Reviews & Opinions
Independent and trusted. Read before buy IBM Thinkpad X60S!

IBM Thinkpad X60S

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
IBM Thinkpad X60S - Hardware Guide Laptop & Notebook, size: 8.2 MB
Related manuals
IBM Thinkpad X60S Supplementary Guide
IBM Thinkpad X60S Install Guide

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

IBM Thinkpad X60SLenovo 92P6237-02 IBM ThinkPad X60s Hard Drive Sub Card 2.5-Inch


Details
Brand: IBM Corp.
Part Numbers: 92P6237-02, 92P623702


Here you can find all about IBM Thinkpad X60S, for example drivers and specifications, battery. You can also write a review.

 

[ Report abuse or wrong photo | Share your IBM Thinkpad X60S photo ]

Video review

IBM ThinkPad X60 modified boot screen

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 5. Page 1 of 1. Average Rating:
atuche 6:39am on Wednesday, August 11th, 2010 
Light, fast, and stylish. Good Warranty if you buy Lenovo Think Plus plans. Impressive keyboard Docking seems unreliable.
weqwerwrwerewrewrwerewrew 10:15am on Wednesday, June 16th, 2010 
Good battery but NOT for X61 Aug/10: Was told by seller that this model is NOT meant for X61. So whomever bought this for their X61.
cmosentine 5:31pm on Thursday, May 6th, 2010 
Ok at the beginning but very short life span I purchased this battery in February 2009. It works well at the beginning.
AndiD 6:26am on Friday, April 2nd, 2010 
I have decided that this is the end for Lenov...  Nice engineering - except for overheating problem. Overheats. I had to weigh in with an opinion on this mac...  weight, construction, speed battery losing spark after one year Maybe I got a lemon. But, during my first si...  Excellent when it works. Pretty fast, good key board No optical drive.
www.webhosting.uk.com 5:39am on Friday, March 19th, 2010 
Tiny, light, fast, runs forever Integrated graphics, Windows keys crowd the keyboard, expensive

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Introduction

Important service information
Important BIOS and device driver fixes are customer-installable. The BIOS and device drivers are posted on the customer support site http://www.lenovo.com/ support Advise customers to contact the Customer Support Center at 800-426-7378 if they need assistance in obtaining or installing any software fixes, drivers, and BIOS downloads. Customers in Canada should call the Customer Support Center at 800-565-3344 for assistance or download information.
Strategy for replacing FRUs
Before replacing parts Make sure that all software fixes, drivers, and BIOS downloads are installed before replacing any FRUs listed in this manual. After a system board is replaced, ensure that the latest BIOS is loaded to the system board before completing the service action. To download software fixes, drivers, and BIOS, do as follows: 1. Go to http://www.lenovo.com/support 2. Enter the product number of the computer or press Auto-detect button on the screen. 3. Select Downloads and drivers. 4. Follow the directions on the screen and install the necessary software. Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: v If you are instructed to replace a FRU but the replacement does not correct the problem, reinstall the original FRU before you continue. v Some computers have both a processor board and a system board. If you are instructed to replace either the processor board or the system board, and replacing one of them does not correct the problem, reinstall that board, and then replace the other one. v If an adapter or a device consists of more than one FRU, any of the FRUs may be the cause of the error. Before replacing the adapter or device, remove the FRUs, one by one, to see if the symptoms change. Replace only the FRU that changed the symptoms.
Attention: The setup configuration on the computer you are servicing may have been customized. Running Automatic Configuration may alter the settings. Note the current configuration settings (using the View Configuration option); then, when service has been completed, verify that those settings remain in effect.
Strategy for replacing a hard disk drive
Always try to run a low-level format before replacing a hard disk drive. This will cause all customer data on the hard disk to be lost. Be sure that the customer has a current backup of the data before doing this task. Attention: The drive startup sequence in the computer you are servicing may have been changed. Be extremely careful during write operations such as copying, saving, or formatting. If you select an incorrect drive, data or programs can be overwritten.

Important notice for replacing a system board
Some components mounted on a system board are very sensitive. Improper handling of a system board can cause damage to those components, and may cause a system malfunction. Attention: When handling a system board: v Do not drop a system board or apply any excessive force to it. v Avoid rough handling of any kind. v Avoid bending a system board and hard pushing to prevent cracking at each BGA (Ball Grid Array) chipset.
How to use error messages
Use the error codes displayed on the screen to diagnose failures. If more than one error code is displayed, begin the diagnosis with the first error code. Whatever causes the first error code may also cause false error codes. If no error code is displayed, see whether the error symptom is listed in the Symptom-to-FRU Index for the computer you are servicing.
Strategy for replacing FRUs for CTO, CMV, and GAV Product definition
Dynamic Configure To Order (CTO) This provides the ability for a customer to configure an IBM or a LenovoTM solution from an eSite, and have this configuration sent to fulfillment, where it is built and shipped directly to the customer. The machine label, Product Entitlement Warehouse (PEW), eSupport, and the HMM will load these products as the 4-digit MT and 3-digit model, where model = CTO (Example: 1829-CTO). Custom Model Variant (CMV) This is a unique configuration that has been negotiated between IBM or Lenovo and the customer. A unique 4-digit MT and 3-digit model is provided to the customer to place orders (Example: 1829-W15). A CMV is a special bid offering. Therefore, it is NOT generally announced. v The MTM portion of the machine label is the 4-digit MT and 3-digit model, where model = CTO (Example: 1829-CTO). The PRODUCT ID portion of the machine label is the 4-digit MT and 3-digit CMV model (Example: 1829-W15).
v The PEW record is the 4-digit MT and 3-digit model, where model = CTO (Example: 1829-CTO). v eSupport will show both the CTO and CMV machine type models (Example: 1829-CTO and 1829-W15 will be found on the eSupport site.) v The HMM will have the 4-digit MT and 3-digit CTO model only (Example: 1829-CTO). Again, CMVs are custom models and are not found in the HMM. General Announce Variant (GAV) This is a standard model (fixed configuration). GAVs are announced and offered to all customers. The MTM portion of the machine label is a 4-digit MT and 3-digit model, where model = a fixed part number, not CTO (Example: 1829-F1U). Also, PEW, eSupport, and the HMM will list these products under the same fixed model number.

Using the HMM

Use the HMM as a back-up to PEW and eSupport to view the complete list of FRUs at the MT Model level.
Important information about replacing RoHS compliant FRUs
RoHS, The Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry. RoHS requirements must be implemented on Lenovo products placed on the market and sold in the European Union after June 2006. Products on the market before June 2006 are not required to have RoHS compliant parts. If the original FRU parts are non compliant, replacement parts can also be non compliant. In all cases if the original FRU parts are RoHS compliant the replacement part must also be RoHS compliant. Note: RoHS and non-RoHS FRU part numbers with the same fit and function are identified with unique FRU part numbers. Lenovo plans to transition to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo's requirements and schedule in the EU. Products sold in 2005 and 2006, will contain some RoHS compliant FRUs. The following statement pertains to these products and any product Lenovo produces containing RoHS compliant FRUs. RoHS compliant FRUs have unique FRU part numbers. Before or after the RoHS implementation date, failed RoHS compliant parts must always be replaced using RoHS compliant FRUs, so only the FRUs identified as compliant in the system HMM or direct substitutions for those FRUs may be used.
Products marketed before June 2006 Current or original part Non-RoHS Non-RoHS Non-RoHS RoHS Replacement FRU Can be Non-RoHS Can be RoHS Can sub to RoHS Must be RoHS Products marketed after June 2006 Current or original part Must be RoHS Replacement FRU Must be RoHS
Note: A direct substitution is a part with a different FRU part number that is automatically shipped by the distribution center at the time of the order.
Diskette compatibility matrix
The compatibility of each of the drives with the diskettes for it is as follows:
Diskette drive 3.5-inch Diskette capacity 1.0 MB 2.0 MB 4.0 MB Compatibility Read and write Read and write Not compatible
Safety notices: multilingual translations
In this manual, safety notices appear in English with a page number reference to the appropriate multilingual, translated safety notice found in this section. The following safety notices are provided in English, French, German, Hebrew, Italian, and Spanish. Safety notice 1
Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer. Verify this by shaking the computer and listening for rattling sounds. Metallic parts or metal flakes can cause electrical shorts. Avant de remettre lordinateur sous tension aprs remplacement dune unit en clientle, vrifiez que tous les ressorts, vis et autres pices sont bien en place et bien fixes. Pour ce faire, secouez lunit et assurez-vous quaucun bruit suspect ne se produit. Des pices mtalliques ou des copeaux de mtal pourraient causer un court-circuit. Bevor nach einem FRU-Austausch der Computer wieder angeschlossen wird, mu sichergestellt werden, da keine Schrauben, Federn oder andere Kleinteile fehlen oder im Gehuse vergessen wurden. Der Computer mu geschttelt und auf Klappergerusche geprft werden. Metallteile oder-splitter knnen Kurzschlsse erzeugen.

v v v v

v Do not service the following parts with the power on when they are removed from their normal operating places in a machine: Power supply units Pumps Blowers and fans Motor generators and similar units. (This practice ensures correct grounding of the units.) v If an electrical accident occurs: Use caution; do not become a victim yourself. Switch off power. Send another person to get medical aid.

Safety inspection guide

The purpose of this inspection guide is to assist you in identifying potentially unsafe conditions. As each machine was designed and built, required safety items were installed to protect users and service personnel from injury. This guide addresses only those items. You should use good judgment to identify potential safety hazards due to attachment of non-ThinkPad features or options not covered by this inspection guide. If any unsafe conditions are present, you must determine how serious the apparent hazard could be and whether you can continue without first correcting the problem. Consider these conditions and the safety hazards they present: v Electrical hazards, especially primary power (primary voltage on the frame can cause serious or fatal electrical shock) v Explosive hazards, such as a damaged CRT face or a bulging capacitor v Mechanical hazards, such as loose or missing hardware To determine whether there are any potentially unsafe conditions, use the following checklist at the beginning of every service task. Begin the checks with the power off, and the power cord disconnected. Checklist: 1. Check exterior covers for damage (loose, broken, or sharp edges). 2. Power off the computer. Disconnect the power cord. 3. Check the power cord for: a. A third-wire ground connector in good condition. Use a meter to measure third-wire ground continuity for 0.1 ohm or less between the external ground pin and the frame ground. b. The power cord should be the type specified in the parts list. c. Insulation must not be frayed or worn. 4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-ThinkPad alterations. Use good judgment as to the safety of any non-ThinkPad alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage. 8. Check for worn, frayed, or pinched cables.
9. Check that the power-supply cover fasteners (screws or rivets) have not been removed or tampered with.
Handling devices that are sensitive to electrostatic discharge
Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD.) ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge.

