(ENTER): Acknowledges menu selection or displays the program list. PR/CH (v/V): Scans up or down through memorized channels. RETURN (O): Removes the on-screen displays. REC(z): Starts recording. Press repeatedly to set the recording time. MARKER: Selects multiple files/titles on the list.
PLAY (N): Starts playback.
c STOP (x): Stops playback or recording. PAUSE/STEP (X): Pause playback or recording temporarily. SCAN (m / M): Search backward or forward. SKIP (. / >): Go to next or previous chapter/track/file.

Page 8

Main Unit

a b c d e f g h i j k

a 1 / I (POWER button) Switches the unit ON or OFF. b Disc Tray Insert a disc here. c DVD Set the recorders mode to DVD. d OPEN/CLOSE (Z) Opens or closes the disc tray. e HDD Set the recorders mode to HDD. f Display window Shows the current status of the unit. T/S: Indicates the timeshift mode. REC: The unit is recording. HDD: The unit is in HDD mode. DVD: The unit is in DVD mode. HDD b B DVD: The unit is dubbing. : Indicates when the unit is in timer recording or a timer recording is programmed. : Indicates clock, total playing time, elapsed time, title number, chapter/track number, channel, etc. g Remote Sensor Point the remote control here.
h N / X (PLAY / PAUSE) Starts playback. Pause playback or recording temporarily, press again to exit pause mode. i x (STOP) Stops playback or recording. j z (REC) Starts recording. Press repeatedly to set the recording time. k RESOLUTION Sets the output resolution for HDMI and COMPONENT OUTPUT jacks. - HDMI: 576i, 576p, 720p, 1080i, 1080p - COMPONENT: 576i, 576p l USB Port Connect an USB Flash memory. m DV IN Connect the DV output of a digital camcorder. n AV IN 3 (VIDEO IN/AUDIO IN (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/ Monitor, VCR, Camcorder, etc.).

Page 9

Hooking up the unit
a Antenna connection Connect the Terrestrial TV antenna to the ANTENNA IN jack on the unit. If you want to use an indoor antenna, use one with a signal amplifier rated at 5V, 100mA and set [Antenna Feed 5V] to [ON] in the setup menu. Antenna (Digital) Antenna (Analog) c SCART connection Connect one end of the scart cable into the AV1 SCART jack on the unit and other end to the corresponding in jack on your TV. You can get Audio and Video signals together with this connection.

and/or

b Antenna connection to your TV Connect one end of the RF cable to ANTENNA OUT jack on the unit and other end to ANTENNA IN jack on your TV. Passes the signal from the ANTENNA IN jack to your TV/monitor.
d Power cord connection Connect the mains lead to the AC IN terminal on the unit. Then plug the power cord into the mains.

Page 10

Digital audio connection

Connecting to an amplifier/receiver, Dolby Digital/MPEG/DTS decoder or other equipment with a digital input. Connect one end of the digital audio cables (COAXIAL or OPTICAL) to the digital audio output jack (COAXIAL or OPTICAL) on the unit and other end to the digital audio input jack (COAXIAL or OPTICAL) on your amplifier.
This recorder does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this recorder to a DTS compatible receiver via one of this recorders digital audio outputs.

Page 12

HDMI connection
Connect one end of the HDMI cable to the HDMI OUTPUT jack on the unit and other end to the HDMI INPUT jack on your TV.
If your TV is not equipped with DTS decoder, set the [DTS] options to [OFF] on the setup menu (See page 19). To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible receiver via one of this units digital audio outputs. If there is noise or lines on the screen, please check the HDMI cable. Changing the resolution when the unit is connected with HDMI connector may result in malfunctions. To solve the problem, turn off the unit and then turn it on again. When you connect an HDMI or DVI compatible device make sure of the followings: - Try switching off the HDMI/DVI device and this unit. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this unit. - The connected devices video input is set correctly for this unit. - The connected device is compatible with 720(1440)x576i, 720x576p, 1280x720p, 1920x1080i or 1920x1080p video input. Not all HDCP-compatible DVI devices will work with this unit. - The picture will not be displayed properly with non-HDCP device.

