T562 IM english

13/8/02

11:22 pm

Page 1

DVD / CD / MP3 Player

Owners Manual

ENGLISH

23/7/02

9:42 am

Page 2

Introduction SAFETY PRECAUTIONS
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE CAUTION THIS DVD PLAYER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS OWNERS MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION. USE OF CONTROLS, ADJUSTMENTS TO MODIFY PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. FRANAIS DEUTSCH NEDERLANDS ESPAOL ITALIANO PORTUGUS SVENSKA NAD is a trademark of NAD Electronics International, a division of Lenbrook Industries Limited Copyright 2002, NAD Electronics International, a division of Lenbrook Industries Limited 2 TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION EXISTS WHEN THE ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM. THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. WARNING: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. NOTE T562 is not an auto voltage DVD player. Connect only to the prescribed AC outlet, i.e., 120V 60Hz or 230V 50Hz. RECORD YOUR MODEL NUMBER (NOW, WHILE YOU CAN SEE IT) The model and serial number of your new DVD player are located on the back of the DVD player cabinet. For your future convenience, we suggest that you record these numbers here: MODEL NO.____________________________ SERIAL NO.____________________________

Page 3

Introduction TABLE OF CONTENTS
INTRODUCTION Safety Precautions.2 IDENTIFICATION OF CONTROLS Front Panel/Display window.4 Rear Panels.5 Preparing The Remote Control.7 Remote Control.8 Operation Of The T562 With The Remote Control.9 OPERATION Operation of the T562. 10 Special Playback..11-12 Screen Save. 11 Automatic Power Off Function. 11 Stopping Play. 11 Resume Play. 11 Still Picture. 11 Frame Advance. 11 Skipping chapters and tracks. 11 Scanning at High Speed. 12 Playing in Slow-Motion. 12 OSD Operation.13 Display/Titles/Menus/Subtitles. 13 Viewing From Another Angle.14 Repeat Play.14 Storing Markers in Memory.15 Zoom Feature.15 Random Play.16 Program Play.16 Playback Audio with CD, VCD, and DVD.17 Playback with MP3.17 SETUP Connecting to Surround Sound System.18-21 Dolby Digital Sound. 18 Dolby Pro Logic Surround Sound. 19 2-Channel Digital Stereo Sound. 20 DTS Sound. 21 Connecting to an Analogue Stereo System.22 Connecting to a TV Directly.23 Initial Setup Settings.24-26 Selecting Languages. 24 Selecting Video Display Mode. 25 Selecting Scan Type. 25 Selecting Signal Mode. 26 Selecting Gamma Settings. 26 Selecting Audio. 26
REFERENCE Notes on Discs.27 Playable Discs.28 Table of Languages and Their Abbreviations.29 Trouble Shooting.30 Specifications.31 Copyright Information/Macrovision Product Notice.32

SVENSKA

PORTUGUS

ITALIANO

ESPAOL

NEDERLANDS

DEUTSCH

FRANAIS

Page 4
Identification of Controls FRONT PANEL
ENGLISH FRANAIS DEUTSCH NEDERLANDS ESPAOL ITALIANO PORTUGUS SVENSKA DVD indicator VCD indicator PBC indicator for VCD MP3 indicator DTS indicator DOLBY DIGITAL indicator ANGLE indicator PROGram indicator TITLE Indicator 18 CHAPTER Indicator Operating status indicator Playback indicator Pause indicator Repeat playback mode indicators Total playing time display Title/track number display Chapter number display L R indicator 7 Power button and on/standby/off indicator PROGRESSIVE SCAN indicator DVD tray PLAY button PAUSE buttons SKIP buttons MENU button 14 SELECT/navigation buttons HDCD indicator Display window OPEN/CLOSE button STOP button SCAN buttons PROGRESSIVE SCAN button

