Reviews & Opinions
Independent and trusted. Read before buy Asus TUV4X!

Asus TUV4X

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Asus TUV4X, size: 3.2 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Asus TUV4XASUS TUV4X - motherboard - ATX - Pro133T - Socket 370 - Retail

ATA-100, 0 MB / 1.5 GB (max) - DIMM 168-pin, SDRAM, 4 x USB

The VIA Apollo Pro133T chipset builds on the proven reliability and performance of the market leading VIA Apollo Pro133A to provide a powerful and scalable core logic solution for the new Intel Pentium III, Intel Celeron and VIA C3 processors. Combining support for the full range of Intel Pentium III, Intel Celeron, and VIA C3 processors, the VIA Apollo Pro133T chipset delivers unrivaled flexibility and performance on the Socket 370 platform. With all its integrated features the VIA Apollo Pro13... Read more

 

[ Report abuse or wrong photo | Share your Asus TUV4X photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

JumperFree PC133/VC133 133MHz FSB AGP Pro/4X

Socket 370 Motherboard

USERS MANUAL

USER'S NOTICE

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (ASUS). ASUS PROVIDES THIS MANUAL AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners benefit, without intent to infringe. VIA and Apollo Pro133A are trademarks of VIA Technologies, Inc. Intel, LANDesk, Pentium, and Celeron are trademarks of Intel Corporation. IBM and OS/2 are registered trademarks of International Business Machines. Symbios is a registered trademark of Symbios Logic Corporation. Windows and MS-DOS are registered trademarks of Microsoft Corporation. Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated. Trend and ChipAwayVirus are trademarks of Trend Micro, Inc. The product name and revision number are both printed on the product itself. Manual revisions are released for each product design represented by the digit before and after the period of the manual revision number. Manual updates are represented by the third digit in the manual revision number. For previous or updated manuals, BIOS, drivers, or product release information, contact ASUS at http://www.asus.com.tw or through any of the means indicated on the following page. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Copyright 2001 ASUSTeK COMPUTER INC. All Rights Reserved.
Product Name: ASUS TUV4X Manual Revision: 1.01 E765 Release Date: July 2001

ASUS TUV4X Users Manual

ASUS CONTACT INFORMATION

3.60 Volt

Normal

TUV4X VIO Setting

WARNING! Using a higher voltage may help when overclocking the system but it may shorten the life of system components. As much as possible, keep the VIO jumper to its default setting for better system stability. 5) Clear RTC RAM These two solder points allow you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The RAM data in CMOS, that include system setup information such as system passwords, is powered by the onboard button cell battery. To erase the RTC RAM: (1) unplug the computer, (2) short the solder points, (3) plug and turn ON the computer, (4) hold down the <Del> key during the boot process and enter BIOS setup to re-enter data.
CLRTC TUV4X Clear RTC RAM
Short solder points to Clear CMOS
6) USB Device Wake-up Jumpers (3-pin USBPWR0, USBPWR1) These jumpers allow you to enable or disable the USB wake-up feature on the motherboard. Set these two jumpers to ENABLE if you wish to use the USB devices to wake up the computer. This feature requires an ATX power supply that can supply at least 2A on the +5VSB lead. The default setting for both USBPWR0 and USBPWR1 is DISABLE. NOTES: 1. Before setting either of these jumpers to ENABLE, make sure that you have the appropriate power supply, otherwise the computer does not power up. 2. If you would like to enable the USB wake-up feature, choose ENABLE for both USBPWR0 and USBPWR1 settings. 3. The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal working conditions or in sleep mode.

Disable (Default)

Enable

USB_PWR1

Disable (Default) Enable

TUV4X USB Device Wake Up

3.5 System Memory
This motherboard uses only Dual Inline Memory Modules (DIMMs). Four DIMM sockets are available for 3.3Volt (power level) unbuffered Synchronous Dynamic Random Access Memory (SDRAM) of 16, 32, 64, 128, 256, 512MB, or 1GB densities for a system memory configuration of 32MB up to 1.5GB (no ECC or registered support). One side (with memory chips) of the DIMM takes up one row on the motherboard. This motherboard also supports NECs Virtual Channel SDRAMs and Enhanced Memory Systems High-speed DRAMs. IMPORTANT (see General DIMM Notes below for more) SDRAMs used must be compatible with the current Intel PC133 SDRAM specifications. DO NOT attempt to mix registered SDRAMs with VCM SDRAMs.
DIMM Location Socket 1 (Rows 0&1) Socket 2 (Rows 2&3) Socket 3 (Rows 4&5) Socket 4 (Rows 6&7)

