Reviews & Opinions
Independent and trusted. Read before buy Linksys WMB54G!

Linksys WMB54G

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Linksys WMB54G, size: 2.9 MB
Related manuals
Linksys WMB54G Quick Installation
Linksys WMB54G Product Brochure

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Linksys Wireless-G Music Bridge WMB54G Network audio player
The Linksys Wireless-G Music Bridge lets you bring the digital music streaming to or stored on your computer to your Home Entertainment Center, without running cables through the house. Using a wireless connection, the Music Bridge finally frees your digital music collection from those little computer speakers to play in full glory through your stereo or surround sound system. The Wireless-G Music Bridge sits by your home stereo and connects to it using standard consumer electronics cables. Then... Read more

 

[ Report abuse or wrong photo | Share your Linksys WMB54G photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

Figure 4-2: Portable Audio Speaker Connection Figure 4-3: RCA Cable Figure 4-4: RCA Cable Connection Figure 4-5: Optical Digital Cable Figure 4-6: Optical Digital Cable Connection Figure 4-7: Digital Coaxial Cable Figure 4-8: Digital Coaxial Cable Connection Figure 5-1: Utility Icon Figure 5-2: Status Tab Figure 5-3: Equalizer Tab Figure 5-4: Information Tab Figure 6-1: Password Figure 6-2: Setup - Infrastructure Figure 6-3: Setup - Ad-Hoc Figure 6-4: Search Figure 6-5: Security - WEP Figure 6-6: Security - PSK (Pre-Shared Key) Figure 6-7: Password Figure 6-8: Advanced Figure 6-9: Status Figure 6-10: Help Figure C-1: Upgrade Firmware

Welcome

Thank you for choosing the Wireless-G Music Bridge. The Wireless-G Music Bridge allows you to listen to digital music in your living room as well as on your computer. How does the Music Bridge do all of this? The Linksys Wireless-G Music Bridge lets you bring the digital music streaming to or stored on your computer to your Home Entertainment Center without running cables through the house. Using a wireless connection, the Music Bridge finally frees your digital music collection from those little computer speakers to play in full glory through your stereo or surround sound system. The Wireless-G Music Bridge sits by your home stereo and connects to it using standard consumer electronics cables. Then it connects to your home network by Wireless-G wireless networking, or if you prefer, it can be connected via standard 10/100 Ethernet cabling. The included software creates a virtual sound system in your PC, which sends the audio output of any application to the Music Bridge and the stereo system. Use your favorite media player to play your music while listening in the comfort of your living room. Use the instructions in this Guide to help you connect the Wireless-G Music Bridge, set it up, and configure it to bridge your music networks. These instructions should be all you need to get the most out of the Wireless-G Music Bridge.
Chapter 1: Introduction Welcome

Whats in this Guide?

This user guide covers the steps for setting up and using the Wireless-G Music Bridge. Chapter 1: Introduction This chapter describes the Adapters applications and this User Guide. Chapter 2: Getting to Know the Wireless-G Music Bridge This chapter describes the physical features of the Adapter. Chapter 3: Setting up the Wireless-G Music Bridge This chapter instructs you on how to use the Bridgess Setup Wizard and configure the Bridge. Chapter 4: Connecting the Wireless-G Music Bridge This chapter shows you how to connect the Bridge to your speakers. Chapter 5: Using the Wireless-G Music Bridge Utility This chapter shows you how to use the Bridges Utility. Chapter 6: Configuring the Wireless-G Music Bridge This chapter show you how to use the Bridges Web-based utility. Appendix A: Troubleshooting This appendix describes some potential problems and solutions, as well as frequently asked questions, regarding installation and use of the Adapter. Appendix B: Wireless Security This appendix discusses security issues regarding wireless networking and measures you can take to help protect your wireless network. Appendix C: Windows Help This appendix describes how you can use Windows Help for instructions about networking, such as installing the TCP/IP protocol. Appendix D: Glossary This appendix gives a brief glossary of terms frequently used in networking. Appendix E: Specifications This appendix provides the Adapters technical specifications. Appendix F: Warranty Information This appendix supplies the Adapters warranty information.

