Pro Gamer Command Unit manual.qxd

12/6/2005

10:06 AM

Page 1

Saitek

Pro Gamer Command Unit

Page 2
SAITEK PRO GAMER COMMAND UNIT

Introduction

The Saitek Pro Gamer Command Unit is a backlit USB device for first person shooter / strategy gaming. The unit is adjustable to suit the user's hand size, and also features laser-etched keys that allow the ultra blue, red or green backlighting to glow through making it possible to read the keys in the dark. Standard keyboard buttons; number and layout as follows: 11 standard (main) keys in 2 rows of 4, and 1 row of 3: 3 pinkie buttons to left-hand side of main keys; 4 function buttons positioned behind the main keys for easy access; 2 thumb buttons; 3-position Mode switch (Blue = Default - no profile, Green = Loads profile for FPS Mode, Red = Loads profile for Real-Time Strategy Mode). Fully programmable using Saitek Smart Technology Software (SST); with 20 buttons, 1 shift function, 3 mode states & 4-way analog mini-stick for up to 144 programmable commands.
3 mode states with different colored LEDs to indicate which is in use ultra blue, green or red key backlighting
4-way digital hat, which will be recognised by the operating system as the x and y axis Thumb pad adjuster screw Adjustable thumb pad with 4-directional tilt mechanism

Page 3

GETTING STARTED
Installation for Users of Windows XP and Windows XP64
1. 2. 3. 4. 5. 6. 7. 8. 9. With your computer switched on, close down any programs that are currently running and insert the Saitek Smart Technology CD into your CD-ROM drive. When the Introduction Screen appears, click Install Software to continue. If the CD does not run automatically, select Start from the Windows Taskbar, then Run and type D:\Setup.exe and click OK - where D:\ is letter of your CD-ROM drive. When the Welcome screen appears, click Next to continue. After reading the Disclaimer, select the I accept the terms of the Disclaimer option and click Next to continue. At the Driver Setup screen, if you haven't already done so, plug the USB cable of your controller into one of your computer's USB ports and click on Next. At the Driver Setup screen, click Next to test your controller. When the Saitek Controller screen appears, try out all your controller's buttons and controls to show that it is working properly. When you have finished, click OK. At the Software Setup screen, select Install the SST Programming Software and click Next. In the following Software Setup screen, click Next and follow the on-screen instructions. At this point you will be asked to install such features as the Saitek Magic Mouse, HID-compliant mouse, Saitek Magic Keyboard and HID Keyboard Device (these are what XP calls the various elements of your Saitek controller). Continue to click on Next and Finish to accept the installation until the Registration screen appears.
10. At the Registration screen, select Check this box to register now and follow the on-screen instructions, or do not select this option and register later. 11. Upon completion of the installation, you have the option to Run Profile Editor, which will give you a view of the 3D programming environment. If you do not wish to see the Profile Editor at this point, just uncheck the box and click on Finish to complete the installation.
Installation for Users of Windows 2000
1. 2. 3. 4. 5. 6. 7. 8. With your computer switched on, close down any programs that are currently running and insert the Saitek Smart Technology CD into your CD-ROM drive. When the Introduction Screen appears, click Install Software to continue. If the CD does not run automatically, select Start from the Windows Taskbar, then Run and type D:\Setup.exe and click OK - where D:\ is letter of your CD-ROM drive. When the Welcome screen appears, click Next to continue. After reading the Disclaimer, select the I accept the terms of the Disclaimer option and click Next to continue. At the Device Driver Installation screen, click on Next and follow the on-screen instructions. When prompted, plug the USB cable of your controller into one of your computer's USB ports and click on Configure. When the Controller Properties screen appears, click Next to view the Test screen. Now try out all your controller's buttons and controls to show that it is working properly. When you have finished, click OK.
10. At the Programming Software screen, select Advanced User and click Next. 11. At the Programmable Controller Drivers screen, click Update and follow the on-screen instructions.