Joystick/Midi (15-pin Female)
NOTE: The functions of the audio connectors Line Out and Line In change when the 4-channel audio feature is enabled (rear line-out switch by audio driver).
Line Out Line In Mic 1/8" Stereo Audio Connectors
7) Audio Connectors (Three 1/8 AUDIO) (optional) The Line Out (lime) connects a headphone or speakers. The Line In (light blue) connects a tape players or other audio sources. The Mic (pink) connects a microphone.
3.8.2 Internal Connectors
1) IDE Activity LED (2-pin IDELED) This connector supplies power to the cabinets IDE activity LED. Read and write activity by devices connected to the Primary or Secondary IDE connectors cause the IDE LED to light up.
IDELED TUV4X IDE Activity LED
TIP: If the case-mounted LED does not light, try reversing the 2-pin plug.
2) Floppy Disk Drive Connector (34-1 pin FLOPPY) This connector supports the provided floppy drive ribbon cable. After connecting the single end to the board, connect the two plugs on the other end to the floppy drives. (Pin 5 is removed to prevent inserting in the wrong orientation when using ribbon cables with pin 5 plugged).
NOTE: Orient the red markings on the floppy ribbon cable to PIN 1
TUV4X Floppy Disk Drive Connector
3) Primary (Blue) / Secondary IDE Connectors (40-1 pin IDE1/IDE2) These connectors support the provided UltraDMA/100/66 IDE hard disk ribbon cable. Connect the cables blue connector to the primary (recommended) or secondary IDE connector, then connect the gray connector to the UltraDMA/100/66 slave device (hard disk drive) and the black connector to the UltraDMA/100/66 master device. It is recommended that non-UltraDMA/100/66 devices be connected to the secondary IDE connector. If you install two hard disks, you must configure the second drive as a slave device by setting its jumper accordingly. Refer to the hard disk documentation for the jumper settings. BIOS supports specific device bootup (see 4.6. Boot Menu). If you have more than two UltraDMA/100/66 devices, purchase another UltraDMA/100/66 cable. NOTES: 1. Pin 20 on each IDE connector is removed to match the covered hole on the UltraDMA cable connector. This prevents incorrect orientation when you connect the cables. 2. The hole near the blue connector on the UltraDMA/100/66 cable is intentional. TIP: You may configure two hard disks to be both Masters with two ribbon cables one for the primary IDE connector and another for the secondary IDE connector. IMPORTANT: For UltraDMA/100/66 IDE devices,use a 40-pin 80-conductor IDE cable. The UltraDMA/66 cable included in the motherboard package also supports UltraDMA/100.

Secondary IDE Connector

Primary IDE Connector
NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1.

TUV4X IDE Connectors

4) Wake-On-LAN Connector (3-pin WOL_CON) This connector connects to a LAN card with a Wake-On-LAN output. The connector powers up the system when a wake up packet or signal is received through the LAN card. IMPORTANT: This feature requires that the Wake-On-LAN or PCI Device parameter is enabled (see 4.5.1 Power Up Control) and that the system has an ATX power supply with at least 720mA +5V standby power.

16) System Power LED Connector(3-1 pin PWR.LED) This 3-1 pin connector connects to the system power LED. The LED lights up when you turn on the system power, and blinks when the system is in sleep, and turns dark in soft-off mode.

Reset Ground

3.9 Starting Up the First Time
1. 2. 3. 4. 5. After making all the connections, replace the system case cover. Be sure that all switches are off (in some systems, marked with ). Connect the power cord to the power connector at the back of the system chassis. Connect the power cord to a power outlet that is equipped with a surge protector. Turn on the devices in the following order: a. Monitor b. External SCSI devices (starting with the last device on the chain) c. System power (For ATX power supplies, you need to switch on the power supply as well as press the ATX power switch on the front of the chassis.) 6. The power LED on the front panel of the system case lights up. For ATX power supplies, the system LED lights up when you press the ATX power switch. If the monitor complies with green standards or if it has a power standby feature,the monitor LED may light up or switch between orange and green after the system LED does. The system then runs the power-on tests. While the tests are running, the BIOS beeps or additional messages appear on the screen. If you do not see anything within 30 seconds from the time you turn on the power, the system may have failed a power-on test. Check the jumper settings and connections or call your retailer for assistance.
3. H/W SETUP 3. H/W SETUP Connectors Powering Up

