QuickSpecs

Overview
HP Compaq nc6120 Notebook PC

1. 2. 3. 4. 5. 6.

Volume Mute Button with LED Volume Down Button Volume Up Button 6-in-1 Media Reader Stereo Speakers Touchpad with Scroll Zone (or Pointstick, not pictured) 7. Hard Drive Activity LED 8. Battery Charging LED 9. Power/Standby LED 10. Wireless On/Off LED 11. Fast Infrared Port
12. 13. 14. 15. 16 17. 18. 19. 20. 21. 22.
PC Card Eject Button PC Card Slots (and optional Smart Card Reader) IEEE 1394 Port RJ-45 Port (NIC) RJ-11 Port (Modem) VGA/External Monitor Connector 2 USB 2.0 Ports Power Button with LED HP Info Center Button Wireless On/Off Button with LED Presentation Mode Button

DA - 12136

North America Version 26 September 6, 2006

Page 1

1. 2. 3. 4. 5.
Headphone Jack Microphone Jack 2 USB 2.0 Ports Optical Drive Optical Drive Button

6. 7. 8. 9. 10.

Serial Port Kensington Lock Slot DC Power Connector Parallel Port S-Video TV Out

At A Glance

Genuine Windows XP Professional, Genuine Windows XP Home Edition (select countries), or FreeDOS Intel Pentium M processors 730 to 770* or Intel Celeron M processors 360J to 370* Sleek industrial design starting at 6.06 lb/2.75 kg and 1.2-inch/30.3 mm thin at front Mobile Intel 915GM Express Chipset 256-MB DDR SDRAM, upgradeable to 2048-MB maximum Up to 100-GB 5400 rpm hard drive Intel Graphics Media Accelerator 900 Optional Integrated 802.11a/b/g or 802.11b/g wireless LAN module Support for optional Intel Centrino mobile technology Optional integrated Bluetooth 6-in-1 Media Reader NetXtreme Gigabit Ethernet Controller Choice of Touchpad with scroll zone or Pointstick Protected by three-year standard parts and labor warranty - certain restrictions and exclusions apply *Intel's numbering system is not a measurement of performance.

Page 2

What's Special
Security features: HP ProtectTools HP Drivelock Smart Card Reader (optional) Kensington lock slot Ease of use features HP Mobile Print Driver for on-the-go printing HP Wireless Assistant HP Info Center HP Fast Charge technology Up to 4 hours of battery life Integrated reliability features: HP Mobile Data Protection System HP Panel Protection System Scratch-resistant keyboard using In-mold Lamination Support for new HP docking solutions and HP Travel Battery.

Page 3

Standard Features

Processors

Intel Pentium M processor 770* (2.13-GHz, 533-MHz FSB, 2-MB L2 cache) Intel Pentium M processor 760* (2.0-GHz, 533-MHz FSB, 2-MB L2 cache) Intel Pentium M processor 750* (1.86-GHz, 533-MHz FSB, 2-MB L2 cache) Intel Pentium M processor 740* (1.73-GHz, 533-MHz FSB, 2-MB L2 cache) Intel Pentium M processor 730* (1.6-GHz, 533-MHz FSB, 2-MB L2 cache) Intel Celeron M processor 370* (1.5-GHz, 400-MHz FSB, 1-MB L2 cache) Intel Celeron M processor 360J* (1.4-GHz, 400-MHz FSB, 1-MB L2 cache) * Intel's numbering is not a measurement of higher performance. NOTE: Intel Pentium M processors support enhanced Intel SpeedStep technology. Processor speed denotes maximum performance mode; Intel Pentium M processors will run at approximately 800 MHz in battery optimization mode.

Operating System

Preinstalled
Supported Certified Windows Vista Capable
Genuine Windows XP Professional SP2 Genuine Windows XP Home Edition SP2 (select countries only) FreeDOS Genuine Windows 2000 (drivers downloadable from http://www.hp.com) Novell Linux Desktop 9 Not all Windows Vista features are available for use on all Windows Vista Capable PCs. All Windows Vista Capable PCs will run the core experiences of Windows Vista, such as innovations in organizing and finding information, security, and reliability. Some features available in premium editions of Windows Vista -- like the new Windows Aero user interface -- require advanced or additional hardware. Check http://www.windowsvista.com/getready for details.

Chipset

Mobile Intel 915GM Express Chipset

Graphics

Intel Graphics Media Accelerator 900 with up to 128-MB shared system memory

Display

Internal

External

14.1-inch or 15.0-inch XGA (1024 x 768 resolution and 16 M colors) 15.0-inch XGA BrightView (1024 x 768 resolution and 16 M colors) 15.0-inch SXGA+ (1400 x 1050 resolution and 16 M colors) Up to 32-bit per pixel color depth Supports 640 x 480, 800 x 600, 1024 x 768, 1280 x 768, 1280 x 1024, or 1600 x 1200 resolutions up to 100-Hz refresh rate, dependent upon monitor capability, and resolution and color depth settings

Page 4

Memory
256-MB, 512-MB, or 1024-MB 333-MHz DDR SDRAM; two SODIMM slots Standard Upgradeable to 2048-MB maximum (1024-MB SODIMM in slots 1 and 2) Maximum NOTE: Due to the non-industry standard nature of some third-party memory modules, we recommend HP branded memory to ensure compatibility. If you mix memory speeds, the system will perform at the lower memory speed.

Communications

NetXtreme Gigabit Ethernet Controller (10/100/1000 NIC)* 56K modem** with digital line guard * The term "10/100/1000" or "Gigabit" Ethernet indicates compliance with IEEE standard 802.3ab for Gigabit Ethernet, and does not connote actual operating speed of 1 Gb/s. For high-speed transmission, connection to a Gigabit Ethernet server and network infrastructure is required. ** Designed for downloads from 56K modem compliant sources. Maximum achievable download transmission rates currently do not reach 56 KB/s, and will vary with line conditions. Modem availability is subject to country regulatory approval.

Wireless Devices

Support for a broad range of secure, integrated wireless LAN options. Integrated Bluetooth is also an option (factory configurable only) and can be combined with any one of the supported wireless LAN options. Wi-Fi certified All integrated wireless Cisco Compatible Extensions support (Version 3.0) LAN options Wired Equivalent Privacy (WEP) support up to 128-bit keys Wi-Fi Protected Access (WPA) and WPA2 support 802.1x authentication support, including EAP-TLS, EAP-TTLS, PEAP-GTC, PEAP-MSCHAPv2, and LEAP Advanced Encryption Standard (AES) support WiFi certified for WPA2, WMM Dual antennas integrated in the display enclosure Integrated support for 802.11 b and g Broadcom 802.11b/g Up to 54-mbps data rate WLAN Broadcom 802.11a/b/g Integrated support for 802.11a, b and g Up to 54-mbps data rate WLAN Intel Centrino mobile technology Intel PRO/Wireless Integrated support for 802.11b and g 2200BG 802.11 b/g Up to 54-mbps data rate WLAN Intel Centrino mobile technology Intel PRO/Wireless 2915ABG 802.11 a/b/g Integrated support for 802.11a, b and g Up to 54-mbps data rate WLAN Bluetooth Specification v1.2 compliant Integrated Bluetooth Works with a wide range of Bluetooth devices

Page 11

nc6120 PZ513UA#ABA Processor Operating System System Memory Hard Drive Display
Intel Pentium M processor 750* (1.86-GHz, 533-MHz FSB, 2-MB L2 cache) Genuine Windows XP Professional 512-MB 333-MHz DDR SDRAM (512-MB SODIMM in slot 1) 60-GB 5400 rpm 15.0-inch TFT SXGA+ with 1400 x 1050 resolution (up to 16.7 M colors internal) Intel Graphics Media Accelerator 900 Graphics Up to 128 MB of shared system memory Video Memory ADI AC '97 CODEC, Line out/headphone and microphone jacks Audio 24X DVD/CDRW Combo Optical Drive 56K Fax/Modem, Communications Integrated NetXtreme Gigabit Ethernet Controller (10/100/1000 NIC) Intel PRO/Wireless 2915ABG 802.11a/b/g WLAN Integrated Wireless Touchpad with scroll zone Pointing Device 6-cell high capacity Lithium-Ion (52Wh) Battery External 65W adapter Power 3/3/0 Warranty** * Intel's numbering system is not a measurement of performance. ** Certain restrictions and exclusions apply.
nc6120 PZ121UA#ABA Smart Buy
Intel Pentium M processor 740* (1.7-GHz, 533-MHz FSB, 2-MB L2 cache) Genuine Windows XP Professional 512-MB 333-MHz DDR SDRAM (512-MB SODIMM in slot 1) 40-GB 5400 rpm 15.0-inch TFT XGA with 1024 x 768 resolution (up to 16.7 M colors internal) Intel Graphics Media Accelerator 900 Graphics Up to 128 MB of shared system memory Video Memory ADI AC '97 CODEC, Line out/headphone and microphone jacks Audio 24X DVD/CDRW Combo Optical Drive 56K Fax/Modem, Communications Integrated NetXtreme Gigabit Ethernet Controller (10/100/1000 NIC) Intel PRO/Wireless 2200BG 802.11b/g WLAN Integrated Wireless Touchpad with scroll zone Pointing Device 6-cell high capacity Lithium-Ion (52Wh) Battery External 65W adapter Power 3/3/0 Warranty** * Intel's numbering system is not a measurement of performance. ** Certain restrictions and exclusions apply.