A total progress bar allows you to audit this process, which will take about 8 minutes. The final recovery disc may be safely removed during this time, but may also be left in the optical drive since it is not bootable. 7. You will then be prompted to restart the computer. Select Yes. A warning window appears, giving you one last chance to stop the restart, but disappears automatically after about 5 seconds. File processing continues in DOS full screen mode for about two minutes and the computer restarts to the Windows desktop. No user intervention is required (and should be avoided) after this point. 8. Windows setup continues on the desktop and DOS window for IBM system setup, with progress measured by a Factory Preinstallation window on the right side of the screen. The processes are updating installed softwares. A warning that antivirus software is not installed appears repeatedly in the system tray, but this should be ignored. The entire process at desktop takes about 25 minutes. 9. Then the computer restarts, does some more DOS full screen processing, and restarts again to a Windows desktop where factory preinstallation continues for about 12 more minutes, another restart to a DOS screen and then back to the Windows splash screen and back to the desktop for more preinstallation. This lasts about 10 more minutes and the computer restarts to do NTFS conversion and then restarts to the OOBE (Out of Box Experience) environment.

Passwords

As many as three passwords may be needed for any ThinkPad computer: the power-on password (POP), the hard-disk password (HDP), and the supervisor password (SVP). If any of these passwords has been set, a prompt for it appears on the screen whenever the computer is turned on. The computer does not start until the password is entered. Exception: If only an SVP is installed, the password prompt does not appear when the operating system is booted. Power-on password: A power-on password (POP) protects the system from being powered on by an unauthorized person. The password must be entered before an operating system can be booted. Hard-disk password: There are two hard-disk passwords (HDPs): v User HDPfor the user v Master HDPfor the system administrator, who can use it to get access to the hard disk even if the user has changed the user HDP Note: There are two modes for the HDP: User only and Master + User. The Master + User mode requires two HDPs; the system administrator enters both in the same operation. The system administrator then provides the user HDP to the system user.

Attention: If User only mode is selected and the user HDP has been forgotten and cannot be made available to the servicer, neither Lenovo nor Lenovo authorized servicers provide any services to reset the user HDPs or to recover data from the hard disk drive. The hard disk drive can be replaced for a scheduled fee. To remove a user HDP that has been forgotten, when the SVP and the master HDP are known, do the following: 1. Turn on the computer; then, while the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left of the screen, press the ThinkVantage button. The Rescue and Recovery screen opens. For models supporting the Passphrase function, press F1 while HDP icon is appearing on the screen; then enter the master HDP. For the other models, enter the master HDP. Note: To check whether the ThinkPad computer supports the Passphrase function, enter the BIOS Setup Utility and go to Security --> Password. If Using Passphrase item is displayed in the menu, this function is available on the ThinkPad computer. Click Access BIOS. The system Restart Required window is displayed. Click Yes. The computer restarts, and the BIOS Setup Utility screen opens. Select Security, using the cursor directional keys to move down the menu. Select Password.

2. 3. 4. 5.

6. Select Hard-disk x password, where x is the letter of the hard disk drive. A pop-up window opens. 7. Select Master HDP. 8. Type the current master HDP in the Enter Current Password field. then leave the Enter New Password field blank, and press Enter twice. 9. Press F10. 10. Select Yes in the Setup Configuration window. Both user HDP and master HDP will have been removed.

Power management

To reduce power consumption, the computer has three power management modes: screen blank, standby, and hibernation.

Screen blank mode

If the time set on the Turn off monitor timer in the operating system expires, the LCD backlight turns off. To put the computer into screen blank mode, press the ThinkVantage button and use the ThinkVantage Productivity Center. To end screen blank mode and resume normal operation, press any key.

Standby mode

When the computer enters standby mode, the following events occur in addition to what occurs in screen blank mode: v The LCD is powered off. v The hard disk drive is powered off. v The CPU stops.
To enter standby mode, press Fn+F4. Note: If you are using the ACPI operating system, you can change the action of Fn+F4. In certain circumstances, the computer goes into standby mode automatically: v If a suspend time has been set on the timer, and the user does not do any operation with the keyboard, the TrackPoint , the hard disk, the parallel connector, or the diskette drive within that time. v If the battery indicator blinks orange, indicating that the battery power is low. (Alternatively, if Hibernate when battery becomes low has been selected in the Power Management Properties window, the computer goes into hibernation mode.) Note for the APM operating system: Even if you do not set the low-battery alarm, the charge indicator notifies you when the battery is low, and then the computer enters the power-saving mode automatically. This default low-battery behavior is independent of the operating system; so if you have set the low-battery alarm, the computer may not do what you specified. It chooses either your setting or the default setting, whichever is appropriate. If you are using the ACPI operating system, only the low-battery alarm is available. To cause the computer to return from standby mode and resume operation, do one of the following: v Press the Fn key. v Open the LCD cover. v Turn on the power switch. Also, in either of the following events, the computer automatically returns from standby mode and resumes operation: v The ring indicator (RI) is signaled by a serial device or a PC Card device. v The time set on the resume timer elapses. Note: The computer does not accept any input immediately after it enters standby mode. Wait a few seconds before taking any action to reenter operation mode.

If you suspect a power problem, see the appropriate one of the following power supply checkouts: v Checking the ac adapter v Checking operational charging on page 31 v Checking the battery pack on page 31 v Checking the backup battery on page 32

Checking the ac adapter

You are here because the computer fails only when the ac adapter is used. v If the power problem occurs only when the ThinkPad X6 Tablet UltraBase is used, replace the UltraBase. v If the power-on indicator does not turn on, check the power cord of the ac adapter for correct continuity and installation. v If the computer does not charge during operation, go to Checking operational charging. To check the ac adapter, do the following: 1. Unplug the ac adapter cable from the computer. 2. Measure the output voltage at the plug of the ac adapter cable. See the following figure:

Voltage (V dc) +Ground

1 (20V)
Note: Output voltage of pin no.2 of the ac adapter may different from the one you are servicing. 3. If the voltage is not correct, replace the ac adapter. 4. If the voltage is acceptable, do the following: v Replace the system board. v If the problem persists, go to Product overview on page 34. Note: Noise from the ac adapter does not always indicate a defect.
Checking operational charging
To check whether the battery charges properly during operation, use a discharged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer. Perform operational charging. If the battery status indicator or icon does not turn on, remove the battery pack and let it return to room temperature. Reinstall the battery pack. If the charge indicator or icon still does not turn on, replace the battery pack. If the charge indicator still does not turn on, replace the system board. Then reinstall the battery pack. If it is still not charged, go to the next section.
Checking the battery pack
Battery charging does not start until the Power Meter shows that less than 95% of the total power remains; under this condition the battery pack can charge to 100% of its capacity. This protects the battery pack from being overcharged or from having a shortened life. To check your battery, move your cursor to the Power Meter icon in the icon tray of the Windows taskbar and wait for a moment (but do not click), and the percentage of battery power remaining is displayed. To get detailed information about the battery, double-click the Power Meter icon. Note: If the battery pack becomes hot, it may not be able to charge. Remove it from the computer and leave it at room temperature for a while. After it cools down, reinstall and recharge it. To check the battery pack, do the following: 1. Power off the computer. 2. Remove the battery pack and measure the voltage between battery terminals 1 (+) and 7 (). See the following figure:

Fn+F6 Fn+F7

Key combination Description Fn+F7 Switch a display output location v External monitor (CRT display) v Computer display and external monitor (LCD + CRT display) v Computer display (LCD) Notes: 1. This function is not supported if different desktop images are displayed on the computer display and the external monitor (the Extend desktop function). 2. This function does not work while a DVD movie or a video clip is playing. To enable this function, start Presentation Director, and change the Fn+F7 settings. Note: Multiple users can log on to a single operating system by using different user IDs. Each user needs to change the settings. Fn+F8 Fn+F9 Reserved. Open the ThinkPad EasyEject Utility screen. Buttons for the following choices are displayed: v Eject ThinkPad PC from Dock: This button is displayed only if the ThinkPad computer has been attached to a ThinkPad X6 Tablet UltraBase. The computer can be detached from the ThinkPad X6 Tablet UltraBase. v Run EasyEject Actions: This button is used to select, stop, or remove external devices connected to the ThinkPad computer. v Configure EasyEject Actions: Opens the ThinkPad EasyEject Utility main window. v Fn+F9 Settings: Configures the settings for the Fn+F9 function. Reserved. Reserved. Put the computer into hibernation mode. To return to normal operation, press the power button for less than four seconds. Note: To use Fn+F12 for hibernation, you must have the ThinkPad PM device driver installed on the computer. The computer display becomes brighter. The computer display becomes dimmer. Enable the FullScreen Magnifier function. Has the same function as the SysRq key. Enable or disable the numeric keypad. Has the same function as the Break key. These key combinations work with Windows Media Player. Fn+down arrow key works for the Play or Pause button, Fn+up arrow key for the Stop button, Fn+right arrow key for the Next Track button, and Fn+left arrow key for the Previous Track button.

Fn+F10 Fn+F11 Fn+F12

Fn+Home Fn+End Fn+Spacebar Fn+PrtSc Fn+ScrLk Fn+Pause Fn+cursor keys

Symptom-to-FRU index

FRU replacement notices

This section contains notices related to removing and replacing parts. Read this section carefully before replacing any FRU.

Screw notices

Loose screws can cause a reliability problem. In the ThinkPad computer, this problem is addressed with special nylon-coated screws that have the following characteristics: v They maintain tight connections. v They do not easily come loose, even with shock or vibration. v They are harder to tighten. v Each one should be used only once. Do the following when you service this machine: v Keep the screw kit (for the P/N, see Miscellaneous parts on page 155) in your tool bag. v Always use new screws. v Use a torque screwdriver if you have one. Tighten screws as follows: v Plastic to plastic Turn an additional 90 degrees after the screw head touches the surface of the plastic part:

90 degrees more

(Cross-section)
v Logic card to plastic Turn an additional 180 degrees after the screw head touches the surface of the logic card:

180 degrees more

v Torque driver If you have a torque driver, refer to the Torque column for each step. v Make sure that you use the correct screw. If you have a torque screwdriver, tighten all screws firmly to the torque shown in the table. Never use a screw that you removed. Use a new one. Make sure that all of the screws are tightened firmly. v Ensure torque screwdrivers are calibrated correctly following country specifications.

Retaining serial numbers

This section includes the following descriptions: v Restoring the serial number of the system unit on page 52
v Retaining the UUID v Reading or writing the ECA information
Restoring the serial number of the system unit
When the computer was manufactured, the EEPROM on the system board was loaded with the serial numbers of the system and all major components. These numbers need to remain the same throughout the life of the computer. If you replace the system board, you must restore the serial number of the system unit to its original value. Before replacing the system board, save the original serial number by doing the following: 1. Install the ThinkPad Hardware Maintenance Diskette Version 1.73 or later, and restart the computer. 2. From the main menu, select 1. Set System Identification. 3. Select 2. Read S/N data from EEPROM. The serial number of each device in your computer is displayed; the serial number of the system unit is listed as follows: v 20: Serial number Write down that number. Note: The serial number of the system unit is also written on the label attached to the bottom of the computer. After you have replaced the system board, restore the serial number by doing the following: 1. Install the ThinkPad Hardware Maintenance Diskette Version 1.73 or later and restart the computer. 2. From the main menu, select 1. Set System Identification. 3. Select 1. Add S/N data from EEPROM. Follow the instructions on the screen.