Chapter 1: Introduction Whats in this Guide?
Appendix G: Regulatory Information This appendix supplies the Adapters regulatory information. Appendix H: Contact Information This appendix provides contact information for a variety of Linksys resources, including Technical Support.

The Back Panel

The Bridge's ports, where all cables are connected, are located on the back panel.
Figure 2-1: Back Panel Audio Out L/R The Audio Out (Left and Right) ports connect to the Audio In (Left and Right) ports of your audio receiver. The Line Out port is where you can connect headphones or portable audio speakers with a headphone jack. The Coaxial Out (Digital Audio) port is where you connect the cable coming from your audio receiver. The Optical Out (Digital Audio) port is where you connect the cable from the Optical In port of your audio receiver. This Ethernet port connects to Ethernet network devices, such as a switch or router, if using a wired connection. There are two ways to Reset the Bridge's factory defaults. Either press the Reset Button, for approximately ten seconds, or restore the defaults from the Password tab in the Bridge's WebBased Utility. The Power port is where you will connect the power adapter.

Line Out

Coaxial Out

Optical Out

Ethernet

Reset Button

Important: Resetting the Music Bridge will erase all of your settings and replace them with the factory defaults. Do not reset the Bridge if you want to retain these settings.
Chapter 2: Getting to Know the Wireless Music Bridge The Back Panel

The Front Panel

The Music Bridge's LEDs, where information about network activity is displayed, are located on the front panel.

Power Power

Wireless
Blue. The Power LED lights up when the Wireless-G Music Bridge is powered on. Figure 2-2: Front Panel
Blue. The Ethernet LED serves two purposes. If the LED is continuously lit, the Music Bridge is successfully connected to a device through the Ethernet port. If the LED is flashing, it is an indication of any network activity. Blue. The Wireless LED lights whenever there is a successful wireless connection.

With these, and many other, Linksys products, your options are limitless. Go to the Linksys website www.linksys.com for more information about products that work with the Music Bridge.
Chapter 2: Getting to Know the Wireless Music Bridge The Front Panel
The Bridge is set up with the Setup Wizard that comes on the CD enclosed with the Bridge. This chapter will guide you through the setup procedure. This Setup Wizard will take you through all the steps necessary to set up and configure the Bridge.
To begin the setup process, insert the Setup Wizard CD into your PC's CD-ROM drive. Setup Wizard's Welcome screen should appear on your monitor. If it does not, then click the Start button and select Run. In the field provided, enter D:\setup.exe (if D is the letter of your PC's CD-ROM drive). On the Welcome screen, you have the following choices: Click Here to Start - Click the Click Here to Start button to begin the setup. User Guide - Click the User Guide button to open this User Guide. Exit - Click Exit to exit the Setup Wizard. Figure 3-1: Setup Wizards Welcome Screen
1. To install the Adapter, click the Click Here to Start button on the Welcome screen.
2. The License Agreement screen will appear. Read the entire agreement, then click Next if you agree to the terms and want to continue the Setup Wizard. Click Cancel if you want to cancel the Setup Wizard.
Figure 3-2: License Agreement
Chapter 3: Setting up the Wireless-G Music Bridge Starting the Setup Wizard
3. The next screen displayed shows how the Bridge should be connected. Connect one end of your supplied Ethernet cable to your PCs Ethnet Port. Click the Next button to continue or Back to return to the previous screen.
Figure 3-3: Connecting the PC
4. Connect the other end of the Ethernet cable to the Bridges yellow Ethernet Port. Click the Next button to continue or Back to return to the previous screen.
Figure 3-4: Connecting the PC to the Bridge
5. Next, you will connect the power. Connect the power adapter into the Power Port of the Bridge and into an electrical outlet. Click the Next button to continue or Back to return to the previous screen.
Figure 3-5: Connecting the Power
6. The Power and Ethernet will light up when the cables are all correctly installed. If the LEDs do not light up, recheck the cable connections to the Bridge, PC, and Power. Click the Next button to continue or Back to return to the previous screen. Click the Exit button to exit the Setup Wizard.

