EC140B/EC210B/EC240B EC290B/EC360B/EC460B

OPTIONAL EQUIPMENT

PRODUCT MANUAL

Foreword

Optional Equipment for Volvo Excavators
Alternative equipment (see spec. sheet for relevant machine) Volvo excavators are extremely versatile when it comes to extra equipment which makes it possible for each dealers to customize his own machine. A wide assortment of booms, dipper arms, hydraulics and safety options are available to choose from. By choosing the right combination of boom, dipper arm and bucket you can get a machine with exactly the characteristics you want. With this system of selectable combinations, the new Volvo models offer a wide choice of optional equipment to suit most working conditions. Built-in flexibility The machines are prepared from the start for a number of options. Three extra hydraulic circuits are available. The booms and dipper arms are prepared with welded brackets for extra hydraulic piping, to eliminate the need for welding work during retrofitting.
Optional equipment A large number of options are available to further enhance the versatility and comfort of your Volvo excavator, as well as to facilitate service and maintenance. Some of the options in the brochure may be standard or required by law on certain markets. Please refer to the specification brochure for more information on the machine in question.
This brochure This brochure lists the options that can be retrofitted on Volvo excavators: EC140B, EC210B, EC240B, EC290B, EC360B, and EC460B. Several options are only available as factory installations. For your reference, these are included in the manual. Please note that some options are not available for specific markets.
Contact Volvo Construction Equipment Korea for more information.
Volvo Excavators, General

Excavators, general

1. Superstructure _ engine _ slew ring _ slew reduction unit _ hydraulic tank _ fuel tank _ radiator and hydraulic oil cooler _ working hydraulics 2. Counterweight 3. Cab 4. Undercarriage _ travel reduction units _ travel motor _ track frame with tracks 5. Boom _ a large number of different booms are available in different versions and different lengths, for example: monoblock boom/2-piece boom/ long reach boom/ME boom 6. Boom cylinder 7. Arm _ a large number of different dipper arms are available in different versions and different lengths, for example: short/standard/long arm long reach arm 8. Arm cylinder 9. Volvo quick fit 10. Bucket 11. Bucket cylinder

Contents

EC140B EC210B Engine equipment Alternator Block heater Oil bath pre-cleaner Diesel coolant heater Electric equipment Extra work lamps Travel alarm Rotating beacon Cab equipment Operator seat Wrist control joystick Front rain shield Lower wiper Sunlight protection (steel) Protection equipment FOG FOPS Anti-vandal kit Safety net, front window Exterior equipment Service walkway EC240B EC290B EC360B EC460B Page
: Available as a retrofit kit and a factory installation : Available as a retrofit kit only : Factory installation only : Not available
EC140B EC210B Undercarriage equipment Track shoe Heavy duty full track guard Foot step for lower frame Skid rail Retractable track gauge Dozer blade (LC only) Digging equipment Booms and arms Long reach full kit Hydraulic equipment Oil leak (drain) line Hydraulic oil Grapple maneuver Bracket kit for hydraulic piping Hydraulic equipment for hammer, shear, etc Hydraulic equipment for rotator and slope bucket Hydraulic equipment for quick fit Hydraulic equipment for hose rupture valves on arm Other equipment Removable counterweight Quick fit Full scale tool kit : Available as a retrofit kit and a factory installation : Available as a retrofit kit only : Factory installation only : Not available
EC240B EC290B EC360B EC460B

Engine equipment

Alternator A high capacity alternator is available for applications when many electrical devices have been installed, such as extra lights. Alternator 80 A does suit the electrical system load with extra work lamps for machines that work around the clock.

Description Alternator 80 A

EC140B

EC210B

EC240B

EC290B

EC360B

EC460B
: Standard for those models
Block heater The coolant heater (engine block) are additional engine starting aids to the air heater during severe cold weather. The heaters are designed for an external power supply of 240 V AC. Recommended ambient temperature to install: below -20C
Description Block heater, 240 V

EC140B 8277478

EC210B 8277478

EC240B 8277478

EC290B 8277478

EC360B 8277302

EC460B 8277124
Oil bath pre-cleaner The oil bath pre-cleaner is recommended for machines that work in dusty and humid environments. In combination with the standard air cleaner, the oil bath pre-cleaner provides extra protection against engine damage.
Description Oil bath air cleaner

EC140B _

EC210B _

EC240B _

EC290B _

EC360B 8277310

EC460B 8277133
Diesel coolant heater The diesel coolant heater facilitates starting at low temperature (and warming up the cab at the same time) where the electric source is not available. The heating time can be adjusted and the preset heating time can be seleted daily or weekly.
Description Diesel coolant heater

EC140B 8278081

EC210B 8277484

EC240B 8277484

EC290B 8277484

EC360B 8277311

EC460B 8277134
*Should be combined with the heater in the cab.

