LifeBook S7010
Small 14" footprint, thin and light at less than 2kg Peace of mind with superior security features Seamless communications with wireless 802.11b/g9 Gigabit Ethernet, IrDA 1.1 and Bluetooth v1.2 Ergonomically designed features - comfortable palm rest with full-sized keyboard, front wireless connection ON/OFF switch, three USB 2.0 ports (rear x 2, right x 1) among others
S7010 Recommended Configurations Intel Centrino Mobile Technology Intel Centrino Mobile Technology - Intel Pentium M Processor 745 - Intel Pentium M Processor 725 (1.80GHz, 2MB L2 cache, 400MHz FSB) (1.60GHz, 2MB L2 cache, 400MHz FSB) - Intel PRO/Wireless 2200BG9 Network Connection - Intel PRO/Wireless 2200BG9 Network Connection 855GME Chipset - Intel - Intel 855GME Chipset Microsoft Windows XP Home Edition Microsoft Windows XP Professional Edition 14" XGA TFT, 1024 x 768 pixels DVD Super Multi Drive8 DVD/CD-RW Combo Drive Integrated (v1.2) 1GB DDR333 256MB DDR333 80GB 60GB 1 (6-cell Li-Ion 4800mAh) Up to 4.2hrs Up to 4.4hrs1 (6-cell Li-Ion 4800mAh) Approx. 1.75kg (w/ Weight Saver) Specifications 2MB 2048MB DDR333 Ultra DMA/100 and S.M.A.R.T support Integrated Intel Extreme Graphics 2 with DVMT2 delivers low-power, high-performance 2D/3D graphics, video, and display capabilities at a maximum shared memory of 64MB. SigmaTel STAC9751T AC97 codec with built-in dual Stereo Speakers 56K V.923 modem, IrDA 1.1 4Mbps5, 1000/100/10Mbps4 Gigabit Ethernet and Intel PRO/Wireless 2200BG9 network connection with Dual Antenna. Separate ON/OFF switch for wireless network connection Keyboard with Quick Point: 84-key, 19mm key pitch, 3mm key stroke Touch Pad with Fingerprint Sensor PC Card Type I/II x 2 or Type III x 1, Smart Card support6 USB 2.0 x 3, VGA (external display), RJ45 (LAN), RJ11 (modem), Audio Line-in, IEEE1394, Headphone-out, Microphone-in, Power Adapter DC-in, Port Replicator Interface Four Programmable Application Launch Buttons (Internet, Email and two other software) BIOS Lock, Hard Disk Lock, LifeBook Lock, Anti-theft Lock Slot, Smart Card6, Fingerprint Sensor 306mm (W) x 247mm (D) x 25.4mm min (H) Bundled Accessories Input AC 100 ~ 240V, Output DC 19V 60W Softex OmniPass 3.0, CyberLink PowerDVD, CyberLink PowerProducer, Sonic RecordNow DX, Sonic DLA, Adobe Acrobat Reader 6.0, Fujitsu UPDATE NAVI, Fujitsu Hardware Diagnostic Tool Norman Virus Control & Norman Personal Firewall Connector Interface: USB 2.0 x 4, Headphone-out, Microphone-in, DVI-D, VGA (external display), RJ45 (LAN), PS/2 (keyboard/mouse), Serial, Parallel, Power Adapter DC-in Optional Replaceable with - Bay Battery, 6-cell Li-Ion 3800mAh, up to 8hrs1 battery life (Standard + Bay batteries) - DVD Super Multi Drive8 - DVDRW Drive - DVD/CD-RW Combo Drive - DVD-ROM Drive - Weight Saver External USB 1.44MB FDD RF Wireless Optical Mouse10