Retaining the UUID

The Universally Unique Identifier (UUID) is a 128-bit number uniquely assigned to your computer at production and stored in the EEPROM of your system board. The algorithm that generates the number is designed to provide unique IDs until the year A.D. 3400. No two computers in the world have the same number. When you replace the system board, you must set the UUID on the new system board as follows: 1. Install the ThinkPad Hardware Maintenance Diskette Version 1.73 or later, and restart the computer. 2. From the main menu, select 4. Assign UUID. A new UUID is created and written. If a valid UUID already exists, it is not overwritten.
Reading or writing the ECA information
Information on Engineering Change Announcements (ECA) are stored in the EEPROM of the system board. The electronic storage of this information simplifies the procedure to check if the ECA has been previously applied to a machine. The machine does not need to be disassembled to check for the ECA application.
To check what ECAs have been previously applied to the machine, use the ECA Information Read/Write function on the ThinkPad Hardware Maintenance Diskette Version 1.73 or later. 1. Insert the ThinkPad Hardware Maintenance Diskette Version 1.73 or later, and restart the computer. 2. From the main menu, select 6. Set ECA Information. 3. To read ECA information, select 2. Read ECA/rework number from EEPROM and follow the instruction. 4. To read box build date, select 5. Read box build date from EEPROM, and follow the instruction on the screen. After an ECA has been applied to the machine, the EEPROM must be updated to reflect the ECA's application. Use the ThinkPad Hardware Maintenance Diskette Version 1.73 or later to update the EEPROM. Note: Only the ECA number is stored in the EEPROM. The machine type of the ECA is assumed be the same as the machine type of the machine that had the ECA applied to it. 1. Insert the ThinkPad Hardware Maintenance Diskette Version 1.73 or later, and restart the computer. 2. From the main menu, select 6. Set ECA Information. 3. To write ECA information, select 1. Write ECA/rework number from EEPROM, and follow the instruction. 4. To write box build date, select 4. Write box build date from EEPROM, and follow the instruction on the screen. If the system board is being replaced, try to read the ECA information from the old system board and transfer the information to the new system. If the system board is inoperable, this will not be possible.

Torque 0.167 Nm (1.7 kgfcm) 0.167 Nm (1.7 kgfcm) 0.167 Nm (1.7 kgfcm)
When installing: Make sure that the connectors are attached firmly.
1080 Keyboard bezel for X60 Tablet
Screw (quantity) Mmm, wafer-head, nylon-coated (8) Mmm, wafer-head, nylon-coated (4) Mmm, flat-head, nylon-coated (1)

Color Black Silver Black

1090 Palm rest for X61 Tablet

Step 1 2

Screw (quantity) Mmm, wafer-head, nylon-coated (6) Mmm, flat-head, nylon-coated (1)

Color Black Black

Torque 0.167 Nm (1.7 kgfcm) 0.167 Nm (1.7 kgfcm)
When installing: Attach each latch on the left top edge and on the right top edge of the palm rest at first, and attach the front edge of the palm rest to the frame.
1100 Keyboard bezel for X61 Tablet
Screw (quantity) Mmm, wafer-head, nylon-coated (2) Mmm, wafer-head, nylon-coated (4)

Color Black Silver

1110 Modem daughter card (MDC-1.5)
For access, remove these FRUs in order: v 1010 Battery pack on page 55 v 1050 Keyboard on page 62 v 1080 Keyboard bezel for X60 Tablet on page 67 v 1090 Palm rest for X61 Tablet on page 68
Screw (quantity) M2 3.5 mm, wafer-head, nylon-coated (2)

Color Silver

In step 2 , remove the card by pulling the tab with your fingers in the direction shown by the arrow. (continued)
Turn the card over 3 , and detach the modem connector 4.
When installing: Make sure that the modem connector and the connector on the underside of the card are attached firmly.
1120 PCI Express Mini Card for wireless LAN
For access, remove these FRUs in order: v 1010 Battery pack on page 55 v 1050 Keyboard on page 62 v 1080 Keyboard bezel for X60 Tablet on page 67 v 1090 Palm rest for X61 Tablet on page 68 In step 1a and 1b , unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the connectors with your fingers and gently unplug them in direction of the arrow.
When installing: Plug the gray cable 1a into the jack labeled MAIN on the card, and the black cable 1b into the jack labeled AUX. If the computer you are servicing has three cables, put the white cable in the cable bag in the card slot.
1130 PCI Express Mini Card for wireless WAN

1 2a 2b 1

In step 2a and 2b , unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the connectors with your fingers and gently unplug them in direction of the arrow. When installing: Plug the red cable 2a into the jack labeled MAIN on the card, and the blue cable 2b into the jack labeled AUX.
1140 Bluetooth daughter card (BDC-2)
Screw (quantity) M2.mm, wafer-head, nylon-coated (1)
When installing: Make sure that the Bluetooth connector is attached firmly.
1150 DC-in connector and modem cable
For access, remove these FRUs in order: v 1010 Battery pack on page 55 v 1050 Keyboard on page 62 v 1080 Keyboard bezel for X60 Tablet on page 67 v 1090 Palm rest for X61 Tablet on page 68 v 1100 Keyboard bezel for X61 Tablet on page 71

In step 3 , detach the claws of the PC Card slot assembly, and remove the PC Card slot assembly in the direction of arrow 4.

2010 LCD front bezel

Screw cap
Screw (quantity) M2.mm, wafer-head, nylon-coated (6)
(thin) 2 (thick) 3 M2.mm, wafer-head, nylon-coated (1) Black M2.mm, wafer-head, nylon-coated (2) Black
When installing: Make sure that the connector is attached firmly.

2020 Center latch

For access, remove these FRUs in order: v 1010 Battery pack on page 55 v 2010 LCD front bezel on page 91

2030 Fingerprint reader

For access, remove these FRUs in order: v 1010 Battery pack on page 55 v 2010 LCD front bezel on page 91 Note: Fingerprint reader is attached underside of the LCD front bezel.

2040 Inverter card

When installing: Make sure that connectors 4 , 5 , and 6 are attached firmly.
2050 Micro processor board
2060 Hinge and microphone cable
For access, remove these FRUs in order: v 1010 Battery pack on page 55 v 1040 Hinge caps on page 60 v 1050 Keyboard on page 62 v 1080 Keyboard bezel for X60 Tablet on page 67 v 1090 Palm rest for X61 Tablet on page 68 v 1100 Keyboard bezel for X61 Tablet on page 71 v 1120 PCI Express Mini Card for wireless LAN on page 74 v 1130 PCI Express Mini Card for wireless WAN on page 75 v 1170 LCD assembly on page 80 v 1180 Pen switch assembly, Bluetooth cable, and base cover on page 83 v 2010 LCD front bezel on page 91 v 2020 Center latch on page 92 v 2040 Inverter card on page 94 v 2050 Micro processor board on page 95
Detach the hinge from the LCD rear cover, and gently pull the microphone cable and the other cables out through the guide hole in the hinge. Pull them all at once. As you pull them, be sure not to subject them to any tension, which could cause them to be damaged by the cable guides, or could break a wire.
2070 Micro processor board/inverter card FFC (flexible flat cable), LCD panel with digitizer, and LCD cable
For access, remove these FRUs in order: v 1010 Battery pack on page 55 v 1040 Hinge caps on page 60 v 1050 Keyboard on page 62 v 1080 Keyboard bezel for X60 Tablet on page 67 v 1090 Palm rest for X61 Tablet on page 68 v 1100 Keyboard bezel for X61 Tablet on page 71 v 1120 PCI Express Mini Card for wireless LAN on page 74 v 1130 PCI Express Mini Card for wireless WAN on page 75 v 1170 LCD assembly on page 80 v 1180 Pen switch assembly, Bluetooth cable, and base cover on page 83 v 2010 LCD front bezel on page 91 v 2020 Center latch on page 92 v 2040 Inverter card on page 94 v 2050 Micro processor board on page 95 v 2060 Hinge and microphone cable on page 96 Note: The Micro processor board/inverter card FFC is under the LCD panel, and the LCD cable is attached to the LCD panel.
Screw (quantity) M2 3.5 mm, wafer-head, nylon-coated (1) M2 3.5 mm, flat-head, nylon-coated (4)

42W2541

AC adapters

FRU P/N RoHS ID CRU ID

2-pin (65 W, 20 V) adapter (models CTO, xxE, xxF, xxJ, xxL, xxP, xxS, xxY, xxU) ASTEC Delta Lite-On 92P1214 92P1155 92P1159 R R R * * *
3-pin (65W, 20 V) adapter (models CTO, xxA, xxB, xxC, xxG, xxH, xxK, xxM, xxT, xxV) OP ASTEC Delta Lite-On 92P1212 92P1153 92P1157 R R R * * *

Common parts list

Tool Screwdriver kit Removal tool antenna RF connector USB 2.0 CD-RW/DVD-ROM combo drive II USB cable USB floppy diskette drive for maintenance diskette USB floppy diskette drive tool kit Test card for integrated Smart Card P/N 95F3598 08K7159 40Y8687 40Y8704 05K9283 27L3452 42W7820
ThinkPad Hardware Maintenance Diskette Version 1.73 or later Note: Download the file from the following Web site: http://www.lenovo.com/ spm

Power cords

A ThinkPad power cord for a specific country or region is usually available only in that country or region: For 2-pin power cords:
Region Argentina, Uruguay, Paraguay Brazil Canada, U.S. Japan P/N (Longwell) 42T5020 42T5180 42T5008 42T5014 P/N (Volex) RoHS ID 42T5105 42T5183 42T5093 42T5099 R CRU ID *

For 3-pin power cords:

Region Australia, New Zealand Bangladesh, South Africa, Sri Lanka China Denmark Europe Hong Kong S.A.R. of China, U.K. India Israel Italy Korea Philippine, Saudi Arabia, Thailand Switzerland Taiwan P/N (Longwell) 42T5050 42T5056 42T5065 42T5041 42T5029 42T5035 42T5083 42T5062 42T5047 42T5077 42T5004 42T5044 42T5071 P/N (Volex) RoHS ID 42T5135 42T5141 42T5150 42T5126 42T5114 42T5120 42T5168 42T5147 42T5132 42T5162 42T5089 42T5129 42T5156 R CRU ID *

