Reviews & Opinions
Independent and trusted. Read before buy Tissot T-touch!

Tissot T-touch

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Tissot T-touch, size: 828 KB
Related manuals
Tissot T-touch Expert
Tissot T-touch Multifonctions

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Tissot T-touchAbout Tissot T-touch
Here you can find all about Tissot T-touch like expert and other informations. For example: navigator 3000, battery replacement, expert pilot, expert titanium, review, manual.

Tissot T-touch manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Tissot T-touch please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Tissot T-touch photo ]

Video review

Tissot T Touch Review

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 1. Page 1 of 1. Average Rating:
Zane 4:07pm on Saturday, May 29th, 2010 
I have always been a lover of wrist watches and have aquired over the years a small collection.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

T-TOUCH EXPERT Users Manual

Acknowledgements

We would like to thank you for choosing a TISSOT watch, a Swiss brand among the most highly renowned in the world. Your T-TOUCH watch has the most recent technical innovations. It gives you a constant analogue time display and a variety of digital displays. In addition, the following functions can be accessed simply by touching the glass: Weather, Altimeter, Chronograph, Compass, Alarm and Thermometer.

w ww. ti ss o t.c h

141_EN

T-TOUCH EXPERT

Functions
2nd function 1st function 1st function 2nd function
Activate touchsensitive glass

Activate light

Water resistance: 10 bar (100 m / 330 ft)
Time T Time T2 Alarm 2 Active touch-sensitive glass
R Relative pressure, Active altitude difference meter A Absolute pressure, Azimuth
Battery type: button-type lithiummanganese dioxide primary battery cell.
Activate touch-sensitive glass / Activate light

CHRONO Chronograph

Centre Date

CHRONO Timer

Centre Time 1

COMPASS Compass

Centre Time 2

COMPASS Azimuth

Centre Options

COMPASS Calibration

METEO Weather, relative pressure

ALARM Alarm 1

METEO Weather, absolute pressure

ALARM Alarm 2

ALTIMETER Altimeter

THERMO Thermometer

ALTIMETER Altitude difference meter

General user information

Activating the touch-sensitive glass Activating the light Setting mode

2 sec. 1 sec. 2 sec.

Display mode

Activate the glass

The display light will stay on for 5 seconds.
Date display = Default display

Select a function

When the glass is activated, the symbol will flash on the digital display. If the glass is not touched, it will automatically deactivate after 15 seconds. Exception: In compass and altitude difference meter mode, the glass will deactivate after 30 seconds Touch one of the 7 touch-sensitive areas of the glass to activate the corresponding function.

Time 1 display: T

Time 2 display: T2
: move display and/or hand

position forward

position backward
Options Display Return to Date display
If no manipulation for 10 seconds, the setting mode is deactivated.
Setting > Times t & T2
Pressing and holding or will move the hands forward or backward. After a full revolution, the minutes hand will stop and the hour hand advances/reverses in steps of one hour. Time T2 is set in steps of 15 minutes. 2 sec. 1 sec.

Activate glass

Time T or T2 display (example: T)

Setting mode

: forward 1 min. : back 1 min. (hands and display)
Validate setting a) The seconds restart at zero b) The seconds continue

Setting > Date

The calendar is perpetual, i.e. the number of days per month is predefined. In continuous setting, the days scroll past slowly at first, and then quicker. After a full month, the calendar scrolls in months, and then likewise in years. 2 sec. 1 sec.

Date display

: forward one day : back one day

Validate setting

Reading > Options

1 sec.

Options display (see page 3)
Switch to sub-menus: Units display

Beep display

Automatic switch to standby mode after 5 seconds Beep every second

Climate zone display

Back to units display
At any time: exit sub-menu back to date display

Setting > Units

2 sec. or

Units display

Select mode 12/24 hours in 12 hour mode, the letter A (AM) or P (PM) appears between minutes and seconds when setting the time
Select Mode " C / m" or " F / ft"
Validate setting. Selecting 12 hour mode displays the date in the format 12.27.2007 (month, day, year), and 24 hour mode in the format 27.12.2007 (day, month, year).