Award BIOS Beep Codes

Beep One short beep when displaying logo Long beeps in an endless loop One long beep followed by three short beeps High frequency beeps when system is working Meaning No error during POST No DRAM installed or detected Video card not found or video card memory bad CPU overheated System running at a lower frequency
7. At power on, hold down <Delete> to enter BIOS Setup. Follow the instructions in 4. BIOS SETUP. * Powering Off the computer: You must first exit or shut down the system before switching off the power switch. For ATX power supplies, you can press the ATX power switch after exiting or shutting down the operating system. If you use Windows 9X, click the Start button, click Shut Down, then click Shut down the computer? The power supply should turn off after Windows shuts down. NOTE: The message You can now safely turn off your computer does not appear when shutting down with ATX power supplies. ASUS TUV4X Users Manual

8. Follow the onscreen instructions to continue.
WARNING! If you encounter problems while updating the new BIOS, DO NOT turn off the system because this may cause boot problems. Just repeat the process, and if the problem still persists, load the original BIOS file you saved to the boot disk. If the Flash Memory Writer utility is not able to successfully update a complete BIOS file, the system may not boot. If this happens, call the ASUS service center for support. 48 ASUS TUV4X Users Manual

4.2 BIOS Setup Program

This motherboard supports a programmable EEPROM that you can update using the provided utility described in 4.1 Managing and Updating Your BIOS. The utility is used if you are installing a motherboard, reconfiguring your system, or prompted to Run Setup. This section describes how to configure your system using this utility. Even if you are not prompted to use the Setup program, at some time in the future you may want to change the configuration of your computer. For example, you may want to enable the Security Password Feature or make changes to the power management settings. It will then be necessary to reconfigure your system using the BIOS Setup program so that the computer can recognize these changes and record them in the CMOS RAM of the EEPROM. The EEPROM on the motherboard stores the Setup utility. When you start up the computer, the system provides you with the opportunity to run this program. This appears during the Power-On Self Test (POST). Press <Delete> to call up the Setup utility. If you are a little bit late in pressing the mentioned key, POST will continue with its test routines, thus preventing you from calling up Setup. If you still need to call Setup, restart the system by pressing <Ctrl> + <Alt> + <Delete>, or by pressing the Reset button on the system chassis. You can also restart by turning the system off and then back on again. But do so only if the first two methods fail. The Setup program has been designed to make it as easy to use as possible. It is a menu-driven program, which means you can scroll through the various sub-menus and make your selections among the predetermined choices. To access the BIOS Setup program, press the <Delete> key after the computer has run through its POST. NOTE: Because the BIOS software is constantly being updated, the following BIOS setup screens and descriptions are for reference purposes only, and may not exactly match what you see on your screen.

Sub-Menu

Note that a right pointer symbol (as shown in the left view) appears to the left of certain fields. This pointer indicates that you can display a sub-menu from this field. A sub-menu contains additional options for a field parameter. To display a sub-menu, move the highlight to the field and press <Enter>. The sub-menu appears. Use the legend keys to enter values and move from field to field within a sub-menu as you would within a menu. Use the <Esc> key to return to the main menu. Take some time to familiarize yourself with the legend keys and their corresponding functions. Practice navigating through the various menus and sub-menus. If you accidentally make unwanted changes to any of the fields, use the set default hot key <F5> to load the Setup default values. While moving around through the Setup program, note that explanations appear in the Item Specific Help window located to the right of each menu. This window displays the help text for the currently highlighted field. NOTE: The item heading in square brackets represents the default setting for that field.

