Reviews & Opinions
Independent and trusted. Read before buy Onkyo HT-R667!

Onkyo HT-R667

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Onkyo HT-R667, size: 3.8 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Onkyo HT-R667About Onkyo HT-R667
Here you can find all about Onkyo HT-R667 like firmware and other informations. For example: review, hdmi problems, specs.

Onkyo HT-R667 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Onkyo HT-R667 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Onkyo HT-R667 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 3. Page 1 of 1. Average Rating:
peawet08 4:27am on Wednesday, September 8th, 2010 
I replaced the speakers with some decent Polk ones and considered the Onkyo speaker "system" a total loss for this purchase tuner has a ton of flexib...
changeit 8:11am on Tuesday, July 6th, 2010 
I decided to replace a component receiver with this product and am quite happy with it after 2 days. Solid sound. Easy setup. This unit replaces a 12 year old Onkyo unit so most of my speaker locations were already wired. I removed the old speakers.
dozzi20 2:23pm on Saturday, March 20th, 2010 
Got this on sale $499 and free shipping, if you see this for that price and are thinking about getting one dont let this pass and get a cheaper model.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

HT-S6100_US_NPR.qxd

08.5.23 0:18 PM

Page 1

HT-S6100
7.1-Channel Home Entertainment Receiver/Speaker Package (with Dock for the iPod)
Stamping the Onkyo Trademark on High-Def Entertainment with Superior A/V Processing and iPod Connectivity
The launch of the HT-S6100 marks another milestone for Onkyo: the companys first receiver/speaker package to simultaneously handle 1080p video and bit-for-bit audio processing.The HT-S6100 anchors your home theater by integrating the full potential of high-definition media (think Blu-ray Disc) and high-definition displays.With an HDMI platform as good as it gets (integrating up to four sources), you have every reason to be impressed. But the HT-S6100 is also going to take analog sources (from component video, S-video and composite video) and upscale them to HD-friendly 1080i resolution for HDMI output. Featuring some valuable optionssingle-cable dock connectivity for iPod, Audyssey room acoustic correction technologies, and integrated control with other leading brand-name devicesthis receiver/speaker package puts the emphasis on value for money.
HT -R667 7.1-Channel A/V Surround Home

Theater Receiver

130 Watts per Channel Minimum into 8 ohms, 1 kHz, 1 Channel Driven HDMI Audio and Video Processing (4 Inputs and 1 Output) HDMI to Support 1080p Video, Deep Color, x.v. Color, LipSync, Dolby TrueHD, DTS-HD Master Audio, DVD-Audio, Super Audio CD Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio, DTS-HD High-Resolution Audio Decoding HDMI Video Upscaling to 1080i* via Faroudja DCDi Edge (Directional Correlational Deinterlacing) Technology RIHD (Remote Interactive over HDMI) for System Control HDTV-Capable Component Video Switching (2 Inputs and 1 Output) 4 Digital Inputs (2 Optical, 2 Coaxial) 3 S-Video Inputs and 2 Outputs 4 Composite Video Inputs and 2 Outputs 4 A/V Inputs and 1 Output 2 Audio Inputs and 1 Output Audyssey 2EQ to Correct Room Acoustic Problems and to Calibrate Speakers Audyssey Dynamic EQ for Loudness Correction H.C.P.S. (High Current Power Supply) Massive High Power Transformer WRAT (Wide Range Amplifier Technology) 192 kHz/24-Bit DACs for All Channels Advanced 32-Bit Processing DSP Chip Subwoofer Pre Out CinemaFILTER A-Form Listening Mode Memory
Optimum Gain Volume Circuitry Music Optimizer for Compressed Music Files Theater Dimensional Virtual Surround Function Double Bass Function Color-Coded 7.1-Multichannel Inputs Speaker A/B Drive Banana Plug-Compatible Speaker Posts (Except Speaker B) Crossover Adjustment at 40/50/60/80/100/120/150/ 200 Hz for Bass Management A/V Synchronization Function (Up to 100 ms in 20 ms Steps) 40 FM/AM Radio Presets RI (Remote Interactive) Terminal Front Panel Auxiliary Input (for Camcorders, Game Consoles, etc.) Newly Designed GUI for System Set-up Newly Designed Preprogrammed RI (Remote Interactive) Remote Control with Mode-Key LEDs
*From component video, S-Video and composite video inputs
HTP-750X 7.1-Channel Home Theater
Speaker System SKF-750XF 2-Way Acoustic-Suspension Front Speakers
3 1/8 (8 cm) Cone Woofer x (2.5 cm) Balanced-Dome Tweeter Max. Input Power: 110 W Magnetically Shielded
SKC-750XC 2-Way Acoustic-Suspension Center Speaker
3 1/8 (8 cm) Cone Woofer x (2.5 cm) Balanced-Dome Tweeter Base for Horizontal Mounting Max. Input Power: 110 W Magnetically Shielded
SKM-750XS 2-Way Acoustic-Suspension Surround Speakers
3 1/8 (8 cm) Cone Woofer 1 (2.5 cm) Balanced-Dome Tweeter Max. Input Power: 110 W Magnetically Shielded

DS-A1L Dock for the iPod

Recharges iPod Superior Quality for Digital Music Files Control with Onkyo Remote Control

*Audio playback only

SKB-750X 2-Way Acoustic-Suspension Surround Back Speakers
SKW-750X Bass Reflex Powered Subwoofer
10 (25 cm) Cone Max. Power: 290 W Down-firing

Page 2

RIHD (Remote Interactive over HDMI) for System Control*1
The HT-S6100 offers integrated system control with certain HDMI-compatible high-definition displays, DVD and hard-disk recorders, and Blu-ray Disc players. With one remote control, you can control certain functions, including Standby,Volume and Direct Change.The system can seamlessly integrate with other leading brand-name devices, including those with Panasonic VIERA Link*2 and Toshiba CE-Link capability, as well as selected Sharp displays.

