Reviews & Opinions
Independent and trusted. Read before buy Olivetti D-copia 18MF!

Olivetti D-copia 18MF

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Olivetti D-copia 18MF Printer, size: 4.5 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Olivetti D-copia 18MFAbout Olivetti D-copia 18MF
Here you can find all about Olivetti D-copia 18MF like drivers and other informations. For example: toner.

Olivetti D-copia 18MF manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Olivetti D-copia 18MF please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Olivetti D-copia 18MF photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 9. Page 1 of 1. Average Rating:
Galik 3:53pm on Friday, October 1st, 2010 
Did it too tightly. The Canon speedlight eliminates that. The flash worked right out of the box and my digital Christmas pictures turned out great.
mikkokh 12:05am on Tuesday, September 21st, 2010 
I LOVE you guys! Thank you sooooooo much! This was the BEST service I got from all my purchases from Amazon! Thank you upgrading my shipping.
Ahia 4:37am on Thursday, September 2nd, 2010 
Did it too tightly. The Canon speedlight eliminates that. The flash worked right out of the box and my digital Christmas pictures turned out great.
ezqimo 2:00am on Saturday, August 14th, 2010 
Canon Speedlite 580EX II Hot-shoe clip-on flash his is the premier Speedlite for all photographers, including professionals. This product very useful & helpful & efficent product , u will feel & enjoy with ur photograph. So u go with this product General Width 3 in Depth 4.
NowhereMan 7:35pm on Tuesday, August 10th, 2010 
Wow - just when you thought the 580EX was about as good as it gets - add Environmental Sealing - faster refresh yet quieter - great distance and for a... I thought it was a good flash but i thought it was a little pricey, the flash cost just as much as the camera. "Easy To Clean". I use this for everyday as well as freelance weddings and I find it much better then the previous. Great recycle time. "Lightweight","Quiet".
J.K.V 8:59pm on Saturday, July 24th, 2010 
"Very nice flash and works well with the Canon cameras. Much cheaper elsewhere." Full of features, excellent recycle time, well integrated. "I own the 580EX and ordered the 580 EX II because of its electronic compatibility with the new EOS 1D Mark III (which I have on preorder).
V 12:51pm on Friday, May 28th, 2010 
During my first shoot with the flash I had forgotten to lock it in place. The flash slipped off and bounced off the asphault.
sangeeta 12:42am on Wednesday, May 5th, 2010 
Love the features This flash has everything and does an amazing job! I have been using SLR cameras with a hotshoe flash for years. Sony and Nikon have or will have competitive camera out on the market but I have an invenstment with Canon lenes ans flash units so I am satisfied wit...
Jack444 3:24pm on Thursday, March 11th, 2010 
happy customer i received my package early which was wonderful cause later that evening i was able to us my flash for this gorgeous picture i toke i ... Very Addictive Speedlite Bought one of these about 3 years ago when my wife and I had just upgraded from point and click into DSLR photography.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

d-Copia 18MF

Operation Guide

PUBLICATION ISSUED BY: Olivetti S.p.A. Gruppo Telecom Italia Via Jervis, 77 - 10015 Ivrea (ITALY) www.olivetti.com Copyright 2005, Olivetti All rights reserved

May 2005

The mark affixed to the product certifies that the product satisfies the basic quality requirements.
The manufacturer reserves the right to carry out modifications to the product described in this manual at any time and without any notice.
ENERGY STAR is a U.S. registered mark.
The ENERGY STAR program is an energy reduction plan introduced by theUnited States Environmental Protection Agency in response to environmental issues and for the purpose of advancing the development and utilization of more energy efficient office equipment.
Your attention is drawn to the following actions which could compromise the conformity attested to above, as well as the characteristics of the product: incorrect electrical power supply; incorrect installation, incorrect or improper use or use not in compliance with the warnings provided in the Users Manual supplied with the product; replacement of original components or accessories with others of a type not approved by the manufacturer, or performed by unauthorised personnel.
All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage and retrieval system, without permission in writing from the Publisher.
Making Full Use of This Machines Advanced Functions
Enlarging/reducing copies to 2 a desired size between 50 % and 200 % Zoom mode (Refer to page 4-4)
Copying at a previously registered zoom ratio Standard Zoom mode (Refer to page 4-4)
Making clear reproductions of photographs Image quality selection (Refer to page 4-1)
Saving on toner use 5 EcoPrint mode (Refer to the Advanced Operation Guide.)
Making one copy from either 6 two or four originals Combine modes (Refer to the Advanced Operation Guide.)
Collating automatically Collate mode (Refer to page 4-6)
Interrupting the current job using Print Override mode (Refer to page 4-7)
Sending scanned data by e- 9 mail (Refer to page 4-9)
Making full-color scans (Refer to page 4-13)