4.3 Main Menu

When you enter the Setup program, the following screen appears:
System Time [XX:XX:XX] Sets the system to the time that you specify (usually the current time). The format is hour, minute, second. Valid values for hour, minute and second are Hour: (00 to 23), Minute: (00 to 59), Second: (00 to 59). Use the <Tab> or <Shift> + <Tab> keys to move between the hour, minute, and second fields. System Date [XX/XX/XXXX] Sets the system to the date that you specify (usually the current date). The format is month, day, year. Valid values for month, day, and year are Month: (1 to 12), Day: (1 to 31), Year: (100 year range). Use the <Tab> or <Shift> + <Tab> keys to move between the month, day, and year fields. Legacy Diskette A [1.44M, 3.5 in.], Legacy Diskette B [None] Sets the type of floppy drives installed. Configuration options: [None] [360K, 5.25 in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.] [2.88M, 3.5 in.] Floppy 3 Mode Support [Disabled] This is required to support older Japanese floppy drives. The Floppy 3 Mode feature allows reading and writing of 1.2MB (as opposed to 1.44MB) on a 3.5-inch diskette. Configuration options: [Disabled] [Enabled]

4. BIOS SETUP Main Menu

4.3.1 Primary & Secondary Master/Slave

4. BIOS SETUP Chip Configuration
SDRAM Active to Precharge Time To make changes to this field, set the SDRAM Configuration field to [User Defined]. Read Around Write [Enabled] Setting this field to [Enabled] allows the memory controller to store write data in its buffer whenever the CPU issues a write command. The next time the CPU needs the data, it retrieves the data from the memory buffer without accessing the SDRAM. Configuration options: [Disabled] [Enabled] CPU-DRAM Back-Back Transaction [Enabled] Configuration options: [Enabled] [Disabled] Delayed Transaction [Disabled] When set to [Enabled], this feature frees the PCI bus when the CPU is accessing 8-bit ISA cards. This process normally consumes about 50-60 PCI Clocks without PCI delayed transaction. Set this field to [Disabled] when using ISA cards that are not PCI 2.1 compliant. Configuration options: [Enabled] [Disabled] PCI to DRAM Prefetch [Disabled] Configuration options: [Disabled] [Enabled] Byte Merge [Disabled] To optimize the data transfer on PCI, this feature combines a sequence of individual memory writes (bytes or words) into a single 32-bit block of data. However, byte merging may only be done when the bytes within a data phase are in a prefetchable address range. Configuration options: [Disabled] [Enabled] DRAM Read Latch Delay [1.5 ns] Configuration options: [0.0 ns] [0.5 ns] [1.0 ns] [1.5 ns] AGP Capability [4X Mode] This motherboard supports the AGP 4x interface that transfers video data at 1066MB/s. AGP 4x is backward-compatible, so you may leave the default [4X Mode] on even if you are using an AGP 1x or 2x video card. When set to [1X Mode], the AGP interface only provides a peak data throughput of 266MB/s even if you are using an AGP 2x/4x card. When set to [2X Mode], the AGP interface only provides a peak data throughput of 533MB/s even if you are using an AGP 4x card. Configuration options: [1X Mode] [2X Mode] [4X Mode]
Graphics Aperture Size [32MB] This feature allows you to select the size of mapped memory for AGP graphic data. Configuration options: [4MB] [8MB] [16MB] [32MB] [64MB] [128MB] [256MB] Video Memory Cache Mode [UC] USWC (uncacheable, speculative write combining) is a new cache technology for the video memory of the processor. It can greatly improve the display speed by caching the display data. You must set this to UC (uncacheable) if your display card does not support this feature, otherwise the system may not boot. Configuration options: [UC] [USWC] Onboard PCI IDE Enable [Both] This field allows you to enable either the primary IDE channel or secondary IDE channel, or both. You can also set both channels to [Disabled]. Configuration options: [Both] [Primary] [Secondary] [Disabled] Onboard PCI Audio Enable [Enabled] This field allows you enable or disable the onboard audio controller. Configuration options: [Disabled] [Enabled] Memory Hole At 15M-16M [Disabled] This field allows you to reserve an address space for ISA expansion cards. Setting the address space to a particular setting makes that memory space unavailable to other system components. Expansion cards can only access memory up to 16MB. Configuration options: [Disabled] [Enabled]