*1 Compatibility depends on model. *2 Panasonic VIERA Link is the new name for EZ Sync.
Dimensions (W x H x D) 17 1/8 x 5 7/8 x 14 15/16 (435 x 150 x 379.5 mm) Weight 22 lbs. (10 kg)
Processing 1080p Video and High-Def Surround Sound via HDMI
The HT-S6100 uses HDMI as the conduit for highdefinition content, such as 1080p video from Blu-ray Disc.You can connect up to four components via HDMI, and compatible video sources can be received and switched for a pure digital connection to an HDTV. Also, all multichannel audiofrom bit-for-bit streams to standard Dolby Digitalis digitally transported via HDMI for processing.

s SPEAKER SECTION

Speaker Type Front/Center/Surround/ Surround Back 2-way acoustic-suspension Subwoofer Bass reflex Drivers Front 3 1/8 (8 cm) cone woofer x 2, 1 (2.5 cm) balanced-dome tweeter Center 3 1/8 (8 cm) cone woofer x 2, 1 (2.5 cm) balanced-dome tweeter Surround 3 1/8 (8 cm) cone woofer, 1 (2.5 cm) balanced-dome tweeter Surround Back 3 1/8 (8 cm) cone woofer, 1 (2.5 cm) balanced-dome tweeter Subwoofer 10 (25 cm) cone Frequency Response Front/Center/Surround/ Surround Back 60 Hz50 kHz Subwoofer 25 Hz150 Hz Output Sound Pressure Level Front/Center 79 dB/W/m Surround/ Surround Back 76 dB/W/m Max. Input Power Front/Center/Surround/ Surround Back 110 W Max. Output Power Subwoofer 290 W Nominal Impedance Front/Center/Surround/ Surround Back 8 ohms Input Impedance Subwoofer 140 mV/20 k-ohms
The Full Range of Next-Generation, High-Definition Surround-Sound Codecs
The HT-S6100 handles the lossless decoding technologiesDolby TrueHD and DTS-HD Master Audio, both supported by Blu-ray Discto enable a lossless, bit-for-bit soundtrack that is identical to the studio master.This package also handles two lossy technologies: Dolby Digital Plus and DTS-HD High Resolution Audio.

SPECIFICATIONS

s RECEIVER SECTION

AMPLIFIER SECTION

Power Output Front L/R, Center, Surround L/R, Surround Back L/R
HDMI Video Upscaling (to 1080i) via Faroudja DCDi Edge (Directional Correlational Deinterlacing) Technology
The onboard Faroudja DCDi Edge video processor enables upscaling of all standard-definition video (from component video, S-Video and composite video inputs) for 1080i output via HDMI. Upscaling to 1080i gives you a resolution that is compatible with the best highdefinition displays. Compared to low-quality video processors, DCDi Edge can skillfully remove artifacts during the deinterlacing process.

Audio Playback from Your iPod with the Included DS-A1L Dock
The ubiquitous iPod has revolutionized how we listen to and store our music.The HT-S6100 is the perfect platform for integrating virtually any iPod for audio playback. When connected to the Dock, your iPod can be controlled with the systems remote control.The Dock also recharges your iPod.
130 watts per channel minimum into 8 ohms, 1 kHz, 1 channel driven 210 W (3 ohms, 1 ch) 190 W (4 ohms, 1 ch) 130 W (8 ohms, 1 ch) THD (Total Harmonic Distortion) 0.08% (1 kHz, 1 W) Damping Factor 60 (Front, 1 kHz, 8 ohms) Input Sensitivity and Impedance 200 mV/47 k-ohms (Line) Output Level and Impedance 200 mV/2.2 k-ohms (Rec out) Frequency Response 5 Hz100 kHz/+1 dB, -3 dB (Direct mode) Tone Control 10 dB, 50 Hz (Bass) 10 dB, 20 kHz (Treble) Signal-to-Noise Ratio 100 dB (Line, IHF-A) Speaker Impedance 8 ohms16 ohms Dynamic Power

GENERAL

Dimensions (W x H x D) Front/Surround/ Surround Back 5 1/2 x 14 x 3 11/16 (140 x 355 x 93 mm) Center 14 x 5 1/2 x 3 11/16 (355 x 140 x 93 mm) Subwoofer 10 13/16 x 19 5/16 x 16 3/16 (275 x 507 x 411 mm) Weight Front/Center 4.0 lbs. (1.8 kg) Surround 2.9 lbs. (1.3 kg) Surround Back 2.9 lbs. (1.3 kg) Subwoofer 25.6 lbs. (11.6 kg)

VIDEO SECTION

Input Sensitivity/Output Level and Impedance Video 1.0 Vp-p/75 ohms (Component and S-Video Y) 0.7 Vp-p/75 ohms (Component PB/CB,PR/CR) 0.28 Vp-p/75 ohms (S-Video C) 1.0 Vp-p/75 ohms (Composite) Component Video Frequency Response 5 Hz50 MHz, -3 dB
Correcting Room Distortion and Loudness with Audyssey 2EQ and Audyssey Dynamic EQ
The HT-S6100 uses Audyssey 2EQ to counter distortion created by walls, furniture, and other objects. This technology detects speaker distance, and then sets levels, delays, and crossovers, while also measuring room acoustics. Compared to one-position room correction systems, Audyssey 2EQ covers a much wider listening area. Moreover, it corrects problems in both frequency response and time domain (where most of the problems lie) across the entire listening area.The results are immediately obviousa clear, well-balanced and natural sound. After 2EQ calibration, Audyssey Dynamic EQ solves the problem of deteriorating sound quality at lower volumes.The professionals who create music and movies do so at reference levels much louder than typical home listening levels. When volume is reduced on a standard home theater receiver, the bass disappears, voices change, and the surround soundstage becomes less enveloping. As volume is adjusted on the HT-S6100, however, Dynamic EQ selects the best possible frequency response and surround levels moment-by-moment, resulting in an ideal listening experience at any volume level.