10 Loading an image from

TWAIN (Refer to page 4-13)
11 Storing address information
Address Book (Refer to the Advanced Operation Guide)
12 Managing the number of
scans and prints by Job Account (Refer to the Advanced Operation Guide)

OPERATION GUIDE

13 Changing the operational
environment by each individual user User Login (Refer to the Advanced Operation Guide)
14 A full range of optional

equipment is available

Document Processor (Refer to the Advanced Operation Guide)
Paper Feeder (Refer to the Advanced Operation Guide)
Expansion Memory (Refer to the Advanced Operation Guide)
FAX System (Refer to the Advanced Operation Guide)

Contents

Legal and Safety 1 Machine Parts
Main Body. 1-1 Operation Panel. 1-4 Message Display. 1-5

Loading Paper

Loading Paper Into a Cassette. 2-1 Adjusting the Paper Stopper for Folio or Oficio II Size Page. 2-3 Loading Paper on the MP Tray. 2-3 Using the Face-up Tray. 2-5

Preparations

Connecting the Cables. 3-1 Connecting the Network Cable. 3-1 Connecting the Parallel or USB Cable. 3-1 Connecting the Power Cord. 3-2 Turning the Machine On. 3-2 Accessing Menu Items. 3-3 Network Settings. 3-4 Registering the IP Address. 3-4 Registering the Subnet Mask. 3-4 Registering the Default Gateway. 3-5 Date and Time Settings. 3-5 Setting the Time Zone. 3-5 Summer Time Setting. 3-6 Setting the Current Date and Time. 3-6 Default Operation Mode. 3-7 Character Entry. 3-8 Keys Used for Entering Characters. 3-8 Available Characters. 3-9 List of Character Assignments. 3-9 Entering Characters. 3-10 Selecting Message Language. 3-11 Other Settings. 3-11

Basic Operation

Basic Copying Procedure. 4-1 Canceling Copy. 4-3 Zoom Copies. 4-4 Standard Zoom. 4-4 Variable Zoom. 4-5 Collate Mode. 4-6 Print Override Mode. 4-7 Low Power Mode. 4-8 Auto Sleep. 4-8 Basic Scanning Procedure. 4-9 Scan to E-mail. 4-9

Scan to Folder. 4-11 Recipient Selection from One-Touch Keys. 4-13 Scan with TWAIN Driver. 4-13 Selecting Color Scan Mode. 4-13 Basic Printing Procedure. 4-14 Installing the Printer Driver. 4-14 Printing from Application Software. 4-14

Maintenance

Cleaning the Machine. 5-1 Toner Container Replacement. 5-1 Online Help Messages. 5-1 Replacing Toner Container. 5-2 Cleaning the Charger and the Registration Roller. 5-4 Reinstalling the Transport Pin. 5-5

Troubleshooting

General Guidelines. 6-1 Maintenance and Error Messages. 6-3 Paper Jam. 6-7 Jam Location Indicators. 6-7 Online Help Messages. 6-7 MP Tray and Inside Machine. 6-7 Cassette. 6-9 Face-up Tray. 6-9 Optional Document Processor. 6-10

Specifications

Main Body. 7-1 Copying Functions. 7-2 Printing Functions. 7-3 Scanning Functions. 7-3 Document Processor (Option). 7-4 Paper Feeder (Option). 7-4 Environmental Specifications. 7-4

Legal and Safety

CAUTION: No liability is assumed for any damage caused by improper installation.

Notice

The information in this guide is subject to change without notification. Additional pages may be inserted in future editions. The user is asked to excuse any technical inaccuracies or typographical errors in the present edition. No responsibility is assumed if accidents occur while the user is following the instructions in this manual. No responsibility is assumed for defects in the printers firmware (contents of its read-only memory). This guide, any copyrightable subject matter sold or provided with or in connection with the sale of the machine, are protected by copyright. All rights are reserved the prior written consent of the owner of the copyright is prohibited. Any copies made of all or part of this manual, any copyrightable subject must contain the same copyright notice as the material from which the copying is done.

Regarding Tradenames

Diablo 630 is a product of Xerox Corporation. IBM Proprinter X24E is a product of International Business Machines Corporation. Epson LQ-850 is a product of Seiko Epson Corporation. Hewlett-Packard, PCL, and PJL are registered trademarks of Hewlett-Packard Company. Centronics is a trade name of Centronics Data Computer Corp. PostScript is a registered trademark of Adobe Systems Incorporated. Macintosh is a registered trademark of Apple computer, Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. PowerPC is a trademark of International Business Machines Corporation. ENERGY STAR is a U.S. registered mark. All other brand and product names are registered trademarks or trademarks of their respective companies. The product uses PeerlessPrintXL to provide the HP LaserJet compatible PCL6 language emulation. PeerlessPrintXL is a trademark of the Peerless Systems Corporation, 2381 Rosecrans Ave. El Segundo, CA 90245, U.S.A. This product contains UFST and MicroType from Agfa Monotype Corporation.