Page 4

12. Then at the Installation of programming software successful screen, click Next. 13. At the Registration screen, select Register and follow the on-screen instructions or select Register Later and click Next. 14. Upon completion of the installation, you have the option to Run Profile Editor, which will give you a view of the 3D programming environment. If you do not wish to see the Profile Editor at this point, just uncheck the box and click on Finish to complete the installation.

IMPORTANT INFORMATION

A Word on Driver Updates
From time to time there may be updates to the driver and programming software for this product. You can check for the latest software updates by visiting the Saitek website and clicking on Downloads. A drop down menu will appear. Select Drivers and Software.
For Windows XP and XP64 users; Dynamic updates
If you are using the SST Programming software then you will need to obtain an updated version to work with the new drivers that you have downloaded from Windows update. To obtain the new version of the software, open the Game Controllers icon in Control Panel, select the controller in the window and click Properties. At the top of the Properties window click the About tab and you will see a link that says Click here to download the SST Programming Software. Click on the link and Windows will give a download prompt asking if you want to open the file or save it. Choose to save it to your preferred location on your computer's hard disk and the file will start downloading. Once the file has downloaded, find it on your hard disk and double click on it to install the programming software.
Enabling Your Controller in Game
Most games support game controllers, which you can enable by using a [control] options menu within the Main Menu of the game itself. If you are having trouble working out how to do this or if you're unsure whether the game being used supports game controllers, please refer to the user manual for that game for more help.
How to Test your Controller
You can do this at any time by Clicking on Start, then Settings and selecting Control Panel in Windows (XP users may only need to click on Start and then Control Panel) Look for an icon called either Game Controllers or Gaming Options (XP users may have to click Printers and Other Hardware first). Open the Game Controllers/Gaming Options window then the name of your controller should show up. Click on Properties and this will bring up the test screen. Moving your controller and pressing the buttons should result in a response in this screen; if there is a response you know that the controller is functioning correctly.

Page 5

PROGRAMMING YOUR SAITEK CONTROLLER WITH SAITEK SMART TECHNOLOGY PROGRAMMING SOFTWARE
Introducing Saitek Smart Technology Programming Software
Saitek Smart Technology Programming Software (SST) is the software Saitek supplies to configure your Saitek controller for enhanced functionality. SST delivers a powerful set of features, allowing you to program your device with the ultimate configuration for total interaction. Despite a level of sophistication previously unseen in the market, and because of the Saitek Smart Technology inside, the software remains simple and intuitive to use. For a complete guide on how to program your Saitek controller, visit the Saitek website at www.saitek.com.
Features of Smart Technology Programming Software:
Quick and easy setup in any game Personalize the controller settings for your favorite games Configure your controller with an on-screen 3D model and interface Multiple setup option for each controller - ideal if a controller is used by several people Program special moves with sophisticated timing features Special game setups available as 'Profiles' from the Saitek website and on the Smart Technology CD Download the latest version of Saitek Smart Technology software from the Saitek website

What is a Profile

A Profile is a custom setup for improved gameplay - consisting of a set of commands that are pre-assigned to the buttons or axes of your controller. There are three pre-written Profiles available on the Product Companion Disk that accompanies this device - one default, one designed for First Person Shooter (FPS) games and another for Real Time Strategy Games (RTS). Please also check the Saitek Website (www.saitek.com) for new profiles which will be added for the Pro Gamer Command Unit.

Page 6

Pro Gamer Command Unit buttons and pre-programmed modes
The following table outlines which Command Unit controls correspond to which commands in the FPS and RTS modes. The 3-position Mode switch on the top left of the unit selects between Blue (Default), Red (RTS Mode) and Green (FPS Mode).