Platform

OS Supported Display Modular Bay Drive Bluetooth Memory Hard Disk Battery Weight Secondary Cache Max. Memory Supported Hard Disk Drive Graphics Audio Communication User Interface Card Slot Connector Interface Quick Launch Panel Security7 Dimensions AC Adapter Bundled Software Software on CD Port Replicator
SINGAPORE: Fujitsu PC Asia Pacific Pte Ltd Tel : (65) Fax : (65) MALAYSIA: Fujitsu PC Asia Pacific Pte Ltd Tel : (60-3) Fax : (60-3) HONG KONG: Fujitsu PC Asia Pacific Ltd Tel : (852) Fax : (852) THAILAND: Fujitsu Systems Business (Thailand) Ltd PC Division Tel : (66-2) Fax : (66-2) AUSTRALIA: Fujitsu PC Australia Toll Free: 283 Tel : (61-2) Fax : (61-2) www.lifebook.com.au CHINA: Fujitsu PC China Division Tel : (86-21) Fax : (86-21) www.pc-cn.fujitsu.com PHILIPPINES: Fujitsu Philippines Inc. Tel : (63-2) Fax : (63-2) TAIWAN: Fujitsu Taiwan Ltd Tel : (886-2) Fax : (886-2) VIETNAM: Fujitsu Vietnam Ltd Tel : (84-4) 831 3895~7 Fax : (84-4) INDONESIA: PT Fujitsu Systems (Indonesia) Tel : (62-21) Fax : (62-21) Note: For countries not listed above, please contact our Singapore office.

Modular Bay Options

Floppy Disk Drive Mouse
The above information shows the general technical specifications of the product and does not represent actual configuration. For specific configurations and their availability, please check with your local distributors. Results obtained from Ziff Davis (BusinessWinstone 2001) Battery Mark V1.0.1 performed on systems with maximum battery life settings. Actual battery life will vary based on screen brightness, sound volume settings, running applications, connected peripherals, power management settings, battery conditioning, and other customer preferences. Modular Bay devices or hard drive usage may also have a significant impact on battery life. Dynamic Video Memory Technology (DVMT) dynamically responds to application requirement and efficiently allocates the proper amount of memory (max. 64MB) for optimal graphics and system performance. The memory size available to the Operating System will be less than the size of installed memory module. 3 Maximum 56Kbps performance varies according to your local service providers' services as well as line condition. V.92 performance is dependent on local service providers' services. 4 This term does not represent actual data rate of 1000/100/10Mbps and simply indicates compliance with IEEE 802.3, IEEE 802.3u and IEEE 802.3ab standards. Actual maximum data rate depends on network configurations, cable conditions as well as connected devices. 5 This term does not represent actual data rate of 4Mbps and simply indicates compliance with IrDA standard specification 1.1. Actual maximum data rate depends on local configurations and connected devices. 6 Smart Card support requires a Smart Card adapter for the PC Card Slot. This is available as an accessory. Fujitsu does not provide the application for Smart Card solution. 7 BIOS Lock needs a supervisor/user password to access BIOS setup. BIOS settings can be configured to prompt for password at every first bootup or all bootup sequences. Access to BIOS setup is needed to configure Hard Disk Lock. Hard Disk Lock requires an access key to retrieve data on the hard disk. This is a Data Confidentiality security feature. LifeBook Lock requires a supervisor/user password to bootup the LifeBook when it powers up or resumes last session from suspend/hibernate mode. This is an anti-theft feature with more than 800,000 password combinations using the buttons on the Quick Launch Panel. Anti-theft Lock Slot allows the use of a lock to physically secure the LifeBook. SmartCard usage is dependent on customer's solution. Fingerprint sensor uses AuthenTec TruePrint Technology and Softex OmniPass to remember customer's list of user IDs and passwords. Full security unlock sequence - LifeBook Lock, Bootup Lock (BIOS Lock), Hard Disk Lock, FIngerprint Windows Logon. NOTE: Loss of password requires the LifeBook to be returned to Japan factory for system refresh. Cost of shipment and lost data will be borne by the customer. 8 Supports DVD-RAM, DVD+RW, DVD+R, DVD-RW, DVD-R, CD-RW, CD-R, CD-ROM and DVD-ROM formats. 9 Some country configurations may be bundled with 802.11b WLAN e.g. Malaysia. Please check the country configuration with your local distributors. 10 Available in Hong Kong, Malaysia and Singapore only. It is natural for all thin-film transistor (TFT) liquid crystal displays (LCD) to show a small number of missing or discoloured dots. These are commonly known as non-conforming pixels. This is a technology limitation of TFT LCD and does not represent a defect. Fujitsu warranty does not cover limitations in technology such as non-conforming pixels. Specifications reflected above are engineering and hardware specifications. They do not represent actual usage or operating dimensions, sizes, performances and weights as these are dependent on factors such as operating temperature, type of operating system and application used, connected devices and accessories as well as hardware configurations of the notebook. Please check the compatibility of 3rd party accessories before purchase. Ambient temperature: 5 to 35C/41 to 95F (operating), -10 to 60C/14 to 140F (non-operating). Relative humidity: 20% to 80% RH (operating and non-operating).