Electric equipment

Extra work lamps For the front direction, two lamps are mounted on top of the cab. For the rear direction, one lamp is mounted on the cab and the other is mounted on the counterweight. The 80 A alternator is recommended with this option.
Description Extra work lamp

EC140B 8277799

EC210B 8277799

EC240B 8277485

EC290B 8277485

EC360B 8277136

EC460B 8277136
Travel alarm The travel alarm is a safety device that sounds when the machine travels forward or reverse, to warn by standards of impending danger. There is a shut-off switch for long distance travel. In certain markets, a travel alarm is a legal requirement on excavators.

Description Travel alarm

EC140B 8277715

EC210B 8277715

EC240B 8277715

EC290B 8277486

EC360B 8277312

EC460B 8277137

Rotating beacon The rotating beacon is a safety device which is mounted on the cab roof. For transport, it can be easily tilted. There is a switch in the cab to turn the beacon on or off. In certain markets, a rotating beacon is a legal requirement on excavators.
Description Rotating beacon

EC140B 8277138

EC210B 8277138

EC240B 8277138

EC290B 8277138

EC360B 8277138

EC460B 8277138

Cab equipment

Operator seat For the operators comfort, various seat options are available. _ Standard seat _ Standard seat with heater _ Standard seat with heater and air suspension
Description Standard seat with heater & air suspension

EC140B 8277145

EC210B 8277145

EC240B 8277145

EC290B 8277145

EC360B 8277145

EC460B 8277145
* The other options are available as factory installations.
Wrist control joysticks Low-effort, wrist control joysticks are provided for smooth and precise control. A semi-long joystick and a five button joystick are available depending on the attachment application or operators preference. * The other options are available as factory installations
Front rain shield An exterior front rain shield is recommended for the operators comfort. The front rain shield prevents rain from falling on the operators feet when the front window is open. All mounting holes are already installed in the cab. Front rain shield is standard on all machines.
Lower wiper An extra wiper for the lower front window is available to further enhance the lower visibility.

Description Lower wiper

EC140B 8277790

EC210B 8277790

EC240B 8277790

EC290B 8277790

EC360B 8277316

EC460B 8277161

Sunlight protection (steel) A sun shield cover on the roof reduces incoming light and heat radiation.
Description Sunlight protection

EC140B 8278103

EC210B 8278103

EC240B 8278103

EC290B 8278103

EC360B 8278103

EC460B 8278103

Protection equipment

FOG The FOG (Falling Object Guard) is recommended for tough working site applications, such as quarries and demolition. The cab mounted FOG is approved according to ISO 10262 and consists of FOPS and the front guard. The front guard is tiltable and supported by a gas strut for easy access to front window. This installation does not require welding on the superstructure.

Description FOG

EC140B 8277920

EC210B 8277920

EC240B 8277920

EC290B 8277920

EC360B 8277920

EC460B 8277920

Restrictions: Not available with FOPS, safety net, or anti-vandal kit installed on the front window.
FOPS A cab mounted FOPS, (Falling Object Protection Structure), is available for the protection of the operator. The FOPS is approved according to ISO 3449 and is easy to install. The protection structure is bolted to the cab top. All mounting holes are already installed in the cab.

Description FOPS

EC140B 8277164

EC210B 8277164

EC240B 8277164

EC290B 8277164

EC360B 8277164

EC460B 8277164

Restrictions: Not available with FOG
Anti-vandal kit To prevent broken cab windows, the machine can be equipped with anti-vandal protection. The equipment consists of 7 pieces of ABS glass fiber plate, a locking key and a storage box. The storage area can be either located between the tool box and boom foot or on the cab roof (EC140B and EC210B cab roof only).
Description Anti-vandal kit

EC140B 8277803

EC210B 8277803

EC240B 8277165

EC290B 8277165

EC360B 8277165

EC460B 8277165
Restrictions: _ Not available with FOG or safety net installed on the front window. _ Can be installed on the anti-vandal cab only. The mounting hooks for the vandal kit are already installed on the anti-vandal cab.
Safety net, front window For protection of the front windshield and operator during operation with a hammer or crusher, a safety screen is available. The net size is 42 mm x 42 mm. It can be tilted, and is support by a gas strut for easy access to front window. All mounting holes are already installed in the cab.