Recorder

When you use the HDMI connection, you can change the resolution (576i, 576p, 720p,1080i or 1080p) for the HDMI output by pressing RES. button repeatedly.

About HDMI

HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD Players, Set-Top Boxes, and other AV devices. HDMI was developed to provide the technologies of HDCP (High-bandwidth Digital Contents Protection). HDCP is used to protect digital content transmitted and received. HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel surround-sound audio, HDMI features include uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

What is SIMPLINK?

Some functions of this unit are controlled by TVs remote control when this unit and LG TV with SIMPLINK are connected through HDMI connection. Controllable functions by LG TVs remote control; Play, Pause, Scan, Skip, Stop, Power Off, etc. Refer to the TV owners manual for the details of SIMPLINK function. LG TV with SIMPLINK function has the logo as shown above.

1 Turn on the unit: The initial setup wizard appears on the screen. 2 Choose a language: 3 Select the chosen language: 4 Check the antenna and go to the next step: 5 Choose a clock setting mode: 6 Select the chosen clock setting mode: 7 Set the clock: This step is not available for Auto mode 8 Choose a country you are using the unit: 9 Choose a broadcasting type: All or Analog 10 Select the [Start] and starts channel scan: 11 Close the initial setup:
Editing a channel (Analog channel only)
You can change the settings of programmed channel by selecting [Program Edit] option on the left side of the channel editing screen.
Auto setup - more you can do
Adjust the programmed channels
Press HOME, then use b B to select [Easy Menu] option. Press ENTER while [SETUP] is selected. The SETUP menu appears on the screen. Select the [Program Edit] on the second level options then press B to move to the third level. Press ENTER while [Edit] option is selected. The channel editing screen appears on the screen. Select which channel you would like to edit and press ENTER. An option menu on the left side of the screen will be highlighted.
[PR]: Indicates the selected channel position. [Seek]: Searches for a channel automatically. Searching stops when the unit tunes in a channel. [Ch.] Changes the channel number. [MFT] Fine tunes the channel to obtain a clearer picture. [CANAL]: Sets the channels for the decoder. You need this setting to watch or record PAY-TV/Canal plus programs. [NICAM]: Sets the channels for the NICAM broadcast. [OK]: Confirm the settings and return to the channel list menu.

Page 16

Switching the program list on the channel editing screen
You can switch the program list on the channel editing screen.

Using the Home Menu

1 Displays the HOME menu: 2 Select a main option: 3 Select a sub option: 4 Execute the selected option: 5 Exit the HOME menu: HOME

ENTER HOME

Press v V to move the highlight position to top of the program list. Press b B to select [DIGITAL TV], [ANALOG TV] or [RADIO] then press v V to select a program on the list.
Setting a favorite program
You can set a program to favorite channel.
Using the Home Menu - more you can do
HDD Displays the [Title List] menu, which shows recorded titles on HDD. (page 33) HDD DivX Displays [Movie List] menu, which shows DivX movie files on HDD. (page 27) DISC Displays [Title List] menu, which shows recorded titles on the disc. (page 33) Displays [Movie List] menu, which shows DivX movie files on the disc. (page 27) Plays DVD-Video disc (page 25). USB Displays [Movie List] menu, which shows DivX movie files on the USB Flash Drive. (page 27)

