Reviews & Opinions
Independent and trusted. Read before buy Fujitsu S2020!

Fujitsu S2020

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Fujitsu S2020, size: 3.4 MB
Related manuals
Fujitsu S2020 Software Guide

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Fujitsu S2020Fujitsu MCF-307AM05 CPU Cooling Fan :: Lifebook S2020
Fujitsu LifeBook S6130 Cooling Fan DC5V 310mA MCF-307AM05 Wire Length: 42mm - (3-wire)3-pin connector

Details
Brand: Fujitsu
Part Number: MCF-307AM05


Here you can find all about Fujitsu S2020, for example drivers and specs. You can also write a review.

 

[ Report abuse or wrong photo | Share your Fujitsu S2020 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 1. Page 1 of 1. Average Rating:
Jayburn 3:03am on Sunday, April 25th, 2010 
I had bought a Fujitsu S 2020 Laptop , after 1 month of purchase it started giving me the problems like low battery back up , keys not working .

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

LifeBook S2020
Value-priced ultra-portable at less than 2kg Optimal wireless performance with Super G8 802.11b/g9 with Dual Antenna Superior security features for enhanced data and hardware protection
S2020 Recommended Configurations Mobile AMD Athlon XP-M 2200+ (Low Voltage), QuantiSpeed architecture with 3DNow! Professional and AMD PowerNow! Technology Microsoft Windows XP Home Edition Microsoft Windows XP Professional Edition 13.3" XGA TFT, 1024 x 768 pixels DVD/CD-RW Combo Drive Super G8 wireless network connection No wireless module 802.11b/g9 with Dual Antenna Upgradeable to Super G8 wireless network connection 802.11b/g9 with Dual Antenna 256MB DDR266 40GB Up to 2.7hrs1 (6-cell Li-Ion 4000mAh) Approx. 1.75kg (w/ Weight Saver Option) Specifications ATI RADEON IGP320M + ALi M1535+ 512KB 1024MB DDR266 Ultra DMA/100 and S.M.A.R.T support ATI RADEON IGP320M, selectable 16/32/64/128MB shared memory5 with 3D accelerator SigmaTel STAC9767 AC97 codec with built-in dual Stereo Speakers 56K V.922 modem, IrDA 1.1 4Mbps4, 100/10Mbps3 Fast Ethernet and Super G8 wireless network connection 802.11b/g9 with Dual Antenna. Separate ON/OFF switch for wireless network connection. Keyboard: 82-key, 19mm key pitch, 3mm key stroke Touch Pad with Scroll Buttons PC Card Type I/II x 1, Smart Card support6 USB 2.0 x 2, VGA (external display), RJ45 (LAN), RJ11 (modem), IEEE1394, Headphone-out, Microphone-in, Power Adapter DC-in, Port Replicator Interface Four Programmable Application Launch Buttons (Internet, Email and two other software) BIOS Lock, Hard Disk Lock, LifeBook Lock, Anti-theft Lock Slot, Smart Card6 293mm (W) x 236.5mm (D) x 31.5mm min (H) Bundled Accessories Input AC 100 ~ 240V, Output DC 16V 60W CyberLink PowerDVD, Sonic RecordNow DX, Sonic DLA, Adobe Acrobat Reader 6.0, Fujitsu Hardware Diagnostic Tool Norman Virus Control & Norman Personal Firewall Optional Accessories Connector Interface: USB 2.0 x 2, VGA (external display), RJ45 (LAN), PS/2 (keyboard/mouse), Serial, Parallel, Power Adapter DC-in Replaceable with - Bay Battery, 6-cell Li-Ion 3800mAh, up to 5.9hrs1 battery life (Standard + Bay batteries) - DVD/CD-RW Combo Drive - Weight Saver External USB 1.44MB FDD USB Optical Scroll Mouse
Processor OS Supported Display Modular Bay Device Wireless LAN
Memory Hard Disk Battery Weight Chipset Secondary Cache Max. Memory Supported Hard Disk Drive Graphics Audio Communication User Interface Card Slot Connector Interface Quick Launch Panel Security7 Dimensions AC Adapter Bundled Software Software on CD Port Replicator Modular Bay Options
SINGAPORE: Fujitsu PC Asia Pacific Pte Ltd Tel : (65) Fax : (65) MALAYSIA: Fujitsu PC Asia Pacific Pte Ltd Tel : (60-3) Fax : (60-3) HONG KONG: Fujitsu PC Asia Pacific Ltd Tel : (852) Fax : (852) THAILAND: Fujitsu Systems Business (Thailand) Ltd PC Division Tel : (66-2) Fax : (66-2) AUSTRALIA: Fujitsu PC Australia Toll Free: 283 Tel : (61-2) Fax : (61-2) www.lifebook.com.au CHINA: Fujitsu PC China Division Tel : (86-21) Fax : (86-21) www.pc-cn.fujitsu.com PHILIPPINES: Fujitsu Philippines Inc. Tel : (63-2) Fax : (63-2) TAIWAN: Fujitsu Taiwan Ltd Tel : (886-2) Fax : (886-2) VIETNAM: Fujitsu Vietnam Ltd Tel : (84-4) 831 3895~7 Fax : (84-4) INDONESIA: PT Fujitsu Systems (Indonesia) Tel : (62-21) Fax : (62-21) Note: For countries not listed above, please contact our Singapore office.