s Dock for the iPod

Dimensions (W x H x D) 4 13/32 x 2 3/8 x 4 13/32 (112 x 60 x 112 mm) Weight 0.5 lbs. (220 g)

TUNER SECTION

Tuning Frequency Range FM 87.5 MHz107.9 MHz AM 530 kHz1,710 kHz FM/AM Preset Memory 40 stations

s CARTON

Dimensions (W x H x D) 22 3/8 x 37 13/16 x 20 3/16 (569 x 961 x 512 mm) Weight 83.8 lbs. (38.0 kg)
Power Supply Power Consumption AC 120 V, 60 Hz 4.6 A

s UPC CODE

(B) 751398008542

HT-R667

Due to a policy of continuous product improvement, Onkyo reserves the right to change specifications and appearance without notice. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. DTS is a registered trademark and the DTS logos and Symbol are trademarks of DTS, Inc. Manufactured under license from Audyssey Laboratories. U.S. and foreign patents pending. 2EQ and Dynamic EQ are trademarks of Audyssey Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Faroudja DCDi Edge is a registered trademark of Genesis Microchip Inc. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. x.v. Color is a trademark of Sony Corporation. WRAT, CinemaFILTER, and Theater Dimensional are trademarks of Onkyo Corporation. All other trademarks and registered trademarks are the property of their respective holders. Onkyo Corporation 2-1 Nisshin-cho, Neyagawa-shi, Osaka 572-8540, JAPAN Tel: +81-72-831-8136 Fax: +81-72-833-5222 http://www.onkyo.com/ Onkyo U.S.A. Corporation 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: +1-201-785-2600 Fax: +1-201-785-2650 http://www.onkyousa.com/ Mexico: Representaciones de Audio, S.A. de C.V. Calle 10 No. 133 Col. Granjas San Antonio Del. Iztapalapa C.P. 09070 Mexico, D.F. MEXICO Tel: +525-55-697-9754 Fax: +525-55-582-5944 Brazil: DISAC COMERCIAL LTDA Av.Brig. Faria Lima, No 1.461-Torre SUL-cj 151-154 Sao Paulo-SP-Brazil CEP 01452-002 Tel: +55-11-3811-7272 Fax: +55-11-3811-7265 http://www.disac.com.br

NPR No. 08N32 05/08

doc1

*While speaker set B is on, speaker set A is reduced to 5.1-channel playback.
Speaker set B can be used in another room and offers 2-channel stereo playback.
*Only analog input sources are output by speaker set B.

MASTER VOLUME

ON/STANDBY

TUNING A SPEAKERS

PRESET B

STANDBY

DOCK MULTI CH DVD VCR/DVR CBL/SAT AUX TAPE TUNER CD

SETUP RETURN

AUX INPUT

PHONES

SETUP MIC

A SPEAKERS B

MOVIE/TV

DISPLAY DIGITAL INPUT

DIMMER

MEMORY TUNING MODE

LISTENING MODE

AV RECEIVER

Speaker set A On

Speaker set B On Off

Indicator
Output Set A: 5.1 channels Set B: 2 channels Set A: 7.1 channels Set B: 2 channels No sound

On Off

Main Room (speaker set A)
Center speaker Front left speaker Subwoofer Front right speaker

Sub Room (speaker set B)

Surround left speaker Surround back left speaker Surround back right speaker

Surround right speaker

* While speaker set B is on, the surround back speakers output no sound.
* Digital input sources are not output by speaker set B. Connect your source component with an analog connection.

Features

Amplier
130 Watts/Channel @ 8 ohms (FTC) WRAT-Wide Range Amplier Technology (5Hz100kHz bandwidth) Optimum Gain Volume Circuitry
SKF-750XF L/R 2-Way Front Speakers SKC-750XC Center Speaker 3-1/8 inch cone woofer inch Balanced dome tweeter Max. input power:110 W Magnetically shielded 8-ohm impedance Color-coded speaker terminals and speaker cable SKM-750XS L/R Full-Range Surround Speakers SKB-750X L/R Full-Range Surround Back Speakers 3-1/8 inch full-range speaker Max. input power:110 W 8-ohm impedance Color-coded speaker terminals and speaker cable SKW-750X Bass Reex Powered Subwoofer 10 inch cone woofer Max. power:290 W

Processing

HDMI Video Upscaling (Up to 1080i) HDMI Video Upconversion Dolby TrueHD*1 DTS-HD Master Audio*2 Faroudja DCDi Edge Enhancement Direct Mode Music Optimizer*3 for Compressed Music CinemaFILTER Non-Scaling Conguration A-Form Listening Mode Memory 24-bit/192kHz D/A Converters Powerful and Highly Accurate 32-bit DSP Processing

Connections

4 HDMI*4 Inputs and 1 Output Onkyo RIHD*5 for System Control HDTV-Ready Component Video Switching (2 Inputs/ 1 Output) 4 Digital Inputs (2 Optical/2 Coaxial/4 Assignable) 3 S-Video Inputs/2 Outputs Color-Coded 7.1 Multichannel Inputs Subwoofer Pre Outs Dedicated DOCK jack for quick and simple DS-A1L Dock connection and iPod playback

C MULTI CH button (50)

Selects the multichannel DVD input.