This product contains GPL (www.fsf.org/copyleft/gpl.html) software as part of its firmware. For further information including availability of the source code, to address to the retailer from which the product it has been acquired.
Legal Restriction On Copying
It may be prohibited to copy copyrighted material without permission of the copyright owner. It is prohibited under any circumstances to copy domestic or foreign currencies. Copying other items may be prohibited.
Agfa Japan License Agreement
Software shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as well as the UFST Software. You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and versions of letters, numerals, characters and symbols (Typefaces) solely for your own customary business or personal purposes at the address stated on the registration card you return to Agfa Japan. Under the terms of this License Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the fonts on more than three printers, you need to acquire a multi-user license agreement which can be obtained from Agfa Japan. Agfa Japan retains all rights, title and interest to the Software and Typefaces and no rights are granted to you other than a License to use the Software on the terms expressly set forth in this Agreement. To protect proprietary rights of Agfa Japan, you agree to maintain the Software and other proprietary information concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access to and use of the Software and Typefaces. You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You agree that any such copy shall contain the same proprietary notices as those appearing on the original. This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This License may be terminated by Agfa Japan if you fail to comply with the terms of this License and such failure is not remedied within thirty (30) days after notice from Agfa Japan. When this License expires or is terminated, you shall either return to Agfa Japan or destroy all copies of the Software and Typefaces and documentation as requested. You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software. Agfa Japan warrants that for ninety (90) days after delivery, the Software will perform in accordance with Agfa Japan-published specifications, and the diskette will be free from defects in material and workmanship. Agfa Japan does not warrant that the Software is free from all bugs, errors and omissions. The parties agree that all other warranties, expressed or implied, including warranties of fitness for a particular purpose and merchantability, are excluded.

Auto Sleep

The device automatically enters Sleep Mode when 30 minutes have passed since the device was last used. The amount of time of no activity that must pass before Sleep Mode is activated may be lengthened. For further information refer to Auto Sleep on page 4-8.

Paper Recycling

The Energy Star Program encourages the use of environmentally friendly recycled paper. Your sales or service representative can provide information about recommended paper types.
Please read this Operation Guide before using the machine. Keep it close to the machine for easy reference.
The sections of this guide and parts of the machine marked with symbols are safety warnings meant to protect the user, other individuals and surrounding objects, and ensure correct and safe usage of the machine. The symbols and their meanings are indicated below. DANGER: Indicates that serious injury or even death will very possibly result from insufficient attention to or incorrect compliance with the related points. WARNING: Indicates that serious injury or even death may result from insufficient attention to or incorrect compliance with the related points.
CAUTION: Indicates that personal injury or mechanical damage may result from insufficient attention to or incorrect compliance with the related points.

Symbols

The following symbols indicate that the related section includes safety warnings. Specific points of attention are indicated inside the symbol.

[General warning]

[Warning of danger of electrical shock]
[Warning of high temperature]
The following symbols indicate that the related section includes information on prohibited actions. Specifics of the prohibited action are indicated inside the symbol.
[Warning of prohibited action]

[Disassembly prohibited]

The following symbols indicate that the related section includes information on actions which must be performed. Specifics of the required action are indicated inside the symbol.

For safety purposes, always remove the power plug from the outlet when performing cleaning operations. If dust accumulates within the machine, there is a danger of fire or other trouble. It is therefore recommended that you consult with your service representative in regard to cleaning of internal parts. This is particularly effective if accomplished prior to seasons of high humidity. Consult with your service representative in regard to the cost of cleaning the internal parts of the machine.
Do not place heavy objects on the machine or cause other damage to the machine. Do not open the upper front cover, turn off the power switch, or pull out the power plug during copying. When lifting or moving the machine, contact your service representative. Do not touch electrical parts, such as connectors or printed circuit boards. They could be damaged by static electricity. Do not attempt to perform any operations not explained in this handbook.
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Do not look directly at the light from the scanning lamp as it may cause your eyes to feel tired or painful.
Cautions when Handling Consumables
Do not attempt to incinerate the Toner Container. Dangerous sparks may cause burns. Keep the Toner Container out of the reach of children.
If toner happens to spill from the Toner Container, avoid inhalation and ingestion, as well as contact with your eyes and skin. If you do happen to inhale toner, move to a place with fresh air and gargle thoroughly with a large amount of water. If coughing develops, contact a physician. If you do happen to ingest toner, rinse your mouth out with water and drink 1 or 2 cups of water to dilute the contents of your stomach. If necessary, contact a physician. If you do happen to get toner in your eyes, flush them thoroughly with water. If there is any remaining tenderness, contact a physician. If toner does happen to get on your skin, wash with soap and water.
Do not attempt to force open or destroy the Toner Container.
After use, always dispose of the Toner Container in accordance with Federal, State and Local rules and regulations. Store all consumables in a cool, dark location. If the machine will not be used for an extended period of time, remove the paper from the cassette, return it to its original package and reseal it.

