Model A-50/80 A-70/90/90EX AP-700 AR-100/200 AR-1000 AR-2000/3000 AT-10 AT-30/80/90 AT-30R/50R AT-50/70 AT-80R/90R AX-09 AX-SYNTH
System Version Procedures
Procedure While holding the first, third, and fourth buttons under the display, press CHANNEL Power on while holding buttons 1, 3 and 5 (Caution: Back up any user settings before performing these steps. The unit will revert to factory settings) Press EXIT repeatedly to get to ANALYZER/FILTER. Cursor to MENU, press ENTER. Cursor to SYSTEM, press ENTER. Cursor to INFORMATION, press ENTER Power on while holding the DOWN (v) button Power on while holding the LEFT (<), RIGHT (>) and EXIT buttons Power on while holding SELECT While holding down the PLAY and RESET buttons, press ROTARY Power on while holding INTRO/ENDING and START/STOP. Press COUNTRY 1 Power on, then press and hold TRACK 4 and PLAY. Press MANUAL DRUMS Power on while holding INTRO/ENDING and START/STOP. Press SWING Power on, then press and hold TRACK 4 and PLAY. Press MANUAL DRUMS Power on while holding FAVORITE A, FAVORITE B, and WRITE, UtL will be displayed. Press TONE 1 uEr will be displayed, followed by the version. Power on while holding VARIATION INC/+, VARIATION DEC/-, and TONE 8.
Model BR-8 BR-532 BR-600 BR-864 BR-900CD BR-1180/CD BR-1200CD BR-1600CD Procedure Power on while holding UNDO/REDO and the TRACK 1 REC button Power on while holding V-TRACK and BOUCE ON/OFF Power on while holding the CURSOR Left (<) and Right (>) buttons Power on while holding ARRANGE/PATTERN/OFF and PROGRAM Power on while holding the CURSOR Left (<) and Right (>) buttons Power on while holding UNDO and the TRACK 1 REC button With the power on, press ENTER/YES and EXIT/NO Power on while holding UNDO and the TRACK 1 REC button
Model CA-30 CD-2 CD-2e/2i CDX-1 CR-80
Procedure Power on while Power on while Power on while Power on while Power on while
holding holding holding holding holding
MUSIC STYLE and ADVANCED SPEAKER MUTE and EXIT until the version shows in the display MENU. PAD 5, PAD FF, PAD STOP buttons 10 and 12
Model D-2 D-5 D-10/20 D-50 D-70 D-110 D-550 DEP-3/5 Procedure Power on while holding VELOCITY and ENTER Press MODE repeatedly until the ROM PLAY light comes on. While holding EXIT and EDIT, press ENTER. While holding down A/B, press the BANK 8 button Power on while holding EDIT and DATA TRANSFER Power on while holding INCREMENT and the 0 SPACE button Power on while holding the NUMBER 1 button Power on while holding PART DOWN (v), BANK DOWN (v) and ENTER Power on while holding BANK 6, NUMBER 6 and EXIT Power on while holding NUMBER and VALUE
2010 Roland Corporation U.S.

Page 1

DJ-70/70MKII DJ-1000 DJ-2000 DM-80/800 DR-3 DR-5 DR-202 DR-550/MKII DR-660/770 DR-670 DR-880 DS-330
Power on Set the EFFECT switch to Off, then power on while holding Stop/Play (/) Power while holding TAP Power on Power on while holding VARIATION PTN and VARIATION MUTE Power on while holding the square m and square A buttons Power on while holding REC and START Power on while holding TEMPO and the >/+1 button Power on while holding SONG and the #7 button Power on while holding REC and ZERO on the numeric keypad Power on while holding RESET, REWIND, and FORWARD Power on while holding LOW/SUB, UTILITY and the NUMBER DOWN (v) button
Model E-09 E-20 E-28US E-30 E-35 E-38 E-56 E-66 E-68US E-70 E-86 E-96 E-300 E-500 Other E-Series EF-303 EG-101 EM-10/20/30/50 EM-20 EM-303/505 EM-2000 EXR-3/5/7/40OR EP-75/85 EP-707 All Other ep Procedure Power on while holding WORLD 1, SPLIT, and KEYBOARD TOUCH. Power on while holding the REVERB ON/OFF button Power on while holding TONE 2 Power on while holding the REVERB ON/OFF button Power on while holding the BANK 8 button in the TONE section Power on while holding TONE 2 Power on while holding UPPER in the KEYBOARD MODE section Power on while holding PLAY in the DISK RECORDER section Power on while holding TONE 2 Power on while holding ENTER Power on while holding MIXER Power on while holding the F1 button to the right of the display While holding ACCOMP (Part Volume), press BASS and UPPER. Power off to exit While holding PART VOLUME ACCOMP, press TRACK2/BASS/ACCOMP and TRACK4/UPPER No system version displayed Power on while holding EFFECT CUE, FREQ RANGE and SYNC TYPE. Power on while holding DANCE/2 Power on while holding TONE 1, Power off to exit Power on while holding TN 5 Power on while holding MUSIC STYLE buttons 3, 5 and 7. Release those buttons, then press MUSIC STYLE button 1 Power on while holding WRITE, SHIFT and RESET/TAP TEMPO, Power off to exit Power on while holding FUNCTION and 1 Power on while holding E PIANO 3 Power on while holding MUSIC STYLE buttons 3, 5 and 7. Release those buttons, then press MUSIC STYLE button 1 No system version displayed