D SP A/B button (50)

Used to turn speaker set A or B on or off.
E Arrow [ ]/[ ]/[ ]/[ ] and ENTER buttons
Used to select and adjust settings.

Used to change settings.

G LISTENING MODE buttons (59)
Used to select the listening modes.

RECEIVER

H DIMMER button (51)
Adjusts the display brightness.

I DISPLAY button (52)

Displays information about the current input source.

J MUTING button (51)

Mutes or unmutes the AV receiver.
K VOL [ ]/[ ] button (50)
Adjusts the volume of the AV receiver regardless of the currently selected remote controller mode.

L RETURN button

Returns to the previous display when changing settings.

M AUDIO button (71)

Used to change audio settings. When the Audio TV Out setting is set to On (page 82), this button is disabled.

N SLEEP button (51)

Used with the Sleep function. Controlling the tuner To control the AV receivers tuner, press the [TUNER] (or [RECEIVER]) REMOTE MODE button. You can select AM or FM by pressing the [TUNER] button repeatedly.
1 Arrow [ ]/[ ]/[ ]/[ ] buttons
Used to tune into radio stations and select preset.

2 Number buttons (55)

Used to select AM and FM radio stations and preset stations directly.

3 D.TUN button (55)

Selects the Direct tuning mode. For detailed information, see the pages in parentheses.

4 DISPLAY button(55)

Displays information about the band, frequency, preset number, and so on.

5 CH +/ button (56)

Selects radio presets. Note: An Onkyo cassette recorder connected via also be controlled in Receiver (see page 90). can
B REMOTE MODE/INPUT SELECTOR buttons
(19, 50, 8691) Selects the remote controller modes and the input sources.
Controlling a Dock DS-A1L
To control your iPod when its seated in the supplied DS-A1L Dock, which is connected to the HT-R667s DOCK jack, press the [DOCK] REMOTE MODE button. See page 37 for details on connecting the DS-A1L Dock. To control an RI Dock other than the DS-A1L, see Controlling Other Components on page 84.

C Previous [

] button Restarts the current song. Press it twice to select the previous song.

D Rewind [

] button Press and hold to rewind. Pauses playback.
E Pause [ ] button F REPEAT button

9 J K L

Used with the repeat function.

G DISPLAY button

Turns on the backlight for 30 seconds.

H MUTING button (51)

I ALBUM +/ button
Selects the next or previous album.
J VOL [ ]/[ ] button (50)
Adjusts the volume of the AV receiver.

K MENU button

Displays a menu.

2 M N O P Q R

L PLAYLIST [ ]/[ ] buttons
Selects the previous or next playlist on the iPod.

M Play [ ] button

Starts playback. If the component is off, it will turn on automatically.

N Next [

] button Selects the next song. ] button Press and hold to fast forward.

O Fast Forward [

P Stop [ ] button
Stops playback and displays a menu.
* With some components, certain buttons may not work as expected, and some may not work at all.

Q PLAY MODE button

Selects play modes on components with selectable play modes.

A ON/STANDBY button

Turns the iPod on or off. Notes: Your iPod may not respond the rst time you press this button, in which case you should press it again. This is because the remote controller transmits the On and Standby commands alternately, so if your iPod is already on, it will remain on when the remote controller transmits an On command. Similarly, if your iPod is already off, it will remain off when the remote controller transmits an Off command.

R RANDOM button

Used with the shufe function.
B Arrow [ ]/[ ] and ENTER buttons
Used to navigate menus and select items.

Connecting Your Speakers

Enjoying Home Theater
Thanks to the AV receivers superb capabilities, you can enjoy surround sound with a real sense of movement in your own homejust like being in a movie theater or concert hall. You can enjoy DVDs featuring Dolby Digital or DTS. With analog or digital TV, you can enjoy Dolby Pro Logic IIx, DTS Neo:6, or Onkyos original DSP listening modes.
Front left and right speakers (SKF-750XF) These output the main sound. Their role in a home theater is to provide a solid anchor for the sound image. They should be positioned facing the listener at about ear level, and equally spaced from the TV. Angle them inward slightly so as to create a triangle, with the listener at the apex. Surround left and right speakers (SKM-750XS) These speakers are used for precise sound positioning and to add realistic ambience. Position them at the sides of the listener, or slightly behind, about 23 feet (60100 cm) above ear level. Ideally they should be equally spaced from the listener.
Center speaker (SKC-750XC) This speaker enhances the front left and right speakers, making sound movements distinct and providing a full sound image. For movies its used mainly for dialog. Position it close to your TV (preferably on top) facing forward at about ear level, or at the same height as the front left and right speakers.

Subwoofer (SKW-750X) The subwoofer handles the bass sounds of the LFE (Low-Frequency Effects) channel. The volume and quality of the bass output from your subwoofer will depend on its position, the shape of your listening room, and your listening position. In general, a good bass sound can be obtained by installing the subwoofer in a front corner, or at one-third the way along the front wall, as shown. Tip: To nd the best position for your subwoofer, while playing a movie or some music with good bass, experiment by placing your subwoofer at various positions within the room and choose the one that provides the most satisfying results.
Surround back left and right speakers (SKB-750X) These speakers are necessary to enjoy Dolby Digital EX, DTS-ES Matrix, DTS-ES Discrete, etc. They enhance the realism of surround sound and improve sound localization behind the listener. Position them behind the listener about 23 feet (60100 cm) above ear level.