Page 12

nc6120 EK719AA#ABA Processor Operating System System Memory Hard Drive Display
Intel Pentium M processor 760* (2.0-GHz, 533-MHz FSB, 2-MB L2 cache) Genuine Windows XP Professional 512-MB 333-MHz DDR SDRAM (512-MB SODIMM in slot 1) 60-GB 5400 rpm 15.0-inch TFT SXGA+ with 1024 x 768 resolution (up to 16.7 M colors internal) Intel Graphics Media Accelerator 900 Graphics Up to 128 MB of shared system memory Video Memory ADI AC '97 CODEC, Line out/headphone and microphone jacks Audio 24X DVD/CDRW Combo Optical Drive 56K Fax/Modem, Communications Integrated NetXtreme Gigabit Ethernet Controller (10/100/1000 NIC) Intel Pro Wireless 2200BG 802.11b/g WAN Integrated Wireless Bluetooth Touchpad with scroll zone Pointing Device 6-cell high capacity Lithium-Ion (52Wh) Battery External 65W adapter Power 3/3/0 Warranty** * Intel's numbering system is not a measurement of performance. ** Certain restrictions and exclusions apply.

nc6120 EK721AA#ABA

Intel Pentium M processor 750* (1.86-GHz, 533-MHz FSB, 2-MB L2 cache) Genuine Windows XP Professional 256-MB 333-MHz DDR SDRAM (256-MB SODIMM in slot 1) 40-GB 5400 rpm 15.0-inch TFT XGA with 1024 x 768 resolution (up to 16.7 M colors internal) Intel Graphics Media Accelerator 900 Graphics Up to 128 MB of shared system memory Video Memory ADI AC '97 CODEC, Line out/headphone and microphone jacks Audio DVD-ROM Drive Optical Drive 56K Fax/Modem, Communications Integrated NetXtreme Gigabit Ethernet Controller (10/100/1000 NIC) None Integrated Wireless Touchpad with scroll zone Pointing Device 6-cell high capacity Lithium-Ion (52Wh) Battery External 65W adapter Power 3/3/0 Warranty** * Intel's numbering system is not a measurement of performance. ** Certain restrictions and exclusions apply.

Page 13

Options
Memory 256-MB 333-MHz DDR SDRAM 512-MB 333-MHz DDR SDRAM 1024-MB 333-MHz DDR SDRAM

DC389B DC390B DC890B

60-GB 5400 rpm Primary Hard Drive USB Diskette Drive HP USB Digital Drive + 128-MB Secure Digital Card HP 40-GB Mobile USB Hard Drive
PA852A DC361B DL702A DQ549A
MultiBay II Storage (9.5-mm) NOTE: Requires HP Docking Station or HP Advanced Docking Station
8X DVD-ROM MultiBay II Drive 24X Combo DVD/CD-RW MultiBay II Drive 2X DVD+/-RW Dual Format MultiBay II Drive 80-GB 5400 rpm MultiBay II Hard Drive
PA849A PA850A PA851A PH357A
Intel PRO/Wireless 2200BG 802.11b/g WLAN option kit

PF952AA#ABA

Expansion Solutions
HP Docking Station HP Advanced Docking Station HP 3-in-1 NAS Docking Station HP Monitor Stand HP Adjustable Notebook Stand HP 4-port USB 2.0 Hub
PA286A#ABA PA287A#ABA EM537AA#ABA PA507A PA508A DG954A
HP 2-bay Battery Charging Station HP 10-bay Battery Charging Station Battery Adapter kit #1 65W AC Adapter 90W AC Adapter 90W Auto Adapter 90W Air/Auto/AC Combo Adapter 90W Aircraft Cables Primary 6-cell Battery Pack HP Travel Battery
DT533A#ABA DT534A#ABA PK402A DC359A#ABA DC895B#ABA DC303B DV574A#ABA DC899A PB994A PB993A

Carrying Cases

HP Entry Value Case HP Top Load Nylon HP Executive Leather case HP Sport Backpack
DL617A DC915A PA847A DG102A

Page 14

Security PC Card Smart Card Reader HP/Kensington Cable Lock

DC350B PC766A

Input/Output Devices
USB/PS2 Keyboard USB/PS2 Optical Mouse HP USB Optical Travel Mouse Rechargeable Wireless Mouse
DC852A#ABA DC369A F2100A DU960A

HP Care Pack Services

9x5 Pick-up and Return - 4 Years 9x5 Pick-up and Return - 5 Years 9x5 Pick-up and Return - 1 Year Post Warranty 9x5 Next-Business-Day On-Site Coverage - 3 Years 9x5 Next-Business-Day On-Site Coverage - 4 Years 9x5 Next-Business-Day On-Site Coverage - 5 Years 9x5 Next-Business-Day On-Site Coverage - 1 Year Post Warranty 9x5 Next-Business-Day On-Site Coverage for Notebook with Off-Site Accidental Damage Protection Service - 3 Years 9x5 Next-Business-Day On-Site Coverage for Notebook with Off-Site Accidental Damage Protection Service - 4 Years 9x5 Pick-up and Return Coverage with Off-Site Accidental Damage Protection Service - 3 Years 9x5 Pick-up and Return Coverage with Off-Site Accidental Damage Protection Service - 4 Years
U7868E U7869E U4426PE U4414E U7860E U7861E U4416PE 365711-001 365712-001 U4428E U9586E

Page 15

Up to 2048 MB of 333-MHz DDR SDRAM Two DIMM slots (user accessible - one under keyboard deck, one via panel on bottom of unit) DIMM sizes supported: 256 MB, 512 MB, or 1024 MB Standard Memory 256 MB (256 MB x 1) 512 MB (512 MB x 1 or 256 MB x 2) 1024 MB (1024 MB x 1 or 512 MB x 2) Support for up to 2048 MB of memory is available (with the installation of optional DDR SDRAM memory kits). Both memory slots are user accessible. Please refer to the Hardware and Software Guide for installation procedures. Slot MB 1024 MB 512 MB 1024 MB 1024 MB 1024 MB Slot MB Empty 512 MB 256 MB 512 MB 1024 MB

Optional Memory Upgrades

Up to 768 MB 1024 MB 1024 MB 1280 MB 1536 MB 2048 MB
NOTE: This chart does not represent all possible memory configurations. Due to the non-industry standard nature of some third-party memory modules, we strongly recommend using only HP branded memory modules to ensure compatibility. If you mix memory speeds, the system will perform at the lower memory speed.

Memory Upgrades

1024-MB 333-MHz DDR SDRAM 512-MB 333-MHz DDR SDRAM 256-MB 333-MHz DDR SDRAM

DC890B DC390B DC389B

Page 16
Removable Media Drive Support
Quantity Supported One One One Drive Bay Fixed optical drive bay Fixed optical drive bay Fixed optical drive bay
DVD+/-RW Drive DVD/CD-RW Combo Drive DVD-ROM Drive

Hard Drive Support

Quantity Supported One One One One Drive Bay Dedicated hard drive bay Dedicated hard drive bay Dedicated hard drive bay Dedicated hard drive bay
100-GB 5400 rpm SMART Hard Drive 80-GB 5400 rpm SMART Hard Drive 60-GB 5400 rpm SMART Hard Drive 40-GB 5400 rpm SMART Hard Drive

Page 17

Technical Specifications
System Unit Dimensions (HxWxD) Weight
1.2 (at front) x 12.9 x 10.5 in (30.3 (at front) x 328.6 x 267 mm) nc6120 with 15.0-inch 6.06 lb (2.75 kg) display NOTE: Height varies depending upon where on the notebook the measurement is made. Weight varies by configuration and components. Weight includes 6-cell battery, 30-GB hard drive, 256-MB memory, and CD-ROM drive. Weight varies by configuration and components. Nominal Operating 18.5 V Stand-Alone Power Voltage Requirements Average Operating Power 21 W Max Operating Power < 65W Operating 32 to 95 F (0 to 35 C) (not writing optical) Temperature 41 to 95 F (5 to 35 C) (writing optical) Non-operating -4 to 140 F (-20 to 60 C) Operating 10% to 90%, non-condensing Relative Humidity Non-operating 5% to 95%, 101.6 F (38.7 C) maximum wet bulb temperature Operating 125 G, 2 ms, half-sine Shock Non-operating 200 G, 2 ms, half-sine Operating 0.75 grms Random Vibration Non-operating 1.50 grms Operating -50 to 10,000 ft (-15.24 to 3,048 m) Altitude (unpressurized) Non-operating -50 to 40,000 ft (-15.24 to 12,192 m) Blue Angel No Industry Standard Certifications UL Yes Energy Star Yes Canadian Safety Yes CSA (Canada) Yes ICES Yes TUV GS No Nordic Safety No Mexican Safety Yes Poland Compliance Yes Australia / NZ Yes Compliance CCC Yes Japan Compliance Yes MIC Yes BSMI Yes CE Marking Compliance Yes KONCAR Yes GOST Yes SASO Yes SABS Yes UKRSERTCOMPUTER Yes DA - 12136 North America Version 26 September 6, 2006 Page 18
65W External AC Adapter Weight Dimensions Input