Setting > Beep

2 sec. or or
Deactivating the sound silences adjustment beeps but not the alarms.
Activated = on , Deactivated = off

Setting > Standby

Standby mode is a battery economy mode. All the functions are deactivated, with only the time & date counters updated. This mode economises the battery when the watch is not being worn.

a) The watch is in standby Automatic switch to standby mode after 10 seconds Beep every second
Back to time & date mode
/ : stop the count, b) the watch does not switch to standby mode
Setting > Hemisphere and climate zone
To get the best from the altimeter function, it is possible to adjust the hemisphere and climate zone to your geographic location. Select your climate zone according to the simplified Koeppen climate classification (see illustration on right). If the watch is not set ("No Set"), the standard atmosphere model is used: set temperature at sea level = 15C, mean pressure at sea level: 1013.25 hPa

Temperate

Tropical

Mediterranean

Select hemisphere: North = North, South = South not set = not set
Set the local climate: T = temperate; M = Mediterranean; A = arid; tr = tropical; P = polar
SETTING > SYNCHrONISATION
The watch needs to be synchronised if the watch hands do not display the same time as the digital display, or if they are not correctly superimposed when accessing the functions. The watch is desynchronised when its electric motors mechanism is disturbed due to heavy impacts for example. N.B.: The glass must be active to access the synchronisation mode.

Synchronised

Desynchronised

or 5 sec. or or

Synchronisation setting mode The hands should be perfectly superimposed in the 12 o'clock position
Position the hour hand at 12 o'clock
Position the minutes hand at 12 o'clock
Validate setting Return to Time T mode

WEATHER

In weather mode, the hands are superimposed to indicate the weather trend.
Relative pressure display in hPa
Absolute pressure display in hPa
Setting > Relative pressure presetting
Setting this pressure changes the altitude displayed. The possible relative pressure is deliberately limited between 950 hPa and 1100 hPa.

2 sec.

: up one hectopascal : down one hectopascal

Glossary > weather

Description of function In weather mode, the hands are superimposed to indicate the weather trend. Explanations Weather changes are related to variations in atmospheric pressure. When atmospheric pressure increases the sky clears. The area is then referred to as a "high pressure" area or "anticyclone" (A). When atmospheric pressure decreases the sky clouds over. The area is then referred to as a "low pressure" area or "depression" (D). The T-Touch measures these pressure variations and indicates the weather trend with the hands, which can adopt the following 7 positions according to the weather developments: - 6: Big pressure drop, rapid deterioration - 4: Moderate pressure drop, probable deterioration - 2: Small pressure drop, probable slight deterioration 12 o'clock: No notable weather change + 2: Slight pressure rise, probable slight improvement + 4: Moderate pressure rise, probable improvement + 6: Big pressure rise, rapid improvement The T-Touch program takes account of atmospheric pressure variation over the last 6 hours to calculate the trend to indicate. Furthermore, the pressure variation caused by a rapid change in altitude is detected by the watch and compensated for automatically. So it only has a minimal impact on the barometric trend. The T-TOUCH digital display indicates the absolute and relative atmospheric pressure values in hectoPascals [hPa]. Absolute atmospheric pressure is the actual pressure at the time and place of measurement, and cannot be altered. Relative pressure is a value relative to sea level, based on local absolute atmospheric pressure. Barometers and weather charts show relative pressure values. The relative pressure value depends on the climate zone set, and can be preset on the watch. The relative pressure presetting is in line with the altitude. Characteristics of function Measurement range: absolute pressure: 300 hPa to 1100 hPa relative pressure: 950 hPa to 1100 hPa Accuracy: absolute pressure: 3 hPa relative pressure: varies with altimeter Resolution: 1 hPa Unit conversion: 1 hectoPascal [hPa] = 1 millibar [mb]

Altimeter

The altitude is displayed on the digital screen for 10 hours continuously. After 10 hours, the altimeter mode is deactivated, and the date is displayed.