Floppy Disk Drive Mouse

The above information shows the general technical specifications of the product and does not represent actual configuration. For specific configurations and their availability, please check with your local distributors.
It is natural for all thin-film transistor (TFT) liquid crystal displays (LCD) to show a small number of missing or discoloured dots. These are commonly known as non-conforming pixels. This is a technology limitation of TFT LCD and does not represent a defect. Fujitsu warranty does not cover limitations in technology such as non-conforming pixels. Specifications reflected above are engineering and hardware specifications. They do not represent actual usage or operating dimensions, sizes, performances and weights as these are dependent on factors such as operating temperature, type of operating system and application used, connected devices and accessories as well as hardware configurations of the notebook. Please check the compatibility of 3rd party accessories before purchase. Ambient temperature: 5 to 35C/41 to 95F (operating), -10 to 60C/14 to 140F (non-operating). Relative humidity: 20% to 80% RH (operating and non-operating).

www.pc-ap.fujitsu.com

All rights to the mentioned trademarks reside with their respective owners. Fujitsu endeavours to ensure that the information in this documentation is correct and fairly stated, but does not accept liability for any errors or omissions. The development of Fujitsu products and services is continuous and published information may not be up to date. It is important to check the current position with Fujitsu. The document is not part of the contract or licence save in so far as may be expressly agreed.

Dealer:

JOB NO.: 6276 Printed by Fujitsu PC Asia Pacific Pte Ltd in August 2005. Information is correct at time of printing.
Results obtained from Ziff Davis (BusinessWinstone 2001) Battery Mark V1.0.1 performed on systems with maximum battery life settings. Actual battery life will vary based on screen brightness, sound volume settings, running applications, connected peripherals, power management settings, battery conditioning, and other customer preferences. Modular Bay devices or hard drive usage may also have a significant impact on battery life. Maximum 56Kbps performance varies according to your local service providers' services as well as line condition. V.92 performance is dependent on local service providers' services. This term does not represent actual data rate of 100/10Mbps and simply indicates compliance with IEEE 802.3 and IEEE 802.3u standards. Actual maximum data rate depends on network configurations, cable conditions as well as connected devices. This term does not represent actual data rate of 4Mbps and simply indicates compliance with IrDA standard specification 1.1. Actual maximum data rate depends on local configurations and connected devices. Memory allocation (max. 128MB) can be pre-set in the BIOS setup for optimal graphics and system performance. The memory size available to the Operating System will be less than the total size of installed memory modules. Smart Card support requires a Smart Card adapter for the PC Card Slot. This is available as an accessory. Fujitsu does not provide the application for Smart Card solution. BIOS Lock needs a supervisor/user password to access BIOS setup. BIOS settings can be configured to prompt for password at every first bootup or all bootup sequences. Access to BIOS setup is needed to configure Hard Disk Lock. Hard Disk Lock requires an access key to retrieve data on the hard disk. This is a Data Confidentiality security feature. LifeBook Lock requires a supervisor/user password to bootup the LifeBook when it powers up or resumes last session from suspend/hibernate mode. This is an anti-theft feature with more than 800,000 password combinations using the buttons on the Quick Launch Panel. Anti-theft Lock Slot allows the use of a lock to physically secure the LifeBook. Smart Card usage is dependent on customer's solution. Full security unlock sequence - LifeBook Lock, Bootup Lock (BIOS Lock), Hard Disk Lock. NOTE: Loss of password requires the LifeBook to be returned to Japan factory for system refresh. Cost of shipment and lost data will be borne by the customer. Super G is a trademark of Atheros Communications. Super G mode delivers up to 108Mbps raw data rate with typical end user throughput exceeding 60Mbps in a wireless network environment where wirelessly connected equipment are using Atheros Super G enabled chipsets. It is not available in models bundled with Atheros Wireless network connection 802.11b. Some country configurations may be bundled with 802.11b WLAN e.g. Malaysia. Please check the country configuration with your local distributors.