DISPLAY WINDOW

Page 5
Identification of Controls REAR PANEL (NORTH AMERICAN VERSION)
NOTE The 12V TRIGGER IN jack is a 3.5mm monotype miniature phone jack with the centre pin the 12V signal-sense. We recommend that you use a good quality cable with shield when attaching the 3.5mm monotype plug so as to prevent false triggering of the amplifier due to electro-magnetic interference from nearby electronic equipment. The 12V-IN TRIGGER allows you to have an external 12V signal to turn ON the NAD T562 from standby. This 12V signal must be a continuous 12V signal in order to keep the T562 in the ON state. Once you remove the 12V signal the T562 will return to standby. Check the specifications of the trigger input terminal on the other components to ensure these are compatible with the T562. All 12V-TRIGGER inputs and outputs on other NAD components with a 12V-TRIGGER feature are fully compatible with the NAD T562s 12V-TRIGGER IN. Before making any connections to any 12V-TRIGGER IN make sure all components are disconnected from the AC mains. If in doubt over the connections, installation and/or operation of the 12V-TRIGGER IN connection, consult your NAD dealer or sales representative. Failure to observe the above may result in damage to the NAD T562 and/or any ancillary components attached to it. NOTE The EXT. IR IN jack is connected to the output of an IR (infrared) repeater (Xantech or similar), or the IR output of another component to allow control of the T562 from a remote location. Ask your dealer or custom installer for further details
NOTE Remove the dust protection cap from the connector and connect the optical digital cable (not supplied) firmly so that the configurations of both the cable and the connector match. Keep the dust protection cap and always reattach the cap when not using the connector to protect against dust.
DIGITAL OUT COAX Jack DIGITAL OUT OPTICAL (With Dust Protection Cap) Jack MIXED AUDIO OUT (L & R) Jacks S-VIDEO OUT Jack VIDEO OUT Jack
COMPONENT VIDEO OUT Jacks +12V TRIGGER IN Jack AUTO TRIGGER ON-OFF Switch EXT. IR IN Jack Power cord socket

Page 6

Identification of Controls REAR PANEL (EUROPEAN VERSION)

ENGLISH FRANAIS DIGITAL OUT COAX Jack DIGITAL OUT OPTICAL (With Dust Protection Cap) Jack MIXED AUDIO OUT (L & R) Jacks S-VIDEO OUT Jack Composite VIDEO OUT Jack COMPONENT VIDEO OUT Jacks VIDEO OUTPUT S-VIDEO-SCART/RGB Switch SCART/RGB OUT Jack 12V TRIGGER IN jack AUTO TRIGGER ON-OFF Switch EXT. IR IN Jack Power cord socket DEUTSCH NEDERLANDS ESPAOL ITALIANO PORTUGUS SVENSKA 6 NOTE Remove the dust protection cap from the connector and connect the optical digital cable (not supplied) firmly so that the configurations of both the cable and the connector match. Keep the dust protection cap and always reattach the cap when not using the connector to protect against dust. NOTE The 12V TRIGGER IN jack is a 3.5mm monotype miniature phone jack with the centre pin the 12V signal-sense. We recommend that you use a good quality cable with shield when attaching the 3.5mm monotype plug so as to prevent false triggering of the amplifier due to electro-magnetic interference from nearby electronic equipment. The 12V-IN TRIGGER allows you to have an external 12V signal to turn ON the NAD T562 from standby. This 12V signal must be a continuous 12V signal in order to keep the T562 in the ON state. Once you remove the 12V signal the T562 will return to standby. Check the specifications of the trigger input terminal the other components to ensure these are compatible with the T562. All 12V-TRIGGER inputs and outputs on other NAD components with a 12V-TRIGGER feature are fully compatible with the NAD T562s 12VTRIGGER IN. Before making any connections to any 12V-TRIGGER IN make sure all components are disconnected from the AC mains. If in doubt over the connections, installation and/or operation of the 12V-TRIGGER IN connection, consult your NAD dealer or sales representative. Failure to observe the above may result in damage to the NAD T562 and/or any ancillary components attached to it. NOTE The EXT. IR IN jack is connected to the output of an IR (infrared) repeater (Xantech or similar), or the IR output of another component to allow control of the T562 from a remote location. Ask your dealer or custom installer for further details