4.4.2 I/O Device Configuration
Onboard FDC Swap A & B [No Swap] This field allows you to reverse the hardware drive letter assignments of your floppy disk drives. Configuration options: [No Swap] [Swap AB]
UART2 Use Infrared [Disabled] When enabled, this field activates the onboard standard infrared feature and sets the second serial UART to support the infrared module connector on the motherboard. If the system already has a second serial port connected to the onboard COM2 connector, it will no longer work if you enable the infrared feature. See Standard Infrared Module Connector in 3.8 Connectors. Configuration options: [Disabled] [Enabled] Onboard Parallel Port [378H/IRQ7] This field sets the address of the onboard parallel port connector. If you disable this field, the Parallel Port Mode and ECP DMA Select configurations are not available. Configuration options: [Disabled] [378H/IRQ7] [278H/IRQ5]
4. BIOS SETUP I/O Device Config
Onboard Serial Port 1 [3F8H/IRQ4] Onboard Serial Port 2 [2F8H/IRQ3] These fields allow you to set the addresses for the onboard serial connectors. Serial Port 1 and Serial Port 2 must have different addresses. Configuration options: [3F8H/IRQ4] [2F8H/IRQ3] [3E8H/IRQ4] [2E8H/IRQ10] [Disabled]
Parallel Port Mode [ECP+EPP] This field allows you to set the operation mode of the parallel port. [Normal] allows normal-speed operation but in one direction only; [EPP] allows bidirectional parallel port operation; [ECP] allows the parallel port to operate in bidirectional DMA mode; [ECP+EPP] allows normal speed operation in a two-way mode. Configuration options: [Normal] [EPP] [ECP] [ECP+EPP] ECP DMA Select [3] This field allows you to configure the parallel port DMA channel for the selected ECP mode. This selection is available only if you select [ECP] or [ECP+EPP] in Parallel Port Mode above. Configuration options: [1] [3] [Disabled]
Onboard Peripheral Resource Control
Onboard AC97 Modem Controller [Auto] Onboard AC97 Audio Controller [Auto] The setting [Auto] allows BIOS to detect whether you installed a modem or audio device. If BIOS detects a modem/audio device, it automatically enables the onboard modem/audio controller, otherwise, it disables the onboard modem/audio controller. If any conflicts occur, set these fields to [Disabled]. Configuration options: [Disabled] [Auto] 66 ASUS TUV4X Users Manual

4.4.3 PCI Configuration

PCI/VGA Palette Snoop [Disabled] Some non-standard VGA cards, such as graphics accelerators or MPEG video cards, may not show colors properly. Setting this field to [Enabled] corrects this problem. If you are using standard VGA cards, leave this field to the default setting [Disabled]. Configuration options: [Disabled] [Enabled] PCI Latency Timer [32] Leave this field to the default setting [32] for best performance and stability. SYMBIOS SCSI BIOS [Auto] [Auto] allows the BIOS to detect whether you have a SYMBIOS SCSI card. If such card is detected, the SCSI BIOS is enabled. Otherwise, the onboard SCSI BIOS is disabled. The setting [Disabled] disables the onboard SYMBIOS SCSI BIOS so that the BIOS on an add-on Symbios SCSI card can be used. If the SYMBIOS SCSI card does not have a BIOS, the Symbios SCSI card will not work. Configuration options: [Auto] [Disabled]

4.5 Power Menu

The Power menu allows you to reduce power consumption. This feature turns off the video display and shuts down the hard disk after a period of inactivity.
This field acts as the master control for the power management modes. [Max Saving] puts the system into power saving mode after a brief period of system inactivity. [Min Saving] is almost the same as [Max Saving] except that the system inactivity period is longer. [Disabled] deactivates the power saving features, [User Defined] allows you to set power saving options according to your preference. Configuration options: [User Define] [Disabled] [Min Saving] [Max Saving] IMPORTANT: You should install the Advanced Power Management (APM) utility to keep the system time updated even when the computer enters suspend mode. In DOS environment, you need to add the statement, DEVICE=C:\DOS\POWER.EXE, to the CONFIG.SYS file. In Windows 3.x and Windows 95, you need to install Windows with the APM feature. In Windows 98 or later, APM is automatically installed as indicated by a battery and power cord icon labeled Power Management in the Control Panel. Select the item Advanced in the Power Management Properties dialog box. ASUS TUV4X Users Manual 71