doc1

BIOS SECTION S2020

LifeBook S Series Notebook BIOS

S Series BIOS

BIOS SETUP UTILITY
The BIOS Setup Utility is a program that sets up the operating environment for your notebook. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change the BIOS environment to operate your notebook. The BIOS Setup Utility configures:
5. To return to a menu from a submenu, press the [Esc] key. 6. To go to the Exit menu from any other menu, press the [Esc] key. P O I N TS
Selecting a field causes a help message about that field to be displayed on the right-hand side of the screen. Pressing the Enter key with the highlight on a selection that is not a submenu or auto selection will cause a list of all options for that item to be displayed. Pressing the Enter key again will select the highlighted choice.
Device control feature parameters, such as changing I/O addresses and boot devices. System Data Security feature parameters, such as passwords.
Entering the BIOS Setup Utility
To enter the BIOS Setup Utility do the following: 1. Turn on or restart your notebook. 2. Press the [F2] key when a message appears under the Fujitsu logo prompting you to Press <F2>: BIOS Setup. This will open the main menu of the BIOS Setup Utility with the current settings displayed. 3. Press the [RIGHT ARROW] or [LEFT ARROW] key to scroll through the other setup menus to review or alter the current settings.
7. Pressing the [F9] key resets all items in the BIOS to the default values. 8. Pressing the [F10] key saves the current configuration and exits the BIOS Setup Utility. You will be asked to verify this selection before it is executed. 9. Pressing the [F1] key gives you a general help screen.
Entering the Setup Utility After a Configuration Change or System Failure
If there has been a change in the system configuration that does not agree with the parameter settings stored in your BIOS memory, or there is a failure in the system, the system beeps and/or displays an error message after the Power On Self Test (POST). If the failure is not too severe, it will give you the opportunity to modify the settings of the setup utility, as described in the following steps: 1. When you turn on or restart the computer there is a beep and/or the following message appears on the screen: Error message - please run SETUP program Press <F1> key to continue, <F2> to run SETUP 2. If an error message is displayed on the screen, and you want to continue with the boot process and start the operating system anyway, press the [F1] key.
Navigating Through the Setup Utility
The BIOS setup utility consists of six menus: Main, Advanced, Security, Boot, Info and Exit. This document explains each menu in turn including all submenus and setup items. The following procedures allow you to navigate the setup utility menus: 1. To select a menu, use the cursor keys: [
2. To select a field within a menu or a submenu, use the cursor keys:

Figure 1.

Table 1: Fields, Options and Defaults for the Main Menu

Menu Field

System Time:

Options

Default

Description

Sets and displays the current time. Time is in a 24 hour format of hours:minutes:seconds with 2 digits for each. (HH:MM:SS). Example: 16:45:57. You may change each segment of the time separately. Move between the segments with the [Tab] key and/or [Shift] + [Tab] keys. Sets and displays the current date. Date is in a month/day/year numeric format with 2 digits each for month and day and 4 digits for year. (MM/DD/YYYY) for example: 03/20/1998. You may change each segment of the date separately. Move between the segments with the [Tab] key and/or [Shift] + [Tab] keys. 4

System Date:

Primary Master:
The product # of the Hard Drive
Display the type of device on this ATA/ATAPI interface, if there is one. Pressing the Enter key selects the Primary Master submenu allowing additional device configuration options for this interface. Display the type of device on this ATA/ATAPI interface, if there is one. Pressing the Enter key selects the Secondary Master submenu allowing additional device configuration options for this interface. The default setting differs between the US/European and the Japanese model. Selects the display language for the BIOS.
Selects Primary Master submenu

Secondary Master:

Selects Secondary Master submenu English (US) Japanese (JP)
The product # of the CD drive

Language:

[English (US)]
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies what ATA devices are installed. Note that actual hard drive label shown may vary. Depending on the drive type, information such as cylinders, heads and sectors may also be displayed.
PhoenixBIOS Setup Utility Main Primary Master [FUJITSU MHS2030AT-(PM)] Item Specific Help
Type: Total Sectors: Maximum Capacity:
[Auto] LBA Format 58605120 30006MB [16 Sectors] [Enabled] [Multiword DMA 2] [Disabled]
Select ATA/ATAPI drive installed here. [Auto] The BIOS auto-types the drive on boot time. Except [Auto] You enter parameters of the drive. [None] The drive is disabled.
Multi-Sector Transfers: LBA Mode Control: Transfer Mode: Ultra DMA Mode:
Figure 2. Primary Master Submenu

[Auto]

Selects the ATA/ATAPI device type. Select Auto to have the type automatically identified by the BIOS at POST. If None is selected, all of the following Set-up items do not appear. Select CD-ROM if a CD-ROM drive is installed at this connection. If Hard Disk is selected, you must specify the number of Cylinders, Heads, and Sectors for the drive. Logical Block Addressing (LBA)
Auto None CD-ROM Hard Disk
LBA Format Total Sectors: Maximum Capacity: CHS Format Cylinders:

The total number of sectors on your hard disk The maximum capacity of your hard disk
Cylinders/Heads/Sectors A number between 0 and 65,535 This item is active only when Hard Disk is selected as the type. This field is changed by incrementing (pressing the [Spacebar]) or by typing in the number.

