linux and tools for LANDISK(SH4) - PukiWiki Plus!

Seite 1 von 14

linux and tools for LANDISK(SH4)
http://eggplant.ddo.jp/www/pukiwiki/index.php?linux%20and%20tools%20for%20LANDISK%28SH4%29

Target Hardware

IO-DATA LANDISK Series This project's goal is to turn the IO-Data Network Attached Storage device into an freely accessible Linux box. The device is available in several configurations: JP model HDL-U Series(Production end in March, 2006), LAN Tank US model UHDL-160U, UHDL-300U EU model (OEM) PX-EH25L, PX-EH40L (landisk_telnetd_v2.0.zip is available.) Storage-less model(compact flash media (Micro Drive) model) USL-5P Specification Processor: SH4 266MHz(SH7751R) Interface: 2 channels USB 2.0 Storage Capacity: HDD 160GB (HDL-160U), 250GB, 300GB, 400GB Network Interface: 100BASE-TX/10BASE-T The device comes with a Linux 2.4 inside. There is the possibility to update to 2.6 and it is also possible to install Debian in a different partition. This gives you the choice at startup to either boot as original or as a Debian system. In case of booting Debian, you will not have the original functions, like user accounts, NAS, FTP, etc, but instead a lot of other functions as you can install the software packages.

Linux Kernel

The original OS is linux-sh-2.4.21. A new version linux-sh-2.6.16 is available from the linuxSH homepage. The sourcecode for LANDISK target available here.
debian26 userland for SH4
What is debian26 We are calling this userland debian26 in locals. debian etch at Nov 2005
http://eggplant.ddo.jp/www/pukiwiki/index.php?linux%20and%20tools%20for%20LANDISK(SH4)

02.10.2006

compiled by gcc-4.0.2 The linuxSH kernel 2.6 image is included. Xorg-X11 with USB2VGAs Support for connecting VGA display. About 1900 debian packages compiled for SH4 can be used. Archive base(etch) kernel source base26-sh4-20060329-etch.tgz linux-2.6.16-sh-landisk.0.1.tgz Remarks linux-2.6.16-landisk.0.1 & landisk-tools-20051110 included linux-2.6.16.1 + LinuxSH

Seite 2 von 14

base26-sh4-xxxxxxxx-etch.tgz archive contains the following. Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name Version Description +++-======================-=====================-============================================ ii adduser 3.77 Add and remove users and groups ii apt 0.6.42.1 Advanced front-end for dpkg ii apt-utils 0.6.42.1 APT utility programs ii aptitude 0.2.15.9-7 terminal-based apt frontend ii at 3.1.9 Delayed job execution and batch processing ii base-config 2.73 Debian base system configurator ii base-files 3.1.9 Debian base system miscellaneous files ii base-passwd 3.5.10 Debian base system master password and group ii bash 3.0-17 The GNU Bourne Again SHell ii bsdmainutils 6.1.2 collection of more utilities from FreeBSD ii bsdutils 2.12p-8 Basic utilities from 4.4BSD-Lite ii console-common 0.7.54 Basic infrastructure for text console config ii console-data 2002.12.04dbs-49 Keymaps, fonts, charset maps, fallback table ii console-tools 0.2.3dbs-57 Linux console and font utilities ii coreutils 5.2.1-2.1 The GNU core utilities ii cpio 2.6-9 GNU cpio -- a program to manage archives of ii cron 3.0pl1-91 management of regular background processing ii debconf 1.4.58 Debian configuration management system ii debconf-i18n 1.4.58 full internationalization support for debcon
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii debianutils dhcp-client diff dpkg dselect e2fslibs e2fsprogs ed exim4 exim4-base exim4-config exim4-daemon-light findutils gcc-4.0-base gettext-base gpgv-udeb grep groff-base gzip hostname hotplug ifupdown info initscripts iptables iputils-ping kernel-image-2.6.16-sh kexec-tools klogd laptop-detect libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libcap1 libcomerr2 libconsole 2.15 2.0pl5-19.1 2.8.1-11 1.13.11 1.13.11 1.38-2 1.38-2 0.2-20 4.54-1 4.54-1 4.54-1 4.54-1 4.2.25-1 4.0.2-2 0.14.5-2 1.4.1-1 2.5.1.ds2-2 1.18.1.1-10 1.3.5-12 2.91 0.0.20040329-25 0.6.7 4.8-1 2.86.ds1-4 1.3.3-2 20020927-3 landisk.0.1 1.101-2sh 1.4.1-17 0.12.1 2.2.32-1 2.4.25-1 1.38-2 1.0.2-10 2.3.5-8 1.10-14 1.38-2 0.2.3dbs-57