Output Environmental

0.62 lb (0.28 kg) (adapter) 0.29 lb (0.13 kg) (power cord) 4.17 x 1.85 x 1.1 in (10.6 x 4.7 x 2.8 cm) Operating Input Voltage 100 to 240 VAC Operating Input Current 1.7A at 90 VAC 0.85A at 180 VAC Operating Frequency 47 to 63 Hz AC Range Efficiency 83% minimum at 115 VAC Output Power 65 W DC Output Current 18.5 V Operating Temperature 32 to 104 F (0 to 40 C) Non-operating (storage) -4 to 149 F (-20 to 65 C) Temperature Altitude 0 to 10,000 ft (0 to 3,048 m) Humidity 20% to 80% Storage Humidity 10% to 90% CE Mark: full compliance with LVD and EMC directives Worldwide safety standards: IEC950, EN60950, UL1950, Class2, SELV Agency approvals: C-UL-US, NORDICS, DENAN, EN55022 Class B, FCC Class B, CISPR22 Class B, CCIB, NOM-1 NYCE Over 200,000 hours at 25C ambient condition

Page 21

80-GB 5400 rpm Drive Weight Capacity Height Width Interface Transfer Rate Seek Time (typical reads, including settling) Rotational Speed Logical Blocks Operating Temperature Features
0.22 lb (101 g) 80 GB 0.37 in (9.5 mm) 2.75 in (70 mm) ATA-7 Synchronous (maximum) 100 MB/s (Drive Capability) Single Track 3 ms Average 13 ms Maximum 24 ms 5400 rpm 156,301,to 131 F (5 to 55 C) ATA Security

60-GB 5400 rpm

0.22 lb (101 g) 60 GB 0.37 in (9.5 mm) 2.75 in (70 mm) ATA-7 Synchronous (maximum) 100 MB/s (Drive Capability) Single Track 3 ms Average 13 ms Maximum 24 ms 5400 rpm 117,210,to 131 F (5 to 55 C) ATA Security

40-GB 5400 rpm

0.22 lb (101 g) 40 GB 0.37 in (9.5 mm) 2.75 in (70 mm) ATA-7 Synchronous (maximum) 100 MB/s (Drive Capability) Single Track 3 ms Average 13 ms Maximum 24 ms 5400 rpm 78,140,to 131 F (5 to 55 C) ATA Security

Page 22

Removable Storage Drives Fixed Bay

DVD-ROM Drive

Access Times Max Data Transfer Rate Transfer Mode Interface Supported Media (read)

Random

Supported Media (write) Max Media Capacity (read) Transport
24X-CD-ROM 8X-DVD Multiword DMA Mode 2 EIDE CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (Photo-CD, Video CD), Multisession CD (Photo-CD, CD-EXTRA, Portfolio, CD-R, CD-RW), CD-R, CD-RW, DVDROM (DVD-5, DVD-9, DVD-10, DVD-18), DVD-R, DVD-RW, DVD+R, DVD+RW None 4.7 GB Tray Loading
<100 ms CD <125 ms DVD 3,600 KB/s 10,800 KB/s

DVD/CD-RW Combo Drive

Access Times Max Data Transfer Rate
Transfer Mode Interface Supported Media (read)
Supported Media (write) Max Media Capacity (read) Max Media Capacity (write) Transport
24X CD-ROM 8X DVD 24X CD-R 24X CD-RW Multiword DMA Mode 2 EIDE CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (Photo-CD, Video CD), Multisession CD (Photo-CD, CD-EXTRA, Portfolio, CD-R, CD-RW), CD-R, CD-RW, DVDROM (DVD-5, DVD-9, DVD-10, DVD-18), DVD-R, DVD-RW, DVD+R, DVD+RW CD-R, CD-RW 4.7 GB 700 MB Tray loading

<110 ms CD <130 ms DVD 3,600 KB/s 10,800 KB/s 3,600 KB/s 3,600 KB/s

Page 23

DVD+/-RW Drive Access Times Max Data Transfer Rate Random
24X CD-ROM 8X DVD 16X CD-R 10X CD-RW 4X DVD+R 4X DVD+RW 4X DVD-R 2X DVD-RW Multiword DMA Mode 2 EIDE CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (Photo-CD, Video CD), Multisession CD (Photo-CD, CD-EXTRA, Portfolio, CD-R, CD-RW), CD-R, CD-RW, DVDROM (DVD-5, DVD-9, DVD-10, DVD-18), DVD-R, DVD-RW, DVD+R, DVD+RW CD-R, CD-RW, DVD+R, DVD+RW, DVD-R, DVD-RW 8.5 GB 4.7 GB Tray Loading
<175 ms CD <230 ms DVD 3,600 KB/s 10,800 KB/s 2,400 KB/s 1,500 KB/s 5,400 KB/s 5,400 KB/s 5,400 KB/s 2,700 KB/s
8X DVD+/-RW Drive with Access Times Double Layer Technology and LightScribe 8X DVD+/RW Drive with Double Layer Technology Max Data Transfer Rate
Supported Media (write) Max Media Capacity (read)
24X CD-ROM 8X DVD 24X CD-R 10X CD-RW 8X DVD+R 4X DVD+RW 8X DVD-R 4X DVD-RW 2.4X DVD+R(9) Multiword DMA Mode 2 EIDE CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (Photo-CD, Video CD), Multisession CD (Photo-CD, CD-EXTRA, Portfolio, CD-R, CD-RW), CD-R, CD-RW, DVDROM (DVD-5, DVD-9, DVD-10, DVD-18), DVD-R, DVD-RW, DVD+R, DVD+RW CD-R, CD-RW, DVD+R, DVD+RW, DVD-R, DVD-RW 8.5 GB
<175 ms CD <230 ms DVD 3,600 KB/s 10,800 KB/s 3,600 KB/s 1,500 KB/s 10,800 KB/s 5,400 KB/s 10,800 KB/s 5,400 KB/s 2,700 KB/s

Page 24

Max Media Capacity (write) Transport 8.5 GB Tray Loading

Hardware

Implementation Volume Controls Full Duplex Sound Blaster Pro compatible Microphone Jack Headphone/Line Out Jack
ADI AC 97 CODEC Up, down, and mute buttons Yes Yes Stereo or mono Stereo

Audio Output Quality

Frequency Response Signal to Noise Ratio Total Harmonic Distortion Noise Floor Play/Record Sampling Rate(s) Rate AD/DA Resolution
20 Hz - 20 kHz >85 dB 0.01% -110 dB 7 kHz - 48 kHz 16 bit

Internal Speakers

Power Rating Impedance

2 Watts 4 Ohms

Page 25
Integrated NetXtreme Ethernet Features Gigabit Ethernet Controller (10/100/1000 NIC)
10 Mbit/s operation (10BASE-T; IEEE 802.3i; IEEE 802.3 clauses 13-14) 100 Mbit/s operation (100BASE-TX; IEEE 802.3u; IEEE 802.3 clauses 2130) 1000 Mbit/s operation (1000BASE-T; IEEE 802.3z and 802.3ab; IEEE 802.3 clauses 34-42) Auto-Negotiation (Automatic Speed Selection) Full Duplex Operation at all Speeds, Half Duplex operation at 10 and 100 Mbit/s IEEE 802.1p QoS (Quality of Service) Support IEEE 802.3x Flow Control (IEEE 802.3 clauses 31-32; configurable) ACPI 1.1a compliant -- multiple power modes Power Management Situation-sensitive features reduce power consumption NIC Battery Saving Mode (enabled by default) TCP/IP/UDP Checksum Offload (configurable) Performance Features Microsoft Large Send Offload (configurable) TCP Segmentation Offload CPU Task Offload Adaptive Interrupts Wake-on-LAN from all Power-Managed States (configurable; Magic Packet Manageability and Microsoft Wake-Up Frame) PXE 2.0 Remote Boot Statistics Gathering (SNMP MIB II, Ethernet-like MIB, Ethernet MIB (802.3x, clause 30)) Comprehensive diagnostic and configuration software suite Cable Analyzer NIC Device Driver Name Broadcom NetXtreme Gigabit Ethernet Microsoft Windows XP Drivers Available Microsoft Windows 2000
Agere Systems AC'97 Modem
Form Factor Power Management Support Approvals/ Certifications
MDC Daughtercard APM Revision 1.2, ACPI UL, CSA, NEMKO, CCIB, Industry Canada, FCC Part 68, CTR21, FCC Part 15 Class B, Canadian ICES-003 Class B, C.I.S.P.R.22, Australian ACA, CE Mark, Other Countries