Heads:

This item is active only when Hard Disk is selected as type. You can change the value by incrementing (pressing the [Spacebar]) or by typing in the number. This item is active only when Hard Disk is selected as type. You can change the value by incrementing (pressing the [Spacebar]) or by typing in the number. Displays the maximum capacity of the drive calculated from the parameters of the hard disk when Auto is selected and the type is identified as hard disk. This option cannot be changed when Auto is selected. Specify the number of sectors per block for multiple sector transfer.
A number between 1 and 16

Sectors:

A number between 0 and 63

Maximum Capacity:

Display only

Multi-Sector Transfers:

Disabled 2 Sectors 4 Sectors 8 Sectors 16 Sectors Disabled Enabled Standard Fast PIO 1 Fast PIO 2 Fast PIO 3 Fast PIO 4 Multiword DMA 1 Multiword DMA 2 Disabled Mode 0 Mode 1 Mode 2 Mode 3 Mode 4 Mode 5

[16 Sectors]

LBA Mode Control:

[Enabled]

Enables or disables logical Block Addressing in place of Cylinder, Head, Sector addressing. This option cannot be changed when Auto is selected. Selects the method for moving data to/from the drive. Autotype the drive to select the optimum transfer mode. This option cannot be changed when Auto is selected.

Transfer Mode:

[Multiword DMA 2]

Ultra DMA Mode:

[Disabled]
Selects the method for moving data to/from the drive. Autotype the drive to select the optimum transfer mode. This option cannot be changed when Auto is selected.

CAUTION

A bootable CD-ROM may have either a floppy disk or hard drive format. When the bootable CD-ROM is used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk format CD-ROM is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: designation if a formatted internal hard drive is present since the C: designator is always reserved for the internal hard drive.The boot sequence ignores the new drive designations, however, your application software will use the new designations. Be careful of the operating environment when booting from a CD-ROM or you may overwrite files by mistake.
Secondary Master Submenu of the Main Menu
The Secondary Master submenu is for the internal CDROM drive. The drive type is displayed on this menu as well as the Main menu. Your notebook auto-senses the characteristics of the internal drive installed. You will not need to modify these settings; they are displayed for your reference. Note that actual drive labels shown may vary.

PhoenixBIOS Setup Utility Main Secondary Master [CD-224E-(SM)] Item Specific Help
Type: Multi-Sector Transfers: LBA Mode Control: Transfer Mode: Ultra DMA Mode:
[Auto] [Disabled] [Disabled] [Standard] [Disabled]
Figure 3. Secondary Master Submenu
Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu
Selects the ATA/ATAPI device type. Select Auto to have the type automatically identified by the BIOS at POST. If None is selected, all of the following Set-up items do not appear. Select CD-ROM or Hard Disk for appropriate drive type installed at this connection. This option cannot be changed when Auto is selected. Specify the number of sectors per block for multiple sector transfer.
Auto None CD-ROM Hard Disk Disabled 2 Sectors 4 Sectors 8 Sectors 16 Sectors Disabled Enabled
Enables or disables Logical Block Addressing in place of Cylinder, Head, Sector addressing. This option cannot be changed when Auto is selected.

[Standard]

Standard Fast PIO 1 Fast PIO 2 Fast PIO 3 Fast PIO 4 Multiword DMA 1 Multiword DMA 2 Disabled Mode 0 Mode 1 Mode 2 Mode 3 Mode 4 Mode 5
Exiting from Main Menu When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu or to move to another menu.
ADVANCED MENU SETTING DEVICE FEATURE CONTROLS
The Advanced Menu allows you to: Set the I/O addresses for the serial and parallel ports. Set the features of the keyboard/mouse. Select between the display panel and/or an external CRT display. Set internal device configurations Configure USB features. Configure miscellaneous features such as Wake Up On LAN. Configure DMI Event Logging. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating Through the Setup Utility on page 2 for more information) The following tables show the names of the menu fields for the Advanced Menu and its submenus, all of the options for each field, the default settings and a description of the fields function, and any special information needed to help understand the fields use.
Serial/Parallel Port Configurations Keyboard/Mouse Features Video Features Internal Device Configurations USB Features Miscellaneous Configurations Event Logging
Configures serial ports and parallel ports

Figure 4. Advanced Menu

Advanced Menu
Table 4: Fields, Options and Defaults for the Advanced Menu
Serial/Parallel Port Configurations Keyboard/Mouse Features Video Features
When selected, opens the Serial/Parallel Port Configurations submenu which allows the user to modify settings for serial, infrared and parallel ports. When selected, opens the Keyboard/Mouse Features submenu, which allows setting external and internal keyboard and mouse parameters. When selected, opens the Video Features submenu, which allows setting of the display parameters, including routing of video signals to different displays. When selected, opens the Internal Device Configuration submenu, which allows enabling or disabling the Floppy Disk, IDE, and LAN Controllers. Configures USB features. Configures miscellaneous features, such as Wake Up On LAN and Power Button.