Figure 3-12: PSK Needed for Connection 2. The Install the Utility screen will appear if the Utility is not installed on your PC. The Utility must be installed on your PC for the Wireless-G Music Bridge to work correctly on your network. Click Next to install the Utility. Click Skip if you want to install the Utility later.
Figure 3-13: Install the Utility 3. After the Bridge has been configured for the network, the Congratulations screen will appear. Click Exit.
Congratulations! Setup is complete.
Figure 3-14: Congratulations
Setting Up the Bridge with Manual Setup
If your network is not listed with the available networks, click Manual Setup on the Available Wireless Network screen to set up the Bridge manually. 1. After clicking Manual Setup, the Network Settings screen will appear. If your network has a router or other DHCP server, click the radio button next to Obtain network settings automatically (DHCP). If your network does not have a DHCP server, click the radio button next to Specify network settings. Enter an IP Address, Subnet Mask, Default Gateway, and DNS addresses appropriate for your network. You must specify the IP Address and Subnet Mask on this screen. If you are unsure about the Default Gateway addresses, leave these fields empty. IP Address - This IP Address must be unique to your network. Subnet Mask - The Bridges Subnet Mask must be the same as your wired networks Subnet Mask. Default Gateway - Enter the IP address of your networks Gateway here.
Click Next to continue, or click Back to return to the Available Wireless Network screen. Figure 3-15: Network Settings 2. The Wireless Mode screen shows a choice of two wireless modes. Click the Infrastructure Mode radio button if you want to connect to a wireless router or access point. Click the Ad-Hoc Mode radio button if you want to connect to another wireless device directly without using a wireless router or access point. Then, enter the SSID for your network. Infrastructure Mode - Use this mode if you want to connect to a wireless router or access point. Ad-Hoc Mode - Use this mode if you want to connect to another wireless device directly without using a wireless router or access point. SSID - This is the wireless network name that must be used for all the devices in your wireless network. It is case- sensitive and should be a unique name to help prevent others from entering your network. Click Next to continue or Back to return to the previous screen. Figure 3-16: Wireless Mode

PSK offers two encryption methods, TKIP and AES, with dynamic encryption keys. Select TKIP or AES for encryption. Then enter a Passphrase that is 8-63 characters in length. Encryption - Select the type of algorithm you want to use, TKIP or AES, from the Encryption drop-down menu. Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field. Click the Next button to continue or the Back button to return to the previous screen. Figure 3-20: Wireless Security - PSK
5. The next screen displays all of the Bridges settings. If these are correct, click Next to continue and finish the setup. If these settings are not correct, click Back to change your settings. To exit the setup, click Exit.
Figure 3-21: Confirm New Settings
6. The Install the Utility screen will appear if the Utility is not installed on your PC. The Utility must be installed on your PC for the Wireless-G Music Bridge to work correctly on your network. Click Next to install the Utility. Click Skip if you want to install the Utility later.
Figure 3-22: Install the Utility
7. After the software has been successfully installed, the Congratulations screen will appear. Click Exit to exit the wizard. If you would like to subscribe to Yahoo! Music Unlimited, click Install Yahoo Music Engine.
Figure 3-23: Congratulations

Overview

This chapter explains how to connect the Bridge to your home entertainment centers audio receiver or to portable audio speakers. Before starting this chapter, make sure that you have set up and connected the Bridge to your PC, as explained in Chapter 3: Setting up the Wireless-G Music Bridge. IMPORTANT: Make sure to set up the Bridge before connecting it to your speakers. See Chapter 3: Setting up the Wireless-G Music Bridge.
Connecting to Portable Audio Speakers
To connect the Music Bridge to portable audio speakers, connect the speakers cable into the Line Out port on the back of the Music Bridge. Connect the power adapter to the Bridge and electrical outlet, if it is not connected.
Figure 4-1: Line Out Cable
Figure 4-2: Portable Audio Speaker Connection
Chapter 4: Connecting the Wireless-G Music Bridge Overview
Connecting to your Audio Receiver
Three connection methods are shown. One uses the standard audio cables supplied with your Wireless-G Music Bridge. The other two methods use digital cables. If you have a digital surround sound system, you will want to use optical digital or digital coaxial cables for better sound quality.