Seite 3 von 14

Miscellaneous utilities specific to Debian DHCP Client File comparison utilities package maintenance system for Debian user tool to manage Debian packages ext2 filesystem libraries ext2 file system utilities and libraries The classic unix line editor metapackage to ease exim MTA (v4) installati support files for all exim MTA (v4) packages configuration for the exim MTA (v4) lightweight exim MTA (v4) daemon utilities for finding files--find, xargs, an The GNU Compiler Collection (base package) GNU Internationalization utilities for the b minimal signature verification tool GNU grep, egrep and fgrep GNU troff text-formatting system (base syste The GNU compression utility utility to set/show the host name or domain Linux Hotplug Scripts high level tools to configure network interf Standalone GNU Info documentation browser Standard scripts needed for booting and shut Linux kernel 2.4+ iptables administration to Tools to test the reachability of network ho Linux kernel binary image for version 2.6.16 kexec tool Kernel Logging Daemon attempt to detect a laptop Access control list shared library Extended attribute shared library block device id library high-quality block-sorting file compressor l GNU C Library: Shared libraries and Timezone support for getting/setting POSIX.1e capabil common error description library Shared libraries for Linux console and font
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii libdb2 libdb3 libdb4.2 libdb4.3 libgcc1 libgcrypt11 libgdbm3 libgnutls11 libgpg-error0 libident libkrb53 libldap2 liblocale-gettext-perl liblockfile1 liblzo1 libncurses5 libncursesw5 libnewt0.51 libopencdk8 libpam-modules libpam-runtime libpam0g libpcre3 libpopt0 libsasl2 libsasl2-modules libselinux1 libsepol1 libsigc++-1.2-5c2 libslang2 libss2 libssl0.9.7 libssl0.9.8 libstdc++6 libtasn1-2 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl 2.7.7.0-10 3.2.9-22 4.2.52-18 4.3.28-2 4.0.2-2 1.2.2-1 1.8.3-2 1.0.16-14 1.1-4 0.22-3 1.3.6-5 2.1.30-12 1.05-1 1.06 1.08-2 5.4-9 5.4-9 0.51.6-31 0.5.7-2 0.79-3 0.79-3 0.79-3 6.4-1 1.7-5 2.1.19-1.7 2.1.19-1.7 1.26-1 1.8-1 1.2.5-5 2.0.4-7 1.38-2 0.9.7g-5 0.9.8a-3 4.0.2-2 0.2.13-1 0.04-3 1.4-2 0.06-4

Seite 4 von 14

The Berkeley database routines (run-time fil Berkeley v3 Database Libraries [runtime] Berkeley v4.2 Database Libraries [runtime] Berkeley v4.3 Database Libraries [runtime] GCC support library LGPL Crypto library - runtime library GNU dbm database routines (runtime version) GNU TLS library - runtime library library for common error values and messages simple RFC1413 client library - runtime MIT Kerberos runtime libraries OpenLDAP libraries Using libc functions for internationalizatio NFS-safe locking library, includes dotlockfi data compression library Shared libraries for terminal handling Shared libraries for terminal handling (wide Not Erik's Windowing Toolkit - text mode win Open Crypto Development Kit (OpenCDK) (runti Pluggable Authentication Modules for PAM Runtime support for the PAM library Pluggable Authentication Modules library Perl 5 Compatible Regular Expression Library lib for parsing cmdline parameters Authentication abstraction library Pluggable Authentication Modules for SASL SELinux shared libraries Security Enhanced Linux policy library for c type-safe Signal Framework for C++ - runtime The S-Lang programming library - runtime ver command-line interface parsing library SSL shared libraries SSL shared libraries The GNU Standard C++ Library v3 Manage ASN.1 structures (runtime) get display widths of characters on the term converts between character sets in Perl internationalized substitute of Text::Wrap
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii libtextwrap1 libusb-0.1-4 libuuid1 libwrap0 login logrotate lsb-base mailx makedev man-db manpages mawk module-init-tools modutils mount nano ncurses-base ncurses-bin net-tools netbase netkit-inetd nvi passwd perl-base procps psmisc reiserfsprogs sasl2-bin sed slang1a-utf8 sysklogd sysv-rc sysvinit tar tasksel tcpd telnetd util-linux 0.1-3 0.1.10a-21 1.38-2 7.6.dbs-8 4.0.13-1 3.7.1-2 3.0-11 8.1.2-0.20050715cvs-1 2.3.1-78 2.4.3-3 2.02-2 1.3.3-11 3.2-pre9-2 2.4.27.0-3 2.12p-8 1.3.8-2 5.4-9 5.4-9 1.60-16 4.23 0.10-10.2 1.79-22 4.0.13-1 5.8.7-7 3.2.5-1 21.6-1 3.6.19-1 2.1.19-1.7 4.1.2-8 1.4.9dbs-8 1.4.1-17 2.86.ds1-4 2.86.ds1-4 1.15.1-2 2.32 7.6.dbs-8 0.17-32 2.12p-8