Model Fantom Fantom-G6/7/8 Fantom-S/S88
Procedure Power on while holding REALTIME CONTROL 1, REALTIME CONTROL 3 and RECORD With the power on, press MENU. Press F2 [System], then press F4 [Info]. With the power on, press MENU. Turn the VALUE dial to select System, then press ENTER. Press F4. Use F1[Up Arrow] and F2[Down Arrow] to select Version Info. Press

Page 2

Fantom-Xa Fantom-XR Fantom-X6/7/8 FC-200 FC-300 FG-10/100 FP-1 FP-2 FP-4/7 FP-5
EXIT to return to the main menu With the power on, press MENU. Press CURSOR Up/Down to select 1. System. Press ENTER, then F6, then F3 With the power on, press MENU. Press ENTER. Press CURSOR Right repeatedly until the version number is displayed With the power on, press MENU. Press ENTER. Press CURSOR Right repeatedly until the version number is displayed Power on while holding PEDAL 1 (Display shows last two numbers of ROM version) Power on while holding the Parameter < and > buttons. While holding SUB MENU and the UP (^) button, power on Power on while holding PIANO 1, STRINGS and CHORUS. Press FUNCTION four times (Ver. 1: REVERB LED on / Ver. 1.01: SYN STRINGS and REVERB LEDs on / Ver. 3.05: E. PIANO, SYN STRINGS and REVERB LEDs on.) Power on while holding PIANO, ORGAN, and STRINGS/PAD. JIG is displayed. Press REVERB to display the version. Power on while holding the + and buttons. Power on while holding Variation/Effects and Tempo Rhythm
Model G-70 G-600/800 G-1000 GC-8 GI-10 GI-20 GP-100 GR-09 GR-1 GR-20 GR-30 GR-33 GR-50 GR-77B/700 GS-6 GS-10 GT-3 GT-5 GT-6 GT-6B GT-8 GT-10/10B GT-Pro GW-7 GW-8 GX-700 Procedure With the power on, press MENU. Touch the screen for UTILITY, Then INFO Power on while holding F1 Power on while holding WRITE, SHIFT and RESET/TAP TEMPO. Power off to exit With the power off, connect a RRC cable from the RRC OUT to the RRC IN of a R-880. Turn the R-880 MIDI/RRC switch to RRC. Power on. (Display shows GC-8 version number) Power on while holding PARAMETER +. (Keep holding to see version number) Power on while holding SELECT and TUNER Power on while holding PREAMP and WRITE Power off, then set the MODE dial to MASTER TUNE. Set the PATCH PARAMETER dial to MAIN TONE #. Power on while holding PEDAL 4 (CPU-A #), then press PEDAL 1 (CPU-B #) Power on while holding DEC in the VALUE section. Then press ENTER Power on while holding TUNER and EXP PEDAL Power off, then set the EDIT TARGET dial to MIDI and set the PARAMETER SELECT dial to D. Power on while holding PEDAL 4, then press PEDAL 1 when the screen displays G.b.n or dCi. CPU A version is displayed, press pedal #1 to display CPU B Power on while holding COMMON, SYSTEM, and STRING SELECT Power on while holding VALUE DOWN (v), - PAGE and ENTER Power on while holding the small #4 button in the STRING SELECT section Power on while holding NOISE SUPRESSOR and HUM CANCEL Power on while holding DELAY TAP and EQ Power on while holding MASTER, PEDAL ASSIGN, TUNER/BYPASS, and UTILITY Power on while holding PEDAL ASSIGN and NAME Power on while holding MASTER, UTILITY, and MANUAL Power on while holding MASTER, UTILITY, and EZ TONE Power on while holding OUTPUT SELECT, MANUAL and TUNER Power on while holding OUTPUT SELECT and SYSTEM. Press CATEGORY/ENTER twice. Power on while holding the CHANNEL A and B buttons Power on while holding WORLD1, TONE and SONG Press MENU, use the CURSOR buttons to select VERSION, then press ENTER. Power on while holding PREAMP and SP.SIM