Description

EC140 B

EC210 B

EC240 B

EC290 B

EC360 B 8277166

EC460 B 8277166

Safety net, front window Restrictions: _ Not available with FOG or anti-vandal kit installed on the front window. 12

Exterior equipment

Service walkway A service walkway is available for the lefthand, cab side of the EC360B and EC460B. This service walkway provides improved serviceability and maintenance access to components on that side of the machine. The service walkway consists of steel grates which are 300 mm wide and are mounted to the left side of the upper frame.
Description Service walkway

EC360B 8277328

EC460B 8277171
* Not available with step for cab entrance

Undercarriage equipment

Track shoe Many different track shoe options are available according to the job site requirements.
Shoe plate kit Description 500 mm triple grouser shoe LC x (XX) 600 mm triple grouser shoe LC x (XX) 700 mm triple grouser shoe LC x (XX) 750 mm triple grouser shoe LC x (XX) 800 mm triple grouser shoe LC x (XX) 900 mm triple grouser shoe LC x (XX) 600 mm triple grouser shoe LCM or NLC x (XX) 700 mm triple grouser shoe LCM or NLC x (XX) 800 mm triple grouser shoe LCM or NLC x (XX) 900 mm triple grouser shoe LCM or NLC x (XX) 600 mm double grouser shoe LC x (XX) 600 mm double grouser shoe NLC x (XX) 700 mm double grouser shoe LC x (XX) * XX: The number of shoe plate 14 EC140B 8278229 (46) 8278236 (46) 8278243 (46) 8278372 (46) _ _ 8278260 (42) 8278265 (42) 8278270 (42) 8278275 (42) _ _ _ EC210B _ 8278235 (49) 8278242 (49) _ 8278249 (49) 8278255 (49) 8278259 (46) 8278264 (46) 8278269 (46) 8278274 (46) _ _ 8278279 (49) EC240B _ 8278234 (51) 8278241 (51) _ 8278248 (51) 8278254 (51) 8278258 (49) 8278242 (49) 8278249 (49) 8278255 (49) _ _ 8278280 (51) EC290B _ 8278233 (50) 8278240 (50) _ 8278247 (50) 8278253 (50) 8278257 (48) 8278262 (48) 8278267 (48) 8278272 (48) _ _ 8278281 (50) EC360B _ 8278231 (50) 8278238 (50) _ 8278245 (50) 8278251 (50) 8278256 (48) 8278261 (48) 8278266 (48) 8278271 (48) 8278277 (50) 8278278 (48) _ EC460B _ 8278230 (52) 8278237 (52) _ 8278244 (52) 8278250 (52) _ _ _ _ 8278276 (52) _ _
Heavy duty full track guard Heavy duty full track guard for the undercarriage of EC210B, EC240B, EC290B, EC360B and EC460B are available for hard conditions.
Description Heavy duty full guard Heavy duty full guard for NLC

EC140B _ _

EC210B 8277648 _

EC240B 8277647 8277648

EC290B 8277518 8277519

EC360B 8277399 8277725

EC460B 8277178 _
Foot step for lower frame For easy access and safety, foot steps are recommended according to the shoe widths.
Description 500, 600 mm shoe 600 mm shoe 700 mm shoe 600, 700 mm shoe 750 mm shoe 800 mm shoe 900, 910 mm shoe 600 mm shoe, 2 step 700 mm shoe, 2 step 800 mm shoe, 2 step 900 mm shoe, 2 step

EC140B 8277727 _ 8277759 _ _ _ _

EC210B _ _ _ _ _ _ _

EC240B _ _ _ _ _ _ _
EC290B _ _ _ 8277583 _ _ _ _ _
EC360B _ _ _ 8277583 _ _ _ _ _
EC460B _ _ _ 8277583 _ 8277762 8277763
Skid rail Depending on the job site conditions, the top rollers can be replaced with a skid rail. Skid rails are available on the EC140B, EC210B, EC240B and EC290B.
Description Skid rail *Available as option kit only

EC140B 8278504

EC210B 8278503

EC240B 8278502

EC290B 8278501

EC360B _

EC460B _
Retractable track gauge For EC460B, the retractable track gauge is available for easy transportation. Special tool for high torque tightening and loosening the bolts is included in this kit. _ Track gauge, retracted (for transportation): mm _ Track gauge, extracted (for working): mm
* Available as factory installation.
Dozer blade (LC only) Front dozer blade is available for EC140B LC to increase versatility in jobs such as dozing, backfilling trenches and speedy site clean-up. _ Blade width: mm _ Blade height: 600 mm * Available as factory installation.