Page 20

Adjust the lock settings
Area code Select a code for a geographic area as the playback rating level. This determines which areas standards are used to rate DVDs controlled by the parental lock. See the Area Codes on page 38. DivX Reg. Code We provide you with the DivX VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX VOD service. For more information, visit www.divx.com/vod. Press ENTER when [View] icon is highlighted and you can view the registration code of the unit.
Adjust the recording settings
To access the Lock System, DVD Rating, DTV Rating, Set Password or Area Code options, you must enter the 4-digit password. If you have not yet entered a password you are prompted to do so. Enter a 4-digit password. Enter it again to verify. If you make a mistake while entering number, press CLEAR to delete numbers. If you forget your password, you can reset it. Displays the SETUP menu. Input 210499 and press ENTER. The password has now been cleared. Lock System Allows you to set up specific programs and ratings through blocking schemes. Also allows you to activate or disable all of the lock schemes previously set up. A password is required to gain access to the lock menu options. When the Lock System is set to [OFF], the [DTV Rating] is not effective. DVD Rating Select a DVD rating level. The lower the level, the stricter the rating. Select [No Limit] to deactivate the rating. DTV Rating You can set the ratings to block out all the programs with ratings above a specified level. [No Control]: You can view all programs. [04 Years] [18 Years]: Rating [04 Years] has the most restrictions and [18 Years] is the least restrictive. [Lock All]: All programs are locked. To view a program, you must input the 4-digit password you have created. Set Password Changes or deletes the password. [Change]: Enter the new password twice after entering the current password. [Delete]: Delete the current password after entering the current password.
Record Mode Set Select the picture quality for recording from XP, SP, LP, EP or MLP. See recording time of each mode on page 41. [XP]: Highest picture quality. [SP]: Standard picture quality. [LP]: Slightly lower picture quality than [SP] mode. [EP]: Low picture quality. [MLP]: The longest recording time with the lowest picture quality. Record Aspect This option sets the recording aspect ratio to suit the material you are recording on DVD. DV Record Audio You need to set this if you have a camcorder using 32kHz/12-bit sound connected to the front panel DV IN jack. Some digital camcorders have two stereo tracks for audio. One is recorded at the time of shooting; the other is for overdubbing after shooting. On the Audio 1 setting, the sound that was recorded while shooting is used. On the Audio 2 setting, the overdubbed sound is used.

You can display TV program list using the ENTER button and switch into other TV program on the channel list. While watching a program, press ENTER to display the TV program list. Select your desired channel using the v / V and press ENTER to change the TV program.
Switching the program list
d You can switch the program list to DIGITAL TV, ANALOG TV or RADIO. Press v to move the highlight position to top of the program list. Press b B to select a [DIGITAL TV], [ANALOG TV], or [RADIO]. Selected program list appears.
a Indicates channel number, station name, and audio signal (Stereo, Bilingual, Mono) received by the tuner. (The audio signal indication is available only for the analog channels.) b Indicates media name and format. c Indicates the record mode, free space, and elapsed time progress bar. d Indicates current date and time. e Indicates program title, start time, end time, etc. (Extended Text Message Icon): Indicates that there is an Extended Text Message available to provide detailed descriptions of the program (see page 24). (DTV Subtitle Icon): Indicates that the current program contains the subtitle. (Wide Icon): Indicates that the current program is shown in wide picture format. (Teletext Icon): Indicates that there is a Teletext available (see page 25).
Displaying the favorite program list
You can display favorite channel list that organized by your private taste. To set a favorite program, use [Program Edit] option in the Setup menu. (page 18.)
Press Red colored button while watching a TV. The favorite options appears. Press v V to select a desired program then press ENTER to watch the selected program.

Page 24

Using the digital EPG
1 Displays the EPG menu: 2 Select a TV program: 3 Displays the next/previous menu list: 4 Shows the selected program currently on air: 5 Exit the EPG menu: EPG vV.> ENTER EPG or RETURN

Switching the EPG menu

The EPG screen provides two search menus. Press yellow color button when the EPG menu is displayed. Now/Next: The screen shows now and next programs.
Using the digital EPG - more you can do

About the digital EPG

The digital EPG shows a table of scheduled digital TV programs and detailed information about individual program. The digital EPG screen consist of program information, channel list and general program list. Note that the units clock must be set to the correct time and date to ensure all relevant EPG information is displayed. Please note that EPG function is not currently operating since Greek Digital Broadcasting environment has not activated Digital EPG yet. It will operate as soon as Digital EPG is activated. 8 Days: The screen shows programs within 8 days. When the EPG menu with 8 days is displayed, you can also change the date of the EPG menu by pressing the green color button then use b / B to select a date.