Page 3

Model HP-2 HP-3/7 HP-337 HP-557 HP-550G HP-555 HP-1900G HP-2800G HP-2900G HP-3800G All Other HP HPD-15
Procedure Power on while holding REC and TRACK 1. Then press TRANSPOSE. JIG appears followed by the version number Power on while holding TRANSPOSE, REC, and TRACK 2 With the power on, Press FUNCTION, TRACK 2 and PLAY simultaneously With the power on, Press METRONOME once. Then press and Hold METRONOME While holding TRANSPOSE, press TRACK 2 and 4 simultaneously Press FUNCTION to enter function mode. Then, while holding PLAY and TRACK, press FUNCTION again Press FUNCTION. While holding METRONOME and ALL SONG PLAY, press FUNCTION Press FUNCTION. While holding METRONOME and ALL SONG PLAY, press FUNCTION While holding Track buttons RHYTHM, 2 and 3, press (and hold) FUNCTION Press FUNCTION. While holding METRONOME and ALL SONG PLAY, press FUNCTION No system version displayed Power on while holding EDIT and CHAIN. Continue to hold CHAIN, release EDIT and press PATCH SELECT. While continuing to hold PATCH SELECT release CHAIN and press EDIT
Model JD-800 JD-990 JP-8000/8080 JS-5 JS-8 JS-30 Juno-D Juno-Di Juno-G Juno-Gi Juno-Stage JV-30 JV-35/50 JV-80 JV-90 JV-880 JV-1000 Procedure Press MULTI. While holding the LEFT and RIGHT cursor buttons, press EXIT Power on while holding DEC and INC Power on while holding LFO 1 WAVEFORM, 1, and 3 Power on while holding INTRO and LATIN. Press EXIT after version is displayed Power on while holding the < and > buttons. Power on while holding DEMO Power on while holding SYSTEM Power on while holding ^, v, and 9. With the power on, press MENU, then use the up/down buttons to select 2. System. Press F6 [Information], then press F3 [Version]. With the power on, press MENU, then use the up/down buttons to select 4. System and press ENTER. Press Button 6 [Information]. Press MENU. Use the CURSOR buttons to select SYSTEM, then press ENTER. Press 7 [Information], then press 3 [Info]. (WARNING: This procedure will automatically erase any customized settings!) Press LEVEL and PAN simultaneously. While holding VARIATION, press VIBRATO. While holding PERFORMANCE, press the BANK 16 button. (Observe version number.) Power off Press LEVEL and PAN simultaneously. While holding VARIATION, press VIBRATO. While holding PERFORMANCE, press the TONE GROUP 15 button Power on while holding the NUMBER 1 button Power on while holding PCM CARD-B and NUMBER buttons 1 and 8. Release those buttons, then press the BANK 8 button Power on while holding EDIT and INFO COMPARE For units with serial # ZE80899 or earlier: Press PATCH (in MODE section), then press INFO. While holding the NUMBER 6 button, press CURSOR DOWN (v) For units with serial # ZF80900 or later: Power on while holding WRITE and NUMBER buttons 1 and 8. Press the BANK 8 button Power off and set the Rear Select switch to MAC. Set the PART knob to 15 and the CATEGORY knob to KEY&ORGAN. Power on while holding down VOLUME (release after 5 seconds). Set the CATEGORY knob to PIANO to display the current version. Power off to exit Press SHIFT and ENTER simultaneously. While holding the UP (^) and DOWN (v) cursor buttons, press the VALUE knob. Power off