Notices

Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the users responsibility to evaluate and verify the operation of any other product, program, or service. Lenovo may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to: Lenovo (United States), Inc. 1009 Think Place - Building One Morrisville, NC 27560 U.S.A. Attention: Lenovo Director of Licensing LENOVO PROVIDES THIS PUBLICATION AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk. Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been

doc1

Introduction

Important service information
Important BIOS and device driver fixes are customer-installable. The BIOS and device drivers are posted on the customer support site http://www.lenovo.com/ support Advise customers to contact the Customer Support Center at 800-426-7378 if they need assistance in obtaining or installing any software fixes, drivers, and BIOS downloads. Customers in Canada should call the Customer Support Center at 800-565-3344 for assistance or download information.
Strategy for replacing FRUs
Before replacing parts Make sure that all software fixes, drivers, and BIOS downloads are installed before replacing any FRUs listed in this manual. After a system board is replaced, ensure that the latest BIOS is loaded to the system board before completing the service action. To download software fixes, drivers, and BIOS, do as follows: 1. Go to http://www.lenovo.com/support 2. Enter the product number of the computer or press Auto-detect button on the screen. 3. Select Downloads and drivers. 4. Follow the directions on the screen and install the necessary software. Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: v If you are instructed to replace a FRU but the replacement does not correct the problem, reinstall the original FRU before you continue. v Some computers have both a processor board and a system board. If you are instructed to replace either the processor board or the system board, and replacing one of them does not correct the problem, reinstall that board, and then replace the other one. v If an adapter or a device consists of more than one FRU, any of the FRUs may be the cause of the error. Before replacing the adapter or device, remove the FRUs, one by one, to see if the symptoms change. Replace only the FRU that changed the symptoms.
Attention: The setup configuration on the computer you are servicing may have been customized. Running Automatic Configuration may alter the settings. Note the current configuration settings (using the View Configuration option); then, when service has been completed, verify that those settings remain in effect.
Strategy for replacing a hard disk drive
Always try to run a low-level format before replacing a hard disk drive. This will cause all customer data on the hard disk to be lost. Be sure that the customer has a current backup of the data before doing this task. Attention: The drive startup sequence in the computer you are servicing may have been changed. Be extremely careful during write operations such as copying, saving, or formatting. If you select an incorrect drive, data or programs can be overwritten.

Prima di rimuovere qualsiasi FRU, spegnere il sistema, scollegare dalle prese elettriche tutti i cavi di alimentazione, rimuovere la batteria e poi scollegare i cavi di interconnessione.
Antes de quitar una FRU, apague el sistema, desenchufe todos los cables de las tomas de corriente elctrica, quite la batera y, a continuacin, desconecte cualquier cable de conexin entre dispositivos.

Safety information

The following section presents safety information with which you need to be familiar before you service a ThinkPad computer.

General safety

Follow these rules to ensure general safety: v Observe good housekeeping in the area of the machines during and after maintenance. v When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet. 3. Use a slow lifting force. Never move suddenly or twist when you attempt to lift. 4. Lift by standing or by pushing up with your leg muscles; this action removes the strain from the muscles in your back. Do not attempt to lift any object that weighs more than 16 kg (35 lb) or that you think is too heavy for you. v Do not perform any action that causes hazards to the customer, or that makes the equipment unsafe. v Before you start the machine, make sure that other service representatives and the customers personnel are not in a hazardous position. v Place removed covers and other parts in a safe place, away from all personnel, while you are servicing the machine. v Keep your toolcase away from walk areas so that other people will not trip over it. v Do not wear loose clothing that can be trapped in the moving parts of a machine. Make sure that your sleeves are fastened or rolled up above your elbows. If your hair is long, fasten it. v Insert the ends of your necktie or scarf inside clothing or fasten it with a nonconductive clip, about 8 centimeters (3 inches) from the end. v Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for your clothing. Attention: Metal objects are good electrical conductors. v Wear safety glasses when you are hammering, drilling, soldering, cutting wire, attaching springs, using solvents, or working in any other conditions that might be hazardous to your eyes. v After service, reinstall all safety shields, guards, labels, and ground wires. Replace any safety device that is worn or defective. v Reinstall all covers correctly before returning the machine to the customer. v Fan louvers on the machine help to prevent overheating of internal components. Do not obstruct fan louvers or cover them with labels or stickers.

Handling devices that are sensitive to electrostatic discharge
Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD.) ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge.
Notes 1. Use product-specific ESD procedures when they exceed the requirements noted here. 2. Make sure that the ESD protective devices you use have been certified (ISO 9000) as fully effective. When handling ESD-sensitive parts: v Keep the parts in protective packages until they are inserted into the product. v Avoid contact with other people while handling the part. v Wear a grounded wrist strap against your skin to eliminate static on your body. v Prevent the part from touching your clothing. Most clothing is insulative and retains a charge even when you are wearing a wrist strap. v Use the black side of a grounded work mat to provide a static-free work surface. The mat is especially useful when handling ESD-sensitive devices. v Select a grounding system, such as those listed below, to provide protection that meets the specific service requirement.
Note The use of a grounding system to guard against ESD damage is desirable but not necessary. Attach the ESD ground clip to any frame ground, ground braid, or green-wire ground. When working on a double-insulated or battery-operated system, use an ESD common ground or reference point. You can use coax or connector-outside shells on these systems. Use the round ground prong of the ac plug on ac-operated computers.

Grounding requirements

Electrical grounding of the computer is required for operator safety and correct system function. Proper grounding of the electrical outlet can be verified by a certified electrician.
Laser compliance statement
Some models of ThinkPad computer are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products. Elsewhere, the drive is certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN for Class 1 laser products. If a CD-ROM drive, a DVD-ROM drive, or another laser device is installed, note the following:

Hibernation mode

In hibernation mode, the following occurs: v The system status, RAM, VRAM, and setup data are stored on the hard disk. v The system is powered off. Note: If the computer enters the hibernation mode while it is docked to the docking station, do not undock it before resuming normal operation. If you do undock it and then try to resume normal operation, you will get an error message, and you will have to restart the system. To cause the computer to enter hibernation mode, do any of the following: v Press the Fn+F12 keys. v If you are using the ACPI operating system and have defined one of the following actions as the event that causes the system to go into hibernation mode, perform that action. Closing the lid. Pressing the power button.
Pressing Fn+F4 keys. Also, the computer goes into hibernation mode automatically in either of the following conditions: v If a hibernation time has been set on the timer, and if the user does not do any operation with the keyboard, the TrackPoint, the hard disk drive, the parallel connector, or the diskette drive within that time. v If the timer conditions are satisfied in suspend mode. When the power is turned on, the computer returns from hibernation mode and resumes operation. The hibernation file in the boot record on the hard disk drive is read, and system status is restored from the hard disk drive.

Checkout guide

Use the following procedures as a guide in identifying and correcting problems with the ThinkPad computer. Note: The diagnostic tests are intended to test only ThinkPad products. The use of non-ThinkPad products, prototype cards, or modified options can lead to false indications of errors and invalid system responses. 1. Identify the failing symptoms in as much detail as possible. 2. Verify the symptoms. Try to re-create the failure by running the diagnostic test or by repeating the operation.

Testing the computer

The ThinkPad computer has a test program called PC-Doctor for DOS (hereafter called PC-Doctor). You can detect errors by running the diagnostics test included in PC-Doctor. This section is an overview of the procedure. For details that depend on model-unique functions, refer to Product overview on page 38. For some possible configurations of the computer, PC-Doctor might not run correctly. To avoid this problem, you need to initialize the computer setup by use of the BIOS Setup Utility before you run PC-Doctor. On the BIOS Setup Utility screen, press F9, Enter, F10, and then Enter. Note: When you initialize the computer configuration, some devices are disabled, such as the serial port. If you test one of these devices, you will need to enable it by using PS2.EXE. PC-Doctor cannot be used to test a device that is in the docking station, even if the computer supports the docking station. To test a USB device, connect it to the USB connector of the computer. To test the Ultrabay device, install it in the Ultrabay Slim slot of the computer.

1. Remove the daughter card that you installed. 2. System board. 1. Remove the WAN card that you installed. 2. System board.
Symptom or error 1805 Unauthorized Wireless USB card is plugged inPower off and remove the Wireless USB card. 1810 Hard disk partition layout error. FRU or action, in sequence 1. Remove the Wireless USB card that you installed. 2. System board. 1. If the Access Predesktop Area has been previously disabled, then go to the BIOS Setup Utility by pressing F1 to open the BIOS Setup Utility. Select Security --> Predesktop Area --> Access Predesktop Area. Set this item to Disabled. Save and exit. 2. If the Access Predesktop Area has not been previously disabled, press Enter to load Access Predesktop Area. Then run RECOVER TO FACTORY CONTENTS in Access Predesktop Area. 3. If item 2 failed, press F3 in the Welcome screen in RECOVER TO FACTORY CONTENTS. Run FDISK, and then delete all partitions. Run RECOVER TO FACTORY CONTENTS in Access Predesktop Area again. 4. If item 3 failed, select CD-ROM boot in Startup in Access Predesktop Area. Boot from the Recovery CD and perform full recovery from it. 5. If item 4 failed, replace the hard disk drive. Remove all but the reader that you set up for the authentication.
1820 More than one external fingerprint reader is attached. Power off and remove all but the reader that you set up within your main operating system. 1830 Invalid memory configurationPower off and install a memory module to Slot-0 or the lower slot. 2000 Hard Drive Active Protection sensor diagnostics failed. Press <Esc> to continue. Press <F1> to enter SETUP
Install DIMM in Slot-0, but not in Slot-1. Note: For the construction of the DIMM slot, see1040 DIMM on page 64. 1. Undock docking station or port replicator if it is attached to the ThinkPad computer, and place the computer on a horizontal surface. Do not apply any physical shock to the computer. 2. Run Diagnostics --> ThinkPad Devices --> HDD Active Protection Test.
Symptom or error 2010 Warning: Your internal hard disk drive (HDD) may not function correctly on this system. Ensure that your HDD is supported on this system and that the latest HDD firmware is installed. FRU or action, in sequence Inform the following information to the customer: If in the primary bay the customer is using a non-IBM or non-Lenovo hard disk drive (HDD), or an old generation IBM HDD which is not supported by this system, with the risk in mind, the customer can still use it by pressing ESC. If in the primary drive bay the customer is using a supported IBM/Lenovo HDD with an old firmware, the customer needs to update its firmware to the latest. The latest version is available at http://www.lenovo.com/support 1. Reseat the hard disk drive. 2. Main hard disk drive. 3. System board. 1. Reseat the hard disk drive. 2. Ultrabay hard disk drive. 3. System board.

Bottom

Torque 0.1372 Nm (1.4 kgfcm)
When installing: Do not damage the wireless micro switch 1 on the system board.