BLUETOOTH is a trademark owned by its proprietor and used by Fujitsu under license.

www.pc-ap.fujitsu.com

All rights to the mentioned trademarks reside with their respective owners. Fujitsu endeavours to ensure that the information in this documentation is correct and fairly stated, but does not accept liability for any errors or omissions. The development of Fujitsu products and services is continuous and published information may not be up to date. It is important to check the current position with Fujitsu. The document is not part of the contract or licence save in so far as may be expressly agreed.

Dealer:

JOB NO.: 5946 Printed by Fujitsu PC Asia Pacific Pte Ltd in November 2004. Information is correct at time of printing.

BIOS SECTION S7010

LifeBook S Series Notebook BIOS

S Series BIOS

BIOS SETUP UTILITY
The BIOS Setup Utility is a program that sets up the operating environment for your notebook. Your BIOS is set at the factory for normal operating conditions, therefore there should be no need to set or change the BIOS environment to operate your notebook. The BIOS Setup Utility configures:
Selecting a field causes a help message about that field to be displayed on the right-hand side of the screen. Pressing the Enter key with the highlight on a selection that is not a submenu or auto selection will cause a list of all options for that item to be displayed. Pressing the Enter key again will select the highlighted choice.
Device control feature parameters, such as changing I/O addresses and boot devices. System Data Security feature parameters, such as passwords.
Entering the BIOS Setup Utility
To enter the BIOS Setup Utility do the following: 1. Turn on or restart your notebook. 2. Press the [F2] key when a message appears under the Fujitsu logo prompting you to Press <F2>: BIOS Setup. This will open the main menu of the BIOS Setup Utility with the current settings displayed. 3. Press the arrow keys to scroll through the other setup menus to review or alter the current settings.
7. Pressing the [F9] key resets all items in the BIOS to the default values. 8. Pressing the [F10] key saves the current configuration and exits the BIOS Setup Utility. You will be asked to verify this selection before it is executed. 9. Pressing the [F1] key gives you a general help screen.
Entering the Setup Utility After a Configuration Change or System Failure
If there has been a change in the system configuration that does not agree with the parameter settings stored in your BIOS memory, or there is a failure in the system, the system beeps and/or displays an error message after the Power On Self Test (POST). If the failure is not too severe, it will give you the opportunity to modify the settings of the setup utility, as described in the following steps: 1. When you turn on or restart the computer there is a beep and/or the following message appears on the screen: Error message - please run SETUP program Press <F1> key to continue, <F2> to run SETUP 2. If an error message is displayed on the screen, and you want to continue with the boot process and start the operating system anyway, press the [F1] key.
Navigating Through the Setup Utility
The BIOS setup utility consists of six menus: Main, Advanced, Security, Boot, Info and Exit. This document explains each menu in turn including all submenus and setup items. The following procedures allow you to navigate the setup utility menus:
], [ ]. 1. To select a menu, use the cursor keys: [ 2. To select a field within a menu or a submenu, use the

cursor keys:

[ ], [ ].
3. To select the different values for each field, press the [Spacebar] to change to the next higher selection and [F5] or [-] to go to the next lower selection. 4. To activate a submenu press the [Enter] key. 5. To return to a menu from a submenu, press the [Esc] key. 6. To go to the Exit menu from any other menu, press the [Esc] key.

If your notebook emits a series of beeps that sounds like a code and the display is blank, refer to the Troubleshooting section of your system Uses Guide. The Troubleshooting Section includes a list of error messages and their meanings. If your data security settings require it, you may be asked for a password before the operating system will be opened.