How Do I Program My Controller?
After getting to know your controller, you can start creating your own personal Profiles with the Saitek Smart Technology programming software (SST). This software has virtually unlimited programming capabilities and allows you to customize the controller to your exact gaming needs. The Profile Editor allows you to program the buttons on your controller to perform different actions within your games - this is especially useful if the game you are using does not have its own screen that allows reconfiguring of your buttons. Default (blue) 21 (Shift button) X Axis - 66-100% X Axis - 0-33% Y Axis - 66-100% Y Axis - 0-30% FPS Mode (green) q w e r a s d f z x c Tab Left shift Left ctrl Space Left alt b g ] [ RTS Mode (red) f Up arrow Backspace m Left arrow Down arrow Right arrow g r t c Tab Left shift Left ctrl Left alt Backspace F1 F2 F4 F4 End Home Page up Page down

Page 7

Getting Started
1. 2. 3. 4. 5. 6. 7. Double-click on the Saitek Smart Technology icon the install left on your desktop. In the Profile Editor, choose the control to which you wish to assign a keyboard command. You do this by left-clicking on the control's cell in the control list on the right of the screen. With the cursor flashing, type in the key commands and then click on the green tick mark when complete. Repeat this procedure for all the buttons you would like to program and then click File, Save at the top of the Profile Editor window. Give the profile a name (it is recommended you name it after the game for which the profile is intended) and then click Save. To enable the profile either click the Profile Now icon at the top of the Profile Editor (it looks like a black and yellow crosshair) or right-click on the controller icon in your taskbar and select the name of the profile from the pop-up list of options. You will notice that when a profile is loaded that the controller icon in your taskbar has a green square behind it, indicating that a profile is currently loaded. If you wish to unload a profile simply right-click on the controller icon and click Clear Profile from the pop-up list of options.
If you require more detailed assistance with using the SST Programming Software, click on Help at the top of the Profile Editor and then Manual.

Technical Support

Can't get your controller to work - don't worry, we're here to help you! Nearly all the products that are returned to us as faulty are not faulty at all - they have just not been installed properly. If you experience any difficulty with this product, please first visit our website www.saitek.com. The technical support area will provide you with all the information you need to get the most out of your product and should solve any problems you might have. If you do not have access to the internet, or if the website cannot answer your question, please contact your local Saitek Technical Support Team. We aim to offer quick, comprehensive and thorough technical support to all our users so, before you call, please make sure you have all the relevant information at hand. To find your local Saitek Technical Support Center , please see the separate Technical Support Center sheet that came packaged with this product.

Conditions of Warranty

1. 2. 3. 4. Warranty period is 2 years from date of purchase with proof of purchase submitted. Operating instructions must be followed. Specifically excludes any damages associated with leakage of batteries. Note: Batteries can leak when left unused in a product for a period of time, so it is advisable to inspect batteries regularly. Product must not have been damaged as a result of defacement, misuse, abuse, neglect, accident, destruction or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by any person or party other than our own service facility or an authorized service center, use or installation of non-Saitek replacement parts in the product or the modification of this product in any way, or the incorporation of this product into any other products, or damage to the product caused by accident, fire, floods, lightning, or acts of God, or any use violative of instructions furnished by Saitek plc. Obligations of Saitek shall be limited to repair or replacement with the same or similar unit, at our option. To obtain repairs under this warranty, present the product and proof of purchase (eg, bill or invoice) to the authorized Saitek Technical Support Center (listed on the separate sheet packaged with this product) transportation charges prepaid. Any requirements that conflict with any state or Federal laws, rules and/or obligations shall not be enforceable in that particular territory and Saitek will adhere to those laws, rules, and/or obligations.

Page 8

When returning the product for repair, please pack it very carefully, preferably using the original packaging materials. Please also include an explanatory note. IMPORTANT: To save yourself unnecessary cost and inconvenience, please check carefully that you have read and followed the instructions in this manual. This warranty is in lieu of all other expressed warranties, obligations or liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product.