Internal Device Configurations USB Features Miscellaneous Configurations Event Logging
When selected, opens the event logging submenu.
Serial/Parallel Port Configuration Submenu of the Advanced Menu
The Serial/Parallel Port Configuration submenu provides the ability to set the I/O addresses and interrupt levels for the serial, infrared, and parallel ports of your notebook. POINTS
I/O addresses, DMA channels, and Interrupt levels can be entered in various ways, including via the BIOS setup utility, the control software for the I/O device, or the hardware. If any two ports or devices, serial or parallel, have the same I/O address assigned your notebook will not function normally. Please keep a record of original settings before making any changes in the event that a restoration is required. See your hardware and software documentation as well as the setup utility to determine settings, limitations, etc.
To prevent IRQ and address conflicts, avoid changing the default settings. The BIOS will warn you of resource conflicts by placing a yellow asterisk next to each device that is in conflict. All I/O addresses in Table 5 are in hexadecimal.
PhoenixBIOS Setup Utility Advanced Serial/Parallel Port Configurations Serial Port: I/O Address: Interrupt: Infrared Port: Mode: I/O Address: Interrupt: DMA Channel: Parallel Port: Mode: I/O Address: Interrupt: [Enabled] [3F8-3FF] [IRQ 4] [Enabled] [FIR] [2E8 - 2EF] [IRQ 3] [DMA 3] [Enabled] [Bi-directional] [378-37F] [IRQ 7] Item Specific Help [Disabled] The port is disabled. [Enabled] The port is enabled with user configuration. [Auto] Plug & Play OS configure the port.
Figure 5. Serial/Parallel Port Configuration Submenu
Table 5: Fields, Options and Defaults for Serial/Parallel Port Configuration Submenu of Advanced Menu

Serial Port:

Configures the serial port using either no configuration (Disabled), a user defined configuration (Enabled), or by allowing the BIOS or OS to choose the configuration (Auto). Allows user to set the serial port base I/O address when serial port is Enabled.
Disabled Enabled Auto 3F8 - 3FF 2F8 - 2FF 3E8 - 3EF 2E8 - 2EF IRQ 3 IRQ 4 IRQ 10 IRQ 11 Disabled Enabled Auto IrDA FIR 3F8 - 3FF 2F8 - 2FF 3E8 - 3EF 2E8 - 2EF IRQ 3 IRQ 4 IRQ 10 IRQ 11 DMA 0 DMA 1 DMA 3 Disabled Enabled Auto Output Only Bi-directional ECP

I/O Address:

[3F8 - 3FF]

Interrupt:

[IRQ 4]
Allows user to set the serial port interrupt when serial port is Enabled.

Infrared Port:

Configures the infrared port using either no configuration (Disabled), a user defined configuration (Enabled), or by allowing the BIOS or OS to choose the configuration (Auto). When the infrared port is enabled this option is available allowing the user to set the mode for the infrared port. Allows user to set the infrared port I/O address when the infrared port is Enabled.

[2E8 - 2EF]

[IRQ 3]
Allows user to set the infrared port interrupt when the infrared port is Enabled.

DMA Channel:

[DMA 3]
Allows user to set the infrared port DMA Channel when the infrared port is Enabled.

Parallel Port:

Configures the parallel port using either no configuration (Disabled), a user defined configuration (Enabled), or by allowing the BIOS or OS to choose the configuration (Auto). When the parallel port is enabled this option is available allowing the user to set the mode for the parallel port. Bi-directional allows two-way transfer of information between your notebook and a parallel device. Output Only (Half Duplex) allows information to be transferred in only one direction, from your notebook to the printer or similar device. ECP Mode allows communication with the ECP class of parallel I/O devices. Allows user to set the parallel port base I/O address when the parallel port is Enabled.