Page 7

Identification of Controls PREPARING THE REMOTE CONTROL
Insert the batteries into the remote control so you can use it to operate the T562. 1 Open the battery cover 2 Insert two batteries (AAA size) 3 Make sure to match the + and - on the batteries to the marks inside the battery compartment. 4 Close the cover NOTES ON BATTERIES Improper use of batteries may cause battery leakage and corrosion. To operate the remote control correctly, follow the instructions. Do not insert the batteries into the remote control in the wrong direction. Do not charge, heat, open or short-circuit the batteries. Do not throw the batteries into fire. Do not leave dead or exhausted batteries in the remote control. Do not use different types of batteries together, or mix old and new batteries. If you do not use the remote control for a long period of time, remove the batteries to avoid possible damage from battery corrosion. If the remote control does not function correctly or if the operating range becomes reduced, replace all batteries with new ones. If battery leakage occurs, wipe the battery liquid from the battery compartment, then insert new batteries. The batteries should last about one year with normal use. OPERATION OF THE T562 WITH THE REMOTE CONTROL This section shows you how to use the remote control. Point the remote control at the remote control sensor and press the buttons.

Page 15

Operation STORING MARKERS IN MEMORY
Storing a MARKER in the T562s memory is similar to marking your page in a book. It allows you to quickly return to any point on the disc. 1 Press MARKER during play at the starting point to be viewed (listened to) again Indicates 1/9 is stored in the memory. Up to 9 markers can be stored in the memory. RECALLING/CLEARING A MARKER 2 Press SEARCH during playback 3 Use the navigation buttons to select the marker to be recalled/cleared. 4 Press ENTER to recall a marker. Or press CLEAR to clear a marker. Play resumes from the point corresponding to the selected marker, or the selected marker is cleared. NOTE These operations work only with discs for which the elapsed playing time appears in the DVD display window during playback or stop. Some subtitles recorded around the marker may fail to appear (DVD). All the markers are cleared when the power is turned off or the disc is removed. A marker is not stored when the DVD or title menu is displayed on the TV screen. FRANAIS

ZOOM FEATURE

The ZOOM feature allows you to zoom-in and enlarges the picture on the screen to 32 times its normal size. 1 Press ZOOM during normal playback or pause. Each press of the ZOOM button changes the TV screen. The magnification level will be displayed in the upper right corner of the zoom area. 2 To resume normal playback. Press ZOOM repeatedly until the normal picture is restored. The OSD will display Zoom Off. Pressing CLEAR will also restore normal picture. NOTE Some discs may not respond to the Zoom feature. Zoom does not work on subtitles or menus included on DVD videodiscs.

Page 16

Operation RANDOM PLAY (CD)
1 Press RANDOM during normal playback or stop mode. The T562 automatically starts random playback and the PROG indicator will appear in the T562s display. 2 To resume normal playback, press RANDOM. ENGLISH FRANAIS DEUTSCH NEDERLANDS ESPAOL ITALIANO PORTUGUS SVENSKA 16 NOTE This function only works with audio CD discs. Random does not work with DVD movies. You can playback titles or tracks in random order. (Random playback) Random playback may not be possible on certain discs. If you press the SKIP button during random playback, the DVD player goes to another track randomly and starts playback.

PROGRAM PLAY (CD)

The player plays the tracks on the disc in the order you specify. 1 Press PROGRAM during stop mode. The program playback screen appears on the TV screen. To exit the screen, press PLAY or PROGRAM. 2 Press the numeric button(s)to select the desired track number. Press ENTER to store the track. Repeat step 2 to select another track. Up to 20 tracks can be programmed. 3 Press PROGRAM or PLAY to exit the screen. The selected track is stored in the memory and play now begins in the programmed sequence. If you press PROGRAM to exit the screen, the selected tracks are memorized. If you press PROGRAM after clearing Resume Play the selected programmed tracks are cleared. NOTE After playback of all programmed tracks, play is stopped. Program play function is possible only with audio CDs. It does not work with DVD movie discs CLEARING THE PROGRAM To clear the programmed tracks one by one Press navigation buttons to select the unwanted number and then press CLEAR. Press PROGRAM to exit the screen (The programs are also cleared when the power is turned off or the disc removed.)