Laser Safety (Europe)

Laser radiation could be hazardous to the human body. For this reason, laser radiation emitted inside this machine is hermetically sealed within the protective housing and external cover. In the normal operation of the product by user, no radiation can leak from the machine. This machine is classified as Class 1 laser product under IEC 60825.

Network tool for Clients Operation Guide Network tool for Clients is a network printing utility intended to monitor and configure the printing system. This guide describes how to install and operate Network tool for Clients. This guide is stored on the CD-ROM as a PDF document. Network tool for Direct Printing Operation Guide Network tool for Direct Printing is a utility that allows you to directly print PDF files without starting Adobe Acrobat by directly sending a PDF file through the Windows spooler. This guide describes how to install and operate Network tool for Direct Printing. This guide is stored on the CD-ROM as a PDF document. Network FAX Driver Operation Guide Describes how to use the Network FAX Driver to send documents created on a network computer directly from that computer to the other fax machine. This guide is stored on the CD-ROM as a PDF document.

Conventions

This manual uses the following conventions. Convention Italic Typeface Description Example
A Completed message displays and the Used to denote messages or names displayed on the operation Copy Basic screen returns. panel, names of machine parts and for references to additional information and other publications. Used for emphasis and to denote buttons on the operation panel. To cancel copying, press Stop/Clear.

Bold Typeface Notes

Used to provide additional or useful information about a function NOTE: For information about storing the pin, refer to step 10. or feature. Can also contain references to other publications. Used to provide important information. IMPORTANT: Ensure paper is not folded, curled, or damaged.

Important

Caution
Cautions are statements that suggest mechanical damage as a CAUTION: Do not pull the cassette out when holding the front of the machine. result of an action. Used to alert users to the possibility of personal injury.

Warning

WARNING: High voltage is present in

the charger section.

1 Machine Parts

Main Body

Original Cover Platen Original Size Indicator Plate Operation Panel Top Cover Front Cover Process Unit Charger Cleaner Lock Lever
10 Toner Container 11 Toner Container Release Lever

Machine Parts

12 Output Tray 13 Stopper Extension Lock 14 Paper Stopper 15 Paper Width Guides 16 Cassette 17 Paper Width Guides (MP Tray) 18 MP (Multi-Purpose) Tray 19 MP Tray Extension
20 Document Processor Connector 21 Parallel Interface Connector 22 USB Interface Connector 23 Right Cover Anchor Pin 24 Network Interface Connector 25 Rear Cover (Face-up Tray) 26 Power Switch 27 Power Cord Receptacle

Operation Panel

Open the face-up tray (located at the rear of the machine).
Perform the standard copying or printing procedure. Completed pages will be output onto the face-up tray.

3 Preparations

Connecting the Cables
The machine can be connected to a network or directly to a computer.
Connecting the Network Cable
When connecting the machine to the network, use the appropriate network cable (10BASE-T or 100BASE-TX).
Turn the machine off, and remove the power cord from the outlet.
Connect the network cable to the network interface connector at the rear side of the machine.
Connect the other end of the network cable to your network device. Make network settings on the operation panel - refer to Network Settings on page 34.
Connecting the Parallel or USB Cable
To connect the machine directly to your computer, use either a parallel cable or USB cable. For details refer to the Advanced Operation Guide.
Turn the machine off, remove the power cord from the outlet and turn the computer off.
Connect the printer cable to the appropriate connector located at the rear side of the machine.

Parallel Cable

USB Cable
Connect the other end of the printer cable to the appropriate connector on your computer.
Connecting the Power Cord
Connect the power cord to the rear of the machine. Connect the other end to a suitable power outlet.

Turning the Machine On

Turn the power switch on. The machine will begin to warm up after which the basic screen is displayed.

Accessing Menu Items

When you configure the machine, you do so by accessing a menu item and making your setting from there. Each configuration instruction in this guide tells you to access the menu item and provides a route map to direct you to that item. An example of a route map and its significance is shown below.

System Menu/ Counter

This represents the control panel button to be pressed. Press the up or down button until System Setting is displayed.

The copy exposure can be adjusted either automatically or manually. This machine is initially set for manual exposure adjustment. Normally there will be no need for you to adjust the copy exposure.
Enter the number of copies required. Up to 999 can be entered.
Open the original cover and place the original face-down onto the platen against the left rear corner of the platen. Close the original cover.
Press Start. Copying begins immediately. To cancel copying, press Stop/Clear. Refer to Canceling Copy on page 4-3.
Completed copies are delivered to the output tray.

Canceling Copy

Press Stop/Clear. The Pausing Job List screen will be displayed.
to select the copying job to cancel.
Press left Select. Cancel Job. Are you sure? is displayed. Press left Select. Canceling is displayed and the copying is canceled. The Pausing Job List screen is displayed. If you want to cancel another job, repeat steps 2 through 5. Press right Select. The Status Menu screen is displayed and processing of jobs is resumed. To enable copying again, press Copy. The message display returns to the basic screen.