Altitude display

Altitude difference display
setting > altitude presetting
: up 1 m or 3 ft : down 1 m or 3 ft

Glossary > ALTIMeTer

Sequentiallly every 2 seconds
Elapsed time or stopped time
Total cumulative gain in altitude during elapsed time

2 sec. 2 sec.

Mean vertical speed of descent (metres/minute or feet/minute)
Total cumulative loss in altitude during elapsed time
Back: Elapsed time or stopped time
Start Altitude difference meter
Stop Altitude difference meter
Reset Altitude difference meter
Description of function In altimeter mode, your T-Touch becomes a barometric altimeter, displaying the altitude relative to mean sea level. Explanations This is a barometric instrument, which calculates the altitude as a function of absolute pressure (atmospheric). As the altitude rises, pressure drops, and vice versa. So the altimeter measures the difference between absolute pressure (atmospheric) and relative pressure (relative to sea level) to display the altitude. Your T-Touch is temperature compensated, and you can adjust your geographic location (hemisphere and climate zone). The altitude displayed is therefore corrected automatically. This makes it the ideal instrument for measuring vertical movement with the altitude difference function (e.g. in mountain trekking). The altitude difference meter indicates the elapsed time, cumulative gains and losses in altitude and mean vertical speeds of ascent and descent. We advise you to stop the altitude difference meter during rest times and then restart it, in order to obtain more accurate results. Note 1: "Presetting" an altimeter means setting the actual altitude of a known point (see presetting procedure on page 7). The actual altitude values are indicated on various media: signposts, contour lines and spot heights on maps. The altitude "presetting" is in line with relative atmospheric pressure. Note 2: In an airliner, since the cabin is pressurised, your altimeter will not indicate an accurate altitude. Note 3: To optimise the accuracy of your altimeter, you are advised to select the climate zone, see page 5. Characteristics of function
Due to the use of pressure to calculate altitude, the altimeter is sensitive to variations in atmospheric pressure in weather changes. It is not uncommon to observe altitude differences of 100 m in a night. So the value displayed may vary without the altitude having actually changed.

4473 m 4473 m 4473 m

Weather change = pressure variation = displayed altitude change

CHRONO

Resolution: 1/100 sec / Measurement range: 99 hrs 5959 and 99/100 sec

Chrono display

Start chrono

Stop chrono

Split (partial time)
a) Flashing stop with partial time displayed, and chrono running in background
b) Restart the chrono counting the elapsed time

27.12.07

Reset chrono

CHRONO > TIMER

Measurement range: 23 hrs 5959

0.00.0000

Start/Stop

Timer display

0.01.16 34

Start or stop timer

0.01.34
Reload the last value on the timer
SETTING > CHRONO > TIMER

0.01.2052 0.01.3688

0.01.2052

0.01.3688

: forward : backward

13h4657

Compass
The minutes hand points to True North, factoring in the magnetic declination setting. In compass mode, the digital screen displays the angle between 12 o'clock and the minutes hand.

Compass display

Azimuth display

User compass calibration

Back to compass display
Setting > compass > magnetic declination
Setting mode and magnetic declination display
: +/- 1 degree East : +/- 1 degree West

compass > AZIMUTH

In compass mode, your T-TOUCH enables you to define and follow an azimuth. To do so, you need only set the azimuth value and align the watch using the arrows. The 6-12 oclock axis will indicate the heading to take.
a) Turn the 6-12 oclock axis left to align 12 oclock with the azimuth
b) Turn the 6-12 oclock axis right to align 12 oclock with the azimuth
c) The 6-12 oclock axis is aligned with the azimuth
Setting > compass > Compass calibration
: increase azimuth by 1 degree : decrease azimuth by 1 degree
Validate setting Back to azimuth display
Compass Calibration display
Activate calibration mode glass deactivated during calibration

Turn the watch more than a complete revolution on a horizontal surface (e.g. a table) in an environment free from magnetic interference, at a rotation speed of around 30 per second. Total time: 20 seconds maximum
a) Calibration successful data stored
b) Calibration failed repeat calibration

