC / Power Loss Ring-In Power On PCI Devices Power On PS / 2 Keyboard Power On RTC Alarm Power On [Disabled] [Power Off] [Disabled] [Disabled] [Disabled] [Disabled] Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit Select auto-detect or disable the STR feature.
Restore on AC/Power Loss Use this item to set the power state after an unexpected AC/power loss. If [Power Off] is selected, the AC/power remains off when the power recovers. If [Power On] is selected, the AC/power resumes and the system starts to boot up when the power recovers. Ring-In Power On Use this item to enable or disable Ring-In signals to turn on the system from the power-soft-off mode. PCI Devices Power On Use this item to enable or disable PCI devices to turn on the system from the power-soft-off mode. PS/2 Keyboard Power On Use this item to enable or disable PS/2 keyboard to turn on the system from the power-soft-off mode. RTC Alarm Power On Use this item to enable or disable RTC (Real Time Clock) to power on the system.
3.3.4 IDE Configuration
BIOS SETUP UTILITY Advanced IDE Configuration
OnBoard IDE Controller SATA Operation Mode Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave SATA1 SATA2 [Both] [RAID] [Hard Disk] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] DISABLED: disables the integrated IDE Controller. PRIMARY: enables only the Primary IDE Controller. SECONDARY: enables only the Secondary IDE Controller. BOTH: enables both IDE Controllers. Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit
OnBoard IDE Controller You may enable either the primary IDE channel or the secondary IDE channel. Or you may enable both the primary and the secondary IDE channels by selecting [Both]. Set to [Disabled] will disable the both. Configuration options: [Disabled], [Primary], [Secondary], [Both]. SATA Operation Mode Use this item to adjust SATA Operation Mode. The default value of this option is [RAID]. If you dont want to operate RAID function on SATA HDDs, please select [non-RAID]. IDE Device Configuration You may set the IDE configuration for the device that you specify. We will use the Primary IDE Master as the example in the following instruction, which can be applied to the configurations of Primary IDE Slave, Secondary IDE Master, and Secondary IDE Slave as well.
BIOS SETUP UTILITY Advanced Primary IDE Master
Device Vendor Size LBA Mode Block Mode PIO Mode Async DMA Ultra DMA S.M.A.R.T. Type LBA/Large Mode Block (Multi-Sector Transfer) PIO Mode DMA Mode S.M.A.R.T. 32Bit Data Transfer :Hard Disk :ST340014A :40.0 GB :Supported :16Sectors :4 :MultiWord DMA-2 :Ultra DMA-5 :Supported [Auto] [Auto] [Auto] [Auto] [Auto] [Disabled] [Disabled]
Select the type of device connected to the system.
TYPE Use this item to configure the type of the IDE device that you specify. Configuration options: [Not Installed], [Auto], [CD/DVD], and [ARMD]. [Not Installed]: Select [Not Installed] to disable the use of IDE device. [Auto]: Select [Auto] to automatically detect the hard disk drive. After selecting the hard disk information into BIOS, use a disk utility, such as FDISK, to partition and format the new IDE hard disk drives. This is necessary so that you can write or read data from the hard disk. Make sure to set the partition of the Primary IDE hard disk drives to active. [CD/DVD]: This is used for IDE CD/DVD drives. [ARMD]: This is used for IDE ARMD (ATAPI Removable Media Device), such as MO. LBA/Large Mode Use this item to select the LBA/Large mode for a hard disk > 512 MB under DOS and Windows; for Netware and UNIX user, select [Disabled] to disable the LBA/Large mode. Block (Multi-Sector Transfer) The default value of this item is [Auto]. If this feature is enabled, it will enhance hard disk performance by reading or writing more data during each transfer. PIO Mode Use this item to set the PIO mode to enhance hard disk performance by optimizing the hard disk timing. DMA Mode DMA capability allows the improved transfer-speed and data-integrity for compatible IDE devices. S.M.A.R.T. Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) feature. Configuration options: [Disabled], [Auto], [Enabled]. 32-Bit Data Transfer Use this item to enable 32-bit access to maximize the IDE hard disk data transfer rate.