Digging equipment

Booms and arms The best combination of booms and arms should be selected according to the job site requirements. - Short boom and short arm combinations for mass excavation (ME). - Standard boom with short arm combinations for general purpose or narrow job sites. - Standard boom with standard arm combinations for general purpose or narrow job sites. - Heavy duty boom with heavy duty arm combinations for severe job site conditions, such as forestry. - Standard boom with long arm combinations for general purpose or reach work. Boom Description GP boom ME boom 2-piece boom EC140B 8277953 (4,6 m) _ 8277954 (4,6 m) EC210B 8277825 (5,7 m) _ 8177828 (5,57 m) EC240B 8277655 (6,0 m) _ 8277657 (5,95 m) EC290B 8277525 (6,2 m) _ _ EC360B 8277343 (6,45 m) 8277344 (6,2 m) _ EC460B 8277184 (7,0 m) 8277185 (6,5 m) _
Dipper arm Description Short arm Standard arm Long arm Long arm EC140B 8277956 (2,1 m) 8277957 (2,5 m) 8277958 (3,0 m) _ EC210B 8277830 (2,5 m) 8277831 (2,9 m) 8277833 (3,9 m) _ EC240B 8277660 (2,5 m) 8277661 (2,97 m) 8277663 (3,6 m) _ EC290B 8277529 (2,55 m) 8277530 (3,05 m) 8277532 (4,0 m) _ EC360B 8277345 (2,6 m) _ 8277347 (3,9 m) _ EC460B 8277187 (2,55 m) 8277188 (3,35 m) 8277190 (3,9 m) 8277191 (4,8 m)
Long reach full kit A long reach application kit includes a super long boom, super long arm, arm cylinder, bucket linkage, bucket cylinder and a heavier counterweight. Description Long reach kit EC140B _ EC210B 8278364 EC240B 8278363 EC290B 8278362 EC360B _ EC460B _

Hydraulic equipment

Various hydraulic equipment options can be ordered, even for different boom and arm combinations. These options can be ordered as kits. For option kit orders, selection of the option according to the boom and arm type is necessary due to their different lengths and shapes.
Oil leak (drain) line For special functions and components that require drainage of oil, an oil leak line is available (example-case drain line on a hydraulic motor for a rotator).
Description Oil leak (drain) line on base machine
*: Standard for those models
Hydraulic oil The proper hydraulic oil is necessary to meet different climates or environmental conditions. The recommended hydraulic oil (according to climate, conditions or use of tropical kits) is: * Biodegradable hydraulic oil (Panolin) of ISO VG 32 and 46 is also available. * Factory installation only.
Grapple maneuver For the application of the grapple or grab, just changing the bucket cylinder flow by the 3-way valve attached on the bucket cylinder is enough. The grapple or grab is then controlled by the right hand joystick (bucket function).
With grapple maneuver Description Short arm piping with grapple maneuver ME arm piping with grapple maneuver Standard arm piping with grapple maneuver Long arm piping with grapple maneuver EC140B 8277973 (2,1 m) _ 8277974 (2,5 m) 8277975 (3,0 m) EC210B 8277849 (2,5 m) _ 8277850 (2,9 m) 8277851 (3,9 m) EC240B 8277619 (2,5 m) _ 8277620 (2,97 m) 8277621 (3,6 m) EC290B 8277496 (2,55 m) _ 8277497 (3,05 m) 8277498 (4,0 m) EC360B 8277322 (2,6 m) 8278218 (2,6 m) 8277323 (3,2 m) 8277324 (3,9 m) EC460B 8277206 (2,55 m) 8278217 (2,55 m) 8277207 (3,35 m) 8277208 (3,9 m)
Bracket kit for hydraulic piping When ordering some optional hydraulic equipments as a retrofit kit, the piping brackets need to be ordered at the same time to fix or clamp their hydraulic hoses.
Description Bracket for X3, quick fit, hose rupture * Available as option kit only