Seite 5 von 14

text-wrapping library with i18n - runtime userspace USB programming library universally unique id library Wietse Venema's TCP wrappers library system login tools Log rotation utility Linux Standard Base 3.0 init script function A simple mail user agent creates device files in /dev The on-line manual pager Manual pages about using a GNU/Linux system a pattern scanning and text processing langu tools for managing Linux kernel modules Linux module utilities Tools for mounting and manipulating filesyst free Pico clone with some new features Descriptions of common terminal types Terminal-related programs and man pages The NET-3 networking toolkit Basic TCP/IP networking system The Internet Superserver 4.4BSD re-implementation of vi change and administer password and group dat The Pathologically Eclectic Rubbish Lister /proc file system utilities Utilities that use the proc filesystem User-level tools for ReiserFS filesystems Programs for manipulating the SASL users dat The GNU sed stream editor The S-Lang programming library with utf8 sup System Logging Daemon Standard boot mechanism using symlinks in /e System-V like init GNU tar Tool for selecting tasks for installation on Wietse Venema's TCP wrapper utilities The telnet server Miscellaneous system utilities

ii ii ii wget whiptail zlib1g 1.10.2-1 0.51.6-31 1.2.3-4

Seite 6 von 14

retrieves files from the web Displays user-friendly dialog boxes from she compression library - runtime

How to setup debian26

Adding telnetd to the original system IP address is set from the menu of LANDISK.(Password is "landisk"). A new user "landisk" is made from the menu of LANDISK. Next, download landisk_telnetd_v2.0.zip from the web site "wizd on LANDISK". ( It is unzipped and update.tgz is retrieved. Update the firmware by specifying update.tgz in the menu of LANDISK. After reboot, you can telnet into the device: Open a telnetsession, connect to the Landisk IP (port 23) User account is landisk, password is "landisk". To become root, "sudo su" is executed. (root password is "landisk") To write it in rootfs, "mount -o rw,remount /" is executed. Debian26 is constructed to /dev/hda3. Install debian26 base system. # # # # cd /mnt/hda3 tar vxfzp base26-sh4-xxxxxxxx-etch.tgz mv debian26/*. rm -rf debian26
landisk_telnetd_v2.0.zip )
Some files need to be corrected. (Following is an example based on my environment. The IP in red have to be changed according to your setup.) /mnt/hda3/etc/hosts 127.0.0.1 localhost 192.168.1.81 landisk /mnt/hda3/etc/hostname
landisk /mnt/hda3/etc/resolv.conf nameserver 192.168.1.1 ( <- this is your ISP's DNS server)

Seite 7 von 14

/mnt/hda3/etc/network/interfaces # Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or # /usr/share/doc/ifupdown/examples for more information. auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.81 netmask 255.255.255.0 gateway 192.168.1.1 /mnt/hda3/etc/hosts.allow ALL : 127.0.0.1 192.168.1. 192.168.0. /mnt/hda3/etc/fstab # UNCONFIGURED FSTAB FOR BASE SYSTEM #/dev/hda4 / reiserfs defaults /dev/hda3 / ext2 defaults none /proc proc defaults /dev/hda2 swap swap defaults Setup boot-loader lilo-sh copy some files from debian26(/dev/hda3) to /dev/hda1
# mount -o rw,remount / # cp /mnt/hda3/boot/vmlinuz-2.6.16-sh /boot # cp /mnt/hda3/boot/boot.b-selk /boot /etc/lilo.conf - dual boot setting between original environment and debian26 linear boot=/dev/hda disk=/dev/hda bios=0x80 timeout=50 install=/boot/boot.b-selk default=debian26 image=/boot/zImage label=linux root=/dev/hda1 read-only append="mem=64M console=ttySC1,9600 root=/dev/hda1" image=/boot/vmlinuz-2.6.16-sh label=debian26 root=/dev/hda3 read-only append="mem=64M console=ttySC1,9600 root=/dev/hda3" Setup lilo # /mnt/hda3/sbin/lilo Added debian26 * Added linux reboot # /home/LANDISK/scripts/powerctrl.sh reboot