Glossary > compass

Compass In compass mode, your T-Touch indicates the True North Pole, factoring in magnetic declination. Azimuth explanations In azimuth mode, you T-TOUCH indicates the azimuth (heading) that you need to turn to. Azimuth explanations The azimuth is the horizontal angle between the direction of an object Heading and True North. The azimuth is measured from north in degrees from 0 to 359 (e.g.: East = 90). In azimuth mode, the T-TOUCH emits a beep and visual signal when the 6-12 oclock axis of the watch Azimuth is aligned with the heading set. 315o 12 o'clock represents the heading given by the azimuth relative to True North. Note 1 For a correct indication of North, it is extremely important to hold the watch as level as possible. Note 2 The compass function, like any other compass, should not be used near a metal or magnetic mass. In case of doubt, you can recalibrate your compass. Note 3 The rotating bezel, graduated from 0 to 359, provides another method for determining the azimuth.

Heading

Compass explanations The vertical lines (meridians) on the Earth converge at the True North Pole (Ng), indicating its direction. The hand of a conventional compass indicates the direction of the Magnetic North Pole (Nm). The angle () between these two directions Ng and Nm is known as magnetic declination. The magnetic declination value depends on your location on Earth. Furthermore, the Magnetic North Pole is constantly moving. So the magnetic declination value also depends on the date. If the correct magnetic declination value (for the location and date) is set (see the setting procedure on page 9), the minutes hand of your T-Touch will point to True North (Ng). If the magnetic declination is set to 0, your T-Touch will point to Magnetic north (Nm). The magnetic declination values and dates are indicated on topographic charts, or can be found using special software available on the Internet. For Switzerland: http://www-geol.unine.ch/geomagnetisme/Representation.htm For the whole world: http://www.ngdc.noaa.gov/seg/geomag/magfield.shtml

Azimuth 315o

Characteristics of function Accuracy: Resolution: 8 2
The 2 alarms are associated with time T. An alarm lasts 30 seconds, without repeating. When the programmed time is reached, you can stop the alarm by pressing one of the push-buttons.

Stop alarm

or 1 sec. or

Alarm 1 display

Alarm 2 display

Alarm rings

Setting > ALARM

2 sec. 1 sec. or or

Alarm 1 or 2 display
Activate or deactivate alarm
: time forward : time backward

THERMOmeter

Glossary > THERMOmeter
Description of function In thermometer mode, your T-Touch displays the ambient temperature. Explanations The temperature displayed corresponds to that of the watch case, so this temperature is influenced by your body temperature. That is why the temperature displayed may differ from the ambient temperature. To display the actual ambient temperature, the watch needs to be taken off for 15 to 30minutes, in order to be free from the influence of body temperature.

Thermometer display

Characteristics of function The temperature can be displayed in degrees Celsius [C] or degrees Fahrenheit [F]. (See procedure to follow for changing units on page 4). Conversion formulae: Measurement range: Accuracy: Resolution: T 0C = (T 0F -32) x 5/9 T 0F = T 0C x 9/5 + 32 5C to +55C / 23F to 130F 1C / 1.8F 0.1C/ 0.2F

Sensor fault

Warnings
Battery type: button-type lithium-manganese dioxide primary battery cell.
When a function is selected and the display is cleared, it is probably due to a failure of the selected function's sensor.
To activate the functions on your T-Touch a gentle press on the push-buttons or touch on the glass is all that is required. Excessive force may damage the watch. The brightness of the digital display decreases when the hands are in motion.

5 sec.

In fast continuous setting mode, the display moves at a faster rate (e.g. for date function: months or years instead of days) than in non-continuous or normal speed setting mode (e.g. for date: days instead of months or years). To exit fast continuous setting mode, you need to release the push-pieces for 3 seconds to continue in normal speed setting mode.