EC140B 8278025

EC290B 8277580

EC360B 8277392

Hydraulic equipment for hammer, shear, etc. The advantage of this option is to provide Volvo Excavators with the versatility and flexibility required on a variety of different job site conditions. With this option, called hydraulic X1 piping, one way function for Hammer and double acting function for Shear or Crusher, are available. There are many additional sub-options for the X1 piping, such as, a two pump flow option for large size attachments that require high oil flow. An additional hydraulic oil filter to reduce the oil contamination caused by hammer operation. In addition, to provide more versatility, the tilting or
rotator function and a proportional pedal control can be handled by the X1 function by just installing the extra piping on the end of the X1 piping. For hammer control, both the joystick switch button and pedal can be used. The pedal, which is used for double acting movements provides the best comfort for the operator. The proper function is selected by the locking knob on the pedal. There is a kit for the simple installation of two main pumps to increase flow. Through flow control rotary switch, supplied with the X1 piping, the pump hydraulic oil flow is easily adjusted.
Shut off valves for Hammer/Shear Rotator/tilting piping Dimension: PT 3/8
Description X1 piping on base, with one pump flow X1 piping on base, with two pump flow X1 return filter X1 piping on GP boom X1 piping on ME boom X1 piping on 2-piece boom X1 piping on short arm X1 piping on standard arm X1 piping on long arm Extra pipe for slope/rotator on X1 Extra pipe for slope/rotator on X1
EC140B (4,6 m) _ (2,1 m) 8277987 (2,5 m) 8277988 (3,0 m) 8277989 _
EC210B (5,7 m) _ (2,5 m) 8277861 (2,9 m) 8277862 (3,9 m) 8277863 _
EC240B (6,0 m) _ (2,5 m) 8277685 (2,97 m) 8277686 (3,6 m) 8277687 _
EC290B (6,2 m) _ _ 8277550 (2,55 m) 8277551 (3,05 m) 8277552 (4,0 m) 8277553 _
EC360B (6,45 m) 8278220 (6,2 m) _ 8277365 (2,6 m) 8277366 (3,2 m) 8277367 (3,9 m) 8277368 _
EC460B (7,0 m) 8278219 (6,5 m) _ 8277217 (2,55 m) 8277218 (3,35 m) 8277219 (3,9 m) 8277220 (3,35/3,9 m) 8277221 (2,55 m)
X1 modification kit Description From 1 pump to 2 pump EC140B 8278296 EC210B 8278295 EC240B 8278294 EC290B 8278293 EC360B 8278292 EC460B 8278291
Hydraulic equipment for rotator and slope bucket An additional engine driven gear pump and extra valve block are available for rotator or slope bucket. This option is called X3 piping. For the control of X3 piping, the joysticks with either 3 or 5 buttons should be selected (because this option uses electric solenoid valves). _ Available pressure: 150 kg/cm2 _ Available oil flow: 40 l/min

Dimension: PT3/8

Description X3 piping on base machine X3 piping on GP boom X3 piping on ME boom X3 piping on 2-piece boom X3 piping on short arm X3 piping on standard arm X3 piping on long arm

EC140B (4,6 m) _ (2,1 m) 8277996 (2,5 m) 8277997 (3,0 m)
EC210B (5,7 m) _ (2,5 m) 8277868 (2,9 m) 8277869 (3,9 m)
EC240B (6,0 m) _ (2,5 m) 8277677 (2,97 m) 8277678 (3,6 m)
EC290B (6,2 m) _ _ 8277543 (2,55 m) 8277544 (3,05 m) 8277545 (4,0 m)
EC360B (6,45 m) 8278222 (6,2 m) _ 8277358 (2,6 m) 8277359 (3,2 m) 8277360 (3,9 m)
EC460B 8278297*(STD) 8278298*(TRP) 8277224 (7,0 m) 8278221 (6,5 m) _ 8277225 (2,55 m) 8277226 (3,35 m) 8277227 (3,9 m)
* Note: The hydraulic pump for X3 system is different from standard to tropical cooling system.
Hydraulic equipment for Quick fit This equipment makes it possible to operate a quick fit easily. The hydraulic quick fit is operated by two locker switches on the panel. The equipment includes valve block with solenoid valve, switches and control lines from the base machine to the end of arm. Pilot pressure is activated continuously for the closing function. For the opening function, the pilot pressure and working pressure are activated.
Description Quick fit pipe on base machine Quick fit piping on GP boom Quick fit piping on ME boom Quick fit piping on 2-piece boom Quick fit piping on short arm Quick fit piping on standard arm Quick fit piping on long arm
EC140B (4,6 m) _ (2,1 m) 8278003 (2,5 m) 8278004 (3,0 m)
EC210B (5,7 m) _ (2,5 m) 8277874 (2,9 m) 8277875 (3,9 m)
EC240B (6,0 m) _ (2,5 m) 8277692 (2,97 m) 8277693 (3,6 m)
EC290B (6,2 m) _ _ 8277556 (2,55 m) 8277557 (3,05 m) 8277558 (4,0 m)
EC360B (6,45 m) 8278224 (6,2 m) _ 8277371 (2,6 m) 8277372 (3,2 m) 8277373 (3,9 m)
EC460B (7,0 m) 8278223 (6,5 m) _ 8277230 (2,55 m) 8277231 (3,35 m) 8277232 (3,9 m)
Hydraulic equipment for hose rupture valves on arm Hose rupture protection valves are available for the boom and arm cylinders to prevent the attachment from falling due to hose failures. These hose rupture valves satisfy legal requirements in certain markets.
With hose rupture valve Description Hose rupture valve on GP boom Hose rupture valve on ME boom Hose rupture valve on 2-piece boom EC140B 8278008 (4,6 m) _ 8278010 EC210B 8277878 (5,7 m) _ 8277880 EC240B 8277697 (6,0 m) _ 8277698 EC290B 8277562 (6,2 m) _ _ EC360B 8277376 (6,45 m) 8277378 (6,2 m) _ EC460B 8277236 (7,0 m) 8277238 (6,5 m) _
Modification kit for hose rupture valve Adding the hose rupture valve and piping to an existing standard piping. Description On GP boom On ME boom EC140B 8278310 (4,6 m) _ EC210B 8278309 (5,7 m) _ EC240B 8278308 (6,0 m) _ EC290B 8278307 (6,2 m) _ EC360B 8278306 (6,45 m) 8278312 (6,2 m) EC460B 8278306 (7,0 m) 8278311 (6,5 m)