Seite 8 von 14

Login can be done by the telnet. Debian GNU/Linux testing/unstable landisk login: landisk Password: landisk Last login: Mon Nov 21 22:33:from 192.168.1.2 on pts/1 Linux landisk 2.6.14-sh #1 Sat Nov 12 00:03:54 JST 2005 sh4 GNU/Linux The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. landisk@landisk:~$ su Password: landisk landisk:/home/landisk# How to boot from original system : If you switch on the device, it will boot Debian from now on. However, there is still a way to boot the original linux by following procedure: turn off the power. power button ON, and quickly (max 5 seconds) power button OFF. wait a 10 second. power button ON

Seite 9 von 14

Additional setup
apt-get landisk:/# apt-get update landisk:/# landisk:/# landisk:/# landisk:/# apt-get remove gpgv-udeb apt-get install gnupg wget http://ftp-master.debian.org/ziyi_key_2006.asc apt-key add ziyi_key_2006.asc
landisk:/# apt-get update landisk:/# apt-get upgrade gcc-4.0,g++-4.0,gcc-3.4,g++-3.4,etc landisk:/# apt-get install dpkg-dev binutils gcc g++ make libncurses5-dev landisk:/# apt-get install gcc-3.4 g++-3.4 Xorg-X11 landisk:/# apt-get install x-window-system vncserver wdm etc/X11/wdm/Xservers (If you use not USB2VGA dongle but VNC. ) #:0 local /usr/bin/X11/X -nolisten TCP :0 local /usr/bin/Xrealvnc -geometry 1024x768 -depth 16 start wdm landisk:/# /etc/init.d/wdm restart Starting WINGs display manager: wdm.

Seite 10 von 14

Additional packages and source
The following apt-line can be used. deb http://eggplant.ddo.jp/www/download/debian26 etch main source : http://eggplant.ddo.jp/www/download/debian26/source/

Screenshot

http://eggplant.ddo.jp/www/pukiwiki/index.php?linux%20and%20tools%20for%20LANDISK(SH4) 02.10.2006

From VNC client.

Seite 11 von 14

linux workstation

Hardware LANDISK (HDL-160U)
USB keyboard with USB HUB USB mouse USB2VGA dongle ( http://www.winischhofer.at/linuxsisusbvga.shtml ) display Software linux-2.6.14-sh debian26 Xorg-X11custum Ver.)

Seite 12 von 14

Appendix - How to Self-build Kernel
setup landisk:~# mkdir kernel landisk:~# cd kernel landisk:~/kernel# tar vxfz linux-2.6.14-sh-landisk.0.3.tgz build landisk:~/kernel# cd linux-2.6.14.3 landisk:~/kernel/linux-2.6.14.3# cp arch/sh/configs/landisk_defconfig.config landisk:~/kernel/linux-2.6.14.3# make menuconfig landisk:~/kernel/linux-2.6.14.3# make It tests by using kexec. landisk:~/kernel/linux-2.6.14.3# kexec arch/sh/boot/zImage

Appendix - debian Cross-toolchain on Intel machine
http://eggplant.ddo.jp/www/download/debian26/CROSS/ It contains the following. Please install it by the dpkg -i *.deb command.
binutils-sh4-linux_2.16.1-2_i386.deb cpp-3.4-sh4-linux_3.4.4-5_i386.deb g++-3.4-sh4-linux_3.4.4-5_i386.deb gcc-3.4-sh4-linux_3.4.4-5_i386.deb libstdc++6-dev-sh4-cross_3.4.4-5_all.deb libstdc++6-sh4-cross_3.4.4-5_all.deb cpp-4.0-sh4-linux_4.0.2-2_i386.deb g++-4.0-sh4-linux_4.0.2-2_i386.deb gcc-4.0-sh4-linux_4.0.2-2_i386.deb libstdc++6-4.0-dev-sh4-cross_4.0.2-2_all.deb libstdc++6-dev-sh4-cross_3.4.4-5_all.deb libc6-dev-sh4-cross_2.3.5-7_all.deb libc6-sh4-cross_2.3.5-7_all.deb libdb1-compat-sh4-cross_2.1.3-7_all.deb libgcc1-sh4-cross_4.0.2-2_all.deb libncurses5-dev-sh4-cross_5.4-4_all.deb libncurses5-sh4-cross_5.4-4_all.deb linux-kernel-headers-sh4-cross_2.6.13+0rc3-2_all.deb