1210 Fansink

For access, remove following FRUs, in order: v 1010 Battery pack on page 60 v 1020 Hard disk drive (2.5-inch) and HDD rubber rails on page 61 v 1030 DIMM cover on page 63 v 1050 Keyboard on page 65 v 1060 Upper case on page 69 v 1080 Hard disk (1.8-inch) on page 73 v 1090 Hard disk housing (1.8-inch) on page 74 v 1100 Wireless WAN PCI Express Mini card on page 75 v 1120 Wireless LAN PCI Express Mini card on page 78 v 1130 MDC on page 81 v 1150 Second Fan on page 83 v 1160 Speaker on page 84 v 1170 DC-in and RJ-11 connectors on page 85 v 1180 LCD assembly on page 86 v 1190 Hard disk sub-card on page 92 v 1200 System board and lower case assembly with label on page 93 For models with LV processor

3b 2 3a 1 3c 4

For models with NV processor

3c 2 3a 1 3b 4

Step 2 3
Screw (quantity) M2 3.5 mm, wafer-head, nylon-coated (1) M2 7.5 mm, flat-head, spring-loaded, (3)
Torque 0.196 Nm (2 kgfcm) 0.245 Nm (2.5 kgfcm)
Note: Remove the fansink screws in the order shown: 3a , 3b , and 3c.

2010 LCD bezel

For access, remove following FRUs, in order: v 1010 Battery pack on page 60 v 1050 Keyboard on page 65 v 1060 Upper case on page 69 v 1100 Wireless WAN PCI Express Mini card on page 75 v 1120 Wireless LAN PCI Express Mini card on page 78 v 1170 DC-in and RJ-11 connectors on page 85 v 1180 LCD assembly on page 86 For SPWG LCD
Screw (quantity) M2.mm, wafer-head, nylon-coated (3)
Torque 0.294 Nm (3 kgfcm)
Note: The adhesive on the bezel can make bezel removal difficult. (continued)
When installing: The replacement bezel should have adhesive pre-applied; therefore, remove the covering from the bezel to expose the adhesive, and then place the top edge under the frame, then push the bezel down and secure with the latches firmly. Be careful to route the antenna cables properly. For TMD LCD
Screw (quantity) M2 2.5 mm, wafer-head, nylon-coated (4) M2.mm, wafer-head, nylon-coated (3)
Torque 0.1568 Nm (1.6 kgfcm) 0.294 Nm (3 kgfcm)
Note: The adhesive on the bezel can make bezel removal difficult.
When installing: The replacement bezel should have adhesive pre-applied; therefore, remove the covering from the bezel to expose the adhesive, and then place the top edge under the frame, then push the bezel down and secure with the latches firmly. Be careful to route the antenna cables properly.

No. 10 FRU Hard disk drive, 100GB, SATA, 5400rpm, 2.5-inch v 1702-CTO, 5Nx, 68x, 6Cx, 76x, 5Px, 77x, 5Qx v 1703-CTO v 1704-CTO, 69x v 1705-CTO v 2507-CTO v 2508-CTO v 2533-CTO v 1706-CTO, 69x, 6Bx, 8Gx, 8Hx v 1707-CTO v 1708-CTO v 1709-CTO, 97x v 2509-CTO v 2510-CTO Hitachi Toshiba Fujitsu 39T2707 39T2715 39T2643 R R R * * * FRU no. RoHS ID CRU ID
No. 10 FRU Hard disk drive, 100GB, SATA, 7200rpm, 2.5-inch v 1702-CTO, 78x, 5Rx v 1703-CTO v 1704-CTO v 1705-CTO v 2507-CTO v 2508-CTO v 2533-CTO v 1706-CTO, 8Jx v 1707-CTO v 1708-CTO v 1709-CTO v 2509-CTO v 2510-CTO v 7666-CTO, 3Ax, B4x v 7667-CTO v 7668-CTO v 7669-CTO, 45x, 3Hx v 7670-CTO v 7671-CTO v 7673-CTO, 4Jx, 7Jx, 4Mx, 9Fx, 9Gx, A4x v 7674-CTO v 7675-CTO v 7676-CTO v 7678-CTO v 7679-CTO v 7673-CTO v 7674-CTO v 7675-CTO, H7x v 7676-CTO Hitachi Seagate HGST 42T1403 39T2799 42T1485 R R R * * * FRU no. RoHS ID CRU ID
Hard disk drive, 120GB, SATA, 5400rpm, 2.5-inch v 1702-CTO v 1703-CTO v 1704-CTO v 1705-CTO v 2507-CTO v 2508-CTO v 1706-CTO v 1707-CTO v 1708-CTO v 1709-CTO v 2509-CTO v 2510-CTO v 7666-CTO, 36x, 86x, 7Gx, 38x, 73x, 43x, 55x, 8Ax, 8Dx, 3Dx, 3Ex, 59x, B5x, B6x v 7667-CTO, 36x, 3Ex v 7668-CTO, 7Gx, 38x, 44x, 58x, 8Gx, 8Hx v 7669-CTO, 85x, 46x, 27x, 49x, 29x, 4Ax, 4Bx v 7670-CTO v 7671-CTO v 7673-CTO, 54x, 78x, 79x, 7Ax, 7Gx, 7Bx, 47x, 75x, 45x, 46x, 4Gx, 76x, 4Nx, 5Dx, 4TU, 82x, 83x, 84x, 85x, 88x, 89x, 8Ax, 8Bx, 8Hx, 8Kx v 7674-CTO, 4Nx v 7675-CTO, 49x, 4Ax, 4Bx, 4Cx, 28x, 48x, 75x, 4Kx, 7Kx, 8Mx, 8Nx, 8Px, 8Sx v 7676-CTO, 88x, 89x v 7678-CTO v 7679-CTO v 7673-CTO, H3x, H4x, H6x, H8x, H9x, HCx, HHx, HJx v 7674-CTO v 7675-CTO, H6x v 7676-CTO, H5x, J3x HGST Fujitsu Seagate HGST 42T1417 39T2889 42T1307 42T1499 R R R * * *
Hard disk drive, 160GB, SATA, 5400rpm, 2.5-inch v 7666-CTO, 47x, 8Ex, 84x, 8Jx, A4x, A5x, A8x, A9x, AAx, E3x v 7667-CTO v 7668-CTO, 87x v 7669-CTO, 88x v 7670-CTO v 7671-CTO v 7673-CTO, 4Dx, 4Lx, 7Cx, 7Dx, 7Ex, 7Hx, 5Ax, 5Bx, 86x, 87x, 97x, 98x, 99x, 9Dx, A3x v 7674-CTO v 7675-CTO, 3Jx, 7Fx, 55x, 59x, 5Ax, 5Bx, 92x, 8Rx v 7676-CTO, 56x, 4Fx, 57x, 58x, 5Cx, 5Ex v 7678-CTO v 7679-CTO v 7673-CTO, HAx, HBx, HFx, HGx, J3x, J6x, J7x v 7674-CTO v 7675-CTO, H8x, J2x, J5x, J7x, J8x, J9x, K2x v 7676-CTO, K3x, J4x HGST Seagate Fujitsu Hard disk drive, 160GB, SATA, 7200rpm, 2.5-inch v 7666-CTO v 7667-CTO v 7668-CTO v 7669-CTO v 7673-CTO v 7674-CTO v 7675-CTO v 7676-CTO v 7673-CTO, HFx, J2x, JAx, JBx, JEx, JGx, K1x, K3x, K4x v 7674-CTO v 7675-CTO v 7676-CTO, K1x, K2x Seagate HGST Hard disk drive, 160GB, SATA, 7200rpm, 2.5-inch, Seagate v 7673-CTO, J5x v 7675-CTO v 7676-CTO 42T1439 42T1461 42T1311 R R R * * * 42T1501 42T1309 39T2899 R R R * * *

No. 16 FRU Intel PRO Wireless 3945ABG PCI Express Mini Card US/CAN/LA/ANZ/AP/India/Hong Kong 42T0853 S.A.R./Taiwan v 7666-CTO, 63x, 26x, 86x, 47x, 7Mx, 74x, 75x, 7Px, 77x, 78x, 24x, 7Gx, 38x, 8Ex, 73x, 76x, 64x, 83x, 43x, 8Ax, 8Bx, 8Cx, 8Dx, 3Cx, 3Dx, 93x, 94x for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7667-CTO for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7668-CTO, 24x, 7Gx, 38x, 65x, 44x, 25x, 93x, 94x for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7669-CTO, 7Fx, 37x, 56x, 45x, 7Dx, 88x, 85x, 27x, 49x, 29x, 4Ax for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7670-CTO for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7671-CTO for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7673-CTO, 4Hx, 53x, 54x, 7Gx, 24x, 4Dx, 4Lx, 3Fx, 3Gx, 4Gx, 3Hx, 7Ex, 3Kx, 5Ax, 5Bx, 5Dx, 4Tx for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7674-CTO, 65x, 74x for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7675-CTO, 26x, 34x, 37x, 3Ax, 3Dx, 27x, 3Jx, 48x, 29x, 55x, 3Mx, 4Kx, 59x, 34x, 3Ax, 27x, 3Jx, 48x, 29x, 55x, 3Mx, 4Kx, 59x, 5Ax, 5Bx for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7676-CTO, 56x, 3HX, 57x, 58x, 4Px, 5Ex for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7678-CTO for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7679-CTO for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7673-CTO, HJx, JDx, JGx for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7674-CTO, J2x for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7675-CTO, HBx, JCx, J9x for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7676-CTO for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV R ** FRU no. RoHS ID CRU ID
No. 16 FRU Intel PRO Wireless 3945ABG PCI Express Mini Card EMEA 42T0855 v 1702-CTO, 3Jx, 3Qx, 4Ex, 37x, 55x, 5Px for xxG v 1703-CTO, 37x, 3Jx, 3Qx for xxG v 1704-CTO, 4Cx, 56x, 5Lx, 6Ax for xxG v 1705-CTO, 4Cx, 5Hx for xxG v 2507-CTO v 2508-CTO v 2533-CTO v 1706-CTO, 8Gx for xxG v 1707-CTO, 5Dx, 5Kx for xxG v 1708-CTO, 7Dx, 95x, 8Cx for xxG v 1709-CTO for xxG v 2509-CTO v 2510-CTO v 1702-CTO, D6x, 3Wx, D8x, E7x, E8x, HCx, ELx, HGx, K4x, DCx, K5x, ENx, F9x, K6x, EPx for xxG v 1703-CTO, D6x, 3Wx, D8x, E7x for xxG v 1704-CTO, EAx, ECx, EFx, EGx, F4x, 7Mx, J8x, EKx, F8x, EMx, FAx for xxG v 1705-CTO, HHx, 7Kx, 7Lx, K7x, EKx, 7Nx, K9x for xxG v 2507-CTO for xxG v 2508-CTO for xxG v 1706-CTO, B5x, C9x, AXx, B8x, 5Vx, E5x, CHx, QFx, QDx, P4x, QAx, KKx, PFx, Q5x, KHx, P9x, QBx, PDx, BAx, Q9x, CJx, QEx, P5x, P6x for xxG v 1707-CTO, B5x, C9x, B8x, 5Vx for xxG v 1708-CTO, E4x, PBx, PCx, Q8x, Q9x, P8x, HBx, AWx, HEx, PHx, KMx for xxG v 1709-CTO, HDx, KHx, Q4x, HAx, KJx, PEx, QCx, Pax, PGx, QGx, KLx for xxG v 2509-CTO for xxG v 2510-CTO for xxG v 7666-CTO, 63x, 26x, 86x, 47x, 7Mx, 74x, 75x, 7Px, 77x, 78x, 24x, 7Gx, 38x, 8Ex, 73x, 76x, 64x, 83x, 43x, 8Ax, 8Bx, 8Cx, 8Dx, 3Cx, 3Dx, 93x, 94x for xxG v 7667-CTO for xxG v 7668-CTO, 24x, 7Gx, 38x, 65x, 44x, 25x, 93x, 94x for xxG v 7669-CTO, 7Fx, 37x, 56x, 45x, 7Dx, 88x, 85x, 27x, 49x, 29x, 4Ax for xxG v 7670-CTO for xxG v 7671-CTO for xxG v 7673-CTO, 4Hx, 53x, 54x, 7Gx, 24x, 4Dx, 4Lx, 3Fx, 3Gx, 4Gx, 3Hx, 7Ex, 3Kx, 5Ax, 5Bx for xxG v 7674-CTO, 65x, 74x for xxG v 7675-CTO, 26x, 34x, 37x, 3Ax, 3Dx, 27x, 3Jx, 48x, 29x, 55x, 3Mx, 4Kx, 59x, 34x, 3Ax, 27x, 3Jx, 48x, 29x, 55x, 3Mx, 4Kx, 59x, 5Ax, 5Bx for xxG v 7676-CTO, 56x, 3HX, 57x, 58x, 4Px for xxG (continued) R ** FRU no. RoHS ID CRU ID