Corner position

1/3 of wall position
Connecting Your SpeakersContinued

Speaker Conguration

For 7.1-channel surround-sound playback, you need seven speakers and a powered subwoofer. The following table shows which channels you should use based on the number of speakers you have.
Number of speakers: Front left Front right Center Surround left Surround right Surround back* Surround back left Surround back right 2 3 4 5 6 7
Speaker Connection Precautions
Read the following before connecting your speakers: You can connect speakers with an impedance of between 8 and 16 ohms. If you use speakers with a lower impedance, and use the amplier at high volume levels for a long period of time, the built-in amp protection circuit may be activated. Disconnect the power cord from the wall outlet before making any connections. Read the instructions supplied with your speakers. Pay close attention to speaker wiring polarity. Connect positive (+) terminals to only positive (+) terminals, and negative () terminals to only negative () terminals. If you get them the wrong way around, the sound will be out of phase and will sound unnatural. Unnecessarily long or very thin speaker cables may affect the sound quality and should be avoided. Be careful not to short the positive and negative wires. Doing so may damage the AV receiver. Dont connect more than one cable to each speaker terminal. Doing so may damage the AV receiver. Dont connect a speaker to several terminals.

Connection A B a

AV receiver VCR/DVR OUT S VCR/DVR OUT V VCR/DVR OUT L/R
VCR or DVD recorder S-Video input Composite video input Audio L/R input
Picture quality Better Standard

L AUDIO IN

VCR or DVR
Notes: The AV receiver must be turned on for recording. Recording is not possible while its on Standby. If you want to record directly from your TV or another video source without going through the AV receiver, connect the audio and video outputs from your TV or other video component directly to the recording VCR/DVRs audio and video inputs. See the manuals supplied with your TV or VCR/DVR for details. Video signals connected to composite video inputs can only be recorded via the VCR/DVR OUT V jack. So if your source TV or VCR is connected to a composite video input, the recording VCR/DVR must be connected to the VCR/DVR OUT V jack. Likewise, video signals connected to S-Video inputs can only be recorded via the VCR/DVR OUT S jack. So if your source TV or VCR is connected to an S-Video input, the recording VCR/DVR must be connected to the VCR/DVR OUT S jack.
Connecting a Satellite, Cable, or Terrestrial Set-top box or Other Video Source
Hint! With this hookup, you can use your satellite or cable receiver to listen to your favorite TV programs via the AV receiver, which is useful if your TV has no audio outputs.
Step 1: Video Connection Choose a video connection that matches the video source ( A , B , or C ), and then make the connection. You must connect the AV receiver to your TV with the same type of connection. Step 2: Audio Connection Choose an audio connection that matches the video source ( a , b , or c ), and then make the connection. To enjoy Dolby Digital and DTS, use connection b or c.
Connection A B C a b c AV receiver COMPONENT VIDEO IN 2 CBL/SAT IN S CBL/SAT IN V CBL/SAT IN L/R DIGITAL IN COAXIAL 2 DIGITAL IN OPTICAL 1 Signal ow Video source Component video output S-Video output Composite video output Analog audio L/R output Digital coaxial output Digital optical output Picture quality Best Better Standard

ZONE 2 LINE OUT PRE OU

Satellite, cable, set-top box, etc.
Connecting Components with HDMI

About HDMI

Designed to meet the increased demands of digital TV, HDMI (High Denition Multimedia Interface) is a new digital interface standard for connecting TVs, projectors, DVD players, set-top boxes, and other video components. Until now, several separate video and audio cables have been required to connect AV components. With HDMI, a single cable can carry control signals, digital video, and up to eight channels of digital audio (2-channel PCM, multichannel digital audio, or multichannel PCM). The HDMI video stream (i.e., video signal) is compatible with DVI (Digital Visual Interface),*1 so TVs and displays with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (This may not work with some TVs and displays, resulting in no picture.) The AV receiver uses HDCP (High-bandwidth Digital Content Protection), so only HDCP-compatible components will display a picture. The AV receivers HDMI interface is based on the following standard: Repeater System, Deep Color, Lip Sync, DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD, Dolby Digital Plus, SA-CD and Multichannel PCM

Neo:6 Cinema

Suitable for classical or operatic music, this mode emphasizes the surround channels in order to widen the stereo image and simulates the natural reverberation of a large hall.

Unplugged

Use this mode with any stereo movie (e.g., TV, DVD, VHS).

Neo:6 Music

Suitable for acoustic instruments, vocals, and jazz, this mode emphasizes the front stereo image, giving the impression of being right in front of the stage.

Studio-Mix

Use this mode with any stereo music source (e.g., CD, radio, cassette, TV, VHS, DVD).
5.1-channel source + Neo:6
Suitable for rock or pop music, listening to music in this mode creates a lively sound eld with a powerful acoustic image, like being at a club or rock concert.

TV Logic

This mode uses Neo:6 to expand 5.1-channel sources for 6.1/7.1-channel playback.
DTS-HD High Resolution Audio
This mode adds realistic acoustics to TV shows produced in a TV studio, surround effects to the entire sound, and clarity to voices.

All Ch Stereo

Developed for use with HDTV, including the new video disc formats Blu-ray and HD DVD, this is the latest multichannel audio format from DTS. It supports up to 7.1 channels with 96 kHz sampling rate.

DTS-HD Master Audio

Ideal for background music, this mode lls the entire listening area with stereo sound from the front, surround, and surround back speakers.

Full Mono

Designed to take full advantage of the additional storage space offered by the new Blu-ray and HD DVD disc formats, this new DTS format offers up to 7.1 discrete channels of digital audio with 48/96 kHz, up to 5.1-channels with 192 kHz sampling rate. For the signals supported by the AV receiver, see page 64.

DTS Express

In this mode, all speakers output the same sound in mono, so the sound you hear is the same regardless of where you are within the listening room.
T-D (Theater-Dimensional) or
This format supports up to 5.1 channels and a lower sampling rate of 48 kHz. Applications include interactive audio and commentary encoding for HD DVD Sub Audio and Blu-ray Secondary Audio. Also broadcast and media servers.
With this mode you can enjoy a virtual 5.1 surround sound even with only two or three speakers. This works by controlling how sounds reach the listeners left and right ears. Good results may not be possible if theres too much reverb, so we recommend that you use this mode in an environment with little or no natural reverb.