Seite 13 von 14

Appendix - More Information
The following are my Japanese pages. The automatic translation by Excite No translation

comment

Thank you so much, works great for my Plextor drive -- NPM? 2006-08-30 () 22:34:17 Hi, I have a HDL-GX300, but broke my rc.local during hacking into it. Do you have any idea, who could help me? (Or who has an backup?) -- Jan? 2006-05-10 () 23:03:20 HDL-GX300 is not SH architecture but ARM. Therefore, the HDL-GX300 user will not visit this page. -- kogiidena?

2006-05-10 () 23:29:05

PLEXTOR OEM Model Reviews -- kinneko? 2006-03-30 () 09:13:08 http://www.benscustomcases.com/index.php?option=com_content&task=view&id=2328&Itemid=40 http://www.cluboc.net/reviews/hard_drives/Plextor/PX-EH25L/index.htm

Seite 14 von 14

Hi. I'm from Germany and the urls don't work for me. i'm told the country code was not known. -- guest1? 2006-03-29

() 23:37:55

Don't mind. What is necessary is to read only the place which can be read. -- kinneko? 2006-03-30 () 09:13:
Last-modified: Mon, 02 Oct 2006 19:52:57 JST (3h)
Webmaster: kogiidena PukiWiki Plus! 1.4.6-u2-i18n Copyright 2001-2006 PukiWiki Plus! Team. License is GPL. Based on "PukiWiki". Powered by PHP 4.4.1. HTML convert time: 0.596 sec.

Transparent

Data Sheet (December 2005)

Product description

Nuroll PXEH is a bi-axially oriented polyester (BOPET) film with one side high corona treated for the improvement of adhesion of inks and adhesives.

Plain Surface

Film Core

Corona treated surface

Technical details
Nuroll PXEH is usually supplied with following characteristics: Core diameter: 6 inches (152.76 mm) Film width: min 330 mm, max 2400mm Film length: According with film thickness, max external reel diameter (640mm), max reel weight (1000 kg)
Substrate Thickness (microns) Max Reel lenght (m) 50 6000
Packing presentation: suspended reel; wooden endboards, lid and pallet; stretchable PE film Different characteristics than the above on request

Storage conditions

Nuroll PXEH need to be stocked in close warehouse and preserved from the light and from the humidity. Reels must be not stacked Nuroll will not accept any responsibility for material older than 1 year from the delivering
Compliance with regulations
Polyester Film produced by Nuroll SpA, complies with EEC, Italian and FDA requirements on packaging for direct contact with foodstuffs

Typical Properties

Properties Thickness Density Area Yield

Microns g/cm3 m2/kg

Test Method
ASTM E 252 ASTM D1505 ASTM E 252
Typical values 12 1,395 59,15 1,395 46,110 1,3 0,8 0,1,395 37,120 1,3 0,6 0,4 3,23 1,395 31,120 1,3 0,6 0,4 3,36 1,395 19,130 1,4 0,8 0,4 4,50 1,395 14,130 1,4 0,8 0,54

Tensile strength

ASTM D 882

250 130

% ASTM D 882

Elongation at Break

110 1,3

% ASTM 1204

Thermal Shrinkage 150C-30' C.O.F Haze
TD Film/Film ASTM D1894 % ASTM D1003

0,8 0,54

MVTR (38C, 90%RH) OTR (20C, 0%RH) Surface tension on Corona treated side
g/m2*day ASTM E398 cc/m2*day ASTM D3985 Dynes/cm2 ASTM D2578
This information is the best currently available on product and it is subject to revision as additional knowledge and experience is gained. The results obtained and the above properties refer to average value of laboratory tests. Therefore, such results have only to be considered as an indicative general guide to material properties and not as an implied guarantee that the product actually has said properties and/or a warranty of fitness for a particular purposes and/or suggestion for infringement of any existing patents. Due to many factors which may affect customer production process, including but not limited by different equipments and techniques used, PXEH film must be qualified before being used in any application.
Nuroll S.p.A (Production site) Strada Conte, 81052 Pignataro Maggiore (CE) Italy - Tel: +390823654090, Fax: +390823654091 (Commercial Department) Loc. Ribrocca , SN 15057 Tortona (AL) Italy - Tel: +390131810450, Fax: +390131822726