279362-001.bookPage7Monday,July8,200211:49AM
Removal and Replacement Procedures
4. Remove a Media Bay device by following these steps: a. Turn the notebook bottom side up with the left side facing forward. b. Slide and hold the Media Bay release latch toward the back of the notebook 1 (Figure 5-3). c. Use the notch in the Media Bay device to slide the device out of the Media Bay 2.
Figure 5-3. Removing a Media Bay Device
Reverse the preceding procedure to install the Media Bay device.
Maintenance and Service Guide
279362-001.bookPage8Monday,July8,200211:49AM
Hard Drive Spare Part Number Information
For use with Evo Notebook N610c models only: 40 GB 30 GB 20 GB For use with Evo Notebook N600c models only: 30 GB 20 GB 15 GB 10 GB
265495-001 257660-001 235540-101 217096-001 235421-001 241429-001 217094-001
5. Remove the hard drive by following these steps: a. Turn the notebook bottom side up with the right side facing forward.
279362-001.bookPage9Monday,July8,200211:49AM
b. Remove the PM2.5 2.5 hard drive retention screw 1 (Figure 5-4). c. Separate the hard drive bezel 2. d. Use the bezel to slide the hard drive forward 3 to unseat the hard drive connector from the system board. e. Remove the hard drive.
Figure 5-4. Removing the Hard Drive
Reverse the preceding procedure to install the hard drive.
279362-001.bookPage10Monday,July8,200211:49AM
6. Loosen the two PM1.5 3.5 screws 1 that secure the hard drive bezel to the hard drive (Figure 5-5). 7. Remove the hard drive bezel from the hard drive 2.
Figure 5-5. Removing the Hard Drive Bezel
The hard drive bezel is included in the Miscellaneous Plastics Kit, spare part number 241439-001.
279362-001.bookPage11Monday,July8,200211:49AM

5.4 Computer Feet

The notebook feet are adhesive-backed rubber pads. The notebook feet are included in the Miscellaneous Plastics Kit (spare part number 241439-001). Refer to Figure 5-6 for notebook feet locations.
Figure 5-6. Replacing the Notebook Feet