Figure 5-2: Status Tab 22
Chapter 5: Using the Wireless-G Music Bridge Utility Accessing the Wireless-G Music Bridge Utility

Equalizer Tab

The equalizer has presets for most types of music. Just click the button for the type of music youre listening to and the sound will be adjusted accordingly. You can make your own presets by adjusting the bars on the equalizer to your liking, clicking Save, then naming the preset when prompted. You can then access your custom presets in the Custom Equalizer drop-down menu.
You can adjust the sound according to the environment Figure 5-3: Equalizer Tab

Information Tab

This tab will display the Audio Driver Version and Utility Version. You will also be able to enable, by checking, the following three items: Show the Wireless-G Music Bridge Utility icon in the system tray. If you want to have easy access to the Utility and display the icon in the system tray, check this. Start the the Wireless-G Music Bridge Utility when I start Windows. If you want the Utility to open when you turn on your PC, check this. Access is limited to the first PC that uses the utility. If you want to use a different PC, uncheck this item. If you want access limited to one PC, check this. Figure 5-4: Information Tab
Chapter 5: Using the Wireless-G Music Bridge Utility Equalizer Tab
Linksys recommends using the Setup CD-ROM for first-time installation of the Music Bridge. If you do not wish to run the Setup Wizard on the Setup CD-ROM, then you can use the Web-based Utility to configure the Music Bridge For advanced users, you may configure the Music Bridges advanced settings through the Web-based Utility. Before you can access the Web Utility, you may need to set up a static IP address on your PC. Refer to Windows Help for more information to configure TCP/IP for static addressing. Make sure that after you finish with the Web Utility, that you switch back to the original network setting so your PC will work correctly with your network. We recommend that you use the following numbering scheme for an IP address: 192.168.1.X In this example, X is a unique, arbitrarily assigned number from 1 to 254. Do not use 210, because it is already assigned to the Bridge. You could use one of these examples: 192.168.1.17 192.168.1.44 In this case, 17 and 44 are arbitrary numbers between 1 and 254. Your computer will also require a subnet mask. Use this number: 255.255.255.0. The Default Gateway field should be left blank. This chapter will describe each web page in the Utility and each pages key functions. The utility can be accessed via your web browser through use of a computer connected to the Music Bridge. To access the Web-based Utility, launch Internet Explorer or Netscape Navigator, and enter the Music Bridges default IP address, 192.168.1.210, in the Address field. Then press Enter. A password request page will appear. (Non-Windows XP users will see a similar screen.) The first time you open the Web-based Utility, use the default password admin. (You can set a new password from the Password tab.) Then click the OK button. Figure 6-1: Password NOTE: The Wireless-G Music Bridge Utility should only be accessed AFTER connecting the Bridge. For more information on Setting Up and Connecting the Bridge, refer to Chapter 3: Setting Up and Connecting the Bridge.