Recording

This section explains how to record the input source and how to record audio and video from separate sources. Notes: The surround sound and DSP listening modes cannot be recorded. Copy-protected DVDs cannot be recorded. Sources connected to the multichannel DVD input cannot be recorded. Sources connected to a digital input cannot be recorded. Only analog inputs can be recorded. DTS signals will be recorded as noise, so dont attempt analog recording of DTS CDs or LDs.

Press the [RECEIVER] REMOTE MODE button, followed by the [SETUP] button.
Repeat step 5 so that the level of the test tone coming from each speaker is the same. Speakers that you set to No or None in the Speaker Conguration (page 74) do not output the test tone. Press the [SETUP] button. Setup closes. Dont forget to turn down the volume if you turned it up while setting the levels.
Note: The speaker levels cannot be adjusted while a pair of headphones is connected or the AV receiver is muted. While speaker set B is on, you can adjust the volume of the left and right speakers, from 12 dB to +12 dB. While speaker set B is on, you cannot adjust the levels of speaker set As surround back speakers.

Equalizer Settings

These settings are set automatically by the Automatic Speaker Setup function (see page 42). Here you can adjust the tone of individual speakers. To set the volume of individual speakers, see page 77.
Press the Down [ ] button, and then use the Left and Right [ ]/[ ] buttons to select a speaker.
25. Equalizer Settings Equalizer Channel 63Hz 250Hz 1000Hz 4000Hz 16000Hz Manual Front 0dB 0dB 0dB 0dB 0dB
Use the Up and Down [ ]/[ ] buttons to select a frequency. Use the Left and Right [ ]/[ ] buttons to adjust the level at that frequency. The volume at each frequency can be adjusted from 6 to +6 dB in 1 dB steps. Tip: Low frequencies (e.g., 63Hz) affect bass sounds; high frequencies (e.g., 16000Hz) affect treble sounds.
Use the Up and Down [ ]/[ ] buttons to select 4. Equalizer Settings, and then press [ENTER].
Use the Up [ ] button to select Channel, and then use the Left and Right [ ]/[ ] buttons to select another speaker. Repeat steps 5 and 6 for each speaker. Speakers that youve set to No or None in the Speaker Conguration (page 74) cannot be selected.
Use the Left and Right [ ]/[ ] buttons to select: Off: Tone off, response at. Audyssey: The tone for each speaker is set automatically by the Automatic Speaker Setup function. Be sure to select this setting after having performed the Automatic Speaker Setup. Manual: You can adjust the equalizer for each speaker manually. If you selected Manual, continue with this procedure. If you selected Off or Audyssey, go to step 8.
Press the [SETUP] button. The setup menu closes.
Notes: The front, center, surround, and surround back speakers can be adjusted at 80Hz, 250Hz, 800Hz, 2500Hz, and 8000Hz. The subwoofer can be adjusted at 40Hz, 80Hz, and 160Hz. While the Direct listening mode is selected, the equalizer settings have no effect. This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.

Output Resolution You can specify the output resolution for the HDMI outputs and have the AV receiver upconvert the picture resolution as necessary to match the resolution supported by your TV. See the Video Resolution Chart on page 98 to see how the AV receiver handles video input at different resolutions. Through: Select this to pass video through the AV receiver at the same resolution and with no conversion. Auto: Select this to have the AV receiver automatically convert video at resolutions not supported by your TV. 480p (480p/576p): Select this for 480p or 576p output and video conversion as necessary. 720p: Select this for 720p output and video conversion as necessary. 1080i: Select this for 1080i output and video conversion as necessary. Zoom Mode This setting determines the aspect ratio that will be used for 480i, 480p, 576i, and 576p input signals when they are output by the HDMI OUT. This setting only applies when the HDMI Output Resolution setting is set to 1080i or 720p. Normal: Audio TV Out This setting determines whether audio received by an HDMI input is output by the HDMI outputs. You may want to change this setting to On if your TV is connected to an HDMI output and you want to listen to audio from an HDMI component through your TVs speakers. Normally, it should be set to Off. Off: HDMI audio is not output (default). On: HDMI audio is output. Notes: If On is selected and the signal can be output by the TV, the AV receiver will output no sound through its speakers. When TV Control is enabled, this setting is set to Auto. With some TVs and input signals, no sound may be output even if On is selected. When the Audio TV Out setting is set to On, or TV Control is set to Enable and youre listening through your TVs speakers (see page 36), if you turn up the AV receivers volume control, the sound will be output by the AV receivers speakers. To stop the AV receivers speakers producing sound, change the settings, change your TVs settings, or turn down the AV receivers volume. Lip Sync The Lip Sync function can automatically synchronize HDMI audio and video thats gotten out of sync due to the complex digital video processing being performed by your HDMI-compatible TV. With HDMI Lip Sync, the audio delay required to synchronize the audio and video is calculated and applied automatically by the AV receiver. Disable: HDMI lip sync disabled. Enable: HDMI lip sync enabled. Notes: This function works only if your HDMI-compatible TV supports HDMI Lip Sync. You can check the amount of delay being applied by the HDMI Lip Sync function on the A/V Sync screen (see page 79). Full: x.v.Color If your HDMI source and HDMI-compatible TV both support the x.v.Color, you can enable x.v.Color on the AV receiver with this setting. Disable: x.v.Color disabled. Enable: x.v.Color enabled. Control This function allows RIHD-compatible components connected via HDMI to be controlled with the AV receiver. Disable: RIHD disabled. Enable: RIHD enabled.