3.3.5 PCIPnP Configuration
BIOS SETUP UTILITY Advanced PCI / PnP Configuration
PCI Latency Timer PCI IDE BusMaster  [Enabled] Value in units of PCI clocks for PCI device latency timer register.
PCI Latency Timer The default value is 32. It is recommended to keep the default value unless the installed PCI expansion cards specifications require other settings. PCI IDE BusMaster Use this item to enable or disable the PCI IDE BusMaster feature.
3.3.6 Floppy Configuration
In this section, you may configure the type of your floppy drive.
BIOS SETUP UTILITY Advanced Floppy Configuration
Floppy A Floppy B [1.44 MB 31 2"] [Disabled] Select the type of floppy drive connected to the system.
3.3.7 Super IO Configuration
BIOS SETUP UTILITY Advanced Configure Super IO Chipset
OnBoard Floppy Controller Serial Port Address Infrared Port Address Parallel Port Address Parallel Port Mode EPP Version ECP Mode DMA Channel Parallel Port IRQ [Enabled] [3F8 / IRQ4] [Disabled]  [ECP + EPP] [1.9] [DMA3] [IRQ7] Allow BIOS to Enable or Disable Floppy Controller.
OnBoard Floppy Controller Use this item to enable or disable floppy drive controller. Serial Port Address Use this item to set the address for the onboard serial port or disable it. Configuration options: [Disabled], [3F8 / IRQ4], [2F8 / IRQ3], [3E8 / IRQ4], [2E8 / IRQ3]. Infrared Port Address Use this item to set the address for the onboard infrared port or disable it. Configuration options: [Disabled], [2F8 / IRQ3], and [2E8 / IRQ3]. Parallel Port Address Use this item to set the address for the onboard parallel port or disable it. Configuration options: [Disabled], , and . Parallel Port Mode Use this item to set the operation mode of the parallel port. The default value is [ECP+EPP]. If this option is set to [ECP+EPP], it will show the EPP version in the following item, EPP Version. Configuration options: [Normal], [Bi-Directional], and [ECP+EPP]. EPP Version Use this item to set the EPP version. Configuration options: [1.9] and [1.7]. ECP Mode DMA Channel Use this item to set the ECP mode DMA channel. Configuration options: [DMA0], [DMA1], and [DMA3]. Parallel Port IRQ Use this item to set the IRQ for the parallel port. Configuration options: [IRQ5] and [IRQ7].
BIOS SETUP UTILITY H/W Monitro Boot
Exit system setup after saving the changes.
F10 key can be used for this operation.
Save Changes and Exit When you select this option, it will pop-out the following message, Save configuration changes and exit setup? Select [OK] to save the changes and exit the BIOS SETUP UTILITY. Discard Changes and Exit When you select this option, it will pop-out the following message, Discard changes and exit setup? Select [OK] to exit the BIOS SETUP UTILITY without saving any changes. Discard Changes When you select this option, it will pop-out the following message, Discard changes? Select [OK] to discard all changes. Load Optimal Defaults When you select this option, it will pop-out the following message, Load optimal defaults? Select [OK] to load the default values for all the setup configurations.
Support 4. Software Suppor t
4.1 Install Operating System
This motherboard supports various Microsoft Windows operating systems: 98 SE / ME / 2000 / XP. Because motherboard settings and hardware options vary, use the setup procedures in this chapter for general reference only. Refer to your OS documentation for more information.
4.2 Support CD Information
The Support CD that came with the motherboard contains necessary drivers and useful utilities that enhance the motherboard features.
4.2.1 Running The Support CD
To begin using the support CD, insert the CD into your CD-ROM drive. The CD automatically displays the Main Menu if AUTORUN is enabled in your computer. If the Main Menu did not appear automatically, locate and double click on the file ASSETUP.EXE from the BIN folder in the Support CD to display the menus.