[Bi-directional]

378 - 37F 278 - 27F 3BC - 3BF IRQ 5 IRQ 7

[378 - 37F]

[IRQ 7]
Allows user to set the parallel port interrupt when the parallel port is Enabled.
Keyboard/Mouse Features Submenu of the Advanced Menu
The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and keyboard.
PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help

Keyboard/Mouse Features

Numlock: [Auto] Hot Plug: [Enabled] Internal Pointing Device: [Auto Disabled] Initialization on Resume: [Fast]
Selects power-on state for Numlock.
Figure 6. Keyboard/Mouse Features Submenu
Table 6: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu

Numlock:

Sets the NumLock function state when the computer completes booting.
Auto On Off Disabled Enabled Auto Disabled Manual Setting Always Enabled Always Disabled

Hot Plug:

Enables and disables the ability to plug a mouse or keyboard into the PS/2 port and have it immediately recognized and active. Sets the device controlling the mouse cursor on the screen. Always Enabled makes the pointing device always enabled whether there is an external mouse or not. Always Disabled makes the pointing device always disabled. Auto Disabled disables the internal pointing device when an external pointing device is connected to the PS/2 port. Manual Setting allows the device to be enabled or disabled using a Hot Key. When Fast is selected, initialization for the external PS/2 devices is optimized to speed up on Resume. When Normal is selected, initialization is not optimized.

Internal Pointing Device:

[Auto Disabled]

Initialization on Resume:

Fast Normal

[Fast]
Video Features Submenu of the Advanced Menu
The Video Features Submenu is for setting the display parameters.

Video Features

Display: Compensation:
[Internal Flat Panel] [Disabled]

Select display terminal.

Figure 7. Video Features Submenu
Table 7: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu

Display:

[Internal Flat Panel]
Selects where the video signal will be routed.
Internal Flat Panel External Simultaneous Disabled Enabled

Compensation:

Enables or disables display compensation.
Internal Device Configurations Submenu of the Advanced Menu
The Internal Device Configuration submenu allows the user to configure other internal devices.
PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help [Disabled] No IDE ports are enabled. [Primary] Only primary IDE port is enabled. [Secondary] Only secondary IDE port is enabled. [Both] Both primary and secondary IDE ports are enabled.
Internal Device Configurations
IDE Contoller: Modem Controller: LAN Controller:

[Both [Enabled] [Auto]

Figure 8. Internal Device Configuration Submenu
Table 8: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu

IDE Controller:

[Both]
Enables or disables selected IDE devices.
Disabled Primary Secondary Both Disabled Enabled Disabled Enabled Auto

Modem Controller:

Enables or disables the modem device.

LAN Controller:

Enables or disables the LAN controller.When Auto is selected, the LAN will be disabled when the system is running on battery power
USB Features Submenu of the Advanced Menu
The USB Features Submenu configures the USB features for your system.

USB Features

Legacy USB Support:
[Disabled] The feature is disabled. [Enabled] Legacy Floppy Emulation is enabled and USB floppy is available without USB aware OS.
Figure 9. USB Features Submenu
Table 9: Fields, Options and Defaults for the ACPI Features Submenu of the Advanced Menu

USB Floppy Disk:

When Disabled is selected, legacy floppy emulation is disabled. When Enabled is selected, legacy floppy emulation is enabled and USB floppy is available without USB-aware OS.

Disabled Enabled

Miscellaneous Configurations Submenu of the Advanced Menu
The Miscellaneous Configurations Submenu configures the miscellaneous features for your system.
Miscellaneous Configurations
Power Button: Wake up on LAN: Volume Setting: UMA Video Memory Size:

[Disabled] [Disabled] [Middle] [16MB]
Configures the power button. *ACPI OS ignores this setting.
Figure 10. Miscellaneous Configurations Submenu
Table 10: Fields, Options and Defaults for the Miscellaneous Configurations Submenu

Power Button:

[DIsabled]
When Disabled is selected, the power button does not respond to a press. When Power Off is selected, the button turns the power off. When Enabled is selected, the system will wake up when the internal LAN device receives a Magic Packet while the system is powered off. Allows you to set or disable the system volume level.
Disabled Power Off Disabled Enabled Off Minimum Middle Maximum 16MB 32MB 64MB 128MB

Wake up on LAN:

Volume Setting:

[Middle]

UMA Video Memory Size:

[16MB]

Allows you to select the amount of video memory you want to use.
Event Logging Submenu of the Advanced Menu
The Event Logging Submenu configures event logging features for DMI events.

Event Logging

Event Log Capacity: Event Log Validity: View Event Log: Event Logging: System Boot Event: Clear All Event Logs: Mark Events as Read:
Space Available Valid [Enter] [Enabled] [Disabled] [No] [Enter]
Press <Enter> key to view the contents of the event log.
Figure 11. Event Logging Submenu
Table 11: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu
Event Log Capacity: Event Log Validity: View Event Log: Event Logging:

Space Available

Display only.
Valid Enter Disabled Enabled Disabled Enabled No Yes Enter [Enter] [Enabled]
Display only. Allows you to view content of event log. Turns event logging on and off for all DMI events.
System Boot Event: Clear All Event Logs: Mark Events as Read:
Turns event logging on and off for DMI system boot events.
When set to [Yes] all event logs will be cleared at next boot.