Error: the display is cleared

Back to date display

If this happens, please contact your retailer. The T-Touch is water-resistant to 10 bar (100 m / 330 ft) at 25C / 77F, but it is not an instrument suitable for sports diving. You must not use push-buttons when the watch is underwater. None of the functions can be activated if the glass is in contact with a liquid. Additional information in the "International Warranty Service centers" booklet

doc1

T-Touch, multifonctions Users manual
Minute hand Hour hand + correction / chrono

Rotating bezel

Activation / validation

Digital display

- correction / chrono
Scratch-resistant sapphire tactile crystal Page 9
Synchronisation Display mode Setting the time Setting the date Selecting the units

Tactile area

138_en / 03.11

www.tissot.ch

Congratulations
Congratulations on choosing to buy a Tissot watch, a Swiss brand with one of the greatest reputations in the world. Your T-Touch watch incorporates state-of-the-art technology. It offers permanent analogue display of the time as well as varied digital displays. In addition, the following functions are available by simply touching the crystal: meteo, altimeter, chronograph, compass, alarm and thermometer.

Important notes

For the best reading of the temperature, remove the watch from your wrist and wait for approximately 15 to 30 minutes. For more information see the explanation of the thermometer on page 13. For correct use of the altimeter, adjust it as often as possible. For more information see the explanation of the altimeter on page 12.
The METEO function indicates a trend. Hands superposed to the left of midday = bad weather, at midday = stable weather, to the right of midday = good weather. For more information, see the explanation of the METEO function on page 10. Your T-Touch is water-resistant to 3 bar (30 m / 100 ft), but it is not an instrument suitable for sports diving. It is not advisable to press the pushers while the watch is submerged. None of the functions can be activated if the crystal is in contact with a liquid.
General information on use
Activate the crystal by pressing When the crystal is activated, a flashing bar will appear on the digital display Select a function by touching the corresponding area on the crystal Brief pressures on the pushers = step by step movement of the hands or incrementation (decrementation) on the digital display Long pressures on the pushers = continuous movement or incrementation (decrementation) Incorrect operation of the pushers = different alarm signal from the normal beep No operation for 30 seconds = automatic deactivation of the crystal No operation for 3 seconds in setting mode = exit from setting mode.

Adjustment:

Touching action (without pressing)

Listening / Vision

Time for pressing on the pushers (e. g. 2 seconds)

Additional information

Repetitive actions

Hand position display

Care and maintenance
We recommend that you clean your watch regularly using a soft cloth and lukewarm water. After bathing in salt water, rinse your watch with fresh water and leave it to dry completely. Avoid exposing your watch to excessive variations in temperature or humidity, to strong sunlight or stong magnetic fields. Battery type: button-type lithium-manganese dioxide primary battery cell.

Synchronisation

Activation of the crystal Selecting the Units mode
and , bring Using pushers the 2 hands precisely to 12 oclock Incrementation of the minute hand (3 steps = 1 minute) Incrementation of the hour hand (3 steps = 1 minute) Validation of the setting
(1)Procedure allowing the digital display to be synchronised with the hands. Note: it is not necessary to perform this synchronisation operation when the digital display and the hands show the same time.

(h-m-s / date / units)

Display mode

1 h-m-s date(1) units(2)

Activation of the crystal Selecting the display mode
Return to h-m-s mode(3) (1)The h-m-s and date modes remain active. (2)The units mode is a temporary setting mode. (3)This procedure is valid when the crystal is activated for the ALTIMETER, CHRONO, COMPASS, ALARM, THERMO and METEO functions. www.tissot.ch 4/14 138_en / 03.11

Setting the time

Activation of the crystal Selecting the h-m-s mode (eg. 8 h 34 20)

2 + or - 1 minute

Activation of the setting(1) Incrementation or decrementation by one minute(2) Validation of the setting, the seconds restart at zero Validation of the setting, the seconds continue normally
(1)Accuracy: -0.3 to +0.5 seconds / day. (2)Press continuously on or to set the time. After one complete revolution, the minute hand stops and the hour hand advances in one hour steps.

Setting the date

Activation of the crystal Selecting the "date" mode (eg. 5 July)

2 + or - 1 day

Activation of the setting Incrementation or decrementation by one day Validation of the setting
(1)The calendar is semi-perpetual, that is the number of days per month is predefined. For February it is necessary to reset the date when it is only 28 days.