Important notice

In certain circumstances, using a keyboard-type unit may cause injury to hands, wrists, arms, back or neck. If you do experience pain, numbness or weakness in these areas during or after using the keyboard, seek help from a qualified medical professional. The following guidelines will minimise the risk of injury: Adjust your chair height and distance from the keyboard so your wrists are straight. Keep your shoulders relaxed with your elbows at your side. Position your keyboard and mouse so you don't have to reach. Take frequent breaks to rest your hands and arms. Leave your computer and walk around at least twice an hour and try to vary what you do during the day. Avoid resting your wrists on sharp edges and if you have a wrist or palm rest, don't use it while typing.
Information for Customers in the United States FCC Compliance and Advisory Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and; 2 This device must accept any interference received, including interference that may cause undesired operation.

Page 9

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help. Saitek Industries, 2295 Jefferson Street, Torrance, CA 90501, USA

Page 10

La Pro Gamer Command Unit de Saitek est un priphrique USB rtro-clair conu pour les jeux de type FPS (First Person Shooter) ou stratgie. Cette unit, ajustable de faon s'adapter la taille de la main de l'utilisateur, intgre des touches laser qui permettent au rtro-clairage ultra bleu, vert ou rouge de luire et sont ainsi lisibles dans le noir. Touches de clavier standard ; nombre et configuration : 11 touches (principales) standard sur 2 ranges de 4, et 1 range de 3; 3 boutons pinkie gauche des touches principales ; 4 boutons de fonction placs derrire les touches principales pour une facilit d'accs ; 2 boutons pouce ; slecteur de mode 3 positions (Bleu = rglage par dfaut - pas de profil, Vert = charge le profil pour le mode FPS, Rouge = charge le profil pour le mode RTS). Entirement programmable grce au logiciel Smart Technology Software (SST) de Saitek ; avec 20 boutons, une fonction " shift ", 3 modes disponibles & un mini-stick analogique 4 directions, permettant de programmer jusqu' 144 commandes.

CYBORG 3D FORCE STICK

USER MANUAL
POV Hat Switch 4 Fire Buttons Trigger

Throttle

4 Buttons
SAITEK CYBORG 3D FORCE STICK
The Saitek Cyborg 3D Force Stick is the ultimate controller for the discerning gamer. This awesome joystick comes complete with sublime new looks and Immersions patented TouchSense technology to take the gaming experience to a new level of interactivity. The haptic technology inside dramatically improves gamers performance and power by unlocking their sense of touch and allowing them to feel what they see and do on the computer screen. The Force Feedback Technology is combined with a full range of features to put you in total control of the game.

Main Control Features

Rapid-Fire Trigger - with instant response when you most need it 8 fully programmable fire buttons deliver personal controller settings Dual handle throttle for left- or right-handed gaming 8-way point-of-view hat switch for peripheral vision in 3D games or changing weapons 3D Rudder Twist on handle for increased realism in flight sim games Simple plug-and-play USB connection

GETTING STARTED

Note: Please do not connect your Cyborg 3D Force until asked to by the installation procedure.
Before connecting the Cyborg 3D Force to your PC, you need to connect it to your mains supply using the AC/DC adapter (supplied). This attaches via the front of the unit next to the USB cable. Note: When you have finished playing with your Cyborg 3D, we recommend you switch off the power adapter at the mains and unplug it.
Saitek Smart Technology Software
Saitek Smart Technology software is the software that Saitek supplies for our high-end game controllers. The Smart Technology software comprises the product drivers for these Saitek controllers and the optional programming software. By keeping the two separate, the Smart Technology software offers two types of installation to suit the individual gamers needs, which means even more gamers can enjoy these quality Saitek products. The Quick Install loads the product drivers only (all that is needed to use the controller) and is suitable for the new or Typical User. This install is fast and simple and will have the gamer up and running in no time at all. The Full Install loads the product drivers and the Saitek Smart Technology programming software and is suitable for the Advanced User. The programming software delivers a powerful set of features for the ultimate configuration in the game. Although it is recommended for the seasoned gamer, it can be installed at any time. This gives the typical user a chance to get to know the controller before taking gaming to the next level.
INSTALLATION FOR USERS OF WINDOWS XP
Quick Install (Drivers Only)
This installation will ONLY install the drivers for your Saitek controller. The Full Install (below), will install the drivers and the Saitek Smart Technology programming software for your Saitek controller. Note: Please do not connect the USB connector until asked to by the installation procedure. With your computer switched on, close down any programs that are currently running and insert the Saitek Smart Technology CD into your CD-ROM drive. When the Welcome screen appears, click Next to continue. (If the CD does not run automatically, select Start from the Windows Taskbar, then Run and type D:\Install.exe and click OK - where D:\ is letter of your CDROM drive). After reading the Disclaimer, select the I accept the terms of the Disclaimer option and click Next to continue. At the Device Driver Installation screen, click on Next and follow the on-screen instructions. When prompted, plug your USB connector into your computer, then click on Configure and then Continue Anyway. Follow the on-screen instructions until you reach the Controller Properties screen.