Other equipment

Removable ounterweight For EC360B and EC460B, the removable counterweight makes it easier to remove or install the counterweight by utilizing a hydraulic cylinder and linkage system.

Description Removable counterweight * Available as factory installation.

EC360B 8277336

EC460B 8277243
Quick fit The Volvo hydraulic quick fit makes it possible to change attachments quickly and easily without the operator having to leave the cab. This increases productivity and makes the machine more versatile. To change attachments, two switches have to be activated simultaneously. This minimizes (for safety reasons) the risk of the bucket being released inadvertently during work or travel. The quick fit is equipped with a safety hook. The advantage of this is the bucket can easily be removed. This increases visibility and lifting capacity. The Volvo quick fit has a low weight and low building height which provides higher breakout forces.
Description Quick fit S6 Quick fit S1 Quick fit S2 Quick fit S2 narrow Quick fit S3

EC140B 8278014 _ _ _ _

EC210B _ 8277885 _ _ _

EC240B _ 8277701 _

EC290B _ _ 8277564 _ _

EC360B _ _ _ _ 8277380

EC460B _ _ _ _ 8277255
Full scale tool kit The full scale tool kit includes a toolbox, end wrenches, adjustable wrenches, sockets, ratchet and hammer.

Description Full scale

EC140B 8278028

EC210B 8277588

EC240B 8277588

EC290B 8277460

EC360B 8277258

EC460B 8277258

All products are not available in all markets. Under our policy of continuous improvement, we reserve the right to change specifications and designs without prior notice. The illustrations do not necessarily show the standard version of the machine.

Construction Equipment

Ref. Printed in Korea 2002.02-1 Volvo, Seoul

English, global KOR

EC360/EC460

DEMOLITION

VOLVO EXCAVATORS
Engine power, gross: EC360: 198 kW (265 hp) EC460: 239 kW (321 hp) Operating weight: Demolition equipment EC360: 44.2 t* EC460: 54,9 t* Backhoe equipment EC360: 42.5 42.9 t EC460: 52,1 52,9 t *excluding attachment Attachment weight: EC360/EC460: 2500 kg Pin height, max. EC360: 20 m EC460: 26 m
Low-emission, turbocharged Cummins Diesel engine with direct injection Integrated mode selection system and electronically controlled system (ACS) 2 variable displacement axial piston pumps. Independent and simultaneous movements of the digging equipment are controlled by the Automatic sensing work mode
Cab Ergonomic environment Low sound level Filtered air Hydraulic dampening mounts Specially developed for use in demolition Long undercarriage for good stability Auxiliary hydraulic valve as standard Prepared for a number of optional items