Chapter 6: Configuring the Wireless-G Music Bridge Overview

The Setup Tab

The first screen that appears displays the Setup tab. This allows you to change the Bridge's general settings. Change these settings as described here and click the Apply button to apply your changes or Cancel to cancel your changes. Click the Help button if you need more information.
The Internet Setup section configures the Bridge to your Internet connection. Most of this information can be obtained through your ISP. Firmware. The Firmware version is displayed here. Regulatory Domain. The regulatorys domain is displayed here. Device Name. The name that you want to call your Bridge goes here. You may enter a name up to 19 characters. MAC Address. The Bridges MAC Address is displayed here. Configuration Type. Figure 6-2: Setup - Infrastructure Choose the configuration type that your network uses. Automatic Configuration - DHCP. If your network uses a router or other DHCP server and assigns your IP address automatically, select Automatic Configuration - DHCP. Static IP Address. If your network doesnt use a router or other DHCP server and uses a permanent IP address to connect to the Internet, select Static IP Address. IP Address. This is the Bridges IP address, when seen from the Internet. Your ISP will provide you with the IP Address you need to specify here. Subnet Mask. This is the Bridges Subnet Mask, as seen by users on the Internet (including your ISP). Your ISP will provide you with the Subnet Mask. Default Gateway. Your ISP will provide you with the Gateway Address, which is the ISP servers IP address.
Chapter 6: Configuring the Wireless-G Music Bridge The Setup Tab
The basic settings for wireless networking are set on this screen. MAC Address. Your Bridges MAC Address is displayed here. Wireless Mode. From this drop-down menu, you can select from Infrastructure or Ad-Hoc mode. If youll be connecting to a Bridge or access point, select Infrastructure. If youll be connecting directly to another wireless device without using a Bridge or access point, select Ad-Hoc. If youre using a wired connection, click Disabled. Channel. (For Ad-Hoc networks only.) Select the appropriate channel from the list provided to correspond with your network settings. Network Mode. (For Ad-Hoc networks only.) From this drop-down menu, you can select the wireless standards running on your network. If you have both 802.11g and 802.11b devices in your network, keep the default setting, Mixed. If you have only 802.11g devices, select Wireless-G-Only. Wireless Network Name (SSID). Enter the network name shared among all devices in your wireless network. If you dont remember the network name or you have more than one network, you may search for the network by clicking the Search button. Security. If you have security enabled on your wireless network, select Enabled. If you dont use security on your wireless network, select Disabled. To change the security settings on your Bridge, click Edit Security Settings. Figure 6-3: Setup - Ad-Hoc

The Password Tab

Password
You can change the Bridges password from here. Enter a new password and then type it again in the Confirm field to confirm.

Factory Defaults

Important: Resetting the Music Bridge will erase all of your settings and replace them with the factory defaults. Do not reset the Bridge if you want to retain these settings. If you want to reset the Bridge to to its original default settings and lose all of the settings that you have set, you can click the Restore Factory Defaults button. Change these settings as described here and click the Apply button to apply your changes or Cancel to cancel your changes. Click the Help button if you need more information. Figure 6-7: Password

The Advanced Tab

This screen is used to configure the advanced settings and should only be used by advanced users. Transmission Rate. The rate of data transmission should be set depending on the speed of your wireless network. You can select from a range of transmission speeds, or you can select Auto to have the Bridge automatically use the fastest possible data rate and enable the Auto-Fallback feature. Auto-Fallback will negotiate the best possible connection speed between the Bridge and a wireless client. The default value is Auto. Fragmentation Threshold. This value specifies the maximum size for a packet before data is fragmented into multiple packets. If you experience a high packet error rate, you may slightly increase the Fragmentation Threshold. Setting the Fragmentation Threshold too low may result in poor network performance. Only minor reduction of the default value is recommended. In most cases, it should remain at its default value of 2346. RTS Threshold. Should you encounter inconsistent data flow, only minor reduction of the default value, 2347, is recommended. If a network packet is smaller than the preset RTS threshold size, the RTS/CTS mechanism will
Chapter 6: Configuring the Wireless-G Music Bridge The Password Tab

Figure 6-8: Advanced 28

not be enabled. The Bridge sends Request to Send (RTS) frames to a particular receiving station and negotiates the sending of a data frame. After receiving an RTS, the wireless station responds with a Clear to Send (CTS) frame to acknowledge the right to begin transmission. The RTS Threshold value should remain at its default value of 2347. Change these settings as described here and click the Apply button to apply your changes or Cancel to cancel your changes. Click the Help button if you need more information.

The Status Tab

The Status Tab displays your Bridges current status and its settings. The Firmware, Regulatory Domain, Device Name. The local networks MAC Address, Configuration Type, IP Address, Subnet Mask, Default Gateway, will be displayed. The wireless networks MAC Address, SSID, Wireless Mode, Channel, Network Mode, and Security will be displayed. Firmware. The Bridges current firmware version is displayed here. Regulatory Domain. The regulatorys domain is displayed here. Device Name. This is the specific name for the Bridge that you set on the Setup Tab.