Selecting the units

Activation of the setting Selecting Celsius degree / metre or Fahrenheit degree / foot Selecting 12 or 24 hours(1) Validation of selections
(1) Selection of the 12 hour mode automatically inverts the calendar reading. (July 5) instead of (5 July). Example:
Indication of the meteorological tendencies(1)
Activation of the crystal
Activation of the meteo function(2)
(1)For more information, see the explanation of the meteo function on page 10. (2)The two hands indicate a tendency while the digital display gives a calculated pressure in hectoPascal (absolute value). After 30 seconds, the digital display returns to h-m-s mode.

CHRONO

Precise measurement of a specific duration
Activation of the crystal Activation of the chronograph(1)
Starting the chronograph Stopping the chronograph (eg. 10 and 34/100) Resetting the chronograph(2) (1)Resolution: 1/100 of a second Measuring range: 9 h and 99/100. (2)After 30 seconds, the hands display the time again but the digital display remains in CHRONO mode. After 10 h, the digital display returns to h-m-s mode.

CHRONO (split)

Precise measurement of a specific duration with intermediate time
Activation of the crystal Activation of the chronograph Starting the chronograph Displaying the intermediate time (eg. 48 and 15/100) Restarting the chronograph, taking into account the running time Stopping the chronograph (eg. and 88/100) Resetting the chronograph

Compass Indication of the geographical north

COMPASS

Activation of the crystal Activation of the compass function(1) Activation of the adjustment of the magnetic variation(2) + or - 1 degree Setting the magnetic variation to the east (+) or west (-) Validation of the setting (eg. 2 East)
(1)The minute hand points to the North. A more accurate reading is obtained by holding the T-Touch horizontally. The digital display gives the set magnetic variation. After 30 seconds, the digital display returns to h-m-s mode. (2)For more information, see the explanation of the magnetic variation on page 11.
1 Activation of the crystal Activation of the alarm function (eg. 12h19) 1 Activation of the alarm Deactivation of the alarm Setting the time + or - 1 minute Incrementation or decrementation by one minute Validation of the setting (1)When the programmed time is reached, the alarm can be stopped by pressing one of the pushers. The alarm bell sounds for 30 sec. and is not repeated. 8/14 138_en / 03.11

ALTIMETER

Indication of altitude in relation to sea level
Activation of the crystal Activation of the altimeter function(1)

2 + or - 1 step

Adjusting the altitude(2) Incrementation or decrementation (1 m or 3 ft) Validation of the setting
(1)The altitude is displayed in metres or feet depending on the units selection (see Selecting the units on page 6). After 30 seconds, the hands show the time again but the digital display remains in ALTIMETER mode. After 10 h, the digital display returns to h-m-s mode (2) The adjustment shows the altimeter setting at the value of the actual altitude. For more information, see the explanation of the altimeter on page 12.

THERMO

Indication of the temperature(1)
Activation of the crystal Activation of the thermometer function
(1)To obtain the best reading, it is necessary to remove the watch from your wrist and wait for approximately 15 to 30 minutes. For more information, see the explanation of the thermometer on page 13. (2)The temperature is displayed in degrees Celsius or in degrees Fahrenheit depending on the units selected (see selecting the units on page 6). After 30 seconds, the hands display the time again but the digital display remains in THERMO mode.

Glossary

Indication of the meteorological trend Description of the function In METEO mode, the watch hands are superposed to indicate the meteorological trend. Explanations Changes in weather are linked to variations in atmospheric pressure. The T-Touch watch measures these pressure variations and indicates the meteorological trend for the coming 24 hours. When atmospheric pressure increases, the sky clears. The hands move to the right. This is called a high pressure zone or anticyclone (A). When atmospheric pressure decreases, the sky clouds over. The hands move to the left. The is called a low pressure zone or depression (D). The change in pressure is measured and displayed using the hands which can assume the following 7 positions depending on the meteorological trend: -6 : Major drop in pressure, rapid deterioration -4 : Moderate drop in pressure, probable deterioration -2 : Minor drop in pressure, probable slight deterioration 12h: No notable meteorological change +2: Minor increase in pressure, probable slight improvement +4: Moderate increase in pressure, probable improvement +6: Major increase in pressure, rapid improvement The digital display gives the value of absolute atmospheric pressure in hectoPascals [hPa]. A 1020 Barometers and meteorological maps indicate the value of 1015 pressure respect to the sea level. 1010 Example: *-1010- : relative pressure in hPa Comparison when the weather is stable:

Altitude [m]/[ft] / / 6562 Barometer Relative pressure [hPa] 1013.25 1013.25 1013.25 T-Touch Absolute pressure [hPa] 1013.25 900.8 798.5

Variable

D 990 995
(D) : Depression (A) : Anticyclone Miscellaneous information The program on your T-Touch takes into consideration variations in atmospheric pressure over the previous 8 hours to calculate the trend to be displayed, ensuring greater reliability and precision than a mechanical barometer which only displays an instantaneous trend. Furthermore, the variation in pressure caused by a rapid change in altitude is detected by the program and compensated for automatically. It therefore has no influence on the barometric trend. Unit conversion: 1 hectoPascal [hPa] = 1 millibar [mb] Technical data Measuring range: Accuracy: Resolution: www.tissot.ch 300 hPa to 1100 hPa 3 hPa 1 hPa 10/14 138_en / 03.11
Compass, indication of geographical North Description of the function In COMPASS mode, your T-Touch indicates the geographical north pole, taking the magnetic variation into consideration.
Explanations The vertical lines (meridians) on a globe converge toward the geographical north pole (Ng) and indicate its direction. The pointer on a conventional compass indicates the direction of the magnetic north pole (Nm). The angle (a) between these two directions is called the magnetic variation. The value of the magnetic variation therefore depends on your position on the globe. Furthermore, the magnetic North pole is constantly changing. The value of the magnetic variation therefore also depends on the date. When the correct value (depending on place and date) of the magnetic variation is set (see the adjustment procedure on page 8), the minute hand on your T-Touch displays the direction of the geographical North (Ng). The values and dates of the magnetic variation are displayed on topographical maps or can be searched for using special software available on Internet.
Miscellaneous information If you set the magnetic variation to 0, your T-Touch will display the magnetic North (Nm). The COMPASS function, as any other compass, must not be used near a metal or magnetic object. Thanks to its rotating bezel, you can use the compass of your T-Touch watch to orient a map. The bezel ring is graduated with the following values: - 30between two points; - 15between a cardinal point (N,E,W,S) and the closest points. It is very important that you hold the watch as horizontal as possible to obtain a true indication of North. Technical data Accuracy: Resolution: 138_en / 03.1 11/14 www.tissot.ch
Indication of altitude in relation to sea level Description of the function In ALTIMETER mode, your T-Touch is transformed into a barometric altimeter and displays the altitude in relation to the average sea level. Explanations As this instrument is barometric, it calculates the altitude according to atmospheric pressure. As altitude increases, pressure decreases and vice versa. Therefore, the altimeter measures the difference in pressure and displays the altitude. It is therefore an ideal instrument for measuring ascents. (e. g. when hiking in the mountains).