Page 26

Data Mode Capabilities

Fax Mode Capabilities

Command Set
56K modem (a-law, mu-law) V.8bis V.80 V44, V.42bis, MNP5 (Compression) V.42 (LAPM, MNP2-4) (Error Correction) V.34 (file date: 10/96) Optional symbol rates: 2800, 3429 Asymmetric Symbol rates Synchronous primary channel data signaling rates: 3600, 31200 Automatic rate re-negotiation V.32bis V.32 V.23 V.22bis V.22 V.21 Bell 212A Bell 103J TIA/EIA-578-B (Class 1) T.30, T.4 (Group 3) V.17 V.29 V.27ter V.21 Channel 2 V.250 (Partial) TIA-602 Identification: +GMI, +GMM, +GMR Port control: +IPR, +ICF, +IFC, +ILRR Modulation: +MS, +MR, +MA Error control: +ES, +ER, +EB, +ESR, +ETBM Data compression: +DS, +DR V.251

Broadcom 802.11b/g WLAN

Wireless LAN Standards Interoperability
Frequency Band Data Rates Modulation
IEEE 802.11b IEEE 802.11g Wi-Fi certified Cisco Compatible Extensions Program compliant (details at http://www.hp.com/go/notebooks/WLAN) 2.4 GHz 802.11b: 1, 2, 5.5, 11 Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps Direct Sequence Spread Spectrum DBPSK, DQPSK, CCK, OFDM

Page 27

Security1
Supports 64- and 128-bit WEP, WPA, WPA2, hardware-accelerated AES, 802.1x authentication types EAP-TLS, EAP-TTLS, PEAP-GTC, PEAPMSCHAPv2, LEAP, EAP-FAST.

Support for Cisco Security Features (proven compatibility with Cisco Aironet infrastructure products through the Cisco Compatible Extensions Program). Multinational support with frequency bands and channels compliant to local Sub-channels regulations. CSMA/CA (Collision Avoidance) with ACK Media Access Protocol Ad-hoc (Peer to Peer) Network Architecture Infrastructure (Access Point Required) Models IEEE 802.11 compliant roaming between access points. Roaming 2 17.5 dBm +/- 1.5 dB Output Power (for CKK) Output Power (for OFDM; 13.5 dBm +/- 1.5 dB power varies by data rate)2 Transmit: 2.0 W (max) Power Consumption Receive: 1.5 W (max) Idle mode: 248 mW (nominal) Sleep mode: 20 mW (max) ACPI compliant power management Power Management 802.11 Compliant Power Saving Mode Mbps: -72 dBm,1 Mbps: -94 dBm Receiver Sensitivity High efficiency dual band antenna with polarization diversity, mounted in the Antenna type display enclosure 802.11 b Typical 1200 feet Outdoor Open Area Range (@1 Mbps) 300 feet Indoor, Office environment 802.11 g Typical 1200 feet Outdoor Open Area (@1 Mbps) 300 feet Indoor, Office environment MiniPCI Type IIIB Form Factor 0.026 lb (12 g) Weight 0.20 x 1.75 x 2.34 in (4.9 x 44.6 x 59.8 mm) Dimensions 3.3v Operating Voltage Operating 32 to 122 F (0 to 50 C) Temperature Non-operating -14 to 158 F (-10 to 70 C) Operating 10% to 90% (non-condensing) Humidity Non-operating 5% to 95% (non-condensing) Operating 0 to 15,000 ft (4,572 m) Altitude Non-operating 0 to 40,000 ft (12,192 m)

Page 28

Configuration Utility4 Choice of Configuration Utility:

1. 2. 3. 4.

Microsoft Windows XP Wireless Network Connection Manager Broadcom Wireless Configuration Utility (required for Cisco Compatible Extensions support) Check latest software/driver release for updates on supported security features. Maximum output power may vary by country according to local regulations. Receiver sensitivity is measured at a packet error rate of 8% for 802.11b (CKK modulation) and a packet error rate of 10% for 802.11a/g (OFDM modulation). WLAN supplier's client utility is required for Cisco Compatible Extensions support. WLAN may also be compatible with certain third-party software supplicants.
Broadcom 4311AG 802.11a/b/g WiFi Adapter

Wireless LAN Standards

Interoperability
Frequency Band Data Rates Modulation Security1
IEEE 802.11a IEEE 802.11b IEEE 802.11g Wi-Fi certified Cisco Compatible Extensions Program compliant (details at www.hp.com/go/notebooks/WLAN) 2.4 GHz and 5 GHz 802.11b: 1, 2, 5.5, 11 Mbps 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps Direct Sequence Spread Spectrum DBPSK, DQPSK, CCK, OFDM Supports 64- and 128-bit WEP, WPA, WPA2, hardware-accelerated AES, 802.1x authentication types EAP-TLS, EAP-TTLS, PEAP-GTC, PEAPMSCHAPv2, LEAP, EAP-FAST, EAP-SIM.
Support for Cisco Security Features (proven compatibility with Cisco Aironet infrastructure products through the Cisco Compatible Extensions Program Version 4). Multinational support with frequency bands and channels compliant to local Sub-channels regulations. CSMA/CA (Collision Avoidance) with ACK Media Access Protocol Ad-hoc (Peer to Peer) Network Architecture Infrastructure (Access Point Required) Models IEEE 802.11 compliant roaming between access points Roaming Output Power (for CKK)2 17.5 dBm Output Power (for OFDM; 15 dBm power varies by data rate)2 Transmit: 2.0 W (max) Power Consumption Receive: 1.5 W (max) Idle mode: 390 mW (nominal) Sleep mode: 20 mW (max) ACPI compliant power management Power Management 802.11 compliant power saving mode 54 Mbps: -72 dBm, 11 Mbps: -88 dBm , 1 Mbps: -97 dBm Receiver Sensitivity3 High efficiency dual band antenna with spatial diversity, mounted in the Antenna type display enclosure

Page 29

Form Factor Weight Dimensions Operating Voltage Temperature Humidity Altitude Configuration Utility4
802.11 a Typical 1000 feet Outdoor Open Area (@6 Mbps) 300 feet Indoor, Office environment 802.11 b Typical 1200 feet Outdoor Open Area (@1 Mbps) 300 feet Indoor, Office environment 802.11 g Typical 1200 feet Outdoor Open Area (@1 Mbps) 300 feet Indoor, Office environment MiniPCI Type IIIA 0.035 lb (16 g) 0.19 x 2.00 x 2.35 in (4.8 x 50.95 x 59.75 mm) 3.3v Operating 32 to 122 F (0 to 50 C) Non-operating -14 to 158 F (-10 to 70 C) Operating Non-operating Operating Non-operating 10% to 90% (non-condensing) 5% to 95% (non-condensing) 0 to 15,000 ft (4,572 m) 0 to 40,000 ft (12,192 m)
Choice of Configuration Utility:
Intel PRO/Wireless 2200BG 802.11b/g WLAN
IEEE 802.11b IEEE 802.11g Wi-Fi certified Cisco Compatible Exensions Program compliant (details at http://www.hp.com/go/notebooks/wlan) 2.4 GHz 802.11b: 1, 2, 5.5, 11 Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps Direct Sequence Spread Spectrum DBPSK, DQPSK, CCK, OFDM Supports 64- and 128-bit WEP, WPA, WPA2, hardware-accelerated AES, 802.1x authentication types EAP-TLS, EAP-TTLS, PEAP-GTC, PEAPMSCHAPv2, LEAP, EAP-FAST. Support for Cisco Security Features (proven compatibility with Cisco Aironet infrastructure products through the Cisco Compatible Extensions Program). Multinational support with frequency bands and channels compliant to local regulations. CSMA/CA (Collision Avoidance) with ACK
Sub-channels Media Access Protocol