Zoom Copies

It is possible to change the zoom ratio in order to make copies of an enlarged or reduced size. The following modes are available for selecting the desired zoom ratio. Mode Standard Zoom Description Copies can be made at one of the fixed zoom ratios. The following ratios are registered in the machine: 200 %, 141 % (A5 A4), 129 % (Statement Letter), 115 % (B5 A4), 100 % (default setting), 90 % (Folio A4), 86 % (A4 B5), 78 % (Legal Letter), 70 % (A4 A5), 64 % (Letter Statement), and 50 %. The zoom ratio can be set to any 1 % increment between 50 % and 200 %, as desired and shown below.

Variable Zoom

Standard Zoom

Press Copy.

Press left Select. Press or to select Standard Zoom.
Press Enter. Press or to select the desired zoom ratio.
Press Enter. The message display shows Completed and returns to the basic screen. The new zoom ratio is registered. To start copying, place the original on the platen and press Start.
Perform the following procedure to make settings for the Variable Zoom mode.
Press left Select. Press or to select Zoom Entry.
Press Enter. Press ratio. or , as appropriate, to change the displayed zoom ratio to the desired

Collate Mode

Multiple originals can be collated. To use the collate mode turn the continuous scan function on. For details, refer to the Advanced Operation Guide.

Originals

Copies

Press Function.

to select Collate.
Press Enter. Press or to select On.
Press Enter. The message display shows Completed and returns to the Function screen. Press right Select. Enter the desired number of copies. Place the original on the platen and press Start. Scanning of the first original will start. Replace the first original with the next one and press Start. Scanning will start.

Scan to E-mail

The following procedure explains the method for attaching scan data to e-mail for transmission. Scan to e-mail works within the following environments: It must have a network environment in which this machine can connect to a mail server. It is recommended that the machine be used in an environment in which it can connect to the mail server at any time over a LAN. The SMTP settings must be completed. Use Embedded Web Server, to register the IP address and the host name of the SMTP server. Refer to the Advanced Operation Guide. There may be a times where transmission is not possible due to the size of each e-mail item.
Recipient Entry from the Operation Panel An e-mail address is entered directly from the operation panel, and the procedure to transmit is explained. Refer to Recipient Selection from Address Book on page 4-10 for the procedure for using the Address Book and to the Advanced Operation Guide for information on registering an address in the address book.

Press Send.

to select E-mail and press Enter.
Enter the destination e-mail address. Refer to Character Entry on page 3-8 for information on entering characters. Once you have completed entering the address, press Enter. To enter a subject and/or message, press right Select. If you do not need subject and message, go directly to step 10 without pressing right Select. Enter the subject for the e-mail when the subject input screen is displayed (60 characters maximum).
Press Enter. Enter the desired message for the e-mail when the message input screen is displayed (60 characters maximum). Press Enter. The Completed screen is displayed, and the message display returns to the basic screen. Place the original on the platen and press Start. The scanned image is sent to the destination e-mail address as an attachment. The image (PDF) is named as doc plus the date and time at which it was transmitted. For example, a PDF attachment named doc04252005101530.pdf is a file sent on 2005 April 25th at 10:15:30.
Recipient Selection from Address Book
to select Address Book or Ext Address Book.
Press Enter. Press or to select a desired name.
Press Enter. Press or to select E-mail.
Press Enter. Completed will appear and the message display returns to the basic screen. Place the original on the platen and press Start. The scanned image is sent to the destination e-mail address as an attachment. The image (PDF) is named as doc plus the date and time at which it was transmitted. For example, a pdf attachment named doc04252005101530.pdf is a file sent on 2005 April 25th at 10:15:30.

Scan to Folder

The following procedure explains the method for scanning data to a folder on a PC or FTP server. The scanned data can only be sent to one folder at a time. Refer to Recipient Selection from Address Book on page 4-10 for the procedure for using the Address Book and to the Advanced Operation Guide for information on registering an address in the address book. Entering a Recipient Address from the Operation Panel