9:43 am

Page 17
Operation PLAYBACK AUDIO WITH CD, VCD, AND DVD
CD 1 Press AUDIO during play. 2 Press AUDIO repeatedly until the desired sound is selected. VCD 1 Press AUDIO during play. 2 Press AUDIO repeatedly until the desired sound is selected. DVD 1 Press AUDIO during play. Number of the audio soundtrack language being played back. 2 Press AUDIO repeatedly until the desired language (or encoding method, channel number) is selected. NOTES When the desired language is not selected even after pressing the button several times, it means that the language is not available on the disc. When the power is turned on or the disc is removed, the language heard is the one selected at the initial settings. If this language is not recorded on the disc, only the available language on the disc will be heard. Some discs may not respond to Audio feature. ENGLISH 17 SVENSKA PORTUGUS ITALIANO ESPAOL NEDERLANDS

PLAYBACK WITH MP3

1 Load an MP3 disc. The MP3 directory menu will be displayed. 2 Press navigation buttons to select the directory where MP3 files that you want to play are located and then press ENTER. 3 Press the navigation buttons to select the desired MP3 file of the selected directory of your disc If you want to return to the previous menu, press the navigation buttons in conjunction with the ENTER button. 4 Press ENTER or PLAY to start playback of the file. FOR YOUR REFERENCE Press navigation buttons to skip to the next file or previous file during playback. TO PLAY AN MP3 FILE REPEATEDLY Press the REPEAT or REPEAT A-B buttons on the remote. TO PROGRAM MP3 FILES IN A SEQUENCE Press the PROGRAM button and the MP3 menu will open the program menu to the right of the main menu. Then select the files from any directory using the navigation buttons in conjunction with the ENTER button. One can store up to 20 files in the program sequence. The REPEAT and REPEAT A-B function as TO PLAY AN MP3 FILE REPEATEDLY.

Page 18

Setup CONNECTING TO A SURROUND SOUND SYSTEM
DOLBY DIGITAL SOUND One can enjoy the high quality dynamic sound of Dolby Digital, Dolby Pro Logic and 2 Channel Digital Stereo. ABOUT DOLBY DIGITAL SOUND Dolby Digital is the surround sound technology used in theatres showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD videodiscs by connecting the T562 to a 5.1 channel A/V receiver equipped with a Dolby Digital decoder (AC-3) or Dolby Digital processor.
ENGLISH FRANAIS DEUTSCH NEDERLANDS ESPAOL ITALIANO PORTUGUS SVENSKA
From DIGITAL OUT jack (COAXIAL or OPTICAL) 75 ohm coaxial cable or optical cable
From S-VIDEO / Component Video / Composite or SCART
S-VIDEO / Component / Composite 75Ohm coaxial or SCART cable
To enjoy Dolby Digital sound from this DVD player you need the following: DVD recorded in Dolby Digital surround format. 5.1-channel receiver equipped with a Dolby Digital decoder, or a Dolby Digital processor and power amplifier. 5 speakers and 1 sub woofer
To digital input jack of surround receiver equipped with Dolby Digital decoder (coaxial or digital).
To S-Video / Component / Composite or SCART inputs of receiver.

Connection example

Front speaker (left)

Centre speaker

Front speaker (right)
Subwoofer Rear Speaker (right surround)
Rear speaker (left surround)
TO ENJOY DOLBY DIGITAL SOUND You need to select from the OSD drop down menu, Audio, Analogue Off, and Auto, 96K or 48K. If uncertain, select Auto from the Analogue Off menu. Do not set the Digital Audio Output of this DVD player to Analogue Off unless you are connecting the DIGITAL OUT jack of the DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers (Refer to Initial Setup Settings, Audio). NOTE Refer to the owners manual of your audio equipment as well. Depending on your Dolby Digital surround sound decoder, the decode rate may be 96 or 48K. When you connect the T562 to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. The output sound of the T562 has a wide dynamic range. Be sure to adjust the receivers volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. Turn off the receiver before you connect or disconnect the T562s power cord. If you leave the receiver power on, the speakers may be damaged.