JV-1010

JV-1080

Page 4

JV-2080 JW-50 JX-10 JX-305
Press SYSTEM. While holding F6, press A/TONE SWITCH 1. The ROM version is displayed on the left had side of the screen Press WRITE and SONG EDIT simultaneously. Hold SHIFT and press the RIGHT (>) CURSOR button Power on while holding the H button (in the PATCH section) While holding PATCH, PTN/SONG, and TEMPO & MEASURE, press NUMBER 4, 6 & 8 in order
Model KF-90 KR-3 KR-5 KR-7 KR-15/15M KR-17/17M KR-75 KR-370 KR-375 KR-377 KR-500/3000 KR-570 KR-575 KR-577 KR-650 KR-770 KR-977 KR-1070 KR-1077 KR-3500/4500 KR-4700/5000 KR-5500
Procedure With the power on, press PLAY, PART BALANCE, and FUNCTION While holding Accomp (Part Balance), press Bass, and Upper. Power off to exit Turn on the power. While pressing PLAY and TRACK 2, press FUNCTION Turn on the power. While pressing PLAY and TRACK 2, press WONDERLAND With the power on, hold down PLAY and TRACK 2, then press GAME With the power on, hold down PLAY and TRACK 2, then press GAME While holding ACCOMP (Part Volume), press BASS and UPPER. Power off to exit (WARNING: This procedure will automatically erase any customized settings!) Press FUNCTION. While holding ONE TOUCH PIANO, press INTRO/ENDING and START/STOP simultaneously. Press POP in the STYLE GROUP section While holding TRACK 4 and PLAY, press PART BALANCE (Accomp). Power off to exit Turn on the power, Press PLAY and ACCOMP, then press FUNCTION Power on while holding MUSIC STYLE buttons A and B. (The 5 User Programs and 3 Songs will be erased) While holding PART VOLUME ACCOMP, press TRACK 2 and TRACK 4 (Composer section) simultaneously While holding TRACK 4 and PLAY, press PART BALANCE (Accomp). Power off to exit With the power on, press and hold PLAY and TRACK 2, then press FUNCTION Power on while holding ADVANCED/BASIC and SYNC STOP. Release those buttons, then press PIANO 1 While holding PART VOLUME ACCOMP, press TRACK 2 and TRACK 4 (Composer section) simultaneously With the power on, press and hold PLAY and TRACK 2, then press FUNCTION While holding PART VOLUME ACCOMP, press TRACK 2 and TRACK 4 (Composer section) simultaneously Turn on the power. While holing down PLAY and TRACK 2, press FUNCTION Power on while holding ADVANCED/BASIC and SYNC STOP. Release those buttons, then press PIANO 1 Power on while holding MUSIC STYLE buttons 3, 5 and 7. Release those buttons, then press MUSIC STYLE button 1 Power on while holding ADVANCED/BASIC and SYNC STOP. Release those buttons, then press PIANO 1

Model LVC-1N

Procedure Power on while holding MENU and ENTER
Model M-660/760 M-BD1/DC1/OC1 M-GS64 Procedure While holding EDIT, press TUNE. While holding both PART buttons, press WRITE. Press EDIT and CARD 2 simultaneously Power on while holding MUTE and MONITOR. Hold PATCH and MUTE simultaneously Power on while holding MUTE and MONITOR. Hold PATCH and MUTE simultaneously