No. 16 FRU Intel PRO Wireless 3945ABG PCI Express Mini Card EMEA v 7678-CTO v 7679-CTO v 7673-CTO v 7674-CTO v 7675-CTO v 7676-CTO 42T0855 for for for for for for xxG xxG xxG xxG xxG xxG R ** R ** FRU no. RoHS ID CRU ID
China/Korea 42T0857 v 1702-CTO, 3Jx, 3Qx, 49x, 4Ex, 37x, 4Fx, 58x, 5Jx, 84x, 85x, 36x, 3Fx, 5Mx, 86x, 38x, 5Gx, 3Rx, 3Kx, 75x, 77x, 78x, 5Qx, 5Rx, 87x, 39x, 23x, 25x, 73x, 3Hx, 3Cx, 3Nx, 5Kx, 83x, 5Dx, 53x, 57x, 5Sx for xxC, xxK v 1703-CTO, 37x, 3Jx, 3Qx for xxC, xxK v 1704-CTO v 1705-CTO, 3Qx, 5Ax, 5Hx, 3Ux, 3Gx, 85x, 5Ex, 5Dx, 53x for xxC, xxK v 2507-CTO v 2508-CTO v 2533-CTO v 1706-CTO, 5Dx, 5Kx, 7Fx, 5Cx, 86x, 5Bx, 5Gx, 89x, 8Ex, 8Dx, 5Lx, 48x, 8Fx, 8Hx, 8Jx, 88x, 84x, 44x, 47x, 33x, 34x for xxC, xxK v 1707-CTO, 5Dx, 5Kx for xxC, xxK v 1708-CTO for xxC, xxK v 1709-CTO, 86x, 8Cx, 5Lx, 5Nx, 5Ax, 5Ex, 45x, 89x, 84x, 85x for xxC, xxK v 2509-CTO v 2510-CTO v 1702-CTO, D6x, 3Wx, D8x, E7x, E5x, EEx, HAx, HDx, HEx, ELx, HGx, K4x, DCx, K5x, ENx, F9x, K6x, EPx for xxC, xxK v 1703-CTO, D6x, 3Wx, D8x, E7x for xxC, xxK v 1704-CTO, 7Mx, J8x, EKx, F8x, EMx, FAx for xxC, xxK v 1705-CTO, DBx, 89x, D7x, D9x, Dax, 3Xx, HHx, 7Kx, 7Lx, K7x, EKx, 7Nx, K9x for xxC, xxK v 2507-CTO for xxC, xxK v 2508-CTO for xxC, xxK v 1706-CTO, B5x, C9x, B8x, 5Vx, C6x, CDx, CFx, GBx, GCx, G7x, E5x, CHx, QFx, QDx, P4x, QAx, KKx, PFx, Q5x, KHx, P9x, QBx, PDx, BAx, Q9x, CJx, QEx, P5x, P6x for xxC, xxK v 1707-CTO, B5x, C9x, B8x, 5Vx for xxC, xxK v 1708-CTO, PBx, PCx, Q8x, Q9x, P8x, HBx, AWx, HEx, PHx, KMx for xxC, xxK v 1709-CTO, C6x, ATx, 5Sx, C4x, B6x, CAx, B9x, HDx, KHx, Q4x, HAx, KJx, PEx, QCx, Pax, PGx, QGx, KLx for xxC, xxK v 2509-CTO for xxC, xxK v 2510-CTO for xxC, xxK (continued)
No. 16 FRU Intel PRO Wireless 3945ABG PCI Express Mini Card China/Korea 42T0857 v 7666-CTO, 63x, 26x, 86x, 47x, 7Mx, 74x, 75x, 7Px, 77x, 78x, 24x, 7Gx, 38x, 8Ex, 73x, 76x, 64x, 83x, 43x, 8Ax, 8Bx, 8Cx, 8Dx, 3Cx, 3Dx, 93x, 94x, 59x for xxC, xxK v 7667-CTO for xxC, xxK v 7668-CTO, 24x, 7Gx, 38x, 65x, 44x, 25x, 93x, 94x, 8Fx, 8Gx, 58x for xxC, xxK v 7669-CTO, 7Fx, 37x, 56x, 45x, 7Dx, 88x, 85x, 27x, 49x, 29x, 4Ax for xxC, xxK v 7670-CTO for xxC, xxK v 7671-CTO for xxC, xxK v 7673-CTO, 4Hx, 53x, 54x, 7Gx, 24x, 4Dx, 4Lx, 3Fx, 3Gx, 4Gx, 3Hx, 7Ex, 3Kx, 5Ax, 5Bx, 82x, 83x, 8Bx for xxC, xxK v 7674-CTO, 65x, 74x for xxC, xxK v 7675-CTO, 26x, 34x, 37x, 3Ax, 3Dx, 27x, 3Jx, 48x, 29x, 55x, 3Mx, 4Kx, 59x, 34x, 3Ax, 27x, 3Jx, 48x, 29x, 55x, 3Mx, 4Kx, 59x, 5Ax, 5Bx, 8Lx, 8Mx, 8Kx for xxC, xxK v 7676-CTO, 56x, 3HX, 57x, 58x, 4Px for xxC, xxK v 7678-CTO for xxC, xxK v 7679-CTO for xxC, xxK v 7673-CTO for xxC, xxK v 7674-CTO for xxC, xxK v 7675-CTO, H4x, H6x, HCx for xxC, xxK v 7676-CTO for xxC, xxK Japan v 1702-CTO, 3Jx, 3Qx, 37x, 95x, 98x, C6x, 96x, 99x, C4x, C5x, C7x for xxJ, xxE v 1703-CTO, 37x, 3Jx, 3Qx for xxJ, xxE v 1704-CTO v 1705-CTO v 2507-CTO v 2508-CTO v 2533-CTO v 1706-CTO, 5Dx, 5Kx, 44x, 47x, 33x, 34x for xxJ, xxE v 1707-CTO, 5Dx, 5Kx for xxJ, xxE v 1708-CTO for xxJ, xxE v 1709-CTO for xxJ, xxE v 2509-CTO v 2510-CTO (continued) 42T0859 R ** FRU no. RoHS ID CRU ID