Page 19

DOLBY PRO LOGIC SURROUND SOUND One can enjoy the high quality sound of Dolby Pro Logic Surround Sound if your A/V receiver is equipped with a Dolby Pro Logic Surround Sound processor or decoder. ENGLISH
From the MIXED AUDIO L/R jacks From S-VIDEO / Component Video / Composite or SCART S-VIDEO / Component / Composite 75Ohm coaxial or SCART cable Centre speaker TV TV Rear speaker (left) Rear speaker (right)

S-VIDEO / Component / Composite 75-Ohm coaxial or SCART cable From S-VIDEO / Component Video / Composite or SCART To S-VIDEO / Component / Composite or SCART inputs of the TV. TV TV
TO ENJOY DIGITAL SOUND You need to select from the OSD drop down menu, Audio, Analogue Off, and Auto, 96K or 48K. If uncertain, select Auto from the Analogue Off menu. (Refer to Initial Setup Settings, Audio) NOTES Switch the power off on the T562 before switching the SCART/S-VIDEO switch position. Refer to the owners manual of your receiver as well. Before you connect the T562 to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. Depending on your Digital sound decoder, the decode rate may be 96 or 48K. The output sound of the T562 has a wide dynamic range. Be sure to adjust the receivers volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. Turn off the receiver before you connect or disconnect the T562s power cord. If you leave the receiver power on, the speakers may be damaged.

Page 21

DTS SOUND In order to enjoy DTS sound your A/V Receiver or processor must be equipped with a DTS Decoder. The digital output of the T562 must be set to Analogue Off and the disc must have a DTS soundtrack. There is no analogue output of the T562 for DTS soundtrack. ENGLISH
Front speaker (right) Sub woofer Rear speaker (left surround) Rear speaker (right surround) 75-Ohm coaxial cable or optical cable To the digital input of an amplifier equipped with either 75-Ohm coaxial digital input or digital optical input.
S-VIDEO / Component / Composite 75-Ohm coaxial or SCART cable From the DIGITAL OUT (COAXIAL or OPTICAL) jacks
From S-VIDEO/Component Video/Composite or SCART
TO ENJOY DTS SOUND You need to select from the OSD drop down menu of the T562, Audio, Analogue Off, and Auto, 96K or 48K. If uncertain, select Auto from the Analogue Off menu. WARNING Do not set the Digital Audio Output of this DVD player to Analogue Off unless you are connecting the DIGITAL OUT jack of this DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers (Refer to Selecting Digital Audio Output. (Refer to Initial Setup Settings, Audio) NOTES Switch the power off on the T562 before switching the SCART/S-VIDEO switch position. Refer to the owners manual of your receiver as well. Before you connect the T562 to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. Depending on your Digital sound decoder, the decode rate may be 96 or 48K. The output sound of the T562 has a wide dynamic range. Be sure to adjust the receivers volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. Turn off the receiver before you connect or disconnect the T562s power cord. If you leave the receiver power on, the speakers may be damaged.

Page 22

Setup CONNECTING TO AN ANALOGUE STEREO SYSTEM
Good quality sound of 2-Channel Stereo system can be achieved by connecting this DVD player to a receiver equipped with a two analogue audio inputs (right and left) and speaker system (right and left front speakers).
ENGLISH FRANAIS DEUTSCH NEDERLANDS ESPAOL ITALIANO PORTUGUS SVENSKA 22
From the MIXED AUDIO OUT (L & R) Jacks Audio cable
To S-VIDEO / Component / Composite or SCART inputs of the TV.
TV or monitor with audio/visual inputs
To the analogue input (L & R) amplifier equipped with analogue inputs.

Audio system

TO ENJOY GOOD QUALITY SOUND You need to select from the OSD drop down menu, Audio, Analogue On, and 48K. NOTES Switch the power off on the T562 before switching the SCART/S-VIDEO switch position. Refer to the owners manual of your receiver as well. Before you connect the T562 to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. Depending on your Digital sound decoder, the decode rate may be 96 or 48K. The output sound of the T562 has a wide dynamic range. Be sure to adjust the receivers volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. Turn off the receiver before you connect or disconnect the T562s power cord. If you leave the receiver power on, the speakers may be damaged.