Page 5

M-SE1/M-VS1 MC-09 MC-80 MC-303 MC-307 MC-505 MC-808 MC-909 ME-8/8B ME-10 ME-30 ME-33 ME-X Micro BR MK-80 MKS-30 MKS-70 MKS-80 MS-1 MT-32 MT-80S MT-90S MT-100 MT-120/120S MT-200 MT-300/300S MV-30 MV-8000/8800
Power on while holding MUTE and MONITOR. Hold PATCH and MUTE simultaneously Power on while holding SHIFT and the STEP 4 button Power on while holding CHAIN PLAY, REC, and ARPEGGIATOR. After viewing the version number, hold SHIFT and press STOP. When The MC-80 may now be shut down safely appears in the display, power off While holding SHIFT and SCALE/MEASURE, press the PART R button Power on while holding SONG, SYSTEM, and BPM. Power off when finished While holding TEMPO/MIXER, PTN/SONG, and PATCH, press keyboard pads 12, 14, and 16 in order. Repeatedly press pad 16 to access SYS version, CPU version, and DAT version Press SYSTEM, hold down SHIFT and press keyboard pad 14. CURSOR to Version. Press EXIT when finished Hold SHIFT and press F5. Release both, then press F6. Hold SHIFT, then press and release the part buttons in the order of 1 > 7 > 8 > 9. Press F5 Power on while holding PARAMETER RIGHT (>), VALUE UP (^) and BYPASS simultaneously Power on while holding PEDAL #2, PEDAL #3, BANK DOWN (v) and BANK UP (^) pedals Power on while holding USER/PRESET and PHRASE TRAINER ON/OFF Power on while holding GROUP SELECT and PHRASE TRAINER Power on while holding the PARAMETER RIGHT (>) button, VALUE UP (^) button and EDIT/ESC Power on while holding < and >. While holding the UP (^) and DOWN (v) cursor buttons, press VARIATION button 1, then 2, then 1, then 2, then 1, then 2, then 8 While holding MIDI CHANNEL, use the DOWN and UP buttons to select 1 in the right window. While again holding MIDI CHANNEL, press DYNAMICS twice Power on while holding VALUE Power on while holding AUTO TUNE and WRITE Power on while holding PAD 1 and PAD 8 Power on while holding the PART 4 button, RHYTHM and MASTER VOLUME Power on while holding METRONOME. Press the VALUE + button. Immediately hold the MARKER CLEAR button and press RESET With the unit on, Press SONG, 2 and PLAY simultaneously Power on while holding EXECUTE, QD-EXECUTE and LOAD Power on while holding REPEAT, SONG (blue button), and PLAY Power on while holding REPEAT, SONG (blue button), and PLAY While holding SONG and COUNT IN, press METRONOME. Power off and on to exit Power on while holding F1. The ROM version will be displayed. When Welcome to the World of Studio M is on the screen the system disk version will be displayed With the power on, Press SYSTEM then F5 INFO
Model P-55 Pad-80 PMA-5 PR-100 Prelude Pro-E
Procedure Power on while holding LEVEL LEFT (<) and PAN RIGHT (>) Power on while holding both NUMBER buttons Power off. Set COMPUTER switch to MIDI. Power on while pressing EXIT, then immediately press STOP Power on while holding EXECUTE, QD-EXECUTE and LOAD Power on while holding WORLD, TONE and V-LINK Power on while holding the REVERB ON/OFF button

Procedure

Page 6
R-05/09/HR R-5 R-8 R-8MKII R-8M R-70 R-880 RA-30 RA-50 RA-90 RA-95 RA-800 RC-50 RD-300GX RD-300SX RD-500 RD-600 RD-700GX RD-700/SX RS-5/9 RS-50/70 RSP-550 RSS-10 RSS-303 RV-70
Power on while holding the STOP button Power on while holding CONDITION and EXIT, then press ENTER Power on while holding FUNCTION and EXIT, then press ENTER Power on while holding TEMP ASGN and EXIT, then press ENTER Power on while holding CURSOR LEFT (<) and VALUE DOWN (>) Power on while holding ASSIGN and MIXER Power off. Connect an RRC cable from the RRC OUT of a GC-8, to the RRC IN of the R880. Turn the MIDI/RRC switch to RRC. Power on. (Display shows GC-8 version number.) Press CANCEL. (Display shows R-880 version number) Power on while holding START/STOP and TO ORIGINAL Insert a sustain pedal into the EXT PEDAL 1 jack. Hold the pedal down. Power on while holding the REVERB ON/OFF button Power on while holding SYNC START Power on while holding PLAY Power on while holding the F1 button to the right of the display Power on while holding PARAMETER Left and Right. Power on while holding SOUND CONTROL With the unit on, hold down EDIT and WRITE and press SOUND CONTROL Power on while holding SYNTH, E.GRAND, MKS-20 and the NUMBER 8 button Power on while holding INTERNAL TONE VARIATION 1, PART SELECT TX LOWER, and PART SELECT TX UPPER Power on while holding V-LINK With the unit on, press the EDIT button while pressing both the CURSOR RIGHT and PART SELECT(LOWER) buttons Power off when done Power on while holding PERFORM TONE, USER/PRESET and 1/PIANO Power on while holding DESTINATION TONE, ENV, and TAP TEMPO Power on while holding PROGRAM/PAGE DOWN (v), VALUE DOWN (v), PARM and CONTROL Power on while holding DEVICE ID and FUNCTION. Press DEMO PROGRAM With unit powered on, simultaneously press LEVEL, USER PROGRAM 3 and SETUP Power on while holding UP (^), DOWN (v) and WRITE. Press UP (^)
Model S-10 S-50 S-220 S-330 Procedure Power on while holding PERFORMANCE and MIDI Connect the S-50 to a CRT, then turn CRT power on. Turn on the S-50 and insert the system disk (only ver. 1.01 to 1.09 will work). Press FUNCTION, then the P1 button. Press SHIFT, then the #1 button on the ten-key pad. Press ENTER Power on while holding PERFORM and MIDI Connect the S-330 to a CRT, then turn CRT power on. Turn on the S-330 and insert the system or utility disk. Press MODE, press the DOWN (v) button three times, then EXECUTE. Press the DOWN (v) button once, then EXECUTE. Press MENU, then press DEC/NO twice Connect the S-550 to a CRT, then turn CRT power on. Turn on the S-550 while holding the #1 button. (Hold until you see Please Insert System Disk.) Insert the system or utility disk. When display says, Load next disk?, press DEC/NO. Press FUNC, then MENU. Press the DOWN (v) button, then EXECUTE. Press MENU, then the #1 button. Press DEC/NO twice Power on Press the POWER button to make the STANDBY light come on. While holding PROG and SET, press REW and FF Power on while holding SETUP and TIMECODE INT/EXT Power on while holding LOW/SUB, UTILITY and NUMBER DOWN (v)