4.2.2 Drivers Menu
The Drivers Menu shows the available devices drivers if the system detects installed devices. Please install the necessary drivers to activate the devices.
4.2.3 Utilities Menu
The Utilities Menu shows the applications software that the motherboard supports. Click on a specific item then follow the installation wizard to install it.
4.2.4 Contact Information
If you need to contact ASRock or want to know more about ASRock, welcome to visit ASRocks website at http://www.asrock.com; or you may contact your dealer for further information.
Technical Reference - Q&A
TSD-QA-44 (July. 21st 2006)
1. Q: I use 775VM800/P4VM800/K7S41GX/K7S41 motherboards. Do these models support 1440x900 resolution? A: If your board is 775VM800, please update BIOS to P1.50 or later version. http://www.asrock.com/support/download.asp?Model=775VM800 If your board is P4VM800, please update BIOS to P1.60 or later version. http://www.asrock.com/support/download.asp?Model=P4VM800 If your board is K7S41GX, Please update BIOS to P2.50 or later and VGA driver to 3.73 or later version. http://www.asrock.com/support/download.asp?Model=K7S41GX http://www.sis.com/download/agreement.php?id=155931 If your board is K7S41, Please update BIOS to P2.30 or later and VGA driver to 3.73 or later version. http://www.asrock.com/support/download.asp?Model=K7S41 http://www.sis.com/download/agreement.php?id=155931 2. Q: Im using a SATA HDD. My computer was running fine. But one day I turn on my computer, it keeps restarting itself after Windows Logo page (at startup). Do you have any idea what possibility causes this?
A: This may be that your system was installed in IDE (or non-RAID) mode. But now it is set to RAID (AHCI) Mode. Please try to set it back to the IDE (non-RAID) mode in the BIOS>Advanced>IDE Configuration. Here are some examples, please refer to the user manual for details. VIA and Nvidia chipset:
Please set SATA Operation Mode to [non-RAID]
Please set Configure SATA as [IDE] 775Twins-HDTV (R2.0) or P4Twins-HDTV
Please set ATA Combination Mode to [Enable] 3. Q: My motherboard is ConRoeXFire-eSATA2. When booting from support CD to make SATA floppy image driver disk, it stop with a message. What should I do? A: 1. When you see the message, please type Ctrl+C , and press y to terminate the program.
2 Then type satafd. Press enter.
3.Insert floppy disk. It will start to generate the SATA floppy disk. Or please download the driver from ASRock Web Site and copy to floppy diskette. http://www.asrock.com/support/download.asp?Model=ConRoeXFire-eSATA2
ASRock is an energetic company with the support of strong R&D team and active marketing channels. ASRock's mission is to be an excellent opportunity for customers in the motherboard market who have yearned for a reliable, cost-effective motherboard brand for a long time. With its vision to provide reliable and affordable products, ASRock is confident that it can succeed in the motherboard industry and will continue to grow in other IT industry fields. PRODUCT FEATURES: Supports FSB800MHz processor, Prescott; Ready and H-T Technology; 2 DDR DIMM slots, Supports DDR400/333/266; Hybrid Booster - ASRock safe overclocking Technology; SerialATA 1.5Gb/s, SATA HDD Hotplug, RAID 0, 1, JBOD; AGP8X, 5.1channel Audio, 10/100 Ethernet LAN; ASRock I/O Plus: 6 ready-to-use USB2.0 ports.