4. BIOS SETUP Power Menu

Power Management [User Defined] This field must be enabled to activate the automatic power saving features. When set to [Disabled], the power management features do not function regardless of the other settings on this menu. The [User Defined] option allows you to make your own selections in the Power menu. When set to [Max Saving], system power conserved to its greatest amount. The Suspend Mode field is then be set to a predefined value that ensures maximum power savings.
Video Off Option [Suspend -> Off ] This field determines when to activate the video off feature for monitor power management. Configuration options: [Always On] [Suspend -> Off] Video Off Method [DPMS OFF] This field defines the video off features. The DPMS (Display Power Management System) feature allows the BIOS to control the video display card if it supports the DPMS feature. [Blank Screen] only blanks the screen (use this for monitors without power management or green features. If set up in your system, your screen saver will not display with [Blank Screen] selected). [V/H SYNC+Blank] blanks the screen and turns off vertical and horizontal scanning. Configuration options: [Blank Screen] [V/H SYNC+Blank] [DPMS Standby] [DPMS Suspend] [DPMS OFF] [DPMS Reduce ON] HDD Power Down [Disabled] Shuts down any IDE hard disk drives in the system after a period of inactivity as set in this user-configurable field. This feature does not affect SCSI hard drives. Configuration options: [Disabled] [1 Min] [2 Min] [3 Min].[15 Min] Suspend-to-RAM [Disabled] This field lets you enable or disable the Suspend-to-RAM (STR) feature allowing the system to go into suspend mode after the time specified in the Suspend Mode parameter. The STR feature does not work if you installed a DIMM on DIMM4 socket. In such case, this parameter does not appear in the menu. Configuration options: [Disabled] [Enabled] Suspend Mode [Disabled] Sets the time period before the system goes into suspend mode. Configuration options: [Disabled] [30 Sec] [1 Min] [2 Min].[1 Hour] PWR Button < 4 Secs [Soft Off] When set to [Soft off], the ATX switch can be used as a normal system power-off button when pressed for less than 4 seconds. [Suspend] allows the button to have a dual function where pressing less than 4 seconds will place the system in sleep mode. Regardless of the setting, holding the ATX switch for more than 4 seconds will power off the system. Configuration options: [Soft off] [Suspend]

4. BIOS SETUP NOTES

80 ASUS TUV4X Users Manual

5. SOFTWARE SETUP

5.1 Operating Systems
You should always use the latest operating system and updates when using new hardware to ensure full compliance. You may use any version of Windows 98/2000/ Millenium, but for Windows 95, you must use OSR 2.0 or later. For Windows NT 4.0, you must use Service Pack 3.0 or later.
5.1.1 Windows 98 First Time Installation
When you start Windows for the first time after the installation of the motherboard, Windows 98 detects the onboard audio and video chips and may attempt to install a driver from its system registry. When prompted to restart, select No and then follow the normal setup procedures on the screen.
5.2 TUV4X Motherboard Support CD
To begin using the support CD, insert it into the CD-ROM drive. The support installation menu should appear. If the menu does not appear, double-click or run D:\ASSETUP.EXE (assuming that your CD-ROM drive is drive D). NOTE: The support CD contents are subject to change at any time without notice.

5.2.1 Installation Menus

5. S/W SETUP OS / Support CD Applications

5.2.2 Applications

VIA 4 in 1 Drivers Vx.xx: This driver will automatically detect and install the latest IDE Bus Master, VIA AGP Driver, IRQ Routing Driver, and the VIA INF Driver. VIA Bus Master PCI IDE Driver : Installs the VIA Bus Master PCI IDE Driver. C-Media PCI Audio Driver and Application: Installs drivers and software applications for the multi-channel PC sound system to support the C-Media Audio Chip and HRTF 3D Audio circuitry. Intel LDCM Administrator Setup: Installs software to monitor PC systems on the network within the same bridge address with the Client software installed. The administrator should install both Administrator and Client software. Intel LDCM Client Setup: Installs software to monitor the Client system. The LANDesk Client Manager must be installed to use the hardware manager features. ASUS BIOS Flash Utility for LDCM: Installs a utility that can remotely flash a client PCs BIOS when used in conjunction with Intel LDCM Administrator. ASUS PC Probe Vx.xx: Installs a utility to monitor your computers fan, temperature, and voltages. ASUS Update Vx.xx: Installs a program to help you update your BIOS or download a BIOS image file.
5. S/W SETUP Applications
Microsoft DirectX Driver: Installs Microsoft DirectX driver. PC-cillin 2000 Vx.xx: Installs the PC-cillin virus protection software. View the online help for more information. Adobe Acrobat Reader Vx.x: Installs the Adobe Acrobat Reader software necessary to view users manuals saved in PDF format. Updated or other language versions of this motherboard's manual is available in PDF format at any of our web sites. Cyberlink Video and Audio Applications: Installs Cyberlink PowerPlayer SE and VideoLive Mail. ASUS Screen Saver: Installs the ASUS Screen Saver application. Show Mainboard Information: Allows you to view information about your motherboard, such as product name, BIOS version, and CPU. Browse Support CD: Allows you to view the contents of the CD. ReadMe: Allows you to view the support CD file list and contact information. Exit: Exits the CD installation menu.