to select Folder. or or to select SMB. to select FTP.
For transmission to a shared PC folder, press the For transmission to a shared FTP folder, press the Press Enter.
Enter the host name or the IP address of the host and press Enter. Enter the path name where the file is to be stored and press Enter.
Enter the login user name and press Enter. If you also have a domain name, enter it after the user name. Enter the login password and press Enter. Press Enter. Place the original on the platen and press Start. The scanned image is sent to the destination e-mail address as an attachment. The image (PDF) is named as doc plus the date and time at which it was transmitted. For example, a pdf attachment named doc04252005101530.pdf is a file sent on 2005 April 25th at 10:15:30.
to select a desired name.
Press Enter. Press or to select the folder.
Press Enter. Login User Name input screen is displayed. Enter the login user name and press Enter. If you also have a domain name, enter it after the user name. Enter the login password and press Enter.
Place the original on the platen and press Start. The scanned image is sent to the destination e-mail address as an attachment. The image (PDF) is named as doc plus the date and time at which it was transmitted. For example, a pdf attachment named doc04252005101530.pdf is a file sent on 2005 April 25th at 10:15:30.
Recipient Selection from One-Touch Keys
Frequently used recipients can be registered into the one-touch keys. If two or more one-touch keys are chosen a simultaneous transmission can take place. Refer to the Advanced Operation Guide for the registration procedure for the one-touch keys.
Press the one-touch key on which the destination is registered. Place the original on the platen and press Start. The scanned image is sent to the destination e-mail address as an attachment. The image (PDF) is named as doc plus the date and time at which it was transmitted. For example, a pdf attachment named doc04252005101530.pdf is a file sent on 2005 April 25th at 10:15:30.

Scan with TWAIN Driver

Be sure that you connect your PC with the machine using the USB cable and install the TWAIN Driver. The scan can be carried out from any TWAIN compatible application progr am. Refer to Advanced Operation Guide for the installation procedure and the usage of TWAIN Driver.
Selecting Color Scan Mode
The following color modes are available for scanning:
Mode Full Color Grayscale Monochrome Description The original will be scanned in full color. The scanning exposure will be set to Manual. The shading of the original will be reproduced. The scanning exposure will be set to Manual. The original will be scanned in monochrome. The resulting file size for the scan data will be smaller in comparison with the other color modes.
Refer to the Advanced Operation Guide.

Reference page 5-1

Scan memory overflow. Job is canceled.
page 4-3, Advanced Operation Guide

Send error. ####

page 4-11
Advanced Operation Guide page 4-9 Advanced Operation Guide
Advanced Operation Guide page 3-1

Message Send error. ####

Procedure 3101: SMTP Authentication error. Consult with your network administrator to verify that the Login Account Name and Login Password required for SMTP Authentication are correct. The SMTP server or FTP server is not operating properly. Check with your network administrator. An unregistered one-touch key was chosen. Select the correct one-touch key. Toner is running low. Replace the toner container using a new toner kit as soon as possible. Remove the process unit from the machine. Gently shake the process unit horizontally a few times. Reinstall it into the machine. The machine will stop printing soon, contact your service representative or authorized service center. The memory to execute the job is insufficient. The job will be automatically resumed, after the memory capacity to execute is available. If you want to cancel the job, press left Select. When job accounting is enabled, the account ID was already registered. Enter the correct account ID. When user login is enabled, an incorrect job accounting password was entered. Enter the correct password. When the user management setup (User Login) is enabled an incorrect user ID was entered. Enter the correct user ID.
Reference Advanced Operation Guide
This key is not registered. Toner low. Waste toner near full.

page 5-1

Waiting to scan.

Wrong account ID.

Advanced Operation Guide Advanced Operation Guide Advanced Operation Guide

Wrong password.

Wrong user ID.

Paper Jam

If a paper jam occurs, a message will be displayed about the jam and copying or printing will stop. Leave the power switch on and to remove the jammed paper refer to MP Tray and Inside Machine on page 6-7.

Jam Location Indicators

Indicator
Meaning Original jam in the optional document processor. Paper jam inside the machine Paper jam in the MP tray. Paper jam in the upper cassette. Paper jam in the optional paper feeder.
Reference page 6-10 page 6-7 page 6-7 page 6-9 page 6-9
WARNING: High voltage is present in the charger section. Take sufficient care
when working in this area, as there is a danger of electrical shock.
CAUTION: The fixing unit is extremely hot. Take care when working in this area.
When Paper Jam is displayed, press left Select (Help) to display the procedure to clear the jam. Press to display the next step or press to display the previous step.

Specification

96 MB (64 MB fixed and 32 MB detachable) Up to 256 MB to replace 32 MB
Maximum 2,000 m (6,500 feet) 1,500 lux or less 120 V AC, 60 Hz, 7.8 A 220 to 240 V AC, 50/60 Hz, 4.0 A 19 9/5/3/16 inches 385 mm Approx. 32 lbs. Approx. 14.5 kg 70 dB(A) 19 9/3/16 inches mm

Copying Functions

Item Copying speed Platen (1:1) 8 1/inches (Letter)/A4: 18 copies/min. A5: 10 copies/min. 8 1/inches (Legal): 15 copies/min. 8 1/inches (Letter)/A4: 18 copies/min. Approx. 9.5 sec. (1:1, 8 1/inches (Letter)/A4) Specification
Document Processor (1:1) First copy Resolution Scanning and Printing Continuous copying Zoom ratios
dpi 1 to 999 sheets 50, 64, 70, 78, 86, 90, 100, 115, 129, 141, and 200 % Any 1 % increment between 50 and 200 %