Page 23

Setup CONNECTING TO A TV DIRECTLY
COMPONENT VIDEO OUT Jacks of the T562 to the component video of the TV
SCART/RGB OUT Jack of the T562 (EURO version) to the 21pin SCART of the TV Composite VIDEO OUT Jack of the T562 to the composite video of the TV
TV or monitor with audio/video inputs
NOTE The switch labeled VIDEO OUTPUT S-VIDEO-SCART/RGB is used to select between one of two outputs, the S-VIDEO and the 21-pin SCART/RGB. If one intends to connect to the S-VIDEO then slide the switch to S-VIDEO; if to the 21-pin SCART/RGB, then slide the switch to the SCART/RGB position. A 75-Ohm video and audio cables are supplied with the T562. SCART and S-Video cables can be purchased from your local NAD retailer. WARNING Do not set the Digital Audio Output of this DVD player to Analogue Off unless you are connecting the DIGITAL OUT jack of this DVD player to a TV that is equipped with an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers. (Refer to Initial Setup Settings, Audio) NOTES Switch the power off on the T562 before switching the SCART/S-VIDEO switch position. Refer to the owners manual of your receiver as well. Before you connect the T562 to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. Depending on your Digital sound decoder, the decode rate may be 96 or 48K. The output sound of the T562 has a wide dynamic range. Be sure to adjust the receivers volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. Turn off the receiver before you connect or disconnect the T562s power cord. If you leave the receiver power on, the speakers may be damaged.

NOTE Refer to the owners manual of your audio equipment as well. When you connect the T562 to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. The output sound of the T562 has a wide dynamic range. Be sure to adjust the receivers volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. Turn off the receiver before you connect or disconnect the T562s power cord. If you leave the receiver power on, the speakers may be damaged.

Page 28

Reference PLAYABLE DISCS
The T562 can play back the following discs. Disc Mark Contents Disc size Maximum playback time Approx. 4 hours (single sided disc) 12 cm DVD video discs Audio+ Video (moving pictures) 8 cm Approx. 160 minutes (double sided disc) 12 cm Audio CDs Audio 8 cm 20 minutes 74 minutes FRANAIS DEUTSCH NEDERLANDS ESPAOL ITALIANO PORTUGUS SVENSKA 28 Approx. 8 hours (double sided disc) Approx. 80 minutes (single sided disc) ENGLISH
In addition this unit can play back a CD-R or CD-RW that contains audio titles or MP3 files You cannot playback discs other than those listed above such as Video CD CD-ROM, CD-Extra, CD-G, photo CD, and CD-i discs. To do so may render the T562 permanently inoperable. REGION MANAGEMENT INFORMATION Region Management Information: This DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD player, this DVD player cannot play that disc. Please contact your dealer for the region number for your T562. NOTES ON UNAUTHORIZED DISCS You may not be able to play back some DVD videodiscs on this player if they were purchased from outside your geographic area or made for business purposes. When you try to play back an unauthorized disc, Check Regional Code appears on the TV screen.

Page 29

Reference TABLE OF LANGUAGES AND THEIR ABBREVIATIONS
Enter the appropriate code number in the Settings drop-down-menu, Other for Audio, Subtitle, Menu and/or Text. Be aware that this is a media specific feature that may not be available for all DVDs and VCDs. Code 7074 Language Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bengali; Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Code 7665 Language Faroese French Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi Croatian Hungarian Armenian Interlingua Indonesian Icelandic Italian Hebrew Japanese Yiddish Javanese Georgian Kazakh Greenlandic Cambodian Kannada Korean Kashmiri Kurdish Kirghiz Latin Code 8373 Language Lingala Laothian Lithuanian Latvian, Lettish Malagasy Maori Macedonian Malayalam Mongolian Moldavian Marathi Malay Maltese Burmese Nauru Nepali Dutch Norwegian Oriya Panjabi Polish Pashto, Pushto Portuguese Quechua Rhaeto-Romance Rumanian Russian Sanskrit Sindhi Serbo-Croatian Singhalese Code 9085 Language Slovak Slovenian Samoan Shona Somali Albanian Serbian Sudanese Swedish Swahili Tamil Telugu Tajik Thai Tigrinya Turkmen Tagalog Tonga Turkish Tatar Twi Ukrainian Urdu Uzbek Vietnamese Volapk Wolof Xhosa Yoruba Chinese Zulu

Page 30

Reference TROUBLESHOOTING
SYMPTOMS AND CORRECTION Check the following guide for the possible cause of a problem before contacting service.