No. 16 FRU Intel PRO Wireless 3945ABG PCI Express Mini Card Japan 42T0859 v 1702-CTO, D6x, 3Wx, D8x, E7x, 7Dx, 7Ex, ELx, HGx, K4x, DCx, K5x, ENx, F9x, K6x, EPx for xxJ, xxE v 1703-CTO, D6x, 3Wx, D8x, E7x for xxJ, xxE v 1704-CTO, 7Mx, J8x, EKx, F8x, EMx, FAx for xxJ, xxE v 1705-CTO, 7Dx, 7Ex, HHx, 7Kx, 7Lx, K7x, EKx, 7Nx, K9x for xxJ, xxE v 2507-CTO for xxJ, xxE v 2508-CTO for xxJ, xxE v 1706-CTO, B5x, C9x, B8x, 5Vx, E5x, CHx, QFx, QDx, P4x, QAx, KKx, PFx, Q5x, KHx, P9x, QBx, PDx, BAx, Q9x, CJx, QEx, P5x, P6x for, xxJ, xxE v 1707-CTO, B5x, C9x, B8x, 5Vx for, xxE, xxJ v 1708-CTO, PBx, PCx, Q8x, Q9x, P8x, HBx, AWx, HEx, PHx, KMx for xxE, xxJ v 1709-CTO, HDx, KHx, Q4x, HAx, KJx, PEx, QCx, Pax, PGx, QGx, KLx for xxE, xxJ v 2509-CTO for xxE, xxJ v 2510-CTO for xxE, xxJ v 7666-CTO, 63x, 26x, 86x, 47x, 7Mx, 74x, 75x, 7Px, 77x, 78x, 24x, 7Gx, 38x, 8Ex, 73x, 76x, 64x, 83x, 43x, 8Ax, 8Bx, 8Cx, 8Dx, 3Cx, 3Dx, 93x, 94x for xxE, xxJ v 7667-CTO for xxE, xxJ v 7668-CTO, 24x, 7Gx, 38x, 65x, 44x, 25x, 93x, 94x for xxE, xxJ v 7669-CTO, 7Fx, 37x, 56x, 45x, 7Dx, 88x, 85x, 27x, 49x, 29x, 4Ax for xxE, xxJ v 7670-CTO for xxE, xxJ v 7671-CTO for xxE, xxJ v 7673-CTO, 4Hx, 53x, 54x, 7Gx, 24x, 4Dx, 4Lx, 3Fx, 3Gx, 4Gx, 3Hx, 7Ex, 3Kx, 5Ax, 5Bx for xxE, xxJ v 7674-CTO, 65x, 74x for xxE, xxJ v 7675-CTO, 26x, 34x, 37x, 3Ax, 3Dx, 27x, 3Jx, 48x, 29x, 55x, 3Mx, 4Kx, 59x, 34x, 3Ax, 27x, 3Jx, 48x, 29x, 55x, 3Mx, 4Kx, 59x, 5Ax, 5Bx for xxE, xxJ v 7676-CTO, 56x, 3HX, 57x, 58x, 4Px for xxE, xxJ v 7678-CTO for xxE, xxJ v 7679-CTO for xxE, xxJ v 7673-CTO for xxE, xxJ v 7674-CTO for xxE, xxJ v 7675-CTO for xxE, xxJ v 7676-CTO for xxE, xxJ R ** FRU no. RoHS ID CRU ID
No. 16 FRU Intel PRO Wireless 3945ABG PCI Express Mini Card a disabled 42T0861 v 1702-CTO, 3Jx, 3Qx, 4Ex, 37x, 3Dx, 3Cx, 3Mx, 38x, 35x, 23x, 25x, 73x, 5Sx for xxT v 1703-CTO, 37x, 3Jx, 3Qx for xxT v 1704-CTO v 1705-CTO v 2507-CTO v 2508-CTO v 2533-CTO v 1706-CTO, 5Dx, 5Kx, 7Fx, 59x, 58x, 5Fx, 5Hx, 55x, 44x, 47x, 33x, 34x for xxT v 1707-CTO, 5Dx, 5Kx for xxT v 1708-CTO for xxT v 1709-CTO for xxT v 2509-CTO v 2510-CTO v 1702-CTO, D6x, 3Wx, D8x, E7x, ELx, HGx, K4x, DCx, K5x, ENx, F9x, K6x, EPx for xxT v 1703-CTO, D6x, 3Wx, D8x, E7x for xxT v 1704-CTO, 7Mx, J8x, EKx, F8x, EMx, FAx for xxT v 1705-CTO, HHx, 7Kx, 7Lx, K7x, EKx, 7Nx, K9x for xxT v 2507-CTO for xxT v 2508-CTO for xxT v 1706-CTO, B5x, C9x, B8x, 5Vx, C5x, E5x, CHx, QFx, QDx, P4x, QAx, KKx, PFx, Q5x, KHx, P9x, QBx, PDx, BAx, Q9x, CJx, QEx, P5x, P6x for xxT v 1707-CTO for xxT v 1708-CTO, PBx, PCx, Q8x, Q9x, P8x, HBx, AWx, HEx, PHx, KMx for xxT v 1709-CTO, HDx, KHx, Q4x, HAx, KJx, PEx, QCx, Pax, PGx, QGx, KLx for xxT v 2509-CTO for xxT v 2510-CTO for xxT v 7666-CTO, 63x, 26x, 86x, 47x, 7Mx, 74x, 75x, 7Px, 77x, 78x, 24x, 7Gx, 38x, 8Ex, 73x, 76x, 64x, 83x, 43x, 8Ax, 8Bx, 8Cx, 8Dx, 3Cx, 3Dx, 93x, 94x for xxT v 7667-CTO for xxT v 7668-CTO, 24x, 7Gx, 38x, 65x, 44x, 25x, 93x, 94x for xxT v 7669-CTO, 7Fx, 37x, 56x, 45x, 7Dx, 88x, 85x, 27x, 49x, 29x, 4Ax for xxT v 7670-CTO for xxT v 7671-CTO for xxT (continued) R ** FRU no. RoHS ID CRU ID

No. 16 FRU Intel Wireless WiFi Link 4965AGN (Japan) 42T0871 v 7666-CTO, 3Ax, 84x, 53x, 54x, 55x, 4Mx for xxJ v 7667-CTO for xxJ v 7668-CTO, 79x, 7Ax, 7Bx, 7Cx, 87x for xxJ v 7669-CTO, 35x, 46x for xxJ v 7670-CTO for xxJ v 7671-CTO for xxJ v 7673-CTO, 75x, 45x, 46x, 7Cx, 7Dx, 25x, 44x, 76x, 73x, 7Hx, 7Jx, 9Ex for xxJ v 7674-CTO for xxJ v 7675-CTO, 35x, 49x, 38x, 4Ax, 3Bx, 4Bx, 3Ex, 4Cx, 28x, 96x, 75x, 7Fx, 7Kx for xxJ v 7676-CTO, 35x, 4Fx, 3Lx, 3Px, 5Cx for xxJ v 7678-CTO for xxJ v 7679-CTO for xxJ v 7673-CTO, H3x, H4x, HHx, J2x, JEx for xxJ v 7674-CTO for xxJ v 7675-CTO, H9x, HAx, J4x, J5x, J6x, J7x, J8x for xxJ v 7676-CTO for xxJ (Korea) v 7666-CTO for xxK v 7667-CTO for xxK v 7668-CTO, 87x, A3x for xxK v 7669-CTO for xxK v 7673-CTO, 75x, 7Dx for xxK v 7674-CTO for xxK v 7675-CTO, 94x for xxK v 7676-CTO for xxK v 7673-CTO, H3x, H4x, HHx, J2x, JEx for xxJ v 7674-CTO for xxJ v 7675-CTO, H8x, J2x, J3x for xxJ v 7676-CTO for xxJ 42T0905 R ** FRU no. RoHS ID CRU ID
No. 16 FRU Intel Wireless WiFi Link 4965AGN 11n disabled (US/CAN/LA/AP) v 7666-CTO, 34x, 36x, 3Fx, 3Ex, 8Jx for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7667-CTO, 34x, 36x, 3Fx, 3Ex for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7668-CTO for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7669-CTO for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7670-CTO for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7671-CTO for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7673-CTO, 65x, 74x, 66x, 4Nx, 87x, 88x, 89x for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7674-CTO, 65x, 74x, 66x, 4Nx for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7675-CTO, 8Nx for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7676-CTO for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7678-CTO for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7679-CTO for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7673-CTO, HBx, HGx for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7674-CTO for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7675-CTO for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV v 7676-CTO for xxU, xxF, xxL, xxP, xxS, xxY, xxM, xxA, xxQ, xxB, xxH, xxV 11n disabled (EMEA) v 7666-CTO, 34x, 36x, 3Fx, 3Ex for xxG v 7667-CTO, 34x, 36x, 3Fx, 3Ex for xxG v 7668-CTO for xxG v 7669-CTO for xxG v 7670-CTO for xxG v 7671-CTO for xxG v 7673-CTO, 65x, 74x, 66x, 4Nx for xxG v 7674-CTO, 65x, 74x, 66x, 4Nx for xxG v 7675-CTO for xxG v 7676-CTO for xxG v 7678-CTO for xxG v 7679-CTO for xxG v 7673-CTO, H7x for xxG v 7674-CTO for xxG v 7675-CTO for xxG v 7676-CTO for xxG 42T0873 R ** FRU no. RoHS ID CRU ID

No. FRU PC Card slot mech Fan assembly, Ultra Low Voltage v 1702-CTO, 83x, 84x, 85x, 86x, 87x, 93x, 95x, 96x, 97x, 99x v 1703-CTO v 1704-CTO v 1705-CTO, 85x v 2507-CTO v 2508-CTO v 2533-CTO, B3x, B4x, B5x FRU no. 41W1093 41V9747 RoHS ID R R CRU ID N N
Fan assembly, Low Voltage 41V9748 v 1702-CTO, 23x, 24x, 25x, 26x, 34x, 35x, 36x, 37x, 38x, 39x, 3Ax, 3Cx, 3Dx, 3Ex, 3Fx, 3Gx, 3Hx, 3Jx, 3Kx, 3Lx, 3Mx, 3Nx, 3Qx, 3Rx, 3Sx, 44x, 45x, 46x, 47x, 49x, 4Ax, 4Bx, 4Ex, 4Fx, 4Gx, 4Hx, 4Kx, 4Lx, 53x, 55x, 57x, 58x, 5Cx, 5Dx, 5Ex, 5Fx, 5Gx, 5Kx, 5Jx, 5Mx, 5Nx, 5Px, 5Qx, 5Rx, 5Sx, 5Tx, 63x, 64x, 65x, 68x, 6Bx, 6Cx, 73x, 74x, 75x, 76x, 77x, 78x, 7Ax, 79x, 7Bx, 94x, 98x, C3x, C4x, C5x, C6x, C7x v 1703-CTO, 37x, 3Jx, 3Qx v 1704-CTO, 33x, 34x, 3Dx, 3Qx, 3Tx, 43x, 44x, 4Cx, 4Dx, 4Jx, 56x, 5Bx, 5Lx, 63x, 66x, 69x, 6Ax v 1705-CTO, 24x, 33x, 34x, 3Gx, 3Px, 3Qx, 3Ux, 43x, 44x, 48x, 4Cx, 53x, 54x, 59x, 5Ax, 5Dx, 5Ex, 5Hx v 2507-CTO, 3Bx v 2508-CTO, 3Bx v 2533-CTO, A3x, A4x, A5x v 1702-CTO, 34x, 44x, 79x, 3Jx, 3Lx, 3Qx, 49x, 4Ex, 37x, 5Nx, 4Fx, 3Hx, 3Sx, 68x, 6Cx, 5Fx, 3Dx, 3Ex, 3Cx, 74x, 94x, 76x, 55x, 4Gx, 58x, 5Px, 4Kx, 4Ax, 3Gx, 3Mx, 3Nx, 5Ex, 5Cx, 3Ax, 5Kx, 5Jx, 98x, 36x, 3Fx, 5Mx, 38x, 35x, 46x, 47x, 4Bx, 5Gx, 63x, 6Bx, 45x, 64x, 65x, 4Hx, 3Rx, 3Kx, 75x, 77x, 78x, 5Qx, 5Rx, 39x, 5Dx, 53x, 57x, 73x, 7Ax, 5Sx, 5Tx, 7Bx, 4Lx, C3x, 24x, C4x, C5x, C6x, C7x, 23x, 25x, 26x, 88x v 1703-CTO, D6x, 3Wx, D8x, E7x v 1704-CTO, D3x, 3Yx, EAx, ECx, EFx, EGx, E9x, F4x, F5x, EBx, G3x, G4x, KAx v 1705-CTO, D3x, DBx, EJx, 89x, B6x, B7x, 3Xx, D7x, D9x, Dax, HBx, 7Dx, 7Fx, 7Ex, 7Gx, H3x, 7Nx v 2507-CTO, D4x v 2508-CTO, D4x Fan assembly, Standard Voltage v 1706-all v 1707-all v 1708-all v 1709-all v 2509-all v 2510-all 41V9749
No. 25 FRU Fan assembly, Intel Core 2 Duo processor Standard voltage v 1706-all v 1707-all v 1708-all v 1709-all v 2509-all v 2510-all Fan assembly, Low Voltage v 7666-All v 7667-All v 7668-All v 7669-All v 7670-All v 7671-All Fan assembly, Standard Voltage v 7673-All v 7674-All v 7675-All v 7676-All v 7678-All v 7679-All 28 Backup battery (3V with wire) TrackPoint cap set ThinkPad X6 UltraBase FRU no. 42W2522 RoHS ID R CRU ID N