Page 30

Network Architecture Models Roaming Output Power (for CKK)2 Output Power (for OFDM; power varies by data rate)2 Power Consumption
Ad-hoc (Peer to Peer) Infrastructure (Access Point Required) IEEE 802.11 compliant roaming between access points. 16 dBm +/- 2 dB 15 dBm +2/-5 dB
Power Management Receiver Sensitivity3 Antenna type Range
Transmit: 1.8 Watts (max) Receive: 1.4 Watts (max) Idle mode: 75 mW (nominal) Sleep mode: 60 mW ACPI compliant power management 802.11 Compliant Power Saving Mode 54 Mbps: -72 dBm, 11 Mbps: -88 dBm , 1 Mbps: -97 dBm High efficiency dual band antenna with polarization diversity, mounted in the display enclosure 802.11 b Typical 1200 feet Outdoor Open Area (@1 Mbps) 300 feet Indoor, Office environment 802.11 g Typical 1200 feet Outdoor Open Area (@1 Mbps) 300 feet Indoor, Office environment MiniPCI Type IIIB 0.026 lb (11.75 g) (max) 0.20 x 1.75 x 2.34 in (4.9 x 44.6 x 59.8 mm) 3.3v Operating 32 to 158 F (0 to 70 C) Non-operating -40 to 176 F (-40 to 80 C) Operating 10% to 90% (non-condensing) Non-operating 5% to 95% (non-condensing) Operating 0 to 10,000 ft (3,048 m) Non-operating 0 to 50,000 ft (15,240 m) Choice of Configuration Utility:

Intel PROSet for Microsoft Windows 2000 or XP (required for Cisco Compatible Extensions support) Microsoft Windows XP Wireless Network Connection Manager Check latest software/driver release for updates on supported security features. Maximum output power may vary by country according to local regulations. Receiver sensitivity is measured at a packet error rate of 8% for 802.11b (CKK modulation) and a packet error rate of 10% for 802.11a/g (OFDM modulation). WLAN supplier's client utility is required for Cisco Compatible Extensions support. WLAN may also be compatible with certain third-party software supplicants.
Intel PRO/Wireless 2915ABG 802.11a/b/g WLAN
IEEE 802.11a IEEE 802.11b IEEE 802.11g Wi-Fi certified Cisco Compatible Exensions Program compliant (details at http://www.hp.com/go/notebooks/WLAN)

Page 31

2.4 GHz and 5 GHz 802.11b: 1, 2, 5.5, 11 Mbps 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps Direct Sequence Spread Spectrum DBPSK, DQPSK, CCK, OFDM Supports 64- and 128-bit WEP, WPA, WPA2, hardware-accelerated AES, 802.1x authentication types EAP-TLS, EAP-TTLS, PEAP-GTC, PEAPMSCHAPv2, LEAP, EAP-FAST. Support for Cisco Security Features (proven compatibility with Cisco Aironet infrastructure products through the Cisco Compatible Extensions Program). Multinational support with frequency bands and channels compliant to local regulations. CSMA/CA (Collision Avoidance) with ACK Ad-hoc (Peer to Peer) Infrastructure (Access Point Required) IEEE 802.11 compliant roaming between access points 16 dBm +/- 2 dB 15 dBm +2/-5 dB
Sub-channels Media Access Protocol Network Architecture Models Roaming Output Power (for CKK)2 Output Power (for OFDM; power varies by data rate)2 Power Consumption
Form Factor Weight Dimensions Operating Voltage Temperature Humidity Altitude
Transmit: 1.8 Watts (max) Receive: 1.4 Watts (max) Idle mode: 100 mW (nominal) Sleep mode: 60 mW (max) ACPI compliant power management 802.11 Compliant Power Saving Mode 54 Mbps: -72 dBm, 11 Mbps: -89 dBm , 1 Mbps: -97 dBm High efficiency dual band antenna with polarization diversity, mounted in the display enclosure 802.11 a Typical 600 feet Outdoor Open Area (@6 Mbps) 150 feet Indoor, Office environment 802.11 b Typical 1200 feet Outdoor Open Area (@1 Mbps) 300 feet Indoor, Office environment 802.11 g Typical 1200 feet Outdoor Open Area (@1 Mbps) 300 feet Indoor, Office environment MiniPCI Type IIIB 0.026 lb (11.75 gm) (max) 0.20 x 1.75 x 2.34 in (4.9 x 44.6 x 59.8 mm) 3.3v +/- 10% Operating 32 to 176 F (0 to 80 C) Non-operating -40 to 176 F (-40 to 80 C) Operating 10% to 90% (non-condensing) Non-operating 5% to 95% (non-condensing) Operating 0 to 10,000 ft (3,048 m) Non-operating 0 to 50,000 ft (15,240 m)

External device works? Replace system board.
Reseat internal keyboard connector (if applicable).
OK? Replace internal keyboard or cable.

Done OK? Done

Flowchart 2.19Nonfunctioning Pointing Device
Pointing device not operating properly.
Connect computer to good external pointing device.
Reseat internal pointing device connector (if applicable).
OK? Replace internal pointing device or cable.
Flowchart 2.20No Network/Modem Connection
No network or modem connection.
Network or modem jack active? Replace jack or have jack activated.
Digital line? Connect to nondigital line.
NIC/modem configured in OS? Reload drivers and reconfigure. OK?
Disconnect all power from the computer and open.
Replace the NIC/modem (if applicable).
Reseat NIC/modem (if applicable). OK? Done
Software Updates and Recovery

3.1 Software Updates

To stay current with the newest technology and maintain optimal performance, install the latest versions of HP software on your computer as they become available. To update HP software: 1. Identify your computer model, product category, and series or family. Prepare for a system ROM update by identifying the ROM version currently installed on the computer. For more information, refer to Accessing Computer Information.
CAUTION: If your computer is connected to a network, it is recommended that you consult with your network administrator before installing any software updates, especially system ROM updates.
The computer system ROM stores the BIOS software. The BIOS initializes the operating system, determines how the
computer will interact with the hardware devices, and provides for data transfer among hardware devices, including the time and date. 2. Access the updates through the HP Web site (http://www.hp.com) or the Support Software CD (purchased separately). For information about obtaining the Support Software CD, refer to Obtaining the Support Software CD. 3. Install the updates.
Accessing Computer Information
Before you access the updates for your computer, collect the following information:
The product category is Notebook. The product family name and series number are printed on the display bezel. Model information is provided on the serial number label on the bottom of the computer.
To determine whether available ROM updates contain later ROM versions than those currently installed on the computer, you need to know the version of the system ROM currently installed. ROM version information (also known as ROM date and System BIOS) can be displayed by pressing fn+esc (if you are already in Microsoft Windows) or by opening Computer Setup. To use Computer Setup for displaying ROM information: 1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the F10 = ROM Based Setup message is displayed in the lower-left corner of the screen. 2. Use the arrow keys to select File > System Information, and then press enter. ROM date information is displayed. 3. To exit Computer Setup, use the arrow keys to select File > Ignore changes and exit. Then follow the instructions on the screen.

3.2 System Recovery

The computer system recovery process provides several ways to recover optimal system functionality. For best results, attempt to recover optimal computer functionality by using the following procedures in the order described here.

Safeguarding Your Data

Software or devices added to the computer can cause your system to become unstable. To safeguard your documents, store personal files in the My Documents folder and periodically create a backup copy of the My Documents folder.

Altiris Local Recovery

Altiris Local Recovery is a preloaded application that protects the files on your computer by storing copies of files, called snapshots. If files on your computer are accidentally deleted or corrupted, you can easily restore the files yourself. You can also restore your complete file system to a previous state. Altiris Local Recovery provides protection of files by backing up files to a hidden Altiris recovery partition. When you install the software, the Recovery Agent Partition Wizard guides you through the process of creating the recovery partition. After the partition is created, the computer restarts and creates the first snapshot. After the snapshot is created, the computer restarts, making the snapshot available for recovery through Windows. By default, Local Recovery automatically takes snapshots of your files on a regular basis. You can change the snapshot schedule. For more information, refer to the Altiris Local Recovery Help. To access your snapshots in the Altiris Recovery Agent folder: 1. Right-click the Altiris Recovery Agent icon on your desktop. 2. Click Open.
To restore one of the listed snapshots, drag the snapshot file to the appropriate location on your hard drive. For more information on configuring and using Altiris Local Recovery, visit the HP Web site at http://www.hp.com/go/easydeploy, or open the software and click Help on the menu bar.
Using System Restore Points
System Restore is an operating system feature that allows you to reverse undesirable changes to your computer by restoring the computer to an earlier state, called a restore point. A restore point is a snapshot of your software, drivers, and operating system files at a particular time. The computer automatically creates restore points at regular intervals and may create additional restore points when you change your personal settings or add software or hardware. You can manually create additional restore points to provide increased protection for your system files and settings. It is recommended that you manually create restore points