S-750/760/770 SB-55 SBX-1000 SC-33

Page 7

SC-50 SC-55/55MKII SC-88 SC-155 SC-880 SD-35 SDE-330 SDX-330 SE-50 SE-70 SN-700 Sonic Cell SP-700 SP-303 SP-404 SP-505 SP-555 SP-606 SP-808 SPD-S SPD-11/20 SRC-2 SRV-330 SRV-3030 SX-700
Press the POWER button to make the STANDBY light come on. While holding both INSTRUMENT buttons, press both MIDI CH buttons Press the POWER button to make the STANDBY light come on. While holding both INSTRUMENT buttons, press both MIDI CH buttons Power on while holding both MIDI CH buttons, then press the PREVIEW knob immediately Press the POWER button to make the STANDBY light come on. While holding both INSTRUMENT buttons, press both MIDI CH buttons Power on while holding SYSTEM, WRITE and EXIT Power on while holding PAUSE, PROG and REPEAT Power on Power on Power on while holding NUMBER DOWN (v), VALUE DOWN (v) and UTILITY. Press WRITE Power on while holding EXIT and UTILITY. Press UTILITY, then PARAMETER LEFT (<). Press PARAMETER RIGHT (>), then CONTROL 1 Power on while holding CH-A of NOISE CANCEL and CH-A of HUM CANCEL Power on while holding SMF/AUDIO PLAYER, EFFECTS, and EXIT Power on Power on while holding FILTER+DRIVE, PITCH and DELAY Power on while holding MARK Power on while holding EXIT and ENTER Power on while holding MARK With the power on, press MENU. Press ENTER. Press and hold FUNCTION and F1. When the System Info menu shows in the display, release FUNCTION and F1, and then press F2 Version is displayed on power-up Power on while holding ALL SOUND OFF and CARD Power on while holding SELECT and EDIT Power on while holding PEAK HOLD RESET. (To read version number, DIGITAL STEREO IN A LEDs represent first digit, DIGITAL STEREO B LEDs represent second digit and DIGITAL MIX OUT LEDs represent third digit) Power on Power on while holding CATEGORY, UNIT A/B and SYSTEM Power on while holding MOD and RSS
Model TD-5 TD-6/6V TD-7 TD-8 TD-9 TD-10 TD-12

TD-20/SX TMC-6

Procedure Power on while holding PATCH LEFT (<) and INSTRUMENT RIGHT (>) Power on while holding KIT, the LEFT ARROW button and ENTER simultaneously Power on while holding SYSTEM and EDIT Power on while holding F1, F2 and F3, then press CLICK, followed by RIM With the power on, press SETUP. Hold SHIFT and press EXIT. Release SHIFT and EXIT, and press CURSOR Left and then CURSOR down. Power on while holding the DOWN CURSOR button. The version is displayed in the center of the screen Power on while holding the MIXER, AMBIENCE, and KIT buttons. When the display shows the DRUM KIT menu, release the buttons, and then press SETUP, then F3, followed by F5. The version number will show next to the word "FLASH" in the display With the TD-20s power on, press TOOLS and then press F2[INFO] Set the TRIG/HH CTRL switch on the rear panel to TRIG 6. Set the PARAMETER knob to XTALK CANCEL. Power on the unit while holding the INC and DEC buttons simultaneously