Printing Functions

Item Printing speed Specification 8 1/inches (Letter)/A4: 18 copies/min. A5: 10 copies/min. 8 1/inches (Legal): 15 copies/min. 8 1/inches (Letter)/A4: Approx. 8 sec. 300, 600 dpi, and Fast 1200 Microsoft Windows 95/98/Me Microsoft Windows NT 4.x/2000/XP Apple Macintosh OS 9.x/OS X 10.x UNIX Parallel: 1 port (IEEE1284) USB: 1 port (Hi-speed USB) Ethernet: 1 port (10BASE-T/100BASE-TX) Line printer, IBM proprinter, DIABLO 630, EPSON LQ850, PCL6, and KPDL
First print Resolution Compatible operation system

Host Interface

Emulations

Scanning Functions

Item Scanning Speed Specification Monochrome: 18 scan/min. Full Color or Grayscale: 4.8 scan/min. 1:1 - 8 1/2 x 11 inches (Letter)/A4, 200 dpi 200 x 100, 200 x 400, 200, 300, 400, and 600 dpi Full Color: 8 bit/dot (each color) Grayscale: 8 bit/dot Monochrome: 1 bit/dot PDF, TIFF (Only monochrome mode), JPEG (Only full color and grayscale modes) 100 % and Auto Ethernet: 1 port (10BASE-T/100BASE-TX) USB (TWAIN): 1 port (Hi-speed USB)

Resolution Color mode

File format Zoom ratios Host Interface
The maximum resolution using full color or gray scale modes is 300 dpi. To scan in full color or gray scale with 400 dpi or 600 dpi resolution, expansion of the internal memory is required. Refer to the Advanced Operator Guide.
Document Processor (Option)
Item Original feed system Originals Original sizes Original paper weight Maximum number of originals Dimensions (W) (D) (H) Weight Automatic feeding Sheets of paper Maximum: 8 1/inches (Legal) and Folio Minimum: 5 1/1/2 inches (Statement) and A5R 50 to 120 g/m 50 (50 to 80 g/m) 17 15/1/11/16 inches 93 mm Approx. 5 lbs. Approx. 2.3 kg Specification

TO DISPOSE OF OUR DEVICES CORRECTLY:
a) Contact the Local Authorities, who will give you the practical information you need and the instructions for handling the waste correctly, for example: location and times of the waste collection centres, etc. b) When you purchase a new device of ours, give a used device similar to the one purchased to our dealer for disposal.
The crossed dustbin symbol on the device means that: - when it to be disposed of, the device is to be taken to the equipped waste collection centres and is to be handled separately from urban waste; - The producer guarantees the activation of the treatment, collection, recycling and disposal procedures in accordance with Directive 2002/96/CE (and subsequent amendments).
2. FOR OTHER COUNTRIES (NOT IN THE EU)
The treatment, collection, recycling and disposal of electric and electronic devices will be carried out in accordance with the laws in force in the country in question.

doc1

d-COPIA18MF

The Olivetti d-COPIA 18MF is a multi-function digital system designed to provide professionals and small work groups with all the solutions they require. It delivers network copying and printing, colour scanning and also fax transmission. The powerful print controller which supports PCL and PostScript 3 emulation (for Macintosh user) promotes a truly effective management of functions such as direct printing from PDF.
MULTIFUNCTIONAL DIGITAL COPIER
PRINTING AND COPYING SPEED OF 18 PPM 50-SHEET DOCUMENT FEEDER 96 MB STANDARD MEMORY EXPANDABLE TO 320 MB PCL AND KPDL 3 EMULATIONS 600-DPI COLOUR SCANNER OVERALL PAPER CAPACITY OF 550 SHEETS
Low operating cost and consistent output are guaranteed by longlife components: the drum is designed to last for the entire service life of the product, only the toner cartridge must be replaced.
Parallel, USB and Fast Ethernet connections
50 sheet document feeder (optional)
250-sheet second paper cassette