2000m 1500m 1000m 500m 0m

P = pressure

Warning!
As pressure is used to calculate the altitude, the altimeter is sensitive to variations in atmospheric pressure as the weather changes. It is not uncommon to see differences in altitude of 100 m in one night. The value displayed may vary without your altitude actually changing. Change in weather = variation in pressure = modification of altitude displayed
Thus it is necessary to calibrate the altimeter as often as possible. Note: Calibrating an altimeter means setting it to the actual altitude of a known point (see the setting procedure on page 9). The values of actual altitudes can be found from various sources: signs, contour lines and benchmarks on maps. The altitude calibration must be related to the ambient atmospheric pressure.
Miscellaneous information Your T-Touch compensates for temperature. The altitude displayed is therefore corrected automatically. The altimeter makes a measurement every 10 seconds. Your altimeter will not show the variations in altitude in an aircraft as the cabin is pressurised (constant pressure). Unit conversion: 1 metre [m] = 3.281 feet [ft] 1 foot [ft] = 0.305 metres [m] Average pressure, at sea level: 1013.25 hPa Average variation in pressure and temperature depending on altitude.
Altitude [m] / [ft] / / / 6513 Pressure [hPa] 1013.Temperature [C] / [F] 20 / 68 19.3 / 66.7 13.6 / 56.4 7.3 / 45.2
Technical data Measuring range: Resolution: www.tissot.ch
- 400 m to +9000 m - 1300 ft to +29500 ft 1 m 3 ft 12/14 138_en / 03.11
Temperature display Description of the function In THERMO mode, your T-Touch is transformed into a thermometer and displays the ambient temperature.
Explanations The temperature displayed is the temperature of the watch case. Its temperature is therefore influenced by your body temperature. Thus, the temperature displayed may be different from the ambient temperature.
To display the actual ambient temperature, the watch must be taken off for about 15 to 30 minutes so that it is no longer affected by your body temperature.
Miscellaneous information The temperature may be displayed in degrees Celsius [C] or degrees Fahrenheit [F]. (see page 6 for the procedure for changing these units). Conversion formulae: 5 TC = (TF - 32) x 9 TF = TC x 9 + -10C to +60C 1C 0.4C 15F to 140F 1.8F 0.7F

Technical data Measuring range: Accuracy: Resolution:

Trouble shooting

Trouble Cause Solution
The display alternates between bat and the time (EOL) The display goes out and the hands stop The battery is discharged Ask an approved Tissot dealer to change the battery
In meteo mode the display shows hPa but no value The pressure sensor is faulty Ask an approved Tissot dealer to repair the watch
In meteo mode the two hands are not exactly over noon Normal operation of the watch (trend between -6 and +6 minutes) See the description of the METEO function on page 6 See the glossary, explanation of the METEO function on page 10
When the ALTIMETER/CHRONO/ALARM/THERMO functions are selected, the two hands are not perfectly superimposed The time indicated by the hands is different to that shown in the digital display The hands are no longer synchronised Synchronise the hands, see page 4
The compass does not show geographical north Magnetic variation is incorrectly adjusted Adjust magnetic variation, see page 8 The compass is faulty Ask an approved Tissot dealer to repair the watch
I adjusted the altitude yesterday and the value is not the same today Normal operation of the watch (difference in pressure) See the description of the ALTIMETER function on page 9

 

Tags

2233BW 6600T 150SL 32PF7521D R4360 28PW5407 WF7708N6w1 XSA DLS PS4 Smartview Expert Pilot 7000N A-X500 VP-D200 VAD-HA LX-M140 LN46A850s1F Expert Titanium Versatis 1590 Fiat 600R 1LE031SLX VSX-D510 DMR-EH63 HD7830 STR-DE605 BMG18AE Option Ktcmqpd ESF2410 16I-MB DC8388BR 2 8 Navigator 3000 996-2000 P5K EPU FR-2550 Asus P5E DSC-P41 Ultra Zoom STR-D315 HMB406 DTR67320T 320 GB LE32C350d1W 37PFL9603D P4V800-X NV-FS200B LN32A450 LAV72730-W Diver Silver Evo3 PMD222 DN-X900 NAD 7140 DVP-NS400D Watch 8203 YST-SW225 Standard LC-30HV2E M4410 Battery Replacement DSP2024P Models RM-V310A Asus A2 SRF-M73 40-ID Cooker M420E DVP-F21 Create Zxlcd ZWF1432W IVA-W505R MAX-VJ550 E 510 Review Xpressmusic Gaiden VGN-N31s-W 48810 Manual VPL-CS4 Travelmate 250 S12AHN Mouth FAX 3150 PM-600 DCR-SX53E Congress 100 KH 4001 Laserjet 9050 Controller Kudi24SE ZWG6125 PS-3100 HT-BD2ET Carmageddon II XL-2004 Cingular 3125 Utilities DSC-W5 RM-PP413 DMC-FT2 P4VM8 SB5100 Galeo 6255

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101