SPECIFICATIONS

Description Operating weight excluding attachment Standard bucket capacity: SAE / CECE Pin height max. Forward reach max Demolition Attachment weight max Model Type Flywheel horsepower: Net Engine Gross Max. torque Fuel tank capacity Type System pressure Hydraulic System (attachment) Max. flow rate Swing speed Travel speed (1st/2nd) Performance Gradeability Max. tractive effort Counterweight EC360 42.5 t 44.2 t 1610 l / 1400 l 20 m 11 m 2500 kg Cummins M11-C 184 kW (250 ps / 247 hp) at 1700 rpm 198 kW (269 ps / 265 hp) at 1700 rpm 1177 Nm (120 kgm) at 1300 rpm 565 l 2 x variable displacement axial piston pump 31.4/34.3 MPa (320/350 kg/cm2) (Normal / Power Boost) 2 x 280 l/min 9.5 rpm 3.2/4.4 km/h 35 (70%) (backhoe only) 256.9 kN 11850 kg EC460 52.1 t 54.9 t 2060 l / 1800 l 26 m 14 m 2500 kg Cummins M11-C 221 kW (300 ps / 296 hp) at 2000 rpm 239 kW (325 ps / 321 hp) at 2000 rpm 1177 Nm (120 kgm) at 1500 rpm 665 l 2 x variable displacement axial piston pump 31.4/34.3 MPa (320/350 kg/cm2) (Normal / Power Boost) 2 x 330 l/min 8.0 rpm 2.8/4.3 km/h 35 (70%) (backhoe only) 320.7 kN 15500 kg

DIMENSIONS

Basic Machine
Description EC360 mm mm mm mm mm mm mm mm mm mm mm mm mm mm t 36,5 EC4290 44,7
A. Width superstructure B. Overall width C. Overall height of cab D. Tail swing radius E. Height of exhaust pipe F. Counterweight clearance G. Tumbler length H. Track length I. Track gauge J. Shoe width K. Min. ground clearance L. Overall length M. Swing centre to arm mounting N. Height arm mounting Overall Weight

3-piece demolition boom

Description A. Overall length B. Overall height back C. Overall height front Weight of Working Equipment w.o. attachment Weight of gradle stand mm mm mm t t

EC7,7 2,1

EC10,2 2,1
Standard quick fit backhoe equipment
Description A. Overall length* B. Lenght - mounting to arm end* C. Overall height* Attachment weight w.o. bucket
* with standard arm: 3,1 m / EC360 and 3,35 m / EC460
EC360 mm mm mm t 2040 6,0 6,4

EC7,4 8,2

Machine including 3-piece demolition attachment
Description A. Overall length B. Swing centre to front of equipment C. Maximum height (cab) D. Maximum height at boom end Operating Weight w. o. attachment mm mm mm mm t

EC44,2

ECxxxx 3401 54,9
Machine including standard quick fit backhoe equipment
Description A. Overall length* B. Swing centre to front of equipment* C. Maximum height* Operating weight
EC360 mm mm mm t 3710 42,5 42,9

EC52,1 52,9

WORKING RANGES
3-piece demolition attachment
22M 21M 20M 19M 18M 17M 16M 15M 14M 13M 12M 11M 10M

9M 8M 7M

6M 5M 4M 3M 2M 1M 0 12M
Working Ranges Description A. Max. pin height B. Max. forward reach ECm 11 m ECm 14 m
NOTE: Above dimensions are suitable for a maximum attachment weight of 2.500 kg incl. quick hitch and attachment plate.

Standard Equipment

Working Ranges of EC360 with direct fit bucket Description A. Max. digging reach B. Max. digging reach on ground C. Max. digging depth D. Max. digging depth (8' level) E. Max. vertical wall digging depth F. Max. cutting height G. Max. dumping height H. Min. front swing radius mm mm mm mm mm mm mm mm 7.1 m Boom 2.6 m Arm 7.1 m Boom 3.1 m Arm 7.1 m Boom 3.9 m Arm 7790 4860
Working Ranges of EC460 with direct fit bucket Description A. Max. digging reach B. Max. digging reach on ground C. Max. digging depth D. Max. digging depth (8' level) E. Max. vertical wall digging depth F. Max. cutting height G. Max. dumping height H. Min. front swing radius mm mm mm mm mm mm mm mm 7.9 m Boom 2.55 m Arm 7.9 m Boom 3.35 m Arm 7.9 m Boom 3.9 m Arm 7.9 m Boom 4.8 m Arm 10070 5020
Digging forces with direct fit bucket of EC360: Description Bucket tip radius Breakout force-bucket (Normal / Power boost) Tearout force-arm (Normal / Power boost) Rotation angle, bucket Digging forces with direct fit bucket of EC460: Description Bucket tip radius Breakout force-bucket (Normal / Power boost) Tearout force-arm (Normal / Power boost) Rotation angle, bucket ISO ISO mm kN kN 3.35 m Arm 7.0 m Boom 1850 250.8/274.4 195.0/212.3.9 m Arm 7.0 m Boom 1850 260.8/274.4 174.7/191.4.8 m Arm 7.0 m Boom 1850 250.8/274.4 159.1/174.ISO ISO mm kN kN 2.6 m Arm 6.45 m Boom 1700 227.0 /248.3 184.4/201.3.1 m Arm 6.45 m Boom 1700 227.0/248.3 156.0/170.3.9 m Arm 6.45 m Boom 1700 227.0/248.3 134.6/147.3 182