When the Controller Properties screen appears, click Next to view the Test screen. Now try out all your controllers buttons and controls to show that it is working properly. When you have finished, click OK. At the Programming Software screen, select Typical User and click Next. At the Registration screen, select Register my Saitek controller online, click next and follow the on-screen instructions or select Register Later and click Next.
10 Click on Finish to complete the installation. Your Saitek controller is now ready for use with your favorite games.
Full Install (Drivers and Programming Software)
This installation will install the drivers and the Saitek Smart Technology programming software for the Saitek controller. Follow points of the install procedure in Quick Install (Drivers Only), then at the Programming Software screen, select Advanced User and click Next. At the Programmable Controller Drivers screen, click Update and follow the on-screen instructions. At this point you will be asked to install such features as the Saitek Magic Mouse and Saitek Magic Keyboard (these are what XP calls the various elements of your Saitek controller). Continue to click on Next, Continue Anyway and Finish to accept the installation until the Installation of programming software successful screen appears. At the Installation of programming software successful screen, click Next. At the Registration screen, select Register my Saitek controller online, click next and follow the on-screen instructions or select Register Later and click Next. Upon completion of the installation, you have the option to Run Profile Editor, which will give you a view of the 3-D programming environment. If you do not wish to see the Profile Editor at this point, just uncheck the box and click on Finish to complete the installation. Your Saitek controller is now ready for use with your favorite games. To access the programming software click on the Saitek Smart Technology icon that the installation left on your Desktop.
For a complete guide on how to program your Saitek controller, visit the Saitek website at www.saitek.com.
INSTALLATION FOR USERS OF WINDOWS 2000
This installation will ONLY install the drivers for your Saitek controller. The Full Install (below), will install the drivers and the Saitek Smart Technology programming software for your Saitek controller. Note: Please do not connect the USB connector until asked to by the installation procedure. With your computer switched on, close down any programs that are currently running and insert the Saitek Smart Technology CD into your CD-ROM drive. When the Welcome screen appears, click Next to continue. (If the CD does not run automatically, select Start from the Windows Taskbar, then Run and type D:\Install.exe and click OK - where D:\ is letter of your CDROM drive). After reading the Disclaimer, select the I accept the terms of the Disclaimer option and click Next to continue. At the Device Driver Installation screen, click on Next and follow the on-screen instructions. When prompted, plug your USB connector into your computer, then click on Configure. When the Controller Properties screen appears, click Next to view the Test screen. Now try out all your controllers buttons and controls to show that it is working properly. When you have finished, click OK. At the Programming Software screen, select Typical User and click Next. At the Registration screen, select Register my Saitek controller online, click next and follow the on-screen instructions or select Register Later and click Next.