NOTES 5. SOFTWARE SETUP

84 ASUS TUV4X Users Manual

6. SOFTWARE REFERENCE

ASUS PC Probe is a convenient utility to continuously monitor your computer systems vital components, such as fan rotations, voltages, and temperatures. It also has a utility that lets you review useful information about your computer, such as hard disk space, memory usage, and CPU type, CPU speed, and internal/external frequencies through the DMI Explorer.
6.1.1 Starting ASUS PC Probe
When ASUS PC Probe starts, a splash screen appears allowing you to select whether to show the screen again when you open PC Probe or not. To bypass this startup screen, clear the Show up in next execution check box.
To open ASUS PC Probe, click the Windows Start button, point to Programs, and then ASUS Utility, and then click Probe Vx.xx.
The PC Probe icon appears on the taskbar system tray indicating that ASUS PC Probe is running. Clicking the icon allows you to see the status of your PC.
6. S/W REFERENCE ASUS PC Probe

6.1 ASUS PC Probe

6.1.2 Using ASUS PC Probe

Monitoring

Monitor Summary Shows a summary of the items being monitored.
Temperature Monitor Shows the PC temperature (for supported processors only).
Temperature Warning threshold adjustment (Move the slider up to increase the threshold level or down to decrease the threshold level)
Fan Monitor Shows the PC fan rotation.
Fan Warning threshold adjustment (Move the slider up to increase the threshold level or down to decrease the threshold level)
Voltage Monitor Shows the PC voltages.
87 Settings Lets you set threshold levels and polling intervals or refresh times of the PCs temperature, fan rotation, and voltages.
Lets you select when to enable software CPU cooling. When When CPU Overheated is selected, the CPU cooling system is enabled whenever the CPU temperature reaches the threshold value.

CPU Cooling System Setup

History Lets you record the monitoring activity of a certain component of your PC for future reference.

Fan Control Lets you enable/disable Smart Fan Control. Smart Fan Control adjusts the fan speed automatically based on the current CPU temperature and predefined threshold.

Information

Hard Drives Shows the used and free space of the PCs hard disk drives and the file allocation table or file system used.
Memory Shows the PC memory load, memory usage, and paging file usage.
Device Summary Shows a summary of devices present in your PC.
DMI Explorer Shows information pertinent to the PC, such as CPU type, CPU speed, and internal/external frequencies, and memory size.

Utility

Lets you run programs outside of the ASUS Probe modules. To run a program, click Execute Program. NOTE: This feature is currently unavailable.
6.1.3 ASUS PC Probe Task Bar Icon
Right clicking the PC Probe icon brings up a menu to open or exit ASUS PC Probe and pause or resume all system monitoring.
When the ASUS PC Probe senses a problem with your PC, portions of the ASUS PC Probe icon changes to red, the PC speaker beeps, and the ASUS PC Probe monitor appears.
6. SOFTWARE REFERENCE NOTES
90 ASUS TUV4X Users Manual
Accelerated Graphics Port 8 AGP Capability 63 AGP Pro Slot 29, 30 AGP. See Accelerated Graphics Port ASUS PC Probe 85 Starting 85 Task Bar Icon 89 Using 85, 86 ATAPI CD-ROM 76 ATX Power Supply Connector 41 Automatic Power Up 74 Serial Number 59 Speed 58 Upgrade/Reinstallation 60 ZIF Socket 25 Chassis Intrusion 38 Chip Configuration 62 Connectors ATX Power Supply 41 Audio 33 Chassis Fan 37 CPU Fan 37 External 31 Floppy Disk Drive 34, 41, 42 Game/MIDI 33 IDE 35 Infrared Module 39 Internal 34 Internal Audio 41, 42 Panel 43 Parallel Port 32 Power Supply Thermal Sensor 43 PS/2 Keyboard 31 PS/2 Mouse 31 Serial Port 32 SMBus 38, 39 USB 32 Wake-On-LAN 36 Wake-On-Ring 36 CPU. See Central Processing Unit
BIOS Advanced Menu 58 Beep Codes 44 Boot Menu 76 Boot Sequence 76 Exit Menu 78 Language 57 Legend Bar 50 Main Menu 52 Menu Bar 50 Power Menu 71 Setup Defaults, loading 79 Setup Program 49 Smart BIOS 9 Sub-menu launching 51 Updating 45 Boot Device Selection 76 Boot Up NumLock Status 56 Boot Virus Detection 77