Main Menu

3. If an error message is displayed on the screen, and you want to enter the setup utility, press the [F2] key. 4. When the setup utility starts with a fault present, the system displays the following message: Warning! Error message [Continue] 5. Press any key to enter the setup utility. The system will then display the Main Menu with current parameters values.
MAIN MENU SETTING STANDARD SYSTEM PARAMETERS
The Main Menu allows you to set or view the current system parameters. Follow the instructions for Navigating Through The Setup Utility to make any changes. (See Navigating Through the Setup Utility on page 2 for more information) The following tables show the names of the menu fields for the Main menu and its submenus, all of the options for each field, the default settings and a description of the fields function and any special information needed to help understand the fields use. Note that the actual drive labels shown may vary.
System Time and System Date can also be set from your operating system without using the setup utility. Use the calendar and time icon on your Windows Control panel or type time or date from the MSDOS prompt.

Advanced

PhoenixBIOS Setup Utility Security Boot Info

Exit Item Specific Help

System Time: System Date:
[02:34:56] [03/17/2004] [TOSHIBA MK4025GAS-(PM)] [None)] [English (US)] Adjust calendar clock. <Tab>, <Shift-Tab>, or <Enter> selects field.
Primary Master Secondary Master Language:

F1 Help ESC Exit

Select Item Select Menu
-/Space Change Values Enter Select Sub-Menu
F9 Setup Defaults F10 Save and Exit

Figure 1.

Table 1: Fields, Options and Defaults for the Main Menu

Menu Field

System Time:

Options

Default

Description

Sets and displays the current time. Time is in a 24 hour format of hours:minutes:seconds with 2 digits for each. (HH:MM:SS). Example: 16:45:57. You may change each segment of the time separately. Move between the segments with the [Tab] key and/or [Shift] + [Tab] keys. Sets and displays the current date. Date is in a month/day/year numeric format with 2 digits each for month and day and 4 digits for year. (MM/DD/YYYY) for example: 03/20/1998. You may change each segment of the date separately. Move between the segments with the [Tab] key and/or [Shift] + [Tab] keys. 4

System Date:

Primary Master:
Options Selects Primary Master submenu Selects Secondary Master submenu
The product # of the Hard Drive
Display the type of device on this ATA/ATAPI interface, if there is one. Pressing the Enter key selects the Primary Master submenu allowing additional device configuration options for this interface. Display the type of device on this ATA/ATAPI interface, if there is one. Pressing the Enter key selects the Secondary Master submenu allowing additional device configuration options for this interface. The default setting differs between the US/European and the Japanese model. Selects the display language for the BIOS.

Secondary Master:

[None]

Language:

English (US) Japanese (JP)

[English (US)]

Primary Master Submenu of the Main Menu
The Primary Master submenu identifies what ATA devices are installed. Note that actual hard drive label shown may vary. Depending on the drive type, information such as cylinders, heads and sectors may also be displayed.
PhoenixBIOS Setup Utility Main Primary Master [TOSHIBA MK4025GAS-(PM)] Item Specific Help
Type: Total Sectors: Maximum Capacity:
[Auto] LBA Format 78140160 40008MB [16 Sectors] [Enabled] [Multiword DMA 2] [Disabled]
Select ATA/ATAPI drive installed here. [Auto] The BIOS auto-types the drive on boot time. Except [Auto] You enter parameters of the drive. [None] The drive is disabled.
Multi-Sector Transfers: LBA Mode Control: Transfer Mode: Ultra DMA Mode:
Figure 2. Primary Master Submenu

[Auto]

Selects the ATA/ATAPI device type. Select Auto to have the type automatically identified by the BIOS at POST. If None is selected, all of the following Set-up items do not appear. Select CD-ROM if a CD-ROM drive is installed at this connection. If Hard Disk is selected, you must specify the number of Cylinders, Heads, and Sectors for the drive. Logical Block Addressing (LBA)
Auto None CD-ROM Hard Disk
LBA Format Total Sectors: Maximum Capacity: CHS Format Cylinders:

The total number of sectors on your hard disk The maximum capacity of your hard disk
Cylinders/Heads/Sectors A number between 0 and 65,535 This item is active only when Hard Disk is selected as the type. This field is changed by incrementing (pressing the [Spacebar]) or by typing in the number.