[Enter]

Allows you to make all events currently in the event log as read.
SECURITY MENU SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security features of your notebook to fit your operating needs and to view the current data security configuration. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating Through the Setup Utility on page 2 for more information) The following tables show the names of the menu fields for the Security menu and its submenus, the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. The default condition is no passwords required and no write protection. CAUTION

Entering a password incorrectly three times in a row will cause the keyboard and mouse to be locked out and the warning [System Disabled] to be displayed. If this happens, restart the computer by turning off and on the power with the power switch and use the correct password on reboot.
If you set a password, write it down and keep it in a safe place. If you forget the password you will have to contact your support representative to regain access to your secured functions and data. If you make an error when re-entering the password a [Warning] will be displayed on the screen. To try again press the [Enter] key and then retype the password. Press the [Esc] key to abort the password setting process. If the Password on Boot is Disabled you will not have to type your password upon resuming the system from the Suspend or Save-to-Disk modes.
Supervisor Password Is: User Password Is: Set Supervisor Password Set User Password Minimum User Password Length: Password on Boot: On Automatic Wake up: KB Lock on Resume: Boot from Removable Media:
Clear Clear [Enter] [Enter] [0] [Disabled] [Disabled] [Disabled] [All] Press [Enter] key to set Supervisor Password to enable any password features. Then password entry is required to enter BIOS Setup.
Hard Disk Security Owner Information Security Panel On Resume: [Enabled]

Figure 12. Security Menu

Security Menu
Table 12: Fields, Options and Defaults for the Security Menu
Supervisor Password is: User Password is:
A display-only field. Set is displayed when the system Supervisor Password is set and Clear when it is not. A display-only field. Set is displayed when the general User Password is set, and Clear when it is not. Sets, changes or cancels Supervisor Password. The Supervisor Password may be up to seven characters long and include only letters or numbers (no symbols). Passwords are NOT case- sensitive. To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a Supervisor Password is set it must be used to access the BIOS setup utility. This field can only be accessed if the Supervisor Password is set. Sets, changes or cancels the User Password. The User Password may be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a User Password is set it must be used to access the BIOS setup utility. Sets the minimum length for User Password.

Set Supervisor Password

Set User Password
Minimum User Password Length: Password on Boot:
Disabled First Boot Every Boot
When Enabled, a password (User or Supervisor) is required after the Power On Self Test (POST) before the operating system will be read from a disk. When set to Disabled no password is required. If no Supervisor Password is set this feature is not available and no password is required. This field is active only when Password On Boot is set to First Boot or Every Boot. When disabled, password entry is not required on automatic wake up on LAN or Real Time Clock. When enabled, the password is still required on automatic wake up. When set to Enabled, the PS/2 keyboard and mouse inputs are locked out upon unattended boot via LAN until the password is entered. When both passwords are set, the User password is always used to lock. Password entry before OS boot is disabled upon unattended boot. Enable password allows supervisor access only.

On Automatic Wake up:

KB Lock on Resume:
Boot from Removable Media: Hard Disk Security: Owner Information: Security Panel On Reume

All Supervisor only

Configures hard disk security features. Sets Owner information.
Allows the Security Panel Feature to be enabled or disabled upon Suspend from Resume.
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security Submenu is for configuring hard disk security features.

Hard Disk Security

Primary Master Password Is: Secondary Master Password Is: Set Primary Master Password Set Secondary Master Password
Clear Not Available [Enter] [Enter]
Press <Enter> key to set Hard Disk Password. The hard disk is locked with the password. Data in the locked disk can not be read on other systems.
Figure 13. Hard Disk Security Submenu
Table 13: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Primary Master Password Is:: Secondary Master Password Is: Set Primary Master Password
A display-only field. Set is displayed when the Master Password is set and Clear when it is not. A display-only field. Not Available is displayed.
Sets, changes or cancels Primary Master Password. The Primary Master Password may be up to seven characters long and include only letters or numbers (no symbols). Passwords are NOT case- sensitive. To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a Primary Master Password is set it must be used to access the hard disk. Data on the hard disk cannot be read on other systems. Not currently available.

Set Secondary Master Password
Owner Information Submenu of the Security Menu
The Owner Information Submenu is for setting owner information. Note that Owner Information cannot be set without having entered a supervisors password.