MAC Address. This is the Bridges LAN MAC Address. Configuration Type. This shows the network configuration type used by the Bridge. IP Address. This shows the Bridges IP Address, as it appears on your local, Ethernet network. Subnet Mask. This shows the Bridges Subnet Mask. Default Gateway. This shows the Bridges Default Gateway. Figure 6-9: Status
MAC Address. This is the Bridges wireless MAC Address. Wireless Network Name (SSID). This is the wireless network that the Bridge connects to.
Chapter 6: Configuring the Wireless-G Music Bridge The Status Tab
Wireless Mode. This displays the wireless mode, Infrastructure or Ad-Hoc, used by the network. Channel. This displays the wireless network channel that your Bridge uses. Wireless Mode. This displays the wireless mode (Mixed, Wireless-G Only) used by the network. Security. This displays what type of security the Bridge uses. Status. This displays the status of the connection between the Bridge and the wireless network.
Click the Refresh button if you need to refresh the screen. Click the Help button if you need more information.

Help Tab

The Help Tab provides Online Resources and Firmware Upgrade. Online Resources. Links are provided to the Linksys website, Linksys online support, and the Adobe website for downloading a PDF viewer. Firmware Upgrade. The Music Bridges firmware is upgraded through the Web-Utility's Help tab. Follow these instructions: 1. Download the firmware from Linksys's website at www.linksys.com. 2. Enter the location of the firmware's file or click the Browse button to find the file. 3. Then, click the Start to Upgrade button to upgrade the firmware. Figure 6-10: Help
Chapter 6: Configuring the Wireless-G Music Bridge Help Tab
This appendix consists of two parts: Common Problems and Solutions and Frequently Asked Questions. This appendix provides solutions to problems that may occur during the installation and operation of this product. Read the description below to solve your problems. If you can't find an answer here, check the Linksys website at www.linksys.com.

Appendix B: Wireless Security Security Threats Facing Wireless Networks
WPA Pre-Shared Key. If you do not have a RADIUS server, select the type of algorithm, TKIP or AES, enter a password in the Pre-Shared key field of 8-64 characters, and enter a Group Key Renewal period time between 0 and 99,999 seconds, which instructs the Router or other device how often it should change the encryption keys. WPA RADIUS. WPA used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router or other device.) First, select the type of WPA algorithm, TKIP or AES. Enter the RADIUS servers IP Address and port number, along with a key shared between the device and the server. Last, enter a Group Key Renewal period, which instructs the device how often it should change the encryption keys. RADIUS. WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router or other device.) First, enter the RADIUS servers IP Address and port number, along with a key shared between the device and the server. Then, select a WEP key and a level of WEP encryption, and either generate a WEP key through the Passphrase or enter the WEP key manually. Implementing encryption may have a negative impact on your networks performance, but if you are transmitting sensitive data over your network, encryption should be used. These security recommendations should help keep your mind at ease while you are enjoying the most flexible and convenient technology Linksys has to offer.
Appendix C: Upgrading Firmware
The Music Bridges firmware is upgraded through the Web-Utility's Help tab. Follow these instructions: 1. Download the firmware from Linksys's website at www.linksys.com. 2. Enter the location of the firmware's file or click the Browse button to find the file. 3. Then, click the Start to Upgrade button to upgrade the firmware.
Figure C-1: Upgrade Firmware

Appendix D: Windows Help

All wireless products require Microsoft Windows. Windows is the most used operating system in the world and comes with many features that help make networking easier. These features can be accessed through Windows Help and are described in this appendix.

TCP/IP

Before a computer can communicate within a network, TCP/IP must be enabled. TCP/IP is a set of instructions, or protocol, all PCs follow to communicate over a network. This is true for wireless networks as well. Your PCs will not be able to utilize wireless networking without having TCP/IP enabled. Windows Help provides complete instructions on enabling TCP/IP.