Heads:

This item is active only when Hard Disk is selected as type. You can change the value by incrementing (pressing the [Spacebar]) or by typing in the number. This item is active only when Hard Disk is selected as type. You can change the value by incrementing (pressing the [Spacebar]) or by typing in the number. Displays the maximum capacity of the drive calculated from the parameters of the hard disk when Auto is selected and the type is identified as hard disk. This option cannot be changed when Auto is selected. Specify the number of sectors per block for multiple sector transfer.
A number between 1 and 16

Sectors:

A number between 0 and 63

Maximum Capacity:

Display only

Multi-Sector Transfers:

Disabled 2 Sectors 4 Sectors 8 Sectors 16 Sectors Disabled Enabled Standard Fast PIO 1 Fast PIO 2 Fast PIO 3 Fast PIO 4 Multiword DMA 1 Multiword DMA 2 Disabled Mode 0 Mode 1 Mode 2 Mode 3 Mode 4 Mode 5

[16 Sectors]

LBA Mode Control:

[Enabled]

Enables or disables logical Block Addressing in place of Cylinder, Head, Sector addressing. This option cannot be changed when Auto is selected. Selects the method for moving data to/from the drive. Autotype the drive to select the optimum transfer mode. This option cannot be changed when Auto is selected.

Transfer Mode:

[Multiword DMA 2]

Ultra DMA Mode:

[Disabled]
Selects the method for moving data to/from the drive. Autotype the drive to select the optimum transfer mode. This option cannot be changed when Auto is selected.
A bootable CD-ROM may have either a floppy disk or hard drive format. When the bootable CD-ROM is used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk format CD-ROM is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: designation if a formatted internal hard drive is present since the C: designator is always reserved for the internal hard drive.The boot sequence ignores the new drive designations, however, your application software will use the new designations. Be aware of the operating environment when booting from a CD-ROM or you may overwrite files by mistake.

Secondary Master Submenu of the Main Menu
The Secondary Master submenu is for the internal CDROM drive. The drive type is displayed on this menu as well as the Main menu. Your notebook auto-senses the characteristics of the internal drive installed. You will not need to modify these settings; they are displayed for your reference. Note that actual drive labels shown may vary.
PhoenixBIOS Setup Utility Main Secondary Master [TOSHIBA DVD-ROM SD-R2412-(SM)] Item Specific Help
Type: Multi-Sector Transfers: LBA Mode Control: Transfer Mode: Ultra DMA Mode:
[Auto] [Disabled] [Disabled] [Standard] [Disabled]
Figure 3. Secondary Master Submenu
Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu
Selects the ATA/ATAPI device type. Select Auto to have the type automatically identified by the BIOS at POST. If None is selected, all of the following Set-up items do not appear. Select CD-ROM or Hard Disk for appropriate drive type installed at this connection. This option cannot be changed when Auto is selected. Specify the number of sectors per block for multiple sector transfer.
Auto None CD-ROM Hard Disk Disabled 2 Sectors 4 Sectors 8 Sectors 16 Sectors Disabled Enabled
Enables or disables Logical Block Addressing in place of Cylinder, Head, Sector addressing. This option cannot be changed when Auto is selected.

[Standard]

Standard Fast PIO 1 Fast PIO 2 Fast PIO 3 Fast PIO 4 Multiword DMA 1 Multiword DMA 2 Disabled Mode 0 Mode 1 Mode 2 Mode 3 Mode 4 Mode 5
Exiting from Main Menu When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu or to move to another menu.
ADVANCED MENU SETTING DEVICE FEATURE CONTROLS
The Advanced Menu allows you to: Set the I/O addresses for the serial and parallel ports. Set the features of the keyboard/mouse. Select between the display panel and/or an external CRT display. Set internal device configurations Configure USB and CPU features. Configure miscellaneous features such as Wake Up On LAN. Configure DMI Event Logging. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating Through the Setup Utility on page 2 for more information) The following tables show the names of the menu fields for the Advanced Menu and its submenus, all of the options for each field, the default settings and a description of the fields function, and any special information needed to help understand the fields use.