|Form Factor||Micro ATX|
|Compatible Processors||Celeron, Pentium 4|
|Processor Socket||Socket 478|
|Chipset Type||VIA UniChrome P4M800|
|Max Bus Speed||800 MHz|
|Storage Controller||ATA-133, Serial ATA-150 (RAID)|
|Power Connectors||4-pin ATX12V connector, 20-pin main power connector|
|Installed Qty (Max Supported)||0 ( 1 )|
|Supported RAM Technology||DDR SDRAM|
|RAM Installed ( Max )||0 MB / 2 GB (max)|
|Supported RAM Speed||PC2100, PC2700, PC3200|
|Graphics Controller||VIA UniChrome shared video memory (UMA)|
|Audio Output||Sound card|
|Sound Output Mode||5.1 channel surround|
|Compliant Standards||AC '97|
|Telecom / Networking|
|Networking||Network adapter - Ethernet, Fast Ethernet|
|BIOS Features||ACPI support, SMBIOS 2.3.1 support, Hyper-Threading Technology|
|Hardware Monitoring||CPU core temperature, chassis temperature, CPU fan tachometer, chassis fan tachometer, system voltage, CPU overheating protection|
|Sleep / Wake Up||Wake on LAN (WOL)|
|Expansion / Connectivity|
|Expansion Slot(s)||3 PCI 1 AMR 1 AGP 8x ( 1.5 V ) 1 processor - Socket 478 2 memory - DIMM 184-pin|
|Storage Interfaces||Serial ATA-150 - connector(s): 2 x 7pin Serial ATA - RAID 0 / RAID 1 / JBOD ATA-133 - connector(s): 2 x 40pin IDC - 4 device(s)|
|Interfaces||1 x network - Ethernet 10Base-T/100Base-TX - RJ-45 1 x storage - floppy interface - 34 pin IDC 1 x keyboard - generic - 6 pin mini-DIN (PS/2 style) 1 x mouse - generic - 6 pin mini-DIN (PS/2 style) 6 x Hi-Speed USB - 4 pin USB Type A 1 x parallel - IEEE 1284 (EPP/ECP) - 25 pin D-Sub (DB-25) 1 x display / video - VGA - 15 pin HD D-Sub (HD-15) 1 x audio - line-in - mini-phone stereo 3.5 mm 1 x audio - line-out - mini-phone stereo 3.5 mm 1 x audio - input - mini-phone 3.5 mm|
|Additional Connectors (Optional)||2 x Hi-Speed USB|
|Cables Included||1 x Serial ATA cable 1 x floppy cable 1 x IDE cable|
|Software Included||Drivers & utilities|
|Compliant Standards||Plug and Play, ACPI, CE, WHQL, FCC|
|Universal Product Identifiers|
SR-T101 Memory FE1414 DJM-700-K Handytone-486 KDL-46EX710 Raven Controller Specification ZW5000Y8 29PT656A-78R HB812 A-9911 Premier 816 Vga Driver 9120 LR MW108L-S Laserjet 9000 Shotgun Sound Driver Download 25PT4503 LM929 DVD-3000B ESF66030 12070 W LE19A650a1 CMT-A70 CCD-TRV24E Manual CX-simulator R-5G50 Farcry 2 UE32C6540SW VGN-A517B GA-8VM800M Portable Warcraft III WD-12325RD ZIT64X KDL-46EX402 Audio Driver Cibas EOS 300X Slide DI-604UP KD-SX855R GC4444 MT-600 V-CA241NT LVP-X100A VGN-P11z Q FW77kstr MX-12 MS9317E ML-1620 ES-8807 Skype GUH420 GA-P31-ds3L Minor 11 Zoom 507 CMT-EP50 System Elite 3725 PRO 9 LRA-536 Peinture 515 Cyclecomputing Z2 Decepticon MH040fxea2C WL-154 LE37R41B Lexmark C532 Fostex 80 DCR-IP210 14PV405 MP 3500 D-395 Bizhub 161F Hermes ENN26800 RS-M205 Duet II SV-5000W FR-106 Station AM-954 RM-V10A H2000 Kodak M530 14950 A 5000A C4100 BO5010 Nokia 3200 Datatraveler 100 Conroexfire-esata2 AN110B-JD 240V Profil KDC-2019 ER-6N TCL G31X ES-4026 CL-21K40MQ DMC-LX2EGM Motherboard Video Driver
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101