 

Technical specifications

Full description

The VIA Apollo Pro133T chipset builds on the proven reliability and performance of the market leading VIA Apollo Pro133A to provide a powerful and scalable core logic solution for the new Intel Pentium III, Intel Celeron and VIA C3 processors. Combining support for the full range of Intel Pentium III, Intel Celeron, and VIA C3 processors, the VIA Apollo Pro133T chipset delivers unrivaled flexibility and performance on the Socket 370 platform. With all its integrated features the VIA Apollo Pro133T provides a highly scalable solution for running a wide choice of PC, workstation, and server applications. This chipset will give OEMs and System Integrators the full flexibility in configuring systems to meet a full range of price points. The VIA Apollo Pro133Tchipset is based on an innovative and scaleable architecture with proven reliability and performance - it is a two-chip set consisting of the VT82C694T North Bridge Controller and the VT82C596B South Bridge Controller. Additional key features include support four USB ports, AC'97 link for audio and modem, hardware monitoring, and power management.

General
Product TypeMotherboard
Form FactorATX
Width8 in
Depth12 in
Compatible ProcessorsCeleron, Pentium III
Processor SocketSocket 370
Chipset TypeVIA Apollo Pro133T
Max Bus Speed133 MHz
BIOS TypeAward
Storage ControllerATA-100
Processor
TypeIntel plug-in module
Installed Qty (Max Supported)0 ( 1 )
Memory
Supported RAM TechnologySDRAM
Supported RAM Integrity CheckParity, ECC
RAM Installed ( Max )0 MB / 1.5 GB (max) - DIMM 168-pin
RAM TechnologySDRAM - ECC - 133 MHz
Expansion / Connectivity
Expansion Slot(s)1 ( 1 ) x processor - Socket 370 3 ( 3 ) x memory - DIMM 168-pin 5 ( 5 ) x PCI 1 ( 1 ) x AGP Pro 1 ( 1 ) x shared PCI / AMR
Storage InterfacesATA-66 - connector(s): 2 x 40pin IDC
Interfaces1 x parallel - IEEE 1284 (EPP/ECP) - 25 pin D-Sub (DB-25) 2 x serial - RS-232C - 9 pin D-Sub (DB-9) 1 x mouse - generic - 6 pin mini-DIN (PS/2 style) 1 x keyboard - generic - 6 pin mini-DIN (PS/2 style) 1 x storage - floppy interface - 34 pin IDC 4 x USB - 4 pin USB Type A
Miscellaneous
Compliant StandardsPlug and Play
Package TypeRetail
Universal Product Identifiers
BrandASUSTeK COMPUTER
Part NumberTUV4X

 

Tags

STR-DE515 VR 5000 500 E FO-730 Proel M-16 32LG2000 AEK 100 NAT PW1350 650 RE Bass500 640-2 1 0 DX1000 STR-D450Z TT1610 TX-32PM11P Photo SRX 280 Deluxe 1911 F Bios R-1000 1984 90121 V-studio 100 T940T Officejet 5110 Companion 40 IB Xtreme 6050 Satellite 4100 Video Link 14PT1686 58S WCF54G 18-25 Manual 220-240V Dimage E223 DEH-P4050UB HT-X810R Galaxy 29PT5458 Presario 5000 HD9140 REV500 Digital FC9071 D-560 Zoom MDS-JE700 GSA-4163B GR-389R XT1500-ID Multipass C555 PHP PHP Dual II LX-1050 Teddy 10 5 Automoton BCO110 P3005D 170MP-TFT PSR-500M GEX-P5750TVP Vapeur VS-2400CD CS-E9dkew KX-TS550 - 70 MDX 2100 NV-GS50EG PSS 31 KDC-8090R Eheim 3581 Versatis 620 V2 2 Voice SGH-I300 Drakkar LQ-680 PRO JR HQ282 Touring AG-7350E LV4987 Original 32PW8718 RCD-M33 DVD-P380 Az1316-37B HK6500 DCR-TRV50E FR752-00 XZ400 HTS6100 Vorwerk TM21 Audiogram3 XS-L1236 Deville 1997 Prosonic PV-DC252D AVR-4800 Messenger

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101