This installation will install the drivers and the Saitek Smart Technology programming software for the Saitek controller. 1 Follow points of the install procedure in Quick Install (Drivers Only), then at the Programming Software screen, select Advanced User and click Next.
At the Programmable Controller Drivers screen, click Update and follow the on-screen instructions. Then at the Installation of programming software successful screen, click Next. At the Registration screen, select Register my Saitek controller online, click next and follow the on-screen instructions or select Register Later and click Next. Upon completion of the installation, you have the option to Run Profile Editor, which will give you a view of the 3-D programming environment. If you do not wish to see the Profile Editor at this point, just uncheck the box and click on Finish to complete the installation. Your Saitek controller is now ready for use with your favorite games. To access the programming software click on the Saitek Smart Technology icon that the installation left on your Desktop.
INSTALLATION FOR USERS OF WINDOWS 98 AND ME
This installation will install the drivers for the Saitek controller only. Note: Please do not connect the USB connector until asked to by the installation procedure. 3 With your computer switched on, close down any programs that are currently running and insert the Saitek Smart Technology CD into your CD-ROM drive. When the Welcome screen appears, click Next to continue. (If the CD does not run automatically, select Start from the Windows Taskbar, then Run and type D:\Setup.exe and click OK). After reading and accepting the Disclaimer, click Next to continue. Note: For your controller to work, you must have a minimum of Microsoft DirectX 8.1 installed on your computer. The installer will automatically recognize if this software needs to be added, and will allow you to install it directly from the Saitek Product Companion CD, if necessary. If you are asked to install Microsoft DirectX 8.1, click Install and follow the on-screen instructions, and then restart your computer when prompted. Make sure that you leave the Saitek CD in the drive when restarting. After this software has been installed, you will automatically be taken to the installation to continue with the next step.

Follow the on-screen instructions and select Yes, I want to restart my computer now when prompted. After the restart, at the Device Driver Installation screen, click on Next and follow the on-screen instructions. When prompted, plug your USB connector into your computer. When the Controller Properties screen appears, click Next to view the Test Screen. Now try out all your controller buttons and controls to show that it is working properly. When you have finished, click OK. At the Programming Software screen, select Typical User and click Next.
10 At the Registration screen, select Register my Saitek controller online, click next and follow the on-screen instructions or select Register Later and click Next. 11 Click on Finish to complete the installation. Your Saitek controller is now ready for use with your favorite games.
This installation will install the drivers and the Saitek Smart Technology programming software for the Saitek controller. Follow points of the install procedure in Quick Install (Drivers Only), then at the Programming Software screen, select Advanced User and click Next. At the Programmable Controller Drivers screen, click Update and follow the on-screen instructions. At this point you will be asked to insert your Windows CD, however, DO NOT do this, just click on OK. At the next screen, type C:\windows\system into the prompt and click OK and follow the on-screen instructions. At the Installation of programming software successful screen, click Next. At the Registration screen, select Register my Saitek controller online, click next and follow the on-screen instructions or select Register Later and click Next. Upon completion of the installation, you have the option to Run Profile Editor, which will give you a view of the 3-D programming environment. If you do not wish to see the Profile Editor at this point, just uncheck the box and click on Finish to complete the installation. Your Saitek controller is now ready for use with your favorite games.
Installing the Programming Software at a Later Date If you chose the Quick Install (Drivers Only) you might want to install the Saitek Smart Technology programming sofware once you have mastered your new Saitek controller. To do this, simply reinstall your controller following the Full Install (Drivers and Programming Software) above.

PROGRAMMING YOUR SAITEK CYBORG 3D FORCE WITH SAITEK SMART TECHNOLOGY PROGRAMMING SOFTWARE
Introducing Saitek Smart Technology Programming Software
Saitek Smart Technology Programming Software (SST) is the software Saitek supplies to configure your Saitek controller for enhanced functionality. SST delivers a powerful set of features, allowing you to program your device with the ultimate configuration for total interaction. Despite a level of sophistication previously unseen in the market, and because of the Saitek Smart Technology inside, the software remains simple and intuitive to use. Features of Smart Technology Programming Software:
Quick and easy setup in any game Personalize the controller settings for your favorite games Configure your controller with an on-screen 3D model and interface Multiple setup option for each controller - ideal if a controller is used by several people Program special moves with sophisticated timing features Special game setups available as Profiles from the Saitek website and on the Smart Technology CD Download the latest version of Saitek Smart Technology software from the Saitek website

What is a Profile?