Notes: The remote control codes provided are correct at the time of printing but subject to change. Only RI Docks with a remote control sensor, such as the DS-A2 and DS-A2X, can be controlled with the AV receivers remote controller and the appropriate remote control code.
Controlling Other ComponentsContinued
Remote Control Codes for Onkyo Components Connected via
Onkyo components that are connected via are controlled by pointing the remote controller at the AV receiver, not the component. This allows you to control components that are out of view, in a rack, for example.
Resetting the REMOTE MODE Buttons
You can reset a REMOTE MODE button to its default remote control code.
Make sure the Onkyo component is connected with an cable and an analog audio cable (RCA). See page 40 for details. Enter the appropriate remote control code to the REMOTE MODE button. [DVD] REMOTE MODE button 31612: Onkyo DVD player with [CD] REMOTE MODE button 71327: Onkyo CD player with [TAPE] REMOTE MODE button 42157: Onkyo cassette recorder with (default) See the previous page for how to enter remote control codes.
While holding down the REMOTE MODE button that you want to reset, press and hold down the [AUDIO] button until the Remote indicator lights up (about 3 seconds).
Press the REMOTE MODE button, point the remote controller at the AV receiver, and operate the component.
Within 30 seconds, press the REMOTE MODE button again. The Remote indicator ashes twice, indicating that the button has been reset. Each of the REMOTE MODE buttons is preprogrammed with a remote control code. When a button is reset, its preprogrammed code is restored.
If you want to control an Onkyo component by pointing the remote controller directly at it, or you want to control an Onkyo component thats not connected via , use the following remote control codes: [DVD] REMOTE MODE button 30627: Onkyo DVD player without [CD] REMOTE MODE button 71817: Onkyo CD player without (default) (default)
Resetting the Remote Controller
You can reset the remote controller to its default settings.
While holding down the [RECEIVER] REMOTE MODE button, press and hold down the [AUDIO] button until the Remote indicator lights up (about 3 seconds).
Within 30 seconds, press the [RECEIVER] REMOTE MODE button again. The Remote indicator ashes twice, indicating that the remote controller has been reset.
Controlling a DVD Player, or DVD Recorder
By pressing the REMOTE MODE button thats been programmed with the remote control code for your DVD player (HD DVD, Blu-ray, or TV/DVD combination), you can control your player with the following buttons. The [DVD] REMOTE MODE button is preprogrammed with the remote control code for controlling an Onkyo DVD player. For details on entering a remote control code for a different component, see page 84.

Press [TV] REMOTE MODE button rst
A ON/STANDBY, TV [ B TV VOL [ ]/[ ]*
] buttons Set the TV to On or Standby. Adjust the TVs volume.

C TV [INPUT]* button

Selects the TVs external inputs.

D GUIDE button

Displays the program guide.

G Playback buttons

From left to right: Previous, Rewind, Pause, Play, Stop, Fast Forward, and Next. These buttons works for use with TV/DVD and TV/VCR combination-type components.
H SEARCH, REPEAT, RANDOM, and PLAY

K A B C D E F N O L M

Enter numbers. [0] button enters 11 on some components. [+10] button works as -.-- button or +10.

K MUTING button

Mutes the TV.
Select channels on the TV.

M PREV CH button

Selects the previous or last channel.

N RETURN button

Exits the TVs setup menu.

O AUDIO button

P CLR button
Cancels functions and clears entered numbers, or enters 12. * The RIHD is Onkyos name for the CEC (Consumer Electronics Control) system, which is part of the HDMI specication.

Troubleshooting

If you have any trouble using the AV receiver, look for a solution in this section. If you cant resolve the issue yourself, contact your Onkyo dealer. If you cant resolve the issue yourself, try resetting the AV receiver before contacting your Onkyo dealer.
To reset the AV receiver to its factory defaults, turn it on and, while holding down the [VCR/DVR] button, press the [ON/STANDBY] button. Clear will appear on the display and the AV receiver will enter Standby mode.
Note that resetting the AV receiver will delete your radio presets and custom settings.
Cant turn on the AV receiver Make sure that the power cord is plugged into the wall outlet properly. Unplug the power cord from the wall outlet, wait 5 seconds or more, then plug it back in again. The AV receiver turns off as soon as its turned on The amp protection circuit has been activated. Remove the power cord from the wall outlet immediately. Disconnect all speaker cables and input sources, and leave the AV receiver with its power cord disconnected for 1 hour. After that, reconnect the power cord and set the volume to maximum. If the AV receiver stays on, set the volume to minimum, disconnect the power cord, and reconnect your speakers and input sources. If the AV receiver turns off when you set the volume to maximum, disconnect the power cord, and contact your Onkyo dealer.
Make sure that speaker A or B is on (page 7). Make sure that all audio connecting plugs are pushed in all the way (page 26). Make sure that the polarity of the speaker cables is correct, and that the bare wire is in contact with the metal part of each speaker terminal (page 21). Make sure that the speaker cables are not shorting. Check the volume (page 50). The AV receiver is designed for home theater enjoyment and has a wide volume range for precise adjustment. If the MUTING indicator is ashing on the display, press the remote controllers [MUTING] button to unmute the AV receiver (page 51). While a pair of headphones is connected to the PHONES jack, no sound is output by the speaker set A and B (page 52). Check the digital audio output settings on the source component. On some game consoles, such as those that can play DVDs, the default setting is off. With some DVD-Video discs, you need to select an audio format from a menu or with the AUDIO button on your DVD players remote controller. If your turntable doesnt have a phono preamp built-in, you must connect one between it and the AV receiver. If your turntable uses an MC cartridge, you must connect an MC head amp, or an MC transformer and a phono preamp. Check the speaker settings (pages 7478). If the digital signal format is set to PCM or DTS, set it to Auto (page 53). If theres no sound from a DVD player connected to an HDMI IN, check the DVD players output settings, and be sure to select a compatible audio format. Only the front speakers produce sound When the Stereo or Mono listening mode is selected, only the front speakers and subwoofer produce sound. Check the Speaker Conguration (page 74). Only the center speaker produces sound If you use the Dolby Pro Logic IIx Movie or Dolby Pro Logic IIx Music listening mode with a mono source, such as an AM radio station or mono TV program, the sound will be concentrated in the center speaker. Check the Speaker Conguration (page 74). The center speaker produces no sound When the Stereo or Mono listening mode is selected, the center speaker produces no sound (page 66). Check the Speaker Conguration (page 74). The surround speakers produce no sound When the Stereo or Mono listening mode is selected, the surround speakers produce no sound. Depending on the source and the current listening mode, not much sound may be produced by the surround speakers. Try another listening mode (page 59). Check the Speaker Conguration (page 74).