Displaying the detailed Information window
You can view detailed information for the highlighted program. Press blue color button to display detailed information window. To exit the detail information window, press blue color button again.
You can set a timer record using EPG menu with 8 days. Select a program then press red color button. The red timer icon will be displayed and the program will be memorized by the recorder. You can check the programming on the [Timer Record List] menu (see page 31). To cancel the timer recording, select the program then press red color button. The red timer icon disappears.

Page 25

Viewing a Teletext service
Teletext is a free broadcasting service by some TV stations which gives up-to-the-minute information on news, weather, television programs, share prices and many other topics. The recorder gives you access to teletext which is greatly improved in various aspects such as text and graphics. This teletext can be accessed by special teletext services and specific services which broadcast teletext.

Play a disc

1 Open the disc tray: 2 Insert a disc: 3 Close the disc tray: 4 Adjust the disc menu settings: A disc menu may not appears on the screen depending on the disc. 5 Starts playback: 6 Stops playback: Z OPEN/CLOSE (Z) Z OPEN/CLOSE (Z) v V b B, ENTER

N PLAY (N) x STOP (x )

Use numbered (0-9) buttons or PR/CH on the remote control to change the program which broadcast teletext. Press TEXT to access on the teletext. Follow the indications on teletext and move onto the next or previous step by pressing color (RED or GREEN) or SKIP (. / >) buttons. Press (TEXT) or RETURN (O) to turn the teletext off and return to TV viewing.
Play a disc - more you can do
Playing a disc that contains a menu DVD
The menu screen may be displayed first after loading a DVD which contains a menu. Use the b / B / v / V buttons to select the title/chapter you want to view, then press ENTER to start playback. Press TITLE or MENU/LIST to return to the menu screen.

Selecting teletext page

Enter the desired page number as a three digit number with the numbered buttons. If during selection you press a wrong number, you must complete the three digit number and then enter the correct page number again. Use RED/GREEN buttons to move up and down pages.
Skip to the next/previous chapter/track/file
HDD DVD ALL ACD MP3 WMA DivX Press SKIP (>) to move to the next chapter/track/file. Press SKIP (.) to return to the beginning of the current chapter/track/file. Press SKIP (.) twice briefly to step back to the previous chapter/track/file.

Page 26

Pause a playback
Press PAUSE/STEP (X) to pause playback. Press PLAY ( N) to continue playback.
Repeating a specific portion (A-B) HDD
Frame-by-Frame playback HDD
Press REPEAT to select [A-] at the beginning of the portion you wish to repeat and press ENTER at the end of the portion. Your selected portion will be repeated continually. You cannot select a portion less than 3 seconds. To return to normal playback, press REPEAT repeatedly to select [OFF]. Last Scene Memory DVD This unit memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled.
Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback. You can advance or back up the picture frame-by-frame by pressing b / B repeatedly during PAUSE mode.
Fast forward or fast reverse HDD
Press SCAN (m or M) to play fast forward or fast reverse during playback. You can change the various playback speed by pressing SCAN (m or M) repeatedly. Press PLAY ( N) to continue play at normal speed.
Hearing a different audio HDD
Press AUDIO then press b or B repeatedly to hear a different audio language, audio track or encoding method.
Slow down the playing speed HDD
While playback is paused, press SCAN(bb or BB) to slow down forward or reverse playback. You can change the various playback speed by pressing SCAN (m or M) repeatedly. Press PLAY ( N)to continue play at normal speed.
Viewing the Title menu DVD
Press TITLE to displays the title menu or disc menu. If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may appears.

Playing repeatedly HDD

Press REPEAT repeatedly to select an item to be repeated. The current title, chapter, folder or track will be played back repeatedly. To return to normal playback, press REPEAT repeatedly to select [OFF].