Owner Information

Owner Information Is: Set Owner Information Foreground Color: Background Color:
Clear [Enter] [Gray] [Black]
Press <Enter> key to set owner information. Up to 80 characters can be set. Available characters are ASCII codes from 32 through 126. The owner information is always displayed at the bottom line of the screen during POST.
Figure 14. Owner Information Submenu
Table 14: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu
Owner Information Is: Set Owner Information: Foreground Color:
Field to write owner information, e.g., your name. Set foreground color.
Black Blue Green Cyan Black Blue Green Cyan
Red Magenta Brown White Red Magenta Brown White
Gray Light Blue Light Green Light Cyan Gray Light Blue Light Green Light Cyan
Light Red Light Magenta Yellow Bright White Light Red Light Magenta Yellow Bright White

[Gray]

Background Color:

[Black]

Sets background color.
Exiting from the Security Menu
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to another menu, use the cursor keys.
BOOT MENU SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the BIOS searches sources for the operating system. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating Through the Setup Utility on page 2 for more information) The following tables show the names of the menu fields for the Boot menu and its submenu, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use.
PhoenixBIOS Setup Utility Security Boot Info Exit Item Specific Help
Quick Boot: Boot Time Diagnostic Screen: Preboot Execution Environment: Boot Device Priority
[Enabled] [Disabled] [Disabled] [Disabled] All diagnostic tests will be done. [Enabled] Some diagnostic tests may be skipped while booting to speed up.
Table 15: Fields, Options and Defaults for the Boot Menu

Quick Boot:

Boot Time Diagnostic Screen: Preboot Execution Environment: Boot Device Priority:
Select Item -/Space Change Values Select Sub-Menu Select Menu Enter

Figure 15. Boot Menu

Turns on and off booting with a truncated set of Power On Self Tests. (Fewer tests mean faster turn on.) Turns on and off display of test results instead of Fujitsu logo screen during Power On Self Test. Turns on and off boot from network server options.

Setup Defaults Save and Exit
Table 17: Fields, Options and Defaults for the Info Menu Note that the parameters listed in the following table may be different, depending upon your system configuration.
BIOS Version: BIOS Date: BIOS Area: CPU Type: L1 Cache:: 1.25 02/26/2004 E000h FFFFh AMD Athlon(tm) XP-M (LV) 128 KB
L2 Cache: Total Memory: Memory Slot 1: Memory Slot 2: 512 KB 256 MB

256 MB DDR SDRAM None

Exit Menu
EXIT MENU LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating Through the Setup Utility on page 2 for more information). The following table shows the names of the menu fields for the Exit menu, the default settings and a description of the field's function and any special information needed to help understand the field's use.
PhoenixBIOS Setup Utility Security Boot Exit Item Specific Help Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes
Exit System Setup and save your changes to CMOS.

Figure 18. Exit Menu

Table 18: Fields, Options and Defaults for the Exit Menu

Exit Saving Changes

Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS memory and then exit the setup utility. A confirmation message Save Configuration changes and exit now? [Yes] [No] will be displayed. Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to the BIOS memory. When the BIOS recognizes this selection it will load the operating system and begin operation. Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then display the message Load default configuration now? [Yes] [No]. When confirmed the setup utility will return to the Exit Menu. To return to another menu follow the directions in the Navigating Through the Setup Utility Section. Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The message Load previous now? [Yes] [No] will be displayed. When confirmed the utility will return to the Exit menu. To return to another menu, follow the directions in the Navigating Through the Setup Utility Section. Selecting Save Changes causes the new settings in all menus to be written to the BIOS memory. The message Save configuration changes now? [Yes] [No] will be displayed. When confirmed, the setup utility will return to the Exit menu. To go to another menu, follow the directions in the Navigating Through the Setup Utility section.
Exit Discarding Changes Load Setup Defaults

Discard Changes

Save Changes

 

Tags

RM-V310A 205BW Minolta 1216 WD-14312RD T8090A Drive Volvo C70 1788R Lexmark Z730 St 800 BMW 318D KX-TG1312EG 20HF5234 10 Cityscape HP-J157PMD Gr-dx95 IC-V200T BH-211 DPF-1030 552 RC 1800FP TX-21S3T RSG5furs SA-HE75 Mw12C Dvcr-Y70 MEX-BT3807U EAH2600 Electronic DMR-E60 Hobbymatic 803 MP240 Dimage G600 Wacs7000 12 SU-33W CDP-CE305 EL-509E CAW-canun1 AQV12vbcn XP-60 Hdcsdx1 C70-2000 HK620 1 4X DX3850 10270 8240HD DR175B MPC400 CDX-GT29 Coffee KX-DT321 AQV09vban Mouse BF-030 W PS42P2SB Mansion 640 E01E HD040GJ-P L12710VIT 47LY3RF Sirius A8N-E Flash Goldmikemkii Eu R08 Kxtg2512FX XD203 TDS370T Makita 4328 CS-A12HKD ZR45MC - Stereovitalizer 725MP Photosmart 3300 SCH-S470 Varispeed G7 Specs T8511 Dv50h3 2263UW DV2000ST Antispyware 2008 CDX-CA590X 29PT5408 01 Digitech BP80 A45-S150 NAD S500 MV500I KD-LH3101 I8910 WD-1080FD Varispeed V7 O Sd ED DV3250 KX-TG1100GR ZWF1421 Ctwo 800 GR-S392GC

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101