Hercules DJ Console Rmx troubleshooting - Version 1.0
1) On my PC, I get a message Power Surge on USB port when I plug DJ Console Rmx and the console doesnt boot Please: - unplug your headphones and microphone from DJ Console Rmx, - connect DJ Console Rmx on the USB bus before booting the computer, and switch ON the computer once DJ Console Rmx is already connected on its USB port, - wait until Windows has booted, and DJ Console Rmx is detected (so that the DJ logo on right of the task bar has no longer a red cross), then you can plug your headphones and microphone on DJ Console Rmx. In case booting in that way is not sufficient, then the power on the USB bus of your laptop may be too low for DJ Console Rmx, so you must add between the Hercules device and the computer USB port a USB hub with a dedicated power adapter, which will power the USB bus. 2) On my Mac, I get a message USB Over Current Notice when I plug my DJ Console Rmx (Dont connect DJ Console Rmx to the USB port on Mac keyboards, this port is not powered enough for audio devices). Please: - unplug your headphones and microphone from DJ Console Rmx, - connect DJ Console Rmx on the USB bus before booting the computer, and switch ON the computer once DJ Console Rmx is already connected on its USB port, - wait until your Mac has booted, and DJ Console Rmx is detected, and then you can plug your headphones and microphone on DJ Console Rmx. If your MacBook still lacks power on its USB port, you may have to reset the system management setting on your MacBook (http://docs.info.apple.com/article.html?artnum=303319). If you use Mac OS 10.5.1 or Mac OS 10.5.2, updating your OS to Mac OS 10.5.3 may also restore the power on the USB port http://support.apple.com/kb/HT1141. This update also suppress noise, if any, in the audio outputs. 3) My DJ Console Rmx audio playback is not satisfactorily in Windows, I hear glitches in the sound track, whatever the ASIO latency setting I select If your DJ Console Rmx is connected directly to your computer USB port, the problem may appear due to an energy saving mode setting in your USB root hub. Therefore we recommend checking the power settings for your USB devices: Open the Device Manager: click Start/Run and enter the following command: devmgmt.msc Click the <+> sign to the left of Universal Serial Bus controllers Double-click USB Root Hub and select the Power Management tab Uncheck Allow the computer to turn off this device to save power Validate your choice by clicking OK
After you have made this change for all <USB Root Hub> entries and restart your computer
4) When I run VirtualDJ DJC 5, I get an error message Cannot find ASIO driver Please check you have properly installed the ASIO driver of DJ Console Rmx. You can check it by clicking on Start Button > Settings > Control Panel > System > Hardware > Device Manager and, in the Hercules DJ Devices part, there is a Hercules DJ Console Rmx ASIO driver. Right clicking on this driver and selecting Properties says if the device is working. 5) When I run VirtualDJ Pro 5.0.7, DJ Console Rmx doesn't control the software You must go to the configuration menu, and in the Remote menu, select the DJ Console Mk2 icon to select DJ Console Rmx as controller for VirtualDJ Pro. In Mac OS version, you must update to an upper version of VirtualDJ Pro 5, as VirtualDJ Pro 5.0.9, downloadable on http://www.virtualDJ.com, to use DJ Console Rmx as controller for VirtualDJ Pro 5. Future versions of VirtualDJ Pro will include a DJ Console Rmx icon among the remote controllers. 6) When I load a music track on VirtualDJ DJC 5 in Windows, it takes all the CPU resources of my PC so that my actions on DJ Console Rmx are not taken into account in real time as long as the track is not entirely loaded. You must update DJ Console Rmx driver to the driver package 2-HDJS-2008 or upper version. 7) With Traktor 3 DJ Studio on my Mac computer, DJ Console Rmx which previously controlled the software no longer controls anything, but the audio works. Please plug DJ Console Rmx on the USB port on which you originally installed it 8) On my Mac, DJ Console Rmx controls the software VirtualDJ DJC 5.0.7 but I get no sound in DJ Console Rmx outputs It means that you have set DJ Console Rmx as default audio output of your Mac. With VirtualDJ DJC 5.0.7, you must restore the Mac integrated audio output as default audio output for Mac OS. This will restore the sound on DJ Console Rmx in VirtualDJ DJC 5.0.7. Go in Apple Menu > System Preferences > Hardware: Sound > Output> and at the question Choose the device for sound output , select the answer Internal Speakers Built-in Output instead of DJ Console Rmx output. 9) On my Mac, when I switch VirtualDJ DJC 5.0.7 in full screen, it clears the browsing area so that I no longer see the files list or directories, and the fader buttons disappear on screen. You will restore the display of the browsing area by placing the cursor on each side of this area (by pushing on DJ Console Rmx Right and Left buttons). Moving each fader on DJ Console Rmx will display its position on VirtualDJ skin.