Page 27

Playing DivX movie files
1 Displays the HOME menu: 2 Selects a [MOVIE] option: 3 Selects an option that contains DivX file: 4 Selects a movie file from the menu: 5 Plays the selected movie file: 6 Stops the playback: HOME bB v V, ENTER vV PLAY STOP

Copying file(s) or folder(s) to the HDD
You can copy file(s) or folder(s) to the HDD.
Select file(s) or folder(s) you would like to copy then press ENTER. Select [Edit] option then press ENTER to show sub options. The [Copy] menu appears by pressing ENTER while [Copy] option is selected. Select a directory that you would like to copy to. Select the [Copy] option then press ENTER to begin copying.
Moving file(s) or folder(s) to the other folder on the HDD
You can move file(s) or folder(s) to the other folder on the HDD.
Select a file or folder you would like to rename then press ENTER. Select [Edit] option then press ENTER to show sub options. The keyboard menu appears by pressing ENTER while [Rename] option is selected.
Select file(s) or folder(s) you would like to move then press ENTER. Select [Edit] option then press ENTER to show sub options. The [Move] menu appears by pressing ENTER while [Move] option is selected. Select a directory that you would like to move to. Select the [Move] option then press ENTER to begin moving.

Page 29

Listening to a music
1 Displays the HOME menu: 2 Select a [MUSIC] option: 3 Selects an option that contains music: 4 Selects a music from the menu: 5 Plays the selected music: 6 Stops the playback: HOME bB v V, ENTER vV PLAY STOP
Displaying MP3/WMA file information
Press DISPLAY while the file you want to show the file information is selected. The unit shows the ID3-Tag information of the file. If the file does not have ID3-Tag information, [ID3-Tag: None] appears on the screen.
MP3/WMA audio file requirement
File extensions:.mp3,.wma. Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA) Bit rate: within 8 - 320kbps (MP3), within 32 - 192kbps (WMA) CD-R Format: ISO 9660 and JOLIET. DVDR/RW Format: ISO 9660 (UDF Bridge format) Maximum Files/Disc: Less than 1999 (total number of files and folders)
Listening to a music - more you can do

Music List menu options

Select which file/track you would like to show from the menu and press ENTER. A menu appears on the left side of the screen.
Creating your own program
You can play the contents in the order you want by arranging the order of the musics. The program is cleared when exit the [Music List] screen. To add or erase a music(s) on the program list, press MENU/LIST to display the [Program List]. Select a desired music from the [Music List] then press ENTER. If you want to select multiple files/tracks, press MARKER at the every desired files/tracks. Select the [Program Add] option then press ENTER to add the selected files/tracks to the [Program List]. Select a music from the [Program List] then press PLAY to start programmed playback. You can change the playing order using [Move] option on the program list menu.

Audio CD

MP3/WMA
Erasing tracks/files from Program List
To delete a music from the program list, select the music you want to delete then press ENTER. An option menu appear on the left side of the screen. Select the [Delete] option then press ENTER to erase the music from the list.
[Play]: Starts playback the selected file/track. [Random]: Starts or stops random playback. [Open]: Opens the folder and a list of files in the folder appears. [Delete]: Deletes the file(s) or folder(s) from the hard disk drive. [Rename]: Edits the file name in the HDD. [Move]: Moves selected file(s) to another folder in the HDD. [Copy]: Copies a file(s) to another folder in the HDD. [Program Add]: Adds a file(s)/track(s) to [Program List]. [Save]: Saves a [Program List] that you have arranged in the HDD. [Load]: Loads a saved [Program List] in the HDD.
Save your Program List (HDD only)
This unit memorizes the [Program List] that you have programmed. Select a file on the [Program List] then press ENTER. Select the [Save] option then press ENTER to save the [Program List].