Model Procedure

Page 8

U-20 U-110 U-220

In the PLAY MODE section, press PART and RHYTHM simultaneously, to enter ROM PLAY. While holding MARK and JUMP, press ENTER Power on while holding DEC and INC Press DATA. Use the LEFT (<) and RIGHT (>) cursor buttons to select UTIL. Press ENTER. Use the LEFT (<) and RIGHT (>) cursor buttons to select ROM PLAY. Press ENTER. While holding MARK and JUMP, press ENTER
Model V-Synth V-SynthGT V-SynthXT VariOS VA-5/7 V-Bass VB-99 VF-1 VGA-7 VG-8 VG-8B VG-88 VG-99 VK-7 VK-77 VK-88 VK-1000 VP-70 VP-9000 VM-3100/Pro VS-840/EX/GX VS-880/EX/890 VS-1680/1880 VS-1824CD VS-2000CD VS-2400/2480 VT-1 Procedure Power on while holding OCT, +OCT , and the 8 button Press the SYSTEM button, then touch INFO on the touchscreen. Power on while holding PREVIEW and BANK Without a PC card inserted, turn on the power. When Part1 NO WAVE DATA is displayed, hold EXIT and press VALUE Power on while holding PIANO, ONE TOUCH and INTRO. Then press the BANK 1 button Power on while holding CURSOR down and COSM AMP Power on while holding < PAGE and NAME/KEY/BPM Power on while holding ENTER Power on while holding CHORUS and REVERB Power on while holding PLAY and SYSTEM Power on while holding the DOWN CURSOR button and the COSM BASS button Power on while holding the DOWN CURSOR button and the COSM GUITAR button Power on while holding <PAGE and NAME/KEY/BPM Power on while holding PERCUSSION SECOND, PERCUSSION THIRD and USER PRESETS. Press ORGAN PRESETS 3 Power on while holding VIBRATO AND CHORUS UPPER, VIBRATO AND CHORUS LOWER and EXT, UPPER. Power off to exit Power on while holding BANK, WRITE and H-BAR MANUAL, then release. Then, press BANK, WRITE, and H-BAR MANUAL again While holding INC and DEC, press the NUMBER 1 button, then 2, then 3, then 4, then 5, then 6, then 3 Power on while holding PLAY, VOICE >> MIDI and SYSTEM With power on, hold SHIFT and press EXIT Power on while holding the SELECT of both channels 4 and 7 until the Check Menu is displayed, then press F4. Press F4 to return to the Check Menu screen, then power off to exit Test Mode Power on while holding down MONITOR SEL and SOLO Power on while holding down CHANNEL EDIT 1 and STATUS 1 Power on while holding down TRACK SELECT / CHANNEL EDIT 1 and STATUS 1 Power on while holding down TRACK SELECT / CHANNEL EDIT 1 and STATUS 1 Power on while holding TRACK STATUS 1 and HARMONY Power on while holding CH EDIT 1 and TRACK STATUS 1 Power on while holding down the PRESET/USER button

Model W-30 W-50

Procedure Power on while holding down the F1 button Press LEVEL and PAN simultaneously. While holding VARIATION, press VIBRATO. While holding PERFORMANCE, press the BANK 15 button
2010 Roland Corporation U.S. Page 9
Model XP-10 XP-30 XP-50 XP-60/80 XV-88 XV-2020 XV-3080 XV-5050 XV-5080
Procedure While holding USER/PRESET, press +. While holding TONE VARIATION, press SEQ CTRL. (ROM Version shows approximately ten seconds later) Power on while holding CONTROLLER, -OCT and EXP A Press SEQUENCER. Hold SHIFT and ENTER, then press EXIT Press System. While holding INFO, press 0 on the ten-key pad Power on while holding EXIT. Continue to hold exit and when 128 VOICES shows in display, press UNDO/COMPARE While holding down VOLUME press VALUE. Turn CATEGORY/BANK to select UTILITY.(PIANO). When you rotate VALUE, the version is displayed. To Exit, hold VOLUME and press VALUE Power on. While holding EXIT, press the LEFT ARROW button to enter the Demo Mode. While holding UP and DOWN ARROW, press VALUE. Then while holding SHIFT, press UNDO to display the current system version Power on while holding EDIT and TONE 4 With unit on, press SYSTEM / UTILITY, then press F6

Page 10