SYMPTOM No power

CAUSE The power cord is disconnected
CORRECTION Plug the power cord into the wall outlet securely. Insert a disc (Check that the DVD or VCD indicator in the T562s display is lit). Select the appropriate video input mode on the TV so that the picture from the DVD player appears on the TV screen. Connect the video cable into the jacks securely. Turn on the TV. Select the correct input mode of the audio receiver so you can listen to the sound from the DVD player. Connect the audio cable into the jacks securely. Turn on the equipment connected with the audio cable. Select either Analogue On or Analogue Off depending on your hardware configuration. Clean the disc. Insert a disc (Check that the DVD or VCD indicator in the T562s display is lit). Insert a playable disc (Check the disc type, color system and Regional code). Place the disc with the playback side down. Place the disc on the disc tray correctly inside the guide. Clean the disc. Press the SETUP button to turn off the menu screen. Point the remote control at the remote sensor of the DVD player. Operate the remote control within about 23 ft (7 m). Remove the obstacle.
The power is on, but the DVD player does not work No picture

No disc is inserted.

The TV is not set to receive DVD signal output.
The video cable is not connected securely.
The connected TV power is turned off. No sound The equipment connected with the audio cable is not set to receive DVD signal output. The audio cables are not connected securely. The power of the equipment connected with the audio cable is turned off. The Audio output settings are incorrect.
The playback picture is poor The DVD player does not start playback
The disc is dirty. No disc is inserted.
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the guide.
The disc is dirty. A menu is on the TV screen.
The remote control does not work properly

The remote control is not pointed at the remote sensor of the DVD player. The remote control is too far from the DVD player. There is an obstacle in the path of the remote control and the DVD player. The batteries in the remote control are exhausted.
Replace the batteries with new ones.

Page 31

Reference SPECIFICATIONS
Video DAC Video output RGB-10 Bit Composite Video S-Video (Y/C) Component Video (Y/Pr/Pb) - US Version Euro SCART with RGB & Composite - Euro Version Progressive scan (NTSC only) x2,x4,x8,x16,x32, Still & Moving Picture PAL / NTSC 192 KHz/24 Bit MPEG-2 Decoder Built in Digital Output, Stereo on downmix output 5.1 Channel support on digital output & 2 Channel downmix analogue 5.1 Digital support on digital output & 2 channel analogue 5.1 Digital support on digital output Left and Right Channel Coaxial Output Optical Output Auto switch from PCM to bit stream 4.6 kg 6.0 kg 435mm x 285mm x 80mm
Digital Zoom TV Type Setup Audio DAC MPEG-2 Multi channel MP3 Decoder Dolby Digital HDCD DTS Down mix Digital Audio Output Others Shipping Weight Net Shipping Weight Gross Unit Dimensions (L x W x H)

Page 32

Reference COPYRIGHT INFORMATION
COPYRIGHT INFORMATION/MACROVISION PRODUCT NOTICE DIGITAL THEATER SYSTEMS NOTICE DTS and DTS Digital Surround are registered trademarks of Digital Theater Systems, Inc. ENGLISH FRANAIS DEUTSCH NEDERLANDS ESPAOL ITALIANO PORTUGUS SVENSKA 32 MACROVISION PRODUCT NOTICE This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF T562 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION INTERLACE OUTPUT. IF THERE ARE QUESTIONS REGARDING YOUR TV SET COMPATIBILITY WITH THIS PRODUCT MODEL T562 DVD PLAYER, PLEASE CONTACT NAD ELECTRONICS INTERNATIONAL CUSTOMER SERVICE, +831 0799. It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, and rent copyrighted material without permission. DVD videodiscs are copy protected, and any recordings made from these discs will be distorted. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. DOLBY LABORATORIES NOTICE This product is manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.

T562 IM english 23/7/02 9:43 am Page 33

Reference NOTES

33 ITALIANO ESPAOL NEDERLANDS DEUTSCH FRANAIS ENGLISH

Page 34

www.NADelectronics.com 2002 NAD ELECTRONICS INTERNATIONAL A DIVISION OF LENBROOK INDUSTRIES LIMITED
All rights reserved. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International

T562 Manual 06/02