Page 30

Viewing a photo
1 Displays the HOME menu: 2 Selects a [PHOTO] option: 3 Selects an option that contains photo file: 4 Selects a photo from the list: 5 Displays the selected photo in full screen: 6 Returns to the Photo List: HOME bB v V, ENTER vVbB PLAY STOP

Rotate a photo

Use vV to rotate the photo while displayed in full screen.
Viewing photo files as a slide show
To slide show photos in the [Photo list], select the [Slide Show] option on the left side of the screen then press ENTER, The [Slide Show] menu appears on the screen. Set the [Object] and [Speed] options then press ENTER while [Start] option is selected. The unit starts slide show as you set on the menu. [Object] option: [Selected] Views slide show only selected files. Use the MARKER button to select multiple files. [All] Views slide show all files. [Speed] option: Sets the Slide Show speed to [Slow], [Normal], or [Fast].
Viewing a photo - more you can do

Photo List menu options

Select which file you would like to show from the menu and press ENTER. A menu appears on the left side of the screen.
Listening to music during slide show
You can slide show photo files while listening to MP3/WMA music files on HDD. Press ENTER while [Simultaneous Music play] option is selected on the [Slide Show] menu. The music file selection menu appears on the screen. Press MARKER at the desired files to play then press ENTER while [Start] option is selected. The unit starts slide show with music playing. [Select All]: Select all files in current directory. [Deselect All]: Deselect all files.

Sorting the titles HDD

Press ENTER to bring up the options menu. Select [Sort] option and press ENTER to view the further options. Here you can choose to sort titles according to [Date] (when they were recorded), [Title] (alphabetical order) or by [Category] (sort by genre).

Deleting a part HDD

You can delete a part which you do not want in the title. Select a title that you want to delete part and press ENTER. Select [Delete Part] in the [Edit] option from the menu on the left of the screen and press ENTER to display the [Delete part] menu. You can find the point using PLAY, SCAN, PAUSE/STEP buttons. [Start Point]: Select starting point of a part that you want to delete then press ENTER. [End Point]: Select ending point of a part that you want to delete then press ENTER. [Next Part]: Press ENTER to delete a additional part (HDD only). [Cancel]: Press ENTER to cancel the selected part. [Done]: Press ENTER to delete the selected part.

Combining titles HDD

Use this function to merge the selected title with another title. Select a title and press ENTER. Select [Combine] in the [Edit] option then press ENTER. Select a title you want to combine with current title and press ENTER to confirm.
Hiding a chapter or title +RW
You can skip through playing chapters or titles without actually deleting them. Select a chapter or title you want to hide and press ENTER. Select [Hide] in the [Edit] option then press ENTER. If you want to recover the hidden title or chapter, select the hidden title or chapter and press ENTER. Select [Show] in the [Edit] option then press ENTER to recover it.

Page 36

Naming a title
When a title is recorded by this unit, the title name will be named by a number. You can change a title name by using this function.
The chapters that you want to combine are created by deleting a part from an Original title. The chapters that you want to combine are created from different titles. One of the playlist chapter that you want to combine has been moved.

Using the Disc menu

Using the title list menu in DVD mode, you can use the disc setting functions without entering the SETUP menu.
Select a title that you want to change a name and press ENTER. Select [Rename] or [Title Name] option from the menu on the left of the screen and press ENTER to display the keyboard menu. Use v V b B to select a character then press ENTER to confirm your selection on the keyboard menu. [OK]: Finish the naming. [Cancel]: Cancels all entered characters. [Space]: Inserts a space at the cursor position. [Delete]: Deletes the previous character at the cursor position. You can use remote control buttons for entering a name PLAY (N): Inserts a space at the cursor position. X (PAUSE/STEP): Deletes the after character at the cursor position. x (STOP), CLEAR: Deletes the previous character at the cursor position. / >: Moves cursor to left or right. MENU/LIST, DISPLAY: Changes the character set on the keyboard menu. Numbers (0-9): Enters the corresponding character at the cursor position. You can apply a genre for a selected title on HDD. When a character is highlighted on the keyboard menu, keep pressing b until the curser jumps across to the Genre field. Choose desired genre and press ENTER to select it. The chosen genre name will appear at the lower right corner of the title thumbnail. Use v V b B to select the [Disc] option on the DVD title list menu and then press ENTER to show further options. [Disc Format]: Format the inserted disc. (page 21) [Finalize]: Finalize the inserted disc. (page 21) [Unfinalize]: Unfinalize the inserted disc. (page 21) [Disc Label]: Use this to enter a name for the disc. This name appears when you load the disc and disc information on-screen. (page 21) [Protect]: Use this to prevent accidental recording, editing, deleting of the inserted disc. (page 21) [Unprotect]: Release the protect function.