Before you add or extensively modify software or hardware. Periodically, whenever the system is performing optimally.
Restoring to any restore point does not affect your data files. For example, restoring your system software to an earlier state will not affect documents or e-mails that you saved after that time.
If you do not like the results of your restoration, you can reverse the restoration.
Creating a System Restore Point
To create a system restore point: 1. Select Start > Help and Support. 2. Click System Restore. The System Restore window opens. 3. Click Create a restore point, and then click Next. 4. Follow the on-screen instructions.
Restoring to a Restore Point
To restore the computer to a previous date and time when it was functioning optimally: 1. Select Start > Help and Support. 2. Click System Restore. The System Restore window opens. 3. Click Restore my computer to an earlier time, and then click Next. 4. Follow the on-screen instructions.
Reinstalling Applications
Applications preinstalled or preloaded on your computer can be reinstalled by using the Recovery disc or a third-party software disc. cases, the applications preloaded on In most those available in the Software Setupyour computer, such as Utility, can be
reinstalled from your hard drive. To access the Software Setup Utility, select Start > All Programs > Software Setup. The application reinstallation process replaces corrupted system files within the application and reinstalls deleted system files within the application.
In most cases: If the application you are reinstalling is still installed on your computer, the reinstallation process does not affect your settings within the application. In all cases: If an application has been deleted from your computer, the reinstallation process reinstalls the application or utility to the factory image but cannot restore your personal settings.
Reinstalling Applications from the Hard Drive
To reinstall a preloaded application or utility from your hard drive: 1. Select Start > All Programs > Software Setup, and then follow the instructions on the screen. 2. When you are prompted to select the software you want to reinstall, select or clear the appropriate check boxes.
Reinstalling Applications from Discs
To reinstall applications from discs: 1. Insert the disc into the optical drive.
If autorun is enabled, an installation wizard opens. If autorun is disabled, select Start > Run. Enter x:\setup.exe
where x is your optical drive designation and then select OK. 2. When the installation wizard opens, follow the installation instructions on the screen. 3. Restart the computer if prompted.
Repairing the Operating System
To attempt an operating system repair without deleting your personal data, use the Operating System disc that was shipped with the computer: does not have an optical drive, If your computeroptional external MultiBay. you may need to connect to an 1. Connect the computer to external power through the AC adapter and turn on the computer. 2. Immediately insert the Operating System disc into the computer. 3. Press and hold the power button for at least 5 seconds to turn off the computer. 4. Press the power button again to turn on the computer. 5. When prompted, press any key to start from the disc.

381580-001 381581-001 381582-001 381583-001 373032-002 373032-291 373032-001 373900-021 373900-291 373033-002 373033-291 373900-001 373033-001 373901-001
Battery packs 6-cell, 4.8-AHr 6-cell, 4.4-AHr 6-cell, 4.4-AHr 6-cell, 2.2-AHr 367457-001 372772-001 383220-001 364602-001
Optical drives (include bezel) 24X Max CD-ROM drive 8X Max DVD-ROM drive 8X Max DVDRW and CD-RW Combo Drive 4X Max DVDRW and CD-RW Combo Drive 2X Max DVDRW and CD-RW Combo Drive DVD/CD-RW Combo Drive DVDRW and CD-RW Double Layer Combo Drive DVDRW and CD-RW Combo Drive
380768-001 380770-001 380773-001 380771-001 375557-001 380772-001 398608-001 403093-001 367871-001
Broadcomm Bluetooth wireless board (includes Bluetooth board cable) Hard drives (include frame and connector) 5400-rpm 80-GB 60-GB 40-GB 380108-001 378215-001 380107-001 4200-rpm 80-GB 60-GB 40-GB 30-GB
378214-001 378213-001 378212-001 378211-001
4.3 Miscellaneous Plastics Kit
Table 3-2 Miscellaneous Plastics Kit Spare Part Number Information

Item Description

Miscellaneous Plastics Kit Includes: 5 Memory module/Mini PCI compartment cover (includes 1 captive screw) Hard drive cover (includes 2 captive screws) RTC battery Computer feet (4) PC Card slot space savers (2)

378236-001

4.4 Miscellaneous Cable Kit
Table 3-3 Miscellaneous Cable Kit Spare Part Number Information
Miscellaneous Cable Kit Includes: 381709-001
Bluetooth board cable LED board cable RJ-11 connector module and cable Audio board cable USB board cable Serial connector module cable

4.5 Mass Storage Devices

Table 3-4 Mass Storage Devices Spare Part Number Information
Hard drives (include frame and connector) 5400-rpm 80-GB 60-GB 40-GB 380108-001 378215-001 380107-001 4200-rpm 80-GB 60-GB 40-GB 30-GB
Optical drives (include bezel) 24X Max CD-ROM drive 8X Max DVD-ROM drive 8X Max DVDRW and CD-RW Combo Drive 4X Max DVDRW and CD-RW Combo Drive 2X Max DVDRW and CD-RW Combo Drive DVD/CD-RW Combo Drive DVDRW and CD-RW Double Layer Combo Drive DVDRW and CD-RW Combo Drive 380768-001 380770-001 380773-001 380771-001 375557-001 380772-001 398608-001 403093-001
4.6 Miscellaneous (Not Illustrated)
Table 3-5 Miscellaneous (Not Illustrated) Spare Part Information
Description 65 watt AC adapter HP Advanced Docking Station HP Docking Station Docking Device Miscellaneous Plastics Kit Carrying cases Nylon top load 325815-001 and 325815-002 325814-001 366143-001 366144-001 373315-001 373314-001 375198-001 367456-001 359118-001 Spare Part Number 239704-001 374804-001 374803-001 380089-001
Nylon entry-level External MultiBay cradle External MultiBay cradle power cable and stand MultiBay 24X DVD/CD-RW Combo Drive MultiBay 8X DVD-ROM Drive MultiBay hard drive, 80-GB, 5400-rpm 8-cell travel battery USB 1.1 diskette drive
Table 3-5 Miscellaneous (Not Illustrated) Spare Part Information (Continued)

Description Screw Kit (includes the following screws; refer to Appendix C, Screw Listing, for more information on specifications and usage Hex socket HM5.09.0 screw lock Phillips PM2.513.0 spring-loaded screw Phillips PM2.54.0 shoulder screw Phillips PM2.54.0 screw Phillips PM2.08.0 shoulder screw Phillips PM2.07.0 screw Spare Part Number 378235-001
Phillips PM2.04.0 screw Phillips PM2.03.0 screw Phillips PM1.54.0 screw Phillips PM1.53.5 screw Torx8 T8M2.09.0 screw Torx8 T8M2.04.0 screw Torx8 T8M2.02.0 screw
Description Power cords For use in: Australia and New Zealand Belgium, Europe, Finland, France, Germany, Greece, the Netherlands, Norway, Portugal, Spain, and Sweden Brazil Canada, French Canada, Latin America, Taiwan, Thailand, and the United States Denmark Hong Kong and the United Kingdom Israel Italy Japan Korea Sweden 246959-011 246959-021 246959-201 246959-001 246959-081 246959-031 246959-BB1 246959-061 246959-291 246959-AD1 246959-AG1 Spare Part Number
4.7 Sequential Part Number Listing
Table 3-6 Sequential Part Number Listing
239704-001 246959-001 246959-011 246959-021
65-watt AC adapter Power cord for use in Canada, French Canada, Latin America, Taiwan, Thailand, and the United States Power cord for use in Australia and New Zealand Power cord for use in Belgium, Europe, Finland, France, Germany, Greece, the Netherlands, Norway, Portugal, Spain, and Sweden Power cord for use in Hong Kong and the United Kingdom Power cord for use in Italy Power cord for use in Denmark Power cord for use in Brazil Power cord for use in Japan Power cord for use in Korea Power cord for use in Sweden Power cord for use in Israel Modem board Nylon entry-level carrying case Nylon top load carrying case Nylon top load carrying case 128-MB memory module, 400-MHz DDR2 256-MB memory module, 400-MHz DDR2 512-MB memory module, 400-MHz DDR2
246959-031 246959-061 246959-081 246959-201 246959-291 246959-AD1 246959-AG1 246959-BB1 325521-001 325814-001 325815-001 325815-002 336576-001 336577-001 336578-001
Table 3-6 Sequential Part Number Listing (Continued)