TECHNICAL SPECIFICATIONS

Type desktop/console Technology Speed Resolution Desktop Laser, mono-component 18 cpm/ppm 600 x 600 dpi during scanning and copying, 1200 dpi (1800 x 600) with KIR2 Windows 98/98SE/Me/NT4.0/2000/XP 96-MB standard memory (max. 320 MB with an additional 64/128/256MB DIMM slot) 1 x 250-sheet universal cassette (60-105 g/m2) 50-sheet bypass (60-163 g/m2) Maximum: 550 sheets 150 sheets face down, 30 sheets face up 9.5 seconds 1-999 Books, sheets, 3D objects Manual/automatic, 7 levels 50% - 200% (1% increase) PowerPC 750CXr, 300MHz IEEE 1284 parallel bidirectional, USB 2.0 (High Speed) Ethernet 10Base-T/100Base-TX PCL6 (5e, XL, PJL), KPDL3 (PostScript3 compatible), Line Printer, IBM Proprinter X24E, Diablo 630, Epson LQ-850 Flat bed with CCD image sensor 600, 400, 300, 200 dpi (256 shades of grey) Colour and b/w Text, Photo,Text & Photo, OCR mode A4, Folio TIFF (b/w only), PDF, JPEG (colour only) PSTN 600x600 dpi ITU-T Super G3 JBIG, MMR, MR, MH 33.6 Kbps 3 seconds or less Capacity: 50 sheets (50-120 g/m2) Format of the original: A4R-A5R, Legal, Folio Dimensions and weight 455 x 331 x 93 mm, around 2.3 kg Network protocol Fonts Other functions Warm-up time Power supply Consumption Noise level (ISO 7779) Dimensions (WxDxH) Weight Toner cartridge (with 5% coverage) 20 seconds or less 220-240 Vac, 50/60 Hz Printing: 409 W Stand-by: 76 W Energy saving: 40 W Copy/print: 65 dB(A) Stand-by: 43 dB(A) 496x421x385 mm 14.5 kg (without toner cartridge) Provided with the machine: up to 3,600 pages (A4) Toner cartridge standard (B0526): up to 7,200 pages (A4) One scan several copies, exposure adjustment, automatic and manual zoom selection, selection of the position of the original, automatic or manual selection of paper source, print interrupt mode, stapling, combine mode (2 in 1, 4 in 1), continuous copying, energy saving mode, automatic stand-by mode, sending of end-of-job report TCP/IP 80 outline fonts, 1 bitmap font (PCL, KPDL), 45 types of single-dimensional bar-codes and a bi-dimensional bar-code (PDF-417) Direct printing of PDF files, print IPP, print e-mail TCP/IP MMR/JPEG IBM PC/AT compatible Ethernet 10/100Base-TX, USB 2.0 (TWAIN only) PaperPort Deluxe 9.2 Scan-to-Email, Scan-to-FTP, Scan-to-SMB, TWAIN, LDAP 3.5 MB. memory backup 60 minutes 2.5 seconds A4R, Folio JBIG, MMR, MR, MH 33.6 Kbps Capacity: 250 sheets (60-105 g/m2) Dimensions and weight: 378x375x79 mm, around 2 kg

GENERAL COPIER

NETWORK PRINTER

Operating systems Memory

Paper capacity Output tray capacity Time to first copy Continuous copies Originals Method of exposure Zoom CPU Interfaces

Emulations Scanning system

NETWORK COLOUR SCANNER

Print functions Network protocol Compression method Hardware compatibility Interfaces Software Capabilities Memory Scanning speed Max. scanning format Compression mode Modem speed
Resolution Type of original Max. scanning format Image format

NETWORK FAX (opt)

Lines Resolution Compatibility Data compression system Modem speed Transmission speed

OPTIONS

Automatic original feeder (DP-100)

Paper cassette (PF-17)

Product performances are referred to an appropriate use under optimal conditions. With the right to change technical specifications. The registered trademarks are the property of their respective owners. d-Copia 18MF is distributed by Olivetti S.p.A. (10/06) - Code: 25043-01 OLIVETTI S.P.A. VIA JERVIS IVREA (TO) ITALY www.olivetti.com

 

Tags

F5D7230 SC-HT740 X-300 Automatic-2004 SPD-30 FX770 TX802 ML-1630 XRS9775 Lafinion 72 Canon S100 WD-10180TP Dista F700 Asko T780 VP-MX20R Blockline 2000 AT-201 WP 12 Salton GR82 I915gmie Activity 2600 ALL-IN-ONE Photosmart 7150 MHC-GR10AV 4 5 MF6560PL Series DCP-1400 Gpsmap 525S Tecra S5 MS-430 U KX-TC1447B MX46L DVA-9861RI AGA850-P Selio ICF-C703 ZM24STX Ixus110 IS VGN-FZ21MR Toner Espio 105G 85919 Imagerunner 2530 WM-FX453 L1950SQ-SN R-SG7 SPH-A900 AZ2558 4V MV VPC-E7EX KP-FX532m91 Set-TOP Factor Delonghi EC7 Kwavx706J-KW-avx706 CQ-C1303 Rookie DCR-DVD506E 1200 GTL CDP-XA30ES TG500 Ultra Zoom SPH-W2900ML MRA-F355 CDX-M8805X B1544N0 B2100 K 1000 KX-F5000 GD-5000 Sevilla MP38 VSX-418-S CZ-21M163N DES-1252 3235C MCD183 Asko T761 Sbcru111 Stopwatch S321 Xemio-360 W Robbe 8427 TM-L60II D-NE300 NAD T524 AN-200 F1-4000T LAV72640 Idect Z10I HD160JJ P L196WTQ-WF Simulator 2000 KX-P7100 DVD-S224 32PFL9632D X4250 GW73E-WB Usd III Landiao I7 SE4401S

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101