10) On my Mac in Mac OS 10.5, when I activate an external audio source, I sometimes get a noise over the music source This issue should be fixed in the following versions, as VirtualDJ DJC 5.1.
11) In Sampler-Rec mode, the length of the sample doesn't fit with how long I push down the Sampler-Rec button The default length of the sample with the Sampler-Rec button is 4-beat, it doesn't depend of how long you push down the Sampler-Rec button. To save another length for the sample, enter in loop mode, then push down the sampler-Rec button, and it saves the entire loop as sample.
12) I don't find where I can record my mix in VirtualDJ DJC 5 VirtualDJ DJC 5 doesn't include the record of mixes: you need VirtualDJ Pro 5 to record mixes.
13) On my Mac, I don't see how to change or choose the MP3 tags in VirtualDJ DJC 5 You can access the MP3 tags in VirtualDJ by placing the mouse on the music browser headline (and on the files) and then pressing Ctrl and the mouse click button. 14) My DJ Console Rmx seems faulty, where should I return it? Pease contact Hercules Technical Support prior to returning a DJ Console Rmx, since returning a fully working console will not help as the DJ Console Rmx you will get in exchange will not work better if what you need is a change in your computer settings. You can contact Hercules Technical Support at: - by email, on http://ts.hercules.com/eng/index.php?pg=email - by phone, at the numbers listed on http://ts.hercules.com/eng/index.php?pg=contact

Configuring Traktor 3 for the DJ Console Rmx (Windows version)
1- Configuration of the ASIO driver/ MIDI channel
a) From the DJ Console control panel, set the audio mode to ASIO b) Click the ASIO tab and configure the various driver settings to be used by Traktor. NOTE: These settings cannot be modified once Traktor has been launched.
c) Next, go to the ADVANCED tab, and make sure that MIDI channel is set to 1. This is very important as the TKS file provided is configured for the DJ Console Rmx to work on this channel. If you have multiple MIDI controllers, or would like to use the DJ Console on a different MIDI channel, you will need to mofidy the TKS file accordingly. Consult Traktors user manual for more details.
2- Audio configuration in Traktor
a) From the FILE menu, select AUDIO SETUP b) In Soundcard, select Hercules DJ Console Rmx ASIO as Audio Device. Notice that the SAMPLE RATE and AUDIO LATENCY should reflect the configuration previously made in the Control panel
c) Under Output Routing, set Output 3 & 4 for Monitor and Output 1 & 2 for Master
d) If you are using external sources, in Input Routing, select the DJ Console inputs for channels A&B.
3- Configuration of the Midi controllers in Traktor
a. Expand Hotkey and MIDI setup and select MIDI Interface. Make sure Hercules DJ Console Rmx MIDI is marked with an X in the ACTIVE column for both MIDI IN and OUT.
b. From MIDI Setup, click the Load button. Locate and select the TKS file, then press OK
c. Traktor is now configured to use the DJ Console Rmx.
MIDI Layout for the DJ Console Rmx and Traktor3
NOTE: The terms used are those employed in Traktor

Main Configuration:

A- Deck Input Select B- Deck Gain C- EQ (Bass/ Mid/ Treble) and EQ Kill D- Master Balance E- Deck Tempo - Reset F- Deck Time Stretch ON G- Loop: Buttons 1 / 4: Loop Set/In, Loop Active/Out Buttons 2 / 5: Loop Length Increase/Decrease Buttons 3 / 6: Loop Move Backward / Forward H- Deck Tempo I- Deck Skip Backward / Forward J- Deck Monitor Cue K- Deck Load Selected L- Browser List Select Up/Down M- Deck Tempo - Sync N- Deck Scratch / CD-DJ Jogg O- Deck Volume P- Master Volume Q- Deck Cue/Pause R- Deck Scratch Jogg ON (HOLD to activate scratch on decks jog wheel) S- Deck Play/Pause T- X-Fader
Secondary functions: Press and hold the SCRATCH button to access the secondary functions
A- Deck Pitch Bend B- FX: Buttons 1 / 4: Effect Select Previous/ Next Buttons 2 / 5: Effect button 1 /2 Buttons 3 / 6: Effect button 3 /4
C- Jump Cue- List 1, 2, 3 (top to bottom) D- Browser Tree Up/ Down / Expand /Collapse E- Deck Jump Backward/Forward F- Deck Cue Set G- Lock Cue Point H- Effect Knob 1 / 2

Midi controllers map