Keyboard/Mouse Features Video Features Internal Device Configurations CPU Features USB Features Miscellaneous Configurations Event Logging
Configures serial ports and parallel ports

Figure 4. Advanced Menu

Advanced Menu
Table 4: Fields, Options and Defaults for the Advanced Menu

Menu Field Description

Keyboard/Mouse Features Video Features
When selected, opens the Keyboard/Mouse Features submenu, which allows setting external and internal keyboard and mouse parameters. When selected, opens the Video Features submenu, which allows setting of the display parameters, including routing of video signals to different displays. When selected, opens the Internal Device Configuration submenu, which allows enabling or disabling the modem, IDE, and LAN Controllers. When selected, opens the CPU Features submenu, which allows you to change the Intel(R) SpeedStep(R) Technology settings. Configures USB features. Configures miscellaneous features, such as Wake Up On LAN and Power Button.
Internal Device Configurations CPU Features
USB Features Miscellaneous Configurations Event Logging
When selected, opens the event logging submenu.
Keyboard/Mouse Features Submenu of the Advanced Menu
The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and keyboard.
PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help

Keyboard/Mouse Features

Numlock:
Selects power-on state for Numlock.
Figure 6. Keyboard/Mouse Features Submenu
Table 6: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu
Sets the NumLock function state when the computer completes booting.
Auto On Off On/Padlock Off
Video Features Submenu of the Advanced Menu
The Video Features Submenu is for setting the display parameters.

Video Features

Display: Compensation:

[Auto] [Enabled]

Select display terminal. * This setting is not effective after operating system starts up.
Figure 7. Video Features Submenu
Table 7: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu

Display:

Selects where the video signal will be routed.
Internal Flat Panel External (Analog) External (Digital) Auto Disabled Enabled

Compensation:

Enables or disables display compensation.

[Disabled] The feature is disabled. [Enabled] Legacy USB Emulation is enabled and USB devices are available without USB aware OS.
Figure 10. USB Features Submenu
Table 10: Fields, Options and Defaults for the ACPI Features Submenu of the Advanced Menu

Legacy USB Support:

When Disabled is selected, legacy USB emulation is disabled. When Enabled is selected, legacy USB emulation is enabled and USB devices are available without USB-aware OS. When Enabled is selected, USB devices that belong to the SCSI subclass in the mass storage class (e.g., USB Memory Key) are enabled.

SCSI SubClass Support:

Miscellaneous Configurations Submenu of the Advanced Menu
The Miscellaneous Configurations Submenu configures the miscellaneous features for your system.
Miscellaneous Configurations
Power Button: Wake up on LAN: Volume Setting:
[Disabled] [Disabled] [Middle]
Configures the power button. *ACPI OS ignores this setting.
Figure 11. Miscellaneous Configurations Submenu
Table 11: Fields, Options and Defaults for the Miscellaneous Configurations Submenu

Power Button:

[DIsabled]
When Disabled is selected, the power button does not respond to a press. When Power Off is selected, the button turns the power off. When Enabled is selected, the system will wake up when the internal LAN device receives a Magic Packet while the system is powered off. Allows you to set or disable the system volume level.
Disabled Power Off Disabled Enabled Off Minimum Middle Maximum

Wake up on LAN:

Volume Setting:

[Middle]

Event Logging Submenu of the Advanced Menu
The Event Logging Submenu configures event logging features for DMI events.