Theres no picture Make sure that all video connecting plugs are pushed in all the way (page 26). Make sure that each video component is properly connected. On your TV, make sure that the video input to which the AV receiver is connected is selected. The AV receiver does not convert between formats, so if a video source component is connected to a component video input, your TV must be connected to the component video output (page 28). If the video source is connected to an HDMI input, your TV must be connected to the HDMI OUT (page 28). Theres no picture from a source connected to an HDMI IN Reliable operation with an HDMI-to-DVI adapter is not guaranteed. In addition, video signals from a PC are not supported (page 36). If the message Resolution Error appears on the AV receivers display, this indicates that your TV does not support the current video resolution and you need to select another resolution on your DVD player.
Reception is noisy, stereo FM reception suffers from hiss, or the FM STEREO indicator doesnt light up Relocate your antenna. Move the AV receiver away from your TV or computer. When listening to an AM station, operating the remote controller may cause noise. Passing cars and airplanes can cause interference. Concrete walls weaken radio signals. If nothing improves the reception, install an outdoor antenna. with the same name (e.g., TAPE IN to TAPE OUT or VCR/DVR IN to VCR/DVR OUT).

Others

The sound changes when I connect my headphones When a pair of headphones is connected, the listening mode is set to Stereo, unless its already set to Stereo, Mono, or Direct, in which case it stays the same. How do I change the language of a multiplex source On the Audio Adjust menu, change the Multiplex Inpur Ch setting to Main or Sub (page 69). The functions dont work To use , you must make an connection and an analog audio connection (RCA) between the component and AV receiver, even if they are connected digitally (page 40). The following settings can be made for the S-Video and composite video inputs You must use the buttons on the unit to make these settings. 1. While holding down the input selector button for the input source that you want to set, press the [SETUP] button. 2. Use the Left and Right [ ]/[ ] buttons to change the setting. 3. Press the [SETUP] button when youve nished. Video Attenuation This setting can be made for the DVD, VCR/DVR, CBL/SAT, or AUX input. If you have a games console connected to the S-Video or composite video input, and the picture isnt very clear, you can attenuate the gain. Video ATT:0: (default). Video ATT:2: Gain is reduced by 2 dB.

page 83

8. Lock Setup Lock Unlocked

page 73

5. Listening Mode Preset 1. DVD 2. VCR/DVR 3. CBL/SAT 4. AUX 5. TAPE 6. TUNER 7. CD 8. DOCK
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8163 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ ONKYO EUROPE ELECTRONICS GmbH Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.eu.onkyo.com/ ONKYO EUROPE UK Office Suite 1, Gregories Court, Gregories Road, Beaconsfield, Buckinghamshire, HP9 1HQ UNITED KINGDOM Tel: +44-(0)1494-681515 Fax: +44(0)-1494-680452 ONKYO CHINA LIMITED Unit 1&12, 9/F, Ever Gain PlazaTower 1, 88, Container Port Road, Kwai Chung, N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.ch.onkyo.com/
HOMEPAGE http://www.onkyo.com/

I0807-2

SN 29344677A
(C) Copyright 2008 ONKYO CORPORATION Japan. All rights reserved.

 

Tags

7FF1AW TR118 Fusion HD Harmony 600 Autometer III SRU7060 LE40S71B 5550 CA ICD-SX900 21PT350A Vitopend 100 608 WL 2060 Isdn SE-205 Malibu CDP-CE105 Alive NS-LCD42HD FX6000 YST-SW45 GZ400 LE40C652l2K MP-9485SA Olympus E-10 240 Euro Spectramagic NX Dimage E500 CX7525 Comfort AVR 745 Engines BMW 520I T803V Yamaha MU50 D5060 DMR-EH50 KF-E42a10 GO 930 3d Nokia N76 ART SLA1 DUO MCM204 96820 MDX-CA680X AR-NS1 Wl-578 WII Coolpix P80 Coupe 240V IHP-120 BMW M3 CX-830 UX-108 178 All-IN-ONE 40004074 Model 1091 JD-V33CL LP-7900 Seiko 5M43 21PT5408 NSA-210 Review ZKG2105 KV-25RE10K Canon DC20 SC-BT730 Receiver Campus MC561 W1930 KX-F880 Specs Curve 9300 Hdmi Problems WD-1050F RS55xdpsw DVR-310 MA351 Adat-RMB Nikon F3 PS50C430a1 KDL-46XBR9 RDR-HX825 WIP330 A105-S2081 Matrix 1000 Europe M3 2002 Contour-2000 RSH5zlbg CD1352S-05 Wallas 2467 SCX-4300 ETS Easypix PX50 BD316 99-02 TX1502 71003 Tecra 8000 Trip 2 Dslr-A700P

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101