42X3804

42X3805

92P1210 91P9642 40Y8120

R R R R

** * * *

ThinkPad X6 UltraBase 42X4320 v 7666-34x, 63x, 26x, 3Ax, 36x, 86x, 47x, 7Mx, 74x, 75x, 7Px, 77x, 78x, 24x, 7Gx, 38x, 8Ex, 84x, 73x, 76x, 64x, 83x, 53x, 54x, 43x, 55x, 8Ax, 8Bx, 8Cx, 8Dx, 3Cx, 3Dx, 3Fx, 3Ex, 93x, 94x v 7667-3Fx, 3Ex v 7668-28x, 93x, 94x v 7669-49x, 29x, 4Ax v 7670-CTO v 7673-CTO, 65x, 74x, 4Jx, 4Hx, 53x, 54x, 23x, 33x, 34x, 3Hx, 78x, 3Jx, 79x, 39x, 3Ax, 3Nx, 7Ax, 7Gx, 3Dx, 3Lx, 7Bx, 24x, 4Dx, 47x, 4Lx, 75x, 3Fx, 3Gx, 45x, 46x, 7Cx, 7Dx, 4Gx, 25x, 44x, 76x, 3Hx, 7Ex, 73x, 3Kx, 7Hx, 7Jx, 4Mx, 66x, 4Nx, 5Ax, 5Bx v 7674-CTO, 65x, 74x, 66x, 4Nx v 7675-CTO, 33x, 34x, 35x, 49x, 38x, 4Ax, 39x, 3Ax, 3Bx, 4Bx, 3Ex, 4Cx, 27x, 28x, 3Jx, 48x, 4Ex, 75x, 29x, 7Fx, 55x, 3Mx, 4Kx, 7Kx, 59x, 5Ax, 5Bx v 7676-CTO, 35x, 56x, 4Fx, 3HX, 57x, 58x, 3Lx, 4Px, 3Px, 5Cx

5 7b 6

No. 1 FRU FRU no. RoHS ID R CRU ID N
LCD front bezel assembly 12.1-inch TFT (SPWG) 41V9721 v 1702-CTO, 34x, 44x, 3Jx, 3Lx, 3Qx, 49x, 24x, 4Ex, 37x, 5Nx, 4Fx, 3Hx, 3Sx, 68x, 6Cx, 5Fx, 3Dx, 3Ex, 3Cx, 55x, 4Gx, 58x, 5Px, 4Kx, 4Ax, 3Gx, 3Mx, 3Nx, 5Ex, 5Cx, 3Ax, 5Kx, 5Jx, 83x, 84x, 85x, 36x, 3Fx, 5Mx, 86x, 38x, 35x, 46x, 47x, 4Bx, 5Gx, 63x, 6Bx, 45x, 64x, 65x, 4Hx, 3Rx, 3Kx, 5Qx, 5Rx, 87x, 39x, 5Dx, 53x, 57x, 23x, 25x, 5Sx, 5Tx, 4Lx, 26x v 1703-CTO, 37x, 3Jx, 3Qx v 1704-CTO, 33x, 43x, 34x, 44x, 3Qx, 5Bx, 3Tx, 4Dx, 63x, 69x, 66x, 4Jx, 3Dx, 4Cx, 56x, 5Lx, 6Ax v 1705-CTO, 33x, 43x, 34x, 44x, 3Qx, 24x, 59x, 48x, 54x, 4Cx, 5Ax, 5Hx, 3Ux, 3Gx, 85x, 3Px, 5Ex, 5Dx, 53x v 2507-CTO, 3Bx v 2508-CTO, 3Bx v 2533-CTO v 1706-All v 1707-All v 1708-All v 1709-All v 2509-All v 2510-All v 1702-CTO, D5x, D6x, 3Wx, D8x, E7x, E8x, F3x, E3x, E4x, F6x, E5x, EEx, 88x, N3x,, L6x, L8x, M7x, ELx, K4x, DCx, K5x, ENx, F9x, K6x, EPx, KBx, R3x, R4x, M3x, MNx, N9x, LCx v 1703-All v 1704-CTO, D3x, EAx, ECx, EFx, EGx, E9x, F4x, F5x, G3x, EKx, F8x, K8x, G5x, KAx, R8x, S5x v 1705-CTO, D3x, DBx, EJx, 89x, 3Xx, D7x, D9x, DAx, 88x, LBx, K7x, EKx, K9x, MKx v 2507-All v 2508-All LCD front bezel assembly 12.1-inch TFT (TMD) v 1702-CTO, C3x, 79x, 93x, 74x, 94x, 76x, 95x, 96x, 98x, 99x, C4x, C5x, C6x, C7x, 97x, 75x, 77x, 78x, 73x, 7Ax, 7Bx v 1703-CTO v 1704-CTO v 1705-CTO v 2507-CTO v 2508-CTO v 2533-CTO, A3x, B3x, B4x, B5x, A5x, A4x v 1702-CTO, HFx, HCx, 7Cx, H7x, H4x, H8x, H9x, H5x, H6x, HAx, HDx, HEx, 7Dx, 7Fx, 7Hx, 7Ex, 7Gx, 7Jx, J6x, HGx, HHx, 7Kx, 7Lx,, QHx v 1703-CTO v 1704-CTO, 7Mx, J8x v 1705-CTO v 2507-CTO v 2508-CTO 41V9722
LCD front bezel assembly 12.1-inch TFT (SPWG) 42X3937 v 7666-CTO, 24x, 26x, 34x, 36x, 38x, 39x, 3Ax, 3Cx, 3Dx, 3Ex, 3Fx, 53x, 54x, 55x, 59x, B4x, B5x, B6x v 7667-CTO, 34x, 36x, 3Ex, 3Fx v 7668-CTO, 24x, 38x, 25x, B3x, 57x, 58x v 7669-CTO, 35x, 37x, 56x, 46x, 27x, 29x, 3Gx, 3Hx v 7673-CTO, 23x, 24x, 25x, 33x, 34x, 39x, 3Ax, 3Dx, 3Fx, 3Gx, 3Hx, 3Jx, 3Kx, 3Lx, 3Nx, 3Qx, 44x, 45x, 46x, 47x, 4Dx, 4Gx, 4Hx, 4Jx, 4Lx, 4Mx, 4Nx, 4TU, 54x, 65x, 66x, 73x, 74x, 75x, 76x, 78x, 79x, 7Ax, 7Bx, 7Cx, 7Dx, 7Ex, 7Gx, 7Hx, 7Jx, 82x, 83x, 84x, 85x, 86x, 87x, 88x, 89x, 8Ax, 8Bx, 8Cx, 8Dx, 8Ex, 8Gx, 8Hx, 8Kx, 97x, 98x, 99x, 9Ax, 9Bx, 9Cx, 9Dx, 9Ex, 9Fx, 9Gx v 7674-CTO, 65x, 74x, 66x, 4Nx v 7675-CTO, 26x, 27x, 28x, 29x, 33x, 34x, 35x, 38x, 39x, 3Ax, 3Bx, 3Ex, 3Jx, 3Mx, 48x, 49x, 4Ax, 4Bx, 4Cx, 4Kx, 75x, 7Fx, 7Kx, 8Lx, 8Mx, 8Nx, 8Px, 8Rx, 8Sx, 92x, 93x, 94x, 95x, 96x v 7676-CTO, 35x, 4Fx, 3HX, 58x, 3Lx, 4Px, 3Px, 88x, 89x v 7673-CTO, H3x, H4x, H5x, H6x, H7x, H8x, H9x, HAx, HBx, HCx, HFx, HGx, HHx, HJx, J2x, J3x, J5x, J6x, J7x, J8x, J9x, JAx, JBx, JDx, JEx, JFx, JGx v 7674-CTO v 7675-CTO, H4x, H6x, H7x, H8x, H9x, HAx, HBx, HCx, J2x, J3x, J4x, J5x, J6x, J7x, J8x, J9x v 7676-CTO, H5x, H6x, J3x, J4x LCD front bezel assembly 12.1-inch TFT (TMD) v 7666-CTO, 63x, 64x, 73x, 74x, 75x, 76x, 77x, 78x, 7Gx, 7Mx, 7Px, 83x, 84x, 86x, 8Ax, 8Bx, 8Cx, 8Dx, 8Ex, 8Jx, 8Kx, 93x, 94x, A4x, A5x, A6x, A7x, A8x, A9x, AAx v 7667-CTO v 7668-CTO, 65x, 79x, 7Ax, 7Bx, 7Cx, 7Gx, 87x, 8Fx, 8Gx, 8Hx, 93x, 94x, A3x v 7669-CTO, 7Fx, 7Dx, 88x, 85x LCD front bezel assembly 12.1-inch TFT (SPWG) for WWAN v 7666-CTO, 43x, 47x, E3x, E4x v 7667-CTO v 7668-CTO, 44x v 7669-CTO, 45x, 49x, 4Ax, 4Bx v 7673-CTO, 53x, 5Ax, 5Bx, 5Dx, A3x, A4x v 7674-CTO, 53x, 5Ax, 5Bx v 7675-CTO, 55x, 59x, 5Ax, 5Bx v 7676-CTO, 56x, 57x, 5Cx, 5Ex v 7673-CTO, K1x, K2x, K3x, K4x v 7674-CTO, J2x v 7675-CTO, K2x v 7676-CTO, K1x, K2x, K3x 42X3938

 

Tags

Battery Kitue9JKE 20LB330 RF26nbsh WM2010CW IA5863 RX-E600 Forerunner 210 WD-N12155D Machine Roland E-38 VCA261NT AV-32X37 DVP-NC615 KLV-22BX300 HDT1338A 2400-103 Psm44 Asus N80 LMU180HE EAX600 Diego Cm45 1000 RTS 124-1 Vtech Mce-KIT Sharp XL35 LE37C630 SCP-2400 Pro-V RR-QR170 CCD-TR511E DSC-P200 B DV9500 807SI HQ6830 NAD T163 Roland E-66 Nokia 6030 DRX 950 Daikin RKS RP5011 CPC6128 MS100 Samsung ES65 EMS1720 SC-AK330 VC-S2000GM Aspire 2920 Specifications Command Nikkormat FT Abit KD7A CQ-RDP113N LBP 3300 DLE3777W Edition 3 P4GPL-x- Fishing HD4917 3 5 FME 20EX Thermomix 3300 EU 340 VL-SD20S PG-A20X XBM 538 Citroen Saxo CDX-6500 XE-A20S 41049 DC-J221 PDW-530 Office EP1052 SD257WXE RT-20LA70 DSB-B350W DP42746 D-NE20LS 9040MFP Waht-SA1 EZ-AG D-535 Zoom MZ-N420D N GO Cube 2010 CPJ-200 Multi-piattaforma 2 Servers ADP1433F Singer 1110 77 Kbse DVP-75 DSC-H7-B Fujifilm A170 CFD-S100 EW862F IC-E80D CDX-GT710 300-4 Fvxs25FV1B

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101