A Profile is a custom setup for improved gameplay consisting of a set of commands that are pre-assigned to the buttons or axes of your controller. There are over two hundred pre-written Profiles available on the Saitek Smart Technology Disk that accompanies this device or on the Saitek Website www.saitek.com. (Please check the website for new or improved Profiles, which are being added regularly).
How do I program my Cyborg 3D Force?
After getting to know your Cyborg 3D Force, you can start creating your own personal Profiles with the Saitek Smart Technology programming software (SST). This software has virtually unlimited programming capabilities and allows you to customize the Cyborg 3D Force to your exact gaming needs. For a full guide to programming your Saitek Cyborg 3D Force, see the Saitek Smart Technology - Programming Guide on the CD under D:\Eng\SSTProgrammingManual.pdf or on the Saitek website: www.saitek.com.
Creating a Profile for a Game

5 Open the SST software by double-clicking on the Smart icon the installation left on your desktop. Next, double-click on New Game Wizard and then click on Next. You will now see a list of all the.exe files on your PC to which SST can be assigned. Highlight the name of the game you wish to create a Profile for, eg, tomb4.exe, then click Next. On the following screen, click Next, then leave both options ticked in the Auto Activation screen and click on Next again. Select your controller from the list and click on Next once more. In the Button Assignments screen, leave the box unchecked and click Next
Finally, review the information offered on the Summary screen and click on Finish. To view your new Profile within the 3D Windows Explorer view, click on the new Profile and then on Saitek Cyborg 3D Force.
Adding Commands to the Profile
Once you have created or imported a Profile for a game, you can add new commands to your buttons and controls by using SST. This will allow you to personalize your Cyborg 3D Force for your exact gaming needs. 1 In the Explorer view you will now see a folder for the your new profile. Double-click on the folder and you will see it open out to show 2 sub-folders - the Command List and Saitek Cyborg 3D Force. Click on the folder called Saitek Cyborg 3D Force and a 3D model of the controller will appear on the screen. If you place the mouse pointer on the 3D model and hold down the left mouse button, you can rotate the image.
4 Next, click on any control of the on-screen 3D image of Cyborg 3D Force. You will see that the control turns blue (indicating that it is ready for programming) and that the text boxes at the bottom of the screen show its attributes. 5 The long bar at the bottom of the screen is the Command Editor. Simply click on and highlight the current keyboard setting and replace it by pressing the new keyboard command. Hint: If you look in the manual that came with your game, it will tell you what keyboard commands are associated with what actions in the game.
WARNING: the SST automatically saves the changes you make without the use of a save button. Therefore, if you make a mistake, simply highlight the command line and retype the correct entry.
Adding a New Profile using the Import Game Wizard
The third way to add a Profile is by using the Import Game Wizard. This option is available through the SST Explorer view and gives the user a Browse option to find and associate new Profiles. This is particularly useful for importing Profiles from other users or selecting particular files from the CD. Remember, if you are looking for files on the CD, make sure that it is in the CD-ROM drive when you start. 5 Double-click the Smart icon that the installation left on the desktop. In the Explorer view, double-click Import Game Wizard. At the Import Profile screen, click Next. In the Game type selection screen, select Exported SST File (.psi) and click Next. If selecting a Profile from the CD, click Browse and select \Profiles\ from the disc and choose the required folder for your controller. Inside the folder you will find a list of profiles available, choose your required profile, then click on open. Note: If selecting a profile from another location, click Browse to locate the file. 6 The Import Game Wizard will then search for this game/application on your PC. If the wizard cannot find it, use Browse to find the folder where the game/application was installed, eg, C:\Program Files\Age of Empires II\empires2.exe and select this.exe file and click Open. To complete the import, click Finish. The Profile is now set up and ready to use. If you want to check how your controller is now set up for these games/applications, double-click on the Saitek Smart Technology icon on your desktop, double-click on the Profile, and then the Saitek Cyborg 3D Force. You can click on the 3D model of the Cyborg 3D Force to review the command settings. Whenever you play this game (or open the application) in future, your controller will be set-up to use the new Profile.