Event Logging

Event Log Capacity: Event Log Validity: View Event Log: Event Logging: System Boot Event: Clear All Event Logs: Mark Events as Read:
Space Available Valid [Enter] [Enabled] [Disabled] [No] [Enter]
Press <Enter> key to view the contents of the event log.
Figure 12. Event Logging Submenu
Table 12: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu
Event Log Capacity: Event Log Validity: View Event Log: Event Logging:

Space Available

Display only.
Valid Enter Disabled Enabled Disabled Enabled No Yes Enter [Enter] [Enabled]

Clear Clear [Enter] [Enter] [0] [Disabled] [Disabled] [Disabled] [All] [Enabled] Press <Enter> key to set Supervisor Password to enable any password features. Then password entry is required to enter BIOS Setup.
Hard Disk Security Owner Information Security Panel On Resume: [Enabled]

Figure 13. Security Menu

Table 13: Fields, Options and Defaults for the Security Menu
Supervisor Password is: User Password is:
A display-only field. Set is displayed when the system Supervisor Password is set and Clear when it is not. A display-only field. Set is displayed when the general User Password is set, and Clear when it is not. Sets, changes or cancels Supervisor Password. The Supervisor Password may be up to seven characters long and include only letters or numbers (no symbols). Passwords are NOT case- sensitive. To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a Supervisor Password is set it must be used to access the BIOS setup utility. This field can only be accessed if the Supervisor Password is set. Sets, changes or cancels the User Password. The User Password may be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a User Password is set it must be used to access the BIOS setup utility. Sets the minimum length for User Password.

Set Supervisor Password

Set User Password
Minimum User Password Length: Password on Boot:
Disabled First Boot Every Boot
When Enabled, a password (User or Supervisor) is required after the Power On Self Test (POST) before the operating system will be read from a disk. When set to Disabled no password is required. If no Supervisor Password is set this feature is not available and no password is required. This field is active only when Password On Boot is set to First Boot or Every Boot. When disabled, password entry is not required on automatic wake up on LAN or Real Time Clock. When enabled, the password is still required on automatic wake up. When set to Enabled, the PS/2 keyboard and mouse inputs are locked out upon Suspend from Resume or Save-to-Disk mode until the password is entered. When both passwords are set, the User password is always used to lock. Password entry before OS boot is disabled upon unattended boot. Enable password allows supervisor access only.

On Automatic Wake up:

KB Lock on Resume:
Boot from Removable Media: Flash Write:
All Supervisor only Disabled Enabled
When disabled, the BIOS Flash memory is write protected.

Hard Disk Security:

When selected, opens the Hard Disk Security submenu, which allows you to configure hard disk security features. When selected, opens the Owner Information submenu, which allows you to set Owner information. Allows the Security Panel Feature to be enabled or disabled upon Suspend from Resume.
Owner Information: Security Panel On Resume
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security Submenu is for configuring hard disk security features.

Hard Disk Security

Primary Master Password Is: Secondary Master Password Is: Set Primary Master Password Set Secondary Master Password Password Entry on Boot:
Clear Not Available [Enabled] [Enter] [Enabled]
Press <Enter> key to set Hard Disk Password. The hard disk is locked with the password. Data in the locked disk can not be read on other systems.
Figure 14. Hard Disk Security Submenu
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Primary Master Password Is:: Secondary Master Password Is: Set Primary Master Password
A display-only field. Set is displayed when the Master Password is set and Clear when it is not. A display-only field. Not Available is displayed.
Sets, changes or cancels Primary Master Password. The Primary Master Password may be up to seven characters long and include only letters or numbers (no symbols). Passwords are NOT case- sensitive. To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a Primary Master Password is set it must be used to access the hard disk. Data on the hard disk cannot be read on other systems. Not currently available.
Set Secondary Master Password Password Entry on Boot:
When this is disabled, it is not necessary to enter the Hard Disk Password before booting.The hard disk is still password-protected without entering a password.
Owner Information Submenu of the Security Menu
The Owner Information Submenu is for setting owner information. Note that Owner Information cannot be set without having entered a supervisors password.

Owner Information

Owner Information Is: Set Owner Information Foreground Color: Background Color:
Clear [Enter] [Gray] [Black]
Press <Enter> key to set owner information. Up to 80 characters can be set. Available characters are ASCII codes from 32 through 126. The owner information is always displayed at the bottom line of the screen during POST.
Figure 15. Owner Information Submenu
Table 15: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu
Owner Information Is: Set Owner Information: Foreground Color:
Field to write owner information, e.g., your name. Set foreground color.
Black Blue Green Cyan Black Blue Green Cyan

Red Magenta Brown White Red Magenta Brown White
Gray Light Blue Light Green Light Cyan Gray Light Blue Light Green Light Cyan
Light Red Light Magenta Yellow Bright White Light Red Light Magenta Yellow Bright White

[Gray]

Background Color:

[Black]

Sets background color.
Exiting from the Security Menu
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to another menu, use the cursor keys.