336579-001 359118-001 364602-001 366143-001 366144-001 367456-001 367457-001 367871-001 372772-001 373032-001 373032-002 373032-291 373033-001 373033-002 373033-291 373314-001 373315-001 373900-001
1024-MB memory module, 400-MHz DDR2 USB 1.1 diskette drive 6-cell, 2.2-AHr battery pack External MultiBay cradle External MultiBay cradle power cable and stand 8-cell travel battery 6-cell, 4.8-AHr battery pack Broadcomm Bluetooth wireless board, includes cable 6-cell, 4.4-AHr battery pack 802.11b/g combination WLAN Mini PCI communications card for use in the United States 802.11b/g combination WLAN Mini PCI communications card for use internationally 802.11b/g combination WLAN Mini PCI communications card for use Japan 802.11a/b/g combination WLAN card Mini PCI communications card for use in the United States 802.11a/b/g combination WLAN Mini PCI communications card for use internationally 802.11a/b/g combination WLAN Mini PCI communications card for use in Japan MultiBay 8X DVD-ROM Drive MultiBay 24X DVD/CD-RW Combo Drive 802.11a/b/g combination WLAN card Mini PCI communications card for use in most of the world
373900-021 373900-291 373901-001 374803-001 374804-001 375198-001 375557-001 378208-001 378209-001 378210-001 378211-001 378212-001 378213-001 378214-001 378215-001 378216-001 378217-001 378218-001 378219-001
802.11a/b/g combination WLAN Mini PCI communications card for use Europe, Middle East, and Africa 802.11a/b/g combination WLAN Mini PCI communications card for use Japan 802.11a/b/g High Band combination WLAN Mini PCI communications card HP Docking Station HP Advanced Docking Station MultiBay hard drive, 80-GB, 5400-rpm 2X Max DVDRW and CD-RW Combo Drive, includes bezel 14.1-inch, XGA, TFT, display assembly, includes wireless antenna boards and cables 15.0-inch, XGA, TFT, display assembly, includes wireless antenna boards and cables 15.0-inch, SXGA+WVA, TFT display assembly, includes wireless antenna boards and cables 30-GB hard drive, 4200-rpm, includes frame and connector 40-GB hard drive, 4200-rpm, includes frame and connector 60-GB hard drive, 4200-rpm, includes frame and connector 80-GB hard drive, 4200-rpm, includes frame and connector 60-GB hard drive, 5400-rpm, includes frame and connector Intel Celeron M 1.3-GHz processor, includes thermal paste Intel Celeron M 1.4-GHz processor, includes thermal paste Intel Celeron M 1.5-GHz processor, includes thermal paste Intel Pentium M 1.30-GHz processor, includes thermal paste

399110-001 403093-001

Removal and Replacement Preliminaries
This chapter provides essential information for proper and safe removal and replacement service.

5.1 Tools Required

You will need the following tools to complete the removal and replacement procedures: Magnetic screwdriver Phillips P0 screwdriver Torx8 screwdriver 5.0-mm socket for system board locks Flat-bladed screwdriver Tool kitincludes connector removal tool, loopback plugs, and case utility tool
5.2 Service Considerations
The following sections include some of the considerations that you should keep in mind during disassembly and assembly procedures.
As you remove each subassembly from the computer, place the subassembly (and all accompanying screws) away from
the work area to prevent damage.

Plastic Parts

Using excessive force during disassembly and reassembly can damage plastic parts. Use care when handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions.

Cables and Connectors

CAUTION: When servicing the computer, ensure that cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat the cables during removal and insertion. Handle cables by the connector whenever possible. In all cases, avoid bending, twisting, or tearing cables. Ensure that cables are routed in such a way that they cannot be caught or snagged by parts being removed or replaced. Handle flex cables with extreme care; these cables tear easily.
5.3 Preventing Damage to Removable Drives
Removable drives are fragile components that must be handled with care. To prevent damage to the computer, damage to a removable drive, or loss of information, observe the following precautions: Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the computer on, and then shut it down through the operating system. Before removing a diskette drive or optical drive, ensure that a diskette or disc is not in the drive and ensure that the optical drive tray is closed. Before handling a drive, ensure that you are discharged of static electricity. While handling a drive, avoid touching the connector. Handle drives on surfaces covered with at least one inch of shock-proof foam. Avoid dropping drives from any height onto any surface. After removing a hard drive, an optical drive, or a diskette drive, place it in a static-proof bag. Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers. Avoid exposing a drive to temperature extremes or liquids. If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective packaging and label the package FRAGILE: Handle With Care.

6. Remove the 4 Phillips PM1.54.0 screws 1 that secure the LED board to the switch cover. 7. Remove the LED board 2.

Removing the LED Board

Reverse the above procedure to install the LED board.

6.13 Fan

Fan Spare Part Number Information

Fan 378233-001

1. Prepare the computer for disassembly (Section 6.3). 2. Release the keyboard (Section 6.10). 3. Disconnect the fan cable 1 from the system board. 4. Loosen the 2 Phillips PM2.07.0 screws 2 that secure the fan to the computer. 5. Remove the fan 3.

Removing the Fan

Reverse the above procedure to install the fan.

6.14 Heat Sink

Heat Sink Spare Part Number Information
Heat sink (includes thermal paste) 379799-001
1. Prepare the computer for disassembly (Section 6.3). 2. Release the keyboard (Section 6.10). 3. Remove the fan (Section 6.13). 4. Loosen the 4 Phillips PM2.08.0 shoulder screws 1 that secure the heat sink to the computer. 5. Lift the right side of the heat sink 2 to disengage it from the processor. 6. Slide the heat sink 3 up and to the right to remove it. to the Dueheatthe adhesive quality of maythermal paste located between the sink and processor, it be necessary to move the heat sink from side to side to detach the heat sink from the processor.

Removing the Heat Sink

Reverse the above procedure to install the heat sink.

6.15 Processor

Processor Spare Part Number Information
Intel Pentium M 2.13-GHz Intel Pentium M 2.00-GHz Intel Pentium M 1.86-GHz Intel Pentium M 1.73-GHz Intel Pentium M 1.60-GHz Intel Pentium M 1.30-GHz Intel Celeron M 1.5-GHz Intel Celeron M 1.4-GHz Intel Celeron M 1.3-GHz 378224-001 378223-001 378222-001 378221-001 378220-001 378219-001 378218-001 378217-001 378216-001
1. Prepare the computer for disassembly (Section 6.3). 2. Release the keyboard (Section 6.10). 3. Remove the fan (Section 6.13). 4. Remove the heat sink (Section 6.14).
5. Use a flat-bladed screwdriver to turn the processor locking screw 1 one-quarter turn counterclockwise until you hear a click. 6. Lift the processor 2 straight up and remove it. 3 on The gold triangle when the processor should be aligned in the front right corner you install the processor.

Removing the Processor

Reverse the above procedure to install the processor.

6.16 Modem Board

Modem Board Spare Part Number Information

Modem board 325521-001

1. Prepare the computer for disassembly (Section 6.3). 2. Release the keyboard (Section 6.10).
3. Remove the 2 Phillips PM2.03.0 screws 1 that secure the modem board to the computer. 4. Lift the right side of the modem board 2 to disconnect it from the system board. 5. Disconnect the modem cable 3 from the modem board. 6. Remove the modem board.

Removing the Modem Board

Reverse the above procedure to install the modem board.
6.17 Internal Memory Module
1024 MB 512 MB 256 MB 336579-001 336578-001 366577-001
1. Prepare the computer for disassembly (Section 6.3). 2. Release the keyboard (Section 6.10). 3. Spread the retaining tabs 1 on each side of the memory module socket to release the memory module. (The edge of the module opposite the socket rises away from the computer.) 4. Slide the module 2 away from the socket at an angle. 5. Remove the memory module. designed with notches to prevent Memory modules areinto the memory module3socket. incorrect installation
634 Maintenance and Service Guide

6.18 RTC Battery

included in The RTC battery is378236-001.the Miscellaneous Plastics Kit, spare part number 1. Prepare the computer for disassembly (Section 6.3). 2. Release the keyboard (Section 6.10). 3. Disconnect the RTC battery cable 1 from the system board. 4. Remove the RTC battery 2 from the clip in the top cover.

Removing the RTC Battery

Reverse the above procedure to install an RTC battery.

6.19 Display Assembly

Display Assembly Spare Part Number Information
15.0-inch, SXGA+WVA, TFT 15.0-inch, XGA, TFT 14.1-inch, XGA, TFT 378210-001 378209-001 378208-001
1. Prepare the computer for disassembly (Section 6.3). 2. Remove the Memory module/Mini PCI compartment cover (Section 6.7) and disconnect the wireless antenna cables from the Mini PCI communications module (Section 6.8). 3. Remove the keyboard (Section 6.10). 4. Remove the switch cover (Section 6.11)
5. Disconnect the display cable 1 from the system board. 6. Remove the wireless antenna cables 2 from the Mini PCI compartment and the top cover clips. 7. Remove the 2 Torx8 T8M2.09.0 screws 3 that secure the display assembly to the computer.
Disconnecting the Display Cable and Removing the Display Screws
8. Swing the display assembly into a partially closed position. 9. Position the computer with the rear panel toward you.
CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components.

2. Disconnect the speaker cable from the system board.
Disconnecting the Speaker Cable
3. Remove the 4 Torx8 T8M2.04.0 screws 1 that secure the speaker to the computer. 4. Lift the speaker 2 until it clears the system board. 5. Slide the speaker 3 toward you and remove it.

Removing the Speaker

Reverse the above procedure to install the speaker.

6.22 Digital Media Board

Digital Media Board Spare Part Number Information
Digital media board (includes digital media board cable) 378229-001
1. Prepare the computer for disassembly (Section 6.3), and then remove the following components: a. Hard drive (Section 6.4) b. Memory module/Mini PCI compartment cover (Section 6.7) c. Optical drive (Section 6.9) d. Keyboard (Section 6.10) e. Switch cover (Section 6.11) f. Display assembly (Section 6.19) g. Top cover (Section 6.20) h. Speaker (Section 6.21)
2. Release the ZIF connector to which the digital media board cable is attached and disconnect the digital media board cable 1 from the system board. 3. Remove the digital media board 2.
Removing the Digital Media Board
Reverse the above procedure to install the digital media board.