Shared Resources

IP Address - The address used to identify a computer or device on a network. IPCONFIG - A Windows 2000 and XP utility that displays the IP address for a particular networking device. IPSec (Internet Protocol Security) - A VPN protocol used to implement secure exchange of packets at the IP layer. ISP (Internet Service Provider) - A company that provides access to the Internet. LAN - The computers and networking products that make up your local network. MAC (Media Access Control) Address - The unique address that a manufacturer assigns to each networking device. Mbps (MegaBits Per Second) - One million bits per second; a unit of measurement for data transmission. NAT (Network Address Translation) - NAT technology translates IP addresses of a local area network to a different IP address for the Internet. Network - A series of computers or devices connected for the purpose of data sharing, storage, and/or transmission between users. Packet - A unit of data sent over a network. Passphrase - Used much like a password, a passphrase simplifies the WEP encryption process by automatically generating the WEP encryption keys for Linksys products. Ping (Packet INternet Groper) - An Internet utility used to determine whether a particular IP address is online. POP3 (Post Office Protocol 3) - A standard mail server commonly used on the Internet. Port - The connection point on a computer or networking device used for plugging in cables or adapters. Power over Ethernet (PoE) - A technology enabling an Ethernet network cable to deliver both data and power. PPPoE (Point to Point Protocol over Ethernet) - A type of broadband connection that provides authentication (username and password) in addition to data transport. PPTP (Point-to-Point Tunneling Protocol) - A VPN protocol that allows the Point to Point Protocol (PPP) to be tunneled through an IP network. This protocol is also used as a type of broadband connection in Europe. RADIUS (Remote Authentication Dial-In User Service) - A protocol that uses an authentication server to control network access.
RJ-45 (Registered Jack-45) - An Ethernet connector that holds up to eight wires. Roaming - The ability to take a wireless device from one access point's range to another without losing the connection. Router - A networking device that connects multiple networks together. Server - Any computer whose function in a network is to provide user access to files, printing, communications, and other services. SMTP (Simple Mail Transfer Protocol) - The standard e-mail protocol on the Internet. SNMP (Simple Network Management Protocol) - A widely used network monitoring and control protocol. SPI (Stateful Packet Inspection) Firewall - A technology that inspects incoming packets of information before allowing them to enter the network. SSID (Service Set IDentifier) - Your wireless network's name. Static IP Address - A fixed address assigned to a computer or device that is connected to a network. Static Routing - Forwarding data in a network via a fixed path. Subnet Mask - An address code that determines the size of the network. Switch - 1. A data switch that connects computing devices to host computers, allowing a large number of devices to share a limited number of ports. 2. A device for making, breaking, or changing the connections in an electrical circuit. TCP (Transmission Control Protocol) - A network protocol for transmitting data that requires acknowledgement from the recipient of data sent. TCP/IP (Transmission Control Protocol/Internet Protocol) - A set of instructions PCs use to communicate over a network. Telnet - A user command and TCP/IP protocol used for accessing remote PCs. TFTP (Trivial File Transfer Protocol) - A version of the TCP/IP FTP protocol that has no directory or password capability. Throughput - The amount of data moved successfully from one node to another in a given time period.

Appendix H: Regulatory Information
FCC Statement This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment or devices Connect the equipment to an outlet other than the receiver's Consult a dealer or an experienced radio/TV technician for assistance FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Safety Notices Caution: To reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord. Do not use this product near water, for example, in a wet basement or near a swimming pool. Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Industry Canada (Canada) This device complies with Canadian ICES-003 and RSS210 rules. Cet appareil est conforme aux normes NMB-003 et RSS210 d'Industry Canada.
User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products. Consumers are required to comply with this notice for all electronic products bearing the following symbol:
Dual-Band Wireless Access Point
For more information, visit www.linksys.com.
Appendix I: Contact Information
Need to contact Linksys? Visit us online for information on the latest products and updates to your existing products at: Can't find information about a product you want to buy on the web? Do you want to know more about networking with Linksys products? Give our advice line a call at: Or fax your request in to: If you experience problems with any Linksys product, you can call us at: Don't wish to call? You can e-mail us at: If any Linksys product proves defective during its warranty period, you can call the Linksys Return Merchandise Authorization department for obtaining a Return Authorization Number at: (Details on Warranty and RMA issues can be found in the Warranty Information section in this Guide.) http://www.linksys.com or ftp.linksys.com