TROUBLESHOOTING

My computer is not recognizing the Cyborg 3D Force whats wrong? Check the cable connections. Turn off the computer and then unplug your controller. Plug it back in making certain that is securely attached. Can I have another game controller connected to my PC at the same time? To avoid potential problems and conflicts, we recommend that you remove any existing game controllers before installing the Cyborg 3D Force. Do this by selecting the previously installed controller in the Game Controllers window and clicking on Remove. I have plugged in my Cyborg 3D Force using the USB connector and it has not been recognized by the computer. Your USB connection may not be enabled within the computer. You can switch it on via your computers BIOS settings (please check the documentation that came with your computer). If you are still unsure as to what to do, contact Technical Support.

TECHNICAL SUPPORT

Cant get started dont worry, were here to help you!
Did you know that nearly all the products that are returned to us as faulty are not faulty at all - they have just not been installed properly? So, if you experience any difficulty with this product, please visit our website or contact one of our friendly technical support staff who will be pleased to help you. Our website www.saitek.com is designed to help you get the best performance from your Saitek product. And if you
still have problems, we also have teams of product specialists around the world you can call for advice and support. Contact details are provided on the Technical Support Center list provided with this product. Saitek is dedicated to helping you enjoy your purchase please call us if you have any difficulties or worries.

The Saitek Website

If you have access to an Internet connection, many of your technical queries may be answered with a simple visit to the Saitek Website at: www.saitek.com The technical support area will provide you with all the information you need to get the most out of your controller, solve any problems you might have and provide you with the latest game configurations. The site also contains regularly updated material, including information about:
Current and forthcoming products Driver upgrades Game configurations (Profiles) Links to useful sites

Contacting Saitek

If you do not have access to the Internet, or if the website cannot answer your question, you will need to contact your local Saitek Technical Support Team. However, before contacting Technical Support, here are a few tips to help us to help you:
Make sure you have followed all the steps shown in this manual Check that the controller is correctly connected to your computer Confirm that your PC is functioning normally

At Saitek, we aim to offer comprehensive and thorough technical support to all of our users. So, before you call, follow the guidelines below to ensure that you have all of the information necessary for us to help you. 3
Know the problem - make sure that you are clear about the problem you are having and that you can describe the events that led up to it. Check the Troubleshooting guide in the Troubleshooting section of this manual. Know your hardware - if it is possible, have the following information to hand: The make and model of the computer you are using The name and version of the game you were using when you started having problems The make and model of your computers motherboard The make and model of your computers sound card Be ready - if possible, please try and ring whilst sitting at the computer with all the relevant information and hardware to hand. If you are having a problem with a particular game or application, make sure that you have it loaded. Be patient - we try our best to deal with customer queries as quickly as possible. At times it may be necessary to refer queries on to our specialist staff. Please be patient!
To contact your local Saitek Technical Support Center, please look up the relevant contact details on the separate Technical Support Centre sheet that came packaged with this product.
Saitek Cyborg 3D Force Force Stick User Manual V.1.1 091001
Force Feedback Powered by Immersion TouchSense Technology
Protected by one or more of the following United States Patents:
4,823,634; 5,576,727; 5,734,373; 5,844,392; 5,959,613; 5,185,561; 5,220,260; 5,389,865; 5,414,337; 5,459,382; 5,559,412; 5,589,854; 5,629,594; 5,666,138; 5,691,898; 5,701,140; 5,721,566; 5,731,804; 5,739,811; 5,754,023; 5,767,839; 5,769,640; 5,805,140; 5,825,308; 5,831,408; 5,872,438; 5,889,670; 5,889,672; 5,907,487; 5,929,607; 5,929,846; 5,956,484; 5,999,168
2001 Saitek Ltd. Made and printed in China. All trademarks are the property of threir respective owners. PS12 J45 SD2 P/N