Boot Menu

BOOT MENU SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the BIOS searches sources for the operating system. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating Through the Setup Utility on page 2 for more information) The following tables show the names of the menu fields for the Boot menu and its submenu, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use.
PhoenixBIOS Setup Utility Security Boot Info Exit Item Specific Help
Quick Boot: Boot Time Diagnostic Screen: Boot Menu: Preboot Execution Environment: Boot Device Priority
[Enabled] [Disabled] [Enabled] [Disabled]
[Disabled] All diagnostic tests will be done. [Enabled] Some diagnostic tests may be skipped while booting to speed up.
Table 16: Fields, Options and Defaults for the Boot Menu

Quick Boot:

Boot Time Diagnostic Screen: Boot Menu:
Preboot Execution Environment: Boot Device Priority:
Select Item -/Space Change Values Select Sub-Menu Select Menu Enter

Figure 16. Boot Menu

Turns on and off booting with a truncated set of Power On Self Tests. (Fewer tests mean faster turn on.) Turns on and off display of test results instead of Fujitsu logo screen during Power On Self Test. When disabled, the boot menu is disabled and the F12 key is ignored. When enabled, the boot menu is enabled. Turns on and off boot from network server options.
Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled
Selects the Boot Device Priority submenu
This menu allows setting up the source for the operating system. See Boot Device Priority Submenu in the following section.
The Boot Device Priority Submenu of the Boot Menu
The Boot Device Priority Submenu is for setting the order of checking of sources for the operating system.
Be aware of the operating environment when booting from a CD-ROM or you may overwrite files by mistake.

PhoenixBIOS Setup Utility Security Power Savings Boot Item Specific Help

Boot Device Priority

+Floppy Disk Drive +Hard Disk Drive CD-ROM Drive
Keys used to view or configure devices: <Enter> expands or collapses devices with a + or -. <Ctrl+Enter> expands all. <Shift+1> enables or disables a device. <+>/<Space> or <-> moves the device up or down. <d> removes a device that is not installed.
Figure 17. Boot Device Priority Submenu
Table 17: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
The boot selections determine the order in which the BIOS searches for the operating system during a startup sequence. To change the order highlight one source by using the [up] or [down] cursor keys and then press the [+] or [-] key to change the order number for that source. Be sure to save your changed order when you exit the BIOS setup utility.
Exiting from Boot Menu When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit menu. If you wish to move to another menu, use the cursor keys.

Exit Menu

INFO MENU DISPLAYS BASIC SYSTEM INFORMATION
The Info menu is a display only screens that provides the configuration information for your notebook. The following table shows the names of the menu fields for the Info menu and the information displayed in those fields. These fields are for information purposes only, and are not editable.
The information, including CPU type and speed, and total memory, displayed on this screen varies according to the unit you purchased.
BIOS Version: BIOS Date: BIOS Area: CPU Type: CPU Speed: L1 Cache: L2 Cache:
1.03 02/23/2003 E000h - FFFFh Intel(R) Pentium(R) M 1.7 GHz 64 KB 1024 KB
Total Memory: 512 MB Memory Slot 1: None Memory Slot 2: 512 MB DDR SDRAM

Figure 18. Info Menu

F9 F10
Setup Defaults Save and Exit
Table 18: Fields, Options and Defaults for the Info Menu Note that the parameters listed in the following table may be different, depending upon your system configuration.
BIOS Version: BIOS Date: BIOS Area: CPU Type: CPU Speed: 1.03 02/23/2004 E000h FFFFh Intel(R) Pentium(R) M 1.70 HGz
L1 Cache:: L2 Cache: Total Memory: Memory Slot 1: Memory Slot 2: 64 KB 1024 KB 512 MB None

512 MB DDR SDRAM

Exit Discarding Changes Load Setup Defaults

Discard Changes

Save Changes