Use the copying features of this recorder to: Back up important recordings stored on the HDD to a DVD. Make a DVD copy of a recording on the HDD to play in another player. Transfer video from a DVD to the HDD for editing. Transfer edited video from the HDD to DVD.
This feature copies a single title to the HDD in real time. When you start copying, playback jumps back to the start of the title, then continues through to the end of the title, when recording automatically stops. The copy will be made in the recording mode (XP, SP, LP, EP or MLP) that is currently set in the SETUP menu. During DVD playback, press HOME to display the HOME menu. Select the [Dubbing] in the [Easy Menu] option, and press ENTER to start dubbing. The [Dubbing] option in the HOME menu will activated only for a title from finalized DVDR or DVD-ROM title without copy protection.

Page 38

Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language Afar Afrikaans Albanian Ameharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali; Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian Chinese Code 9072 Language Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Code 7185 Language Hausa Hebrew Hindi Hungarian Icelandic Indonesian Interlingua Irish Italian Javanese Kannada Kashmiri Kazakh Kirghiz Korean Kurdish Laothian Latin Latvian, Lettish Code 7686 Language Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Oriya Panjabi Pashto, Pushto Persian Polish Portuguese Code 8084 Language Quechua Rhaeto-Romance Rumanian Russian Samoan Sanskrit Scots Gaelic Serbian Serbo-Croatian Shona Sindhi Singhalese Slovak Slovenian Spanish Sudanese Swahili Swedish Tagalog Code 8476 Language Tajik Tamil Telugu Thai Tonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapk Welsh Wolof Xhosa Yiddish Yoruba Zulu Code 9085

There is no picture. b Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen.

b b b b

b Connect the video connection securely. b Check the [Video Output Format] in SETUP menu is set to the appropriate item that conforms to your video connection. Picture noise appears. b You are playing a disc recorded in a color system that is different form your TV.
b The video signal from the external component is copy-protected. b Set the resolution that your TV can accepts.
The channel is not found or stored. b Check your antenna connection. There is no sound. b Connect the audio connection securely. b The input source setting on the amplifier or the connection to the amplifier is incorrect.
b The unit is in scan, slow motion, or pause mode.
The remote control does not work properly.
b The resolution is higher than the unit can support.
The remote control is not pointed at the remote sensor of the unit. The remote control is too far from the unit. There is an obstacle in the path of the remote control and the unit. The batteries in the remote control are exhausted.

Page 40

Cannot record or does not record successfully. b Check the remaining space on the disc. b Check that the source you are trying to record in not copy protected. b The power may have failed during recording. b Use a VR mode formatted disc for copy-once material.
b If your TV is not equipped with DTS decoder, set the [DTS] options to
[OFF] on the setup menu. To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible receiver via one of this units digital audio outputs.

Resetting the unit

If you observe any of the following symptoms. The unit is plugged in, but the power will not turn on or off. The front panel display is not working. The unit is not operating normally. You can reset the unit as follows. Press and hold the POWER button for at least five seconds. This will force the unit to power off then turn the unit back on. Unplug the power cord, wait at least five seconds, and then plug it in again.
Timer record does not record successfully. b Clock is not set to correct time. b The start time of the timer recording is past. b Two timer recordings may have overlapped, in which case only the earlier one will record completely.
b When setting the recording channel, make sure you set the units built-in
tuner, not the TVs built-in tuner. Stereo Audio Record and/or Playback is not present. b TV is not Stereo-compatible. b Broadcast program is not in stereo format. b The A/V Output jacks on the unit are not connected to TV A/V In jacks.