6.23 USB/Audio Board

USB/audio Full-featured models are equipped with aaudio board.board. Defeatured models are equipped with an The removal procedures are identical for both boards.
USB/Audio Board Spare Part Number Information
USB/audio board (for use only with full-featured models; includes audio board cable and USB board cable) Audio board (for use only with defeatured models; includes audio board cable) 378226-001 378241-001
2. Position the computer with the rear panel toward you. 3. Disconnect the USB cable 1 and audio cable 2 from the system board. USB cable present only on full-featured models. The Remove theisPhillips PM1.53.0 screw 3 that secures the 4. USB/audio board and shield to the base enclosure. 5. Remove the cables from the clips 4 in the base enclosure. 6. Remove the USB/audio board 5.
Removing the USB/Audio Board
Reverse the above procedure to install the USB/audio board.

6.24 System Board

System Board Spare Part Number Information
For use with full-featured models For use with defeatured models-GML For use with defeatured models-GML 378225-001 378238-001 383219-001
the system board, the following When replacing removed from the ensure thatsystem board and components are defective installed on the replacement system board: Memory modules (Section 6.7 and Section 6.17) Mini PCI communications card (Section 6.8) Processor (Section 6.15) Modem board (Section 6.16)

IRQ12 IRQ13 IRQ14 IRQ15

*Default configuration; audio possible configurations are IRQ5, IRQ7, IRQ9, IRQ10, or none. assert IRQ3, PC Cards maythe infrared or IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, or IRQ15. Either the serial port may assert IRQ3 or IRQ4.
Table 7-13 System I/O Addresses
I/O Address (hex) 000 - 00F 010 - 01F 020 - - - 03F 02E - 02F 040 - 05F 044 - 05F 062 - 065 - 06F 070 - - 07F 080 - 08F 090 - 093 - 09F 0A0 - 0A1 System Function (shipping configuration) DMA controller no. 1 Unused Interrupt controller no. 1 Opti chipset configuration registers Unused 87334 Super I/O configuration for CPU Counter/timer registers Unused Keyboard controller Port B Unused Keyboard controller Unused NMI enable/RTC Unused DMA page registers Unused Port A Unused Interrupt controller no. 2
Table 7-13 System I/O Addresses (Continued)
I/O Address (hex) 0A2 - 0BF 0C0 - 0DF 0E0 - 0EF 0F0 - 0F1 0F2 - 0FF 100 - 16F 170 - - 1EF 1F0 - 1F7 1F8 - 202 - 21F 220 - 22F 230 - 26D 26E - - 27F 280 - 2AB 2A0 - 2A7 2A8 - 2E7 2E8 - 2EF System Function (shipping configuration) Unused DMA controller no. 2 Unused Coprocessor busy clear/reset Unused Unused Secondary fixed disk controller Unused Primary fixed disk controller Unused Joystick (decoded in ESS1688) Unused Entertainment audio Unused Unused Unused Unused Unused Unused Reserved serial port
I/O Address (hex) 2F0 - 2F7 2F8 - 2FF 300 - 31F 320 - 36F 370 - - 37F 380 - - 38B 38C - 3AF 3B0 - 3BB 3BC - 3BF 3C0 - 3DF 3E0 - 3E1 3E2 - 3E3 3E8 - 3EF 3F0 - 3F7 3F8 - 3FF CF8 - CFB CFC - CFF System Function (shipping configuration) Unused Infrared port Unused Unused Secondary diskette drive controller Parallel port (LPT1/default) Unused FM synthesizerOPL3 Unused VGA Reserved (parallel port/no EPP support) VGA PC Card controller in CPU Unused Internal modem A diskette controller Serial port (COM1/default) PCI configuration index register (PCIDIVO-1) PCI configuration data register (PCIDIVO-1)
Table 7-14 System Memory Map
Size 640 KB 128 KB 48 KB 160 KB 64 KB 15 MB 58 MB 58 MB 2 MB 4 GB 64 KB Memory Address 00000000-0009FFFF 000A0000-000BFFFF 000C0000-000CBFFF 000C8000-000E7FFF 000E8000-000FFFFF 00100000-00FFFFFF 01000000-047FFFFF 04800000-07FFFFFF 08000000-080FFFFF 08200000-FFFEFFFF FFFF0000-FFFFFFFF System Function Base memory Video memory Video BIOS Unused System BIOS Extended memory Super extended memory Unused Video memory (direct access) Unused System BIOS
Connector Pin Assignments
Table A-1 Audio-Out (Headphone)

Screw Listing

This appendix provides specification and reference information for the screws and screw locks used in the computer. All screws and screw locks listed in this appendix are available in the Screw Kit, spare part number 378235-001.
Table C-1 Phillips PM2.04.0 Screw

Head Width 4.0 mm

Color Black

Qty. 3

Length 4.0 mm

Thread 2.0 mm

Where used: 1 Two screws that secure the hard drive cover to the computer (screws are captured on the cover by C clips; documented in Section 6.4) 2 One screw that secures the memory module/Mini PCI compartment cover to the computer (screw is captured on the cover by a C clip; documented in Section 6.7)
Phillips PM2.04.0 Screw Locations
Table C-2 Phillips PM2.513.0 Spring-loaded Hard Drive Retention Screw

Head Width 5.5 mm

Color Silver

Qty. 1

Length 13.0 mm

Thread 2.5 mm

Where used: One screw that secures the hard drive to the computer (screw is captured on the hard drive frame by a C clip; documented in Section 6.4)
Phillips PM2.513.0 Screw Location
Table C-3 Phillips PM2.54.0 Shoulder Screw, Phillips PM2.54.0 Screw, and Phillips PM1.53.5 Screw
Color Silver Qty. 2 Length 4.0 mm Thread 2.5 mm Head Width 4.0 mm Head Width 4.5 mm Head Width 4.5 mm

Qty. 2

Length 3.5 mm

Thread 1.5 mm

Where used: 1 Two screws that secure the hard drive frame to the hard drive (documented in Section 6.4) 2 Two screws that secure the hard drive frame to the hard drive (documented in Section 6.4) 3 Two screws that secure the hard drive frame to the hard drive (documented in Section 6.4)
Phillips PM2.54.0 Shoulder Screw, Phillips PM2.54.0 Screw, and Phillips PM1.53.5 Screw Locations
Table C-4 Torx8 T8M2.09.0 Screw

Qty. 24

Length 9.0 mm
Where used: One screw that secures the optical drive to the computer (documented in Section 6.9)
Torx8 T8M2.09.0 Screw Location
Table C-4 Torx8 T8M2.09.0 Screw (Continued)

Torx8 T8M2.04.0 Screw Location
Where used: One screw that secures the system board the computer (documented in Section 6.24)
Table C-11 Hex Socket HM5.09.0 Screw Lock
Where used: 1 Two screw locks that secure the system board to the computer only on HP Compaq nc6110 and nc6120 computer models (documented in Section 6.24) 2 Two screw locks that secure the system board to the computer (documented in Section 6.24)
Hex Socket HM5.09.0 Screw Lock Locations
Table C-11 Hex Socket HM5.09.0 Screw Lock (Continued)
Where used: 2 screw locks that secure the serial connector board to the system board (documented in Section 6.25)
Display Component Recycling
WARNING: The backlight contains mercury. Caution should be exercised when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. CAUTION: The procedures in this appendix can result in damage to display components. The only components intended for recycling purposes are the liquid crystal display (LCD) panel and the backlight. Careful handling should be exercised when removing these components.
Materials Disposal mercury in the backlight in the display This HP product contains
assembly that might require special handling at end-of-life. Disposal of mercury may be regulated because of environmental considerations. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance (EIA) at http://www.eiae.org.
This appendix provides disassembly instructions for the display assembly. The display assembly must be disassembled to gain access to the backlight 1 and the liquid crystal display (LCD) panel 2.
procedures differ from Disassembly procedures provided in one display assembly to another. The this appendix are general
disassembly instructions. Specific details, such as screw sizes, quantities, and locations, and component shapes and sizes, can vary from one computer model to another.
Perform the following steps to disassemble the display assembly: 1. Remove all screw covers 1 and screws 2 that secure the display bezel to the display assembly.
Removing the Display Bezel Screw Covers and Screws
2. Lift up and out on the left and right inside edges 1 and the top and bottom inside edges 2 of the display bezel until the bezel disengages from the display assembly. 3. Remove the display bezel 3.
Removing the Display Bezel
4. Disconnect all display panel cables 1 from the display inverter and remove the inverter 2.
Removing the Display Inverter
5. Remove all screws 1 that secure the display panel assembly to the display enclosure. 6. Remove the display panel assembly 2 from the display enclosure.