STANDARD EQUIPMENT

Engine
Low-emission engine with air heater, complying with EPA (Environment Protection Association, USA) emission standards 2-stage air filter with indicator Pre-cleaner Electric engine shut-off Fuel filter and water separator Alternator 70A Start motor, 24V/7.8kW Fuel filler pump: 50 Ipm, with automatic shut-off - Boom mounted 4 - Cab mounted 3, (front 2, rear 1) - Counterweight mounted 1, (rear) Batteries, 2 x 12V/200Ah Pump flow control for hammer & shears Automatic two-speed travel motors Hydraulic oil, lSO VG 46 suppressed, includes: - Ashtray - Cigar lighter - Door locks - Floor mat - Horn - Large storage area - Pull-up type front window - Removable lower windshield - Seat belt - Safety glass - Windshield wiper with intermittent feature

Superstructure

Access way with handrail Counterweight - kg (EC360) - kg (EC460) Tool storage area Punched metal anti-slip plates Undercover (heavy duty) Side impact protection system (SIPS)

Hydraulic system

Automatic sensing work mode - Summation system - lift and arm functions - Boom priority - switch - Arm priority - Swing priority Boom and arm flow regeneration Arm flow regeneration1) Anti-rebound valve1) Hose rupture protection valve: - 2-piece boom - intermediate section2) Oil leak lines Boom and arm holding valves Multi-stage filtering system Straight travel circuit Hydraulic piping - Hammer & shears: 2 pump flow Additional return filter3) Quick-fit plus piping Cylinder cushions Cylinder contamination seals Pilot-operated wrist control joysticks with 5 switches ea.

Cab and interior

Air-conditioner Heater Cab mounted falling object protective structure (FOPS) over enlarged glazed sky light Sun shield, front Stereo cassette radio (AM/FM) Safety grille for front window Master ignition key Hydraulically dampened cab mounts Adjustable operator seat and control console Flexible antenna 3/4 glazed safety glass roof with washer wiper Hydraulic safety lock lever Cab, all-weather sound

Undercarriage

Hydraulic track adjusters Greased and sealed track chain Track guards LC (Long crawler) Undercover (heavy duty)
Electronic control system
Advanced control system (ACS) Integrated mode selection system Self-diagnostic system Machine status indication Engine speed sensing power control "Power Max" mode system Automatic idling system One-touch power boost Automatic engine warm-up Safety stop/start function Adjustable monitor Master disconnect switch Engine restart prevention circuit Overload warning device (TMI) Powerful halogen lights: - Frame mounted 2
(only on EC460) (only 3-piece demolition) 3) (only for backhoe equip.)

ALTERNATIVE EQUIPMENT

Fabric seat Fabric seat, with heater Fabric seat, with heater and air suspension Seat and control consoles mounted on a tiltable frame

Track shoes EC360

LC: 600/700/800/900 mm track shoes with triple grousers
Front end equipment EC360
Boom: 3-piece demolition - pin on: 20 m pin height - quick fit: 20 m pin height Boom for backhoe: 7.1 m Arm for backhoe: 2.6 / 3.1 / 3.9 m
Front end equipment EC460
Boom: 3-piece demolition - pin on: 26 m pin height - quick fit: 26 m pin height Boom for backhoe: 7.9 m Arm for backhoe: 2.55 / 3.35 / 3.9 / 4.8 m

Track shoes EC460

LC: 600/700/750/800/900 mm track shoes with triple grousers
OPTIONAL EQUIPMENT (Standard in certain markets)
Block and oil pan heater: 240V Fuel warmer Tropical kit
Hose rupture protection valve: - standard backhoe arm Volvo hydraulic quick-fit: - S3 size backhoe - S1 size demolition Hydraulic oil, ISO VG 32 Hydraulic oil, ISO VG 68

Service walk (only EC460)

Service

Hand lamp Spare parts Tool kit
Falling object guard (FOG) Rain shield, front Anti-vandalism kit Hydraulic tilting cab
Rotating warning beacon Travel alarm

Demolition

Water supply plus nozzles Storage cradles for 3-piece demolition equipment of backhoe equipment
Full track guards Heavy duty toolbox
Under our policy of continuous improvement, we reserve the right to change specifications and design without prior notice. The illustrations do not necessarily show the standard version of the machine.
Volvo Construction Equipment
Ref. No. English, global Printed in Germany 2001.3 EXC Volvo, Konz