 

Technical specifications

Full description

The Linksys Wireless-G Music Bridge lets you bring the digital music streaming to or stored on your computer to your Home Entertainment Center, without running cables through the house. Using a wireless connection, the Music Bridge finally frees your digital music collection from those little computer speakers to play in full glory through your stereo or surround sound system. The Wireless-G Music Bridge sits by your home stereo and connects to it using standard consumer electronics cables. Then it connects to your home network by Wireless-G wireless networking, or if you prefer, it can be connected via standard 10/100 Ethernet cabling. The included software creates a virtual sound system in your PC, which sends the audio output of any application to the Music Bridge and the stereo system. Use your favorite media player to play your music, and listen in the comfort of the living room. Let the Linksys Wireless-G Music Bridge bring your digital music out into the living room for the whole family to enjoy.

General
Product TypeNetwork audio player
Width5.6 in
Depth3.8 in
Height5.1 in
Weight8.1 oz
Audio System
Sound Output ModeStereo
Connectors
Coaxial Digital OutputYes
Optical Digital OutputYes
Network Player
TypeNetwork audio player
FunctionalityDigital audio playback, Internet radio playback
ConnectivityWireless / wired
Connectivity ProtocolsIEEE 802.11b (Wi-Fi), IEEE 802.11g, IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet)
Connections
Connector Type1 x network ( RJ-45 ) - rear 1 x SPDIF output ( TOSLINK ) - rear 1 x SPDIF output ( RCA phono ) - rear 1 x audio line-out ( RCA phono x 2 ) - rear 1 x headphones ( mini-phone stereo 3.5 mm ) - rear 1 x DC power input - rear
Miscellaneous
Included AccessoriesSoftware kit
Cables IncludedNetwork cable Audio cable
Power
Power DevicePower adapter - external
Manufacturer Warranty
Service & Support3 years warranty
Service & Support DetailsLimited warranty - 3 years
Universal Product Identifiers
BrandLinksys
Part NumberWMB54G
GTIN00745883568949

 

Tags

AVR-1610 ER-217 Minolta 2060 S280I EX-Z750 Trainer Game K-1020 Aficio 2027 Circulaire 617 TH6220D HS 8565 Recorder 5 1 SP230B DVP3980 12 Vista Mac PMC-DR45L Galeo 4600 Wixxl 86 MP620 SA-W3800 Linux KV-32CS71 Coolpix S550 SK-7 DS LE40B650t2P Mechwarrior 2 LS32A23W EWS1266 PPC-4100 Cooker Dongle DX7590 Support USR8004 GSX-1100F ZWC1300W LC-32D44E Keyboard GK1640TK Photosmart 7830 VM-3100 PRO AVH-P3100DVD Software RP5022 VGN-FJ270-B WA95U7 Laserjet 3050 HP-203 Runner 96350 Windows 7 Driver BLC1A Big Easy 568LM-lm568e-ct- TH-42PM50 Dopod C800 HD4QE22SA LE32C630k1W 425 PN Only BC246T Classic EW527F Lexmark Z33 46B8000 SC-AK45 TY-SP42p8WK DMC-LC20 Windows 7 Explorer-2007 PRO 920 X5100 Alert 2 - H Legend VPL-CS21 CJ-V313W EMT0005 D23620 PDC 2070 Asko 7005 DL1100 6580 Spcd EH2511 MC707VM-W Digital Data Silhouette 2000 LE19A650a1 Screwdriver NV-FJ625AM Professionnel 2521 GR-DVP7E FS-1900 GR-20 Mission CQ-C1303NE XP7230 Seiko 5D44 TR-606 ENA 7 Setup VX724 D-NE715 D900I EX525ST KX-TG1311FR

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101